1config SND_BF5XX_I2S 2 tristate "SoC I2S Audio for the ADI Blackfin chip" 3 depends on BLACKFIN 4 select SND_BF5XX_SOC_SPORT if !BF60x 5 select SND_BF6XX_SOC_SPORT if BF60x 6 help 7 Say Y or M if you want to add support for codecs attached to 8 the Blackfin SPORT (synchronous serial ports) interface in I2S 9 mode (supports single stereo In/Out). 10 You will also need to select the audio interfaces to support below. 11 12config SND_BF5XX_SOC_SSM2602 13 tristate "SoC SSM2602 Audio Codec Add-On Card support" 14 depends on SND_BF5XX_I2S && (SPI_MASTER || I2C) 15 select SND_BF5XX_SOC_I2S if !BF60x 16 select SND_BF6XX_SOC_I2S if BF60x 17 select SND_SOC_SSM2602 18 help 19 Say Y if you want to add support for the Analog Devices 20 SSM2602 Audio Codec Add-On Card. 21 22config SND_SOC_BFIN_EVAL_ADAU1701 23 tristate "Support for the EVAL-ADAU1701MINIZ board on Blackfin eval boards" 24 depends on SND_BF5XX_I2S 25 select SND_BF5XX_SOC_I2S 26 select SND_SOC_ADAU1701 27 select I2C 28 help 29 Say Y if you want to add support for the Analog Devices EVAL-ADAU1701MINIZ 30 board connected to one of the Blackfin evaluation boards like the 31 BF5XX-STAMP or BF5XX-EZKIT. 32 33config SND_SOC_BFIN_EVAL_ADAU1373 34 tristate "Support for the EVAL-ADAU1373 board on Blackfin eval boards" 35 depends on SND_BF5XX_I2S && I2C 36 select SND_BF5XX_SOC_I2S 37 select SND_SOC_ADAU1373 38 help 39 Say Y if you want to add support for the Analog Devices EVAL-ADAU1373 40 board connected to one of the Blackfin evaluation boards like the 41 BF5XX-STAMP or BF5XX-EZKIT. 42 43 Note: This driver assumes that first ADAU1373 DAI is connected to the 44 first SPORT port on the BF5XX board. 45 46config SND_SOC_BFIN_EVAL_ADAV80X 47 tristate "Support for the EVAL-ADAV80X boards on Blackfin eval boards" 48 depends on SND_BF5XX_I2S && (SPI_MASTER || I2C) 49 select SND_BF5XX_SOC_I2S 50 select SND_SOC_ADAV80X 51 help 52 Say Y if you want to add support for the Analog Devices EVAL-ADAV801 or 53 EVAL-ADAV803 board connected to one of the Blackfin evaluation boards 54 like the BF5XX-STAMP or BF5XX-EZKIT. 55 56 Note: This driver assumes that the ADAV80X digital record and playback 57 interfaces are connected to the first SPORT port on the BF5XX board. 58 59config SND_BF5XX_SOC_AD1836 60 tristate "SoC AD1836 Audio support for BF5xx" 61 depends on SND_BF5XX_I2S 62 select SND_BF5XX_SOC_I2S 63 select SND_SOC_AD1836 64 help 65 Say Y if you want to add support for SoC audio on BF5xx STAMP/EZKIT. 66 67config SND_BF5XX_SOC_AD193X 68 tristate "SoC AD193X Audio support for Blackfin" 69 depends on SND_BF5XX_I2S 70 select SND_BF5XX_SOC_I2S 71 select SND_SOC_AD193X 72 help 73 Say Y if you want to add support for AD193X codec on Blackfin. 74 This driver supports AD1936, AD1937, AD1938 and AD1939. 75 76config SND_BF5XX_SOC_AD73311 77 tristate "SoC AD73311 Audio support for Blackfin" 78 depends on SND_BF5XX_I2S 79 select SND_BF5XX_SOC_I2S 80 select SND_SOC_AD73311 81 help 82 Say Y if you want to add support for AD73311 codec on Blackfin. 83 84config SND_BFIN_AD73311_SE 85 int "PF pin for AD73311L Chip Select" 86 depends on SND_BF5XX_SOC_AD73311 87 default 4 88 help 89 Enter the GPIO used to control AD73311's SE pin. Acceptable 90 values are 0 to 7 91 92config SND_BF5XX_AC97 93 tristate "SoC AC97 Audio for the ADI BF5xx chip" 94 depends on BLACKFIN 95 select AC97_BUS 96 select SND_SOC_AC97_BUS 97 select SND_BF5XX_SOC_SPORT 98 select SND_BF5XX_SOC_AC97 99 help 100 Say Y or M if you want to add support for codecs attached to 101 the Blackfin SPORT (synchronous serial ports) interface in slot 16 102 mode (pseudo AC97 interface). 103 You will also need to select the audio interfaces to support below. 104 105 Note: 106 AC97 codecs which do not implement the slot-16 mode will not function 107 properly with this driver. This driver is known to work with the 108 Analog Devices line of AC97 codecs. 109 110config SND_BF5XX_MMAP_SUPPORT 111 bool "Enable MMAP Support" 112 depends on SND_BF5XX_AC97 113 default y 114 help 115 Say y if you want AC97 driver to support mmap mode. 116 We introduce an intermediate buffer to simulate mmap. 117 118config SND_BF5XX_MULTICHAN_SUPPORT 119 bool "Enable Multichannel Support" 120 depends on SND_BF5XX_AC97 121 default n 122 help 123 Say y if you want AC97 driver to support up to 5.1 channel audio. 124 this mode will consume much more memory for DMA. 125 126config SND_BF5XX_HAVE_COLD_RESET 127 bool "BOARD has COLD Reset GPIO" 128 depends on SND_BF5XX_AC97 129 default y if BFIN548_EZKIT 130 default n if !BFIN548_EZKIT 131 132config SND_BF5XX_RESET_GPIO_NUM 133 int "Set a GPIO for cold reset" 134 depends on SND_BF5XX_HAVE_COLD_RESET 135 range 0 159 136 default 19 if BFIN548_EZKIT 137 default 5 if BFIN537_STAMP 138 default 0 139 help 140 Set the correct GPIO for RESET the sound chip. 141 142config SND_BF5XX_SOC_AD1980 143 tristate "SoC AD1980/1 Audio support for BF5xx (Obsolete)" 144 depends on SND_BF5XX_AC97 145 select SND_BF5XX_SOC_AC97 146 select SND_SOC_AD1980 147 help 148 Say Y if you want to add support for SoC audio on BF5xx STAMP/EZKIT. 149 150 Warning: 151 Because Analog Devices Inc. discontinued the ad1980 sound chip since 152 Sep. 2009, this ad1980 driver is not maintained, tested and supported 153 by ADI now. 154 155config SND_BF5XX_SOC_SPORT 156 tristate 157 158config SND_BF6XX_SOC_SPORT 159 tristate 160 161config SND_BF5XX_SOC_I2S 162 tristate 163 164config SND_BF6XX_SOC_I2S 165 tristate 166 167config SND_BF5XX_SOC_AC97 168 tristate 169 170config SND_BF5XX_SPORT_NUM 171 int "Set a SPORT for Sound chip" 172 depends on (SND_BF5XX_SOC_SPORT || SND_BF6XX_SOC_SPORT) 173 range 0 3 if BF54x 174 range 0 1 if !BF54x 175 default 0 176 help 177 Set the correct SPORT for sound chip. 178