linux/drivers/tty/synclinkmp.c
<<
>>
Prefs
   1/*
   2 * $Id: synclinkmp.c,v 4.38 2005/07/15 13:29:44 paulkf Exp $
   3 *
   4 * Device driver for Microgate SyncLink Multiport
   5 * high speed multiprotocol serial adapter.
   6 *
   7 * written by Paul Fulghum for Microgate Corporation
   8 * paulkf@microgate.com
   9 *
  10 * Microgate and SyncLink are trademarks of Microgate Corporation
  11 *
  12 * Derived from serial.c written by Theodore Ts'o and Linus Torvalds
  13 * This code is released under the GNU General Public License (GPL)
  14 *
  15 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
  16 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
  17 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  18 * DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
  19 * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
  20 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
  21 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  22 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  23 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
  24 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
  25 * OF THE POSSIBILITY OF SUCH DAMAGE.
  26 */
  27
  28#define VERSION(ver,rel,seq) (((ver)<<16) | ((rel)<<8) | (seq))
  29#if defined(__i386__)
  30#  define BREAKPOINT() asm("   int $3");
  31#else
  32#  define BREAKPOINT() { }
  33#endif
  34
  35#define MAX_DEVICES 12
  36
  37#include <linux/module.h>
  38#include <linux/errno.h>
  39#include <linux/signal.h>
  40#include <linux/sched.h>
  41#include <linux/timer.h>
  42#include <linux/interrupt.h>
  43#include <linux/pci.h>
  44#include <linux/tty.h>
  45#include <linux/tty_flip.h>
  46#include <linux/serial.h>
  47#include <linux/major.h>
  48#include <linux/string.h>
  49#include <linux/fcntl.h>
  50#include <linux/ptrace.h>
  51#include <linux/ioport.h>
  52#include <linux/mm.h>
  53#include <linux/seq_file.h>
  54#include <linux/slab.h>
  55#include <linux/netdevice.h>
  56#include <linux/vmalloc.h>
  57#include <linux/init.h>
  58#include <linux/delay.h>
  59#include <linux/ioctl.h>
  60
  61#include <asm/io.h>
  62#include <asm/irq.h>
  63#include <asm/dma.h>
  64#include <linux/bitops.h>
  65#include <asm/types.h>
  66#include <linux/termios.h>
  67#include <linux/workqueue.h>
  68#include <linux/hdlc.h>
  69#include <linux/synclink.h>
  70
  71#if defined(CONFIG_HDLC) || (defined(CONFIG_HDLC_MODULE) && defined(CONFIG_SYNCLINKMP_MODULE))
  72#define SYNCLINK_GENERIC_HDLC 1
  73#else
  74#define SYNCLINK_GENERIC_HDLC 0
  75#endif
  76
  77#define GET_USER(error,value,addr) error = get_user(value,addr)
  78#define COPY_FROM_USER(error,dest,src,size) error = copy_from_user(dest,src,size) ? -EFAULT : 0
  79#define PUT_USER(error,value,addr) error = put_user(value,addr)
  80#define COPY_TO_USER(error,dest,src,size) error = copy_to_user(dest,src,size) ? -EFAULT : 0
  81
  82#include <asm/uaccess.h>
  83
  84static MGSL_PARAMS default_params = {
  85        MGSL_MODE_HDLC,                 /* unsigned long mode */
  86        0,                              /* unsigned char loopback; */
  87        HDLC_FLAG_UNDERRUN_ABORT15,     /* unsigned short flags; */
  88        HDLC_ENCODING_NRZI_SPACE,       /* unsigned char encoding; */
  89        0,                              /* unsigned long clock_speed; */
  90        0xff,                           /* unsigned char addr_filter; */
  91        HDLC_CRC_16_CCITT,              /* unsigned short crc_type; */
  92        HDLC_PREAMBLE_LENGTH_8BITS,     /* unsigned char preamble_length; */
  93        HDLC_PREAMBLE_PATTERN_NONE,     /* unsigned char preamble; */
  94        9600,                           /* unsigned long data_rate; */
  95        8,                              /* unsigned char data_bits; */
  96        1,                              /* unsigned char stop_bits; */
  97        ASYNC_PARITY_NONE               /* unsigned char parity; */
  98};
  99
 100/* size in bytes of DMA data buffers */
 101#define SCABUFSIZE      1024
 102#define SCA_MEM_SIZE    0x40000
 103#define SCA_BASE_SIZE   512
 104#define SCA_REG_SIZE    16
 105#define SCA_MAX_PORTS   4
 106#define SCAMAXDESC      128
 107
 108#define BUFFERLISTSIZE  4096
 109
 110/* SCA-I style DMA buffer descriptor */
 111typedef struct _SCADESC
 112{
 113        u16     next;           /* lower l6 bits of next descriptor addr */
 114        u16     buf_ptr;        /* lower 16 bits of buffer addr */
 115        u8      buf_base;       /* upper 8 bits of buffer addr */
 116        u8      pad1;
 117        u16     length;         /* length of buffer */
 118        u8      status;         /* status of buffer */
 119        u8      pad2;
 120} SCADESC, *PSCADESC;
 121
 122typedef struct _SCADESC_EX
 123{
 124        /* device driver bookkeeping section */
 125        char    *virt_addr;     /* virtual address of data buffer */
 126        u16     phys_entry;     /* lower 16-bits of physical address of this descriptor */
 127} SCADESC_EX, *PSCADESC_EX;
 128
 129/* The queue of BH actions to be performed */
 130
 131#define BH_RECEIVE  1
 132#define BH_TRANSMIT 2
 133#define BH_STATUS   4
 134
 135#define IO_PIN_SHUTDOWN_LIMIT 100
 136
 137struct  _input_signal_events {
 138        int     ri_up;
 139        int     ri_down;
 140        int     dsr_up;
 141        int     dsr_down;
 142        int     dcd_up;
 143        int     dcd_down;
 144        int     cts_up;
 145        int     cts_down;
 146};
 147
 148/*
 149 * Device instance data structure
 150 */
 151typedef struct _synclinkmp_info {
 152        void *if_ptr;                           /* General purpose pointer (used by SPPP) */
 153        int                     magic;
 154        struct tty_port         port;
 155        int                     line;
 156        unsigned short          close_delay;
 157        unsigned short          closing_wait;   /* time to wait before closing */
 158
 159        struct mgsl_icount      icount;
 160
 161        int                     timeout;
 162        int                     x_char;         /* xon/xoff character */
 163        u16                     read_status_mask1;  /* break detection (SR1 indications) */
 164        u16                     read_status_mask2;  /* parity/framing/overun (SR2 indications) */
 165        unsigned char           ignore_status_mask1;  /* break detection (SR1 indications) */
 166        unsigned char           ignore_status_mask2;  /* parity/framing/overun (SR2 indications) */
 167        unsigned char           *tx_buf;
 168        int                     tx_put;
 169        int                     tx_get;
 170        int                     tx_count;
 171
 172        wait_queue_head_t       status_event_wait_q;
 173        wait_queue_head_t       event_wait_q;
 174        struct timer_list       tx_timer;       /* HDLC transmit timeout timer */
 175        struct _synclinkmp_info *next_device;   /* device list link */
 176        struct timer_list       status_timer;   /* input signal status check timer */
 177
 178        spinlock_t lock;                /* spinlock for synchronizing with ISR */
 179        struct work_struct task;                        /* task structure for scheduling bh */
 180
 181        u32 max_frame_size;                     /* as set by device config */
 182
 183        u32 pending_bh;
 184
 185        bool bh_running;                                /* Protection from multiple */
 186        int isr_overflow;
 187        bool bh_requested;
 188
 189        int dcd_chkcount;                       /* check counts to prevent */
 190        int cts_chkcount;                       /* too many IRQs if a signal */
 191        int dsr_chkcount;                       /* is floating */
 192        int ri_chkcount;
 193
 194        char *buffer_list;                      /* virtual address of Rx & Tx buffer lists */
 195        unsigned long buffer_list_phys;
 196
 197        unsigned int rx_buf_count;              /* count of total allocated Rx buffers */
 198        SCADESC *rx_buf_list;                   /* list of receive buffer entries */
 199        SCADESC_EX rx_buf_list_ex[SCAMAXDESC]; /* list of receive buffer entries */
 200        unsigned int current_rx_buf;
 201
 202        unsigned int tx_buf_count;              /* count of total allocated Tx buffers */
 203        SCADESC *tx_buf_list;           /* list of transmit buffer entries */
 204        SCADESC_EX tx_buf_list_ex[SCAMAXDESC]; /* list of transmit buffer entries */
 205        unsigned int last_tx_buf;
 206
 207        unsigned char *tmp_rx_buf;
 208        unsigned int tmp_rx_buf_count;
 209
 210        bool rx_enabled;
 211        bool rx_overflow;
 212
 213        bool tx_enabled;
 214        bool tx_active;
 215        u32 idle_mode;
 216
 217        unsigned char ie0_value;
 218        unsigned char ie1_value;
 219        unsigned char ie2_value;
 220        unsigned char ctrlreg_value;
 221        unsigned char old_signals;
 222
 223        char device_name[25];                   /* device instance name */
 224
 225        int port_count;
 226        int adapter_num;
 227        int port_num;
 228
 229        struct _synclinkmp_info *port_array[SCA_MAX_PORTS];
 230
 231        unsigned int bus_type;                  /* expansion bus type (ISA,EISA,PCI) */
 232
 233        unsigned int irq_level;                 /* interrupt level */
 234        unsigned long irq_flags;
 235        bool irq_requested;                     /* true if IRQ requested */
 236
 237        MGSL_PARAMS params;                     /* communications parameters */
 238
 239        unsigned char serial_signals;           /* current serial signal states */
 240
 241        bool irq_occurred;                      /* for diagnostics use */
 242        unsigned int init_error;                /* Initialization startup error */
 243
 244        u32 last_mem_alloc;
 245        unsigned char* memory_base;             /* shared memory address (PCI only) */
 246        u32 phys_memory_base;
 247        int shared_mem_requested;
 248
 249        unsigned char* sca_base;                /* HD64570 SCA Memory address */
 250        u32 phys_sca_base;
 251        u32 sca_offset;
 252        bool sca_base_requested;
 253
 254        unsigned char* lcr_base;                /* local config registers (PCI only) */
 255        u32 phys_lcr_base;
 256        u32 lcr_offset;
 257        int lcr_mem_requested;
 258
 259        unsigned char* statctrl_base;           /* status/control register memory */
 260        u32 phys_statctrl_base;
 261        u32 statctrl_offset;
 262        bool sca_statctrl_requested;
 263
 264        u32 misc_ctrl_value;
 265        char *flag_buf;
 266        bool drop_rts_on_tx_done;
 267
 268        struct  _input_signal_events    input_signal_events;
 269
 270        /* SPPP/Cisco HDLC device parts */
 271        int netcount;
 272        spinlock_t netlock;
 273
 274#if SYNCLINK_GENERIC_HDLC
 275        struct net_device *netdev;
 276#endif
 277
 278} SLMP_INFO;
 279
 280#define MGSL_MAGIC 0x5401
 281
 282/*
 283 * define serial signal status change macros
 284 */
 285#define MISCSTATUS_DCD_LATCHED  (SerialSignal_DCD<<8)   /* indicates change in DCD */
 286#define MISCSTATUS_RI_LATCHED   (SerialSignal_RI<<8)    /* indicates change in RI */
 287#define MISCSTATUS_CTS_LATCHED  (SerialSignal_CTS<<8)   /* indicates change in CTS */
 288#define MISCSTATUS_DSR_LATCHED  (SerialSignal_DSR<<8)   /* change in DSR */
 289
 290/* Common Register macros */
 291#define LPR     0x00
 292#define PABR0   0x02
 293#define PABR1   0x03
 294#define WCRL    0x04
 295#define WCRM    0x05
 296#define WCRH    0x06
 297#define DPCR    0x08
 298#define DMER    0x09
 299#define ISR0    0x10
 300#define ISR1    0x11
 301#define ISR2    0x12
 302#define IER0    0x14
 303#define IER1    0x15
 304#define IER2    0x16
 305#define ITCR    0x18
 306#define INTVR   0x1a
 307#define IMVR    0x1c
 308
 309/* MSCI Register macros */
 310#define TRB     0x20
 311#define TRBL    0x20
 312#define TRBH    0x21
 313#define SR0     0x22
 314#define SR1     0x23
 315#define SR2     0x24
 316#define SR3     0x25
 317#define FST     0x26
 318#define IE0     0x28
 319#define IE1     0x29
 320#define IE2     0x2a
 321#define FIE     0x2b
 322#define CMD     0x2c
 323#define MD0     0x2e
 324#define MD1     0x2f
 325#define MD2     0x30
 326#define CTL     0x31
 327#define SA0     0x32
 328#define SA1     0x33
 329#define IDL     0x34
 330#define TMC     0x35
 331#define RXS     0x36
 332#define TXS     0x37
 333#define TRC0    0x38
 334#define TRC1    0x39
 335#define RRC     0x3a
 336#define CST0    0x3c
 337#define CST1    0x3d
 338
 339/* Timer Register Macros */
 340#define TCNT    0x60
 341#define TCNTL   0x60
 342#define TCNTH   0x61
 343#define TCONR   0x62
 344#define TCONRL  0x62
 345#define TCONRH  0x63
 346#define TMCS    0x64
 347#define TEPR    0x65
 348
 349/* DMA Controller Register macros */
 350#define DARL    0x80
 351#define DARH    0x81
 352#define DARB    0x82
 353#define BAR     0x80
 354#define BARL    0x80
 355#define BARH    0x81
 356#define BARB    0x82
 357#define SAR     0x84
 358#define SARL    0x84
 359#define SARH    0x85
 360#define SARB    0x86
 361#define CPB     0x86
 362#define CDA     0x88
 363#define CDAL    0x88
 364#define CDAH    0x89
 365#define EDA     0x8a
 366#define EDAL    0x8a
 367#define EDAH    0x8b
 368#define BFL     0x8c
 369#define BFLL    0x8c
 370#define BFLH    0x8d
 371#define BCR     0x8e
 372#define BCRL    0x8e
 373#define BCRH    0x8f
 374#define DSR     0x90
 375#define DMR     0x91
 376#define FCT     0x93
 377#define DIR     0x94
 378#define DCMD    0x95
 379
 380/* combine with timer or DMA register address */
 381#define TIMER0  0x00
 382#define TIMER1  0x08
 383#define TIMER2  0x10
 384#define TIMER3  0x18
 385#define RXDMA   0x00
 386#define TXDMA   0x20
 387
 388/* SCA Command Codes */
 389#define NOOP            0x00
 390#define TXRESET         0x01
 391#define TXENABLE        0x02
 392#define TXDISABLE       0x03
 393#define TXCRCINIT       0x04
 394#define TXCRCEXCL       0x05
 395#define TXEOM           0x06
 396#define TXABORT         0x07
 397#define MPON            0x08
 398#define TXBUFCLR        0x09
 399#define RXRESET         0x11
 400#define RXENABLE        0x12
 401#define RXDISABLE       0x13
 402#define RXCRCINIT       0x14
 403#define RXREJECT        0x15
 404#define SEARCHMP        0x16
 405#define RXCRCEXCL       0x17
 406#define RXCRCCALC       0x18
 407#define CHRESET         0x21
 408#define HUNT            0x31
 409
 410/* DMA command codes */
 411#define SWABORT         0x01
 412#define FEICLEAR        0x02
 413
 414/* IE0 */
 415#define TXINTE          BIT7
 416#define RXINTE          BIT6
 417#define TXRDYE          BIT1
 418#define RXRDYE          BIT0
 419
 420/* IE1 & SR1 */
 421#define UDRN    BIT7
 422#define IDLE    BIT6
 423#define SYNCD   BIT4
 424#define FLGD    BIT4
 425#define CCTS    BIT3
 426#define CDCD    BIT2
 427#define BRKD    BIT1
 428#define ABTD    BIT1
 429#define GAPD    BIT1
 430#define BRKE    BIT0
 431#define IDLD    BIT0
 432
 433/* IE2 & SR2 */
 434#define EOM     BIT7
 435#define PMP     BIT6
 436#define SHRT    BIT6
 437#define PE      BIT5
 438#define ABT     BIT5
 439#define FRME    BIT4
 440#define RBIT    BIT4
 441#define OVRN    BIT3
 442#define CRCE    BIT2
 443
 444
 445/*
 446 * Global linked list of SyncLink devices
 447 */
 448static SLMP_INFO *synclinkmp_device_list = NULL;
 449static int synclinkmp_adapter_count = -1;
 450static int synclinkmp_device_count = 0;
 451
 452/*
 453 * Set this param to non-zero to load eax with the
 454 * .text section address and breakpoint on module load.
 455 * This is useful for use with gdb and add-symbol-file command.
 456 */
 457static bool break_on_load = 0;
 458
 459/*
 460 * Driver major number, defaults to zero to get auto
 461 * assigned major number. May be forced as module parameter.
 462 */
 463static int ttymajor = 0;
 464
 465/*
 466 * Array of user specified options for ISA adapters.
 467 */
 468static int debug_level = 0;
 469static int maxframe[MAX_DEVICES] = {0,};
 470
 471module_param(break_on_load, bool, 0);
 472module_param(ttymajor, int, 0);
 473module_param(debug_level, int, 0);
 474module_param_array(maxframe, int, NULL, 0);
 475
 476static char *driver_name = "SyncLink MultiPort driver";
 477static char *driver_version = "$Revision: 4.38 $";
 478
 479static int synclinkmp_init_one(struct pci_dev *dev,const struct pci_device_id *ent);
 480static void synclinkmp_remove_one(struct pci_dev *dev);
 481
 482static struct pci_device_id synclinkmp_pci_tbl[] = {
 483        { PCI_VENDOR_ID_MICROGATE, PCI_DEVICE_ID_MICROGATE_SCA, PCI_ANY_ID, PCI_ANY_ID, },
 484        { 0, }, /* terminate list */
 485};
 486MODULE_DEVICE_TABLE(pci, synclinkmp_pci_tbl);
 487
 488MODULE_LICENSE("GPL");
 489
 490static struct pci_driver synclinkmp_pci_driver = {
 491        .name           = "synclinkmp",
 492        .id_table       = synclinkmp_pci_tbl,
 493        .probe          = synclinkmp_init_one,
 494        .remove         = synclinkmp_remove_one,
 495};
 496
 497
 498static struct tty_driver *serial_driver;
 499
 500/* number of characters left in xmit buffer before we ask for more */
 501#define WAKEUP_CHARS 256
 502
 503
 504/* tty callbacks */
 505
 506static int  open(struct tty_struct *tty, struct file * filp);
 507static void close(struct tty_struct *tty, struct file * filp);
 508static void hangup(struct tty_struct *tty);
 509static void set_termios(struct tty_struct *tty, struct ktermios *old_termios);
 510
 511static int  write(struct tty_struct *tty, const unsigned char *buf, int count);
 512static int put_char(struct tty_struct *tty, unsigned char ch);
 513static void send_xchar(struct tty_struct *tty, char ch);
 514static void wait_until_sent(struct tty_struct *tty, int timeout);
 515static int  write_room(struct tty_struct *tty);
 516static void flush_chars(struct tty_struct *tty);
 517static void flush_buffer(struct tty_struct *tty);
 518static void tx_hold(struct tty_struct *tty);
 519static void tx_release(struct tty_struct *tty);
 520
 521static int  ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg);
 522static int  chars_in_buffer(struct tty_struct *tty);
 523static void throttle(struct tty_struct * tty);
 524static void unthrottle(struct tty_struct * tty);
 525static int set_break(struct tty_struct *tty, int break_state);
 526
 527#if SYNCLINK_GENERIC_HDLC
 528#define dev_to_port(D) (dev_to_hdlc(D)->priv)
 529static void hdlcdev_tx_done(SLMP_INFO *info);
 530static void hdlcdev_rx(SLMP_INFO *info, char *buf, int size);
 531static int  hdlcdev_init(SLMP_INFO *info);
 532static void hdlcdev_exit(SLMP_INFO *info);
 533#endif
 534
 535/* ioctl handlers */
 536
 537static int  get_stats(SLMP_INFO *info, struct mgsl_icount __user *user_icount);
 538static int  get_params(SLMP_INFO *info, MGSL_PARAMS __user *params);
 539static int  set_params(SLMP_INFO *info, MGSL_PARAMS __user *params);
 540static int  get_txidle(SLMP_INFO *info, int __user *idle_mode);
 541static int  set_txidle(SLMP_INFO *info, int idle_mode);
 542static int  tx_enable(SLMP_INFO *info, int enable);
 543static int  tx_abort(SLMP_INFO *info);
 544static int  rx_enable(SLMP_INFO *info, int enable);
 545static int  modem_input_wait(SLMP_INFO *info,int arg);
 546static int  wait_mgsl_event(SLMP_INFO *info, int __user *mask_ptr);
 547static int  tiocmget(struct tty_struct *tty);
 548static int  tiocmset(struct tty_struct *tty,
 549                        unsigned int set, unsigned int clear);
 550static int  set_break(struct tty_struct *tty, int break_state);
 551
 552static void add_device(SLMP_INFO *info);
 553static void device_init(int adapter_num, struct pci_dev *pdev);
 554static int  claim_resources(SLMP_INFO *info);
 555static void release_resources(SLMP_INFO *info);
 556
 557static int  startup(SLMP_INFO *info);
 558static int  block_til_ready(struct tty_struct *tty, struct file * filp,SLMP_INFO *info);
 559static int carrier_raised(struct tty_port *port);
 560static void shutdown(SLMP_INFO *info);
 561static void program_hw(SLMP_INFO *info);
 562static void change_params(SLMP_INFO *info);
 563
 564static bool init_adapter(SLMP_INFO *info);
 565static bool register_test(SLMP_INFO *info);
 566static bool irq_test(SLMP_INFO *info);
 567static bool loopback_test(SLMP_INFO *info);
 568static int  adapter_test(SLMP_INFO *info);
 569static bool memory_test(SLMP_INFO *info);
 570
 571static void reset_adapter(SLMP_INFO *info);
 572static void reset_port(SLMP_INFO *info);
 573static void async_mode(SLMP_INFO *info);
 574static void hdlc_mode(SLMP_INFO *info);
 575
 576static void rx_stop(SLMP_INFO *info);
 577static void rx_start(SLMP_INFO *info);
 578static void rx_reset_buffers(SLMP_INFO *info);
 579static void rx_free_frame_buffers(SLMP_INFO *info, unsigned int first, unsigned int last);
 580static bool rx_get_frame(SLMP_INFO *info);
 581
 582static void tx_start(SLMP_INFO *info);
 583static void tx_stop(SLMP_INFO *info);
 584static void tx_load_fifo(SLMP_INFO *info);
 585static void tx_set_idle(SLMP_INFO *info);
 586static void tx_load_dma_buffer(SLMP_INFO *info, const char *buf, unsigned int count);
 587
 588static void get_signals(SLMP_INFO *info);
 589static void set_signals(SLMP_INFO *info);
 590static void enable_loopback(SLMP_INFO *info, int enable);
 591static void set_rate(SLMP_INFO *info, u32 data_rate);
 592
 593static int  bh_action(SLMP_INFO *info);
 594static void bh_handler(struct work_struct *work);
 595static void bh_receive(SLMP_INFO *info);
 596static void bh_transmit(SLMP_INFO *info);
 597static void bh_status(SLMP_INFO *info);
 598static void isr_timer(SLMP_INFO *info);
 599static void isr_rxint(SLMP_INFO *info);
 600static void isr_rxrdy(SLMP_INFO *info);
 601static void isr_txint(SLMP_INFO *info);
 602static void isr_txrdy(SLMP_INFO *info);
 603static void isr_rxdmaok(SLMP_INFO *info);
 604static void isr_rxdmaerror(SLMP_INFO *info);
 605static void isr_txdmaok(SLMP_INFO *info);
 606static void isr_txdmaerror(SLMP_INFO *info);
 607static void isr_io_pin(SLMP_INFO *info, u16 status);
 608
 609static int  alloc_dma_bufs(SLMP_INFO *info);
 610static void free_dma_bufs(SLMP_INFO *info);
 611static int  alloc_buf_list(SLMP_INFO *info);
 612static int  alloc_frame_bufs(SLMP_INFO *info, SCADESC *list, SCADESC_EX *list_ex,int count);
 613static int  alloc_tmp_rx_buf(SLMP_INFO *info);
 614static void free_tmp_rx_buf(SLMP_INFO *info);
 615
 616static void load_pci_memory(SLMP_INFO *info, char* dest, const char* src, unsigned short count);
 617static void trace_block(SLMP_INFO *info, const char* data, int count, int xmit);
 618static void tx_timeout(unsigned long context);
 619static void status_timeout(unsigned long context);
 620
 621static unsigned char read_reg(SLMP_INFO *info, unsigned char addr);
 622static void write_reg(SLMP_INFO *info, unsigned char addr, unsigned char val);
 623static u16 read_reg16(SLMP_INFO *info, unsigned char addr);
 624static void write_reg16(SLMP_INFO *info, unsigned char addr, u16 val);
 625static unsigned char read_status_reg(SLMP_INFO * info);
 626static void write_control_reg(SLMP_INFO * info);
 627
 628
 629static unsigned char rx_active_fifo_level = 16; // rx request FIFO activation level in bytes
 630static unsigned char tx_active_fifo_level = 16; // tx request FIFO activation level in bytes
 631static unsigned char tx_negate_fifo_level = 32; // tx request FIFO negation level in bytes
 632
 633static u32 misc_ctrl_value = 0x007e4040;
 634static u32 lcr1_brdr_value = 0x00800028;
 635
 636static u32 read_ahead_count = 8;
 637
 638/* DPCR, DMA Priority Control
 639 *
 640 * 07..05  Not used, must be 0
 641 * 04      BRC, bus release condition: 0=all transfers complete
 642 *              1=release after 1 xfer on all channels
 643 * 03      CCC, channel change condition: 0=every cycle
 644 *              1=after each channel completes all xfers
 645 * 02..00  PR<2..0>, priority 100=round robin
 646 *
 647 * 00000100 = 0x00
 648 */
 649static unsigned char dma_priority = 0x04;
 650
 651// Number of bytes that can be written to shared RAM
 652// in a single write operation
 653static u32 sca_pci_load_interval = 64;
 654
 655/*
 656 * 1st function defined in .text section. Calling this function in
 657 * init_module() followed by a breakpoint allows a remote debugger
 658 * (gdb) to get the .text address for the add-symbol-file command.
 659 * This allows remote debugging of dynamically loadable modules.
