linux/arch/microblaze/mm/init.c
<<
>>
Prefs
   1/*
   2 * Copyright (C) 2007-2008 Michal Simek <monstr@monstr.eu>
   3 * Copyright (C) 2006 Atmark Techno, Inc.
   4 *
   5 * This file is subject to the terms and conditions of the GNU General Public
   6 * License. See the file "COPYING" in the main directory of this archive
   7 * for more details.
   8 */
   9
  10#include <linux/bootmem.h>
  11#include <linux/init.h>
  12#include <linux/kernel.h>
  13#include <linux/memblock.h>
  14#include <linux/mm.h> /* mem_init */
  15#include <linux/initrd.h>
  16#include <linux/pagemap.h>
  17#include <linux/pfn.h>
  18#include <linux/slab.h>
  19#include <linux/swap.h>
  20#include <linux/export.h>
  21
  22#include <asm/page.h>
  23#include <asm/mmu_context.h>
  24#include <asm/pgalloc.h>
  25#include <asm/sections.h>
  26#include <asm/tlb.h>
  27#include <asm/fixmap.h>
  28
  29/* Use for MMU and noMMU because of PCI generic code */
  30int mem_init_done;
  31
  32#ifndef CONFIG_MMU
  33unsigned int __page_offset;
  34EXPORT_SYMBOL(__page_offset);
  35
  36#else
  37static int init_bootmem_done;
  38#endif /* CONFIG_MMU */
  39
  40char *klimit = _end;
  41
  42/*
  43 * Initialize the bootmem system and give it all the memory we
  44 * have available.
  45 */
  46unsigned long memory_start;
  47EXPORT_SYMBOL(memory_start);
  48unsigned long memory_size;
  49EXPORT_SYMBOL(memory_size);
  50unsigned long lowmem_size;
  51
  52#ifdef CONFIG_HIGHMEM
  53pte_t *kmap_pte;
  54EXPORT_SYMBOL(kmap_pte);
  55pgprot_t kmap_prot;
  56EXPORT_SYMBOL(kmap_prot);
  57
  58static inline pte_t *virt_to_kpte(unsigned long vaddr)
  59{
  60        return pte_offset_kernel(pmd_offset(pgd_offset_k(vaddr),
  61                        vaddr), vaddr);
  62}
  63
  64static void __init highmem_init(void)
  65{
  66        pr_debug("%x\n", (u32)PKMAP_BASE);
  67        map_page(PKMAP_BASE, 0, 0);     /* XXX gross */
  68        pkmap_page_table = virt_to_kpte(PKMAP_BASE);
  69
  70        kmap_pte = virt_to_kpte(__fix_to_virt(FIX_KMAP_BEGIN));
  71        kmap_prot = PAGE_KERNEL;
  72}
  73
  74static void highmem_setup(void)
  75{
  76        unsigned long pfn;
  77
  78        for (pfn = max_low_pfn; pfn < max_pfn; ++pfn) {
  79                struct page *page = pfn_to_page(pfn);
  80
  81                /* FIXME not sure about */
  82                if (!memblock_is_reserved(pfn << PAGE_SHIFT))
  83                        free_highmem_page(page);
  84        }
  85}
  86#endif /* CONFIG_HIGHMEM */
  87
  88/*
  89 * paging_init() sets up the page tables - in fact we've already done this.
