1
2
3
4
5
6
7
8
9
10
11
12#include <linux/irq.h>
13#include <linux/platform_device.h>
14#include <linux/delay.h>
15
16#include <linux/dm9000.h>
17#include <linux/rtc-v3020.h>
18#include <linux/mtd/nand.h>
19#include <linux/mtd/partitions.h>
20#include <linux/mtd/physmap.h>
21#include <linux/input.h>
22#include <linux/gpio_keys.h>
23#include <linux/gpio.h>
24#include <linux/mfd/da903x.h>
25#include <linux/regulator/machine.h>
26#include <linux/spi/spi.h>
27#include <linux/spi/tdo24m.h>
28#include <linux/spi/libertas_spi.h>
29#include <linux/spi/pxa2xx_spi.h>
30#include <linux/power_supply.h>
31#include <linux/apm-emulation.h>
32#include <linux/i2c.h>
33#include <linux/platform_data/pca953x.h>
34#include <linux/i2c/pxa-i2c.h>
35#include <linux/regulator/userspace-consumer.h>
36
37#include <media/soc_camera.h>
38
39#include <asm/mach-types.h>
40#include <asm/mach/arch.h>
41
42#include <mach/pxa27x.h>
43#include <mach/pxa27x-udc.h>
44#include <mach/audio.h>
45#include <linux/platform_data/video-pxafb.h>
46#include <linux/platform_data/usb-ohci-pxa27x.h>
47#include <linux/platform_data/mmc-pxamci.h>
48#include <linux/platform_data/keypad-pxa27x.h>
49#include <linux/platform_data/camera-pxa.h>
50
51#include "generic.h"
52#include "devices.h"
53
54
55#define GPIO13_MMC_CD (13)
56#define GPIO95_MMC_WP (95)
57#define GPIO56_NAND_RB (56)
58#define GPIO93_CAM_RESET (93)
59#define GPIO16_USB_HUB_RESET (16)
60
61
62#define GPIO114_MMC_CD (114)
63#define GPIO20_NAND_RB (20)
64#define GPIO38_SD_PWEN (38)
65#define GPIO37_WLAN_RST (37)
66#define GPIO95_TOUCHPAD_INT (95)
67#define GPIO130_CAM_RESET (130)
68#define GPIO10_USB_HUB_RESET (10)
69
70
71#define GPIO11_NAND_CS (11)
72#define GPIO41_ETHIRQ (41)
73#define EM_X270_ETHIRQ PXA_GPIO_TO_IRQ(GPIO41_ETHIRQ)
74#define GPIO115_WLAN_PWEN (115)
75#define GPIO19_WLAN_STRAP (19)
76#define GPIO9_USB_VBUS_EN (9)
77
78static int mmc_cd;
79static int nand_rb;
80static int dm9000_flags;
81static int cam_reset;
82static int usb_hub_reset;
83
84static unsigned long common_pin_config[] = {
85
86 GPIO28_AC97_BITCLK,
87 GPIO29_AC97_SDATA_IN_0,
88 GPIO30_AC97_SDATA_OUT,
89 GPIO31_AC97_SYNC,
90 GPIO98_AC97_SYSCLK,
91 GPIO113_AC97_nRESET,
92
93
94 GPIO42_BTUART_RXD,
95 GPIO43_BTUART_TXD,
96 GPIO44_BTUART_CTS,
97 GPIO45_BTUART_RTS,
98
99
100 GPIO46_STUART_RXD,
101 GPIO47_STUART_TXD,
102
103
104 GPIO32_MMC_CLK,
105 GPIO112_MMC_CMD,
106 GPIO92_MMC_DAT_0,
107 GPIO109_MMC_DAT_1,
108 GPIO110_MMC_DAT_2,
109 GPIO111_MMC_DAT_3,
110
111
112 GPIOxx_LCD_TFT_16BPP,
113
114
115 GPIO84_CIF_FV,
116 GPIO25_CIF_LV,
117 GPIO53_CIF_MCLK,
118 GPIO54_CIF_PCLK,
119 GPIO81_CIF_DD_0,
120 GPIO55_CIF_DD_1,
121 GPIO51_CIF_DD_2,
122 GPIO50_CIF_DD_3,
123 GPIO52_CIF_DD_4,
124 GPIO48_CIF_DD_5,
125 GPIO17_CIF_DD_6,
126 GPIO12_CIF_DD_7,
127
128
129 GPIO117_I2C_SCL,
130 GPIO118_I2C_SDA,
131
132
133 GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
134 GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
135 GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
136 GPIO34_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
137 GPIO39_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
138 GPIO99_KP_MKIN_5 | WAKEUP_ON_LEVEL_HIGH,
139 GPIO91_KP_MKIN_6 | WAKEUP_ON_LEVEL_HIGH,
140 GPIO36_KP_MKIN_7 | WAKEUP_ON_LEVEL_HIGH,
141 GPIO103_KP_MKOUT_0,
142 GPIO104_KP_MKOUT_1,
143 GPIO105_KP_MKOUT_2,
144 GPIO106_KP_MKOUT_3,
145 GPIO107_KP_MKOUT_4,
146 GPIO108_KP_MKOUT_5,
147 GPIO96_KP_MKOUT_6,
148 GPIO22_KP_MKOUT_7,
149
150
151 GPIO26_SSP1_RXD,
152 GPIO23_SSP1_SCLK,
153 GPIO24_SSP1_SFRM,
154 GPIO57_SSP1_TXD,
155
156
157 GPIO19_GPIO,
158 GPIO14_GPIO,
159 GPIO89_SSP2_TXD,
160 GPIO88_SSP2_RXD,
161
162
163 GPIO15_nCS_1,
164 GPIO78_nCS_2,
165 GPIO79_nCS_3,
166 GPIO80_nCS_4,
167 GPIO49_nPWE,
168 GPIO18_RDY,
169
170
171 GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
172
173
174 GPIO20_GPIO | MFP_LPM_DRIVE_LOW,
175 GPIO115_GPIO | MFP_LPM_DRIVE_LOW,
176
177
178 GPIO11_GPIO | MFP_LPM_DRIVE_HIGH,
179
180
181 GPIO41_GPIO,
182};
183
184static unsigned long em_x270_pin_config[] = {
185 GPIO13_GPIO,
186 GPIO16_GPIO,
187 GPIO56_GPIO,
188 GPIO93_GPIO | MFP_LPM_DRIVE_LOW,
189 GPIO95_GPIO,
190};
191
