1/* 2 * P1022 RDK 32-bit Physical Address Map Device Tree Source 3 * 4 * Copyright 2012 Freescale Semiconductor Inc. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions are met: 8 * * Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * * Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * * Neither the name of Freescale Semiconductor nor the 14 * names of its contributors may be used to endorse or promote products 15 * derived from this software without specific prior written permission. 16 * 17 * 18 * ALTERNATIVELY, this software may be distributed under the terms of the 19 * GNU General Public License ("GPL") as published by the Free Software 20 * Foundation, either version 2 of that License or (at your option) any 21 * later version. 22 * 23 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY 24 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 25 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 26 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY 27 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 28 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 29 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND 30 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 32 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 33 */ 34 35/include/ "fsl/p1022si-pre.dtsi" 36/ { 37 model = "fsl,P1022RDK"; 38 compatible = "fsl,P1022RDK"; 39 40 memory { 41 device_type = "memory"; 42 }; 43 44 board_lbc: lbc: localbus@ffe05000 { 45 /* The P1022 RDK does not have any localbus devices */ 46 status = "disabled"; 47 }; 48 49 board_soc: soc: soc@ffe00000 { 50 ranges = <0x0 0x0 0xffe00000 0x100000>; 51 52 i2c@3100 { 53 wm8960:codec@1a { 54 compatible = "wlf,wm8960"; 55 reg = <0x1a>; 56 /* MCLK source is a stand-alone oscillator */ 57 clock-frequency = <12288000>; 58 }; 59 rtc@68 { 60 compatible = "stm,m41t62"; 61 reg = <0x68>; 62 }; 63 adt7461@4c{ 64 compatible = "adi,adt7461"; 65 reg = <0x4c>; 66 }; 67 zl6100@21{ 68 compatible = "isil,zl6100"; 69 reg = <0x21>; 70 }; 71 zl6100@24{ 72 compatible = "isil,zl6100"; 73 reg = <0x24>; 74 }; 75 zl6100@26{ 76 compatible = "isil,zl6100"; 77 reg = <0x26>; 78 }; 79 zl6100@29{ 80 compatible = "isil,zl6100"; 81 reg = <0x29>; 82 }; 83 }; 84 85 spi@7000 { 86 flash@0 { 87 #address-cells = <1>; 88 #size-cells = <1>; 89 compatible = "spansion,m25p80"; 90 reg = <0>; 91 spi-max-frequency = <1000000>; 92 partition@0 { 93 label = "full-spi-flash"; 94 reg = <0x00000000 0x00100000>; 95 }; 96 }; 97 }; 98 99 ssi@15000 { 100 fsl,mode = "i2s-slave"; 101 codec-handle = <&wm8960>; 102 }; 103 104 usb@22000 { 105 phy_type = "ulpi"; 106 }; 107 108 usb@23000 { 109 phy_type = "ulpi"; 110 }; 111 112 mdio@24000 { 113 phy0: ethernet-phy@0 { 114 interrupts = <3 1 0 0>; 115 reg = <0x1>; 116 }; 117 phy1: ethernet-phy@1 { 118 interrupts = <9 1 0 0>; 119 reg = <0x2>; 120 }; 121 }; 122 123 mdio@25000 { 124 tbi0: tbi-phy@11 { 125 reg = <0x11>; 126 device_type = "tbi-phy"; 127 }; 128 }; 129 130 ethernet@b0000 { 131 phy-handle = <&phy0>; 132 phy-connection-type = "rgmii-id"; 133 }; 134 135 ethernet@b1000 { 136 phy-handle = <&phy1>; 137 tbi-handle = <&tbi0>; 138 phy-connection-type = "sgmii"; 139 }; 140 }; 141 142 pci0: pcie@ffe09000 { 143 ranges = <0x2000000 0x0 0xe0000000 0 0xa0000000 0x0 0x20000000 144 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; 145 reg = <0x0 0xffe09000 0 0x1000>; 146 pcie@0 { 147 ranges = <0x2000000 0x0 0xe0000000 148 0x2000000 0x0 0xe0000000 149 0x0 0x20000000 150 151 0x1000000 0x0 0x0 152 0x1000000 0x0 0x0 153 0x0 0x100000>; 154 }; 155 }; 156 157 pci1: pcie@ffe0a000 { 158 ranges = <0x2000000 0x0 0xe0000000 0 0xc0000000 0x0 0x20000000 159 0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>; 160 reg = <0 0xffe0a000 0 0x1000>; 161 pcie@0 { 162 ranges = <0x2000000 0x0 0xe0000000 163 0x2000000 0x0 0xe0000000 164 0x0 0x20000000 165 166 0x1000000 0x0 0x0 167 0x1000000 0x0 0x0 168 0x0 0x100000>; 169 }; 170 }; 171 172 pci2: pcie@ffe0b000 { 173 ranges = <0x2000000 0x0 0xe0000000 0 0x80000000 0x0 0x20000000 174 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; 175 reg = <0 0xffe0b000 0 0x1000>; 176 pcie@0 { 177 ranges = <0x2000000 0x0 0xe0000000 178 0x2000000 0x0 0xe0000000 179 0x0 0x20000000 180 181 0x1000000 0x0 0x0 182 0x1000000 0x0 0x0 183 0x0 0x100000>; 184 }; 185 }; 186}; 187 188/include/ "fsl/p1022si-post.dtsi" 189