linux/sound/soc/codecs/wm8960.c
<<
>>
Prefs
   1/*
   2 * wm8960.c  --  WM8960 ALSA SoC Audio driver
   3 *
   4 * Copyright 2007-11 Wolfson Microelectronics, plc
   5 *
   6 * Author: Liam Girdwood
   7 *
   8 * This program is free software; you can redistribute it and/or modify
   9 * it under the terms of the GNU General Public License version 2 as
  10 * published by the Free Software Foundation.
  11 */
  12
  13#include <linux/module.h>
  14#include <linux/moduleparam.h>
  15#include <linux/init.h>
  16#include <linux/delay.h>
  17#include <linux/pm.h>
  18#include <linux/i2c.h>
  19#include <linux/slab.h>
  20#include <sound/core.h>
  21#include <sound/pcm.h>
  22#include <sound/pcm_params.h>
  23#include <sound/soc.h>
  24#include <sound/initval.h>
  25#include <sound/tlv.h>
  26#include <sound/wm8960.h>
  27
  28#include "wm8960.h"
  29
  30/* R25 - Power 1 */
  31#define WM8960_VMID_MASK 0x180
  32#define WM8960_VREF      0x40
  33
  34/* R26 - Power 2 */
  35#define WM8960_PWR2_LOUT1       0x40
  36#define WM8960_PWR2_ROUT1       0x20
  37#define WM8960_PWR2_OUT3        0x02
  38
  39/* R28 - Anti-pop 1 */
  40#define WM8960_POBCTRL   0x80
  41#define WM8960_BUFDCOPEN 0x10
  42#define WM8960_BUFIOEN   0x08
  43#define WM8960_SOFT_ST   0x04
  44#define WM8960_HPSTBY    0x01
  45
  46/* R29 - Anti-pop 2 */
  47#define WM8960_DISOP     0x40
  48#define WM8960_DRES_MASK 0x30
  49
  50/*
  51 * wm8960 register cache
  52 * We can't read the WM8960 register space when we are
  53 * using 2 wire for device control, so we cache them instead.
  54 */
  55static const struct reg_default wm8960_reg_defaults[] = {
  56        {  0x0, 0x00a7 },
  57        {  0x1, 0x00a7 },
  58        {  0x2, 0x0000 },
  59        {  0x3, 0x0000 },
  60        {  0x4, 0x0000 },
  61        {  0x5, 0x0008 },
  62        {  0x6, 0x0000 },
  63        {  0x7, 0x000a },
  64        {  0x8, 0x01c0 },
  65        {  0x9, 0x0000 },
  66        {  0xa, 0x00ff },
  67        {  0xb, 0x00ff },
  68
  69        { 0x10, 0x0000 },
  70        { 0x11, 0x007b },
  71        { 0x12, 0x0100 },
  72        { 0x13, 0x0032 },
  73        { 0x14, 0x0000 },
  74        { 0x15, 0x00c3 },
  75        { 0x16, 0x00c3 },
  76        { 0x17, 0x01c0 },
  77        { 0x18, 0x0000 },
  78        { 0x19, 0x0000 },
  79        { 0x1a, 0x0000 },
  80        { 0x1b, 0x0000 },
  81        { 0x1c, 0x0000 },
  82        { 0x1d, 0x0000 },
  83
  84        { 0x20, 0x0100 },
  85        { 0x21, 0x0100 },
  86        { 0x22, 0x0050 },
  87
  88        { 0x25, 0x0050 },
  89        { 0x26, 0x0000 },
  90        { 0x27, 0x0000 },
  91        { 0x28, 0x0000 },
  92        { 0x29, 0x0000 },
  93        { 0x2a, 0x0040 },
  94        { 0x2b, 0x0000 },
  95        { 0x2c, 0x0000 },
  96        { 0x2d, 0x0050 },
  97        { 0x2e, 0x0050 },
  98        { 0x2f, 0x0000 },
  99        { 0x30, 0x0002 },
 100        { 0x31, 0x0037 },
 101
 102        { 0x33, 0x0080 },
 103        { 0x34, 0x0008 },
 104        { 0x35, 0x0031 },
 105        { 0x36, 0x0026 },
 106        { 0x37, 0x00e9 },
 107};
 108
 109static bool wm8960_volatile(struct device *dev, unsigned int reg)
 110{
 111        switch (reg) {
 112        case WM8960_RESET:
 113                return true;
 114        default:
 115                return false;
 116        }
 117}
 118
 119struct wm8960_priv {
 120        struct regmap *regmap;
 121        int (*set_bias_level)(struct snd_soc_codec *,
 122                              enum snd_soc_bias_level level);
 123        struct snd_soc_dapm_widget *lout1;
 124        struct snd_soc_dapm_widget *rout1;
 125        struct snd_soc_dapm_widget *out3;
 126        bool deemph;
 127        int playback_fs;
 128};
 129
 130#define wm8960_reset(c) snd_soc_write(c, WM8960_RESET, 0)
 131
 132/* enumerated controls */
 133static const char *wm8960_polarity[] = {"No Inversion", "Left Inverted",
 134        "Right Inverted", "Stereo Inversion"};
 135static const char *wm8960_3d_upper_cutoff[] = {"High", "Low"};
 136static const char *wm8960_3d_lower_cutoff[] = {"Low", "High"};
 137static const char *wm8960_alcfunc[] = {"Off", "Right", "Left", "Stereo"};
 138static const char *wm8960_alcmode[] = {"ALC", "Limiter"};
 139
 140static const struct soc_enum wm8960_enum[] = {
 141        SOC_ENUM_SINGLE(WM8960_DACCTL1, 5, 4, wm8960_polarity),
 142        SOC_ENUM_SINGLE(WM8960_DACCTL2, 5, 4, wm8960_polarity),
 143        SOC_ENUM_SINGLE(WM8960_3D, 6, 2, wm8960_3d_upper_cutoff),
 144        SOC_ENUM_SINGLE(WM8960_3D, 5, 2, wm8960_3d_lower_cutoff),
 145        SOC_ENUM_SINGLE(WM8960_ALC1, 7, 4, wm8960_alcfunc),
 146        SOC_ENUM_SINGLE(WM8960_ALC3, 8, 2, wm8960_alcmode),
 147};
 148
 149static const int deemph_settings[] = { 0, 32000, 44100, 48000 };
 150
 151static int wm8960_set_deemph(struct snd_soc_codec *codec)
 152{
 153        struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec);
 154        int val, i, best;
 155
 156        /* If we're using deemphasis select the nearest available sample
 157         * rate.