192static unsigned long exeda_pin_config[] = {
193 GPIO10_GPIO,
194 GPIO20_GPIO,
195 GPIO38_GPIO | MFP_LPM_DRIVE_LOW,
196 GPIO95_GPIO,
197 GPIO114_GPIO,
198};
199
200#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
201static struct resource em_x270_dm9000_resource[] = {
202 [0] = {
203 .start = PXA_CS2_PHYS,
204 .end = PXA_CS2_PHYS + 3,
205 .flags = IORESOURCE_MEM,
206 },
207 [1] = {
208 .start = PXA_CS2_PHYS + 8,
209 .end = PXA_CS2_PHYS + 8 + 0x3f,
210 .flags = IORESOURCE_MEM,
211 },
212 [2] = {
213 .start = EM_X270_ETHIRQ,
214 .end = EM_X270_ETHIRQ,
215 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
216 }
217};
218
219static struct dm9000_plat_data em_x270_dm9000_platdata = {
220 .flags = DM9000_PLATF_NO_EEPROM,
221};
222
223static struct platform_device em_x270_dm9000 = {
224 .name = "dm9000",
225 .id = 0,
226 .num_resources = ARRAY_SIZE(em_x270_dm9000_resource),
227 .resource = em_x270_dm9000_resource,
228 .dev = {
229 .platform_data = &em_x270_dm9000_platdata,
230 }
231};
232
233static void __init em_x270_init_dm9000(void)
234{
235 em_x270_dm9000_platdata.flags |= dm9000_flags;
236 platform_device_register(&em_x270_dm9000);
237}
238#else
239static inline void em_x270_init_dm9000(void) {}
240#endif
241
242
243#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
244static struct resource em_x270_v3020_resource[] = {
245 [0] = {
246 .start = PXA_CS4_PHYS,
247 .end = PXA_CS4_PHYS + 3,
248 .flags = IORESOURCE_MEM,
249 },
250};
251
252static struct v3020_platform_data em_x270_v3020_platdata = {
253 .leftshift = 0,
254};
255
256static struct platform_device em_x270_rtc = {
257 .name = "v3020",
258 .num_resources = ARRAY_SIZE(em_x270_v3020_resource),
259 .resource = em_x270_v3020_resource,
260 .id = -1,
261 .dev = {
262 .platform_data = &em_x270_v3020_platdata,
263 }
264};
265
266static void __init em_x270_init_rtc(void)
267{
268 platform_device_register(&em_x270_rtc);
269}
270#else
271static inline void em_x270_init_rtc(void) {}
272#endif
273
274
275#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
276static inline void nand_cs_on(void)
277{
278 gpio_set_value(GPIO11_NAND_CS, 0);
279}
280
281static void nand_cs_off(void)
282{
283 dsb();
284
285 gpio_set_value(GPIO11_NAND_CS, 1);
286}
287
288
289static void em_x270_nand_cmd_ctl(struct mtd_info *mtd, int dat,
290 unsigned int ctrl)
291{
292 struct nand_chip *this = mtd->priv;
293 unsigned long nandaddr = (unsigned long)this->IO_ADDR_W;
294
295 dsb();
296
297 if (ctrl & NAND_CTRL_CHANGE) {
298 if (ctrl & NAND_ALE)
299 nandaddr |= (1 << 3);
300 else
301 nandaddr &= ~(1 << 3);
302 if (ctrl & NAND_CLE)
303 nandaddr |= (1 << 2);
304 else
305 nandaddr &= ~(1 << 2);
306 if (ctrl & NAND_NCE)
307 nand_cs_on();
308 else
309 nand_cs_off();
310 }
311
312 dsb();
313 this->IO_ADDR_W = (void __iomem *)nandaddr;
314 if (dat != NAND_CMD_NONE)
315 writel(dat, this->IO_ADDR_W);
316
317 dsb();
318}
319
320
321static int em_x270_nand_device_ready(struct mtd_info *mtd)
322{
323 dsb();
324
325 return gpio_get_value(nand_rb);
326}
327
328static struct mtd_partition em_x270_partition_info[] = {
329 [0] = {
330 .name = "em_x270-0",
331 .offset = 0,
332 .size = SZ_4M,
333 },
334 [1] = {
335 .name = "em_x270-1",
336 .offset = MTDPART_OFS_APPEND,
337 .size = MTDPART_SIZ_FULL
338 },
339};
340
341struct platform_nand_data em_x270_nand_platdata = {
342 .chip = {
343 .nr_chips = 1,
344 .chip_offset = 0,
345 .nr_partitions = ARRAY_SIZE(em_x270_partition_info),
346 .partitions = em_x270_partition_info,
347 .chip_delay = 20,
348 },
349 .ctrl = {
350 .hwcontrol = 0,
351 .dev_ready = em_x270_nand_device_ready,
352 .select_chip = 0,
353 .cmd_ctrl = em_x270_nand_cmd_ctl,
354 },
355};
356
357static struct resource em_x270_nand_resource[] = {
358 [0] = {
359 .start = PXA_CS1_PHYS,
360 .end = PXA_CS1_PHYS + 12,
361 .flags = IORESOURCE_MEM,
362 },
363};
364
365static struct platform_device em_x270_nand = {
366 .name = "gen_nand",
367 .num_resources = ARRAY_SIZE(em_x270_nand_resource),
368 .resource = em_x270_nand_resource,
369 .id = -1,
370 .dev = {
371 .platform_data = &em_x270_nand_platdata,
372 }
373};
374
375static void __init em_x270_init_nand(void)
376{
