linux/include/uapi/linux/fs.h
<<
>>
Prefs
   1#ifndef _UAPI_LINUX_FS_H
   2#define _UAPI_LINUX_FS_H
   3
   4/*
   5 * This file has definitions for some important file table
   6 * structures etc.
   7 */
   8
   9#include <linux/limits.h>
  10#include <linux/ioctl.h>
  11#include <linux/types.h>
  12
  13/*
  14 * It's silly to have NR_OPEN bigger than NR_FILE, but you can change
  15 * the file limit at runtime and only root can increase the per-process
  16 * nr_file rlimit, so it's safe to set up a ridiculously high absolute
  17 * upper limit on files-per-process.
  18 *
  19 * Some programs (notably those using select()) may have to be 
  20 * recompiled to take full advantage of the new limits..  
  21 */
  22
  23/* Fixed constants first: */
  24#undef NR_OPEN
  25#define INR_OPEN_CUR 1024       /* Initial setting for nfile rlimits */
  26#define INR_OPEN_MAX 4096       /* Hard limit for nfile rlimits */
  27
  28#define BLOCK_SIZE_BITS 10
  29#define BLOCK_SIZE (1<<BLOCK_SIZE_BITS)
  30
  31#define SEEK_SET        0       /* seek relative to beginning of file */
  32#define SEEK_CUR        1       /* seek relative to current file position */
  33#define SEEK_END        2       /* seek relative to end of file */
  34#define SEEK_DATA       3       /* seek to the next data */
  35#define SEEK_HOLE       4       /* seek to the next hole */
  36#define SEEK_MAX        SEEK_HOLE
  37
  38struct fstrim_range {
  39        __u64 start;
  40        __u64 len;
  41        __u64 minlen;
  42};
  43
  44/* And dynamically-tunable limits and defaults: */
  45struct files_stat_struct {
  46        unsigned long nr_files;         /* read only */
  47        unsigned long nr_free_files;    /* read only */
  48        unsigned long max_files;                /* tunable */
  49};
  50
  51struct inodes_stat_t {
  52        int nr_inodes;
  53        int nr_unused;
  54        int dummy[5];           /* padding for sysctl ABI compatibility */
  55};
  56
  57
  58#define NR_FILE  8192   /* this can well be larger on a larger system */
  59
  60
  61/*
  62 * These are the fs-independent mount-flags: up to 32 flags are supported
  63 */
  64#define MS_RDONLY        1      /* Mount read-only */
  65#define MS_NOSUID        2      /* Ignore suid and sgid bits */
  66#define MS_NODEV         4      /* Disallow access to device special files */
  67#define MS_NOEXEC        8      /* Disallow program execution */
  68#define MS_SYNCHRONOUS  16      /* Writes are synced at once */
  69#define MS_REMOUNT      32      /* Alter flags of a mounted FS */
  70#define MS_MANDLOCK     64      /* Allow mandatory locks on an FS */
  71#define MS_DIRSYNC      128     /* Directory modifications are synchronous */
  72#define MS_NOATIME      1024    /* Do not update access times. */
  73#define MS_NODIRATIME   2048    /* Do not update directory access times */
  74#define MS_BIND         4096
  75#define MS_MOVE         8192
  76#define MS_REC          16384
  77#define MS_VERBOSE      32768   /* War is peace. Verbosity is silence.
