linux/drivers/i2c/busses/i2c-eg20t.c
<<
>>
Prefs
   1/*
   2 * Copyright (C) 2011 LAPIS Semiconductor Co., Ltd.
   3 *
   4 * This program is free software; you can redistribute it and/or modify
   5 * it under the terms of the GNU General Public License as published by
   6 * the Free Software Foundation; version 2 of the License.
   7 *
   8 * This program is distributed in the hope that it will be useful,
   9 * but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  11 * GNU General Public License for more details.
  12 *
  13 * You should have received a copy of the GNU General Public License
  14 * along with this program; if not, write to the Free Software
  15 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  16 */
  17
  18#include <linux/module.h>
  19#include <linux/kernel.h>
  20#include <linux/delay.h>
  21#include <linux/init.h>
  22#include <linux/errno.h>
  23#include <linux/i2c.h>
  24#include <linux/fs.h>
  25#include <linux/io.h>
  26#include <linux/types.h>
  27#include <linux/interrupt.h>
  28#include <linux/jiffies.h>
  29#include <linux/pci.h>
  30#include <linux/mutex.h>
  31#include <linux/ktime.h>
  32#include <linux/slab.h>
  33
  34#define PCH_EVENT_SET   0       /* I2C Interrupt Event Set Status */
  35#define PCH_EVENT_NONE  1       /* I2C Interrupt Event Clear Status */
  36#define PCH_MAX_CLK             100000  /* Maximum Clock speed in MHz */
  37#define PCH_BUFFER_MODE_ENABLE  0x0002  /* flag for Buffer mode enable */
  38#define PCH_EEPROM_SW_RST_MODE_ENABLE   0x0008  /* EEPROM SW RST enable flag */
  39
  40#define PCH_I2CSADR     0x00    /* I2C slave address register */
  41#define PCH_I2CCTL      0x04    /* I2C control register */
  42#define PCH_I2CSR       0x08    /* I2C status register */
  43#define PCH_I2CDR       0x0C    /* I2C data register */
  44#define PCH_I2CMON      0x10    /* I2C bus monitor register */
  45#define PCH_I2CBC       0x14    /* I2C bus transfer rate setup counter */
  46#define PCH_I2CMOD      0x18    /* I2C mode register */
  47#define PCH_I2CBUFSLV   0x1C    /* I2C buffer mode slave address register */
  48#define PCH_I2CBUFSUB   0x20    /* I2C buffer mode subaddress register */
  49#define PCH_I2CBUFFOR   0x24    /* I2C buffer mode format register */
  50#define PCH_I2CBUFCTL   0x28    /* I2C buffer mode control register */
  51#define PCH_I2CBUFMSK   0x2C    /* I2C buffer mode interrupt mask register */
  52#define PCH_I2CBUFSTA   0x30    /* I2C buffer mode status register */
  53#define PCH_I2CBUFLEV   0x34    /* I2C buffer mode level register */
  54#define PCH_I2CESRFOR   0x38    /* EEPROM software reset mode format register */
  55#define PCH_I2CESRCTL   0x3C    /* EEPROM software reset mode ctrl register */
  56#define PCH_I2CESRMSK   0x40    /* EEPROM software reset mode */
  57#define PCH_I2CESRSTA   0x44    /* EEPROM software reset mode status register */
  58#define PCH_I2CTMR      0x48    /* I2C timer register */
  59#define PCH_I2CSRST     0xFC    /* I2C reset register */
  60#define PCH_I2CNF       0xF8    /* I2C noise filter register */
  61
  62#define BUS_IDLE_TIMEOUT        20
  63#define PCH_I2CCTL_I2CMEN       0x0080
  64#define TEN_BIT_ADDR_DEFAULT    0xF000
  65#define TEN_BIT_ADDR_MASK       0xF0
  66#define PCH_START               0x0020
  67#define PCH_RESTART             0x0004
  68#define PCH_ESR_START           0x0001
  69#define PCH_BUFF_START          0x1
  70#define PCH_REPSTART            0x0004
  71#define PCH_ACK                 0x0008
  72#define PCH_GETACK              0x0001
  73#define CLR_REG                 0x0
  74#define I2C_RD                  0x1
  75#define I2CMCF_BIT              0x0080
  76#define I2CMIF_BIT              0x0002
  77#define I2CMAL_BIT              0x0010
  78#define I2CBMFI_BIT             0x0001
  79#define I2CBMAL_BIT             0x0002
