linux/sound/soc/omap/omap-hdmi.c
<<
>>
Prefs
   1/*
   2 * omap-hdmi.c
   3 *
   4 * OMAP ALSA SoC DAI driver for HDMI audio on OMAP4 processors.
   5 * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com/
   6 * Authors: Jorge Candelaria <jorge.candelaria@ti.com>
   7 *          Ricardo Neri <ricardo.neri@ti.com>
   8 *
   9 * This program is free software; you can redistribute it and/or
  10 * modify it under the terms of the GNU General Public License
  11 * version 2 as published by the Free Software Foundation.
  12 *
  13 * This program is distributed in the hope that it will be useful, but
  14 * WITHOUT ANY WARRANTY; without even the implied warranty of
  15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  16 * General Public License for more details.
  17 *
  18 * You should have received a copy of the GNU General Public License
  19 * along with this program; if not, write to the Free Software
  20 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
  21 * 02110-1301 USA
  22 *
  23 */
  24
  25#include <linux/init.h>
  26#include <linux/module.h>
  27#include <linux/device.h>
  28#include <sound/core.h>
  29#include <sound/pcm.h>
  30#include <sound/pcm_params.h>
  31#include <sound/initval.h>
  32#include <sound/soc.h>
  33#include <sound/asound.h>
  34#include <sound/asoundef.h>
  35#include <sound/dmaengine_pcm.h>
  36#include <video/omapdss.h>
  37
  38#include "omap-hdmi.h"
  39
  40#define DRV_NAME "omap-hdmi-audio-dai"
  41
  42struct hdmi_priv {
  43        struct snd_dmaengine_dai_dma_data dma_data;
  44        unsigned int dma_req;
  45        struct omap_dss_audio dss_audio;
  46        struct snd_aes_iec958 iec;
  47        struct snd_cea_861_aud_if cea;
  48        struct omap_dss_device *dssdev;
  49};
  50
  51static int omap_hdmi_dai_startup(struct snd_pcm_substream *substream,
  52                                  struct snd_soc_dai *dai)
  53{
  54        struct hdmi_priv *priv = snd_soc_dai_get_drvdata(dai);
  55        int err;
  56        /*
  57         * Make sure that the period bytes are multiple of the DMA packet size.
  58         * Largest packet size we use is 32 32-bit words = 128 bytes
  59         */
  60        err = snd_pcm_hw_constraint_step(substream->runtime, 0,
  61                                 SNDRV_PCM_HW_PARAM_PERIOD_BYTES, 128);
  62        if (err < 0) {
  63                dev_err(dai->dev, "could not apply constraint\n");
  64                return err;
  65        }
  66
  67        if (!priv->dssdev->driver->audio_supported(priv->dssdev)) {
  68                dev_err(dai->dev, "audio not supported\n");
  69                return -ENODEV;
  70        }
  71
  72        snd_soc_dai_set_dma_data(dai, substream, &priv->dma_data);
  73
  74        return 0;
  75}
  76
  77static int omap_hdmi_dai_prepare(struct snd_pcm_substream *substream,
  78                                struct snd_soc_dai *dai)
  79{
  80        struct hdmi_priv *priv = snd_soc_dai_get_drvdata(dai);
  81
  82        return priv->dssdev->driver->audio_enable(priv->dssdev);
  83}
  84
  85static int omap_hdmi_dai_hw_params(struct snd_pcm_substream *substream,
  86                                    struct snd_pcm_hw_params *params,
  87                                    struct snd_soc_dai *dai)
  88{
  89        struct hdmi_priv *priv = snd_soc_dai_get_drvdata(dai);
  90        struct snd_aes_iec958 *iec = &priv->iec;
  91        struct snd_cea_861_aud_if *cea = &priv->cea;
  92        int err = 0;
  93
  94        switch (params_format(params)) {
  95        case SNDRV_PCM_FORMAT_S16_LE:
  96                priv->dma_data.maxburst = 16;
  97                break;
  98        case SNDRV_PCM_FORMAT_S24_LE:
  99                priv->dma_data.maxburst = 32;
 100                break;
 101        default:
 102                dev_err(dai->dev, "format not supported!\n");
 103                return -EINVAL;
 104        }
 105
 106        /*
 107         * fill the IEC-60958 channel status word
 108         */
 109        /* initialize the word bytes */
 110        memset(iec->status, 0, sizeof(iec->status));
 111
 112        /* specify IEC-60958-3 (commercial use) */
 113        iec->status[0] &= ~IEC958_AES0_PROFESSIONAL;
 114
 115        /* specify that the audio is LPCM*/
 116        iec->status[0] &= ~IEC958_AES0_NONAUDIO;
 117
 118        iec->status[0] |= IEC958_AES0_CON_NOT_COPYRIGHT;
 119
 120        iec->status[0] |= IEC958_AES0_CON_EMPHASIS_NONE;