377 int err;
378
379 err = gpio_request(GPIO11_NAND_CS, "NAND CS");
380 if (err) {
381 pr_warning("EM-X270: failed to request NAND CS gpio\n");
382 return;
383 }
384
385 gpio_direction_output(GPIO11_NAND_CS, 1);
386
387 err = gpio_request(nand_rb, "NAND R/B");
388 if (err) {
389 pr_warning("EM-X270: failed to request NAND R/B gpio\n");
390 gpio_free(GPIO11_NAND_CS);
391 return;
392 }
393
394 gpio_direction_input(nand_rb);
395
396 platform_device_register(&em_x270_nand);
397}
398#else
399static inline void em_x270_init_nand(void) {}
400#endif
401
402#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
403static struct mtd_partition em_x270_nor_parts[] = {
404 {
405 .name = "Bootloader",
406 .offset = 0x00000000,
407 .size = 0x00050000,
408 .mask_flags = MTD_WRITEABLE
409 }, {
410 .name = "Environment",
411 .offset = 0x00050000,
412 .size = 0x00010000,
413 }, {
414 .name = "Reserved",
415 .offset = 0x00060000,
416 .size = 0x00050000,
417 .mask_flags = MTD_WRITEABLE
418 }, {
419 .name = "Splashscreen",
420 .offset = 0x000b0000,
421 .size = 0x00050000,
422 }
423};
424
425static struct physmap_flash_data em_x270_nor_data[] = {
426 [0] = {
427 .width = 2,
428 .parts = em_x270_nor_parts,
429 .nr_parts = ARRAY_SIZE(em_x270_nor_parts),
430 },
431};
432
433static struct resource em_x270_nor_flash_resource = {
434 .start = PXA_CS0_PHYS,
435 .end = PXA_CS0_PHYS + SZ_1M - 1,
436 .flags = IORESOURCE_MEM,
437};
438
439static struct platform_device em_x270_physmap_flash = {
440 .name = "physmap-flash",
441 .id = 0,
442 .num_resources = 1,
443 .resource = &em_x270_nor_flash_resource,
444 .dev = {
445 .platform_data = &em_x270_nor_data,
446 },
447};
448
449static void __init em_x270_init_nor(void)
450{
451 platform_device_register(&em_x270_physmap_flash);
452}
453#else
454static inline void em_x270_init_nor(void) {}
455#endif
456
457
458#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
459static struct regulator *em_x270_usb_ldo;
460
461static int em_x270_usb_hub_init(void)
462{
463 int err;
464
465 em_x270_usb_ldo = regulator_get(NULL, "vcc usb");
466 if (IS_ERR(em_x270_usb_ldo))
467 return PTR_ERR(em_x270_usb_ldo);
468
469 err = gpio_request(GPIO9_USB_VBUS_EN, "vbus en");
470 if (err)
471 goto err_free_usb_ldo;
472
473 err = gpio_request(usb_hub_reset, "hub rst");
474 if (err)
475 goto err_free_vbus_gpio;
476
477
478 gpio_direction_output(usb_hub_reset, 1);
479 gpio_direction_output(GPIO9_USB_VBUS_EN, 0);
480 err = regulator_enable(em_x270_usb_ldo);
481 if (err)
482 goto err_free_rst_gpio;
483
484 gpio_set_value(usb_hub_reset, 0);
485 gpio_set_value(usb_hub_reset, 1);
486 regulator_disable(em_x270_usb_ldo);
487 err = regulator_enable(em_x270_usb_ldo);
488 if (err)
489 goto err_free_rst_gpio;
490
491 gpio_set_value(usb_hub_reset, 0);
492 gpio_set_value(GPIO9_USB_VBUS_EN, 1);
493
494 return 0;
495
496err_free_rst_gpio:
497 gpio_free(usb_hub_reset);
498err_free_vbus_gpio:
499 gpio_free(GPIO9_USB_VBUS_EN);
500err_free_usb_ldo:
501 regulator_put(em_x270_usb_ldo);
502
503 return err;
504}
505
506static int em_x270_ohci_init(struct device *dev)
507{
508 int err;
509
510
511 err = em_x270_usb_hub_init();
512 if (err)
513 pr_err("USB Hub initialization failed: %d\n", err);
514
515
516 UP2OCR = UP2OCR_HXS | UP2OCR_HXOE;
517
518 return 0;
519}
520
521static void em_x270_ohci_exit(struct device *dev)
522{
523 gpio_free(usb_hub_reset);
524 gpio_free(GPIO9_USB_VBUS_EN);
525
526 if (!IS_ERR(em_x270_usb_ldo)) {
527 if (regulator_is_enabled(em_x270_usb_ldo))
528 regulator_disable(em_x270_usb_ldo);
529
530 regulator_put(em_x270_usb_ldo);
531 }
532}
533
534static struct pxaohci_platform_data em_x270_ohci_platform_data = {
535 .port_mode = PMM_PERPORT_MODE,
536 .flags = ENABLE_PORT1 | ENABLE_PORT2 | POWER_CONTROL_LOW,
537 .init = em_x270_ohci_init,
538 .exit = em_x270_ohci_exit,
539};
540
541static void __init em_x270_init_ohci(void)
542{
543 pxa_set_ohci_info(&em_x270_ohci_platform_data);
544}
545#else
546static inline void em_x270_init_ohci(void) {}
547#endif
548
549
550#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
551static struct regulator *em_x270_sdio_ldo;
552
553static int em_x270_mci_init(struct device *dev,