  80#define I2CBMNA_BIT             0x0004
  81#define I2CBMTO_BIT             0x0008
  82#define I2CBMIS_BIT             0x0010
  83#define I2CESRFI_BIT            0X0001
  84#define I2CESRTO_BIT            0x0002
  85#define I2CESRFIIE_BIT          0x1
  86#define I2CESRTOIE_BIT          0x2
  87#define I2CBMDZ_BIT             0x0040
  88#define I2CBMAG_BIT             0x0020
  89#define I2CMBB_BIT              0x0020
  90#define BUFFER_MODE_MASK        (I2CBMFI_BIT | I2CBMAL_BIT | I2CBMNA_BIT | \
  91                                I2CBMTO_BIT | I2CBMIS_BIT)
  92#define I2C_ADDR_MSK            0xFF
  93#define I2C_MSB_2B_MSK          0x300
  94#define FAST_MODE_CLK           400
  95#define FAST_MODE_EN            0x0001
  96#define SUB_ADDR_LEN_MAX        4
  97#define BUF_LEN_MAX             32
  98#define PCH_BUFFER_MODE         0x1
  99#define EEPROM_SW_RST_MODE      0x0002
 100#define NORMAL_INTR_ENBL        0x0300
 101#define EEPROM_RST_INTR_ENBL    (I2CESRFIIE_BIT | I2CESRTOIE_BIT)
 102#define EEPROM_RST_INTR_DISBL   0x0
 103#define BUFFER_MODE_INTR_ENBL   0x001F
 104#define BUFFER_MODE_INTR_DISBL  0x0
 105#define NORMAL_MODE             0x0
 106#define BUFFER_MODE             0x1
 107#define EEPROM_SR_MODE          0x2
 108#define I2C_TX_MODE             0x0010
 109#define PCH_BUF_TX              0xFFF7
 110#define PCH_BUF_RD              0x0008
 111#define I2C_ERROR_MASK  (I2CESRTO_EVENT | I2CBMIS_EVENT | I2CBMTO_EVENT | \
 112                        I2CBMNA_EVENT | I2CBMAL_EVENT | I2CMAL_EVENT)
 113#define I2CMAL_EVENT            0x0001
 114#define I2CMCF_EVENT            0x0002
 115#define I2CBMFI_EVENT           0x0004
 116#define I2CBMAL_EVENT           0x0008
 117#define I2CBMNA_EVENT           0x0010
 118#define I2CBMTO_EVENT           0x0020
 119#define I2CBMIS_EVENT           0x0040
 120#define I2CESRFI_EVENT          0x0080
 121#define I2CESRTO_EVENT          0x0100
 122#define PCI_DEVICE_ID_PCH_I2C   0x8817
 123
 124#define pch_dbg(adap, fmt, arg...)  \
 125        dev_dbg(adap->pch_adapter.dev.parent, "%s :" fmt, __func__, ##arg)
 126
 127#define pch_err(adap, fmt, arg...)  \
 128        dev_err(adap->pch_adapter.dev.parent, "%s :" fmt, __func__, ##arg)
 129
 130#define pch_pci_err(pdev, fmt, arg...)  \
 131        dev_err(&pdev->dev, "%s :" fmt, __func__, ##arg)
 132
 133#define pch_pci_dbg(pdev, fmt, arg...)  \
 134        dev_dbg(&pdev->dev, "%s :" fmt, __func__, ##arg)
 135
 136/*
 137Set the number of I2C instance max
 138Intel EG20T PCH :               1ch
 139LAPIS Semiconductor ML7213 IOH :        2ch
 140LAPIS Semiconductor ML7831 IOH :        1ch
 141*/
 142#define PCH_I2C_MAX_DEV                 2
 143
 144/**
 145 * struct i2c_algo_pch_data - for I2C driver functionalities
 146 * @pch_adapter:                stores the reference to i2c_adapter structure
 147 * @p_adapter_info:             stores the reference to adapter_info structure
 148 * @pch_base_address:           specifies the remapped base address
 149 * @pch_buff_mode_en:           specifies if buffer mode is enabled
 150 * @pch_event_flag:             specifies occurrence of interrupt events
 151 * @pch_i2c_xfer_in_progress:   specifies whether the transfer is completed
 152 */
 153struct i2c_algo_pch_data {
 154        struct i2c_adapter pch_adapter;
 155        struct adapter_info *p_adapter_info;
 156        void __iomem *pch_base_address;
 157        int pch_buff_mode_en;
 158        u32 pch_event_flag;
 159        bool pch_i2c_xfer_in_progress;
 160};
 161
 162/**
 163 * struct adapter_info - This structure holds the adapter information for the
 164                         PCH i2c controller
 165 * @pch_data:           stores a list of i2c_algo_pch_data
 166 * @pch_i2c_suspended:  specifies whether the system is suspended or not
 167 *                      perhaps with more lines and words.