 158         */
 159        if (wm8960->deemph) {
 160                best = 1;
 161                for (i = 2; i < ARRAY_SIZE(deemph_settings); i++) {
 162                        if (abs(deemph_settings[i] - wm8960->playback_fs) <
 163                            abs(deemph_settings[best] - wm8960->playback_fs))
 164                                best = i;
 165                }
 166
 167                val = best << 1;
 168        } else {
 169                val = 0;
 170        }
 171
 172        dev_dbg(codec->dev, "Set deemphasis %d\n", val);
 173
 174        return snd_soc_update_bits(codec, WM8960_DACCTL1,
 175                                   0x6, val);
 176}
 177
 178static int wm8960_get_deemph(struct snd_kcontrol *kcontrol,
 179                             struct snd_ctl_elem_value *ucontrol)
 180{
 181        struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
 182        struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec);
 183
 184        ucontrol->value.enumerated.item[0] = wm8960->deemph;
 185        return 0;
 186}
 187
 188static int wm8960_put_deemph(struct snd_kcontrol *kcontrol,
 189                             struct snd_ctl_elem_value *ucontrol)
 190{
 191        struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
 192        struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec);
 193        int deemph = ucontrol->value.enumerated.item[0];
 194
 195        if (deemph > 1)
 196                return -EINVAL;
 197
 198        wm8960->deemph = deemph;
 199
 200        return wm8960_set_deemph(codec);
 201}
 202
 203static const DECLARE_TLV_DB_SCALE(adc_tlv, -9700, 50, 0);
 204static const DECLARE_TLV_DB_SCALE(dac_tlv, -12700, 50, 1);
 205static const DECLARE_TLV_DB_SCALE(bypass_tlv, -2100, 300, 0);
 206static const DECLARE_TLV_DB_SCALE(out_tlv, -12100, 100, 1);
 207static const DECLARE_TLV_DB_SCALE(boost_tlv, -1200, 300, 1);
 208
 209static const struct snd_kcontrol_new wm8960_snd_controls[] = {
 210SOC_DOUBLE_R_TLV("Capture Volume", WM8960_LINVOL, WM8960_RINVOL,
 211                 0, 63, 0, adc_tlv),
 212SOC_DOUBLE_R("Capture Volume ZC Switch", WM8960_LINVOL, WM8960_RINVOL,
 213        6, 1, 0),
 214SOC_DOUBLE_R("Capture Switch", WM8960_LINVOL, WM8960_RINVOL,
 215        7, 1, 0),
 216
 217SOC_SINGLE_TLV("Right Input Boost Mixer RINPUT3 Volume",
 218               WM8960_INBMIX1, 4, 7, 0, boost_tlv),
 219SOC_SINGLE_TLV("Right Input Boost Mixer RINPUT2 Volume",
 220               WM8960_INBMIX1, 1, 7, 0, boost_tlv),
 221SOC_SINGLE_TLV("Left Input Boost Mixer LINPUT3 Volume",
 222               WM8960_INBMIX2, 4, 7, 0, boost_tlv),
 223SOC_SINGLE_TLV("Left Input Boost Mixer LINPUT2 Volume",
 224               WM8960_INBMIX2, 1, 7, 0, boost_tlv),
 225
 226SOC_DOUBLE_R_TLV("Playback Volume", WM8960_LDAC, WM8960_RDAC,
 227                 0, 255, 0, dac_tlv),
 228
 229SOC_DOUBLE_R_TLV("Headphone Playback Volume", WM8960_LOUT1, WM8960_ROUT1,
 230                 0, 127, 0, out_tlv),
 231SOC_DOUBLE_R("Headphone Playback ZC Switch", WM8960_LOUT1, WM8960_ROUT1,
 232        7, 1, 0),
 233
 234SOC_DOUBLE_R_TLV("Speaker Playback Volume", WM8960_LOUT2, WM8960_ROUT2,
 235                 0, 127, 0, out_tlv),
 236SOC_DOUBLE_R("Speaker Playback ZC Switch", WM8960_LOUT2, WM8960_ROUT2,
 237        7, 1, 0),
 238SOC_SINGLE("Speaker DC Volume", WM8960_CLASSD3, 3, 5, 0),
 239SOC_SINGLE("Speaker AC Volume", WM8960_CLASSD3, 0, 5, 0),
 240
 241SOC_SINGLE("PCM Playback -6dB Switch", WM8960_DACCTL1, 7, 1, 0),
 242SOC_ENUM("ADC Polarity", wm8960_enum[0]),
 243SOC_SINGLE("ADC High Pass Filter Switch", WM8960_DACCTL1, 0, 1, 0),
 244
 245SOC_ENUM("DAC Polarity", wm8960_enum[2]),
 246SOC_SINGLE_BOOL_EXT("DAC Deemphasis Switch", 0,
 247                    wm8960_get_deemph, wm8960_put_deemph),
 248
 249SOC_ENUM("3D Filter Upper Cut-Off", wm8960_enum[2]),
 250SOC_ENUM("3D Filter Lower Cut-Off", wm8960_enum[3]),
 251SOC_SINGLE("3D Volume", WM8960_3D, 1, 15, 0),
 252SOC_SINGLE("3D Switch", WM8960_3D, 0, 1, 0),
 253
 254SOC_ENUM("ALC Function", wm8960_enum[4]),
 255SOC_SINGLE("ALC Max Gain", WM8960_ALC1, 4, 7, 0),
 256SOC_SINGLE("ALC Target", WM8960_ALC1, 0, 15, 1),
 257SOC_SINGLE("ALC Min Gain", WM8960_ALC2, 4, 7, 0),
 258SOC_SINGLE("ALC Hold Time", WM8960_ALC2, 0, 15, 0),