  90 */
  91static void __init paging_init(void)
  92{
  93        unsigned long zones_size[MAX_NR_ZONES];
  94#ifdef CONFIG_MMU
  95        int idx;
  96
  97        /* Setup fixmaps */
  98        for (idx = 0; idx < __end_of_fixed_addresses; idx++)
  99                clear_fixmap(idx);
 100#endif
 101
 102        /* Clean every zones */
 103        memset(zones_size, 0, sizeof(zones_size));
 104
 105#ifdef CONFIG_HIGHMEM
 106        highmem_init();
 107
 108        zones_size[ZONE_DMA] = max_low_pfn;
 109        zones_size[ZONE_HIGHMEM] = max_pfn;
 110#else
 111        zones_size[ZONE_DMA] = max_pfn;
 112#endif
 113
 114        /* We don't have holes in memory map */
 115        free_area_init_nodes(zones_size);
 116}
 117
 118void __init setup_memory(void)
 119{
 120        unsigned long map_size;
 121        struct memblock_region *reg;
 122
 123#ifndef CONFIG_MMU
 124        u32 kernel_align_start, kernel_align_size;
 125
 126        /* Find main memory where is the kernel */
 127        for_each_memblock(memory, reg) {
 128                memory_start = (u32)reg->base;
 129                lowmem_size = reg->size;
 130                if ((memory_start <= (u32)_text) &&
 131                        ((u32)_text <= (memory_start + lowmem_size - 1))) {
 132                        memory_size = lowmem_size;
 133                        PAGE_OFFSET = memory_start;
 134                        pr_info("%s: Main mem: 0x%x, size 0x%08x\n",
 135                                __func__, (u32) memory_start,
 136                                        (u32) memory_size);
 137                        break;
 138                }
 139        }
 140
 141        if (!memory_start || !memory_size) {
 142                panic("%s: Missing memory setting 0x%08x, size=0x%08x\n",
 143                        __func__, (u32) memory_start, (u32) memory_size);
 144        }
 145
 146        /* reservation of region where is the kernel */
 147        kernel_align_start = PAGE_DOWN((u32)_text);
 148        /* ALIGN can be remove because _end in vmlinux.lds.S is align */
 149        kernel_align_size = PAGE_UP((u32)klimit) - kernel_align_start;
 150        pr_info("%s: kernel addr:0x%08x-0x%08x size=0x%08x\n",
 151                __func__, kernel_align_start, kernel_align_start
 152                        + kernel_align_size, kernel_align_size);
 153        memblock_reserve(kernel_align_start, kernel_align_size);
 154#endif
 155        /*
 156         * Kernel:
 157         * start: base phys address of kernel - page align
 158         * end: base phys address of kernel - page align
 159         *
 160         * min_low_pfn - the first page (mm/bootmem.c - node_boot_start)
 161         * max_low_pfn
 162         * max_mapnr - the first unused page (mm/bootmem.c - node_low_pfn)
 163         */
 164
 165        /* memory start is from the kernel end (aligned) to higher addr */
 166        min_low_pfn = memory_start >> PAGE_SHIFT; /* minimum for allocation */
 167        /* RAM is assumed contiguous */
 168        max_mapnr = memory_size >> PAGE_SHIFT;
 169        max_low_pfn = ((u64)memory_start + (u64)lowmem_size) >> PAGE_SHIFT;
 170        max_pfn = ((u64)memory_start + (u64)memory_size) >> PAGE_SHIFT;
 171
 172        pr_info("%s: max_mapnr: %#lx\n", __func__, max_mapnr);
 173        pr_info("%s: min_low_pfn: %#lx\n", __func__, min_low_pfn);
 174        pr_info("%s: max_low_pfn: %#lx\n", __func__, max_low_pfn);
 175        pr_info("%s: max_pfn: %#lx\n", __func__, max_pfn);
 176
 177        /*
 178         * Find an area to use for the bootmem bitmap.
 179         * We look for the first area which is at least
 180         * 128kB in length (128kB is enough for a bitmap
 181         * for 4GB of memory, using 4kB pages), plus 1 page
 182         * (in case the address isn't page-aligned).