 660 */
 661static void* synclinkmp_get_text_ptr(void);
 662static void* synclinkmp_get_text_ptr(void) {return synclinkmp_get_text_ptr;}
 663
 664static inline int sanity_check(SLMP_INFO *info,
 665                               char *name, const char *routine)
 666{
 667#ifdef SANITY_CHECK
 668        static const char *badmagic =
 669                "Warning: bad magic number for synclinkmp_struct (%s) in %s\n";
 670        static const char *badinfo =
 671                "Warning: null synclinkmp_struct for (%s) in %s\n";
 672
 673        if (!info) {
 674                printk(badinfo, name, routine);
 675                return 1;
 676        }
 677        if (info->magic != MGSL_MAGIC) {
 678                printk(badmagic, name, routine);
 679                return 1;
 680        }
 681#else
 682        if (!info)
 683                return 1;
 684#endif
 685        return 0;
 686}
 687
 688/**
 689 * line discipline callback wrappers
 690 *
 691 * The wrappers maintain line discipline references
 692 * while calling into the line discipline.
 693 *
 694 * ldisc_receive_buf  - pass receive data to line discipline
 695 */
 696
 697static void ldisc_receive_buf(struct tty_struct *tty,
 698                              const __u8 *data, char *flags, int count)
 699{
 700        struct tty_ldisc *ld;
 701        if (!tty)
 702                return;
 703        ld = tty_ldisc_ref(tty);
 704        if (ld) {
 705                if (ld->ops->receive_buf)
 706                        ld->ops->receive_buf(tty, data, flags, count);
 707                tty_ldisc_deref(ld);
 708        }
 709}
 710
 711/* tty callbacks */
 712
 713static int install(struct tty_driver *driver, struct tty_struct *tty)
 714{
 715        SLMP_INFO *info;
 716        int line = tty->index;
 717
 718        if (line >= synclinkmp_device_count) {
 719                printk("%s(%d): open with invalid line #%d.\n",
 720                        __FILE__,__LINE__,line);
 721                return -ENODEV;
 722        }
 723
 724        info = synclinkmp_device_list;
 725        while (info && info->line != line)
 726                info = info->next_device;
 727        if (sanity_check(info, tty->name, "open"))
 728                return -ENODEV;
 729        if (info->init_error) {
 730                printk("%s(%d):%s device is not allocated, init error=%d\n",
 731                        __FILE__, __LINE__, info->device_name,
 732                        info->init_error);
 733                return -ENODEV;
 734        }
 735
 736        tty->driver_data = info;
 737
 738        return tty_port_install(&info->port, driver, tty);
 739}
 740
 741/* Called when a port is opened.  Init and enable port.
 742 */
 743static int open(struct tty_struct *tty, struct file *filp)
 744{
 745        SLMP_INFO *info = tty->driver_data;
 746        unsigned long flags;
 747        int retval;
 748
 749        info->port.tty = tty;
 750
 751        if (debug_level >= DEBUG_LEVEL_INFO)
 752                printk("%s(%d):%s open(), old ref count = %d\n",
 753                         __FILE__,__LINE__,tty->driver->name, info->port.count);
 754
 755        /* If port is closing, signal caller to try again */
 756        if (tty_hung_up_p(filp) || info->port.flags & ASYNC_CLOSING){
 757                if (info->port.flags & ASYNC_CLOSING)
 758                        interruptible_sleep_on(&info->port.close_wait);
 759                retval = ((info->port.flags & ASYNC_HUP_NOTIFY) ?
 760                        -EAGAIN : -ERESTARTSYS);
 761                goto cleanup;
 762        }
 763
 764        info->port.low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0;
 765
 766        spin_lock_irqsave(&info->netlock, flags);
 767        if (info->netcount) {
 768                retval = -EBUSY;
 769                spin_unlock_irqrestore(&info->netlock, flags);
 770                goto cleanup;
 771        }
 772        info->port.count++;
 773        spin_unlock_irqrestore(&info->netlock, flags);
 774
 775        if (info->port.count == 1) {
 776                /* 1st open on this device, init hardware */
 777                retval = startup(info);
 778                if (retval < 0)
 779                        goto cleanup;
 780        }
 781
 782        retval = block_til_ready(tty, filp, info);
 783        if (retval) {
 784                if (debug_level >= DEBUG_LEVEL_INFO)
 785                        printk("%s(%d):%s block_til_ready() returned %d\n",
 786                                 __FILE__,__LINE__, info->device_name, retval);
 787                goto cleanup;
 788        }
 789
 790        if (debug_level >= DEBUG_LEVEL_INFO)
 791                printk("%s(%d):%s open() success\n",
 792                         __FILE__,__LINE__, info->device_name);
 793        retval = 0;
 794
 795cleanup:
 796        if (retval) {
 797                if (tty->count == 1)
 798                        info->port.tty = NULL; /* tty layer will release tty struct */
 799                if(info->port.count)
 800                        info->port.count--;
 801        }
 802
 803        return retval;
 804}
 805
 806/* Called when port is closed. Wait for remaining data to be
 807 * sent. Disable port and free resources.
 808 */
 809static void close(struct tty_struct *tty, struct file *filp)
 810{
 811        SLMP_INFO * info = tty->driver_data;
 812
 813        if (sanity_check(info, tty->name, "close"))
 814                return;
 815
 816        if (debug_level >= DEBUG_LEVEL_INFO)
 817                printk("%s(%d):%s close() entry, count=%d\n",
 818                         __FILE__,__LINE__, info->device_name, info->port.count);
 819
 820        if (tty_port_close_start(&info->port, tty, filp) == 0)
 821                goto cleanup;
 822
 823        mutex_lock(&info->port.mutex);
 824        if (info->port.flags & ASYNC_INITIALIZED)
 825                wait_until_sent(tty, info->timeout);
 826
 827        flush_buffer(tty);
 828        tty_ldisc_flush(tty);
 829        shutdown(info);
 830        mutex_unlock(&info->port.mutex);
 831
 832        tty_port_close_end(&info->port, tty);
 833        info->port.tty = NULL;
 834cleanup:
 835        if (debug_level >= DEBUG_LEVEL_INFO)
 836                printk("%s(%d):%s close() exit, count=%d\n", __FILE__,__LINE__,
 837                        tty->driver->name, info->port.count);
 838}
 839
 840/* Called by tty_hangup() when a hangup is signaled.
 841 * This is the same as closing all open descriptors for the port.
 842 */
 843static void hangup(struct tty_struct *tty)
 844{
 845        SLMP_INFO *info = tty->driver_data;
 846        unsigned long flags;
 847
 848        if (debug_level >= DEBUG_LEVEL_INFO)
 849                printk("%s(%d):%s hangup()\n",
 850                         __FILE__,__LINE__, info->device_name );
 851
 852        if (sanity_check(info, tty->name, "hangup"))
 853                return;
 854
 855        mutex_lock(&info->port.mutex);
 856        flush_buffer(tty);
 857        shutdown(info);
 858
 859        spin_lock_irqsave(&info->port.lock, flags);
 860        info->port.count = 0;
 861        info->port.flags &= ~ASYNC_NORMAL_ACTIVE;
 862        info->port.tty = NULL;
 863        spin_unlock_irqrestore(&info->port.lock, flags);
 864        mutex_unlock(&info->port.mutex);
 865
 866        wake_up_interruptible(&info->port.open_wait);
 867}
 868
 869/* Set new termios settings
 870 */
 871static void set_termios(struct tty_struct *tty, struct ktermios *old_termios)
 872{
 873        SLMP_INFO *info = tty->driver_data;
 874        unsigned long flags;
 875
 876        if (debug_level >= DEBUG_LEVEL_INFO)
 877                printk("%s(%d):%s set_termios()\n", __FILE__,__LINE__,
 878                        tty->driver->name );
 879
 880        change_params(info);
 881
 882        /* Handle transition to B0 status */
 883        if (old_termios->c_cflag & CBAUD &&
 884            !(tty->termios.c_cflag & CBAUD)) {
 885                info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
 886                spin_lock_irqsave(&info->lock,flags);
 887                set_signals(info);
 888                spin_unlock_irqrestore(&info->lock,flags);
 889        }
 890
 891        /* Handle transition away from B0 status */
 892        if (!(old_termios->c_cflag & CBAUD) &&
 893            tty->termios.c_cflag & CBAUD) {
 894                info->serial_signals |= SerialSignal_DTR;
 895                if (!(tty->termios.c_cflag & CRTSCTS) ||
 896                    !test_bit(TTY_THROTTLED, &tty->flags)) {
 897                        info->serial_signals |= SerialSignal_RTS;
 898                }
 899                spin_lock_irqsave(&info->lock,flags);
 900                set_signals(info);
 901                spin_unlock_irqrestore(&info->lock,flags);
 902        }
 903
 904        /* Handle turning off CRTSCTS */
 905        if (old_termios->c_cflag & CRTSCTS &&
 906            !(tty->termios.c_cflag & CRTSCTS)) {
 907                tty->hw_stopped = 0;
 908                tx_release(tty);
 909        }
 910}
 911
 912/* Send a block of data
 913 *
 914 * Arguments:
 915 *
 916 *      tty             pointer to tty information structure
 917 *      buf             pointer to buffer containing send data
 918 *      count           size of send data in bytes
 919 *
 920 * Return Value:        number of characters written
 921 */
 922static int write(struct tty_struct *tty,
 923                 const unsigned char *buf, int count)
 924{
 925        int     c, ret = 0;
 926        SLMP_INFO *info = tty->driver_data;
 927        unsigned long flags;
 928
 929        if (debug_level >= DEBUG_LEVEL_INFO)
 930                printk("%s(%d):%s write() count=%d\n",
 931                       __FILE__,__LINE__,info->device_name,count);
 932
 933        if (sanity_check(info, tty->name, "write"))
 934                goto cleanup;
 935
 936        if (!info->tx_buf)
 937                goto cleanup;
 938
 939        if (info->params.mode == MGSL_MODE_HDLC) {
 940                if (count > info->max_frame_size) {
 941                        ret = -EIO;
 942                        goto cleanup;
 943                }
 944                if (info->tx_active)
 945                        goto cleanup;
 946                if (info->tx_count) {
 947                        /* send accumulated data from send_char() calls */
 948                        /* as frame and wait before accepting more data. */
 949                        tx_load_dma_buffer(info, info->tx_buf, info->tx_count);
 950                        goto start;
 951                }
 952                ret = info->tx_count = count;
 953                tx_load_dma_buffer(info, buf, count);
 954                goto start;
 955        }
 956
 957        for (;;) {
 958                c = min_t(int, count,
 959                        min(info->max_frame_size - info->tx_count - 1,
 960                            info->max_frame_size - info->tx_put));
 961                if (c <= 0)
 962                        break;
 963                        
 964                memcpy(info->tx_buf + info->tx_put, buf, c);
 965
 966                spin_lock_irqsave(&info->lock,flags);
 967                info->tx_put += c;
 968                if (info->tx_put >= info->max_frame_size)
 969                        info->tx_put -= info->max_frame_size;
 970                info->tx_count += c;
 971                spin_unlock_irqrestore(&info->lock,flags);
 972
 973                buf += c;
 974                count -= c;
 975                ret += c;
 976        }
 977
 978        if (info->params.mode == MGSL_MODE_HDLC) {
 979                if (count) {
 980                        ret = info->tx_count = 0;
 981                        goto cleanup;
 982                }
 983                tx_load_dma_buffer(info, info->tx_buf, info->tx_count);
 984        }
 985start:
 986        if (info->tx_count && !tty->stopped && !tty->hw_stopped) {
 987                spin_lock_irqsave(&info->lock,flags);
 988                if (!info->tx_active)
 989                        tx_start(info);
 990                spin_unlock_irqrestore(&info->lock,flags);
 991        }
 992
 993cleanup:
 994        if (debug_level >= DEBUG_LEVEL_INFO)
 995                printk( "%s(%d):%s write() returning=%d\n",
 996                        __FILE__,__LINE__,info->device_name,ret);
 997        return ret;
 998}
 999
1000/* Add a character to the transmit buffer.
1001 */
1002static int put_char(struct tty_struct *tty, unsigned char ch)
1003{
1004        SLMP_INFO *info = tty->driver_data;
1005        unsigned long flags;
1006        int ret = 0;
1007
1008        if ( debug_level >= DEBUG_LEVEL_INFO ) {
1009                printk( "%s(%d):%s put_char(%d)\n",
1010                        __FILE__,__LINE__,info->device_name,ch);
1011        }
1012
1013        if (sanity_check(info, tty->name, "put_char"))
1014                return 0;
1015
1016        if (!info->tx_buf)
1017                return 0;
1018
1019        spin_lock_irqsave(&info->lock,flags);
1020
1021        if ( (info->params.mode != MGSL_MODE_HDLC) ||
1022             !info->tx_active ) {
1023
1024                if (info->tx_count < info->max_frame_size - 1) {
1025                        info->tx_buf[info->tx_put++] = ch;
1026                        if (info->tx_put >= info->max_frame_size)
1027                                info->tx_put -= info->max_frame_size;
1028                        info->tx_count++;
1029                        ret = 1;
1030                }
1031        }
1032
1033        spin_unlock_irqrestore(&info->lock,flags);
1034        return ret;
1035}
1036
1037/* Send a high-priority XON/XOFF character
1038 */
1039static void send_xchar(struct tty_struct *tty, char ch)
1040{
1041        SLMP_INFO *info = tty->driver_data;
1042        unsigned long flags;
1043
1044        if (debug_level >= DEBUG_LEVEL_INFO)
1045                printk("%s(%d):%s send_xchar(%d)\n",
1046                         __FILE__,__LINE__, info->device_name, ch );
1047
1048        if (sanity_check(info, tty->name, "send_xchar"))
1049                return;
1050
1051        info->x_char = ch;
1052        if (ch) {
1053                /* Make sure transmit interrupts are on */
1054                spin_lock_irqsave(&info->lock,flags);
1055                if (!info->tx_enabled)
1056                        tx_start(info);
1057                spin_unlock_irqrestore(&info->lock,flags);
1058        }
1059}
1060
1061/* Wait until the transmitter is empty.
1062 */
1063static void wait_until_sent(struct tty_struct *tty, int timeout)
1064{
1065        SLMP_INFO * info = tty->driver_data;
1066        unsigned long orig_jiffies, char_time;
1067
1068        if (!info )
1069                return;
1070
1071        if (debug_level >= DEBUG_LEVEL_INFO)
1072                printk("%s(%d):%s wait_until_sent() entry\n",
1073                         __FILE__,__LINE__, info->device_name );
1074
1075        if (sanity_check(info, tty->name, "wait_until_sent"))
1076                return;
1077
1078        if (!test_bit(ASYNCB_INITIALIZED, &info->port.flags))
1079                goto exit;
1080
1081        orig_jiffies = jiffies;
1082
1083        /* Set check interval to 1/5 of estimated time to
1084         * send a character, and make it at least 1. The check
1085         * interval should also be less than the timeout.
1086         * Note: use tight timings here to satisfy the NIST-PCTS.
1087         */
1088
1089        if ( info->params.data_rate ) {
1090                char_time = info->timeout/(32 * 5);
1091                if (!char_time)
1092                        char_time++;
1093        } else
1094                char_time = 1;
1095
1096        if (timeout)
1097                char_time = min_t(unsigned long, char_time, timeout);
1098
1099        if ( info->params.mode == MGSL_MODE_HDLC ) {
1100                while (info->tx_active) {
1101                        msleep_interruptible(jiffies_to_msecs(char_time));
1102                        if (signal_pending(current))
1103                                break;
1104                        if (timeout && time_after(jiffies, orig_jiffies + timeout))
1105                                break;
1106                }
1107        } else {
1108                /*
1109                 * TODO: determine if there is something similar to USC16C32
1110                 *       TXSTATUS_ALL_SENT status
1111                 */
1112                while ( info->tx_active && info->tx_enabled) {
1113                        msleep_interruptible(jiffies_to_msecs(char_time));
1114                        if (signal_pending(current))
1115                                break;
1116                        if (timeout && time_after(jiffies, orig_jiffies + timeout))
1117                                break;
1118                }
1119        }
1120
1121exit:
1122        if (debug_level >= DEBUG_LEVEL_INFO)
1123                printk("%s(%d):%s wait_until_sent() exit\n",
1124                         __FILE__,__LINE__, info->device_name );
1125}
1126
1127/* Return the count of free bytes in transmit buffer
1128 */
1129static int write_room(struct tty_struct *tty)
1130{
1131        SLMP_INFO *info = tty->driver_data;
1132        int ret;
1133
1134        if (sanity_check(info, tty->name, "write_room"))
1135                return 0;
1136
1137        if (info->params.mode == MGSL_MODE_HDLC) {
1138                ret = (info->tx_active) ? 0 : HDLC_MAX_FRAME_SIZE;
1139        } else {
1140                ret = info->max_frame_size - info->tx_count - 1;
1141                if (ret < 0)
1142                        ret = 0;
1143        }
1144
1145        if (debug_level >= DEBUG_LEVEL_INFO)
1146                printk("%s(%d):%s write_room()=%d\n",
1147                       __FILE__, __LINE__, info->device_name, ret);
1148
1149        return ret;
1150}
1151
1152/* enable transmitter and send remaining buffered characters
1153 */
1154static void flush_chars(struct tty_struct *tty)
1155{
1156        SLMP_INFO *info = tty->driver_data;
1157        unsigned long flags;
1158
1159        if ( debug_level >= DEBUG_LEVEL_INFO )
1160                printk( "%s(%d):%s flush_chars() entry tx_count=%d\n",
1161                        __FILE__,__LINE__,info->device_name,info->tx_count);
1162
1163        if (sanity_check(info, tty->name, "flush_chars"))
1164                return;
1165
1166        if (info->tx_count <= 0 || tty->stopped || tty->hw_stopped ||
1167            !info->tx_buf)
1168                return;
1169
1170        if ( debug_level >= DEBUG_LEVEL_INFO )
1171                printk( "%s(%d):%s flush_chars() entry, starting transmitter\n",
1172                        __FILE__,__LINE__,info->device_name );
1173
1174        spin_lock_irqsave(&info->lock,flags);
1175
1176        if (!info->tx_active) {
1177                if ( (info->params.mode == MGSL_MODE_HDLC) &&
1178                        info->tx_count ) {
1179                        /* operating in synchronous (frame oriented) mode */
1180                        /* copy data from circular tx_buf to */
1181                        /* transmit DMA buffer. */
1182                        tx_load_dma_buffer(info,
1183                                 info->tx_buf,info->tx_count);
1184                }
1185                tx_start(info);
1186        }
1187
1188        spin_unlock_irqrestore(&info->lock,flags);
1189}
1190
1191/* Discard all data in the send buffer
1192 */
1193static void flush_buffer(struct tty_struct *tty)
1194{
1195        SLMP_INFO *info = tty->driver_data;
1196        unsigned long flags;
1197
1198        if (debug_level >= DEBUG_LEVEL_INFO)
1199                printk("%s(%d):%s flush_buffer() entry\n",
1200                         __FILE__,__LINE__, info->device_name );
1201
1202        if (sanity_check(info, tty->name, "flush_buffer"))
1203                return;
1204
1205        spin_lock_irqsave(&info->lock,flags);
1206        info->tx_count = info->tx_put = info->tx_get = 0;
1207        del_timer(&info->tx_timer);
1208        spin_unlock_irqrestore(&info->lock,flags);
1209
1210        tty_wakeup(tty);
1211}
1212
1213/* throttle (stop) transmitter
1214 */
1215static void tx_hold(struct tty_struct *tty)
1216{
1217        SLMP_INFO *info = tty->driver_data;
1218        unsigned long flags;
1219
1220        if (sanity_check(info, tty->name, "tx_hold"))
1221                return;
1222
1223        if ( debug_level >= DEBUG_LEVEL_INFO )
1224                printk("%s(%d):%s tx_hold()\n",
1225                        __FILE__,__LINE__,info->device_name);
1226
1227        spin_lock_irqsave(&info->lock,flags);
1228        if (info->tx_enabled)
1229                tx_stop(info);
1230        spin_unlock_irqrestore(&info->lock,flags);
1231}
1232
1233/* release (start) transmitter
1234 */
1235static void tx_release(struct tty_struct *tty)
1236{
1237        SLMP_INFO *info = tty->driver_data;
1238        unsigned long flags;
1239
1240        if (sanity_check(info, tty->name, "tx_release"))
1241                return;
1242
1243        if ( debug_level >= DEBUG_LEVEL_INFO )
1244                printk("%s(%d):%s tx_release()\n",
1245                        __FILE__,__LINE__,info->device_name);
1246
1247        spin_lock_irqsave(&info->lock,flags);
1248        if (!info->tx_enabled)
1249                tx_start(info);
1250        spin_unlock_irqrestore(&info->lock,flags);
1251}
1252
1253/* Service an IOCTL request
1254 *
1255 * Arguments:
1256 *
1257 *      tty     pointer to tty instance data
1258 *      cmd     IOCTL command code
1259 *      arg     command argument/context
1260 *
1261 * Return Value:        0 if success, otherwise error code
1262 */
1263static int ioctl(struct tty_struct *tty,
1264                 unsigned int cmd, unsigned long arg)
1265{
1266        SLMP_INFO *info = tty->driver_data;
1267        void __user *argp = (void __user *)arg;
1268
1269        if (debug_level >= DEBUG_LEVEL_INFO)
1270                printk("%s(%d):%s ioctl() cmd=%08X\n", __FILE__,__LINE__,
1271                        info->device_name, cmd );
1272
1273        if (sanity_check(info, tty->name, "ioctl"))
1274                return -ENODEV;
1275
1276        if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
1277            (cmd != TIOCMIWAIT)) {
1278                if (tty->flags & (1 << TTY_IO_ERROR))
1279                    return -EIO;
1280        }
1281
1282        switch (cmd) {
1283        case MGSL_IOCGPARAMS:
1284                return get_params(info, argp);
1285        case MGSL_IOCSPARAMS:
1286                return set_params(info, argp);
1287        case MGSL_IOCGTXIDLE:
1288                return get_txidle(info, argp);
1289        case MGSL_IOCSTXIDLE:
1290                return set_txidle(info, (int)arg);
1291        case MGSL_IOCTXENABLE:
1292                return tx_enable(info, (int)arg);
1293        case MGSL_IOCRXENABLE:
1294                return rx_enable(info, (int)arg);
1295        case MGSL_IOCTXABORT:
1296                return tx_abort(info);
1297        case MGSL_IOCGSTATS:
1298                return get_stats(info, argp);
1299        case MGSL_IOCWAITEVENT:
1300                return wait_mgsl_event(info, argp);
1301        case MGSL_IOCLOOPTXDONE:
1302                return 0; // TODO: Not supported, need to document
1303                /* Wait for modem input (DCD,RI,DSR,CTS) change
1304                 * as specified by mask in arg (TIOCM_RNG/DSR/CD/CTS)
1305                 */
1306        case TIOCMIWAIT:
1307                return modem_input_wait(info,(int)arg);
1308                
1309                /*
1310                 * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
1311                 * Return: write counters to the user passed counter struct
1312                 * NB: both 1->0 and 0->1 transitions are counted except for
1313                 *     RI where only 0->1 is counted.
1314                 */
1315        default:
1316                return -ENOIOCTLCMD;
1317        }
1318        return 0;
1319}
1320
1321static int get_icount(struct tty_struct *tty,
1322                                struct serial_icounter_struct *icount)
1323{
1324        SLMP_INFO *info = tty->driver_data;
1325        struct mgsl_icount cnow;        /* kernel counter temps */
1326        unsigned long flags;
1327
1328        spin_lock_irqsave(&info->lock,flags);
1329        cnow = info->icount;
1330        spin_unlock_irqrestore(&info->lock,flags);
1331
1332        icount->cts = cnow.cts;
1333        icount->dsr = cnow.dsr;
1334        icount->rng = cnow.rng;
1335        icount->dcd = cnow.dcd;
1336        icount->rx = cnow.rx;
1337        icount->tx = cnow.tx;
1338        icount->frame = cnow.frame;
1339        icount->overrun = cnow.overrun;
1340        icount->parity = cnow.parity;
1341        icount->brk = cnow.brk;
1342        icount->buf_overrun = cnow.buf_overrun;
1343
1344        return 0;
1345}
1346
1347/*
1348 * /proc fs routines....
