linux/include/linux/regulator/max8973-regulator.h
<<
>>
Prefs
   1/*
   2 * max8973-regulator.h -- MAXIM 8973 regulator
   3 *
   4 * Interface for regulator driver for MAXIM 8973 DC-DC step-down
   5 * switching regulator.
   6 *
   7 * Copyright (C) 2012 NVIDIA Corporation
   8
   9 * Author: Laxman Dewangan <ldewangan@nvidia.com>
  10 *
  11 * This program is free software; you can redistribute it and/or modify
  12 * it under the terms of the GNU General Public License as published by
  13 * the Free Software Foundation; either version 2 of the License, or
  14 * (at your option) any later version.
  15 *
  16 * This program is distributed in the hope that it will be useful, but WITHOUT
  17 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  18 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  19 * more details.
  20 *
  21 * You should have received a copy of the GNU General Public License along
  22 * with this program; if not, write to the Free Software Foundation, Inc.,
  23 * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  24 *
  25 */
  26
  27#ifndef __LINUX_REGULATOR_MAX8973_H
  28#define __LINUX_REGULATOR_MAX8973_H
  29
  30/*
  31 * Control flags for configuration of the device.
  32 * Client need to pass this information with ORed
  33 */
  34#define MAX8973_CONTROL_REMOTE_SENSE_ENABLE                     0x00000001
  35#define MAX8973_CONTROL_FALLING_SLEW_RATE_ENABLE                0x00000002
  36#define MAX8973_CONTROL_OUTPUT_ACTIVE_DISCH_ENABLE              0x00000004
  37#define MAX8973_CONTROL_BIAS_ENABLE                             0x00000008
  38#define MAX8973_CONTROL_PULL_DOWN_ENABLE                        0x00000010
  39#define MAX8973_CONTROL_FREQ_SHIFT_9PER_ENABLE                  0x00000020
  40
  41#define MAX8973_CONTROL_CLKADV_TRIP_DISABLED                    0x00000000
  42#define MAX8973_CONTROL_CLKADV_TRIP_75mV_PER_US                 0x00010000
  43#define MAX8973_CONTROL_CLKADV_TRIP_150mV_PER_US                0x00020000
  44#define MAX8973_CONTROL_CLKADV_TRIP_75mV_PER_US_HIST_DIS        0x00030000
  45
  46#define MAX8973_CONTROL_INDUCTOR_VALUE_NOMINAL                  0x00000000
  47#define MAX8973_CONTROL_INDUCTOR_VALUE_MINUS_30_PER             0x00100000
  48#define MAX8973_CONTROL_INDUCTOR_VALUE_PLUS_30_PER              0x00200000
  49#define MAX8973_CONTROL_INDUCTOR_VALUE_PLUS_60_PER              0x00300000
  50
  51/*
  52 * struct max8973_regulator_platform_data - max8973 regulator platform data.
  53 *
  54 * @reg_init_data: The regulator init data.
  55 * @control_flags: Control flags which are ORed value of above flags to
  56 *              configure device.
  57 * @enable_ext_control: Enable the voltage enable/disable through external
  58 *              control signal from EN input pin. If it is false then
  59 *              voltage output will be enabled/disabled through EN bit of
  60 *              device register.
  61 * @dvs_gpio: GPIO for dvs. It should be -1 if this is tied with fixed logic.
  62 * @dvs_def_state: Default state of dvs. 1 if it is high else 0.
  63 */
  64struct max8973_regulator_platform_data {
  65        struct regulator_init_data *reg_init_data;
  66        unsigned long control_flags;
  67        bool enable_ext_control;
  68        int dvs_gpio;
  69        unsigned dvs_def_state:1;
  70};
  71
  72#endif /* __LINUX_REGULATOR_MAX8973_H */
  73