 183         */
 184        map_size = init_bootmem_node(NODE_DATA(0),
 185                PFN_UP(TOPHYS((u32)klimit)), min_low_pfn, max_low_pfn);
 186        memblock_reserve(PFN_UP(TOPHYS((u32)klimit)) << PAGE_SHIFT, map_size);
 187
 188        /* Add active regions with valid PFNs */
 189        for_each_memblock(memory, reg) {
 190                unsigned long start_pfn, end_pfn;
 191
 192                start_pfn = memblock_region_memory_base_pfn(reg);
 193                end_pfn = memblock_region_memory_end_pfn(reg);
 194                memblock_set_node(start_pfn << PAGE_SHIFT,
 195                                        (end_pfn - start_pfn) << PAGE_SHIFT, 0);
 196        }
 197
 198        /* free bootmem is whole main memory */
 199        free_bootmem_with_active_regions(0, max_low_pfn);
 200
 201        /* reserve allocate blocks */
 202        for_each_memblock(reserved, reg) {
 203                unsigned long top = reg->base + reg->size - 1;
 204
 205                pr_debug("reserved - 0x%08x-0x%08x, %lx, %lx\n",
 206                         (u32) reg->base, (u32) reg->size, top,
 207                                                memory_start + lowmem_size - 1);
 208
 209                if (top <= (memory_start + lowmem_size - 1)) {
 210                        reserve_bootmem(reg->base, reg->size, BOOTMEM_DEFAULT);
 211                } else if (reg->base < (memory_start + lowmem_size - 1)) {
 212                        unsigned long trunc_size = memory_start + lowmem_size -
 213                                                                reg->base;
 214                        reserve_bootmem(reg->base, trunc_size, BOOTMEM_DEFAULT);
 215                }
 216        }
 217
 218        /* XXX need to clip this if using highmem? */
 219        sparse_memory_present_with_active_regions(0);
 220
 221#ifdef CONFIG_MMU
 222        init_bootmem_done = 1;
 223#endif
 224        paging_init();
 225}
 226
 227#ifdef CONFIG_BLK_DEV_INITRD
 228void free_initrd_mem(unsigned long start, unsigned long end)
 229{
 230        free_reserved_area((void *)start, (void *)end, -1, "initrd");
 231}
 232#endif
 233
 234void free_initmem(void)
 235{
 236        free_initmem_default(-1);
 237}
 238
 239void __init mem_init(void)
 240{
 241        high_memory = (void *)__va(memory_start + lowmem_size - 1);
 242
 243        /* this will put all memory onto the freelists */
 244        free_all_bootmem();
 245#ifdef CONFIG_HIGHMEM
 246        highmem_setup();
 247#endif
 248
 249        mem_init_print_info(NULL);
 250#ifdef CONFIG_MMU
 251        pr_info("Kernel virtual memory layout:\n");
 252        pr_info("  * 0x%08lx..0x%08lx  : fixmap\n", FIXADDR_START, FIXADDR_TOP);
 253#ifdef CONFIG_HIGHMEM
 254        pr_info("  * 0x%08lx..0x%08lx  : highmem PTEs\n",
 255                PKMAP_BASE, PKMAP_ADDR(LAST_PKMAP));
 256#endif /* CONFIG_HIGHMEM */
 257        pr_info("  * 0x%08lx..0x%08lx  : early ioremap\n",
 258                ioremap_bot, ioremap_base);
 259        pr_info("  * 0x%08lx..0x%08lx  : vmalloc & ioremap\n",
 260                (unsigned long)VMALLOC_START, VMALLOC_END);
 261#endif
 262        mem_init_done = 1;
 263}
 264
 265#ifndef CONFIG_MMU
 266int page_is_ram(unsigned long pfn)
 267{
 268        return __range_ok(pfn, 0);
 269}
 270#else
 271int page_is_ram(unsigned long pfn)
 272{
 273        return pfn < max_low_pfn;
 274}
 275
 276/*
 277 * Check for command-line options that affect what MMU_init will do.
 278 */
 279static void mm_cmdline_setup(void)
 280{
 281        unsigned long maxmem = 0;
 282        char *p = cmd_line;
 283
 284        /* Look for mem= option on command line */
 285        p = strstr(cmd_line, "mem=");
 286        if (p) {
 287                p += 4;
 288                maxmem = memparse(p, &p);
 289                if (maxmem && memory_size > maxmem) {
 290                        memory_size = maxmem;
 291                        memblock.memory.regions[0].size = memory_size;
 292                }
 293        }
 294}
 295
 296/*
 297 * MMU_init_hw does the chip-specific initialization of the MMU hardware.
 298 */
 299static void __init mmu_init_hw(void)
 300{
 301        /*
 302         * The Zone Protection Register (ZPR) defines how protection will
 303         * be applied to every page which is a member of a given zone. At
 304         * present, we utilize only two of the zones.
 305         * The zone index bits (of ZSEL) in the PTE are used for software
 306         * indicators, except the LSB.  For user access, zone 1 is used,
 307         * for kernel access, zone 0 is used.  We set all but zone 1
 308         * to zero, allowing only kernel access as indicated in the PTE.
 309         * For zone 1, we set a 01 binary (a value of 10 will not work)
 310         * to allow user access as indicated in the PTE.  This also allows
 311         * kernel access as indicated in the PTE.
