/*
 * Support for the Maxtor OneTouch USB hard drive's button
 *
 * Current development and maintenance by:
 *      Copyright (c) 2005 Nick Sillik <n.sillik@temple.edu>
 *
 * Initial work by:
 *      Copyright (c) 2003 Erik Thyren <erth7411@student.uu.se>
 *
 * Based on usbmouse.c (Vojtech Pavlik) and xpad.c (Marko Friedemann)
 *
 */

/*
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
 *
 */

#include <linux/kernel.h>
#include <linux/input.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/usb/input.h>
#include "usb.h"
#include "debug.h"

MODULE_DESCRIPTION("Maxtor USB OneTouch hard drive button driver");
MODULE_AUTHOR("Nick Sillik <n.sillik@temple.edu>");
MODULE_LICENSE("GPL");

#define ONETOUCH_PKT_LEN        0x02
#define ONETOUCH_BUTTON         KEY_PROG1

static int onetouch_connect_input(struct us_data *ss);
static void onetouch_release_input(void *onetouch_);

struct usb_onetouch {
        char name[128];
        char phys[64];
        struct input_dev *dev;  /* input device interface */
        struct usb_device *udev;        /* usb device */

        struct urb *irq;        /* urb for interrupt in report */
        unsigned char *data;    /* input data */
        dma_addr_t data_dma;
        unsigned int is_open:1;
};


/*
 * The table of devices
 */
#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
                    vendorName, productName, useProtocol, useTransport, \
                    initFunction, flags) \
{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
  .driver_info = (flags) }

static struct usb_device_id onetouch_usb_ids[] = {
#       include "unusual_onetouch.h"
        { }             /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, onetouch_usb_ids);

#undef UNUSUAL_DEV

/*
 * The flags table
 */
#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
                    vendor_name, product_name, use_protocol, use_transport, \
                    init_function, Flags) \
{ \
        .vendorName = vendor_name,      \
        .productName = product_name,    \
        .useProtocol = use_protocol,    \
        .useTransport = use_transport,  \
        .initFunction = init_function,  \
}

static struct us_unusual_dev onetouch_unusual_dev_list[] = {
#       include "unusual_onetouch.h"
        { }             /* Terminating entry */
};

#undef UNUSUAL_DEV


static void usb_onetouch_irq(struct urb *urb)
{
        struct usb_onetouch *onetouch = urb->context;
        signed char *data = onetouch->data;
        struct input_dev *dev = onetouch->dev;
        int status = urb->status;
        int retval;

        switch (status) {
        case 0:                 /* success */
                break;
        case -ECONNRESET:       /* unlink */
        case -ENOENT:
        case -ESHUTDOWN:
                return;
        /* -EPIPE:  should clear the halt */
        default:                /* error */
                goto resubmit;
        }

        input_report_key(dev, ONETOUCH_BUTTON, data[0] & 0x02);
        input_sync(dev);

resubmit:
        retval = usb_submit_urb (urb, GFP_ATOMIC);
        if (retval)
                dev_err(&dev->dev, "can't resubmit intr, %s-%s/input0, "
                        "retval %d\n", onetouch->udev->bus->bus_name,
                        onetouch->udev->devpath, retval);
}

static int usb_onetouch_open(struct input_dev *dev)
{
        struct usb_onetouch *onetouch = input_get_drvdata(dev);

        onetouch->is_open = 1;
        onetouch->irq->dev = onetouch->udev;
        if (usb_submit_urb(onetouch->irq, GFP_KERNEL)) {
                dev_err(&dev->dev, "usb_submit_urb failed\n");
                return -EIO;
        }

        return 0;
}

static void usb_onetouch_close(struct input_dev *dev)
{
        struct usb_onetouch *onetouch = input_get_drvdata(dev);

        usb_kill_urb(onetouch->irq);
        onetouch->is_open = 0;
}

#ifdef CONFIG_PM
static void usb_onetouch_pm_hook(struct us_data *us, int action)
{
        struct usb_onetouch *onetouch = (struct usb_onetouch *) us->extra;

        if (onetouch->is_open) {
                switch (action) {
                case US_SUSPEND:
                        usb_kill_urb(onetouch->irq);
                        break;
                case US_RESUME:
                        if (usb_submit_urb(onetouch->irq, GFP_NOIO) != 0)
                                dev_err(&onetouch->irq->dev->dev,
                                        "usb_submit_urb failed\n");
                        break;
                default:
                        break;
                }
        }
}
#endif /* CONFIG_PM */

static int onetouch_connect_input(struct us_data *ss)
{
        struct usb_device *udev = ss->pusb_dev;
        struct usb_host_interface *interface;
        struct usb_endpoint_descriptor *endpoint;
        struct usb_onetouch *onetouch;
        struct input_dev *input_dev;
        int pipe, maxp;
        int error = -ENOMEM;