  78                                   MS_VERBOSE is deprecated. */
  79#define MS_SILENT       32768
  80#define MS_POSIXACL     (1<<16) /* VFS does not apply the umask */
  81#define MS_UNBINDABLE   (1<<17) /* change to unbindable */
  82#define MS_PRIVATE      (1<<18) /* change to private */
  83#define MS_SLAVE        (1<<19) /* change to slave */
  84#define MS_SHARED       (1<<20) /* change to shared */
  85#define MS_RELATIME     (1<<21) /* Update atime relative to mtime/ctime. */
  86#define MS_KERNMOUNT    (1<<22) /* this is a kern_mount call */
  87#define MS_I_VERSION    (1<<23) /* Update inode I_version field */
  88#define MS_STRICTATIME  (1<<24) /* Always perform atime updates */
  89
  90/* These sb flags are internal to the kernel */
  91#define MS_NOSEC        (1<<28)
  92#define MS_BORN         (1<<29)
  93#define MS_ACTIVE       (1<<30)
  94#define MS_NOUSER       (1<<31)
  95
  96/*
  97 * Superblock flags that can be altered by MS_REMOUNT
  98 */
  99#define MS_RMT_MASK     (MS_RDONLY|MS_SYNCHRONOUS|MS_MANDLOCK|MS_I_VERSION)
 100
 101/*
 102 * Old magic mount flag and mask
 103 */
 104#define MS_MGC_VAL 0xC0ED0000
 105#define MS_MGC_MSK 0xffff0000
 106
 107/* the read-only stuff doesn't really belong here, but any other place is
 108   probably as bad and I don't want to create yet another include file. */
 109
 110#define BLKROSET   _IO(0x12,93) /* set device read-only (0 = read-write) */
 111#define BLKROGET   _IO(0x12,94) /* get read-only status (0 = read_write) */
 112#define BLKRRPART  _IO(0x12,95) /* re-read partition table */
 113#define BLKGETSIZE _IO(0x12,96) /* return device size /512 (long *arg) */
 114#define BLKFLSBUF  _IO(0x12,97) /* flush buffer cache */
 115#define BLKRASET   _IO(0x12,98) /* set read ahead for block device */
 116#define BLKRAGET   _IO(0x12,99) /* get current read ahead setting */
 117#define BLKFRASET  _IO(0x12,100)/* set filesystem (mm/filemap.c) read-ahead */
 118#define BLKFRAGET  _IO(0x12,101)/* get filesystem (mm/filemap.c) read-ahead */
 119#define BLKSECTSET _IO(0x12,102)/* set max sectors per request (ll_rw_blk.c) */
 120#define BLKSECTGET _IO(0x12,103)/* get max sectors per request (ll_rw_blk.c) */
 121#define BLKSSZGET  _IO(0x12,104)/* get block device sector size */
 122#if 0
 123#define BLKPG      _IO(0x12,105)/* See blkpg.h */
 124
 125/* Some people are morons.  Do not use sizeof! */
 126
 127#define BLKELVGET  _IOR(0x12,106,size_t)/* elevator get */
 128#define BLKELVSET  _IOW(0x12,107,size_t)/* elevator set */
 129/* This was here just to show that the number is taken -
 130   probably all these _IO(0x12,*) ioctls should be moved to blkpg.h. */
 131#endif
 132/* A jump here: 108-111 have been used for various private purposes. */
 133#define BLKBSZGET  _IOR(0x12,112,size_t)
 134#define BLKBSZSET  _IOW(0x12,113,size_t)
 135#define BLKGETSIZE64 _IOR(0x12,114,size_t)      /* return device size in bytes (u64 *arg) */
 136#define BLKTRACESETUP _IOWR(0x12,115,struct blk_user_trace_setup)
 137#define BLKTRACESTART _IO(0x12,116)
 138#define BLKTRACESTOP _IO(0x12,117)
 139#define BLKTRACETEARDOWN _IO(0x12,118)
 140#define BLKDISCARD _IO(0x12,119)
 141#define BLKIOMIN _IO(0x12,120)
 142#define BLKIOOPT _IO(0x12,121)
 143#define BLKALIGNOFF _IO(0x12,122)
 144#define BLKPBSZGET _IO(0x12,123)
 145#define BLKDISCARDZEROES _IO(0x12,124)
 146#define BLKSECDISCARD _IO(0x12,125)
 147#define BLKROTATIONAL _IO(0x12,126)