1349 */
1350
1351static inline void line_info(struct seq_file *m, SLMP_INFO *info)
1352{
1353        char    stat_buf[30];
1354        unsigned long flags;
1355
1356        seq_printf(m, "%s: SCABase=%08x Mem=%08X StatusControl=%08x LCR=%08X\n"
1357                       "\tIRQ=%d MaxFrameSize=%u\n",
1358                info->device_name,
1359                info->phys_sca_base,
1360                info->phys_memory_base,
1361                info->phys_statctrl_base,
1362                info->phys_lcr_base,
1363                info->irq_level,
1364                info->max_frame_size );
1365
1366        /* output current serial signal states */
1367        spin_lock_irqsave(&info->lock,flags);
1368        get_signals(info);
1369        spin_unlock_irqrestore(&info->lock,flags);
1370
1371        stat_buf[0] = 0;
1372        stat_buf[1] = 0;
1373        if (info->serial_signals & SerialSignal_RTS)
1374                strcat(stat_buf, "|RTS");
1375        if (info->serial_signals & SerialSignal_CTS)
1376                strcat(stat_buf, "|CTS");
1377        if (info->serial_signals & SerialSignal_DTR)
1378                strcat(stat_buf, "|DTR");
1379        if (info->serial_signals & SerialSignal_DSR)
1380                strcat(stat_buf, "|DSR");
1381        if (info->serial_signals & SerialSignal_DCD)
1382                strcat(stat_buf, "|CD");
1383        if (info->serial_signals & SerialSignal_RI)
1384                strcat(stat_buf, "|RI");
1385
1386        if (info->params.mode == MGSL_MODE_HDLC) {
1387                seq_printf(m, "\tHDLC txok:%d rxok:%d",
1388                              info->icount.txok, info->icount.rxok);
1389                if (info->icount.txunder)
1390                        seq_printf(m, " txunder:%d", info->icount.txunder);
1391                if (info->icount.txabort)
1392                        seq_printf(m, " txabort:%d", info->icount.txabort);
1393                if (info->icount.rxshort)
1394                        seq_printf(m, " rxshort:%d", info->icount.rxshort);
1395                if (info->icount.rxlong)
1396                        seq_printf(m, " rxlong:%d", info->icount.rxlong);
1397                if (info->icount.rxover)
1398                        seq_printf(m, " rxover:%d", info->icount.rxover);
1399                if (info->icount.rxcrc)
1400                        seq_printf(m, " rxlong:%d", info->icount.rxcrc);
1401        } else {
1402                seq_printf(m, "\tASYNC tx:%d rx:%d",
1403                              info->icount.tx, info->icount.rx);
1404                if (info->icount.frame)
1405                        seq_printf(m, " fe:%d", info->icount.frame);
1406                if (info->icount.parity)
1407                        seq_printf(m, " pe:%d", info->icount.parity);
1408                if (info->icount.brk)
1409                        seq_printf(m, " brk:%d", info->icount.brk);
1410                if (info->icount.overrun)
1411                        seq_printf(m, " oe:%d", info->icount.overrun);
1412        }
1413
1414        /* Append serial signal status to end */
1415        seq_printf(m, " %s\n", stat_buf+1);
1416
1417        seq_printf(m, "\ttxactive=%d bh_req=%d bh_run=%d pending_bh=%x\n",
1418         info->tx_active,info->bh_requested,info->bh_running,
1419         info->pending_bh);
1420}
1421
1422/* Called to print information about devices
1423 */
1424static int synclinkmp_proc_show(struct seq_file *m, void *v)
1425{
1426        SLMP_INFO *info;
1427
1428        seq_printf(m, "synclinkmp driver:%s\n", driver_version);
1429
1430        info = synclinkmp_device_list;
1431        while( info ) {
1432                line_info(m, info);
1433                info = info->next_device;
1434        }
1435        return 0;
1436}
1437
1438static int synclinkmp_proc_open(struct inode *inode, struct file *file)
1439{
1440        return single_open(file, synclinkmp_proc_show, NULL);
1441}
1442
1443static const struct file_operations synclinkmp_proc_fops = {
1444        .owner          = THIS_MODULE,
1445        .open           = synclinkmp_proc_open,
1446        .read           = seq_read,
1447        .llseek         = seq_lseek,
1448        .release        = single_release,
1449};
1450
1451/* Return the count of bytes in transmit buffer
1452 */
1453static int chars_in_buffer(struct tty_struct *tty)
1454{
1455        SLMP_INFO *info = tty->driver_data;
1456
1457        if (sanity_check(info, tty->name, "chars_in_buffer"))
1458                return 0;
1459
1460        if (debug_level >= DEBUG_LEVEL_INFO)
1461                printk("%s(%d):%s chars_in_buffer()=%d\n",
1462                       __FILE__, __LINE__, info->device_name, info->tx_count);
1463
1464        return info->tx_count;
1465}
1466
1467/* Signal remote device to throttle send data (our receive data)
1468 */
1469static void throttle(struct tty_struct * tty)
1470{
1471        SLMP_INFO *info = tty->driver_data;
1472        unsigned long flags;
1473
1474        if (debug_level >= DEBUG_LEVEL_INFO)
1475                printk("%s(%d):%s throttle() entry\n",
1476                         __FILE__,__LINE__, info->device_name );
1477
1478        if (sanity_check(info, tty->name, "throttle"))
1479                return;
1480
1481        if (I_IXOFF(tty))
1482                send_xchar(tty, STOP_CHAR(tty));
1483
1484        if (tty->termios.c_cflag & CRTSCTS) {
1485                spin_lock_irqsave(&info->lock,flags);
1486                info->serial_signals &= ~SerialSignal_RTS;
1487                set_signals(info);
1488                spin_unlock_irqrestore(&info->lock,flags);
1489        }
1490}
1491
1492/* Signal remote device to stop throttling send data (our receive data)
1493 */
1494static void unthrottle(struct tty_struct * tty)
1495{
1496        SLMP_INFO *info = tty->driver_data;
1497        unsigned long flags;
1498
1499        if (debug_level >= DEBUG_LEVEL_INFO)
1500                printk("%s(%d):%s unthrottle() entry\n",
1501                         __FILE__,__LINE__, info->device_name );
1502
1503        if (sanity_check(info, tty->name, "unthrottle"))
1504                return;
1505
1506        if (I_IXOFF(tty)) {
1507                if (info->x_char)
1508                        info->x_char = 0;
1509                else
1510                        send_xchar(tty, START_CHAR(tty));
1511        }
1512
1513        if (tty->termios.c_cflag & CRTSCTS) {
1514                spin_lock_irqsave(&info->lock,flags);
1515                info->serial_signals |= SerialSignal_RTS;
1516                set_signals(info);
1517                spin_unlock_irqrestore(&info->lock,flags);
1518        }
1519}
1520
1521/* set or clear transmit break condition
1522 * break_state  -1=set break condition, 0=clear
1523 */
1524static int set_break(struct tty_struct *tty, int break_state)
1525{
1526        unsigned char RegValue;
1527        SLMP_INFO * info = tty->driver_data;
1528        unsigned long flags;
1529
1530        if (debug_level >= DEBUG_LEVEL_INFO)
1531                printk("%s(%d):%s set_break(%d)\n",
1532                         __FILE__,__LINE__, info->device_name, break_state);
1533
1534        if (sanity_check(info, tty->name, "set_break"))
1535                return -EINVAL;
1536
1537        spin_lock_irqsave(&info->lock,flags);
1538        RegValue = read_reg(info, CTL);
1539        if (break_state == -1)
1540                RegValue |= BIT3;
1541        else
1542                RegValue &= ~BIT3;
1543        write_reg(info, CTL, RegValue);
1544        spin_unlock_irqrestore(&info->lock,flags);
1545        return 0;
1546}
1547
1548#if SYNCLINK_GENERIC_HDLC
1549
1550/**
1551 * called by generic HDLC layer when protocol selected (PPP, frame relay, etc.)
1552 * set encoding and frame check sequence (FCS) options
1553 *
1554 * dev       pointer to network device structure
1555 * encoding  serial encoding setting
1556 * parity    FCS setting
1557 *
1558 * returns 0 if success, otherwise error code
1559 */
1560static int hdlcdev_attach(struct net_device *dev, unsigned short encoding,
1561                          unsigned short parity)
1562{
1563        SLMP_INFO *info = dev_to_port(dev);
1564        unsigned char  new_encoding;
1565        unsigned short new_crctype;
1566
1567        /* return error if TTY interface open */
1568        if (info->port.count)
1569                return -EBUSY;
1570
1571        switch (encoding)
1572        {
1573        case ENCODING_NRZ:        new_encoding = HDLC_ENCODING_NRZ; break;
1574        case ENCODING_NRZI:       new_encoding = HDLC_ENCODING_NRZI_SPACE; break;
1575        case ENCODING_FM_MARK:    new_encoding = HDLC_ENCODING_BIPHASE_MARK; break;
1576        case ENCODING_FM_SPACE:   new_encoding = HDLC_ENCODING_BIPHASE_SPACE; break;
1577        case ENCODING_MANCHESTER: new_encoding = HDLC_ENCODING_BIPHASE_LEVEL; break;
1578        default: return -EINVAL;
1579        }
1580
1581        switch (parity)
1582        {
1583        case PARITY_NONE:            new_crctype = HDLC_CRC_NONE; break;
1584        case PARITY_CRC16_PR1_CCITT: new_crctype = HDLC_CRC_16_CCITT; break;
1585        case PARITY_CRC32_PR1_CCITT: new_crctype = HDLC_CRC_32_CCITT; break;
1586        default: return -EINVAL;
1587        }
1588
1589        info->params.encoding = new_encoding;
1590        info->params.crc_type = new_crctype;
1591
1592        /* if network interface up, reprogram hardware */
1593        if (info->netcount)
1594                program_hw(info);
1595
1596        return 0;
1597}
1598
1599/**
1600 * called by generic HDLC layer to send frame
1601 *
1602 * skb  socket buffer containing HDLC frame
1603 * dev  pointer to network device structure
1604 */
1605static netdev_tx_t hdlcdev_xmit(struct sk_buff *skb,
1606                                      struct net_device *dev)
1607{
1608        SLMP_INFO *info = dev_to_port(dev);
1609        unsigned long flags;
1610
1611        if (debug_level >= DEBUG_LEVEL_INFO)
1612                printk(KERN_INFO "%s:hdlc_xmit(%s)\n",__FILE__,dev->name);
1613
1614        /* stop sending until this frame completes */
1615        netif_stop_queue(dev);
1616
1617        /* copy data to device buffers */
1618        info->tx_count = skb->len;
1619        tx_load_dma_buffer(info, skb->data, skb->len);
1620
1621        /* update network statistics */
1622        dev->stats.tx_packets++;
1623        dev->stats.tx_bytes += skb->len;
1624
1625        /* done with socket buffer, so free it */
1626        dev_kfree_skb(skb);
1627
1628        /* save start time for transmit timeout detection */
1629        dev->trans_start = jiffies;
1630
1631        /* start hardware transmitter if necessary */
1632        spin_lock_irqsave(&info->lock,flags);
1633        if (!info->tx_active)
1634                tx_start(info);
1635        spin_unlock_irqrestore(&info->lock,flags);
1636
1637        return NETDEV_TX_OK;
1638}
1639
1640/**
1641 * called by network layer when interface enabled
1642 * claim resources and initialize hardware
1643 *
1644 * dev  pointer to network device structure
1645 *
1646 * returns 0 if success, otherwise error code
1647 */
1648static int hdlcdev_open(struct net_device *dev)
1649{
1650        SLMP_INFO *info = dev_to_port(dev);
1651        int rc;
1652        unsigned long flags;
1653
1654        if (debug_level >= DEBUG_LEVEL_INFO)
1655                printk("%s:hdlcdev_open(%s)\n",__FILE__,dev->name);
1656
1657        /* generic HDLC layer open processing */
1658        if ((rc = hdlc_open(dev)))
1659                return rc;
1660
1661        /* arbitrate between network and tty opens */
1662        spin_lock_irqsave(&info->netlock, flags);
1663        if (info->port.count != 0 || info->netcount != 0) {
1664                printk(KERN_WARNING "%s: hdlc_open returning busy\n", dev->name);
1665                spin_unlock_irqrestore(&info->netlock, flags);
1666                return -EBUSY;
1667        }
1668        info->netcount=1;
1669        spin_unlock_irqrestore(&info->netlock, flags);
1670
1671        /* claim resources and init adapter */
1672        if ((rc = startup(info)) != 0) {
1673                spin_lock_irqsave(&info->netlock, flags);
1674                info->netcount=0;
1675                spin_unlock_irqrestore(&info->netlock, flags);
1676                return rc;
1677        }
1678
1679        /* assert RTS and DTR, apply hardware settings */
1680        info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR;
1681        program_hw(info);
1682
1683        /* enable network layer transmit */
1684        dev->trans_start = jiffies;
1685        netif_start_queue(dev);
1686
1687        /* inform generic HDLC layer of current DCD status */
1688        spin_lock_irqsave(&info->lock, flags);
1689        get_signals(info);
1690        spin_unlock_irqrestore(&info->lock, flags);
1691        if (info->serial_signals & SerialSignal_DCD)
1692                netif_carrier_on(dev);
1693        else
1694                netif_carrier_off(dev);
1695        return 0;
1696}
1697
1698/**
1699 * called by network layer when interface is disabled
1700 * shutdown hardware and release resources
1701 *
1702 * dev  pointer to network device structure
1703 *
1704 * returns 0 if success, otherwise error code
1705 */
1706static int hdlcdev_close(struct net_device *dev)
1707{
1708        SLMP_INFO *info = dev_to_port(dev);
1709        unsigned long flags;
1710
1711        if (debug_level >= DEBUG_LEVEL_INFO)
1712                printk("%s:hdlcdev_close(%s)\n",__FILE__,dev->name);
1713
1714        netif_stop_queue(dev);
1715
1716        /* shutdown adapter and release resources */
1717        shutdown(info);
1718
1719        hdlc_close(dev);
1720
1721        spin_lock_irqsave(&info->netlock, flags);
1722        info->netcount=0;
1723        spin_unlock_irqrestore(&info->netlock, flags);
1724
1725        return 0;
1726}
1727
1728/**
1729 * called by network layer to process IOCTL call to network device
1730 *
1731 * dev  pointer to network device structure
1732 * ifr  pointer to network interface request structure
1733 * cmd  IOCTL command code
1734 *
1735 * returns 0 if success, otherwise error code
1736 */
1737static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
1738{
1739        const size_t size = sizeof(sync_serial_settings);
1740        sync_serial_settings new_line;
1741        sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync;
1742        SLMP_INFO *info = dev_to_port(dev);
1743        unsigned int flags;
1744
1745        if (debug_level >= DEBUG_LEVEL_INFO)
1746                printk("%s:hdlcdev_ioctl(%s)\n",__FILE__,dev->name);
1747
1748        /* return error if TTY interface open */
1749        if (info->port.count)
1750                return -EBUSY;
1751
1752        if (cmd != SIOCWANDEV)
1753                return hdlc_ioctl(dev, ifr, cmd);
1754
1755        switch(ifr->ifr_settings.type) {
1756        case IF_GET_IFACE: /* return current sync_serial_settings */
1757
1758                ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL;
1759                if (ifr->ifr_settings.size < size) {
1760                        ifr->ifr_settings.size = size; /* data size wanted */
1761                        return -ENOBUFS;
1762                }
1763
1764                flags = info->params.flags & (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
1765                                              HDLC_FLAG_RXC_BRG    | HDLC_FLAG_RXC_TXCPIN |
1766                                              HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
1767                                              HDLC_FLAG_TXC_BRG    | HDLC_FLAG_TXC_RXCPIN);
1768
1769                switch (flags){
1770                case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN): new_line.clock_type = CLOCK_EXT; break;
1771                case (HDLC_FLAG_RXC_BRG    | HDLC_FLAG_TXC_BRG):    new_line.clock_type = CLOCK_INT; break;
1772                case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG):    new_line.clock_type = CLOCK_TXINT; break;
1773                case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN): new_line.clock_type = CLOCK_TXFROMRX; break;
1774                default: new_line.clock_type = CLOCK_DEFAULT;
1775                }
1776
1777                new_line.clock_rate = info->params.clock_speed;
1778                new_line.loopback   = info->params.loopback ? 1:0;
1779
1780                if (copy_to_user(line, &new_line, size))
1781                        return -EFAULT;
1782                return 0;
1783
1784        case IF_IFACE_SYNC_SERIAL: /* set sync_serial_settings */
1785
1786                if(!capable(CAP_NET_ADMIN))
1787                        return -EPERM;
1788                if (copy_from_user(&new_line, line, size))
1789                        return -EFAULT;
1790
1791                switch (new_line.clock_type)
1792                {
1793                case CLOCK_EXT:      flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN; break;
1794                case CLOCK_TXFROMRX: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN; break;
1795                case CLOCK_INT:      flags = HDLC_FLAG_RXC_BRG    | HDLC_FLAG_TXC_BRG;    break;
1796                case CLOCK_TXINT:    flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG;    break;
1797                case CLOCK_DEFAULT:  flags = info->params.flags &
1798                                             (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
1799                                              HDLC_FLAG_RXC_BRG    | HDLC_FLAG_RXC_TXCPIN |
1800                                              HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
1801                                              HDLC_FLAG_TXC_BRG    | HDLC_FLAG_TXC_RXCPIN); break;
1802                default: return -EINVAL;
1803                }
1804
1805                if (new_line.loopback != 0 && new_line.loopback != 1)
1806                        return -EINVAL;
1807
1808                info->params.flags &= ~(HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
1809                                        HDLC_FLAG_RXC_BRG    | HDLC_FLAG_RXC_TXCPIN |
1810                                        HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
1811                                        HDLC_FLAG_TXC_BRG    | HDLC_FLAG_TXC_RXCPIN);
1812                info->params.flags |= flags;
1813
1814                info->params.loopback = new_line.loopback;
1815
1816                if (flags & (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG))
1817                        info->params.clock_speed = new_line.clock_rate;
1818                else
1819                        info->params.clock_speed = 0;
1820
1821                /* if network interface up, reprogram hardware */
1822                if (info->netcount)
1823                        program_hw(info);
1824                return 0;
1825
1826        default:
1827                return hdlc_ioctl(dev, ifr, cmd);
1828        }
1829}
1830
1831/**
1832 * called by network layer when transmit timeout is detected
1833 *
1834 * dev  pointer to network device structure
1835 */
1836static void hdlcdev_tx_timeout(struct net_device *dev)
1837{
1838        SLMP_INFO *info = dev_to_port(dev);
1839        unsigned long flags;
1840
1841        if (debug_level >= DEBUG_LEVEL_INFO)
1842                printk("hdlcdev_tx_timeout(%s)\n",dev->name);
1843
1844        dev->stats.tx_errors++;
1845        dev->stats.tx_aborted_errors++;
1846
1847        spin_lock_irqsave(&info->lock,flags);
1848        tx_stop(info);
1849        spin_unlock_irqrestore(&info->lock,flags);
1850
1851        netif_wake_queue(dev);
1852}
1853
1854/**
1855 * called by device driver when transmit completes
1856 * reenable network layer transmit if stopped
1857 *
1858 * info  pointer to device instance information
1859 */
1860static void hdlcdev_tx_done(SLMP_INFO *info)
1861{
1862        if (netif_queue_stopped(info->netdev))
1863                netif_wake_queue(info->netdev);
1864}
1865
1866/**
1867 * called by device driver when frame received
1868 * pass frame to network layer
1869 *
1870 * info  pointer to device instance information
1871 * buf   pointer to buffer contianing frame data
1872 * size  count of data bytes in buf
1873 */
1874static void hdlcdev_rx(SLMP_INFO *info, char *buf, int size)
1875{
1876        struct sk_buff *skb = dev_alloc_skb(size);
1877        struct net_device *dev = info->netdev;
1878
1879        if (debug_level >= DEBUG_LEVEL_INFO)
1880                printk("hdlcdev_rx(%s)\n",dev->name);
1881
1882        if (skb == NULL) {
1883                printk(KERN_NOTICE "%s: can't alloc skb, dropping packet\n",
1884                       dev->name);
1885                dev->stats.rx_dropped++;
1886                return;
1887        }
1888
1889        memcpy(skb_put(skb, size), buf, size);
1890
1891        skb->protocol = hdlc_type_trans(skb, dev);
1892
1893        dev->stats.rx_packets++;
1894        dev->stats.rx_bytes += size;
1895
1896        netif_rx(skb);
1897}
1898
1899static const struct net_device_ops hdlcdev_ops = {
1900        .ndo_open       = hdlcdev_open,
1901        .ndo_stop       = hdlcdev_close,
1902        .ndo_change_mtu = hdlc_change_mtu,
1903        .ndo_start_xmit = hdlc_start_xmit,
1904        .ndo_do_ioctl   = hdlcdev_ioctl,
1905        .ndo_tx_timeout = hdlcdev_tx_timeout,
1906};
1907
1908/**
1909 * called by device driver when adding device instance
1910 * do generic HDLC initialization
1911 *
1912 * info  pointer to device instance information
1913 *
1914 * returns 0 if success, otherwise error code
1915 */
1916static int hdlcdev_init(SLMP_INFO *info)
1917{
1918        int rc;
1919        struct net_device *dev;
1920        hdlc_device *hdlc;
1921
1922        /* allocate and initialize network and HDLC layer objects */
1923
1924        if (!(dev = alloc_hdlcdev(info))) {
1925                printk(KERN_ERR "%s:hdlc device allocation failure\n",__FILE__);
1926                return -ENOMEM;
1927        }
1928
1929        /* for network layer reporting purposes only */
1930        dev->mem_start = info->phys_sca_base;
1931        dev->mem_end   = info->phys_sca_base + SCA_BASE_SIZE - 1;
1932        dev->irq       = info->irq_level;
1933
1934        /* network layer callbacks and settings */
1935        dev->netdev_ops     = &hdlcdev_ops;
1936        dev->watchdog_timeo = 10 * HZ;
1937        dev->tx_queue_len   = 50;
1938
1939        /* generic HDLC layer callbacks and settings */
1940        hdlc         = dev_to_hdlc(dev);
1941        hdlc->attach = hdlcdev_attach;
1942        hdlc->xmit   = hdlcdev_xmit;
1943
1944        /* register objects with HDLC layer */
1945        if ((rc = register_hdlc_device(dev))) {
1946                printk(KERN_WARNING "%s:unable to register hdlc device\n",__FILE__);
1947                free_netdev(dev);
1948                return rc;
1949        }
1950
1951        info->netdev = dev;
1952        return 0;
1953}
1954
1955/**
1956 * called by device driver when removing device instance
1957 * do generic HDLC cleanup
1958 *
1959 * info  pointer to device instance information
1960 */
1961static void hdlcdev_exit(SLMP_INFO *info)
1962{
1963        unregister_hdlc_device(info->netdev);
1964        free_netdev(info->netdev);
1965        info->netdev = NULL;
1966}
1967
1968#endif /* CONFIG_HDLC */
1969
1970
1971/* Return next bottom half action to perform.
1972 * Return Value:        BH action code or 0 if nothing to do.
1973 */
1974static int bh_action(SLMP_INFO *info)
1975{
1976        unsigned long flags;
1977        int rc = 0;
1978
1979        spin_lock_irqsave(&info->lock,flags);
1980
1981        if (info->pending_bh & BH_RECEIVE) {
1982                info->pending_bh &= ~BH_RECEIVE;
1983                rc = BH_RECEIVE;
1984        } else if (info->pending_bh & BH_TRANSMIT) {
1985                info->pending_bh &= ~BH_TRANSMIT;
1986                rc = BH_TRANSMIT;
1987        } else if (info->pending_bh & BH_STATUS) {
1988                info->pending_bh &= ~BH_STATUS;
1989                rc = BH_STATUS;
1990        }
1991
1992        if (!rc) {
1993                /* Mark BH routine as complete */
1994                info->bh_running = false;
1995                info->bh_requested = false;
1996        }
1997
1998        spin_unlock_irqrestore(&info->lock,flags);
1999
2000        return rc;
2001}
2002
2003/* Perform bottom half processing of work items queued by ISR.