 168 * @ch_num:             specifies the number of i2c instance
 169 *
 170 * pch_data has as many elements as maximum I2C channels
 171 */
 172struct adapter_info {
 173        struct i2c_algo_pch_data pch_data[PCH_I2C_MAX_DEV];
 174        bool pch_i2c_suspended;
 175        int ch_num;
 176};
 177
 178
 179static int pch_i2c_speed = 100; /* I2C bus speed in Kbps */
 180static int pch_clk = 50000;     /* specifies I2C clock speed in KHz */
 181static wait_queue_head_t pch_event;
 182static DEFINE_MUTEX(pch_mutex);
 183
 184/* Definition for ML7213 by LAPIS Semiconductor */
 185#define PCI_VENDOR_ID_ROHM              0x10DB
 186#define PCI_DEVICE_ID_ML7213_I2C        0x802D
 187#define PCI_DEVICE_ID_ML7223_I2C        0x8010
 188#define PCI_DEVICE_ID_ML7831_I2C        0x8817
 189
 190static DEFINE_PCI_DEVICE_TABLE(pch_pcidev_id) = {
 191        { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_PCH_I2C),   1, },
 192        { PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7213_I2C), 2, },
 193        { PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7223_I2C), 1, },
 194        { PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7831_I2C), 1, },
 195        {0,}
 196};
 197
 198static irqreturn_t pch_i2c_handler(int irq, void *pData);
 199
 200static inline void pch_setbit(void __iomem *addr, u32 offset, u32 bitmask)
 201{
 202        u32 val;
 203        val = ioread32(addr + offset);
 204        val |= bitmask;
 205        iowrite32(val, addr + offset);
 206}
 207
 208static inline void pch_clrbit(void __iomem *addr, u32 offset, u32 bitmask)
 209{
 210        u32 val;
 211        val = ioread32(addr + offset);
 212        val &= (~bitmask);
 213        iowrite32(val, addr + offset);
 214}
 215
 216/**
 217 * pch_i2c_init() - hardware initialization of I2C module
 218 * @adap:       Pointer to struct i2c_algo_pch_data.
 219 */
 220static void pch_i2c_init(struct i2c_algo_pch_data *adap)
 221{
 222        void __iomem *p = adap->pch_base_address;
 223        u32 pch_i2cbc;
 224        u32 pch_i2ctmr;
 225        u32 reg_value;
 226
 227        /* reset I2C controller */
 228        iowrite32(0x01, p + PCH_I2CSRST);
 229        msleep(20);
 230        iowrite32(0x0, p + PCH_I2CSRST);
 231
 232        /* Initialize I2C registers */
 233        iowrite32(0x21, p + PCH_I2CNF);
 234
 235        pch_setbit(adap->pch_base_address, PCH_I2CCTL, PCH_I2CCTL_I2CMEN);
 236
 237        if (pch_i2c_speed != 400)
 238                pch_i2c_speed = 100;
 239
 240        reg_value = PCH_I2CCTL_I2CMEN;
 241        if (pch_i2c_speed == FAST_MODE_CLK) {
 242                reg_value |= FAST_MODE_EN;
 243                pch_dbg(adap, "Fast mode enabled\n");
 244        }
 245
 246        if (pch_clk > PCH_MAX_CLK)
 247                pch_clk = 62500;
 248
 249        pch_i2cbc = (pch_clk + (pch_i2c_speed * 4)) / (pch_i2c_speed * 8);
 250        /* Set transfer speed in I2CBC */
 251        iowrite32(pch_i2cbc, p + PCH_I2CBC);
 252
 253        pch_i2ctmr = (pch_clk) / 8;
 254        iowrite32(pch_i2ctmr, p + PCH_I2CTMR);
 255
 256        reg_value |= NORMAL_INTR_ENBL;  /* Enable interrupts in normal mode */
 257        iowrite32(reg_value, p + PCH_I2CCTL);
 258
 259        pch_dbg(adap,
 260                "I2CCTL=%x pch_i2cbc=%x pch_i2ctmr=%x Enable interrupts\n",
 261                ioread32(p + PCH_I2CCTL), pch_i2cbc, pch_i2ctmr);
 262
 263        init_waitqueue_head(&pch_event);
 264}
 265
 266/**
 267 * pch_i2c_wait_for_bus_idle() - check the status of bus.
 268 * @adap:       Pointer to struct i2c_algo_pch_data.
 269 * @timeout:    waiting time counter (ms).