 259SOC_ENUM("ALC Mode", wm8960_enum[5]),
 260SOC_SINGLE("ALC Decay", WM8960_ALC3, 4, 15, 0),
 261SOC_SINGLE("ALC Attack", WM8960_ALC3, 0, 15, 0),
 262
 263SOC_SINGLE("Noise Gate Threshold", WM8960_NOISEG, 3, 31, 0),
 264SOC_SINGLE("Noise Gate Switch", WM8960_NOISEG, 0, 1, 0),
 265
 266SOC_DOUBLE_R("ADC PCM Capture Volume", WM8960_LINPATH, WM8960_RINPATH,
 267        0, 127, 0),
 268
 269SOC_SINGLE_TLV("Left Output Mixer Boost Bypass Volume",
 270               WM8960_BYPASS1, 4, 7, 1, bypass_tlv),
 271SOC_SINGLE_TLV("Left Output Mixer LINPUT3 Volume",
 272               WM8960_LOUTMIX, 4, 7, 1, bypass_tlv),
 273SOC_SINGLE_TLV("Right Output Mixer Boost Bypass Volume",
 274               WM8960_BYPASS2, 4, 7, 1, bypass_tlv),
 275SOC_SINGLE_TLV("Right Output Mixer RINPUT3 Volume",
 276               WM8960_ROUTMIX, 4, 7, 1, bypass_tlv),
 277};
 278
 279static const struct snd_kcontrol_new wm8960_lin_boost[] = {
 280SOC_DAPM_SINGLE("LINPUT2 Switch", WM8960_LINPATH, 6, 1, 0),
 281SOC_DAPM_SINGLE("LINPUT3 Switch", WM8960_LINPATH, 7, 1, 0),
 282SOC_DAPM_SINGLE("LINPUT1 Switch", WM8960_LINPATH, 8, 1, 0),
 283};
 284
 285static const struct snd_kcontrol_new wm8960_lin[] = {
 286SOC_DAPM_SINGLE("Boost Switch", WM8960_LINPATH, 3, 1, 0),
 287};
 288
 289static const struct snd_kcontrol_new wm8960_rin_boost[] = {
 290SOC_DAPM_SINGLE("RINPUT2 Switch", WM8960_RINPATH, 6, 1, 0),
 291SOC_DAPM_SINGLE("RINPUT3 Switch", WM8960_RINPATH, 7, 1, 0),
 292SOC_DAPM_SINGLE("RINPUT1 Switch", WM8960_RINPATH, 8, 1, 0),
 293};
 294
 295static const struct snd_kcontrol_new wm8960_rin[] = {
 296SOC_DAPM_SINGLE("Boost Switch", WM8960_RINPATH, 3, 1, 0),
 297};
 298
 299static const struct snd_kcontrol_new wm8960_loutput_mixer[] = {
 300SOC_DAPM_SINGLE("PCM Playback Switch", WM8960_LOUTMIX, 8, 1, 0),
 301SOC_DAPM_SINGLE("LINPUT3 Switch", WM8960_LOUTMIX, 7, 1, 0),
 302SOC_DAPM_SINGLE("Boost Bypass Switch", WM8960_BYPASS1, 7, 1, 0),
 303};
 304
 305static const struct snd_kcontrol_new wm8960_routput_mixer[] = {
 306SOC_DAPM_SINGLE("PCM Playback Switch", WM8960_ROUTMIX, 8, 1, 0),
 307SOC_DAPM_SINGLE("RINPUT3 Switch", WM8960_ROUTMIX, 7, 1, 0),
 308SOC_DAPM_SINGLE("Boost Bypass Switch", WM8960_BYPASS2, 7, 1, 0),
 309};
 310
 311static const struct snd_kcontrol_new wm8960_mono_out[] = {
 312SOC_DAPM_SINGLE("Left Switch", WM8960_MONOMIX1, 7, 1, 0),
 313SOC_DAPM_SINGLE("Right Switch", WM8960_MONOMIX2, 7, 1, 0),
 314};
 315
 316static const struct snd_soc_dapm_widget wm8960_dapm_widgets[] = {
 317SND_SOC_DAPM_INPUT("LINPUT1"),
 318SND_SOC_DAPM_INPUT("RINPUT1"),
 319SND_SOC_DAPM_INPUT("LINPUT2"),
 320SND_SOC_DAPM_INPUT("RINPUT2"),
 321SND_SOC_DAPM_INPUT("LINPUT3"),
 322SND_SOC_DAPM_INPUT("RINPUT3"),
 323
 324SND_SOC_DAPM_SUPPLY("MICB", WM8960_POWER1, 1, 0, NULL, 0),
 325
 326SND_SOC_DAPM_MIXER("Left Boost Mixer", WM8960_POWER1, 5, 0,
 327                   wm8960_lin_boost, ARRAY_SIZE(wm8960_lin_boost)),
 328SND_SOC_DAPM_MIXER("Right Boost Mixer", WM8960_POWER1, 4, 0,
 329                   wm8960_rin_boost, ARRAY_SIZE(wm8960_rin_boost)),
 330
 331SND_SOC_DAPM_MIXER("Left Input Mixer", WM8960_POWER3, 5, 0,
 332                   wm8960_lin, ARRAY_SIZE(wm8960_lin)),
 333SND_SOC_DAPM_MIXER("Right Input Mixer", WM8960_POWER3, 4, 0,
 334                   wm8960_rin, ARRAY_SIZE(wm8960_rin)),
 335
 336SND_SOC_DAPM_ADC("Left ADC", "Capture", WM8960_POWER1, 3, 0),
 337SND_SOC_DAPM_ADC("Right ADC", "Capture", WM8960_POWER1, 2, 0),
 338
 339SND_SOC_DAPM_DAC("Left DAC", "Playback", WM8960_POWER2, 8, 0),
 340SND_SOC_DAPM_DAC("Right DAC", "Playback", WM8960_POWER2, 7, 0),
 341
 342SND_SOC_DAPM_MIXER("Left Output Mixer", WM8960_POWER3, 3, 0,
 343        &wm8960_loutput_mixer[0],
 344        ARRAY_SIZE(wm8960_loutput_mixer)),
 345SND_SOC_DAPM_MIXER("Right Output Mixer", WM8960_POWER3, 2, 0,
 346        &wm8960_routput_mixer[0],
 347        ARRAY_SIZE(wm8960_routput_mixer)),
 348
 349SND_SOC_DAPM_PGA("LOUT1 PGA", WM8960_POWER2, 6, 0, NULL, 0),
 350SND_SOC_DAPM_PGA("ROUT1 PGA", WM8960_POWER2, 5, 0, NULL, 0),
 351
 352SND_SOC_DAPM_PGA("Left Speaker PGA", WM8960_POWER2, 4, 0, NULL, 0),
 353SND_SOC_DAPM_PGA("Right Speaker PGA", WM8960_POWER2, 3, 0, NULL, 0),
 354
 355SND_SOC_DAPM_PGA("Right Speaker Output", WM8960_CLASSD1, 7, 0, NULL, 0),
 356SND_SOC_DAPM_PGA("Left Speaker Output", WM8960_CLASSD1, 6, 0, NULL, 0),