2004 */
2005static void bh_handler(struct work_struct *work)
2006{
2007        SLMP_INFO *info = container_of(work, SLMP_INFO, task);
2008        int action;
2009
2010        if ( debug_level >= DEBUG_LEVEL_BH )
2011                printk( "%s(%d):%s bh_handler() entry\n",
2012                        __FILE__,__LINE__,info->device_name);
2013
2014        info->bh_running = true;
2015
2016        while((action = bh_action(info)) != 0) {
2017
2018                /* Process work item */
2019                if ( debug_level >= DEBUG_LEVEL_BH )
2020                        printk( "%s(%d):%s bh_handler() work item action=%d\n",
2021                                __FILE__,__LINE__,info->device_name, action);
2022
2023                switch (action) {
2024
2025                case BH_RECEIVE:
2026                        bh_receive(info);
2027                        break;
2028                case BH_TRANSMIT:
2029                        bh_transmit(info);
2030                        break;
2031                case BH_STATUS:
2032                        bh_status(info);
2033                        break;
2034                default:
2035                        /* unknown work item ID */
2036                        printk("%s(%d):%s Unknown work item ID=%08X!\n",
2037                                __FILE__,__LINE__,info->device_name,action);
2038                        break;
2039                }
2040        }
2041
2042        if ( debug_level >= DEBUG_LEVEL_BH )
2043                printk( "%s(%d):%s bh_handler() exit\n",
2044                        __FILE__,__LINE__,info->device_name);
2045}
2046
2047static void bh_receive(SLMP_INFO *info)
2048{
2049        if ( debug_level >= DEBUG_LEVEL_BH )
2050                printk( "%s(%d):%s bh_receive()\n",
2051                        __FILE__,__LINE__,info->device_name);
2052
2053        while( rx_get_frame(info) );
2054}
2055
2056static void bh_transmit(SLMP_INFO *info)
2057{
2058        struct tty_struct *tty = info->port.tty;
2059
2060        if ( debug_level >= DEBUG_LEVEL_BH )
2061                printk( "%s(%d):%s bh_transmit() entry\n",
2062                        __FILE__,__LINE__,info->device_name);
2063
2064        if (tty)
2065                tty_wakeup(tty);
2066}
2067
2068static void bh_status(SLMP_INFO *info)
2069{
2070        if ( debug_level >= DEBUG_LEVEL_BH )
2071                printk( "%s(%d):%s bh_status() entry\n",
2072                        __FILE__,__LINE__,info->device_name);
2073
2074        info->ri_chkcount = 0;
2075        info->dsr_chkcount = 0;
2076        info->dcd_chkcount = 0;
2077        info->cts_chkcount = 0;
2078}
2079
2080static void isr_timer(SLMP_INFO * info)
2081{
2082        unsigned char timer = (info->port_num & 1) ? TIMER2 : TIMER0;
2083
2084        /* IER2<7..4> = timer<3..0> interrupt enables (0=disabled) */
2085        write_reg(info, IER2, 0);
2086
2087        /* TMCS, Timer Control/Status Register
2088         *
2089         * 07      CMF, Compare match flag (read only) 1=match
2090         * 06      ECMI, CMF Interrupt Enable: 0=disabled
2091         * 05      Reserved, must be 0
2092         * 04      TME, Timer Enable
2093         * 03..00  Reserved, must be 0
2094         *
2095         * 0000 0000
2096         */
2097        write_reg(info, (unsigned char)(timer + TMCS), 0);
2098
2099        info->irq_occurred = true;
2100
2101        if ( debug_level >= DEBUG_LEVEL_ISR )
2102                printk("%s(%d):%s isr_timer()\n",
2103                        __FILE__,__LINE__,info->device_name);
2104}
2105
2106static void isr_rxint(SLMP_INFO * info)
2107{
2108        struct tty_struct *tty = info->port.tty;
2109        struct  mgsl_icount *icount = &info->icount;
2110        unsigned char status = read_reg(info, SR1) & info->ie1_value & (FLGD + IDLD + CDCD + BRKD);
2111        unsigned char status2 = read_reg(info, SR2) & info->ie2_value & OVRN;
2112
2113        /* clear status bits */
2114        if (status)
2115                write_reg(info, SR1, status);
2116
2117        if (status2)
2118                write_reg(info, SR2, status2);
2119        
2120        if ( debug_level >= DEBUG_LEVEL_ISR )
2121                printk("%s(%d):%s isr_rxint status=%02X %02x\n",
2122                        __FILE__,__LINE__,info->device_name,status,status2);
2123
2124        if (info->params.mode == MGSL_MODE_ASYNC) {
2125                if (status & BRKD) {
2126                        icount->brk++;
2127
2128                        /* process break detection if tty control
2129                         * is not set to ignore it
2130                         */
2131                        if (!(status & info->ignore_status_mask1)) {
2132                                if (info->read_status_mask1 & BRKD) {
2133                                        tty_insert_flip_char(&info->port, 0, TTY_BREAK);
2134                                        if (tty && (info->port.flags & ASYNC_SAK))
2135                                                do_SAK(tty);
2136                                }
2137                        }
2138                }
2139        }
2140        else {
2141                if (status & (FLGD|IDLD)) {
2142                        if (status & FLGD)
2143                                info->icount.exithunt++;
2144                        else if (status & IDLD)
2145                                info->icount.rxidle++;
2146                        wake_up_interruptible(&info->event_wait_q);
2147                }
2148        }
2149
2150        if (status & CDCD) {
2151                /* simulate a common modem status change interrupt
2152                 * for our handler
2153                 */
2154                get_signals( info );
2155                isr_io_pin(info,
2156                        MISCSTATUS_DCD_LATCHED|(info->serial_signals&SerialSignal_DCD));
2157        }
2158}
2159
2160/*
2161 * handle async rx data interrupts
2162 */
2163static void isr_rxrdy(SLMP_INFO * info)
2164{
2165        u16 status;
2166        unsigned char DataByte;
2167        struct  mgsl_icount *icount = &info->icount;
2168
2169        if ( debug_level >= DEBUG_LEVEL_ISR )
2170                printk("%s(%d):%s isr_rxrdy\n",
2171                        __FILE__,__LINE__,info->device_name);
2172
2173        while((status = read_reg(info,CST0)) & BIT0)
2174        {
2175                int flag = 0;
2176                bool over = false;
2177                DataByte = read_reg(info,TRB);
2178
2179                icount->rx++;
2180
2181                if ( status & (PE + FRME + OVRN) ) {
2182                        printk("%s(%d):%s rxerr=%04X\n",
2183                                __FILE__,__LINE__,info->device_name,status);
2184
2185                        /* update error statistics */
2186                        if (status & PE)
2187                                icount->parity++;
2188                        else if (status & FRME)
2189                                icount->frame++;
2190                        else if (status & OVRN)
2191                                icount->overrun++;
2192
2193                        /* discard char if tty control flags say so */
2194                        if (status & info->ignore_status_mask2)
2195                                continue;
2196
2197                        status &= info->read_status_mask2;
2198
2199                        if (status & PE)
2200                                flag = TTY_PARITY;
2201                        else if (status & FRME)
2202                                flag = TTY_FRAME;
2203                        if (status & OVRN) {
2204                                /* Overrun is special, since it's
2205                                 * reported immediately, and doesn't
2206                                 * affect the current character
2207                                 */
2208                                over = true;
2209                        }
2210                }       /* end of if (error) */
2211
2212                tty_insert_flip_char(&info->port, DataByte, flag);
2213                if (over)
2214                        tty_insert_flip_char(&info->port, 0, TTY_OVERRUN);
2215        }
2216
2217        if ( debug_level >= DEBUG_LEVEL_ISR ) {
2218                printk("%s(%d):%s rx=%d brk=%d parity=%d frame=%d overrun=%d\n",
2219                        __FILE__,__LINE__,info->device_name,
2220                        icount->rx,icount->brk,icount->parity,
2221                        icount->frame,icount->overrun);
2222        }
2223
2224        tty_flip_buffer_push(&info->port);
2225}
2226
2227static void isr_txeom(SLMP_INFO * info, unsigned char status)
2228{
2229        if ( debug_level >= DEBUG_LEVEL_ISR )
2230                printk("%s(%d):%s isr_txeom status=%02x\n",
2231                        __FILE__,__LINE__,info->device_name,status);
2232
2233        write_reg(info, TXDMA + DIR, 0x00); /* disable Tx DMA IRQs */
2234        write_reg(info, TXDMA + DSR, 0xc0); /* clear IRQs and disable DMA */
2235        write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */
2236
2237        if (status & UDRN) {
2238                write_reg(info, CMD, TXRESET);
2239                write_reg(info, CMD, TXENABLE);
2240        } else
2241                write_reg(info, CMD, TXBUFCLR);
2242
2243        /* disable and clear tx interrupts */
2244        info->ie0_value &= ~TXRDYE;
2245        info->ie1_value &= ~(IDLE + UDRN);
2246        write_reg16(info, IE0, (unsigned short)((info->ie1_value << 8) + info->ie0_value));
2247        write_reg(info, SR1, (unsigned char)(UDRN + IDLE));
2248
2249        if ( info->tx_active ) {
2250                if (info->params.mode != MGSL_MODE_ASYNC) {
2251                        if (status & UDRN)
2252                                info->icount.txunder++;
2253                        else if (status & IDLE)
2254                                info->icount.txok++;
2255                }
2256
2257                info->tx_active = false;
2258                info->tx_count = info->tx_put = info->tx_get = 0;
2259
2260                del_timer(&info->tx_timer);
2261
2262                if (info->params.mode != MGSL_MODE_ASYNC && info->drop_rts_on_tx_done ) {
2263                        info->serial_signals &= ~SerialSignal_RTS;
2264                        info->drop_rts_on_tx_done = false;
2265                        set_signals(info);
2266                }
2267
2268#if SYNCLINK_GENERIC_HDLC
2269                if (info->netcount)
2270                        hdlcdev_tx_done(info);
2271                else
2272#endif
2273                {
2274                        if (info->port.tty && (info->port.tty->stopped || info->port.tty->hw_stopped)) {
2275                                tx_stop(info);
2276                                return;
2277                        }
2278                        info->pending_bh |= BH_TRANSMIT;
2279                }
2280        }
2281}
2282
2283
2284/*
2285 * handle tx status interrupts
2286 */
2287static void isr_txint(SLMP_INFO * info)
2288{
2289        unsigned char status = read_reg(info, SR1) & info->ie1_value & (UDRN + IDLE + CCTS);
2290
2291        /* clear status bits */
2292        write_reg(info, SR1, status);
2293
2294        if ( debug_level >= DEBUG_LEVEL_ISR )
2295                printk("%s(%d):%s isr_txint status=%02x\n",
2296                        __FILE__,__LINE__,info->device_name,status);
2297
2298        if (status & (UDRN + IDLE))
2299                isr_txeom(info, status);
2300
2301        if (status & CCTS) {
2302                /* simulate a common modem status change interrupt
2303                 * for our handler
2304                 */
2305                get_signals( info );
2306                isr_io_pin(info,
2307                        MISCSTATUS_CTS_LATCHED|(info->serial_signals&SerialSignal_CTS));
2308
2309        }
2310}
2311
2312/*
2313 * handle async tx data interrupts
2314 */
2315static void isr_txrdy(SLMP_INFO * info)
2316{
2317        if ( debug_level >= DEBUG_LEVEL_ISR )
2318                printk("%s(%d):%s isr_txrdy() tx_count=%d\n",
2319                        __FILE__,__LINE__,info->device_name,info->tx_count);
2320
2321        if (info->params.mode != MGSL_MODE_ASYNC) {
2322                /* disable TXRDY IRQ, enable IDLE IRQ */
2323                info->ie0_value &= ~TXRDYE;
2324                info->ie1_value |= IDLE;
2325                write_reg16(info, IE0, (unsigned short)((info->ie1_value << 8) + info->ie0_value));
2326                return;
2327        }
2328
2329        if (info->port.tty && (info->port.tty->stopped || info->port.tty->hw_stopped)) {
2330                tx_stop(info);
2331                return;
2332        }
2333
2334        if ( info->tx_count )
2335                tx_load_fifo( info );
2336        else {
2337                info->tx_active = false;
2338                info->ie0_value &= ~TXRDYE;
2339                write_reg(info, IE0, info->ie0_value);
2340        }
2341
2342        if (info->tx_count < WAKEUP_CHARS)
2343                info->pending_bh |= BH_TRANSMIT;
2344}
2345
2346static void isr_rxdmaok(SLMP_INFO * info)
2347{
2348        /* BIT7 = EOT (end of transfer)
2349         * BIT6 = EOM (end of message/frame)
2350         */
2351        unsigned char status = read_reg(info,RXDMA + DSR) & 0xc0;
2352
2353        /* clear IRQ (BIT0 must be 1 to prevent clearing DE bit) */
2354        write_reg(info, RXDMA + DSR, (unsigned char)(status | 1));
2355
2356        if ( debug_level >= DEBUG_LEVEL_ISR )
2357                printk("%s(%d):%s isr_rxdmaok(), status=%02x\n",
2358                        __FILE__,__LINE__,info->device_name,status);
2359
2360        info->pending_bh |= BH_RECEIVE;
2361}
2362
2363static void isr_rxdmaerror(SLMP_INFO * info)
2364{
2365        /* BIT5 = BOF (buffer overflow)
2366         * BIT4 = COF (counter overflow)
2367         */
2368        unsigned char status = read_reg(info,RXDMA + DSR) & 0x30;
2369
2370        /* clear IRQ (BIT0 must be 1 to prevent clearing DE bit) */
2371        write_reg(info, RXDMA + DSR, (unsigned char)(status | 1));
2372
2373        if ( debug_level >= DEBUG_LEVEL_ISR )
2374                printk("%s(%d):%s isr_rxdmaerror(), status=%02x\n",
2375                        __FILE__,__LINE__,info->device_name,status);
2376
2377        info->rx_overflow = true;
2378        info->pending_bh |= BH_RECEIVE;
2379}
2380
2381static void isr_txdmaok(SLMP_INFO * info)
2382{
2383        unsigned char status_reg1 = read_reg(info, SR1);
2384
2385        write_reg(info, TXDMA + DIR, 0x00);     /* disable Tx DMA IRQs */
2386        write_reg(info, TXDMA + DSR, 0xc0); /* clear IRQs and disable DMA */
2387        write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */
2388
2389        if ( debug_level >= DEBUG_LEVEL_ISR )
2390                printk("%s(%d):%s isr_txdmaok(), status=%02x\n",
2391                        __FILE__,__LINE__,info->device_name,status_reg1);
2392
2393        /* program TXRDY as FIFO empty flag, enable TXRDY IRQ */
2394        write_reg16(info, TRC0, 0);
2395        info->ie0_value |= TXRDYE;
2396        write_reg(info, IE0, info->ie0_value);
2397}
2398
2399static void isr_txdmaerror(SLMP_INFO * info)
2400{
2401        /* BIT5 = BOF (buffer overflow)
2402         * BIT4 = COF (counter overflow)
2403         */
2404        unsigned char status = read_reg(info,TXDMA + DSR) & 0x30;
2405
2406        /* clear IRQ (BIT0 must be 1 to prevent clearing DE bit) */
2407        write_reg(info, TXDMA + DSR, (unsigned char)(status | 1));
2408
2409        if ( debug_level >= DEBUG_LEVEL_ISR )
2410                printk("%s(%d):%s isr_txdmaerror(), status=%02x\n",
2411                        __FILE__,__LINE__,info->device_name,status);
2412}
2413
2414/* handle input serial signal changes
2415 */
2416static void isr_io_pin( SLMP_INFO *info, u16 status )
2417{
2418        struct  mgsl_icount *icount;
2419
2420        if ( debug_level >= DEBUG_LEVEL_ISR )
2421                printk("%s(%d):isr_io_pin status=%04X\n",
2422                        __FILE__,__LINE__,status);
2423
2424        if (status & (MISCSTATUS_CTS_LATCHED | MISCSTATUS_DCD_LATCHED |
2425                      MISCSTATUS_DSR_LATCHED | MISCSTATUS_RI_LATCHED) ) {
2426                icount = &info->icount;
2427                /* update input line counters */
2428                if (status & MISCSTATUS_RI_LATCHED) {
2429                        icount->rng++;
2430                        if ( status & SerialSignal_RI )
2431                                info->input_signal_events.ri_up++;
2432                        else
2433                                info->input_signal_events.ri_down++;
2434                }
2435                if (status & MISCSTATUS_DSR_LATCHED) {
2436                        icount->dsr++;
2437                        if ( status & SerialSignal_DSR )
2438                                info->input_signal_events.dsr_up++;
2439                        else
2440                                info->input_signal_events.dsr_down++;
2441                }
2442                if (status & MISCSTATUS_DCD_LATCHED) {
2443                        if ((info->dcd_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT) {
2444                                info->ie1_value &= ~CDCD;
2445                                write_reg(info, IE1, info->ie1_value);
2446                        }
2447                        icount->dcd++;
2448                        if (status & SerialSignal_DCD) {
2449                                info->input_signal_events.dcd_up++;
2450                        } else
2451                                info->input_signal_events.dcd_down++;
2452#if SYNCLINK_GENERIC_HDLC
2453                        if (info->netcount) {
2454                                if (status & SerialSignal_DCD)
2455                                        netif_carrier_on(info->netdev);
2456                                else
2457                                        netif_carrier_off(info->netdev);
2458                        }
2459#endif
2460                }
2461                if (status & MISCSTATUS_CTS_LATCHED)
2462                {
2463                        if ((info->cts_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT) {
2464                                info->ie1_value &= ~CCTS;
2465                                write_reg(info, IE1, info->ie1_value);
2466                        }
2467                        icount->cts++;
2468                        if ( status & SerialSignal_CTS )
2469                                info->input_signal_events.cts_up++;
2470                        else
2471                                info->input_signal_events.cts_down++;
2472                }
2473                wake_up_interruptible(&info->status_event_wait_q);
2474                wake_up_interruptible(&info->event_wait_q);
2475
2476                if ( (info->port.flags & ASYNC_CHECK_CD) &&
2477                     (status & MISCSTATUS_DCD_LATCHED) ) {
2478                        if ( debug_level >= DEBUG_LEVEL_ISR )
2479                                printk("%s CD now %s...", info->device_name,
2480                                       (status & SerialSignal_DCD) ? "on" : "off");
2481                        if (status & SerialSignal_DCD)
2482                                wake_up_interruptible(&info->port.open_wait);
2483                        else {
2484                                if ( debug_level >= DEBUG_LEVEL_ISR )
2485                                        printk("doing serial hangup...");
2486                                if (info->port.tty)
2487                                        tty_hangup(info->port.tty);
2488                        }
2489                }
2490
2491                if (tty_port_cts_enabled(&info->port) &&
2492                     (status & MISCSTATUS_CTS_LATCHED) ) {
2493                        if ( info->port.tty ) {
2494                                if (info->port.tty->hw_stopped) {
2495                                        if (status & SerialSignal_CTS) {
2496                                                if ( debug_level >= DEBUG_LEVEL_ISR )
2497                                                        printk("CTS tx start...");
2498                                                info->port.tty->hw_stopped = 0;
2499                                                tx_start(info);
2500                                                info->pending_bh |= BH_TRANSMIT;
2501                                                return;
2502                                        }
2503                                } else {
2504                                        if (!(status & SerialSignal_CTS)) {
2505                                                if ( debug_level >= DEBUG_LEVEL_ISR )
2506                                                        printk("CTS tx stop...");
2507                                                info->port.tty->hw_stopped = 1;
2508                                                tx_stop(info);
2509                                        }
2510                                }
2511                        }
2512                }
2513        }
2514
2515        info->pending_bh |= BH_STATUS;
2516}
2517
2518/* Interrupt service routine entry point.
2519 *
2520 * Arguments:
2521 *      irq             interrupt number that caused interrupt
2522 *      dev_id          device ID supplied during interrupt registration
2523 *      regs            interrupted processor context
2524 */
2525static irqreturn_t synclinkmp_interrupt(int dummy, void *dev_id)
2526{
2527        SLMP_INFO *info = dev_id;
2528        unsigned char status, status0, status1=0;
2529        unsigned char dmastatus, dmastatus0, dmastatus1=0;
2530        unsigned char timerstatus0, timerstatus1=0;
2531        unsigned char shift;
2532        unsigned int i;
2533        unsigned short tmp;
2534
2535        if ( debug_level >= DEBUG_LEVEL_ISR )
2536                printk(KERN_DEBUG "%s(%d): synclinkmp_interrupt(%d)entry.\n",
2537                        __FILE__, __LINE__, info->irq_level);
2538
2539        spin_lock(&info->lock);
2540
2541        for(;;) {
2542
2543                /* get status for SCA0 (ports 0-1) */
2544                tmp = read_reg16(info, ISR0);   /* get ISR0 and ISR1 in one read */
2545                status0 = (unsigned char)tmp;
2546                dmastatus0 = (unsigned char)(tmp>>8);
2547                timerstatus0 = read_reg(info, ISR2);
2548
2549                if ( debug_level >= DEBUG_LEVEL_ISR )
2550                        printk(KERN_DEBUG "%s(%d):%s status0=%02x, dmastatus0=%02x, timerstatus0=%02x\n",
2551                                __FILE__, __LINE__, info->device_name,
2552                                status0, dmastatus0, timerstatus0);
2553
2554                if (info->port_count == 4) {
2555                        /* get status for SCA1 (ports 2-3) */
2556                        tmp = read_reg16(info->port_array[2], ISR0);
2557                        status1 = (unsigned char)tmp;
2558                        dmastatus1 = (unsigned char)(tmp>>8);
2559                        timerstatus1 = read_reg(info->port_array[2], ISR2);
2560
2561                        if ( debug_level >= DEBUG_LEVEL_ISR )
2562                                printk("%s(%d):%s status1=%02x, dmastatus1=%02x, timerstatus1=%02x\n",
2563                                        __FILE__,__LINE__,info->device_name,
2564                                        status1,dmastatus1,timerstatus1);
2565                }
2566
2567                if (!status0 && !dmastatus0 && !timerstatus0 &&
2568                         !status1 && !dmastatus1 && !timerstatus1)
2569                        break;
2570
2571                for(i=0; i < info->port_count ; i++) {
2572                        if (info->port_array[i] == NULL)
2573                                continue;
2574                        if (i < 2) {
2575                                status = status0;
2576                                dmastatus = dmastatus0;
2577                        } else {
2578                                status = status1;
2579                                dmastatus = dmastatus1;
2580                        }
2581
2582                        shift = i & 1 ? 4 :0;
2583
2584                        if (status & BIT0 << shift)
2585                                isr_rxrdy(info->port_array[i]);
2586                        if (status & BIT1 << shift)
2587                                isr_txrdy(info->port_array[i]);
2588                        if (status & BIT2 << shift)
2589                                isr_rxint(info->port_array[i]);
2590                        if (status & BIT3 << shift)
2591                                isr_txint(info->port_array[i]);
2592
2593                        if (dmastatus & BIT0 << shift)
2594                                isr_rxdmaerror(info->port_array[i]);
2595                        if (dmastatus & BIT1 << shift)
2596                                isr_rxdmaok(info->port_array[i]);
2597                        if (dmastatus & BIT2 << shift)
2598                                isr_txdmaerror(info->port_array[i]);
2599                        if (dmastatus & BIT3 << shift)
2600                                isr_txdmaok(info->port_array[i]);
2601                }
2602
2603                if (timerstatus0 & (BIT5 | BIT4))
2604                        isr_timer(info->port_array[0]);
2605                if (timerstatus0 & (BIT7 | BIT6))
2606                        isr_timer(info->port_array[1]);
2607                if (timerstatus1 & (BIT5 | BIT4))
2608                        isr_timer(info->port_array[2]);
2609                if (timerstatus1 & (BIT7 | BIT6))
2610                        isr_timer(info->port_array[3]);
2611        }
2612
2613        for(i=0; i < info->port_count ; i++) {
2614                SLMP_INFO * port = info->port_array[i];
2615
2616                /* Request bottom half processing if there's something
2617                 * for it to do and the bh is not already running.
2618                 *
2619                 * Note: startup adapter diags require interrupts.
2620                 * do not request bottom half processing if the
2621                 * device is not open in a normal mode.
2622                 */
2623                if ( port && (port->port.count || port->netcount) &&
2624                     port->pending_bh && !port->bh_running &&
2625                     !port->bh_requested ) {
2626                        if ( debug_level >= DEBUG_LEVEL_ISR )
2627                                printk("%s(%d):%s queueing bh task.\n",
2628                                        __FILE__,__LINE__,port->device_name);
2629                        schedule_work(&port->task);
2630                        port->bh_requested = true;
2631                }
2632        }
2633
2634        spin_unlock(&info->lock);
2635
2636        if ( debug_level >= DEBUG_LEVEL_ISR )
2637                printk(KERN_DEBUG "%s(%d):synclinkmp_interrupt(%d)exit.\n",
2638                        __FILE__, __LINE__, info->irq_level);
2639        return IRQ_HANDLED;
2640}
2641
2642/* Initialize and start device.
2643 */
2644static int startup(SLMP_INFO * info)
2645{
2646        if ( debug_level >= DEBUG_LEVEL_INFO )
2647                printk("%s(%d):%s tx_releaseup()\n",__FILE__,__LINE__,info->device_name);
2648
2649        if (info->port.flags & ASYNC_INITIALIZED)
2650                return 0;
2651
2652        if (!info->tx_buf) {
2653                info->tx_buf = kmalloc(info->max_frame_size, GFP_KERNEL);
2654                if (!info->tx_buf) {
2655                        printk(KERN_ERR"%s(%d):%s can't allocate transmit buffer\n",
2656                                __FILE__,__LINE__,info->device_name);
2657                        return -ENOMEM;
2658                }
2659        }
2660
2661        info->pending_bh = 0;
2662
2663        memset(&info->icount, 0, sizeof(info->icount));
2664
2665        /* program hardware for current parameters */
2666        reset_port(info);
2667
2668        change_params(info);
2669
2670        mod_timer(&info->status_timer, jiffies + msecs_to_jiffies(10));
2671
2672        if (info->port.tty)
2673                clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
2674
2675        info->port.flags |= ASYNC_INITIALIZED;
2676
2677        return 0;
2678}
2679
2680/* Called by close() and hangup() to shutdown hardware
2681 */
2682static void shutdown(SLMP_INFO * info)
2683{
2684        unsigned long flags;
2685
2686        if (!(info->port.flags & ASYNC_INITIALIZED))
2687                return;
2688
2689        if (debug_level >= DEBUG_LEVEL_INFO)
2690                printk("%s(%d):%s synclinkmp_shutdown()\n",
2691                         __FILE__,__LINE__, info->device_name );
2692
2693        /* clear status wait queue because status changes */
2694        /* can't happen after shutting down the hardware */
2695        wake_up_interruptible(&info->status_event_wait_q);
2696        wake_up_interruptible(&info->event_wait_q);
2697
2698        del_timer(&info->tx_timer);
2699        del_timer(&info->status_timer);
2700
2701        kfree(info->tx_buf);
2702        info->tx_buf = NULL;
2703
2704        spin_lock_irqsave(&info->lock,flags);
2705
2706        reset_port(info);
2707
2708        if (!info->port.tty || info->port.tty->termios.c_cflag & HUPCL) {
2709                info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
2710                set_signals(info);
2711        }
2712
2713        spin_unlock_irqrestore(&info->lock,flags);
2714
2715        if (info->port.tty)
2716                set_bit(TTY_IO_ERROR, &info->port.tty->flags);
2717
2718        info->port.flags &= ~ASYNC_INITIALIZED;
2719}
2720
2721static void program_hw(SLMP_INFO *info)
2722{
2723        unsigned long flags;
2724
2725        spin_lock_irqsave(&info->lock,flags);
2726
2727        rx_stop(info);
2728        tx_stop(info);
2729
2730        info->tx_count = info->tx_put = info->tx_get = 0;
2731
2732        if (info->params.mode == MGSL_MODE_HDLC || info->netcount)
2733                hdlc_mode(info);
2734        else
2735                async_mode(info);
2736
2737        set_signals(info);
2738
2739        info->dcd_chkcount = 0;
2740        info->cts_chkcount = 0;
2741        info->ri_chkcount = 0;
2742        info->dsr_chkcount = 0;
2743
2744        info->ie1_value |= (CDCD|CCTS);
2745        write_reg(info, IE1, info->ie1_value);
2746
2747        get_signals(info);
2748
2749        if (info->netcount || (info->port.tty && info->port.tty->termios.c_cflag & CREAD) )
2750                rx_start(info);
2751
2752        spin_unlock_irqrestore(&info->lock,flags);
2753}
2754
2755/* Reconfigure adapter based on new parameters
2756 */
2757static void change_params(SLMP_INFO *info)
2758{
2759        unsigned cflag;
2760        int bits_per_char;
2761
2762        if (!info->port.tty)
2763                return;
2764
2765        if (debug_level >= DEBUG_LEVEL_INFO)
2766                printk("%s(%d):%s change_params()\n",
2767                         __FILE__,__LINE__, info->device_name );
2768
2769        cflag = info->port.tty->termios.c_cflag;
2770
2771        /* if B0 rate (hangup) specified then negate RTS and DTR */
2772        /* otherwise assert RTS and DTR */
2773        if (cflag & CBAUD)
2774                info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR;
2775        else
2776                info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
2777
2778        /* byte size and parity */
2779
2780        switch (cflag & CSIZE) {
2781              case CS5: info->params.data_bits = 5; break;
2782              case CS6: info->params.data_bits = 6; break;
2783              case CS7: info->params.data_bits = 7; break;
2784              case CS8: info->params.data_bits = 8; break;
2785              /* Never happens, but GCC is too dumb to figure it out */
2786              default:  info->params.data_bits = 7; break;
2787              }
2788
2789        if (cflag & CSTOPB)
2790                info->params.stop_bits = 2;
2791        else
2792                info->params.stop_bits = 1;
2793
2794        info->params.parity = ASYNC_PARITY_NONE;
2795        if (cflag & PARENB) {
2796                if (cflag & PARODD)
2797                        info->params.parity = ASYNC_PARITY_ODD;
2798                else
2799                        info->params.parity = ASYNC_PARITY_EVEN;
2800#ifdef CMSPAR
2801                if (cflag & CMSPAR)
2802                        info->params.parity = ASYNC_PARITY_SPACE;
2803#endif
2804        }
2805
2806        /* calculate number of jiffies to transmit a full
2807         * FIFO (32 bytes) at specified data rate
2808         */
2809        bits_per_char = info->params.data_bits +
2810                        info->params.stop_bits + 1;
2811
2812        /* if port data rate is set to 460800 or less then
2813         * allow tty settings to override, otherwise keep the
2814         * current data rate.
2815         */
2816        if (info->params.data_rate <= 460800) {
2817                info->params.data_rate = tty_get_baud_rate(info->port.tty);
2818        }
2819
2820        if ( info->params.data_rate ) {
2821                info->timeout = (32*HZ*bits_per_char) /
2822                                info->params.data_rate;
2823        }
2824        info->timeout += HZ/50;         /* Add .02 seconds of slop */
2825
2826        if (cflag & CRTSCTS)
2827                info->port.flags |= ASYNC_CTS_FLOW;
2828        else
2829                info->port.flags &= ~ASYNC_CTS_FLOW;
2830
2831        if (cflag & CLOCAL)
2832                info->port.flags &= ~ASYNC_CHECK_CD;
2833        else
2834                info->port.flags |= ASYNC_CHECK_CD;
2835
2836        /* process tty input control flags */
2837
2838        info->read_status_mask2 = OVRN;
2839        if (I_INPCK(info->port.tty))
2840                info->read_status_mask2 |= PE | FRME;
2841        if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty))
2842                info->read_status_mask1 |= BRKD;
2843        if (I_IGNPAR(info->port.tty))
2844                info->ignore_status_mask2 |= PE | FRME;
2845        if (I_IGNBRK(info->port.tty)) {
2846                info->ignore_status_mask1 |= BRKD;
2847                /* If ignoring parity and break indicators, ignore
2848                 * overruns too.  (For real raw support).