554 irq_handler_t em_x270_detect_int,
555 void *data)
556{
557 int err;
558
559 em_x270_sdio_ldo = regulator_get(dev, "vcc sdio");
560 if (IS_ERR(em_x270_sdio_ldo)) {
561 dev_err(dev, "can't request SDIO power supply: %ld\n",
562 PTR_ERR(em_x270_sdio_ldo));
563 return PTR_ERR(em_x270_sdio_ldo);
564 }
565
566 err = request_irq(gpio_to_irq(mmc_cd), em_x270_detect_int,
567 IRQF_DISABLED | IRQF_TRIGGER_RISING |
568 IRQF_TRIGGER_FALLING,
569 "MMC card detect", data);
570 if (err) {
571 dev_err(dev, "can't request MMC card detect IRQ: %d\n", err);
572 goto err_irq;
573 }
574
575 if (machine_is_em_x270()) {
576 err = gpio_request(GPIO95_MMC_WP, "MMC WP");
577 if (err) {
578 dev_err(dev, "can't request MMC write protect: %d\n",
579 err);
580 goto err_gpio_wp;
581 }
582 gpio_direction_input(GPIO95_MMC_WP);
583 } else {
584 err = gpio_request(GPIO38_SD_PWEN, "sdio power");
585 if (err) {
586 dev_err(dev, "can't request MMC power control : %d\n",
587 err);
588 goto err_gpio_wp;
589 }
590 gpio_direction_output(GPIO38_SD_PWEN, 1);
591 }
592
593 return 0;
594
595err_gpio_wp:
596 free_irq(gpio_to_irq(mmc_cd), data);
597err_irq:
598 regulator_put(em_x270_sdio_ldo);
599
600 return err;
601}
602
603static int em_x270_mci_setpower(struct device *dev, unsigned int vdd)
604{
605 struct pxamci_platform_data* p_d = dev->platform_data;
606
607 if ((1 << vdd) & p_d->ocr_mask) {
608 int vdd_uV = (2000 + (vdd - __ffs(MMC_VDD_20_21)) * 100) * 1000;
609
610 regulator_set_voltage(em_x270_sdio_ldo, vdd_uV, vdd_uV);
611 return regulator_enable(em_x270_sdio_ldo);
612 } else {
613 regulator_disable(em_x270_sdio_ldo);
614 }
615 return 0;
616}
617
618static void em_x270_mci_exit(struct device *dev, void *data)
619{
620 free_irq(gpio_to_irq(mmc_cd), data);
621 regulator_put(em_x270_sdio_ldo);
622
623 if (machine_is_em_x270())
624 gpio_free(GPIO95_MMC_WP);
625 else
626 gpio_free(GPIO38_SD_PWEN);
627}
628
629static int em_x270_mci_get_ro(struct device *dev)
630{
631 return gpio_get_value(GPIO95_MMC_WP);
632}
633
634static struct pxamci_platform_data em_x270_mci_platform_data = {
635 .detect_delay_ms = 250,
636 .ocr_mask = MMC_VDD_20_21|MMC_VDD_21_22|MMC_VDD_22_23|
637 MMC_VDD_24_25|MMC_VDD_25_26|MMC_VDD_26_27|
638 MMC_VDD_27_28|MMC_VDD_28_29|MMC_VDD_29_30|
639 MMC_VDD_30_31|MMC_VDD_31_32,
640 .init = em_x270_mci_init,
641 .setpower = em_x270_mci_setpower,
642 .exit = em_x270_mci_exit,
643 .gpio_card_detect = -1,
644 .gpio_card_ro = -1,
645 .gpio_power = -1,
646};
647
648static void __init em_x270_init_mmc(void)
649{
650 if (machine_is_em_x270())
651 em_x270_mci_platform_data.get_ro = em_x270_mci_get_ro;
652
653 pxa_set_mci_info(&em_x270_mci_platform_data);
654}
655#else
656static inline void em_x270_init_mmc(void) {}
657#endif
658
659
660#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
661static struct pxafb_mode_info em_x270_lcd_modes[] = {
662 [0] = {
663 .pixclock = 38250,
664 .bpp = 16,
665 .xres = 480,
666 .yres = 640,
667 .hsync_len = 8,
668 .vsync_len = 2,
669 .left_margin = 8,
670 .upper_margin = 2,
671 .right_margin = 24,
672 .lower_margin = 4,
673 .sync = 0,
674 },
675 [1] = {
676 .pixclock = 153800,
677 .bpp = 16,
678 .xres = 240,
679 .yres = 320,
680 .hsync_len = 8,
681 .vsync_len = 2,
682 .left_margin = 8,
683 .upper_margin = 2,
684 .right_margin = 88,
685 .lower_margin = 2,
686 .sync = 0,
687 },
688};
689
690static struct pxafb_mach_info em_x270_lcd = {
691 .modes = em_x270_lcd_modes,
692 .num_modes = 2,
693 .lcd_conn = LCD_COLOR_TFT_16BPP,
694};
695
696static void __init em_x270_init_lcd(void)
697{
698 pxa_set_fb_info(NULL, &em_x270_lcd);
699}
700#else
701static inline void em_x270_init_lcd(void) {}
702#endif
703
704#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
705static struct pxa2xx_spi_master em_x270_spi_info = {
706 .num_chipselect = 1,
707};
708
709static struct pxa2xx_spi_chip em_x270_tdo24m_chip = {
710 .rx_threshold = 1,
711 .tx_threshold = 1,
712 .gpio_cs = -1,
713};
714
715static struct tdo24m_platform_data em_x270_tdo24m_pdata = {
716 .model = TDO35S,
717};
718
719static struct pxa2xx_spi_master em_x270_spi_2_info = {
720 .num_chipselect = 1,