 270 */
 271static s32 pch_i2c_wait_for_bus_idle(struct i2c_algo_pch_data *adap,
 272                                     s32 timeout)
 273{
 274        void __iomem *p = adap->pch_base_address;
 275        int schedule = 0;
 276        unsigned long end = jiffies + msecs_to_jiffies(timeout);
 277
 278        while (ioread32(p + PCH_I2CSR) & I2CMBB_BIT) {
 279                if (time_after(jiffies, end)) {
 280                        pch_dbg(adap, "I2CSR = %x\n", ioread32(p + PCH_I2CSR));
 281                        pch_err(adap, "%s: Timeout Error.return%d\n",
 282                                        __func__, -ETIME);
 283                        pch_i2c_init(adap);
 284
 285                        return -ETIME;
 286                }
 287
 288                if (!schedule)
 289                        /* Retry after some usecs */
 290                        udelay(5);
 291                else
 292                        /* Wait a bit more without consuming CPU */
 293                        usleep_range(20, 1000);
 294
 295                schedule = 1;
 296        }
 297
 298        return 0;
 299}
 300
 301/**
 302 * pch_i2c_start() - Generate I2C start condition in normal mode.
 303 * @adap:       Pointer to struct i2c_algo_pch_data.
 304 *
 305 * Generate I2C start condition in normal mode by setting I2CCTL.I2CMSTA to 1.
 306 */
 307static void pch_i2c_start(struct i2c_algo_pch_data *adap)
 308{
 309        void __iomem *p = adap->pch_base_address;
 310        pch_dbg(adap, "I2CCTL = %x\n", ioread32(p + PCH_I2CCTL));
 311        pch_setbit(adap->pch_base_address, PCH_I2CCTL, PCH_START);
 312}
 313
 314/**
 315 * pch_i2c_getack() - to confirm ACK/NACK
 316 * @adap:       Pointer to struct i2c_algo_pch_data.
 317 */
 318static s32 pch_i2c_getack(struct i2c_algo_pch_data *adap)
 319{
 320        u32 reg_val;
 321        void __iomem *p = adap->pch_base_address;
 322        reg_val = ioread32(p + PCH_I2CSR) & PCH_GETACK;
 323
 324        if (reg_val != 0) {
 325                pch_err(adap, "return%d\n", -EPROTO);
 326                return -EPROTO;
 327        }
 328
 329        return 0;
 330}
 331
 332/**
 333 * pch_i2c_stop() - generate stop condition in normal mode.
 334 * @adap:       Pointer to struct i2c_algo_pch_data.
 335 */
 336static void pch_i2c_stop(struct i2c_algo_pch_data *adap)
 337{
 338        void __iomem *p = adap->pch_base_address;
 339        pch_dbg(adap, "I2CCTL = %x\n", ioread32(p + PCH_I2CCTL));
 340        /* clear the start bit */
 341        pch_clrbit(adap->pch_base_address, PCH_I2CCTL, PCH_START);
 342}
 343
 344static int pch_i2c_wait_for_check_xfer(struct i2c_algo_pch_data *adap)
 345{
 346        long ret;
 347
 348        ret = wait_event_timeout(pch_event,
 349                        (adap->pch_event_flag != 0), msecs_to_jiffies(1000));
 350        if (!ret) {
 351                pch_err(adap, "%s:wait-event timeout\n", __func__);
 352                adap->pch_event_flag = 0;
 353                pch_i2c_stop(adap);
 354                pch_i2c_init(adap);
 355                return -ETIMEDOUT;
 356        }
 357
 358        if (adap->pch_event_flag & I2C_ERROR_MASK) {
 359                pch_err(adap, "Lost Arbitration\n");
 360                adap->pch_event_flag = 0;
 361                pch_clrbit(adap->pch_base_address, PCH_I2CSR, I2CMAL_BIT);
 362                pch_clrbit(adap->pch_base_address, PCH_I2CSR, I2CMIF_BIT);
 363                pch_i2c_init(adap);
 364                return -EAGAIN;
 365        }
 366
 367        adap->pch_event_flag = 0;
 368
 369        if (pch_i2c_getack(adap)) {
 370                pch_dbg(adap, "Receive NACK for slave address"
 371                        "setting\n");
 372                return -EIO;
 373        }
 374
 375        return 0;
 376}
 377
 378/**
 379 * pch_i2c_repstart() - generate repeated start condition in normal mode
 380 * @adap:       Pointer to struct i2c_algo_pch_data.
 381 */
 382static void pch_i2c_repstart(struct i2c_algo_pch_data *adap)
 383{
 384        void __iomem *p = adap->pch_base_address;
 385        pch_dbg(adap, "I2CCTL = %x\n", ioread32(p + PCH_I2CCTL));
 386        pch_setbit(adap->pch_base_address, PCH_I2CCTL, PCH_REPSTART);
 387}
 388
 389/**
 390 * pch_i2c_writebytes() - write data to I2C bus in normal mode
 391 * @i2c_adap:   Pointer to the struct i2c_adapter.