 357
 358SND_SOC_DAPM_OUTPUT("SPK_LP"),
 359SND_SOC_DAPM_OUTPUT("SPK_LN"),
 360SND_SOC_DAPM_OUTPUT("HP_L"),
 361SND_SOC_DAPM_OUTPUT("HP_R"),
 362SND_SOC_DAPM_OUTPUT("SPK_RP"),
 363SND_SOC_DAPM_OUTPUT("SPK_RN"),
 364SND_SOC_DAPM_OUTPUT("OUT3"),
 365};
 366
 367static const struct snd_soc_dapm_widget wm8960_dapm_widgets_out3[] = {
 368SND_SOC_DAPM_MIXER("Mono Output Mixer", WM8960_POWER2, 1, 0,
 369        &wm8960_mono_out[0],
 370        ARRAY_SIZE(wm8960_mono_out)),
 371};
 372
 373/* Represent OUT3 as a PGA so that it gets turned on with LOUT1/ROUT1 */
 374static const struct snd_soc_dapm_widget wm8960_dapm_widgets_capless[] = {
 375SND_SOC_DAPM_PGA("OUT3 VMID", WM8960_POWER2, 1, 0, NULL, 0),
 376};
 377
 378static const struct snd_soc_dapm_route audio_paths[] = {
 379        { "Left Boost Mixer", "LINPUT1 Switch", "LINPUT1" },
 380        { "Left Boost Mixer", "LINPUT2 Switch", "LINPUT2" },
 381        { "Left Boost Mixer", "LINPUT3 Switch", "LINPUT3" },
 382
 383        { "Left Input Mixer", "Boost Switch", "Left Boost Mixer", },
 384        { "Left Input Mixer", NULL, "LINPUT1", },  /* Really Boost Switch */
 385        { "Left Input Mixer", NULL, "LINPUT2" },
 386        { "Left Input Mixer", NULL, "LINPUT3" },
 387
 388        { "Right Boost Mixer", "RINPUT1 Switch", "RINPUT1" },
 389        { "Right Boost Mixer", "RINPUT2 Switch", "RINPUT2" },
 390        { "Right Boost Mixer", "RINPUT3 Switch", "RINPUT3" },
 391
 392        { "Right Input Mixer", "Boost Switch", "Right Boost Mixer", },
 393        { "Right Input Mixer", NULL, "RINPUT1", },  /* Really Boost Switch */
 394        { "Right Input Mixer", NULL, "RINPUT2" },
 395        { "Right Input Mixer", NULL, "LINPUT3" },
 396
 397        { "Left ADC", NULL, "Left Input Mixer" },
 398        { "Right ADC", NULL, "Right Input Mixer" },
 399
 400        { "Left Output Mixer", "LINPUT3 Switch", "LINPUT3" },
 401        { "Left Output Mixer", "Boost Bypass Switch", "Left Boost Mixer"} ,
 402        { "Left Output Mixer", "PCM Playback Switch", "Left DAC" },
 403
 404        { "Right Output Mixer", "RINPUT3 Switch", "RINPUT3" },
 405        { "Right Output Mixer", "Boost Bypass Switch", "Right Boost Mixer" } ,
 406        { "Right Output Mixer", "PCM Playback Switch", "Right DAC" },
 407
 408        { "LOUT1 PGA", NULL, "Left Output Mixer" },
 409        { "ROUT1 PGA", NULL, "Right Output Mixer" },
 410
 411        { "HP_L", NULL, "LOUT1 PGA" },
 412        { "HP_R", NULL, "ROUT1 PGA" },
 413
 414        { "Left Speaker PGA", NULL, "Left Output Mixer" },
 415        { "Right Speaker PGA", NULL, "Right Output Mixer" },
 416
 417        { "Left Speaker Output", NULL, "Left Speaker PGA" },
 418        { "Right Speaker Output", NULL, "Right Speaker PGA" },
 419
 420        { "SPK_LN", NULL, "Left Speaker Output" },
 421        { "SPK_LP", NULL, "Left Speaker Output" },
 422        { "SPK_RN", NULL, "Right Speaker Output" },
 423        { "SPK_RP", NULL, "Right Speaker Output" },
 424};
 425
 426static const struct snd_soc_dapm_route audio_paths_out3[] = {
 427        { "Mono Output Mixer", "Left Switch", "Left Output Mixer" },
 428        { "Mono Output Mixer", "Right Switch", "Right Output Mixer" },
 429
 430        { "OUT3", NULL, "Mono Output Mixer", }
 431};
 432
 433static const struct snd_soc_dapm_route audio_paths_capless[] = {
 434        { "HP_L", NULL, "OUT3 VMID" },
 435        { "HP_R", NULL, "OUT3 VMID" },
 436
 437        { "OUT3 VMID", NULL, "Left Output Mixer" },
 438        { "OUT3 VMID", NULL, "Right Output Mixer" },
 439};
 440
 441static int wm8960_add_widgets(struct snd_soc_codec *codec)
 442{
 443        struct wm8960_data *pdata = codec->dev->platform_data;
 444        struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec);
 445        struct snd_soc_dapm_context *dapm = &codec->dapm;
 446        struct snd_soc_dapm_widget *w;
 447
 448        snd_soc_dapm_new_controls(dapm, wm8960_dapm_widgets,
 449                                  ARRAY_SIZE(wm8960_dapm_widgets));
 450
 451        snd_soc_dapm_add_routes(dapm, audio_paths, ARRAY_SIZE(audio_paths));
 452
 453        /* In capless mode OUT3 is used to provide VMID for the
 454         * headphone outputs, otherwise it is used as a mono mixer.