721 .enable_dma = 1,
722};
723
724static struct pxa2xx_spi_chip em_x270_libertas_chip = {
725 .rx_threshold = 1,
726 .tx_threshold = 1,
727 .timeout = 1000,
728 .gpio_cs = 14,
729};
730
731static unsigned long em_x270_libertas_pin_config[] = {
732
733 GPIO19_SSP2_SCLK,
734 GPIO14_GPIO,
735 GPIO89_SSP2_TXD,
736 GPIO88_SSP2_RXD,
737};
738
739static int em_x270_libertas_setup(struct spi_device *spi)
740{
741 int err = gpio_request(GPIO115_WLAN_PWEN, "WLAN PWEN");
742 if (err)
743 return err;
744
745 err = gpio_request(GPIO19_WLAN_STRAP, "WLAN STRAP");
746 if (err)
747 goto err_free_pwen;
748
749 if (machine_is_exeda()) {
750 err = gpio_request(GPIO37_WLAN_RST, "WLAN RST");
751 if (err)
752 goto err_free_strap;
753
754 gpio_direction_output(GPIO37_WLAN_RST, 1);
755 msleep(100);
756 }
757
758 gpio_direction_output(GPIO19_WLAN_STRAP, 1);
759 msleep(100);
760
761 pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_libertas_pin_config));
762
763 gpio_direction_output(GPIO115_WLAN_PWEN, 0);
764 msleep(100);
765 gpio_set_value(GPIO115_WLAN_PWEN, 1);
766 msleep(100);
767
768 spi->bits_per_word = 16;
769 spi_setup(spi);
770
771 return 0;
772
773err_free_strap:
774 gpio_free(GPIO19_WLAN_STRAP);
775err_free_pwen:
776 gpio_free(GPIO115_WLAN_PWEN);
777
778 return err;
779}
780
781static int em_x270_libertas_teardown(struct spi_device *spi)
782{
783 gpio_set_value(GPIO115_WLAN_PWEN, 0);
784 gpio_free(GPIO115_WLAN_PWEN);
785 gpio_free(GPIO19_WLAN_STRAP);
786
787 if (machine_is_exeda()) {
788 gpio_set_value(GPIO37_WLAN_RST, 0);
789 gpio_free(GPIO37_WLAN_RST);
790 }
791
792 return 0;
793}
794
795struct libertas_spi_platform_data em_x270_libertas_pdata = {
796 .use_dummy_writes = 1,
797 .setup = em_x270_libertas_setup,
798 .teardown = em_x270_libertas_teardown,
799};
800
801static struct spi_board_info em_x270_spi_devices[] __initdata = {
802 {
803 .modalias = "tdo24m",
804 .max_speed_hz = 1000000,
805 .bus_num = 1,
806 .chip_select = 0,
807 .controller_data = &em_x270_tdo24m_chip,
808 .platform_data = &em_x270_tdo24m_pdata,
809 },
810 {
811 .modalias = "libertas_spi",
812 .max_speed_hz = 13000000,
813 .bus_num = 2,
814 .irq = PXA_GPIO_TO_IRQ(116),
815 .chip_select = 0,
816 .controller_data = &em_x270_libertas_chip,
817 .platform_data = &em_x270_libertas_pdata,
818 },
819};
820
821static void __init em_x270_init_spi(void)
822{
823 pxa2xx_set_spi_info(1, &em_x270_spi_info);
824 pxa2xx_set_spi_info(2, &em_x270_spi_2_info);
825 spi_register_board_info(ARRAY_AND_SIZE(em_x270_spi_devices));
826}
827#else
828static inline void em_x270_init_spi(void) {}
829#endif
830
831#if defined(CONFIG_SND_PXA2XX_LIB_AC97)
832static pxa2xx_audio_ops_t em_x270_ac97_info = {
833 .reset_gpio = 113,
834};
835
836static void __init em_x270_init_ac97(void)
837{
838 pxa_set_ac97_info(&em_x270_ac97_info);
839}
840#else
841static inline void em_x270_init_ac97(void) {}
842#endif
843
844#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
845static const unsigned int em_x270_module_matrix_keys[] = {
846 KEY(0, 0, KEY_A), KEY(1, 0, KEY_UP), KEY(2, 1, KEY_B),
847 KEY(0, 2, KEY_LEFT), KEY(1, 1, KEY_ENTER), KEY(2, 0, KEY_RIGHT),
848 KEY(0, 1, KEY_C), KEY(1, 2, KEY_DOWN), KEY(2, 2, KEY_D),
849};
850
851static struct matrix_keymap_data em_x270_matrix_keymap_data = {
852 .keymap = em_x270_module_matrix_keys,
853 .keymap_size = ARRAY_SIZE(em_x270_module_matrix_keys),
854};
855
856struct pxa27x_keypad_platform_data em_x270_module_keypad_info = {
857
858 .matrix_key_rows = 3,
859 .matrix_key_cols = 3,
860 .matrix_keymap_data = &em_x270_matrix_keymap_data,
861};
862
863static const unsigned int em_x270_exeda_matrix_keys[] = {
864 KEY(0, 0, KEY_RIGHTSHIFT), KEY(0, 1, KEY_RIGHTCTRL),
865 KEY(0, 2, KEY_RIGHTALT), KEY(0, 3, KEY_SPACE),
866 KEY(0, 4, KEY_LEFTALT), KEY(0, 5, KEY_LEFTCTRL),
867 KEY(0, 6, KEY_ENTER), KEY(0, 7, KEY_SLASH),
868
869 KEY(1, 0, KEY_DOT), KEY(1, 1, KEY_M),
870 KEY(1, 2, KEY_N), KEY(1, 3, KEY_B),
871 KEY(1, 4, KEY_V), KEY(1, 5, KEY_C),
872 KEY(1, 6, KEY_X), KEY(1, 7, KEY_Z),
873
874 KEY(2, 0, KEY_LEFTSHIFT), KEY(2, 1, KEY_SEMICOLON),
875 KEY(2, 2, KEY_L), KEY(2, 3, KEY_K),
876 KEY(2, 4, KEY_J), KEY(2, 5, KEY_H),