 312         */
 313        __asm__ __volatile__ ("ori r11, r0, 0x10000000;" \
 314                        "mts rzpr, r11;"
 315                        : : : "r11");
 316}
 317
 318/*
 319 * MMU_init sets up the basic memory mappings for the kernel,
 320 * including both RAM and possibly some I/O regions,
 321 * and sets up the page tables and the MMU hardware ready to go.
 322 */
 323
 324/* called from head.S */
 325asmlinkage void __init mmu_init(void)
 326{
 327        unsigned int kstart, ksize;
 328
 329        if (!memblock.reserved.cnt) {
 330                pr_emerg("Error memory count\n");
 331                machine_restart(NULL);
 332        }
 333
 334        if ((u32) memblock.memory.regions[0].size < 0x400000) {
 335                pr_emerg("Memory must be greater than 4MB\n");
 336                machine_restart(NULL);
 337        }
 338
 339        if ((u32) memblock.memory.regions[0].size < kernel_tlb) {
 340                pr_emerg("Kernel size is greater than memory node\n");
 341                machine_restart(NULL);
 342        }
 343
 344        /* Find main memory where the kernel is */
 345        memory_start = (u32) memblock.memory.regions[0].base;
 346        lowmem_size = memory_size = (u32) memblock.memory.regions[0].size;
 347
 348        if (lowmem_size > CONFIG_LOWMEM_SIZE) {
 349                lowmem_size = CONFIG_LOWMEM_SIZE;
 350#ifndef CONFIG_HIGHMEM
 351                memory_size = lowmem_size;
 352#endif
 353        }
 354
 355        mm_cmdline_setup(); /* FIXME parse args from command line - not used */
 356
 357        /*
 358         * Map out the kernel text/data/bss from the available physical
 359         * memory.
 360         */
 361        kstart = __pa(CONFIG_KERNEL_START); /* kernel start */
 362        /* kernel size */
 363        ksize = PAGE_ALIGN(((u32)_end - (u32)CONFIG_KERNEL_START));
 364        memblock_reserve(kstart, ksize);
 365
 366#if defined(CONFIG_BLK_DEV_INITRD)
 367        /* Remove the init RAM disk from the available memory. */
 368        if (initrd_start) {
 369                unsigned long size;
 370                size = initrd_end - initrd_start;
 371                memblock_reserve(virt_to_phys(initrd_start), size);
 372        }
 373#endif /* CONFIG_BLK_DEV_INITRD */
 374
 375        /* Initialize the MMU hardware */
 376        mmu_init_hw();
 377
 378        /* Map in all of RAM starting at CONFIG_KERNEL_START */
 379        mapin_ram();
 380
 381        /* Extend vmalloc and ioremap area as big as possible */
 382#ifdef CONFIG_HIGHMEM
 383        ioremap_base = ioremap_bot = PKMAP_BASE;
 384#else
 385        ioremap_base = ioremap_bot = FIXADDR_START;
 386#endif
 387
 388        /* Initialize the context management stuff */
 389        mmu_context_init();
 390
 391        /* Shortly after that, the entire linear mapping will be available */
 392        /* This will also cause that unflatten device tree will be allocated
 393         * inside 768MB limit */
 394        memblock_set_current_limit(memory_start + lowmem_size - 1);
 395}
 396
 397/* This is only called until mem_init is done. */
 398void __init *early_get_page(void)
 399{
 400        void *p;
 401        if (init_bootmem_done) {
 402                p = alloc_bootmem_pages(PAGE_SIZE);
 403        } else {
 404                /*
 405                 * Mem start + kernel_tlb -> here is limit
 406                 * because of mem mapping from head.S
 407                 */
 408                p = __va(memblock_alloc_base(PAGE_SIZE, PAGE_SIZE,
 409                                        memory_start + kernel_tlb));
 410        }
 411        return p;
 412}
 413
 414#endif /* CONFIG_MMU */
 415
 416void * __init_refok alloc_maybe_bootmem(size_t size, gfp_t mask)
 417{
 418        if (mem_init_done)
 419                return kmalloc(size, mask);
 420        else
 421                return alloc_bootmem(size);
 422}
 423
 424void * __init_refok zalloc_maybe_bootmem(size_t size, gfp_t mask)
 425{
 426        void *p;
 427
 428        if (mem_init_done)
 429                p = kzalloc(size, mask);
 430        else {
 431                p = alloc_bootmem(size);
 432                if (p)
 433                        memset(p, 0, size);
 434        }
 435        return p;
 436}
 437