LXR linux/arch/powerpc/platforms/52xx/mpc5200

   1/*
   2 * Support for 'mpc5200-simple-platform' compatible boards.
   3 *
   4 * Written by Marian Balakowicz <m8@semihalf.com>
   5 * Copyright (C) 2007 Semihalf
   6 *
   7 * This program is free software; you can redistribute  it and/or modify it
   8 * under  the terms of  the GNU General  Public License as published by the
   9 * Free Software Foundation;  either version 2 of the  License, or (at your
  10 * option) any later version.
  11 *
  12 * Description:
  13 * This code implements support for a simple MPC52xx based boards which
  14 * do not need a custom platform specific setup. Such boards are
  15 * supported assuming the following:
  16 *
  17 * - GPIO pins are configured by the firmware,
  18 * - CDM configuration (clocking) is setup correctly by firmware,
  19 * - if the 'fsl,has-wdt' property is present in one of the
  20 *   gpt nodes, then it is safe to use such gpt to reset the board,
  21 * - PCI is supported if enabled in the kernel configuration
  22 *   and if there is a PCI bus node defined in the device tree.
  23 *
  24 * Boards that are compatible with this generic platform support
  25 * are listed in a 'board' table.
  26 */
  27
  28#undef DEBUG
  29#include <asm/time.h>
  30#include <asm/prom.h>
  31#include <asm/machdep.h>
  32#include <asm/mpc52xx.h>
  33
  34/*
  35 * Setup the architecture
  36 */
  37static void __init mpc5200_simple_setup_arch(void)
  38{
  39        if (ppc_md.progress)
  40                ppc_md.progress("mpc5200_simple_setup_arch()", 0);
  41
  42        /* Map important registers from the internal memory map */
  43        mpc52xx_map_common_devices();
  44
  45        /* Some mpc5200 & mpc5200b related configuration */
  46        mpc5200_setup_xlb_arbiter();
  47
  48        mpc52xx_setup_pci();
  49}
  50
  51/* list of the supported boards */
  52static const char *board[] __initdata = {
  53        "anonymous,a3m071",
  54        "anonymous,a4m072",
  55        "anon,charon",
  56        "ifm,o2d",
  57        "intercontrol,digsy-mtc",
  58        "manroland,mucmc52",
  59        "manroland,uc101",
  60        "phytec,pcm030",
  61        "phytec,pcm032",
  62        "promess,motionpro",
  63        "schindler,cm5200",
  64        "tqc,tqm5200",
  65        NULL
  66};
  67
  68/*
  69 * Called very early, MMU is off, device-tree isn't unflattened
  70 */
  71static int __init mpc5200_simple_probe(void)
  72{
  73        return of_flat_dt_match(of_get_flat_dt_root(), board);
  74}
  75
  76define_machine(mpc5200_simple_platform) {
  77        .name           = "mpc5200-simple-platform",
  78        .probe          = mpc5200_simple_probe,
  79        .setup_arch     = mpc5200_simple_setup_arch,
  80        .init           = mpc52xx_declare_of_platform_devices,
  81        .init_IRQ       = mpc52xx_init_irq,
  82        .get_irq        = mpc52xx_get_irq,
  83        .restart        = mpc52xx_restart,
  84        .calibrate_decr = generic_calibrate_decr,
  85};
  86