 455         */
 456        if (pdata && pdata->capless) {
 457                snd_soc_dapm_new_controls(dapm, wm8960_dapm_widgets_capless,
 458                                          ARRAY_SIZE(wm8960_dapm_widgets_capless));
 459
 460                snd_soc_dapm_add_routes(dapm, audio_paths_capless,
 461                                        ARRAY_SIZE(audio_paths_capless));
 462        } else {
 463                snd_soc_dapm_new_controls(dapm, wm8960_dapm_widgets_out3,
 464                                          ARRAY_SIZE(wm8960_dapm_widgets_out3));
 465
 466                snd_soc_dapm_add_routes(dapm, audio_paths_out3,
 467                                        ARRAY_SIZE(audio_paths_out3));
 468        }
 469
 470        /* We need to power up the headphone output stage out of
 471         * sequence for capless mode.  To save scanning the widget
 472         * list each time to find the desired power state do so now
 473         * and save the result.
 474         */
 475        list_for_each_entry(w, &codec->card->widgets, list) {
 476                if (w->dapm != &codec->dapm)
 477                        continue;
 478                if (strcmp(w->name, "LOUT1 PGA") == 0)
 479                        wm8960->lout1 = w;
 480                if (strcmp(w->name, "ROUT1 PGA") == 0)
 481                        wm8960->rout1 = w;
 482                if (strcmp(w->name, "OUT3 VMID") == 0)
 483                        wm8960->out3 = w;
 484        }
 485        
 486        return 0;
 487}
 488
 489static int wm8960_set_dai_fmt(struct snd_soc_dai *codec_dai,
 490                unsigned int fmt)
 491{
 492        struct snd_soc_codec *codec = codec_dai->codec;
 493        u16 iface = 0;
 494
 495        /* set master/slave audio interface */
 496        switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
 497        case SND_SOC_DAIFMT_CBM_CFM:
 498                iface |= 0x0040;
 499                break;
 500        case SND_SOC_DAIFMT_CBS_CFS:
 501                break;
 502        default:
 503                return -EINVAL;
 504        }
 505
 506        /* interface format */
 507        switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
 508        case SND_SOC_DAIFMT_I2S:
 509                iface |= 0x0002;
 510                break;
 511        case SND_SOC_DAIFMT_RIGHT_J:
 512                break;
 513        case SND_SOC_DAIFMT_LEFT_J:
 514                iface |= 0x0001;
 515                break;
 516        case SND_SOC_DAIFMT_DSP_A:
 517                iface |= 0x0003;
 518                break;
 519        case SND_SOC_DAIFMT_DSP_B:
 520                iface |= 0x0013;
 521                break;
 522        default:
 523                return -EINVAL;
 524        }
 525
 526        /* clock inversion */
 527        switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
 528        case SND_SOC_DAIFMT_NB_NF:
 529                break;
 530        case SND_SOC_DAIFMT_IB_IF:
 531                iface |= 0x0090;
 532                break;
 533        case SND_SOC_DAIFMT_IB_NF:
 534                iface |= 0x0080;
 535                break;
 536        case SND_SOC_DAIFMT_NB_IF:
 537                iface |= 0x0010;
 538                break;
 539        default:
 540                return -EINVAL;
 541        }
 542
 543        /* set iface */
 544        snd_soc_write(codec, WM8960_IFACE1, iface);
 545        return 0;
 546}
 547
 548static struct {
 549        int rate;
 550        unsigned int val;
 551} alc_rates[] = {
 552        { 48000, 0 },
 553        { 44100, 0 },
 554        { 32000, 1 },
 555        { 22050, 2 },
 556        { 24000, 2 },
 557        { 16000, 3 },
 558        { 11250, 4 },
 559        { 12000, 4 },
 560        {  8000, 5 },
 561};
 562
 563static int wm8960_hw_params(struct snd_pcm_substream *substream,
 564                            struct snd_pcm_hw_params *params,
 565                            struct snd_soc_dai *dai)
 566{
 567        struct snd_soc_codec *codec = dai->codec;
 568        struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec);
 569        u16 iface = snd_soc_read(codec, WM8960_IFACE1) & 0xfff3;
 570        snd_pcm_format_t format = params_format(params);
 571        int i;
 572
 573        /* bit size */
 574        switch (format) {
 575        case SNDRV_PCM_FORMAT_S16_LE:
 576        case SNDRV_PCM_FORMAT_S16_BE:
 577                break;
 578        case SNDRV_PCM_FORMAT_S20_3LE:
 579        case SNDRV_PCM_FORMAT_S20_3BE:
 580                iface |= 0x0004;
 581                break;
 582        case SNDRV_PCM_FORMAT_S24_LE:
 583        case SNDRV_PCM_FORMAT_S24_BE:
 584                iface |= 0x0008;
 585                break;
 586        default:
 587                dev_err(codec->dev, "unsupported format %i\n", format);
 588                return -EINVAL;
 589        }
 590
 591        /* Update filters for the new rate */
 592        if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
 593                wm8960->playback_fs = params_rate(params);
 594                wm8960_set_deemph(codec);
 595        } else {
 596                for (i = 0; i < ARRAY_SIZE(alc_rates); i++)
 597                        if (alc_rates[i].rate == params_rate(params))
 598                                snd_soc_update_bits(codec,
 599                                                    WM8960_ADDCTL3, 0x7,
 600                                                    alc_rates[i].val);
 601        }
 602
 603        /* set iface */
 604        snd_soc_write(codec, WM8960_IFACE1, iface);
 605        return 0;
 606}
 607
 608static int wm8960_mute(struct snd_soc_dai *dai, int mute)
 609{
 610        struct snd_soc_codec *codec = dai->codec;
 611
 612        if (mute)
 613                snd_soc_update_bits(codec, WM8960_DACCTL1, 0x8, 0x8);
 614        else
 615                snd_soc_update_bits(codec, WM8960_DACCTL1, 0x8, 0);
 616        return 0;
 617}
 618
 619static int wm8960_set_bias_level_out3(struct snd_soc_codec *codec,