        interface = ss->pusb_intf->cur_altsetting;

        if (interface->desc.bNumEndpoints != 3)
                return -ENODEV;

        endpoint = &interface->endpoint[2].desc;
        if (!usb_endpoint_is_int_in(endpoint))
                return -ENODEV;

        pipe = usb_rcvintpipe(udev, endpoint->bEndpointAddress);
        maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
        maxp = min(maxp, ONETOUCH_PKT_LEN);

        onetouch = kzalloc(sizeof(struct usb_onetouch), GFP_KERNEL);
        input_dev = input_allocate_device();
        if (!onetouch || !input_dev)
                goto fail1;

        onetouch->data = usb_alloc_coherent(udev, ONETOUCH_PKT_LEN,
                                            GFP_KERNEL, &onetouch->data_dma);
        if (!onetouch->data)
                goto fail1;

        onetouch->irq = usb_alloc_urb(0, GFP_KERNEL);
        if (!onetouch->irq)
                goto fail2;

        onetouch->udev = udev;
        onetouch->dev = input_dev;

        if (udev->manufacturer)
                strlcpy(onetouch->name, udev->manufacturer,
                        sizeof(onetouch->name));
        if (udev->product) {
                if (udev->manufacturer)
                        strlcat(onetouch->name, " ", sizeof(onetouch->name));
                strlcat(onetouch->name, udev->product, sizeof(onetouch->name));
        }

        if (!strlen(onetouch->name))
                snprintf(onetouch->name, sizeof(onetouch->name),
                         "Maxtor Onetouch %04x:%04x",
                         le16_to_cpu(udev->descriptor.idVendor),
                         le16_to_cpu(udev->descriptor.idProduct));

        usb_make_path(udev, onetouch->phys, sizeof(onetouch->phys));
        strlcat(onetouch->phys, "/input0", sizeof(onetouch->phys));

        input_dev->name = onetouch->name;
        input_dev->phys = onetouch->phys;
        usb_to_input_id(udev, &input_dev->id);
        input_dev->dev.parent = &udev->dev;

        set_bit(EV_KEY, input_dev->evbit);
        set_bit(ONETOUCH_BUTTON, input_dev->keybit);
        clear_bit(0, input_dev->keybit);

        input_set_drvdata(input_dev, onetouch);

        input_dev->open = usb_onetouch_open;
        input_dev->close = usb_onetouch_close;

        usb_fill_int_urb(onetouch->irq, udev, pipe, onetouch->data, maxp,
                         usb_onetouch_irq, onetouch, endpoint->bInterval);
        onetouch->irq->transfer_dma = onetouch->data_dma;
        onetouch->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;

        ss->extra_destructor = onetouch_release_input;
        ss->extra = onetouch;
#ifdef CONFIG_PM
        ss->suspend_resume_hook = usb_onetouch_pm_hook;
#endif

        error = input_register_device(onetouch->dev);
        if (error)
                goto fail3;

        return 0;

 fail3: usb_free_urb(onetouch->irq);
 fail2: usb_free_coherent(udev, ONETOUCH_PKT_LEN,
                          onetouch->data, onetouch->data_dma);
 fail1: kfree(onetouch);
        input_free_device(input_dev);
        return error;
}

static void onetouch_release_input(void *onetouch_)
{
        struct usb_onetouch *onetouch = (struct usb_onetouch *) onetouch_;

        if (onetouch) {
                usb_kill_urb(onetouch->irq);
                input_unregister_device(onetouch->dev);
                usb_free_urb(onetouch->irq);
                usb_free_coherent(onetouch->udev, ONETOUCH_PKT_LEN,
                                  onetouch->data, onetouch->data_dma);
        }
}

static int onetouch_probe(struct usb_interface *intf,
                         const struct usb_device_id *id)
{
        struct us_data *us;
        int result;

        result = usb_stor_probe1(&us, intf, id,
                        (id - onetouch_usb_ids) + onetouch_unusual_dev_list);
        if (result)
                return result;

        /* Use default transport and protocol */

        result = usb_stor_probe2(us);
        return result;
}

static struct usb_driver onetouch_driver = {
        .name =         "ums-onetouch",
        .probe =        onetouch_probe,
        .disconnect =   usb_stor_disconnect,
        .suspend =      usb_stor_suspend,
        .resume =       usb_stor_resume,
        .reset_resume = usb_stor_reset_resume,
        .pre_reset =    usb_stor_pre_reset,
        .post_reset =   usb_stor_post_reset,
        .id_table =     onetouch_usb_ids,
        .soft_unbind =  1,
        .no_dynamic_id = 1,
};

module_usb_driver(onetouch_driver);