 121
 122        iec->status[0] |= IEC958_AES1_PRO_MODE_NOTID;
 123
 124        iec->status[1] = IEC958_AES1_CON_GENERAL;
 125
 126        iec->status[2] |= IEC958_AES2_CON_SOURCE_UNSPEC;
 127
 128        iec->status[2] |= IEC958_AES2_CON_CHANNEL_UNSPEC;
 129
 130        switch (params_rate(params)) {
 131        case 32000:
 132                iec->status[3] |= IEC958_AES3_CON_FS_32000;
 133                break;
 134        case 44100:
 135                iec->status[3] |= IEC958_AES3_CON_FS_44100;
 136                break;
 137        case 48000:
 138                iec->status[3] |= IEC958_AES3_CON_FS_48000;
 139                break;
 140        case 88200:
 141                iec->status[3] |= IEC958_AES3_CON_FS_88200;
 142                break;
 143        case 96000:
 144                iec->status[3] |= IEC958_AES3_CON_FS_96000;
 145                break;
 146        case 176400:
 147                iec->status[3] |= IEC958_AES3_CON_FS_176400;
 148                break;
 149        case 192000:
 150                iec->status[3] |= IEC958_AES3_CON_FS_192000;
 151                break;
 152        default:
 153                dev_err(dai->dev, "rate not supported!\n");
 154                return -EINVAL;
 155        }
 156
 157        /* specify the clock accuracy */
 158        iec->status[3] |= IEC958_AES3_CON_CLOCK_1000PPM;
 159
 160        /*
 161         * specify the word length. The same word length value can mean
 162         * two different lengths. Hence, we need to specify the maximum
 163         * word length as well.
 164         */
 165        switch (params_format(params)) {
 166        case SNDRV_PCM_FORMAT_S16_LE:
 167                iec->status[4] |= IEC958_AES4_CON_WORDLEN_20_16;
 168                iec->status[4] &= ~IEC958_AES4_CON_MAX_WORDLEN_24;
 169                break;
 170        case SNDRV_PCM_FORMAT_S24_LE:
 171                iec->status[4] |= IEC958_AES4_CON_WORDLEN_24_20;
 172                iec->status[4] |= IEC958_AES4_CON_MAX_WORDLEN_24;
 173                break;
 174        default:
 175                dev_err(dai->dev, "format not supported!\n");
 176                return -EINVAL;
 177        }
 178
 179        /*
 180         * Fill the CEA-861 audio infoframe (see spec for details)
 181         */
 182
 183        cea->db1_ct_cc = (params_channels(params) - 1)
 184                & CEA861_AUDIO_INFOFRAME_DB1CC;
 185        cea->db1_ct_cc |= CEA861_AUDIO_INFOFRAME_DB1CT_FROM_STREAM;
 186
 187        cea->db2_sf_ss = CEA861_AUDIO_INFOFRAME_DB2SF_FROM_STREAM;
 188        cea->db2_sf_ss |= CEA861_AUDIO_INFOFRAME_DB2SS_FROM_STREAM;
 189
 190        cea->db3 = 0; /* not used, all zeros */
 191
 192        /*
 193         * The OMAP HDMI IP requires to use the 8-channel channel code when
 194         * transmitting more than two channels.
 195         */
 196        if (params_channels(params) == 2)
 197                cea->db4_ca = 0x0;
 198        else
 199                cea->db4_ca = 0x13;
 200
 201        cea->db5_dminh_lsv = CEA861_AUDIO_INFOFRAME_DB5_DM_INH_PROHIBITED;
 202        /* the expression is trivial but makes clear what we are doing */
 203        cea->db5_dminh_lsv |= (0 & CEA861_AUDIO_INFOFRAME_DB5_LSV);
 204
 205        priv->dss_audio.iec = iec;
 206        priv->dss_audio.cea = cea;
 207
 208        err = priv->dssdev->driver->audio_config(priv->dssdev,
 209                                                 &priv->dss_audio);
 210
 211        return err;
 212}
 213
 214static int omap_hdmi_dai_trigger(struct snd_pcm_substream *substream, int cmd,
 215                                struct snd_soc_dai *dai)
 216{
 217        struct hdmi_priv *priv = snd_soc_dai_get_drvdata(dai);
 218        int err = 0;
 219
 220        switch (cmd) {
 221        case SNDRV_PCM_TRIGGER_START:
 222        case SNDRV_PCM_TRIGGER_RESUME:
 223        case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
 224                err = priv->dssdev->driver->audio_start(priv->dssdev);
 225                break;
 226        case SNDRV_PCM_TRIGGER_STOP:
 227        case SNDRV_PCM_TRIGGER_SUSPEND:
 228        case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
 229                priv->dssdev->driver->audio_stop(priv->dssdev);
 230                break;
 231        default:
 232                err = -EINVAL;
 233        }
 234        return err;
 235}
 236
 237static void omap_hdmi_dai_shutdown(struct snd_pcm_substream *substream,