 392 * @last:       specifies whether last message or not.
 393 *              In the case of compound mode it will be 1 for last message,
 394 *              otherwise 0.
 395 * @first:      specifies whether first message or not.
 396 *              1 for first message otherwise 0.
 397 */
 398static s32 pch_i2c_writebytes(struct i2c_adapter *i2c_adap,
 399                              struct i2c_msg *msgs, u32 last, u32 first)
 400{
 401        struct i2c_algo_pch_data *adap = i2c_adap->algo_data;
 402        u8 *buf;
 403        u32 length;
 404        u32 addr;
 405        u32 addr_2_msb;
 406        u32 addr_8_lsb;
 407        s32 wrcount;
 408        s32 rtn;
 409        void __iomem *p = adap->pch_base_address;
 410
 411        length = msgs->len;
 412        buf = msgs->buf;
 413        addr = msgs->addr;
 414
 415        /* enable master tx */
 416        pch_setbit(adap->pch_base_address, PCH_I2CCTL, I2C_TX_MODE);
 417
 418        pch_dbg(adap, "I2CCTL = %x msgs->len = %d\n", ioread32(p + PCH_I2CCTL),
 419                length);
 420
 421        if (first) {
 422                if (pch_i2c_wait_for_bus_idle(adap, BUS_IDLE_TIMEOUT) == -ETIME)
 423                        return -ETIME;
 424        }
 425
 426        if (msgs->flags & I2C_M_TEN) {
 427                addr_2_msb = ((addr & I2C_MSB_2B_MSK) >> 7) & 0x06;
 428                iowrite32(addr_2_msb | TEN_BIT_ADDR_MASK, p + PCH_I2CDR);
 429                if (first)
 430                        pch_i2c_start(adap);
 431
 432                rtn = pch_i2c_wait_for_check_xfer(adap);
 433                if (rtn)
 434                        return rtn;
 435
 436                addr_8_lsb = (addr & I2C_ADDR_MSK);
 437                iowrite32(addr_8_lsb, p + PCH_I2CDR);
 438        } else {
 439                /* set 7 bit slave address and R/W bit as 0 */
 440                iowrite32(addr << 1, p + PCH_I2CDR);
 441                if (first)
 442                        pch_i2c_start(adap);
 443        }
 444
 445        rtn = pch_i2c_wait_for_check_xfer(adap);
 446        if (rtn)
 447                return rtn;
 448
 449        for (wrcount = 0; wrcount < length; ++wrcount) {
 450                /* write buffer value to I2C data register */
 451                iowrite32(buf[wrcount], p + PCH_I2CDR);
 452                pch_dbg(adap, "writing %x to Data register\n", buf[wrcount]);
 453
 454                rtn = pch_i2c_wait_for_check_xfer(adap);
 455                if (rtn)
 456                        return rtn;
 457
 458                pch_clrbit(adap->pch_base_address, PCH_I2CSR, I2CMCF_BIT);
 459                pch_clrbit(adap->pch_base_address, PCH_I2CSR, I2CMIF_BIT);
 460        }
 461
 462        /* check if this is the last message */
 463        if (last)
 464                pch_i2c_stop(adap);
 465        else
 466                pch_i2c_repstart(adap);
 467
 468        pch_dbg(adap, "return=%d\n", wrcount);
 469
 470        return wrcount;
 471}
 472
 473/**
 474 * pch_i2c_sendack() - send ACK
 475 * @adap:       Pointer to struct i2c_algo_pch_data.
 476 */
 477static void pch_i2c_sendack(struct i2c_algo_pch_data *adap)
 478{
 479        void __iomem *p = adap->pch_base_address;
 480        pch_dbg(adap, "I2CCTL = %x\n", ioread32(p + PCH_I2CCTL));
 481        pch_clrbit(adap->pch_base_address, PCH_I2CCTL, PCH_ACK);
 482}
 483
 484/**
 485 * pch_i2c_sendnack() - send NACK
 486 * @adap:       Pointer to struct i2c_algo_pch_data.
 487 */
 488static void pch_i2c_sendnack(struct i2c_algo_pch_data *adap)
 489{
 490        void __iomem *p = adap->pch_base_address;
 491        pch_dbg(adap, "I2CCTL = %x\n", ioread32(p + PCH_I2CCTL));
 492        pch_setbit(adap->pch_base_address, PCH_I2CCTL, PCH_ACK);
 493}
 494
 495/**
 496 * pch_i2c_restart() - Generate I2C restart condition in normal mode.
 497 * @adap:       Pointer to struct i2c_algo_pch_data.
 498 *
 499 * Generate I2C restart condition in normal mode by setting I2CCTL.I2CRSTA.