2849                 */
2850                if (I_IGNPAR(info->port.tty))
2851                        info->ignore_status_mask2 |= OVRN;
2852        }
2853
2854        program_hw(info);
2855}
2856
2857static int get_stats(SLMP_INFO * info, struct mgsl_icount __user *user_icount)
2858{
2859        int err;
2860
2861        if (debug_level >= DEBUG_LEVEL_INFO)
2862                printk("%s(%d):%s get_params()\n",
2863                         __FILE__,__LINE__, info->device_name);
2864
2865        if (!user_icount) {
2866                memset(&info->icount, 0, sizeof(info->icount));
2867        } else {
2868                mutex_lock(&info->port.mutex);
2869                COPY_TO_USER(err, user_icount, &info->icount, sizeof(struct mgsl_icount));
2870                mutex_unlock(&info->port.mutex);
2871                if (err)
2872                        return -EFAULT;
2873        }
2874
2875        return 0;
2876}
2877
2878static int get_params(SLMP_INFO * info, MGSL_PARAMS __user *user_params)
2879{
2880        int err;
2881        if (debug_level >= DEBUG_LEVEL_INFO)
2882                printk("%s(%d):%s get_params()\n",
2883                         __FILE__,__LINE__, info->device_name);
2884
2885        mutex_lock(&info->port.mutex);
2886        COPY_TO_USER(err,user_params, &info->params, sizeof(MGSL_PARAMS));
2887        mutex_unlock(&info->port.mutex);
2888        if (err) {
2889                if ( debug_level >= DEBUG_LEVEL_INFO )
2890                        printk( "%s(%d):%s get_params() user buffer copy failed\n",
2891                                __FILE__,__LINE__,info->device_name);
2892                return -EFAULT;
2893        }
2894
2895        return 0;
2896}
2897
2898static int set_params(SLMP_INFO * info, MGSL_PARAMS __user *new_params)
2899{
2900        unsigned long flags;
2901        MGSL_PARAMS tmp_params;
2902        int err;
2903
2904        if (debug_level >= DEBUG_LEVEL_INFO)
2905                printk("%s(%d):%s set_params\n",
2906                        __FILE__,__LINE__,info->device_name );
2907        COPY_FROM_USER(err,&tmp_params, new_params, sizeof(MGSL_PARAMS));
2908        if (err) {
2909                if ( debug_level >= DEBUG_LEVEL_INFO )
2910                        printk( "%s(%d):%s set_params() user buffer copy failed\n",
2911                                __FILE__,__LINE__,info->device_name);
2912                return -EFAULT;
2913        }
2914
2915        mutex_lock(&info->port.mutex);
2916        spin_lock_irqsave(&info->lock,flags);
2917        memcpy(&info->params,&tmp_params,sizeof(MGSL_PARAMS));
2918        spin_unlock_irqrestore(&info->lock,flags);
2919
2920        change_params(info);
2921        mutex_unlock(&info->port.mutex);
2922
2923        return 0;
2924}
2925
2926static int get_txidle(SLMP_INFO * info, int __user *idle_mode)
2927{
2928        int err;
2929
2930        if (debug_level >= DEBUG_LEVEL_INFO)
2931                printk("%s(%d):%s get_txidle()=%d\n",
2932                         __FILE__,__LINE__, info->device_name, info->idle_mode);
2933
2934        COPY_TO_USER(err,idle_mode, &info->idle_mode, sizeof(int));
2935        if (err) {
2936                if ( debug_level >= DEBUG_LEVEL_INFO )
2937                        printk( "%s(%d):%s get_txidle() user buffer copy failed\n",
2938                                __FILE__,__LINE__,info->device_name);
2939                return -EFAULT;
2940        }
2941
2942        return 0;
2943}
2944
2945static int set_txidle(SLMP_INFO * info, int idle_mode)
2946{
2947        unsigned long flags;
2948
2949        if (debug_level >= DEBUG_LEVEL_INFO)
2950                printk("%s(%d):%s set_txidle(%d)\n",
2951                        __FILE__,__LINE__,info->device_name, idle_mode );
2952
2953        spin_lock_irqsave(&info->lock,flags);
2954        info->idle_mode = idle_mode;
2955        tx_set_idle( info );
2956        spin_unlock_irqrestore(&info->lock,flags);
2957        return 0;
2958}
2959
2960static int tx_enable(SLMP_INFO * info, int enable)
2961{
2962        unsigned long flags;
2963
2964        if (debug_level >= DEBUG_LEVEL_INFO)
2965                printk("%s(%d):%s tx_enable(%d)\n",
2966                        __FILE__,__LINE__,info->device_name, enable);
2967
2968        spin_lock_irqsave(&info->lock,flags);
2969        if ( enable ) {
2970                if ( !info->tx_enabled ) {
2971                        tx_start(info);
2972                }
2973        } else {
2974                if ( info->tx_enabled )
2975                        tx_stop(info);
2976        }
2977        spin_unlock_irqrestore(&info->lock,flags);
2978        return 0;
2979}
2980
2981/* abort send HDLC frame
2982 */
2983static int tx_abort(SLMP_INFO * info)
2984{
2985        unsigned long flags;
2986
2987        if (debug_level >= DEBUG_LEVEL_INFO)
2988                printk("%s(%d):%s tx_abort()\n",
2989                        __FILE__,__LINE__,info->device_name);
2990
2991        spin_lock_irqsave(&info->lock,flags);
2992        if ( info->tx_active && info->params.mode == MGSL_MODE_HDLC ) {
2993                info->ie1_value &= ~UDRN;
2994                info->ie1_value |= IDLE;
2995                write_reg(info, IE1, info->ie1_value);  /* disable tx status interrupts */
2996                write_reg(info, SR1, (unsigned char)(IDLE + UDRN));     /* clear pending */
2997
2998                write_reg(info, TXDMA + DSR, 0);                /* disable DMA channel */
2999                write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */
3000
3001                write_reg(info, CMD, TXABORT);
3002        }
3003        spin_unlock_irqrestore(&info->lock,flags);
3004        return 0;
3005}
3006
3007static int rx_enable(SLMP_INFO * info, int enable)
3008{
3009        unsigned long flags;
3010
3011        if (debug_level >= DEBUG_LEVEL_INFO)
3012                printk("%s(%d):%s rx_enable(%d)\n",
3013                        __FILE__,__LINE__,info->device_name,enable);
3014
3015        spin_lock_irqsave(&info->lock,flags);
3016        if ( enable ) {
3017                if ( !info->rx_enabled )
3018                        rx_start(info);
3019        } else {
3020                if ( info->rx_enabled )
3021                        rx_stop(info);
3022        }
3023        spin_unlock_irqrestore(&info->lock,flags);
3024        return 0;
3025}
3026
3027/* wait for specified event to occur
3028 */
3029static int wait_mgsl_event(SLMP_INFO * info, int __user *mask_ptr)
3030{
3031        unsigned long flags;
3032        int s;
3033        int rc=0;
3034        struct mgsl_icount cprev, cnow;
3035        int events;
3036        int mask;
3037        struct  _input_signal_events oldsigs, newsigs;
3038        DECLARE_WAITQUEUE(wait, current);
3039
3040        COPY_FROM_USER(rc,&mask, mask_ptr, sizeof(int));
3041        if (rc) {
3042                return  -EFAULT;
3043        }
3044
3045        if (debug_level >= DEBUG_LEVEL_INFO)
3046                printk("%s(%d):%s wait_mgsl_event(%d)\n",
3047                        __FILE__,__LINE__,info->device_name,mask);
3048
3049        spin_lock_irqsave(&info->lock,flags);
3050
3051        /* return immediately if state matches requested events */
3052        get_signals(info);
3053        s = info->serial_signals;
3054
3055        events = mask &
3056                ( ((s & SerialSignal_DSR) ? MgslEvent_DsrActive:MgslEvent_DsrInactive) +
3057                  ((s & SerialSignal_DCD) ? MgslEvent_DcdActive:MgslEvent_DcdInactive) +
3058                  ((s & SerialSignal_CTS) ? MgslEvent_CtsActive:MgslEvent_CtsInactive) +
3059                  ((s & SerialSignal_RI)  ? MgslEvent_RiActive :MgslEvent_RiInactive) );
3060        if (events) {
3061                spin_unlock_irqrestore(&info->lock,flags);
3062                goto exit;
3063        }
3064
3065        /* save current irq counts */
3066        cprev = info->icount;
3067        oldsigs = info->input_signal_events;
3068
3069        /* enable hunt and idle irqs if needed */
3070        if (mask & (MgslEvent_ExitHuntMode+MgslEvent_IdleReceived)) {
3071                unsigned char oldval = info->ie1_value;
3072                unsigned char newval = oldval +
3073                         (mask & MgslEvent_ExitHuntMode ? FLGD:0) +
3074                         (mask & MgslEvent_IdleReceived ? IDLD:0);
3075                if ( oldval != newval ) {
3076                        info->ie1_value = newval;
3077                        write_reg(info, IE1, info->ie1_value);
3078                }
3079        }
3080
3081        set_current_state(TASK_INTERRUPTIBLE);
3082        add_wait_queue(&info->event_wait_q, &wait);
3083
3084        spin_unlock_irqrestore(&info->lock,flags);
3085
3086        for(;;) {
3087                schedule();
3088                if (signal_pending(current)) {
3089                        rc = -ERESTARTSYS;
3090                        break;
3091                }
3092
3093                /* get current irq counts */
3094                spin_lock_irqsave(&info->lock,flags);
3095                cnow = info->icount;
3096                newsigs = info->input_signal_events;
3097                set_current_state(TASK_INTERRUPTIBLE);
3098                spin_unlock_irqrestore(&info->lock,flags);
3099
3100                /* if no change, wait aborted for some reason */
3101                if (newsigs.dsr_up   == oldsigs.dsr_up   &&
3102                    newsigs.dsr_down == oldsigs.dsr_down &&
3103                    newsigs.dcd_up   == oldsigs.dcd_up   &&
3104                    newsigs.dcd_down == oldsigs.dcd_down &&
3105                    newsigs.cts_up   == oldsigs.cts_up   &&
3106                    newsigs.cts_down == oldsigs.cts_down &&
3107                    newsigs.ri_up    == oldsigs.ri_up    &&
3108                    newsigs.ri_down  == oldsigs.ri_down  &&
3109                    cnow.exithunt    == cprev.exithunt   &&
3110                    cnow.rxidle      == cprev.rxidle) {
3111                        rc = -EIO;
3112                        break;
3113                }
3114
3115                events = mask &
3116                        ( (newsigs.dsr_up   != oldsigs.dsr_up   ? MgslEvent_DsrActive:0)   +
3117                          (newsigs.dsr_down != oldsigs.dsr_down ? MgslEvent_DsrInactive:0) +
3118                          (newsigs.dcd_up   != oldsigs.dcd_up   ? MgslEvent_DcdActive:0)   +
3119                          (newsigs.dcd_down != oldsigs.dcd_down ? MgslEvent_DcdInactive:0) +
3120                          (newsigs.cts_up   != oldsigs.cts_up   ? MgslEvent_CtsActive:0)   +
3121                          (newsigs.cts_down != oldsigs.cts_down ? MgslEvent_CtsInactive:0) +
3122                          (newsigs.ri_up    != oldsigs.ri_up    ? MgslEvent_RiActive:0)    +
3123                          (newsigs.ri_down  != oldsigs.ri_down  ? MgslEvent_RiInactive:0)  +
3124                          (cnow.exithunt    != cprev.exithunt   ? MgslEvent_ExitHuntMode:0) +
3125                          (cnow.rxidle      != cprev.rxidle     ? MgslEvent_IdleReceived:0) );
3126                if (events)
3127                        break;
3128
3129                cprev = cnow;
3130                oldsigs = newsigs;
3131        }
3132
3133        remove_wait_queue(&info->event_wait_q, &wait);
3134        set_current_state(TASK_RUNNING);
3135
3136
3137        if (mask & (MgslEvent_ExitHuntMode + MgslEvent_IdleReceived)) {
3138                spin_lock_irqsave(&info->lock,flags);
3139                if (!waitqueue_active(&info->event_wait_q)) {
3140                        /* disable enable exit hunt mode/idle rcvd IRQs */
3141                        info->ie1_value &= ~(FLGD|IDLD);
3142                        write_reg(info, IE1, info->ie1_value);
3143                }
3144                spin_unlock_irqrestore(&info->lock,flags);
3145        }
3146exit:
3147        if ( rc == 0 )
3148                PUT_USER(rc, events, mask_ptr);
3149
3150        return rc;
3151}
3152
3153static int modem_input_wait(SLMP_INFO *info,int arg)
3154{
3155        unsigned long flags;
3156        int rc;
3157        struct mgsl_icount cprev, cnow;
3158        DECLARE_WAITQUEUE(wait, current);
3159
3160        /* save current irq counts */
3161        spin_lock_irqsave(&info->lock,flags);
3162        cprev = info->icount;
3163        add_wait_queue(&info->status_event_wait_q, &wait);
3164        set_current_state(TASK_INTERRUPTIBLE);
3165        spin_unlock_irqrestore(&info->lock,flags);
3166
3167        for(;;) {
3168                schedule();
3169                if (signal_pending(current)) {
3170                        rc = -ERESTARTSYS;
3171                        break;
3172                }
3173
3174                /* get new irq counts */
3175                spin_lock_irqsave(&info->lock,flags);
3176                cnow = info->icount;
3177                set_current_state(TASK_INTERRUPTIBLE);
3178                spin_unlock_irqrestore(&info->lock,flags);
3179
3180                /* if no change, wait aborted for some reason */
3181                if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
3182                    cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) {
3183                        rc = -EIO;
3184                        break;
3185                }
3186
3187                /* check for change in caller specified modem input */
3188                if ((arg & TIOCM_RNG && cnow.rng != cprev.rng) ||
3189                    (arg & TIOCM_DSR && cnow.dsr != cprev.dsr) ||
3190                    (arg & TIOCM_CD  && cnow.dcd != cprev.dcd) ||
3191                    (arg & TIOCM_CTS && cnow.cts != cprev.cts)) {
3192                        rc = 0;
3193                        break;
3194                }
3195
3196                cprev = cnow;
3197        }
3198        remove_wait_queue(&info->status_event_wait_q, &wait);
3199        set_current_state(TASK_RUNNING);
3200        return rc;
3201}
3202
3203/* return the state of the serial control and status signals
3204 */
3205static int tiocmget(struct tty_struct *tty)
3206{
3207        SLMP_INFO *info = tty->driver_data;
3208        unsigned int result;
3209        unsigned long flags;
3210
3211        spin_lock_irqsave(&info->lock,flags);
3212        get_signals(info);
3213        spin_unlock_irqrestore(&info->lock,flags);
3214
3215        result = ((info->serial_signals & SerialSignal_RTS) ? TIOCM_RTS : 0) |
3216                 ((info->serial_signals & SerialSignal_DTR) ? TIOCM_DTR : 0) |
3217                 ((info->serial_signals & SerialSignal_DCD) ? TIOCM_CAR : 0) |
3218                 ((info->serial_signals & SerialSignal_RI)  ? TIOCM_RNG : 0) |
3219                 ((info->serial_signals & SerialSignal_DSR) ? TIOCM_DSR : 0) |
3220                 ((info->serial_signals & SerialSignal_CTS) ? TIOCM_CTS : 0);
3221
3222        if (debug_level >= DEBUG_LEVEL_INFO)
3223                printk("%s(%d):%s tiocmget() value=%08X\n",
3224                         __FILE__,__LINE__, info->device_name, result );
3225        return result;
3226}
3227
3228/* set modem control signals (DTR/RTS)
3229 */
3230static int tiocmset(struct tty_struct *tty,
3231                                        unsigned int set, unsigned int clear)
3232{
3233        SLMP_INFO *info = tty->driver_data;
3234        unsigned long flags;
3235
3236        if (debug_level >= DEBUG_LEVEL_INFO)
3237                printk("%s(%d):%s tiocmset(%x,%x)\n",
3238                        __FILE__,__LINE__,info->device_name, set, clear);
3239
3240        if (set & TIOCM_RTS)
3241                info->serial_signals |= SerialSignal_RTS;
3242        if (set & TIOCM_DTR)
3243                info->serial_signals |= SerialSignal_DTR;
3244        if (clear & TIOCM_RTS)
3245                info->serial_signals &= ~SerialSignal_RTS;
3246        if (clear & TIOCM_DTR)
3247                info->serial_signals &= ~SerialSignal_DTR;
3248
3249        spin_lock_irqsave(&info->lock,flags);
3250        set_signals(info);
3251        spin_unlock_irqrestore(&info->lock,flags);
3252
3253        return 0;
3254}
3255
3256static int carrier_raised(struct tty_port *port)
3257{
3258        SLMP_INFO *info = container_of(port, SLMP_INFO, port);
3259        unsigned long flags;
3260
3261        spin_lock_irqsave(&info->lock,flags);
3262        get_signals(info);
3263        spin_unlock_irqrestore(&info->lock,flags);
3264
3265        return (info->serial_signals & SerialSignal_DCD) ? 1 : 0;
3266}
3267
3268static void dtr_rts(struct tty_port *port, int on)
3269{
3270        SLMP_INFO *info = container_of(port, SLMP_INFO, port);
3271        unsigned long flags;
3272
3273        spin_lock_irqsave(&info->lock,flags);
3274        if (on)
3275                info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR;
3276        else
3277                info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
3278        set_signals(info);
3279        spin_unlock_irqrestore(&info->lock,flags);
3280}
3281
3282/* Block the current process until the specified port is ready to open.
3283 */
3284static int block_til_ready(struct tty_struct *tty, struct file *filp,
3285                           SLMP_INFO *info)
3286{
3287        DECLARE_WAITQUEUE(wait, current);
3288        int             retval;
3289        bool            do_clocal = false;
3290        bool            extra_count = false;
3291        unsigned long   flags;
3292        int             cd;
3293        struct tty_port *port = &info->port;
3294
3295        if (debug_level >= DEBUG_LEVEL_INFO)
3296                printk("%s(%d):%s block_til_ready()\n",
3297                         __FILE__,__LINE__, tty->driver->name );
3298
3299        if (filp->f_flags & O_NONBLOCK || tty->flags & (1 << TTY_IO_ERROR)){
3300                /* nonblock mode is set or port is not enabled */
3301                /* just verify that callout device is not active */
3302                port->flags |= ASYNC_NORMAL_ACTIVE;
3303                return 0;
3304        }
3305
3306        if (tty->termios.c_cflag & CLOCAL)
3307                do_clocal = true;
3308
3309        /* Wait for carrier detect and the line to become
3310         * free (i.e., not in use by the callout).  While we are in
3311         * this loop, port->count is dropped by one, so that
3312         * close() knows when to free things.  We restore it upon
3313         * exit, either normal or abnormal.
3314         */
3315
3316        retval = 0;
3317        add_wait_queue(&port->open_wait, &wait);
3318
3319        if (debug_level >= DEBUG_LEVEL_INFO)
3320                printk("%s(%d):%s block_til_ready() before block, count=%d\n",
3321                         __FILE__,__LINE__, tty->driver->name, port->count );
3322
3323        spin_lock_irqsave(&info->lock, flags);
3324        if (!tty_hung_up_p(filp)) {
3325                extra_count = true;
3326                port->count--;
3327        }
3328        spin_unlock_irqrestore(&info->lock, flags);
3329        port->blocked_open++;
3330
3331        while (1) {
3332                if (C_BAUD(tty) && test_bit(ASYNCB_INITIALIZED, &port->flags))
3333                        tty_port_raise_dtr_rts(port);
3334
3335                set_current_state(TASK_INTERRUPTIBLE);
3336
3337                if (tty_hung_up_p(filp) || !(port->flags & ASYNC_INITIALIZED)){
3338                        retval = (port->flags & ASYNC_HUP_NOTIFY) ?
3339                                        -EAGAIN : -ERESTARTSYS;
3340                        break;
3341                }
3342
3343                cd = tty_port_carrier_raised(port);
3344
3345                if (!(port->flags & ASYNC_CLOSING) && (do_clocal || cd))
3346                        break;
3347
3348                if (signal_pending(current)) {
3349                        retval = -ERESTARTSYS;
3350                        break;
3351                }
3352
3353                if (debug_level >= DEBUG_LEVEL_INFO)
3354                        printk("%s(%d):%s block_til_ready() count=%d\n",
3355                                 __FILE__,__LINE__, tty->driver->name, port->count );
3356
3357                tty_unlock(tty);
3358                schedule();
3359                tty_lock(tty);
3360        }
3361
3362        set_current_state(TASK_RUNNING);
3363        remove_wait_queue(&port->open_wait, &wait);
3364
3365        if (extra_count)
3366                port->count++;
3367        port->blocked_open--;
3368
3369        if (debug_level >= DEBUG_LEVEL_INFO)
3370                printk("%s(%d):%s block_til_ready() after, count=%d\n",
3371                         __FILE__,__LINE__, tty->driver->name, port->count );
3372
3373        if (!retval)
3374                port->flags |= ASYNC_NORMAL_ACTIVE;
3375
3376        return retval;
3377}
3378
3379static int alloc_dma_bufs(SLMP_INFO *info)
3380{
3381        unsigned short BuffersPerFrame;
3382        unsigned short BufferCount;
3383
3384        // Force allocation to start at 64K boundary for each port.
3385        // This is necessary because *all* buffer descriptors for a port
3386        // *must* be in the same 64K block. All descriptors on a port
3387        // share a common 'base' address (upper 8 bits of 24 bits) programmed
3388        // into the CBP register.
3389        info->port_array[0]->last_mem_alloc = (SCA_MEM_SIZE/4) * info->port_num;
3390
3391        /* Calculate the number of DMA buffers necessary to hold the */
3392        /* largest allowable frame size. Note: If the max frame size is */
3393        /* not an even multiple of the DMA buffer size then we need to */
3394        /* round the buffer count per frame up one. */
3395
3396        BuffersPerFrame = (unsigned short)(info->max_frame_size/SCABUFSIZE);
3397        if ( info->max_frame_size % SCABUFSIZE )
3398                BuffersPerFrame++;
3399
3400        /* calculate total number of data buffers (SCABUFSIZE) possible
3401         * in one ports memory (SCA_MEM_SIZE/4) after allocating memory
3402         * for the descriptor list (BUFFERLISTSIZE).
3403         */
3404        BufferCount = (SCA_MEM_SIZE/4 - BUFFERLISTSIZE)/SCABUFSIZE;
3405
3406        /* limit number of buffers to maximum amount of descriptors */
3407        if (BufferCount > BUFFERLISTSIZE/sizeof(SCADESC))
3408                BufferCount = BUFFERLISTSIZE/sizeof(SCADESC);
3409
3410        /* use enough buffers to transmit one max size frame */
3411        info->tx_buf_count = BuffersPerFrame + 1;
3412
3413        /* never use more than half the available buffers for transmit */
3414        if (info->tx_buf_count > (BufferCount/2))
3415                info->tx_buf_count = BufferCount/2;
3416
3417        if (info->tx_buf_count > SCAMAXDESC)
3418                info->tx_buf_count = SCAMAXDESC;
3419
3420        /* use remaining buffers for receive */
3421        info->rx_buf_count = BufferCount - info->tx_buf_count;
3422
3423        if (info->rx_buf_count > SCAMAXDESC)
3424                info->rx_buf_count = SCAMAXDESC;
3425
3426        if ( debug_level >= DEBUG_LEVEL_INFO )
3427                printk("%s(%d):%s Allocating %d TX and %d RX DMA buffers.\n",
3428                        __FILE__,__LINE__, info->device_name,
3429                        info->tx_buf_count,info->rx_buf_count);
3430
3431        if ( alloc_buf_list( info ) < 0 ||
3432                alloc_frame_bufs(info,
3433                                        info->rx_buf_list,
3434                                        info->rx_buf_list_ex,
3435                                        info->rx_buf_count) < 0 ||
3436                alloc_frame_bufs(info,
3437                                        info->tx_buf_list,
3438                                        info->tx_buf_list_ex,
3439                                        info->tx_buf_count) < 0 ||
3440                alloc_tmp_rx_buf(info) < 0 ) {
3441                printk("%s(%d):%s Can't allocate DMA buffer memory\n",
3442                        __FILE__,__LINE__, info->device_name);
3443                return -ENOMEM;
3444        }
3445
3446        rx_reset_buffers( info );
3447
3448        return 0;
3449}
3450
3451/* Allocate DMA buffers for the transmit and receive descriptor lists.
3452 */
3453static int alloc_buf_list(SLMP_INFO *info)
3454{
3455        unsigned int i;
3456
3457        /* build list in adapter shared memory */
3458        info->buffer_list = info->memory_base + info->port_array[0]->last_mem_alloc;
3459        info->buffer_list_phys = info->port_array[0]->last_mem_alloc;
3460        info->port_array[0]->last_mem_alloc += BUFFERLISTSIZE;
3461
3462        memset(info->buffer_list, 0, BUFFERLISTSIZE);
3463
3464        /* Save virtual address pointers to the receive and */
3465        /* transmit buffer lists. (Receive 1st). These pointers will */
3466        /* be used by the processor to access the lists. */
3467        info->rx_buf_list = (SCADESC *)info->buffer_list;
3468
3469        info->tx_buf_list = (SCADESC *)info->buffer_list;
3470        info->tx_buf_list += info->rx_buf_count;
3471
3472        /* Build links for circular buffer entry lists (tx and rx)
3473         *
3474         * Note: links are physical addresses read by the SCA device
3475         * to determine the next buffer entry to use.
3476         */
3477
3478        for ( i = 0; i < info->rx_buf_count; i++ ) {
3479                /* calculate and store physical address of this buffer entry */
3480                info->rx_buf_list_ex[i].phys_entry =
3481                        info->buffer_list_phys + (i * SCABUFSIZE);
3482
3483                /* calculate and store physical address of */
3484                /* next entry in cirular list of entries */
3485                info->rx_buf_list[i].next = info->buffer_list_phys;
3486                if ( i < info->rx_buf_count - 1 )
3487                        info->rx_buf_list[i].next += (i + 1) * sizeof(SCADESC);
3488
3489                info->rx_buf_list[i].length = SCABUFSIZE;
3490        }
3491
3492        for ( i = 0; i < info->tx_buf_count; i++ ) {
3493                /* calculate and store physical address of this buffer entry */
3494                info->tx_buf_list_ex[i].phys_entry = info->buffer_list_phys +
3495                        ((info->rx_buf_count + i) * sizeof(SCADESC));
3496
3497                /* calculate and store physical address of */
3498                /* next entry in cirular list of entries */
3499
3500                info->tx_buf_list[i].next = info->buffer_list_phys +
3501                        info->rx_buf_count * sizeof(SCADESC);
3502
3503                if ( i < info->tx_buf_count - 1 )
3504                        info->tx_buf_list[i].next += (i + 1) * sizeof(SCADESC);
3505        }
3506
3507        return 0;
3508}
3509
3510/* Allocate the frame DMA buffers used by the specified buffer list.
3511 */
3512static int alloc_frame_bufs(SLMP_INFO *info, SCADESC *buf_list,SCADESC_EX *buf_list_ex,int count)
3513{
3514        int i;
3515        unsigned long phys_addr;
3516
3517        for ( i = 0; i < count; i++ ) {
3518                buf_list_ex[i].virt_addr = info->memory_base + info->port_array[0]->last_mem_alloc;
3519                phys_addr = info->port_array[0]->last_mem_alloc;
3520                info->port_array[0]->last_mem_alloc += SCABUFSIZE;
3521
3522                buf_list[i].buf_ptr  = (unsigned short)phys_addr;
3523                buf_list[i].buf_base = (unsigned char)(phys_addr >> 16);
3524        }
3525
3526        return 0;
3527}
3528
3529static void free_dma_bufs(SLMP_INFO *info)
3530{
3531        info->buffer_list = NULL;
3532        info->rx_buf_list = NULL;
3533        info->tx_buf_list = NULL;
3534}
3535
3536/* allocate buffer large enough to hold max_frame_size.