 238                                struct snd_soc_dai *dai)
 239{
 240        struct hdmi_priv *priv = snd_soc_dai_get_drvdata(dai);
 241
 242        priv->dssdev->driver->audio_disable(priv->dssdev);
 243}
 244
 245static const struct snd_soc_dai_ops omap_hdmi_dai_ops = {
 246        .startup        = omap_hdmi_dai_startup,
 247        .hw_params      = omap_hdmi_dai_hw_params,
 248        .prepare        = omap_hdmi_dai_prepare,
 249        .trigger        = omap_hdmi_dai_trigger,
 250        .shutdown       = omap_hdmi_dai_shutdown,
 251};
 252
 253static struct snd_soc_dai_driver omap_hdmi_dai = {
 254        .playback = {
 255                .channels_min = 2,
 256                .channels_max = 8,
 257                .rates = OMAP_HDMI_RATES,
 258                .formats = OMAP_HDMI_FORMATS,
 259        },
 260        .ops = &omap_hdmi_dai_ops,
 261};
 262
 263static const struct snd_soc_component_driver omap_hdmi_component = {
 264        .name           = DRV_NAME,
 265};
 266
 267static int omap_hdmi_probe(struct platform_device *pdev)
 268{
 269        int ret;
 270        struct resource *hdmi_rsrc;
 271        struct hdmi_priv *hdmi_data;
 272        bool hdmi_dev_found = false;
 273
 274        hdmi_data = devm_kzalloc(&pdev->dev, sizeof(*hdmi_data), GFP_KERNEL);
 275        if (hdmi_data == NULL) {
 276                dev_err(&pdev->dev, "Cannot allocate memory for HDMI data\n");
 277                return -ENOMEM;
 278        }
 279
 280        hdmi_rsrc = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 281        if (!hdmi_rsrc) {
 282                dev_err(&pdev->dev, "Cannot obtain IORESOURCE_MEM HDMI\n");
 283                return -ENODEV;
 284        }
 285
 286        hdmi_data->dma_data.addr = hdmi_rsrc->start + OMAP_HDMI_AUDIO_DMA_PORT;
 287
 288        hdmi_rsrc = platform_get_resource(pdev, IORESOURCE_DMA, 0);
 289        if (!hdmi_rsrc) {
 290                dev_err(&pdev->dev, "Cannot obtain IORESOURCE_DMA HDMI\n");
 291                return -ENODEV;
 292        }
 293
 294        hdmi_data->dma_req = hdmi_rsrc->start;
 295        hdmi_data->dma_data.filter_data = &hdmi_data->dma_req;
 296        hdmi_data->dma_data.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
 297
 298        /*
 299         * TODO: We assume that there is only one DSS HDMI device. Future
 300         * OMAP implementations may support more than one HDMI devices and
 301         * we should provided separate audio support for all of them.
 302         */
 303        /* Find an HDMI device. */
 304        for_each_dss_dev(hdmi_data->dssdev) {
 305                omap_dss_get_device(hdmi_data->dssdev);
 306
 307                if (!hdmi_data->dssdev->driver) {
 308                        omap_dss_put_device(hdmi_data->dssdev);
 309                        continue;
 310                }
 311
 312                if (hdmi_data->dssdev->type == OMAP_DISPLAY_TYPE_HDMI) {
 313                        hdmi_dev_found = true;
 314                        break;
 315                }
 316        }
 317
 318        if (!hdmi_dev_found) {
 319                dev_err(&pdev->dev, "no driver for HDMI display found\n");
 320                return -ENODEV;
 321        }
 322
 323        dev_set_drvdata(&pdev->dev, hdmi_data);
 324        ret = snd_soc_register_component(&pdev->dev, &omap_hdmi_component,
 325                                         &omap_hdmi_dai, 1);
 326
 327        return ret;
 328}
 329
 330static int omap_hdmi_remove(struct platform_device *pdev)
 331{
 332        struct hdmi_priv *hdmi_data = dev_get_drvdata(&pdev->dev);
 333
 334        snd_soc_unregister_component(&pdev->dev);
 335
 336        if (hdmi_data == NULL) {
 337                dev_err(&pdev->dev, "cannot obtain HDMi data\n");
 338                return -ENODEV;
 339        }
 340
 341        omap_dss_put_device(hdmi_data->dssdev);
 342        return 0;
 343}
 344
 345static struct platform_driver hdmi_dai_driver = {
 346        .driver = {
 347                .name = DRV_NAME,
 348                .owner = THIS_MODULE,
 349        },
 350        .probe = omap_hdmi_probe,
 351        .remove = omap_hdmi_remove,
 352};
 353
 354module_platform_driver(hdmi_dai_driver);
 355
 356MODULE_AUTHOR("Jorge Candelaria <jorge.candelaria@ti.com>");
 357MODULE_AUTHOR("Ricardo Neri <ricardo.neri@ti.com>");
 358MODULE_DESCRIPTION("OMAP HDMI SoC Interface");
 359MODULE_LICENSE("GPL");
 360MODULE_ALIAS("platform:" DRV_NAME);
 361