877 KEY(2, 6, KEY_G), KEY(2, 7, KEY_F),
878
879 KEY(3, 0, KEY_D), KEY(3, 1, KEY_S),
880 KEY(3, 2, KEY_A), KEY(3, 3, KEY_TAB),
881 KEY(3, 4, KEY_BACKSPACE), KEY(3, 5, KEY_P),
882 KEY(3, 6, KEY_O), KEY(3, 7, KEY_I),
883
884 KEY(4, 0, KEY_U), KEY(4, 1, KEY_Y),
885 KEY(4, 2, KEY_T), KEY(4, 3, KEY_R),
886 KEY(4, 4, KEY_E), KEY(4, 5, KEY_W),
887 KEY(4, 6, KEY_Q), KEY(4, 7, KEY_MINUS),
888
889 KEY(5, 0, KEY_0), KEY(5, 1, KEY_9),
890 KEY(5, 2, KEY_8), KEY(5, 3, KEY_7),
891 KEY(5, 4, KEY_6), KEY(5, 5, KEY_5),
892 KEY(5, 6, KEY_4), KEY(5, 7, KEY_3),
893
894 KEY(6, 0, KEY_2), KEY(6, 1, KEY_1),
895 KEY(6, 2, KEY_ENTER), KEY(6, 3, KEY_END),
896 KEY(6, 4, KEY_DOWN), KEY(6, 5, KEY_UP),
897 KEY(6, 6, KEY_MENU), KEY(6, 7, KEY_F1),
898
899 KEY(7, 0, KEY_LEFT), KEY(7, 1, KEY_RIGHT),
900 KEY(7, 2, KEY_BACK), KEY(7, 3, KEY_HOME),
901 KEY(7, 4, 0), KEY(7, 5, 0),
902 KEY(7, 6, 0), KEY(7, 7, 0),
903};
904
905static struct matrix_keymap_data em_x270_exeda_matrix_keymap_data = {
906 .keymap = em_x270_exeda_matrix_keys,
907 .keymap_size = ARRAY_SIZE(em_x270_exeda_matrix_keys),
908};
909
910struct pxa27x_keypad_platform_data em_x270_exeda_keypad_info = {
911
912 .matrix_key_rows = 8,
913 .matrix_key_cols = 8,
914 .matrix_keymap_data = &em_x270_exeda_matrix_keymap_data,
915};
916
917static void __init em_x270_init_keypad(void)
918{
919 if (machine_is_em_x270())
920 pxa_set_keypad_info(&em_x270_module_keypad_info);
921 else
922 pxa_set_keypad_info(&em_x270_exeda_keypad_info);
923}
924#else
925static inline void em_x270_init_keypad(void) {}
926#endif
927
928#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
929static struct gpio_keys_button gpio_keys_button[] = {
930 [0] = {
931 .desc = "sleep/wakeup",
932 .code = KEY_SUSPEND,
933 .type = EV_PWR,
934 .gpio = 1,
935 .wakeup = 1,
936 },
937};
938
939static struct gpio_keys_platform_data em_x270_gpio_keys_data = {
940 .buttons = gpio_keys_button,
941 .nbuttons = 1,
942};
943
944static struct platform_device em_x270_gpio_keys = {
945 .name = "gpio-keys",
946 .id = -1,
947 .dev = {
948 .platform_data = &em_x270_gpio_keys_data,
949 },
950};
951
952static void __init em_x270_init_gpio_keys(void)
953{
954 platform_device_register(&em_x270_gpio_keys);
955}
956#else
957static inline void em_x270_init_gpio_keys(void) {}
958#endif
959
960
961#if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE)
962static struct regulator *em_x270_camera_ldo;
963
964static int em_x270_sensor_init(void)
965{
966 int ret;
967
968 ret = gpio_request(cam_reset, "camera reset");
969 if (ret)
970 return ret;
971
972 gpio_direction_output(cam_reset, 0);
973
974 em_x270_camera_ldo = regulator_get(NULL, "vcc cam");
975 if (em_x270_camera_ldo == NULL) {
976 gpio_free(cam_reset);
977 return -ENODEV;
978 }
979
980 ret = regulator_enable(em_x270_camera_ldo);
981 if (ret) {
982 regulator_put(em_x270_camera_ldo);
983 gpio_free(cam_reset);
984 return ret;
985 }
986
987 gpio_set_value(cam_reset, 1);
988
989 return 0;
990}
991
992struct pxacamera_platform_data em_x270_camera_platform_data = {
993 .flags = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
994 PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
995 .mclk_10khz = 2600,
996};
997
998static int em_x270_sensor_power(struct device *dev, int on)
999{
1000 int ret;
1001 int is_on = regulator_is_enabled(em_x270_camera_ldo);
1002
1003 if (on == is_on)
1004 return 0;
1005
1006 gpio_set_value(cam_reset, !on);
1007
1008 if (on)
1009 ret = regulator_enable(em_x270_camera_ldo);
1010 else
1011 ret = regulator_disable(em_x270_camera_ldo);
1012
1013 if (ret)
1014 return ret;
1015
1016 gpio_set_value(cam_reset, on);
1017
1018 return 0;
1019}
1020
1021static struct i2c_board_info em_x270_i2c_cam_info[] = {
1022 {
1023 I2C_BOARD_INFO("mt9m111", 0x48),
1024 },
1025};
1026
1027static struct soc_camera_link iclink = {
1028 .bus_id = 0,
1029 .power = em_x270_sensor_power,
1030 .board_info = &em_x270_i2c_cam_info[0],
1031 .i2c_adapter_id = 0,
1032};
1033
1034static struct platform_device em_x270_camera = {
1035 .name = "soc-camera-pdrv",
1036 .id = -1,
1037 .dev = {
1038 .platform_data = &iclink,
1039 },
1040};
1041
1042static void __init em_x270_init_camera(void)