3537 * This buffer is used to pass an assembled frame to the line discipline.
3538 */
3539static int alloc_tmp_rx_buf(SLMP_INFO *info)
3540{
3541        info->tmp_rx_buf = kmalloc(info->max_frame_size, GFP_KERNEL);
3542        if (info->tmp_rx_buf == NULL)
3543                return -ENOMEM;
3544        /* unused flag buffer to satisfy receive_buf calling interface */
3545        info->flag_buf = kzalloc(info->max_frame_size, GFP_KERNEL);
3546        if (!info->flag_buf) {
3547                kfree(info->tmp_rx_buf);
3548                info->tmp_rx_buf = NULL;
3549                return -ENOMEM;
3550        }
3551        return 0;
3552}
3553
3554static void free_tmp_rx_buf(SLMP_INFO *info)
3555{
3556        kfree(info->tmp_rx_buf);
3557        info->tmp_rx_buf = NULL;
3558        kfree(info->flag_buf);
3559        info->flag_buf = NULL;
3560}
3561
3562static int claim_resources(SLMP_INFO *info)
3563{
3564        if (request_mem_region(info->phys_memory_base,SCA_MEM_SIZE,"synclinkmp") == NULL) {
3565                printk( "%s(%d):%s mem addr conflict, Addr=%08X\n",
3566                        __FILE__,__LINE__,info->device_name, info->phys_memory_base);
3567                info->init_error = DiagStatus_AddressConflict;
3568                goto errout;
3569        }
3570        else
3571                info->shared_mem_requested = true;
3572
3573        if (request_mem_region(info->phys_lcr_base + info->lcr_offset,128,"synclinkmp") == NULL) {
3574                printk( "%s(%d):%s lcr mem addr conflict, Addr=%08X\n",
3575                        __FILE__,__LINE__,info->device_name, info->phys_lcr_base);
3576                info->init_error = DiagStatus_AddressConflict;
3577                goto errout;
3578        }
3579        else
3580                info->lcr_mem_requested = true;
3581
3582        if (request_mem_region(info->phys_sca_base + info->sca_offset,SCA_BASE_SIZE,"synclinkmp") == NULL) {
3583                printk( "%s(%d):%s sca mem addr conflict, Addr=%08X\n",
3584                        __FILE__,__LINE__,info->device_name, info->phys_sca_base);
3585                info->init_error = DiagStatus_AddressConflict;
3586                goto errout;
3587        }
3588        else
3589                info->sca_base_requested = true;
3590
3591        if (request_mem_region(info->phys_statctrl_base + info->statctrl_offset,SCA_REG_SIZE,"synclinkmp") == NULL) {
3592                printk( "%s(%d):%s stat/ctrl mem addr conflict, Addr=%08X\n",
3593                        __FILE__,__LINE__,info->device_name, info->phys_statctrl_base);
3594                info->init_error = DiagStatus_AddressConflict;
3595                goto errout;
3596        }
3597        else
3598                info->sca_statctrl_requested = true;
3599
3600        info->memory_base = ioremap_nocache(info->phys_memory_base,
3601                                                                SCA_MEM_SIZE);
3602        if (!info->memory_base) {
3603                printk( "%s(%d):%s Can't map shared memory, MemAddr=%08X\n",
3604                        __FILE__,__LINE__,info->device_name, info->phys_memory_base );
3605                info->init_error = DiagStatus_CantAssignPciResources;
3606                goto errout;
3607        }
3608
3609        info->lcr_base = ioremap_nocache(info->phys_lcr_base, PAGE_SIZE);
3610        if (!info->lcr_base) {
3611                printk( "%s(%d):%s Can't map LCR memory, MemAddr=%08X\n",
3612                        __FILE__,__LINE__,info->device_name, info->phys_lcr_base );
3613                info->init_error = DiagStatus_CantAssignPciResources;
3614                goto errout;
3615        }
3616        info->lcr_base += info->lcr_offset;
3617
3618        info->sca_base = ioremap_nocache(info->phys_sca_base, PAGE_SIZE);
3619        if (!info->sca_base) {
3620                printk( "%s(%d):%s Can't map SCA memory, MemAddr=%08X\n",
3621                        __FILE__,__LINE__,info->device_name, info->phys_sca_base );
3622                info->init_error = DiagStatus_CantAssignPciResources;
3623                goto errout;
3624        }
3625        info->sca_base += info->sca_offset;
3626
3627        info->statctrl_base = ioremap_nocache(info->phys_statctrl_base,
3628                                                                PAGE_SIZE);
3629        if (!info->statctrl_base) {
3630                printk( "%s(%d):%s Can't map SCA Status/Control memory, MemAddr=%08X\n",
3631                        __FILE__,__LINE__,info->device_name, info->phys_statctrl_base );
3632                info->init_error = DiagStatus_CantAssignPciResources;
3633                goto errout;
3634        }
3635        info->statctrl_base += info->statctrl_offset;
3636
3637        if ( !memory_test(info) ) {
3638                printk( "%s(%d):Shared Memory Test failed for device %s MemAddr=%08X\n",
3639                        __FILE__,__LINE__,info->device_name, info->phys_memory_base );
3640                info->init_error = DiagStatus_MemoryError;
3641                goto errout;
3642        }
3643
3644        return 0;
3645
3646errout:
3647        release_resources( info );
3648        return -ENODEV;
3649}
3650
3651static void release_resources(SLMP_INFO *info)
3652{
3653        if ( debug_level >= DEBUG_LEVEL_INFO )
3654                printk( "%s(%d):%s release_resources() entry\n",
3655                        __FILE__,__LINE__,info->device_name );
3656
3657        if ( info->irq_requested ) {
3658                free_irq(info->irq_level, info);
3659                info->irq_requested = false;
3660        }
3661
3662        if ( info->shared_mem_requested ) {
3663                release_mem_region(info->phys_memory_base,SCA_MEM_SIZE);
3664                info->shared_mem_requested = false;
3665        }
3666        if ( info->lcr_mem_requested ) {
3667                release_mem_region(info->phys_lcr_base + info->lcr_offset,128);
3668                info->lcr_mem_requested = false;
3669        }
3670        if ( info->sca_base_requested ) {
3671                release_mem_region(info->phys_sca_base + info->sca_offset,SCA_BASE_SIZE);
3672                info->sca_base_requested = false;
3673        }
3674        if ( info->sca_statctrl_requested ) {
3675                release_mem_region(info->phys_statctrl_base + info->statctrl_offset,SCA_REG_SIZE);
3676                info->sca_statctrl_requested = false;
3677        }
3678
3679        if (info->memory_base){
3680                iounmap(info->memory_base);
3681                info->memory_base = NULL;
3682        }
3683
3684        if (info->sca_base) {
3685                iounmap(info->sca_base - info->sca_offset);
3686                info->sca_base=NULL;
3687        }
3688
3689        if (info->statctrl_base) {
3690                iounmap(info->statctrl_base - info->statctrl_offset);
3691                info->statctrl_base=NULL;
3692        }
3693
3694        if (info->lcr_base){
3695                iounmap(info->lcr_base - info->lcr_offset);
3696                info->lcr_base = NULL;
3697        }
3698
3699        if ( debug_level >= DEBUG_LEVEL_INFO )
3700                printk( "%s(%d):%s release_resources() exit\n",
3701                        __FILE__,__LINE__,info->device_name );
3702}
3703
3704/* Add the specified device instance data structure to the
3705 * global linked list of devices and increment the device count.
3706 */
3707static void add_device(SLMP_INFO *info)
3708{
3709        info->next_device = NULL;
3710        info->line = synclinkmp_device_count;
3711        sprintf(info->device_name,"ttySLM%dp%d",info->adapter_num,info->port_num);
3712
3713        if (info->line < MAX_DEVICES) {
3714                if (maxframe[info->line])
3715                        info->max_frame_size = maxframe[info->line];
3716        }
3717
3718        synclinkmp_device_count++;
3719
3720        if ( !synclinkmp_device_list )
3721                synclinkmp_device_list = info;
3722        else {
3723                SLMP_INFO *current_dev = synclinkmp_device_list;
3724                while( current_dev->next_device )
3725                        current_dev = current_dev->next_device;
3726                current_dev->next_device = info;
3727        }
3728
3729        if ( info->max_frame_size < 4096 )
3730                info->max_frame_size = 4096;
3731        else if ( info->max_frame_size > 65535 )
3732                info->max_frame_size = 65535;
3733
3734        printk( "SyncLink MultiPort %s: "
3735                "Mem=(%08x %08X %08x %08X) IRQ=%d MaxFrameSize=%u\n",
3736                info->device_name,
3737                info->phys_sca_base,
3738                info->phys_memory_base,
3739                info->phys_statctrl_base,
3740                info->phys_lcr_base,
3741                info->irq_level,
3742                info->max_frame_size );
3743
3744#if SYNCLINK_GENERIC_HDLC
3745        hdlcdev_init(info);
3746#endif
3747}
3748
3749static const struct tty_port_operations port_ops = {
3750        .carrier_raised = carrier_raised,
3751        .dtr_rts = dtr_rts,
3752};
3753
3754/* Allocate and initialize a device instance structure
3755 *
3756 * Return Value:        pointer to SLMP_INFO if success, otherwise NULL
3757 */
3758static SLMP_INFO *alloc_dev(int adapter_num, int port_num, struct pci_dev *pdev)
3759{
3760        SLMP_INFO *info;
3761
3762        info = kzalloc(sizeof(SLMP_INFO),
3763                 GFP_KERNEL);
3764
3765        if (!info) {
3766                printk("%s(%d) Error can't allocate device instance data for adapter %d, port %d\n",
3767                        __FILE__,__LINE__, adapter_num, port_num);
3768        } else {
3769                tty_port_init(&info->port);
3770                info->port.ops = &port_ops;
3771                info->magic = MGSL_MAGIC;
3772                INIT_WORK(&info->task, bh_handler);
3773                info->max_frame_size = 4096;
3774                info->port.close_delay = 5*HZ/10;
3775                info->port.closing_wait = 30*HZ;
3776                init_waitqueue_head(&info->status_event_wait_q);
3777                init_waitqueue_head(&info->event_wait_q);
3778                spin_lock_init(&info->netlock);
3779                memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS));
3780                info->idle_mode = HDLC_TXIDLE_FLAGS;
3781                info->adapter_num = adapter_num;
3782                info->port_num = port_num;
3783
3784                /* Copy configuration info to device instance data */
3785                info->irq_level = pdev->irq;
3786                info->phys_lcr_base = pci_resource_start(pdev,0);
3787                info->phys_sca_base = pci_resource_start(pdev,2);
3788                info->phys_memory_base = pci_resource_start(pdev,3);
3789                info->phys_statctrl_base = pci_resource_start(pdev,4);
3790
3791                /* Because veremap only works on page boundaries we must map
3792                 * a larger area than is actually implemented for the LCR
3793                 * memory range. We map a full page starting at the page boundary.
3794                 */
3795                info->lcr_offset    = info->phys_lcr_base & (PAGE_SIZE-1);
3796                info->phys_lcr_base &= ~(PAGE_SIZE-1);
3797
3798                info->sca_offset    = info->phys_sca_base & (PAGE_SIZE-1);
3799                info->phys_sca_base &= ~(PAGE_SIZE-1);
3800
3801                info->statctrl_offset    = info->phys_statctrl_base & (PAGE_SIZE-1);
3802                info->phys_statctrl_base &= ~(PAGE_SIZE-1);
3803
3804                info->bus_type = MGSL_BUS_TYPE_PCI;
3805                info->irq_flags = IRQF_SHARED;
3806
3807                setup_timer(&info->tx_timer, tx_timeout, (unsigned long)info);
3808                setup_timer(&info->status_timer, status_timeout,
3809                                (unsigned long)info);
3810
3811                /* Store the PCI9050 misc control register value because a flaw
3812                 * in the PCI9050 prevents LCR registers from being read if
3813                 * BIOS assigns an LCR base address with bit 7 set.
3814                 *
3815                 * Only the misc control register is accessed for which only
3816                 * write access is needed, so set an initial value and change
3817                 * bits to the device instance data as we write the value
3818                 * to the actual misc control register.
3819                 */
3820                info->misc_ctrl_value = 0x087e4546;
3821
3822                /* initial port state is unknown - if startup errors
3823                 * occur, init_error will be set to indicate the
3824                 * problem. Once the port is fully initialized,
3825                 * this value will be set to 0 to indicate the
3826                 * port is available.
3827                 */
3828                info->init_error = -1;
3829        }
3830
3831        return info;
3832}
3833
3834static void device_init(int adapter_num, struct pci_dev *pdev)
3835{
3836        SLMP_INFO *port_array[SCA_MAX_PORTS];
3837        int port;
3838
3839        /* allocate device instances for up to SCA_MAX_PORTS devices */
3840        for ( port = 0; port < SCA_MAX_PORTS; ++port ) {
3841                port_array[port] = alloc_dev(adapter_num,port,pdev);
3842                if( port_array[port] == NULL ) {
3843                        for (--port; port >= 0; --port) {
3844                                tty_port_destroy(&port_array[port]->port);
3845                                kfree(port_array[port]);
3846                        }
3847                        return;
3848                }
3849        }
3850
3851        /* give copy of port_array to all ports and add to device list  */
3852        for ( port = 0; port < SCA_MAX_PORTS; ++port ) {
3853                memcpy(port_array[port]->port_array,port_array,sizeof(port_array));
3854                add_device( port_array[port] );
3855                spin_lock_init(&port_array[port]->lock);
3856        }
3857
3858        /* Allocate and claim adapter resources */
3859        if ( !claim_resources(port_array[0]) ) {
3860
3861                alloc_dma_bufs(port_array[0]);
3862
3863                /* copy resource information from first port to others */
3864                for ( port = 1; port < SCA_MAX_PORTS; ++port ) {
3865                        port_array[port]->lock  = port_array[0]->lock;
3866                        port_array[port]->irq_level     = port_array[0]->irq_level;
3867                        port_array[port]->memory_base   = port_array[0]->memory_base;
3868                        port_array[port]->sca_base      = port_array[0]->sca_base;
3869                        port_array[port]->statctrl_base = port_array[0]->statctrl_base;
3870                        port_array[port]->lcr_base      = port_array[0]->lcr_base;
3871                        alloc_dma_bufs(port_array[port]);
3872                }
3873
3874                if ( request_irq(port_array[0]->irq_level,
3875                                        synclinkmp_interrupt,
3876                                        port_array[0]->irq_flags,
3877                                        port_array[0]->device_name,
3878                                        port_array[0]) < 0 ) {
3879                        printk( "%s(%d):%s Can't request interrupt, IRQ=%d\n",
3880                                __FILE__,__LINE__,
3881                                port_array[0]->device_name,
3882                                port_array[0]->irq_level );
3883                }
3884                else {
3885                        port_array[0]->irq_requested = true;
3886                        adapter_test(port_array[0]);
3887                }
3888        }
3889}
3890
3891static const struct tty_operations ops = {
3892        .install = install,
3893        .open = open,
3894        .close = close,
3895        .write = write,
3896        .put_char = put_char,
3897        .flush_chars = flush_chars,
3898        .write_room = write_room,
3899        .chars_in_buffer = chars_in_buffer,
3900        .flush_buffer = flush_buffer,
3901        .ioctl = ioctl,
3902        .throttle = throttle,
3903        .unthrottle = unthrottle,
3904        .send_xchar = send_xchar,
3905        .break_ctl = set_break,
3906        .wait_until_sent = wait_until_sent,
3907        .set_termios = set_termios,
3908        .stop = tx_hold,
3909        .start = tx_release,
3910        .hangup = hangup,
3911        .tiocmget = tiocmget,
3912        .tiocmset = tiocmset,
3913        .get_icount = get_icount,
3914        .proc_fops = &synclinkmp_proc_fops,
3915};
3916
3917
3918static void synclinkmp_cleanup(void)
3919{
3920        int rc;
3921        SLMP_INFO *info;
3922        SLMP_INFO *tmp;
3923
3924        printk("Unloading %s %s\n", driver_name, driver_version);
3925
3926        if (serial_driver) {
3927                if ((rc = tty_unregister_driver(serial_driver)))
3928                        printk("%s(%d) failed to unregister tty driver err=%d\n",
3929                               __FILE__,__LINE__,rc);
3930                put_tty_driver(serial_driver);
3931        }
3932
3933        /* reset devices */
3934        info = synclinkmp_device_list;
3935        while(info) {
3936                reset_port(info);
3937                info = info->next_device;
3938        }
3939
3940        /* release devices */
3941        info = synclinkmp_device_list;
3942        while(info) {
3943#if SYNCLINK_GENERIC_HDLC
3944                hdlcdev_exit(info);
3945#endif
3946                free_dma_bufs(info);
3947                free_tmp_rx_buf(info);
3948                if ( info->port_num == 0 ) {
3949                        if (info->sca_base)
3950                                write_reg(info, LPR, 1); /* set low power mode */
3951                        release_resources(info);
3952                }
3953                tmp = info;
3954                info = info->next_device;
3955                tty_port_destroy(&tmp->port);
3956                kfree(tmp);
3957        }
3958
3959        pci_unregister_driver(&synclinkmp_pci_driver);
3960}
3961
3962/* Driver initialization entry point.
3963 */
3964
3965static int __init synclinkmp_init(void)
3966{
3967        int rc;
3968
3969        if (break_on_load) {
3970                synclinkmp_get_text_ptr();
3971                BREAKPOINT();
3972        }
3973
3974        printk("%s %s\n", driver_name, driver_version);
3975
3976        if ((rc = pci_register_driver(&synclinkmp_pci_driver)) < 0) {
3977                printk("%s:failed to register PCI driver, error=%d\n",__FILE__,rc);
3978                return rc;
3979        }
3980
3981        serial_driver = alloc_tty_driver(128);
3982        if (!serial_driver) {
3983                rc = -ENOMEM;
3984                goto error;
3985        }
3986
3987        /* Initialize the tty_driver structure */
3988
3989        serial_driver->driver_name = "synclinkmp";
3990        serial_driver->name = "ttySLM";
3991        serial_driver->major = ttymajor;
3992        serial_driver->minor_start = 64;
3993        serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
3994        serial_driver->subtype = SERIAL_TYPE_NORMAL;
3995        serial_driver->init_termios = tty_std_termios;
3996        serial_driver->init_termios.c_cflag =
3997                B9600 | CS8 | CREAD | HUPCL | CLOCAL;
3998        serial_driver->init_termios.c_ispeed = 9600;
3999        serial_driver->init_termios.c_ospeed = 9600;
4000        serial_driver->flags = TTY_DRIVER_REAL_RAW;
4001        tty_set_operations(serial_driver, &ops);
4002        if ((rc = tty_register_driver(serial_driver)) < 0) {
4003                printk("%s(%d):Couldn't register serial driver\n",
4004                        __FILE__,__LINE__);
4005                put_tty_driver(serial_driver);
4006                serial_driver = NULL;
4007                goto error;
4008        }
4009
4010        printk("%s %s, tty major#%d\n",
4011                driver_name, driver_version,
4012                serial_driver->major);
4013
4014        return 0;
4015
4016error:
4017        synclinkmp_cleanup();
4018        return rc;
4019}
4020
4021static void __exit synclinkmp_exit(void)
4022{
4023        synclinkmp_cleanup();
4024}
4025
4026module_init(synclinkmp_init);
4027module_exit(synclinkmp_exit);
4028
4029/* Set the port for internal loopback mode.
4030 * The TxCLK and RxCLK signals are generated from the BRG and
4031 * the TxD is looped back to the RxD internally.
4032 */
4033static void enable_loopback(SLMP_INFO *info, int enable)
4034{
4035        if (enable) {
4036                /* MD2 (Mode Register 2)
4037                 * 01..00  CNCT<1..0> Channel Connection 11=Local Loopback
4038                 */
4039                write_reg(info, MD2, (unsigned char)(read_reg(info, MD2) | (BIT1 + BIT0)));
4040
4041                /* degate external TxC clock source */
4042                info->port_array[0]->ctrlreg_value |= (BIT0 << (info->port_num * 2));
4043                write_control_reg(info);
4044
4045                /* RXS/TXS (Rx/Tx clock source)
4046                 * 07      Reserved, must be 0
4047                 * 06..04  Clock Source, 100=BRG
4048                 * 03..00  Clock Divisor, 0000=1
4049                 */
4050                write_reg(info, RXS, 0x40);
4051                write_reg(info, TXS, 0x40);
4052
4053        } else {
4054                /* MD2 (Mode Register 2)
4055                 * 01..00  CNCT<1..0> Channel connection, 0=normal
4056                 */
4057                write_reg(info, MD2, (unsigned char)(read_reg(info, MD2) & ~(BIT1 + BIT0)));
4058
4059                /* RXS/TXS (Rx/Tx clock source)
4060                 * 07      Reserved, must be 0
4061                 * 06..04  Clock Source, 000=RxC/TxC Pin
4062                 * 03..00  Clock Divisor, 0000=1
4063                 */
4064                write_reg(info, RXS, 0x00);
4065                write_reg(info, TXS, 0x00);
4066        }
4067
4068        /* set LinkSpeed if available, otherwise default to 2Mbps */
4069        if (info->params.clock_speed)
4070                set_rate(info, info->params.clock_speed);
4071        else
4072                set_rate(info, 3686400);
4073}
4074
4075/* Set the baud rate register to the desired speed
4076 *
4077 *      data_rate       data rate of clock in bits per second
4078 *                      A data rate of 0 disables the AUX clock.
4079 */
4080static void set_rate( SLMP_INFO *info, u32 data_rate )
4081{
4082        u32 TMCValue;
4083        unsigned char BRValue;
4084        u32 Divisor=0;
4085
4086        /* fBRG = fCLK/(TMC * 2^BR)
4087         */
4088        if (data_rate != 0) {
4089                Divisor = 14745600/data_rate;
4090                if (!Divisor)
4091                        Divisor = 1;
4092
4093                TMCValue = Divisor;
4094
4095                BRValue = 0;
4096                if (TMCValue != 1 && TMCValue != 2) {
4097                        /* BRValue of 0 provides 50/50 duty cycle *only* when
4098                         * TMCValue is 1 or 2. BRValue of 1 to 9 always provides
4099                         * 50/50 duty cycle.
4100                         */
4101                        BRValue = 1;
4102                        TMCValue >>= 1;
4103                }
4104
4105                /* while TMCValue is too big for TMC register, divide
4106                 * by 2 and increment BR exponent.
4107                 */
4108                for(; TMCValue > 256 && BRValue < 10; BRValue++)
4109                        TMCValue >>= 1;
4110
4111                write_reg(info, TXS,
4112                        (unsigned char)((read_reg(info, TXS) & 0xf0) | BRValue));
4113                write_reg(info, RXS,
4114                        (unsigned char)((read_reg(info, RXS) & 0xf0) | BRValue));
4115                write_reg(info, TMC, (unsigned char)TMCValue);
4116        }
4117        else {
4118                write_reg(info, TXS,0);
4119                write_reg(info, RXS,0);
4120                write_reg(info, TMC, 0);
4121        }
4122}
4123
4124/* Disable receiver
4125 */
4126static void rx_stop(SLMP_INFO *info)
4127{
4128        if (debug_level >= DEBUG_LEVEL_ISR)
4129                printk("%s(%d):%s rx_stop()\n",
4130                         __FILE__,__LINE__, info->device_name );
4131
4132        write_reg(info, CMD, RXRESET);
4133
4134        info->ie0_value &= ~RXRDYE;
4135        write_reg(info, IE0, info->ie0_value);  /* disable Rx data interrupts */
4136
4137        write_reg(info, RXDMA + DSR, 0);        /* disable Rx DMA */
4138        write_reg(info, RXDMA + DCMD, SWABORT); /* reset/init Rx DMA */
4139        write_reg(info, RXDMA + DIR, 0);        /* disable Rx DMA interrupts */
4140
4141        info->rx_enabled = false;
4142        info->rx_overflow = false;
4143}
4144
4145/* enable the receiver
4146 */
4147static void rx_start(SLMP_INFO *info)
4148{
4149        int i;
4150
4151        if (debug_level >= DEBUG_LEVEL_ISR)
4152                printk("%s(%d):%s rx_start()\n",
4153                         __FILE__,__LINE__, info->device_name );
4154
4155        write_reg(info, CMD, RXRESET);
4156
4157        if ( info->params.mode == MGSL_MODE_HDLC ) {
4158                /* HDLC, disabe IRQ on rxdata */
4159                info->ie0_value &= ~RXRDYE;
4160                write_reg(info, IE0, info->ie0_value);
4161
4162                /* Reset all Rx DMA buffers and program rx dma */
4163                write_reg(info, RXDMA + DSR, 0);                /* disable Rx DMA */
4164                write_reg(info, RXDMA + DCMD, SWABORT); /* reset/init Rx DMA */
4165
4166                for (i = 0; i < info->rx_buf_count; i++) {
4167                        info->rx_buf_list[i].status = 0xff;
4168
4169                        // throttle to 4 shared memory writes at a time to prevent
4170                        // hogging local bus (keep latency time for DMA requests low).
4171                        if (!(i % 4))
4172                                read_status_reg(info);
4173                }
4174                info->current_rx_buf = 0;
4175
4176                /* set current/1st descriptor address */
4177                write_reg16(info, RXDMA + CDA,
4178                        info->rx_buf_list_ex[0].phys_entry);
4179
4180                /* set new last rx descriptor address */
4181                write_reg16(info, RXDMA + EDA,
4182                        info->rx_buf_list_ex[info->rx_buf_count - 1].phys_entry);
4183
4184                /* set buffer length (shared by all rx dma data buffers) */
4185                write_reg16(info, RXDMA + BFL, SCABUFSIZE);
4186
4187                write_reg(info, RXDMA + DIR, 0x60);     /* enable Rx DMA interrupts (EOM/BOF) */
4188                write_reg(info, RXDMA + DSR, 0xf2);     /* clear Rx DMA IRQs, enable Rx DMA */
4189        } else {
4190                /* async, enable IRQ on rxdata */
4191                info->ie0_value |= RXRDYE;
4192                write_reg(info, IE0, info->ie0_value);
4193        }
4194
4195        write_reg(info, CMD, RXENABLE);
4196
4197        info->rx_overflow = false;
4198        info->rx_enabled = true;
4199}
4200
4201/* Enable the transmitter and send a transmit frame if
4202 * one is loaded in the DMA buffers.