 620                                      enum snd_soc_bias_level level)
 621{
 622        struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec);
 623
 624        switch (level) {
 625        case SND_SOC_BIAS_ON:
 626                break;
 627
 628        case SND_SOC_BIAS_PREPARE:
 629                /* Set VMID to 2x50k */
 630                snd_soc_update_bits(codec, WM8960_POWER1, 0x180, 0x80);
 631                break;
 632
 633        case SND_SOC_BIAS_STANDBY:
 634                if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) {
 635                        regcache_sync(wm8960->regmap);
 636
 637                        /* Enable anti-pop features */
 638                        snd_soc_write(codec, WM8960_APOP1,
 639                                      WM8960_POBCTRL | WM8960_SOFT_ST |
 640                                      WM8960_BUFDCOPEN | WM8960_BUFIOEN);
 641
 642                        /* Enable & ramp VMID at 2x50k */
 643                        snd_soc_update_bits(codec, WM8960_POWER1, 0x80, 0x80);
 644                        msleep(100);
 645
 646                        /* Enable VREF */
 647                        snd_soc_update_bits(codec, WM8960_POWER1, WM8960_VREF,
 648                                            WM8960_VREF);
 649
 650                        /* Disable anti-pop features */
 651                        snd_soc_write(codec, WM8960_APOP1, WM8960_BUFIOEN);
 652                }
 653
 654                /* Set VMID to 2x250k */
 655                snd_soc_update_bits(codec, WM8960_POWER1, 0x180, 0x100);
 656                break;
 657
 658        case SND_SOC_BIAS_OFF:
 659                /* Enable anti-pop features */
 660                snd_soc_write(codec, WM8960_APOP1,
 661                             WM8960_POBCTRL | WM8960_SOFT_ST |
 662                             WM8960_BUFDCOPEN | WM8960_BUFIOEN);
 663
 664                /* Disable VMID and VREF, let them discharge */
 665                snd_soc_write(codec, WM8960_POWER1, 0);
 666                msleep(600);
 667                break;
 668        }
 669
 670        codec->dapm.bias_level = level;
 671
 672        return 0;
 673}
 674
 675static int wm8960_set_bias_level_capless(struct snd_soc_codec *codec,
 676                                         enum snd_soc_bias_level level)
 677{
 678        struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec);
 679        int reg;
 680
 681        switch (level) {
 682        case SND_SOC_BIAS_ON:
 683                break;
 684
 685        case SND_SOC_BIAS_PREPARE:
 686                switch (codec->dapm.bias_level) {
 687                case SND_SOC_BIAS_STANDBY:
 688                        /* Enable anti pop mode */
 689                        snd_soc_update_bits(codec, WM8960_APOP1,
 690                                            WM8960_POBCTRL | WM8960_SOFT_ST |
 691                                            WM8960_BUFDCOPEN,
 692                                            WM8960_POBCTRL | WM8960_SOFT_ST |
 693                                            WM8960_BUFDCOPEN);
 694
 695                        /* Enable LOUT1, ROUT1 and OUT3 if they're enabled */
 696                        reg = 0;
 697                        if (wm8960->lout1 && wm8960->lout1->power)
 698                                reg |= WM8960_PWR2_LOUT1;
 699                        if (wm8960->rout1 && wm8960->rout1->power)
 700                                reg |= WM8960_PWR2_ROUT1;
 701                        if (wm8960->out3 && wm8960->out3->power)
 702                                reg |= WM8960_PWR2_OUT3;
 703                        snd_soc_update_bits(codec, WM8960_POWER2,
 704                                            WM8960_PWR2_LOUT1 |
 705                                            WM8960_PWR2_ROUT1 |
 706                                            WM8960_PWR2_OUT3, reg);
 707
 708                        /* Enable VMID at 2*50k */
 709                        snd_soc_update_bits(codec, WM8960_POWER1,
 710                                            WM8960_VMID_MASK, 0x80);
 711
 712                        /* Ramp */
 713                        msleep(100);
 714
 715                        /* Enable VREF */
 716                        snd_soc_update_bits(codec, WM8960_POWER1,
 717                                            WM8960_VREF, WM8960_VREF);
 718
 719                        msleep(100);
 720                        break;
 721
 722                case SND_SOC_BIAS_ON:
 723                        /* Enable anti-pop mode */
 724                        snd_soc_update_bits(codec, WM8960_APOP1,
 725                                            WM8960_POBCTRL | WM8960_SOFT_ST |
 726                                            WM8960_BUFDCOPEN,
 727                                            WM8960_POBCTRL | WM8960_SOFT_ST |
 728                                            WM8960_BUFDCOPEN);
 729
 730                        /* Disable VMID and VREF */
 731                        snd_soc_update_bits(codec, WM8960_POWER1,
 732                                            WM8960_VREF | WM8960_VMID_MASK, 0);
 733                        break;
 734
 735                case SND_SOC_BIAS_OFF:
 736                        regcache_sync(wm8960->regmap);
 737                        break;
 738                default:
 739                        break;
 740                }
 741                break;
 742
 743        case SND_SOC_BIAS_STANDBY:
 744                switch (codec->dapm.bias_level) {
 745                case SND_SOC_BIAS_PREPARE:
 746                        /* Disable HP discharge */
 747                        snd_soc_update_bits(codec, WM8960_APOP2,
 748                                            WM8960_DISOP | WM8960_DRES_MASK,
 749                                            0);
 750
 751                        /* Disable anti-pop features */
 752                        snd_soc_update_bits(codec, WM8960_APOP1,