 500 */
 501static void pch_i2c_restart(struct i2c_algo_pch_data *adap)
 502{
 503        void __iomem *p = adap->pch_base_address;
 504        pch_dbg(adap, "I2CCTL = %x\n", ioread32(p + PCH_I2CCTL));
 505        pch_setbit(adap->pch_base_address, PCH_I2CCTL, PCH_RESTART);
 506}
 507
 508/**
 509 * pch_i2c_readbytes() - read data  from I2C bus in normal mode.
 510 * @i2c_adap:   Pointer to the struct i2c_adapter.
 511 * @msgs:       Pointer to i2c_msg structure.
 512 * @last:       specifies whether last message or not.
 513 * @first:      specifies whether first message or not.
 514 */
 515static s32 pch_i2c_readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs,
 516                             u32 last, u32 first)
 517{
 518        struct i2c_algo_pch_data *adap = i2c_adap->algo_data;
 519
 520        u8 *buf;
 521        u32 count;
 522        u32 length;
 523        u32 addr;
 524        u32 addr_2_msb;
 525        u32 addr_8_lsb;
 526        void __iomem *p = adap->pch_base_address;
 527        s32 rtn;
 528
 529        length = msgs->len;
 530        buf = msgs->buf;
 531        addr = msgs->addr;
 532
 533        /* enable master reception */
 534        pch_clrbit(adap->pch_base_address, PCH_I2CCTL, I2C_TX_MODE);
 535
 536        if (first) {
 537                if (pch_i2c_wait_for_bus_idle(adap, BUS_IDLE_TIMEOUT) == -ETIME)
 538                        return -ETIME;
 539        }
 540
 541        if (msgs->flags & I2C_M_TEN) {
 542                addr_2_msb = ((addr & I2C_MSB_2B_MSK) >> 7);
 543                iowrite32(addr_2_msb | TEN_BIT_ADDR_MASK, p + PCH_I2CDR);
 544                if (first)
 545                        pch_i2c_start(adap);
 546
 547                rtn = pch_i2c_wait_for_check_xfer(adap);
 548                if (rtn)
 549                        return rtn;
 550
 551                addr_8_lsb = (addr & I2C_ADDR_MSK);
 552                iowrite32(addr_8_lsb, p + PCH_I2CDR);
 553
 554                pch_i2c_restart(adap);
 555
 556                rtn = pch_i2c_wait_for_check_xfer(adap);
 557                if (rtn)
 558                        return rtn;
 559
 560                addr_2_msb |= I2C_RD;
 561                iowrite32(addr_2_msb | TEN_BIT_ADDR_MASK, p + PCH_I2CDR);
 562        } else {
 563                /* 7 address bits + R/W bit */
 564                addr = (((addr) << 1) | (I2C_RD));
 565                iowrite32(addr, p + PCH_I2CDR);
 566        }
 567
 568        /* check if it is the first message */
 569        if (first)
 570                pch_i2c_start(adap);
 571
 572        rtn = pch_i2c_wait_for_check_xfer(adap);
 573        if (rtn)
 574                return rtn;
 575
 576        if (length == 0) {
 577                pch_i2c_stop(adap);
 578                ioread32(p + PCH_I2CDR); /* Dummy read needs */
 579
 580                count = length;
 581        } else {
 582                int read_index;
 583                int loop;
 584                pch_i2c_sendack(adap);
 585
 586                /* Dummy read */
 587                for (loop = 1, read_index = 0; loop < length; loop++) {
 588                        buf[read_index] = ioread32(p + PCH_I2CDR);
 589
 590                        if (loop != 1)
 591                                read_index++;
 592
 593                        rtn = pch_i2c_wait_for_check_xfer(adap);
 594                        if (rtn)
 595                                return rtn;
 596                }       /* end for */
 597
 598                pch_i2c_sendnack(adap);
 599
 600                buf[read_index] = ioread32(p + PCH_I2CDR); /* Read final - 1 */
 601
 602                if (length != 1)
 603                        read_index++;
 604
 605                rtn = pch_i2c_wait_for_check_xfer(adap);
 606                if (rtn)
 607                        return rtn;
 608
 609                if (last)
 610                        pch_i2c_stop(adap);
 611                else
 612                        pch_i2c_repstart(adap);
 613
 614                buf[read_index++] = ioread32(p + PCH_I2CDR); /* Read Final */
 615                count = read_index;
 616        }
 617
 618        return count;
 619}
 620
 621/**
 622 * pch_i2c_cb() - Interrupt handler Call back function
 623 * @adap:       Pointer to struct i2c_algo_pch_data.