4203 */
4204static void tx_start(SLMP_INFO *info)
4205{
4206        if (debug_level >= DEBUG_LEVEL_ISR)
4207                printk("%s(%d):%s tx_start() tx_count=%d\n",
4208                         __FILE__,__LINE__, info->device_name,info->tx_count );
4209
4210        if (!info->tx_enabled ) {
4211                write_reg(info, CMD, TXRESET);
4212                write_reg(info, CMD, TXENABLE);
4213                info->tx_enabled = true;
4214        }
4215
4216        if ( info->tx_count ) {
4217
4218                /* If auto RTS enabled and RTS is inactive, then assert */
4219                /* RTS and set a flag indicating that the driver should */
4220                /* negate RTS when the transmission completes. */
4221
4222                info->drop_rts_on_tx_done = false;
4223
4224                if (info->params.mode != MGSL_MODE_ASYNC) {
4225
4226                        if ( info->params.flags & HDLC_FLAG_AUTO_RTS ) {
4227                                get_signals( info );
4228                                if ( !(info->serial_signals & SerialSignal_RTS) ) {
4229                                        info->serial_signals |= SerialSignal_RTS;
4230                                        set_signals( info );
4231                                        info->drop_rts_on_tx_done = true;
4232                                }
4233                        }
4234
4235                        write_reg16(info, TRC0,
4236                                (unsigned short)(((tx_negate_fifo_level-1)<<8) + tx_active_fifo_level));
4237
4238                        write_reg(info, TXDMA + DSR, 0);                /* disable DMA channel */
4239                        write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */
4240        
4241                        /* set TX CDA (current descriptor address) */
4242                        write_reg16(info, TXDMA + CDA,
4243                                info->tx_buf_list_ex[0].phys_entry);
4244        
4245                        /* set TX EDA (last descriptor address) */
4246                        write_reg16(info, TXDMA + EDA,
4247                                info->tx_buf_list_ex[info->last_tx_buf].phys_entry);
4248        
4249                        /* enable underrun IRQ */
4250                        info->ie1_value &= ~IDLE;
4251                        info->ie1_value |= UDRN;
4252                        write_reg(info, IE1, info->ie1_value);
4253                        write_reg(info, SR1, (unsigned char)(IDLE + UDRN));
4254        
4255                        write_reg(info, TXDMA + DIR, 0x40);             /* enable Tx DMA interrupts (EOM) */
4256                        write_reg(info, TXDMA + DSR, 0xf2);             /* clear Tx DMA IRQs, enable Tx DMA */
4257        
4258                        mod_timer(&info->tx_timer, jiffies +
4259                                        msecs_to_jiffies(5000));
4260                }
4261                else {
4262                        tx_load_fifo(info);
4263                        /* async, enable IRQ on txdata */
4264                        info->ie0_value |= TXRDYE;
4265                        write_reg(info, IE0, info->ie0_value);
4266                }
4267
4268                info->tx_active = true;
4269        }
4270}
4271
4272/* stop the transmitter and DMA
4273 */
4274static void tx_stop( SLMP_INFO *info )
4275{
4276        if (debug_level >= DEBUG_LEVEL_ISR)
4277                printk("%s(%d):%s tx_stop()\n",
4278                         __FILE__,__LINE__, info->device_name );
4279
4280        del_timer(&info->tx_timer);
4281
4282        write_reg(info, TXDMA + DSR, 0);                /* disable DMA channel */
4283        write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */
4284
4285        write_reg(info, CMD, TXRESET);
4286
4287        info->ie1_value &= ~(UDRN + IDLE);
4288        write_reg(info, IE1, info->ie1_value);  /* disable tx status interrupts */
4289        write_reg(info, SR1, (unsigned char)(IDLE + UDRN));     /* clear pending */
4290
4291        info->ie0_value &= ~TXRDYE;
4292        write_reg(info, IE0, info->ie0_value);  /* disable tx data interrupts */
4293
4294        info->tx_enabled = false;
4295        info->tx_active = false;
4296}
4297
4298/* Fill the transmit FIFO until the FIFO is full or
4299 * there is no more data to load.
4300 */
4301static void tx_load_fifo(SLMP_INFO *info)
4302{
4303        u8 TwoBytes[2];
4304
4305        /* do nothing is now tx data available and no XON/XOFF pending */
4306
4307        if ( !info->tx_count && !info->x_char )
4308                return;
4309
4310        /* load the Transmit FIFO until FIFOs full or all data sent */
4311
4312        while( info->tx_count && (read_reg(info,SR0) & BIT1) ) {
4313
4314                /* there is more space in the transmit FIFO and */
4315                /* there is more data in transmit buffer */
4316
4317                if ( (info->tx_count > 1) && !info->x_char ) {
4318                        /* write 16-bits */
4319                        TwoBytes[0] = info->tx_buf[info->tx_get++];
4320                        if (info->tx_get >= info->max_frame_size)
4321                                info->tx_get -= info->max_frame_size;
4322                        TwoBytes[1] = info->tx_buf[info->tx_get++];
4323                        if (info->tx_get >= info->max_frame_size)
4324                                info->tx_get -= info->max_frame_size;
4325
4326                        write_reg16(info, TRB, *((u16 *)TwoBytes));
4327
4328                        info->tx_count -= 2;
4329                        info->icount.tx += 2;
4330                } else {
4331                        /* only 1 byte left to transmit or 1 FIFO slot left */
4332
4333                        if (info->x_char) {
4334                                /* transmit pending high priority char */
4335                                write_reg(info, TRB, info->x_char);
4336                                info->x_char = 0;
4337                        } else {
4338                                write_reg(info, TRB, info->tx_buf[info->tx_get++]);
4339                                if (info->tx_get >= info->max_frame_size)
4340                                        info->tx_get -= info->max_frame_size;
4341                                info->tx_count--;
4342                        }
4343                        info->icount.tx++;
4344                }
4345        }
4346}
4347
4348/* Reset a port to a known state
4349 */
4350static void reset_port(SLMP_INFO *info)
4351{
4352        if (info->sca_base) {
4353
4354                tx_stop(info);
4355                rx_stop(info);
4356
4357                info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
4358                set_signals(info);
4359
4360                /* disable all port interrupts */
4361                info->ie0_value = 0;
4362                info->ie1_value = 0;
4363                info->ie2_value = 0;
4364                write_reg(info, IE0, info->ie0_value);
4365                write_reg(info, IE1, info->ie1_value);
4366                write_reg(info, IE2, info->ie2_value);
4367
4368                write_reg(info, CMD, CHRESET);
4369        }
4370}
4371
4372/* Reset all the ports to a known state.
4373 */
4374static void reset_adapter(SLMP_INFO *info)
4375{
4376        int i;
4377
4378        for ( i=0; i < SCA_MAX_PORTS; ++i) {
4379                if (info->port_array[i])
4380                        reset_port(info->port_array[i]);
4381        }
4382}
4383
4384/* Program port for asynchronous communications.
4385 */
4386static void async_mode(SLMP_INFO *info)
4387{
4388
4389        unsigned char RegValue;
4390
4391        tx_stop(info);
4392        rx_stop(info);
4393
4394        /* MD0, Mode Register 0
4395         *
4396         * 07..05  PRCTL<2..0>, Protocol Mode, 000=async
4397         * 04      AUTO, Auto-enable (RTS/CTS/DCD)
4398         * 03      Reserved, must be 0
4399         * 02      CRCCC, CRC Calculation, 0=disabled
4400         * 01..00  STOP<1..0> Stop bits (00=1,10=2)
4401         *
4402         * 0000 0000
4403         */
4404        RegValue = 0x00;
4405        if (info->params.stop_bits != 1)
4406                RegValue |= BIT1;
4407        write_reg(info, MD0, RegValue);
4408
4409        /* MD1, Mode Register 1
4410         *
4411         * 07..06  BRATE<1..0>, bit rate, 00=1/1 01=1/16 10=1/32 11=1/64
4412         * 05..04  TXCHR<1..0>, tx char size, 00=8 bits,01=7,10=6,11=5
4413         * 03..02  RXCHR<1..0>, rx char size
4414         * 01..00  PMPM<1..0>, Parity mode, 00=none 10=even 11=odd
4415         *
4416         * 0100 0000
4417         */
4418        RegValue = 0x40;
4419        switch (info->params.data_bits) {
4420        case 7: RegValue |= BIT4 + BIT2; break;
4421        case 6: RegValue |= BIT5 + BIT3; break;
4422        case 5: RegValue |= BIT5 + BIT4 + BIT3 + BIT2; break;
4423        }
4424        if (info->params.parity != ASYNC_PARITY_NONE) {
4425                RegValue |= BIT1;
4426                if (info->params.parity == ASYNC_PARITY_ODD)
4427                        RegValue |= BIT0;
4428        }
4429        write_reg(info, MD1, RegValue);
4430
4431        /* MD2, Mode Register 2
4432         *
4433         * 07..02  Reserved, must be 0
4434         * 01..00  CNCT<1..0> Channel connection, 00=normal 11=local loopback
4435         *
4436         * 0000 0000
4437         */
4438        RegValue = 0x00;
4439        if (info->params.loopback)
4440                RegValue |= (BIT1 + BIT0);
4441        write_reg(info, MD2, RegValue);
4442
4443        /* RXS, Receive clock source
4444         *
4445         * 07      Reserved, must be 0
4446         * 06..04  RXCS<2..0>, clock source, 000=RxC Pin, 100=BRG, 110=DPLL
4447         * 03..00  RXBR<3..0>, rate divisor, 0000=1
4448         */
4449        RegValue=BIT6;
4450        write_reg(info, RXS, RegValue);
4451
4452        /* TXS, Transmit clock source
4453         *
4454         * 07      Reserved, must be 0
4455         * 06..04  RXCS<2..0>, clock source, 000=TxC Pin, 100=BRG, 110=Receive Clock
4456         * 03..00  RXBR<3..0>, rate divisor, 0000=1
4457         */
4458        RegValue=BIT6;
4459        write_reg(info, TXS, RegValue);
4460
4461        /* Control Register
4462         *
4463         * 6,4,2,0  CLKSEL<3..0>, 0 = TcCLK in, 1 = Auxclk out
4464         */
4465        info->port_array[0]->ctrlreg_value |= (BIT0 << (info->port_num * 2));
4466        write_control_reg(info);
4467
4468        tx_set_idle(info);
4469
4470        /* RRC Receive Ready Control 0
4471         *
4472         * 07..05  Reserved, must be 0
4473         * 04..00  RRC<4..0> Rx FIFO trigger active 0x00 = 1 byte
4474         */
4475        write_reg(info, RRC, 0x00);
4476
4477        /* TRC0 Transmit Ready Control 0
4478         *
4479         * 07..05  Reserved, must be 0
4480         * 04..00  TRC<4..0> Tx FIFO trigger active 0x10 = 16 bytes
4481         */
4482        write_reg(info, TRC0, 0x10);
4483
4484        /* TRC1 Transmit Ready Control 1
4485         *
4486         * 07..05  Reserved, must be 0
4487         * 04..00  TRC<4..0> Tx FIFO trigger inactive 0x1e = 31 bytes (full-1)
4488         */
4489        write_reg(info, TRC1, 0x1e);
4490
4491        /* CTL, MSCI control register
4492         *
4493         * 07..06  Reserved, set to 0
4494         * 05      UDRNC, underrun control, 0=abort 1=CRC+flag (HDLC/BSC)
4495         * 04      IDLC, idle control, 0=mark 1=idle register
4496         * 03      BRK, break, 0=off 1 =on (async)
4497         * 02      SYNCLD, sync char load enable (BSC) 1=enabled
4498         * 01      GOP, go active on poll (LOOP mode) 1=enabled
4499         * 00      RTS, RTS output control, 0=active 1=inactive
4500         *
4501         * 0001 0001
4502         */
4503        RegValue = 0x10;
4504        if (!(info->serial_signals & SerialSignal_RTS))
4505                RegValue |= 0x01;
4506        write_reg(info, CTL, RegValue);
4507
4508        /* enable status interrupts */
4509        info->ie0_value |= TXINTE + RXINTE;
4510        write_reg(info, IE0, info->ie0_value);
4511
4512        /* enable break detect interrupt */
4513        info->ie1_value = BRKD;
4514        write_reg(info, IE1, info->ie1_value);
4515
4516        /* enable rx overrun interrupt */
4517        info->ie2_value = OVRN;
4518        write_reg(info, IE2, info->ie2_value);
4519
4520        set_rate( info, info->params.data_rate * 16 );
4521}
4522
4523/* Program the SCA for HDLC communications.
4524 */
4525static void hdlc_mode(SLMP_INFO *info)
4526{
4527        unsigned char RegValue;
4528        u32 DpllDivisor;
4529
4530        // Can't use DPLL because SCA outputs recovered clock on RxC when
4531        // DPLL mode selected. This causes output contention with RxC receiver.
4532        // Use of DPLL would require external hardware to disable RxC receiver
4533        // when DPLL mode selected.
4534        info->params.flags &= ~(HDLC_FLAG_TXC_DPLL + HDLC_FLAG_RXC_DPLL);
4535
4536        /* disable DMA interrupts */
4537        write_reg(info, TXDMA + DIR, 0);
4538        write_reg(info, RXDMA + DIR, 0);
4539
4540        /* MD0, Mode Register 0
4541         *
4542         * 07..05  PRCTL<2..0>, Protocol Mode, 100=HDLC
4543         * 04      AUTO, Auto-enable (RTS/CTS/DCD)
4544         * 03      Reserved, must be 0
4545         * 02      CRCCC, CRC Calculation, 1=enabled
4546         * 01      CRC1, CRC selection, 0=CRC-16,1=CRC-CCITT-16
4547         * 00      CRC0, CRC initial value, 1 = all 1s
4548         *
4549         * 1000 0001
4550         */
4551        RegValue = 0x81;
4552        if (info->params.flags & HDLC_FLAG_AUTO_CTS)
4553                RegValue |= BIT4;
4554        if (info->params.flags & HDLC_FLAG_AUTO_DCD)
4555                RegValue |= BIT4;
4556        if (info->params.crc_type == HDLC_CRC_16_CCITT)
4557                RegValue |= BIT2 + BIT1;
4558        write_reg(info, MD0, RegValue);
4559
4560        /* MD1, Mode Register 1
4561         *
4562         * 07..06  ADDRS<1..0>, Address detect, 00=no addr check
4563         * 05..04  TXCHR<1..0>, tx char size, 00=8 bits
4564         * 03..02  RXCHR<1..0>, rx char size, 00=8 bits
4565         * 01..00  PMPM<1..0>, Parity mode, 00=no parity
4566         *
4567         * 0000 0000
4568         */
4569        RegValue = 0x00;
4570        write_reg(info, MD1, RegValue);
4571
4572        /* MD2, Mode Register 2
4573         *
4574         * 07      NRZFM, 0=NRZ, 1=FM
4575         * 06..05  CODE<1..0> Encoding, 00=NRZ
4576         * 04..03  DRATE<1..0> DPLL Divisor, 00=8
4577         * 02      Reserved, must be 0
4578         * 01..00  CNCT<1..0> Channel connection, 0=normal
4579         *
4580         * 0000 0000
4581         */
4582        RegValue = 0x00;
4583        switch(info->params.encoding) {
4584        case HDLC_ENCODING_NRZI:          RegValue |= BIT5; break;
4585        case HDLC_ENCODING_BIPHASE_MARK:  RegValue |= BIT7 + BIT5; break; /* aka FM1 */
4586        case HDLC_ENCODING_BIPHASE_SPACE: RegValue |= BIT7 + BIT6; break; /* aka FM0 */
4587        case HDLC_ENCODING_BIPHASE_LEVEL: RegValue |= BIT7; break;      /* aka Manchester */
4588#if 0
4589        case HDLC_ENCODING_NRZB:                                        /* not supported */
4590        case HDLC_ENCODING_NRZI_MARK:                                   /* not supported */
4591        case HDLC_ENCODING_DIFF_BIPHASE_LEVEL:                          /* not supported */
4592#endif
4593        }
4594        if ( info->params.flags & HDLC_FLAG_DPLL_DIV16 ) {
4595                DpllDivisor = 16;
4596                RegValue |= BIT3;
4597        } else if ( info->params.flags & HDLC_FLAG_DPLL_DIV8 ) {
4598                DpllDivisor = 8;
4599        } else {
4600                DpllDivisor = 32;
4601                RegValue |= BIT4;
4602        }
4603        write_reg(info, MD2, RegValue);
4604
4605
4606        /* RXS, Receive clock source
4607         *
4608         * 07      Reserved, must be 0
4609         * 06..04  RXCS<2..0>, clock source, 000=RxC Pin, 100=BRG, 110=DPLL
4610         * 03..00  RXBR<3..0>, rate divisor, 0000=1
4611         */
4612        RegValue=0;
4613        if (info->params.flags & HDLC_FLAG_RXC_BRG)
4614                RegValue |= BIT6;
4615        if (info->params.flags & HDLC_FLAG_RXC_DPLL)
4616                RegValue |= BIT6 + BIT5;
4617        write_reg(info, RXS, RegValue);
4618
4619        /* TXS, Transmit clock source
4620         *
4621         * 07      Reserved, must be 0
4622         * 06..04  RXCS<2..0>, clock source, 000=TxC Pin, 100=BRG, 110=Receive Clock
4623         * 03..00  RXBR<3..0>, rate divisor, 0000=1
4624         */
4625        RegValue=0;
4626        if (info->params.flags & HDLC_FLAG_TXC_BRG)
4627                RegValue |= BIT6;
4628        if (info->params.flags & HDLC_FLAG_TXC_DPLL)
4629                RegValue |= BIT6 + BIT5;
4630        write_reg(info, TXS, RegValue);
4631
4632        if (info->params.flags & HDLC_FLAG_RXC_DPLL)
4633                set_rate(info, info->params.clock_speed * DpllDivisor);
4634        else
4635                set_rate(info, info->params.clock_speed);
4636
4637        /* GPDATA (General Purpose I/O Data Register)
4638         *
4639         * 6,4,2,0  CLKSEL<3..0>, 0 = TcCLK in, 1 = Auxclk out
4640         */
4641        if (info->params.flags & HDLC_FLAG_TXC_BRG)
4642                info->port_array[0]->ctrlreg_value |= (BIT0 << (info->port_num * 2));
4643        else
4644                info->port_array[0]->ctrlreg_value &= ~(BIT0 << (info->port_num * 2));
4645        write_control_reg(info);
4646
4647        /* RRC Receive Ready Control 0
4648         *
4649         * 07..05  Reserved, must be 0
4650         * 04..00  RRC<4..0> Rx FIFO trigger active
4651         */
4652        write_reg(info, RRC, rx_active_fifo_level);
4653
4654        /* TRC0 Transmit Ready Control 0
4655         *
4656         * 07..05  Reserved, must be 0
4657         * 04..00  TRC<4..0> Tx FIFO trigger active
4658         */
4659        write_reg(info, TRC0, tx_active_fifo_level);
4660
4661        /* TRC1 Transmit Ready Control 1
4662         *
4663         * 07..05  Reserved, must be 0
4664         * 04..00  TRC<4..0> Tx FIFO trigger inactive 0x1f = 32 bytes (full)
4665         */
4666        write_reg(info, TRC1, (unsigned char)(tx_negate_fifo_level - 1));
4667
4668        /* DMR, DMA Mode Register
4669         *
4670         * 07..05  Reserved, must be 0
4671         * 04      TMOD, Transfer Mode: 1=chained-block
4672         * 03      Reserved, must be 0
4673         * 02      NF, Number of Frames: 1=multi-frame
4674         * 01      CNTE, Frame End IRQ Counter enable: 0=disabled
4675         * 00      Reserved, must be 0
4676         *
4677         * 0001 0100
4678         */
4679        write_reg(info, TXDMA + DMR, 0x14);
4680        write_reg(info, RXDMA + DMR, 0x14);
4681
4682        /* Set chain pointer base (upper 8 bits of 24 bit addr) */
4683        write_reg(info, RXDMA + CPB,
4684                (unsigned char)(info->buffer_list_phys >> 16));
4685
4686        /* Set chain pointer base (upper 8 bits of 24 bit addr) */
4687        write_reg(info, TXDMA + CPB,
4688                (unsigned char)(info->buffer_list_phys >> 16));
4689
4690        /* enable status interrupts. other code enables/disables
4691         * the individual sources for these two interrupt classes.
4692         */
4693        info->ie0_value |= TXINTE + RXINTE;
4694        write_reg(info, IE0, info->ie0_value);
4695
4696        /* CTL, MSCI control register
4697         *
4698         * 07..06  Reserved, set to 0
4699         * 05      UDRNC, underrun control, 0=abort 1=CRC+flag (HDLC/BSC)
4700         * 04      IDLC, idle control, 0=mark 1=idle register
4701         * 03      BRK, break, 0=off 1 =on (async)
4702         * 02      SYNCLD, sync char load enable (BSC) 1=enabled
4703         * 01      GOP, go active on poll (LOOP mode) 1=enabled
4704         * 00      RTS, RTS output control, 0=active 1=inactive
4705         *
4706         * 0001 0001
4707         */
4708        RegValue = 0x10;
4709        if (!(info->serial_signals & SerialSignal_RTS))
4710                RegValue |= 0x01;
4711        write_reg(info, CTL, RegValue);
4712
4713        /* preamble not supported ! */
4714
4715        tx_set_idle(info);
4716        tx_stop(info);
4717        rx_stop(info);
4718
4719        set_rate(info, info->params.clock_speed);
4720
4721        if (info->params.loopback)
4722                enable_loopback(info,1);
4723}
4724
4725/* Set the transmit HDLC idle mode
4726 */
4727static void tx_set_idle(SLMP_INFO *info)
4728{
4729        unsigned char RegValue = 0xff;
4730
4731        /* Map API idle mode to SCA register bits */
4732        switch(info->idle_mode) {
4733        case HDLC_TXIDLE_FLAGS:                 RegValue = 0x7e; break;
4734        case HDLC_TXIDLE_ALT_ZEROS_ONES:        RegValue = 0xaa; break;
4735        case HDLC_TXIDLE_ZEROS:                 RegValue = 0x00; break;
4736        case HDLC_TXIDLE_ONES:                  RegValue = 0xff; break;
4737        case HDLC_TXIDLE_ALT_MARK_SPACE:        RegValue = 0xaa; break;
4738        case HDLC_TXIDLE_SPACE:                 RegValue = 0x00; break;
4739        case HDLC_TXIDLE_MARK:                  RegValue = 0xff; break;
4740        }
4741
4742        write_reg(info, IDL, RegValue);
4743}
4744
4745/* Query the adapter for the state of the V24 status (input) signals.
4746 */
4747static void get_signals(SLMP_INFO *info)
4748{
4749        u16 status = read_reg(info, SR3);
4750        u16 gpstatus = read_status_reg(info);
4751        u16 testbit;
4752
4753        /* clear all serial signals except RTS and DTR */
4754        info->serial_signals &= SerialSignal_RTS | SerialSignal_DTR;
4755
4756        /* set serial signal bits to reflect MISR */
4757
4758        if (!(status & BIT3))
4759                info->serial_signals |= SerialSignal_CTS;
4760
4761        if ( !(status & BIT2))
4762                info->serial_signals |= SerialSignal_DCD;
4763
4764        testbit = BIT1 << (info->port_num * 2); // Port 0..3 RI is GPDATA<1,3,5,7>
4765        if (!(gpstatus & testbit))
4766                info->serial_signals |= SerialSignal_RI;
4767
4768        testbit = BIT0 << (info->port_num * 2); // Port 0..3 DSR is GPDATA<0,2,4,6>
4769        if (!(gpstatus & testbit))
4770                info->serial_signals |= SerialSignal_DSR;
4771}
4772
4773/* Set the state of RTS and DTR based on contents of
4774 * serial_signals member of device context.
4775 */
4776static void set_signals(SLMP_INFO *info)
4777{
4778        unsigned char RegValue;
4779        u16 EnableBit;
4780
4781        RegValue = read_reg(info, CTL);
4782        if (info->serial_signals & SerialSignal_RTS)
4783                RegValue &= ~BIT0;
4784        else
4785                RegValue |= BIT0;
4786        write_reg(info, CTL, RegValue);
4787
4788        // Port 0..3 DTR is ctrl reg <1,3,5,7>
4789        EnableBit = BIT1 << (info->port_num*2);
4790        if (info->serial_signals & SerialSignal_DTR)
4791                info->port_array[0]->ctrlreg_value &= ~EnableBit;
4792        else
4793                info->port_array[0]->ctrlreg_value |= EnableBit;
4794        write_control_reg(info);
4795}
4796
4797/*******************/
4798/* DMA Buffer Code */
4799/*******************/
4800
4801/* Set the count for all receive buffers to SCABUFSIZE
4802 * and set the current buffer to the first buffer. This effectively
4803 * makes all buffers free and discards any data in buffers.
4804 */
4805static void rx_reset_buffers(SLMP_INFO *info)
4806{
4807        rx_free_frame_buffers(info, 0, info->rx_buf_count - 1);
4808}
4809
4810/* Free the buffers used by a received frame
4811 *
4812 * info   pointer to device instance data
4813 * first  index of 1st receive buffer of frame
4814 * last   index of last receive buffer of frame
4815 */
4816static void rx_free_frame_buffers(SLMP_INFO *info, unsigned int first, unsigned int last)
4817{
4818        bool done = false;
4819
4820        while(!done) {
4821                /* reset current buffer for reuse */
4822                info->rx_buf_list[first].status = 0xff;
4823
4824                if (first == last) {
4825                        done = true;
4826                        /* set new last rx descriptor address */
4827                        write_reg16(info, RXDMA + EDA, info->rx_buf_list_ex[first].phys_entry);
4828                }
4829
4830                first++;
4831                if (first == info->rx_buf_count)
4832                        first = 0;
4833        }
4834
4835        /* set current buffer to next buffer after last buffer of frame */
4836        info->current_rx_buf = first;
4837}
4838
4839/* Return a received frame from the receive DMA buffers.
4840 * Only frames received without errors are returned.
4841 *
4842 * Return Value:        true if frame returned, otherwise false
4843 */
4844static bool rx_get_frame(SLMP_INFO *info)
4845{
4846        unsigned int StartIndex, EndIndex;      /* index of 1st and last buffers of Rx frame */
4847        unsigned short status;
4848        unsigned int framesize = 0;
4849        bool ReturnCode = false;
4850        unsigned long flags;
4851        struct tty_struct *tty = info->port.tty;
4852        unsigned char addr_field = 0xff;
4853        SCADESC *desc;
4854        SCADESC_EX *desc_ex;
4855
4856CheckAgain:
4857        /* assume no frame returned, set zero length */
4858        framesize = 0;
4859        addr_field = 0xff;
4860
4861        /*
4862         * current_rx_buf points to the 1st buffer of the next available
4863         * receive frame. To find the last buffer of the frame look for
4864         * a non-zero status field in the buffer entries. (The status
4865         * field is set by the 16C32 after completing a receive frame.
