1/* 2 * xHCI host controller driver 3 * 4 * Copyright (C) 2008 Intel Corp. 5 * 6 * Author: Sarah Sharp 7 * Some code borrowed from the Linux EHCI driver. 8 * 9 * This program is free software; you can redistribute it and/or modify 10 * it under the terms of the GNU General Public License version 2 as 11 * published by the Free Software Foundation. 12 * 13 * This program is distributed in the hope that it will be useful, but 14 * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY 15 * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License 16 * for more details. 17 * 18 * You should have received a copy of the GNU General Public License 19 * along with this program; if not, write to the Free Software Foundation, 20 * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 21 */ 22/* Up to 16 ms to halt an HC */ 23#define XHCI_MAX_HALT_USEC (16*1000) 24/* HC not running - set to 1 when run/stop bit is cleared. */ 25#define XHCI_STS_HALT (1<<0) 26 27/* HCCPARAMS offset from PCI base address */ 28#define XHCI_HCC_PARAMS_OFFSET 0x10 29/* HCCPARAMS contains the first extended capability pointer */ 30#define XHCI_HCC_EXT_CAPS(p) (((p)>>16)&0xffff) 31 32/* Command and Status registers offset from the Operational Registers address */ 33#define XHCI_CMD_OFFSET 0x00 34#define XHCI_STS_OFFSET 0x04 35 36#define XHCI_MAX_EXT_CAPS 50 37 38/* Capability Register */ 39/* bits 7:0 - how long is the Capabilities register */ 40#define XHCI_HC_LENGTH(p) (((p)>>00)&0x00ff) 41 42/* Extended capability register fields */ 43#define XHCI_EXT_CAPS_ID(p) (((p)>>0)&0xff) 44#define XHCI_EXT_CAPS_NEXT(p) (((p)>>8)&0xff) 45#define XHCI_EXT_CAPS_VAL(p) ((p)>>16) 46/* Extended capability IDs - ID 0 reserved */ 47#define XHCI_EXT_CAPS_LEGACY 1 48#define XHCI_EXT_CAPS_PROTOCOL 2 49#define XHCI_EXT_CAPS_PM 3 50#define XHCI_EXT_CAPS_VIRT 4 51#define XHCI_EXT_CAPS_ROUTE 5 52/* IDs 6-9 reserved */ 53#define XHCI_EXT_CAPS_DEBUG 10 54/* USB Legacy Support Capability - section 7.1.1 */ 55#define XHCI_HC_BIOS_OWNED (1 << 16) 56#define XHCI_HC_OS_OWNED (1 << 24) 57 58/* USB Legacy Support Capability - section 7.1.1 */ 59/* Add this offset, plus the value of xECP in HCCPARAMS to the base address */ 60#define XHCI_LEGACY_SUPPORT_OFFSET (0x00) 61 62/* USB Legacy Support Control and Status Register - section 7.1.2 */ 63/* Add this offset, plus the value of xECP in HCCPARAMS to the base address */ 64#define XHCI_LEGACY_CONTROL_OFFSET (0x04) 65/* bits 1:3, 5:12, and 17:19 need to be preserved; bits 21:28 should be zero */ 66#define XHCI_LEGACY_DISABLE_SMI ((0x7 << 1) + (0xff << 5) + (0x7 << 17)) 67#define XHCI_LEGACY_SMI_EVENTS (0x7 << 29) 68 69/* USB 2.0 xHCI 0.96 L1C capability - section 7.2.2.1.3.2 */ 70#define XHCI_L1C (1 << 16) 71 72/* USB 2.0 xHCI 1.0 hardware LMP capability - section 7.2.2.1.3.2 */ 73#define XHCI_HLC (1 << 19) 74#define XHCI_BLC (1 << 19) 75 76/* command register values to disable interrupts and halt the HC */ 77/* start/stop HC execution - do not write unless HC is halted*/ 78#define XHCI_CMD_RUN (1 << 0) 79/* Event Interrupt Enable - get irq when EINT bit is set in USBSTS register */ 80#define XHCI_CMD_EIE (1 << 2) 81/* Host System Error Interrupt Enable - get irq when HSEIE bit set in USBSTS */ 82#define XHCI_CMD_HSEIE (1 << 3) 83/* Enable Wrap Event - '1' means xHC generates an event when MFINDEX wraps. */ 84#define XHCI_CMD_EWE (1 << 10) 85 86#define XHCI_IRQS (XHCI_CMD_EIE | XHCI_CMD_HSEIE | XHCI_CMD_EWE) 87 88/* true: Controller Not Ready to accept doorbell or op reg writes after reset */ 89#define XHCI_STS_CNR (1 << 11) 90 91#include <linux/io.h> 92 93/** 94 * Return the next extended capability pointer register. 95 * 96 * @base PCI register base address. 97 * 98 * @ext_offset Offset of the 32-bit register that contains the extended 99 * capabilites pointer. If searching for the first extended capability, pass 100 * in XHCI_HCC_PARAMS_OFFSET. If searching for the next extended capability, 101 * pass in the offset of the current extended capability register. 102 * 103 * Returns 0 if there is no next extended capability register or returns the register offset 104 * from the PCI registers base address. 105 */ 106static inline int xhci_find_next_cap_offset(void __iomem *base, int ext_offset) 107{ 108 u32 next; 109 110 next = readl(base + ext_offset); 111 112 if (ext_offset == XHCI_HCC_PARAMS_OFFSET) { 113 /* Find the first extended capability */ 114 next = XHCI_HCC_EXT_CAPS(next); 115 ext_offset = 0; 116 } else { 117 /* Find the next extended capability */ 118 next = XHCI_EXT_CAPS_NEXT(next); 119 } 120 121 if (!next) 122 return 0; 123 /* 124 * Address calculation from offset of extended capabilities 125 * (or HCCPARAMS) register - see section 5.3.6 and section 7. 126 */ 127 return ext_offset + (next << 2); 128} 129 130/** 131 * Find the offset of the extended capabilities with capability ID id. 132 * 133 * @base PCI MMIO registers base address. 134 * @ext_offset Offset from base of the first extended capability to look at, 135 * or the address of HCCPARAMS. 136 * @id Extended capability ID to search for. 137 * 138 * This uses an arbitrary limit of XHCI_MAX_EXT_CAPS extended capabilities 139 * to make sure that the list doesn't contain a loop. 140 */ 141static inline int xhci_find_ext_cap_by_id(void __iomem *base, int ext_offset, int id) 142{ 143 u32 val; 144 int limit = XHCI_MAX_EXT_CAPS; 145 146 while (ext_offset && limit > 0) { 147 val = readl(base + ext_offset); 148 if (XHCI_EXT_CAPS_ID(val) == id) 149 break; 150 ext_offset = xhci_find_next_cap_offset(base, ext_offset); 151 limit--; 152 } 153 if (limit > 0) 154 return ext_offset; 155 return 0; 156} 157