 624 */
 625static void pch_i2c_cb(struct i2c_algo_pch_data *adap)
 626{
 627        u32 sts;
 628        void __iomem *p = adap->pch_base_address;
 629
 630        sts = ioread32(p + PCH_I2CSR);
 631        sts &= (I2CMAL_BIT | I2CMCF_BIT | I2CMIF_BIT);
 632        if (sts & I2CMAL_BIT)
 633                adap->pch_event_flag |= I2CMAL_EVENT;
 634
 635        if (sts & I2CMCF_BIT)
 636                adap->pch_event_flag |= I2CMCF_EVENT;
 637
 638        /* clear the applicable bits */
 639        pch_clrbit(adap->pch_base_address, PCH_I2CSR, sts);
 640
 641        pch_dbg(adap, "PCH_I2CSR = %x\n", ioread32(p + PCH_I2CSR));
 642
 643        wake_up(&pch_event);
 644}
 645
 646/**
 647 * pch_i2c_handler() - interrupt handler for the PCH I2C controller
 648 * @irq:        irq number.
 649 * @pData:      cookie passed back to the handler function.
 650 */
 651static irqreturn_t pch_i2c_handler(int irq, void *pData)
 652{
 653        u32 reg_val;
 654        int flag;
 655        int i;
 656        struct adapter_info *adap_info = pData;
 657        void __iomem *p;
 658        u32 mode;
 659
 660        for (i = 0, flag = 0; i < adap_info->ch_num; i++) {
 661                p = adap_info->pch_data[i].pch_base_address;
 662                mode = ioread32(p + PCH_I2CMOD);
 663                mode &= BUFFER_MODE | EEPROM_SR_MODE;
 664                if (mode != NORMAL_MODE) {
 665                        pch_err(adap_info->pch_data,
 666                                "I2C-%d mode(%d) is not supported\n", mode, i);
 667                        continue;
 668                }
 669                reg_val = ioread32(p + PCH_I2CSR);
 670                if (reg_val & (I2CMAL_BIT | I2CMCF_BIT | I2CMIF_BIT)) {
 671                        pch_i2c_cb(&adap_info->pch_data[i]);
 672                        flag = 1;
 673                }
 674        }
 675
 676        return flag ? IRQ_HANDLED : IRQ_NONE;
 677}
 678
 679/**
 680 * pch_i2c_xfer() - Reading adnd writing data through I2C bus
 681 * @i2c_adap:   Pointer to the struct i2c_adapter.
 682 * @msgs:       Pointer to i2c_msg structure.
 683 * @num:        number of messages.
 684 */
 685static s32 pch_i2c_xfer(struct i2c_adapter *i2c_adap,
 686                        struct i2c_msg *msgs, s32 num)
 687{
 688        struct i2c_msg *pmsg;
 689        u32 i = 0;
 690        u32 status;
 691        s32 ret;
 692
 693        struct i2c_algo_pch_data *adap = i2c_adap->algo_data;
 694
 695        ret = mutex_lock_interruptible(&pch_mutex);
 696        if (ret)
 697                return ret;
 698
 699        if (adap->p_adapter_info->pch_i2c_suspended) {
 700                mutex_unlock(&pch_mutex);
 701                return -EBUSY;
 702        }
 703
 704        pch_dbg(adap, "adap->p_adapter_info->pch_i2c_suspended is %d\n",
 705                adap->p_adapter_info->pch_i2c_suspended);
 706        /* transfer not completed */
 707        adap->pch_i2c_xfer_in_progress = true;
 708
 709        for (i = 0; i < num && ret >= 0; i++) {
 710                pmsg = &msgs[i];
 711                pmsg->flags |= adap->pch_buff_mode_en;
 712                status = pmsg->flags;
 713                pch_dbg(adap,
 714                        "After invoking I2C_MODE_SEL :flag= 0x%x\n", status);
 715
 716                if ((status & (I2C_M_RD)) != false) {
 717                        ret = pch_i2c_readbytes(i2c_adap, pmsg, (i + 1 == num),
 718                                                (i == 0));
 719                } else {
 720                        ret = pch_i2c_writebytes(i2c_adap, pmsg, (i + 1 == num),
 721                                                 (i == 0));
 722                }
 723        }
 724
 725        adap->pch_i2c_xfer_in_progress = false; /* transfer completed */
 726
 727        mutex_unlock(&pch_mutex);
 728
 729        return (ret < 0) ? ret : num;
 730}
 731
 732/**
 733 * pch_i2c_func() - return the functionality of the I2C driver
 734 * @adap:       Pointer to struct i2c_algo_pch_data.