 148#define BLKZEROOUT _IO(0x12,127)
 149
 150#define BMAP_IOCTL 1            /* obsolete - kept for compatibility */
 151#define FIBMAP     _IO(0x00,1)  /* bmap access */
 152#define FIGETBSZ   _IO(0x00,2)  /* get the block size used for bmap */
 153#define FIFREEZE        _IOWR('X', 119, int)    /* Freeze */
 154#define FITHAW          _IOWR('X', 120, int)    /* Thaw */
 155#define FITRIM          _IOWR('X', 121, struct fstrim_range)    /* Trim */
 156
 157#define FS_IOC_GETFLAGS                 _IOR('f', 1, long)
 158#define FS_IOC_SETFLAGS                 _IOW('f', 2, long)
 159#define FS_IOC_GETVERSION               _IOR('v', 1, long)
 160#define FS_IOC_SETVERSION               _IOW('v', 2, long)
 161#define FS_IOC_FIEMAP                   _IOWR('f', 11, struct fiemap)
 162#define FS_IOC32_GETFLAGS               _IOR('f', 1, int)
 163#define FS_IOC32_SETFLAGS               _IOW('f', 2, int)
 164#define FS_IOC32_GETVERSION             _IOR('v', 1, int)
 165#define FS_IOC32_SETVERSION             _IOW('v', 2, int)
 166
 167/*
 168 * Inode flags (FS_IOC_GETFLAGS / FS_IOC_SETFLAGS)
 169 */
 170#define FS_SECRM_FL                     0x00000001 /* Secure deletion */
 171#define FS_UNRM_FL                      0x00000002 /* Undelete */
 172#define FS_COMPR_FL                     0x00000004 /* Compress file */
 173#define FS_SYNC_FL                      0x00000008 /* Synchronous updates */
 174#define FS_IMMUTABLE_FL                 0x00000010 /* Immutable file */
 175#define FS_APPEND_FL                    0x00000020 /* writes to file may only append */
 176#define FS_NODUMP_FL                    0x00000040 /* do not dump file */
 177#define FS_NOATIME_FL                   0x00000080 /* do not update atime */
 178/* Reserved for compression usage... */
 179#define FS_DIRTY_FL                     0x00000100
 180#define FS_COMPRBLK_FL                  0x00000200 /* One or more compressed clusters */
 181#define FS_NOCOMP_FL                    0x00000400 /* Don't compress */
 182#define FS_ECOMPR_FL                    0x00000800 /* Compression error */
 183/* End compression flags --- maybe not all used */
 184#define FS_BTREE_FL                     0x00001000 /* btree format dir */
 185#define FS_INDEX_FL                     0x00001000 /* hash-indexed directory */
 186#define FS_IMAGIC_FL                    0x00002000 /* AFS directory */
 187#define FS_JOURNAL_DATA_FL              0x00004000 /* Reserved for ext3 */
 188#define FS_NOTAIL_FL                    0x00008000 /* file tail should not be merged */
 189#define FS_DIRSYNC_FL                   0x00010000 /* dirsync behaviour (directories only) */
 190#define FS_TOPDIR_FL                    0x00020000 /* Top of directory hierarchies*/
 191#define FS_EXTENT_FL                    0x00080000 /* Extents */
 192#define FS_DIRECTIO_FL                  0x00100000 /* Use direct i/o */
 193#define FS_NOCOW_FL                     0x00800000 /* Do not cow file */
 194#define FS_RESERVED_FL                  0x80000000 /* reserved for ext2 lib */
 195
 196#define FS_FL_USER_VISIBLE              0x0003DFFF /* User visible flags */
 197#define FS_FL_USER_MODIFIABLE           0x000380FF /* User modifiable flags */
 198
 199
 200#define SYNC_FILE_RANGE_WAIT_BEFORE     1
 201#define SYNC_FILE_RANGE_WRITE           2
 202#define SYNC_FILE_RANGE_WAIT_AFTER      4
 203
 204#endif /* _UAPI_LINUX_FS_H */
 205