 753                                            WM8960_POBCTRL | WM8960_SOFT_ST |
 754                                            WM8960_BUFDCOPEN,
 755                                            WM8960_POBCTRL | WM8960_SOFT_ST |
 756                                            WM8960_BUFDCOPEN);
 757                        break;
 758
 759                default:
 760                        break;
 761                }
 762                break;
 763
 764        case SND_SOC_BIAS_OFF:
 765                break;
 766        }
 767
 768        codec->dapm.bias_level = level;
 769
 770        return 0;
 771}
 772
 773/* PLL divisors */
 774struct _pll_div {
 775        u32 pre_div:1;
 776        u32 n:4;
 777        u32 k:24;
 778};
 779
 780/* The size in bits of the pll divide multiplied by 10
 781 * to allow rounding later */
 782#define FIXED_PLL_SIZE ((1 << 24) * 10)
 783
 784static int pll_factors(unsigned int source, unsigned int target,
 785                       struct _pll_div *pll_div)
 786{
 787        unsigned long long Kpart;
 788        unsigned int K, Ndiv, Nmod;
 789
 790        pr_debug("WM8960 PLL: setting %dHz->%dHz\n", source, target);
 791
 792        /* Scale up target to PLL operating frequency */
 793        target *= 4;
 794
 795        Ndiv = target / source;
 796        if (Ndiv < 6) {
 797                source >>= 1;
 798                pll_div->pre_div = 1;
 799                Ndiv = target / source;
 800        } else
 801                pll_div->pre_div = 0;
 802
 803        if ((Ndiv < 6) || (Ndiv > 12)) {
 804                pr_err("WM8960 PLL: Unsupported N=%d\n", Ndiv);
 805                return -EINVAL;
 806        }
 807
 808        pll_div->n = Ndiv;
 809        Nmod = target % source;
 810        Kpart = FIXED_PLL_SIZE * (long long)Nmod;
 811
 812        do_div(Kpart, source);
 813
 814        K = Kpart & 0xFFFFFFFF;
 815
 816        /* Check if we need to round */
 817        if ((K % 10) >= 5)
 818                K += 5;
 819
 820        /* Move down to proper range now rounding is done */
 821        K /= 10;
 822
 823        pll_div->k = K;
 824
 825        pr_debug("WM8960 PLL: N=%x K=%x pre_div=%d\n",
 826                 pll_div->n, pll_div->k, pll_div->pre_div);
 827
 828        return 0;
 829}
 830
 831static int wm8960_set_dai_pll(struct snd_soc_dai *codec_dai, int pll_id,
 832                int source, unsigned int freq_in, unsigned int freq_out)
 833{
 834        struct snd_soc_codec *codec = codec_dai->codec;
 835        u16 reg;
 836        static struct _pll_div pll_div;
 837        int ret;
 838
 839        if (freq_in && freq_out) {
 840                ret = pll_factors(freq_in, freq_out, &pll_div);
 841                if (ret != 0)
 842                        return ret;
 843        }
 844
 845        /* Disable the PLL: even if we are changing the frequency the
 846         * PLL needs to be disabled while we do so. */
 847        snd_soc_update_bits(codec, WM8960_CLOCK1, 0x1, 0);
 848        snd_soc_update_bits(codec, WM8960_POWER2, 0x1, 0);
 849
 850        if (!freq_in || !freq_out)
 851                return 0;
 852
 853        reg = snd_soc_read(codec, WM8960_PLL1) & ~0x3f;
 854        reg |= pll_div.pre_div << 4;
 855        reg |= pll_div.n;
 856
 857        if (pll_div.k) {
 858                reg |= 0x20;
 859
 860                snd_soc_write(codec, WM8960_PLL2, (pll_div.k >> 18) & 0x3f);
 861                snd_soc_write(codec, WM8960_PLL3, (pll_div.k >> 9) & 0x1ff);
 862                snd_soc_write(codec, WM8960_PLL4, pll_div.k & 0x1ff);
 863        }
 864        snd_soc_write(codec, WM8960_PLL1, reg);
 865
 866        /* Turn it on */
 867        snd_soc_update_bits(codec, WM8960_POWER2, 0x1, 0x1);
 868        msleep(250);
 869        snd_soc_update_bits(codec, WM8960_CLOCK1, 0x1, 0x1);
 870
 871        return 0;
 872}
 873
 874static int wm8960_set_dai_clkdiv(struct snd_soc_dai *codec_dai,
 875                int div_id, int div)
 876{
 877        struct snd_soc_codec *codec = codec_dai->codec;
 878        u16 reg;
 879
 880        switch (div_id) {
 881        case WM8960_SYSCLKDIV:
 882                reg = snd_soc_read(codec, WM8960_CLOCK1) & 0x1f9;
 883                snd_soc_write(codec, WM8960_CLOCK1, reg | div);
 884                break;
 885        case WM8960_DACDIV:
 886                reg = snd_soc_read(codec, WM8960_CLOCK1) & 0x1c7;
 887                snd_soc_write(codec, WM8960_CLOCK1, reg | div);
 888                break;
 889        case WM8960_OPCLKDIV:
 890                reg = snd_soc_read(codec, WM8960_PLL1) & 0x03f;
 891                snd_soc_write(codec, WM8960_PLL1, reg | div);
 892                break;
 893        case WM8960_DCLKDIV:
 894                reg = snd_soc_read(codec, WM8960_CLOCK2) & 0x03f;
 895                snd_soc_write(codec, WM8960_CLOCK2, reg | div);
 896                break;
 897        case WM8960_TOCLKSEL:
 898                reg = snd_soc_read(codec, WM8960_ADDCTL1) & 0x1fd;
 899                snd_soc_write(codec, WM8960_ADDCTL1, reg | div);
 900                break;
 901        default:
 902                return -EINVAL;
 903        }
 904
 905        return 0;
 906}
 907
 908static int wm8960_set_bias_level(struct snd_soc_codec *codec,
 909                                 enum snd_soc_bias_level level)
 910{
 911        struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec);
 912
 913        return wm8960->set_bias_level(codec, level);
 914}
 915
 916#define WM8960_RATES SNDRV_PCM_RATE_8000_48000
 917
 918#define WM8960_FORMATS \
 919        (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \
 920        SNDRV_PCM_FMTBIT_S24_LE)
 921
 922static const struct snd_soc_dai_ops wm8960_dai_ops = {
 923        .hw_params = wm8960_hw_params,
 924        .digital_mute = wm8960_mute,
 925        .set_fmt = wm8960_set_dai_fmt,
 926        .set_clkdiv = wm8960_set_dai_clkdiv,
 927        .set_pll = wm8960_set_dai_pll,
 928};
 929
 930static struct snd_soc_dai_driver wm8960_dai = {
 931        .name = "wm8960-hifi",