4866         */
4867        StartIndex = EndIndex = info->current_rx_buf;
4868
4869        for ( ;; ) {
4870                desc = &info->rx_buf_list[EndIndex];
4871                desc_ex = &info->rx_buf_list_ex[EndIndex];
4872
4873                if (desc->status == 0xff)
4874                        goto Cleanup;   /* current desc still in use, no frames available */
4875
4876                if (framesize == 0 && info->params.addr_filter != 0xff)
4877                        addr_field = desc_ex->virt_addr[0];
4878
4879                framesize += desc->length;
4880
4881                /* Status != 0 means last buffer of frame */
4882                if (desc->status)
4883                        break;
4884
4885                EndIndex++;
4886                if (EndIndex == info->rx_buf_count)
4887                        EndIndex = 0;
4888
4889                if (EndIndex == info->current_rx_buf) {
4890                        /* all buffers have been 'used' but none mark      */
4891                        /* the end of a frame. Reset buffers and receiver. */
4892                        if ( info->rx_enabled ){
4893                                spin_lock_irqsave(&info->lock,flags);
4894                                rx_start(info);
4895                                spin_unlock_irqrestore(&info->lock,flags);
4896                        }
4897                        goto Cleanup;
4898                }
4899
4900        }
4901
4902        /* check status of receive frame */
4903
4904        /* frame status is byte stored after frame data
4905         *
4906         * 7 EOM (end of msg), 1 = last buffer of frame
4907         * 6 Short Frame, 1 = short frame
4908         * 5 Abort, 1 = frame aborted
4909         * 4 Residue, 1 = last byte is partial
4910         * 3 Overrun, 1 = overrun occurred during frame reception
4911         * 2 CRC,     1 = CRC error detected
4912         *
4913         */
4914        status = desc->status;
4915
4916        /* ignore CRC bit if not using CRC (bit is undefined) */
4917        /* Note:CRC is not save to data buffer */
4918        if (info->params.crc_type == HDLC_CRC_NONE)
4919                status &= ~BIT2;
4920
4921        if (framesize == 0 ||
4922                 (addr_field != 0xff && addr_field != info->params.addr_filter)) {
4923                /* discard 0 byte frames, this seems to occur sometime
4924                 * when remote is idling flags.
4925                 */
4926                rx_free_frame_buffers(info, StartIndex, EndIndex);
4927                goto CheckAgain;
4928        }
4929
4930        if (framesize < 2)
4931                status |= BIT6;
4932
4933        if (status & (BIT6+BIT5+BIT3+BIT2)) {
4934                /* received frame has errors,
4935                 * update counts and mark frame size as 0
4936                 */
4937                if (status & BIT6)
4938                        info->icount.rxshort++;
4939                else if (status & BIT5)
4940                        info->icount.rxabort++;
4941                else if (status & BIT3)
4942                        info->icount.rxover++;
4943                else
4944                        info->icount.rxcrc++;
4945
4946                framesize = 0;
4947#if SYNCLINK_GENERIC_HDLC
4948                {
4949                        info->netdev->stats.rx_errors++;
4950                        info->netdev->stats.rx_frame_errors++;
4951                }
4952#endif
4953        }
4954
4955        if ( debug_level >= DEBUG_LEVEL_BH )
4956                printk("%s(%d):%s rx_get_frame() status=%04X size=%d\n",
4957                        __FILE__,__LINE__,info->device_name,status,framesize);
4958
4959        if ( debug_level >= DEBUG_LEVEL_DATA )
4960                trace_block(info,info->rx_buf_list_ex[StartIndex].virt_addr,
4961                        min_t(unsigned int, framesize, SCABUFSIZE), 0);
4962
4963        if (framesize) {
4964                if (framesize > info->max_frame_size)
4965                        info->icount.rxlong++;
4966                else {
4967                        /* copy dma buffer(s) to contiguous intermediate buffer */
4968                        int copy_count = framesize;
4969                        int index = StartIndex;
4970                        unsigned char *ptmp = info->tmp_rx_buf;
4971                        info->tmp_rx_buf_count = framesize;
4972
4973                        info->icount.rxok++;
4974
4975                        while(copy_count) {
4976                                int partial_count = min(copy_count,SCABUFSIZE);
4977                                memcpy( ptmp,
4978                                        info->rx_buf_list_ex[index].virt_addr,
4979                                        partial_count );
4980                                ptmp += partial_count;
4981                                copy_count -= partial_count;
4982
4983                                if ( ++index == info->rx_buf_count )
4984                                        index = 0;
4985                        }
4986
4987#if SYNCLINK_GENERIC_HDLC
4988                        if (info->netcount)
4989                                hdlcdev_rx(info,info->tmp_rx_buf,framesize);
4990                        else
4991#endif
4992                                ldisc_receive_buf(tty,info->tmp_rx_buf,
4993                                                  info->flag_buf, framesize);
4994                }
4995        }
4996        /* Free the buffers used by this frame. */
4997        rx_free_frame_buffers( info, StartIndex, EndIndex );
4998
4999        ReturnCode = true;
5000
5001Cleanup:
5002        if ( info->rx_enabled && info->rx_overflow ) {
5003                /* Receiver is enabled, but needs to restarted due to
5004                 * rx buffer overflow. If buffers are empty, restart receiver.
5005                 */
5006                if (info->rx_buf_list[EndIndex].status == 0xff) {
5007                        spin_lock_irqsave(&info->lock,flags);
5008                        rx_start(info);
5009                        spin_unlock_irqrestore(&info->lock,flags);
5010                }
5011        }
5012
5013        return ReturnCode;
5014}
5015
5016/* load the transmit DMA buffer with data
5017 */
5018static void tx_load_dma_buffer(SLMP_INFO *info, const char *buf, unsigned int count)
5019{
5020        unsigned short copy_count;
5021        unsigned int i = 0;
5022        SCADESC *desc;
5023        SCADESC_EX *desc_ex;
5024
5025        if ( debug_level >= DEBUG_LEVEL_DATA )
5026                trace_block(info, buf, min_t(unsigned int, count, SCABUFSIZE), 1);
5027
5028        /* Copy source buffer to one or more DMA buffers, starting with
5029         * the first transmit dma buffer.
5030         */
5031        for(i=0;;)
5032        {
5033                copy_count = min_t(unsigned int, count, SCABUFSIZE);
5034
5035                desc = &info->tx_buf_list[i];
5036                desc_ex = &info->tx_buf_list_ex[i];
5037
5038                load_pci_memory(info, desc_ex->virt_addr,buf,copy_count);
5039
5040                desc->length = copy_count;
5041                desc->status = 0;
5042
5043                buf += copy_count;
5044                count -= copy_count;
5045
5046                if (!count)
5047                        break;
5048
5049                i++;
5050                if (i >= info->tx_buf_count)
5051                        i = 0;
5052        }
5053
5054        info->tx_buf_list[i].status = 0x81;     /* set EOM and EOT status */
5055        info->last_tx_buf = ++i;
5056}
5057
5058static bool register_test(SLMP_INFO *info)
5059{
5060        static unsigned char testval[] = {0x00, 0xff, 0xaa, 0x55, 0x69, 0x96};
5061        static unsigned int count = ARRAY_SIZE(testval);
5062        unsigned int i;
5063        bool rc = true;
5064        unsigned long flags;
5065
5066        spin_lock_irqsave(&info->lock,flags);
5067        reset_port(info);
5068
5069        /* assume failure */
5070        info->init_error = DiagStatus_AddressFailure;
5071
5072        /* Write bit patterns to various registers but do it out of */
5073        /* sync, then read back and verify values. */
5074
5075        for (i = 0 ; i < count ; i++) {
5076                write_reg(info, TMC, testval[i]);
5077                write_reg(info, IDL, testval[(i+1)%count]);
5078                write_reg(info, SA0, testval[(i+2)%count]);
5079                write_reg(info, SA1, testval[(i+3)%count]);
5080
5081                if ( (read_reg(info, TMC) != testval[i]) ||
5082                          (read_reg(info, IDL) != testval[(i+1)%count]) ||
5083                          (read_reg(info, SA0) != testval[(i+2)%count]) ||
5084                          (read_reg(info, SA1) != testval[(i+3)%count]) )
5085                {
5086                        rc = false;
5087                        break;
5088                }
5089        }
5090
5091        reset_port(info);
5092        spin_unlock_irqrestore(&info->lock,flags);
5093
5094        return rc;
5095}
5096
5097static bool irq_test(SLMP_INFO *info)
5098{
5099        unsigned long timeout;
5100        unsigned long flags;
5101
5102        unsigned char timer = (info->port_num & 1) ? TIMER2 : TIMER0;
5103
5104        spin_lock_irqsave(&info->lock,flags);
5105        reset_port(info);
5106
5107        /* assume failure */
5108        info->init_error = DiagStatus_IrqFailure;
5109        info->irq_occurred = false;
5110
5111        /* setup timer0 on SCA0 to interrupt */
5112
5113        /* IER2<7..4> = timer<3..0> interrupt enables (1=enabled) */
5114        write_reg(info, IER2, (unsigned char)((info->port_num & 1) ? BIT6 : BIT4));
5115
5116        write_reg(info, (unsigned char)(timer + TEPR), 0);      /* timer expand prescale */
5117        write_reg16(info, (unsigned char)(timer + TCONR), 1);   /* timer constant */
5118
5119
5120        /* TMCS, Timer Control/Status Register
5121         *
5122         * 07      CMF, Compare match flag (read only) 1=match
5123         * 06      ECMI, CMF Interrupt Enable: 1=enabled
5124         * 05      Reserved, must be 0
5125         * 04      TME, Timer Enable
5126         * 03..00  Reserved, must be 0
5127         *
5128         * 0101 0000
5129         */
5130        write_reg(info, (unsigned char)(timer + TMCS), 0x50);
5131
5132        spin_unlock_irqrestore(&info->lock,flags);
5133
5134        timeout=100;
5135        while( timeout-- && !info->irq_occurred ) {
5136                msleep_interruptible(10);
5137        }
5138
5139        spin_lock_irqsave(&info->lock,flags);
5140        reset_port(info);
5141        spin_unlock_irqrestore(&info->lock,flags);
5142
5143        return info->irq_occurred;
5144}
5145
5146/* initialize individual SCA device (2 ports)
5147 */
5148static bool sca_init(SLMP_INFO *info)
5149{
5150        /* set wait controller to single mem partition (low), no wait states */
5151        write_reg(info, PABR0, 0);      /* wait controller addr boundary 0 */
5152        write_reg(info, PABR1, 0);      /* wait controller addr boundary 1 */
5153        write_reg(info, WCRL, 0);       /* wait controller low range */
5154        write_reg(info, WCRM, 0);       /* wait controller mid range */
5155        write_reg(info, WCRH, 0);       /* wait controller high range */
5156
5157        /* DPCR, DMA Priority Control
5158         *
5159         * 07..05  Not used, must be 0
5160         * 04      BRC, bus release condition: 0=all transfers complete
5161         * 03      CCC, channel change condition: 0=every cycle
5162         * 02..00  PR<2..0>, priority 100=round robin
5163         *
5164         * 00000100 = 0x04
5165         */
5166        write_reg(info, DPCR, dma_priority);
5167
5168        /* DMA Master Enable, BIT7: 1=enable all channels */
5169        write_reg(info, DMER, 0x80);
5170
5171        /* enable all interrupt classes */
5172        write_reg(info, IER0, 0xff);    /* TxRDY,RxRDY,TxINT,RxINT (ports 0-1) */
5173        write_reg(info, IER1, 0xff);    /* DMIB,DMIA (channels 0-3) */
5174        write_reg(info, IER2, 0xf0);    /* TIRQ (timers 0-3) */
5175
5176        /* ITCR, interrupt control register
5177         * 07      IPC, interrupt priority, 0=MSCI->DMA
5178         * 06..05  IAK<1..0>, Acknowledge cycle, 00=non-ack cycle
5179         * 04      VOS, Vector Output, 0=unmodified vector
5180         * 03..00  Reserved, must be 0
5181         */
5182        write_reg(info, ITCR, 0);
5183
5184        return true;
5185}
5186
5187/* initialize adapter hardware
5188 */
5189static bool init_adapter(SLMP_INFO *info)
5190{
5191        int i;
5192
5193        /* Set BIT30 of Local Control Reg 0x50 to reset SCA */
5194        volatile u32 *MiscCtrl = (u32 *)(info->lcr_base + 0x50);
5195        u32 readval;
5196
5197        info->misc_ctrl_value |= BIT30;
5198        *MiscCtrl = info->misc_ctrl_value;
5199
5200        /*
5201         * Force at least 170ns delay before clearing
5202         * reset bit. Each read from LCR takes at least
5203         * 30ns so 10 times for 300ns to be safe.
5204         */
5205        for(i=0;i<10;i++)
5206                readval = *MiscCtrl;
5207
5208        info->misc_ctrl_value &= ~BIT30;
5209        *MiscCtrl = info->misc_ctrl_value;
5210
5211        /* init control reg (all DTRs off, all clksel=input) */
5212        info->ctrlreg_value = 0xaa;
5213        write_control_reg(info);
5214
5215        {
5216                volatile u32 *LCR1BRDR = (u32 *)(info->lcr_base + 0x2c);
5217                lcr1_brdr_value &= ~(BIT5 + BIT4 + BIT3);
5218
5219                switch(read_ahead_count)
5220                {
5221                case 16:
5222                        lcr1_brdr_value |= BIT5 + BIT4 + BIT3;
5223                        break;
5224                case 8:
5225                        lcr1_brdr_value |= BIT5 + BIT4;
5226                        break;
5227                case 4:
5228                        lcr1_brdr_value |= BIT5 + BIT3;
5229                        break;
5230                case 0:
5231                        lcr1_brdr_value |= BIT5;
5232                        break;
5233                }
5234
5235                *LCR1BRDR = lcr1_brdr_value;
5236                *MiscCtrl = misc_ctrl_value;
5237        }
5238
5239        sca_init(info->port_array[0]);
5240        sca_init(info->port_array[2]);
5241
5242        return true;
5243}
5244
5245/* Loopback an HDLC frame to test the hardware
5246 * interrupt and DMA functions.
5247 */
5248static bool loopback_test(SLMP_INFO *info)
5249{
5250#define TESTFRAMESIZE 20
5251
5252        unsigned long timeout;
5253        u16 count = TESTFRAMESIZE;
5254        unsigned char buf[TESTFRAMESIZE];
5255        bool rc = false;
5256        unsigned long flags;
5257
5258        struct tty_struct *oldtty = info->port.tty;
5259        u32 speed = info->params.clock_speed;
5260
5261        info->params.clock_speed = 3686400;
5262        info->port.tty = NULL;
5263
5264        /* assume failure */
5265        info->init_error = DiagStatus_DmaFailure;
5266
5267        /* build and send transmit frame */
5268        for (count = 0; count < TESTFRAMESIZE;++count)
5269                buf[count] = (unsigned char)count;
5270
5271        memset(info->tmp_rx_buf,0,TESTFRAMESIZE);
5272
5273        /* program hardware for HDLC and enabled receiver */
5274        spin_lock_irqsave(&info->lock,flags);
5275        hdlc_mode(info);
5276        enable_loopback(info,1);
5277        rx_start(info);
5278        info->tx_count = count;
5279        tx_load_dma_buffer(info,buf,count);
5280        tx_start(info);
5281        spin_unlock_irqrestore(&info->lock,flags);
5282
5283        /* wait for receive complete */
5284        /* Set a timeout for waiting for interrupt. */
5285        for ( timeout = 100; timeout; --timeout ) {
5286                msleep_interruptible(10);
5287
5288                if (rx_get_frame(info)) {
5289                        rc = true;
5290                        break;
5291                }
5292        }
5293
5294        /* verify received frame length and contents */
5295        if (rc &&
5296            ( info->tmp_rx_buf_count != count ||
5297              memcmp(buf, info->tmp_rx_buf,count))) {
5298                rc = false;
5299        }
5300
5301        spin_lock_irqsave(&info->lock,flags);
5302        reset_adapter(info);
5303        spin_unlock_irqrestore(&info->lock,flags);
5304
5305        info->params.clock_speed = speed;
5306        info->port.tty = oldtty;
5307
5308        return rc;
5309}
5310
5311/* Perform diagnostics on hardware
5312 */
5313static int adapter_test( SLMP_INFO *info )
5314{
5315        unsigned long flags;
5316        if ( debug_level >= DEBUG_LEVEL_INFO )
5317                printk( "%s(%d):Testing device %s\n",
5318                        __FILE__,__LINE__,info->device_name );
5319
5320        spin_lock_irqsave(&info->lock,flags);
5321        init_adapter(info);
5322        spin_unlock_irqrestore(&info->lock,flags);
5323
5324        info->port_array[0]->port_count = 0;
5325
5326        if ( register_test(info->port_array[0]) &&
5327                register_test(info->port_array[1])) {
5328
5329                info->port_array[0]->port_count = 2;
5330
5331                if ( register_test(info->port_array[2]) &&
5332                        register_test(info->port_array[3]) )
5333                        info->port_array[0]->port_count += 2;
5334        }
5335        else {
5336                printk( "%s(%d):Register test failure for device %s Addr=%08lX\n",
5337                        __FILE__,__LINE__,info->device_name, (unsigned long)(info->phys_sca_base));
5338                return -ENODEV;
5339        }
5340
5341        if ( !irq_test(info->port_array[0]) ||
5342                !irq_test(info->port_array[1]) ||
5343                 (info->port_count == 4 && !irq_test(info->port_array[2])) ||
5344                 (info->port_count == 4 && !irq_test(info->port_array[3]))) {
5345                printk( "%s(%d):Interrupt test failure for device %s IRQ=%d\n",
5346                        __FILE__,__LINE__,info->device_name, (unsigned short)(info->irq_level) );
5347                return -ENODEV;
5348        }
5349
5350        if (!loopback_test(info->port_array[0]) ||
5351                !loopback_test(info->port_array[1]) ||
5352                 (info->port_count == 4 && !loopback_test(info->port_array[2])) ||
5353                 (info->port_count == 4 && !loopback_test(info->port_array[3]))) {
5354                printk( "%s(%d):DMA test failure for device %s\n",
5355                        __FILE__,__LINE__,info->device_name);
5356                return -ENODEV;
5357        }
5358
5359        if ( debug_level >= DEBUG_LEVEL_INFO )
5360                printk( "%s(%d):device %s passed diagnostics\n",
5361                        __FILE__,__LINE__,info->device_name );
5362
5363        info->port_array[0]->init_error = 0;
5364        info->port_array[1]->init_error = 0;
5365        if ( info->port_count > 2 ) {
5366                info->port_array[2]->init_error = 0;
5367                info->port_array[3]->init_error = 0;
5368        }
5369
5370        return 0;
5371}
5372
5373/* Test the shared memory on a PCI adapter.
5374 */
5375static bool memory_test(SLMP_INFO *info)
5376{
5377        static unsigned long testval[] = { 0x0, 0x55555555, 0xaaaaaaaa,
5378                0x66666666, 0x99999999, 0xffffffff, 0x12345678 };
5379        unsigned long count = ARRAY_SIZE(testval);
5380        unsigned long i;
5381        unsigned long limit = SCA_MEM_SIZE/sizeof(unsigned long);
5382        unsigned long * addr = (unsigned long *)info->memory_base;
5383
5384        /* Test data lines with test pattern at one location. */
5385
5386        for ( i = 0 ; i < count ; i++ ) {
5387                *addr = testval[i];
5388                if ( *addr != testval[i] )
5389                        return false;
5390        }
5391
5392        /* Test address lines with incrementing pattern over */
5393        /* entire address range. */
5394
5395        for ( i = 0 ; i < limit ; i++ ) {
5396                *addr = i * 4;
5397                addr++;
5398        }
5399
5400        addr = (unsigned long *)info->memory_base;
5401
5402        for ( i = 0 ; i < limit ; i++ ) {
5403                if ( *addr != i * 4 )
5404                        return false;
5405                addr++;
5406        }
5407
5408        memset( info->memory_base, 0, SCA_MEM_SIZE );
5409        return true;
5410}
5411
5412/* Load data into PCI adapter shared memory.
5413 *
5414 * The PCI9050 releases control of the local bus
5415 * after completing the current read or write operation.
5416 *
5417 * While the PCI9050 write FIFO not empty, the
5418 * PCI9050 treats all of the writes as a single transaction
5419 * and does not release the bus. This causes DMA latency problems
5420 * at high speeds when copying large data blocks to the shared memory.
5421 *
5422 * This function breaks a write into multiple transations by
5423 * interleaving a read which flushes the write FIFO and 'completes'
5424 * the write transation. This allows any pending DMA request to gain control
5425 * of the local bus in a timely fasion.
5426 */
5427static void load_pci_memory(SLMP_INFO *info, char* dest, const char* src, unsigned short count)
5428{
5429        /* A load interval of 16 allows for 4 32-bit writes at */
5430        /* 136ns each for a maximum latency of 542ns on the local bus.*/
5431
5432        unsigned short interval = count / sca_pci_load_interval;
5433        unsigned short i;
5434
5435        for ( i = 0 ; i < interval ; i++ )
5436        {
5437                memcpy(dest, src, sca_pci_load_interval);
5438                read_status_reg(info);
5439                dest += sca_pci_load_interval;
5440                src += sca_pci_load_interval;
5441        }
5442
5443        memcpy(dest, src, count % sca_pci_load_interval);
5444}
5445
5446static void trace_block(SLMP_INFO *info,const char* data, int count, int xmit)
5447{
5448        int i;
5449        int linecount;
5450        if (xmit)
5451                printk("%s tx data:\n",info->device_name);
5452        else
5453                printk("%s rx data:\n",info->device_name);
5454
5455        while(count) {
5456                if (count > 16)
5457                        linecount = 16;
5458                else
5459                        linecount = count;
5460
5461                for(i=0;i<linecount;i++)
5462                        printk("%02X ",(unsigned char)data[i]);
5463                for(;i<17;i++)
5464                        printk("   ");
5465                for(i=0;i<linecount;i++) {
5466                        if (data[i]>=040 && data[i]<=0176)
5467                                printk("%c",data[i]);
5468                        else
5469                                printk(".");
5470                }
5471                printk("\n");
5472
5473                data  += linecount;
5474                count -= linecount;
5475        }
5476}       /* end of trace_block() */
5477
5478/* called when HDLC frame times out
5479 * update stats and do tx completion processing
5480 */
5481static void tx_timeout(unsigned long context)
5482{
5483        SLMP_INFO *info = (SLMP_INFO*)context;
5484        unsigned long flags;
5485
5486        if ( debug_level >= DEBUG_LEVEL_INFO )
5487                printk( "%s(%d):%s tx_timeout()\n",
5488                        __FILE__,__LINE__,info->device_name);
5489        if(info->tx_active && info->params.mode == MGSL_MODE_HDLC) {
5490                info->icount.txtimeout++;
5491        }
5492        spin_lock_irqsave(&info->lock,flags);
5493        info->tx_active = false;
5494        info->tx_count = info->tx_put = info->tx_get = 0;
5495
5496        spin_unlock_irqrestore(&info->lock,flags);
5497
5498#if SYNCLINK_GENERIC_HDLC
5499        if (info->netcount)
5500                hdlcdev_tx_done(info);
5501        else
5502#endif
5503                bh_transmit(info);
5504}
5505
5506/* called to periodically check the DSR/RI modem signal input status
5507 */
5508static void status_timeout(unsigned long context)
5509{
5510        u16 status = 0;
5511        SLMP_INFO *info = (SLMP_INFO*)context;
5512        unsigned long flags;
5513        unsigned char delta;
5514
5515
5516        spin_lock_irqsave(&info->lock,flags);
5517        get_signals(info);
5518        spin_unlock_irqrestore(&info->lock,flags);
5519
5520        /* check for DSR/RI state change */
5521
5522        delta = info->old_signals ^ info->serial_signals;
5523        info->old_signals = info->serial_signals;
5524
5525        if (delta & SerialSignal_DSR)
5526                status |= MISCSTATUS_DSR_LATCHED|(info->serial_signals&SerialSignal_DSR);
5527
5528        if (delta & SerialSignal_RI)
5529                status |= MISCSTATUS_RI_LATCHED|(info->serial_signals&SerialSignal_RI);
5530
5531        if (delta & SerialSignal_DCD)
5532                status |= MISCSTATUS_DCD_LATCHED|(info->serial_signals&SerialSignal_DCD);
5533
5534        if (delta & SerialSignal_CTS)
5535                status |= MISCSTATUS_CTS_LATCHED|(info->serial_signals&SerialSignal_CTS);
5536
5537        if (status)
5538                isr_io_pin(info,status);
5539
5540        mod_timer(&info->status_timer, jiffies + msecs_to_jiffies(10));
5541}
5542
5543
5544/* Register Access Routines -
5545 * All registers are memory mapped
5546 */
5547#define CALC_REGADDR() \
5548        unsigned char * RegAddr = (unsigned char*)(info->sca_base + Addr); \
5549        if (info->port_num > 1) \
5550                RegAddr += 256;                 /* port 0-1 SCA0, 2-3 SCA1 */ \
5551        if ( info->port_num & 1) { \
5552                if (Addr > 0x7f) \
5553                        RegAddr += 0x40;        /* DMA access */ \
5554                else if (Addr > 0x1f && Addr < 0x60) \
5555                        RegAddr += 0x20;        /* MSCI access */ \
5556        }
5557
5558
5559static unsigned char read_reg(SLMP_INFO * info, unsigned char Addr)
5560{
5561        CALC_REGADDR();
5562        return *RegAddr;
5563}
5564static void write_reg(SLMP_INFO * info, unsigned char Addr, unsigned char Value)
5565{
5566        CALC_REGADDR();
5567        *RegAddr = Value;
5568}
5569
5570static u16 read_reg16(SLMP_INFO * info, unsigned char Addr)
5571{
5572        CALC_REGADDR();
5573        return *((u16 *)RegAddr);
5574}
5575
5576static void write_reg16(SLMP_INFO * info, unsigned char Addr, u16 Value)
5577{
5578        CALC_REGADDR();
5579        *((u16 *)RegAddr) = Value;
5580}
5581
5582static unsigned char read_status_reg(SLMP_INFO * info)
5583{
5584        unsigned char *RegAddr = (unsigned char *)info->statctrl_base;
5585        return *RegAddr;
5586}
5587
5588static void write_control_reg(SLMP_INFO * info)
5589{
5590        unsigned char *RegAddr = (unsigned char *)info->statctrl_base;
5591        *RegAddr = info->port_array[0]->ctrlreg_value;
5592}
5593
5594
5595static int synclinkmp_init_one (struct pci_dev *dev,
5596                                          const struct pci_device_id *ent)
5597{
5598        if (pci_enable_device(dev)) {
5599                printk("error enabling pci device %p\n", dev);
5600                return -EIO;
5601        }
5602        device_init( ++synclinkmp_adapter_count, dev );
5603        return 0;
5604}
5605
5606static void synclinkmp_remove_one (struct pci_dev *dev)
5607{
5608}
5609