1043{
1044 if (em_x270_sensor_init() == 0) {
1045 pxa_set_camera_info(&em_x270_camera_platform_data);
1046 platform_device_register(&em_x270_camera);
1047 }
1048}
1049#else
1050static inline void em_x270_init_camera(void) {}
1051#endif
1052
1053static struct regulator_bulk_data em_x270_gps_consumer_supply = {
1054 .supply = "vcc gps",
1055};
1056
1057static struct regulator_userspace_consumer_data em_x270_gps_consumer_data = {
1058 .name = "vcc gps",
1059 .num_supplies = 1,
1060 .supplies = &em_x270_gps_consumer_supply,
1061};
1062
1063static struct platform_device em_x270_gps_userspace_consumer = {
1064 .name = "reg-userspace-consumer",
1065 .id = 0,
1066 .dev = {
1067 .platform_data = &em_x270_gps_consumer_data,
1068 },
1069};
1070
1071static struct regulator_bulk_data em_x270_gprs_consumer_supply = {
1072 .supply = "vcc gprs",
1073};
1074
1075static struct regulator_userspace_consumer_data em_x270_gprs_consumer_data = {
1076 .name = "vcc gprs",
1077 .num_supplies = 1,
1078 .supplies = &em_x270_gprs_consumer_supply
1079};
1080
1081static struct platform_device em_x270_gprs_userspace_consumer = {
1082 .name = "reg-userspace-consumer",
1083 .id = 1,
1084 .dev = {
1085 .platform_data = &em_x270_gprs_consumer_data,
1086 }
1087};
1088
1089static struct platform_device *em_x270_userspace_consumers[] = {
1090 &em_x270_gps_userspace_consumer,
1091 &em_x270_gprs_userspace_consumer,
1092};
1093
1094static void __init em_x270_userspace_consumers_init(void)
1095{
1096 platform_add_devices(ARRAY_AND_SIZE(em_x270_userspace_consumers));
1097}
1098
1099
1100#define REGULATOR_CONSUMER(_name, _dev_name, _supply) \
1101 static struct regulator_consumer_supply _name##_consumers[] = { \
1102 REGULATOR_SUPPLY(_supply, _dev_name), \
1103 }
1104
1105REGULATOR_CONSUMER(ldo3, "reg-userspace-consumer.0", "vcc gps");
1106REGULATOR_CONSUMER(ldo5, NULL, "vcc cam");
1107REGULATOR_CONSUMER(ldo10, "pxa2xx-mci", "vcc sdio");
1108REGULATOR_CONSUMER(ldo12, NULL, "vcc usb");
1109REGULATOR_CONSUMER(ldo19, "reg-userspace-consumer.1", "vcc gprs");
1110REGULATOR_CONSUMER(buck2, NULL, "vcc_core");
1111
1112#define REGULATOR_INIT(_ldo, _min_uV, _max_uV, _ops_mask) \
1113 static struct regulator_init_data _ldo##_data = { \
1114 .constraints = { \
1115 .min_uV = _min_uV, \
1116 .max_uV = _max_uV, \
1117 .state_mem = { \
1118 .enabled = 0, \
1119 }, \
1120 .valid_ops_mask = _ops_mask, \
1121 .apply_uV = 1, \
1122 }, \
1123 .num_consumer_supplies = ARRAY_SIZE(_ldo##_consumers), \
1124 .consumer_supplies = _ldo##_consumers, \
1125 };
1126
1127REGULATOR_INIT(ldo3, 3200000, 3200000, REGULATOR_CHANGE_STATUS);
1128REGULATOR_INIT(ldo5, 3000000, 3000000, REGULATOR_CHANGE_STATUS);
1129REGULATOR_INIT(ldo10, 2000000, 3200000,
1130 REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE);
1131REGULATOR_INIT(ldo12, 3000000, 3000000, REGULATOR_CHANGE_STATUS);
1132REGULATOR_INIT(ldo19, 3200000, 3200000, REGULATOR_CHANGE_STATUS);
1133REGULATOR_INIT(buck2, 1000000, 1650000, REGULATOR_CHANGE_VOLTAGE);
1134
1135struct led_info em_x270_led_info = {
1136 .name = "em-x270:orange",
1137 .default_trigger = "battery-charging-or-full",
1138};
1139
1140struct power_supply_info em_x270_psy_info = {
1141 .name = "battery",
1142 .technology = POWER_SUPPLY_TECHNOLOGY_LIPO,
1143 .voltage_max_design = 4200000,
1144 .voltage_min_design = 3000000,
1145 .use_for_apm = 1,
1146};
1147
1148static void em_x270_battery_low(void)
1149{
1150#if defined(CONFIG_APM_EMULATION)
1151 apm_queue_event(APM_LOW_BATTERY);
1152#endif
1153}
1154
1155static void em_x270_battery_critical(void)
1156{
1157#if defined(CONFIG_APM_EMULATION)
1158 apm_queue_event(APM_CRITICAL_SUSPEND);
1159#endif
1160}
1161
1162struct da9030_battery_info em_x270_batterty_info = {
1163 .battery_info = &em_x270_psy_info,
1164
1165 .charge_milliamp = 1000,
1166 .charge_millivolt = 4200,
1167
1168 .vbat_low = 3600,
1169 .vbat_crit = 3400,
1170 .vbat_charge_start = 4100,
1171 .vbat_charge_stop = 4200,
1172 .vbat_charge_restart = 4000,
1173
1174 .vcharge_min = 3200,
1175 .vcharge_max = 5500,
1176
1177 .tbat_low = 197,
1178 .tbat_high = 78,
1179 .tbat_restart = 100,
1180
1181 .batmon_interval = 0,