 932        .playback = {
 933                .stream_name = "Playback",
 934                .channels_min = 1,
 935                .channels_max = 2,
 936                .rates = WM8960_RATES,
 937                .formats = WM8960_FORMATS,},
 938        .capture = {
 939                .stream_name = "Capture",
 940                .channels_min = 1,
 941                .channels_max = 2,
 942                .rates = WM8960_RATES,
 943                .formats = WM8960_FORMATS,},
 944        .ops = &wm8960_dai_ops,
 945        .symmetric_rates = 1,
 946};
 947
 948static int wm8960_suspend(struct snd_soc_codec *codec)
 949{
 950        struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec);
 951
 952        wm8960->set_bias_level(codec, SND_SOC_BIAS_OFF);
 953        return 0;
 954}
 955
 956static int wm8960_resume(struct snd_soc_codec *codec)
 957{
 958        struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec);
 959
 960        wm8960->set_bias_level(codec, SND_SOC_BIAS_STANDBY);
 961        return 0;
 962}
 963
 964static int wm8960_probe(struct snd_soc_codec *codec)
 965{
 966        struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec);
 967        struct wm8960_data *pdata = dev_get_platdata(codec->dev);
 968        int ret;
 969
 970        wm8960->set_bias_level = wm8960_set_bias_level_out3;
 971
 972        if (!pdata) {
 973                dev_warn(codec->dev, "No platform data supplied\n");
 974        } else {
 975                if (pdata->capless)
 976                        wm8960->set_bias_level = wm8960_set_bias_level_capless;
 977        }
 978
 979        ret = snd_soc_codec_set_cache_io(codec, 7, 9, SND_SOC_REGMAP);
 980        if (ret < 0) {
 981                dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
 982                return ret;
 983        }
 984
 985        ret = wm8960_reset(codec);
 986        if (ret < 0) {
 987                dev_err(codec->dev, "Failed to issue reset\n");
 988                return ret;
 989        }
 990
 991        wm8960->set_bias_level(codec, SND_SOC_BIAS_STANDBY);
 992
 993        /* Latch the update bits */
 994        snd_soc_update_bits(codec, WM8960_LINVOL, 0x100, 0x100);
 995        snd_soc_update_bits(codec, WM8960_RINVOL, 0x100, 0x100);
 996        snd_soc_update_bits(codec, WM8960_LADC, 0x100, 0x100);
 997        snd_soc_update_bits(codec, WM8960_RADC, 0x100, 0x100);
 998        snd_soc_update_bits(codec, WM8960_LDAC, 0x100, 0x100);
 999        snd_soc_update_bits(codec, WM8960_RDAC, 0x100, 0x100);
1000        snd_soc_update_bits(codec, WM8960_LOUT1, 0x100, 0x100);
1001        snd_soc_update_bits(codec, WM8960_ROUT1, 0x100, 0x100);
1002        snd_soc_update_bits(codec, WM8960_LOUT2, 0x100, 0x100);
1003        snd_soc_update_bits(codec, WM8960_ROUT2, 0x100, 0x100);
1004
1005        snd_soc_add_codec_controls(codec, wm8960_snd_controls,
1006                                     ARRAY_SIZE(wm8960_snd_controls));
1007        wm8960_add_widgets(codec);
1008
1009        return 0;
1010}
1011
1012/* power down chip */
1013static int wm8960_remove(struct snd_soc_codec *codec)
1014{
1015        struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec);
1016
1017        wm8960->set_bias_level(codec, SND_SOC_BIAS_OFF);
1018        return 0;
1019}
1020
1021static struct snd_soc_codec_driver soc_codec_dev_wm8960 = {
1022        .probe =        wm8960_probe,
1023        .remove =       wm8960_remove,
1024        .suspend =      wm8960_suspend,
1025        .resume =       wm8960_resume,
1026        .set_bias_level = wm8960_set_bias_level,
1027};
1028
1029static const struct regmap_config wm8960_regmap = {
1030        .reg_bits = 7,
1031        .val_bits = 9,
1032        .max_register = WM8960_PLL4,
1033
1034        .reg_defaults = wm8960_reg_defaults,
1035        .num_reg_defaults = ARRAY_SIZE(wm8960_reg_defaults),
1036        .cache_type = REGCACHE_RBTREE,
1037
1038        .volatile_reg = wm8960_volatile,
1039};
1040
1041static int wm8960_i2c_probe(struct i2c_client *i2c,
1042                            const struct i2c_device_id *id)
1043{
1044        struct wm8960_data *pdata = dev_get_platdata(&i2c->dev);
1045        struct wm8960_priv *wm8960;
1046        int ret;
1047
1048        wm8960 = devm_kzalloc(&i2c->dev, sizeof(struct wm8960_priv),
1049                              GFP_KERNEL);
1050        if (wm8960 == NULL)
1051                return -ENOMEM;
1052
1053        wm8960->regmap = devm_regmap_init_i2c(i2c, &wm8960_regmap);
1054        if (IS_ERR(wm8960->regmap))
1055                return PTR_ERR(wm8960->regmap);
1056
1057        if (pdata && pdata->shared_lrclk) {
1058                ret = regmap_update_bits(wm8960->regmap, WM8960_ADDCTL2,
1059                                         0x4, 0x4);
1060                if (ret != 0) {
1061                        dev_err(&i2c->dev, "Failed to enable LRCM: %d\n",
1062                                ret);
1063                        return ret;
1064                }
1065        }
1066
1067        i2c_set_clientdata(i2c, wm8960);
1068
1069        ret = snd_soc_register_codec(&i2c->dev,
1070                        &soc_codec_dev_wm8960, &wm8960_dai, 1);
1071
1072        return ret;
1073}
1074
1075static int wm8960_i2c_remove(struct i2c_client *client)
1076{
1077        snd_soc_unregister_codec(&client->dev);
1078        return 0;
1079}
1080
1081static const struct i2c_device_id wm8960_i2c_id[] = {
1082        { "wm8960", 0 },
1083        { }
1084};
1085MODULE_DEVICE_TABLE(i2c, wm8960_i2c_id);
1086
1087static struct i2c_driver wm8960_i2c_driver = {
1088        .driver = {
1089                .name = "wm8960",
1090                .owner = THIS_MODULE,
1091        },
1092        .probe =    wm8960_i2c_probe,
1093        .remove =   wm8960_i2c_remove,
1094        .id_table = wm8960_i2c_id,
1095};
1096
1097module_i2c_driver(wm8960_i2c_driver);
1098
1099MODULE_DESCRIPTION("ASoC WM8960 driver");
1100MODULE_AUTHOR("Liam Girdwood");
1101MODULE_LICENSE("GPL");
1102