1182
1183 .battery_low = em_x270_battery_low,
1184 .battery_critical = em_x270_battery_critical,
1185};
1186
1187#define DA9030_SUBDEV(_name, _id, _pdata) \
1188 { \
1189 .name = "da903x-" #_name, \
1190 .id = DA9030_ID_##_id, \
1191 .platform_data = _pdata, \
1192 }
1193
1194#define DA9030_LDO(num) DA9030_SUBDEV(regulator, LDO##num, &ldo##num##_data)
1195
1196struct da903x_subdev_info em_x270_da9030_subdevs[] = {
1197 DA9030_LDO(3),
1198 DA9030_LDO(5),
1199 DA9030_LDO(10),
1200 DA9030_LDO(12),
1201 DA9030_LDO(19),
1202
1203 DA9030_SUBDEV(regulator, BUCK2, &buck2_data),
1204
1205 DA9030_SUBDEV(led, LED_PC, &em_x270_led_info),
1206 DA9030_SUBDEV(backlight, WLED, &em_x270_led_info),
1207 DA9030_SUBDEV(battery, BAT, &em_x270_batterty_info),
1208};
1209
1210static struct da903x_platform_data em_x270_da9030_info = {
1211 .num_subdevs = ARRAY_SIZE(em_x270_da9030_subdevs),
1212 .subdevs = em_x270_da9030_subdevs,
1213};
1214
1215static struct i2c_board_info em_x270_i2c_pmic_info = {
1216 I2C_BOARD_INFO("da9030", 0x49),
1217 .irq = PXA_GPIO_TO_IRQ(0),
1218 .platform_data = &em_x270_da9030_info,
1219};
1220
1221static struct i2c_pxa_platform_data em_x270_pwr_i2c_info = {
1222 .use_pio = 1,
1223};
1224
1225static void __init em_x270_init_da9030(void)
1226{
1227 pxa27x_set_i2c_power_info(&em_x270_pwr_i2c_info);
1228 i2c_register_board_info(1, &em_x270_i2c_pmic_info, 1);
1229}
1230
1231static struct pca953x_platform_data exeda_gpio_ext_pdata = {
1232 .gpio_base = 128,
1233};
1234
1235static struct i2c_board_info exeda_i2c_info[] = {
1236 {
1237 I2C_BOARD_INFO("pca9555", 0x21),
1238 .platform_data = &exeda_gpio_ext_pdata,
1239 },
1240};
1241
1242static struct i2c_pxa_platform_data em_x270_i2c_info = {
1243 .fast_mode = 1,
1244};
1245
1246static void __init em_x270_init_i2c(void)
1247{
1248 pxa_set_i2c_info(&em_x270_i2c_info);
1249
1250 if (machine_is_exeda())
1251 i2c_register_board_info(0, ARRAY_AND_SIZE(exeda_i2c_info));
1252}
1253
1254static void __init em_x270_module_init(void)
1255{
1256 pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_pin_config));
1257
1258 mmc_cd = GPIO13_MMC_CD;
1259 nand_rb = GPIO56_NAND_RB;
1260 dm9000_flags = DM9000_PLATF_32BITONLY;
1261 cam_reset = GPIO93_CAM_RESET;
1262 usb_hub_reset = GPIO16_USB_HUB_RESET;
1263}
1264
1265static void __init em_x270_exeda_init(void)
1266{
1267 pxa2xx_mfp_config(ARRAY_AND_SIZE(exeda_pin_config));
1268
1269 mmc_cd = GPIO114_MMC_CD;
1270 nand_rb = GPIO20_NAND_RB;
1271 dm9000_flags = DM9000_PLATF_16BITONLY;
1272 cam_reset = GPIO130_CAM_RESET;
1273 usb_hub_reset = GPIO10_USB_HUB_RESET;
1274}
1275
1276static void __init em_x270_init(void)
1277{
1278 pxa2xx_mfp_config(ARRAY_AND_SIZE(common_pin_config));
1279
1280 pxa_set_ffuart_info(NULL);
1281 pxa_set_btuart_info(NULL);
1282 pxa_set_stuart_info(NULL);
1283
1284#ifdef CONFIG_PM
1285 pxa27x_set_pwrmode(PWRMODE_DEEPSLEEP);
1286#endif
1287
1288 if (machine_is_em_x270())
1289 em_x270_module_init();
1290 else if (machine_is_exeda())
1291 em_x270_exeda_init();
1292 else
1293 panic("Unsupported machine: %d\n", machine_arch_type);
1294
1295 em_x270_init_da9030();
1296 em_x270_init_dm9000();
1297 em_x270_init_rtc();
1298 em_x270_init_nand();
1299 em_x270_init_nor();
1300 em_x270_init_lcd();
1301 em_x270_init_mmc();
1302 em_x270_init_ohci();
1303 em_x270_init_keypad();
1304 em_x270_init_gpio_keys();
1305 em_x270_init_ac97();
1306 em_x270_init_spi();
1307 em_x270_init_i2c();
1308 em_x270_init_camera();
1309 em_x270_userspace_consumers_init();
1310}
1311
1312MACHINE_START(EM_X270, "Compulab EM-X270")
1313 .atag_offset = 0x100,
1314 .map_io = pxa27x_map_io,
1315 .nr_irqs = PXA_NR_IRQS,
1316 .init_irq = pxa27x_init_irq,
1317 .handle_irq = pxa27x_handle_irq,
1318 .init_time = pxa_timer_init,
1319 .init_machine = em_x270_init,
1320 .restart = pxa_restart,
1321MACHINE_END
1322
1323MACHINE_START(EXEDA, "Compulab eXeda")
1324 .atag_offset = 0x100,
1325 .map_io = pxa27x_map_io,
1326 .nr_irqs = PXA_NR_IRQS,
1327 .init_irq = pxa27x_init_irq,
1328 .handle_irq = pxa27x_handle_irq,
1329 .init_time = pxa_timer_init,
1330 .init_machine = em_x270_init,
1331 .restart = pxa_restart,
1332MACHINE_END
1333