 735 */
 736static u32 pch_i2c_func(struct i2c_adapter *adap)
 737{
 738        return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_10BIT_ADDR;
 739}
 740
 741static struct i2c_algorithm pch_algorithm = {
 742        .master_xfer = pch_i2c_xfer,
 743        .functionality = pch_i2c_func
 744};
 745
 746/**
 747 * pch_i2c_disbl_int() - Disable PCH I2C interrupts
 748 * @adap:       Pointer to struct i2c_algo_pch_data.
 749 */
 750static void pch_i2c_disbl_int(struct i2c_algo_pch_data *adap)
 751{
 752        void __iomem *p = adap->pch_base_address;
 753
 754        pch_clrbit(adap->pch_base_address, PCH_I2CCTL, NORMAL_INTR_ENBL);
 755
 756        iowrite32(EEPROM_RST_INTR_DISBL, p + PCH_I2CESRMSK);
 757
 758        iowrite32(BUFFER_MODE_INTR_DISBL, p + PCH_I2CBUFMSK);
 759}
 760
 761static int pch_i2c_probe(struct pci_dev *pdev,
 762                                   const struct pci_device_id *id)
 763{
 764        void __iomem *base_addr;
 765        int ret;
 766        int i, j;
 767        struct adapter_info *adap_info;
 768        struct i2c_adapter *pch_adap;
 769
 770        pch_pci_dbg(pdev, "Entered.\n");
 771
 772        adap_info = kzalloc((sizeof(struct adapter_info)), GFP_KERNEL);
 773        if (adap_info == NULL) {
 774                pch_pci_err(pdev, "Memory allocation FAILED\n");
 775                return -ENOMEM;
 776        }
 777
 778        ret = pci_enable_device(pdev);
 779        if (ret) {
 780                pch_pci_err(pdev, "pci_enable_device FAILED\n");
 781                goto err_pci_enable;
 782        }
 783
 784        ret = pci_request_regions(pdev, KBUILD_MODNAME);
 785        if (ret) {
 786                pch_pci_err(pdev, "pci_request_regions FAILED\n");
 787                goto err_pci_req;
 788        }
 789
 790        base_addr = pci_iomap(pdev, 1, 0);
 791
 792        if (base_addr == NULL) {
 793                pch_pci_err(pdev, "pci_iomap FAILED\n");
 794                ret = -ENOMEM;
 795                goto err_pci_iomap;
 796        }
 797
 798        /* Set the number of I2C channel instance */
 799        adap_info->ch_num = id->driver_data;
 800
 801        ret = request_irq(pdev->irq, pch_i2c_handler, IRQF_SHARED,
 802                  KBUILD_MODNAME, adap_info);
 803        if (ret) {
 804                pch_pci_err(pdev, "request_irq FAILED\n");
 805                goto err_request_irq;
 806        }
 807
 808        for (i = 0; i < adap_info->ch_num; i++) {
 809                pch_adap = &adap_info->pch_data[i].pch_adapter;
 810                adap_info->pch_i2c_suspended = false;
 811
 812                adap_info->pch_data[i].p_adapter_info = adap_info;
 813
 814                pch_adap->owner = THIS_MODULE;
 815                pch_adap->class = I2C_CLASS_HWMON;
 816                strlcpy(pch_adap->name, KBUILD_MODNAME, sizeof(pch_adap->name));
 817                pch_adap->algo = &pch_algorithm;
 818                pch_adap->algo_data = &adap_info->pch_data[i];
 819
 820                /* base_addr + offset; */
 821                adap_info->pch_data[i].pch_base_address = base_addr + 0x100 * i;
 822
 823                pch_adap->dev.parent = &pdev->dev;
 824
 825                pch_i2c_init(&adap_info->pch_data[i]);
 826
 827                pch_adap->nr = i;
 828                ret = i2c_add_numbered_adapter(pch_adap);
 829                if (ret) {
 830                        pch_pci_err(pdev, "i2c_add_adapter[ch:%d] FAILED\n", i);
 831                        goto err_add_adapter;
 832                }
 833        }
 834
 835        pci_set_drvdata(pdev, adap_info);
 836        pch_pci_dbg(pdev, "returns %d.\n", ret);
 837        return 0;
 838
 839err_add_adapter:
 840        for (j = 0; j < i; j++)
 841                i2c_del_adapter(&adap_info->pch_data[j].pch_adapter);
 842        free_irq(pdev->irq, adap_info);
 843err_request_irq:
 844        pci_iounmap(pdev, base_addr);
 845err_pci_iomap:
 846        pci_release_regions(pdev);
 847err_pci_req:
 848        pci_disable_device(pdev);
 849err_pci_enable:
 850        kfree(adap_info);
 851        return ret;
 852}
 853
 854static void pch_i2c_remove(struct pci_dev *pdev)
 855{
 856        int i;
 857        struct adapter_info *adap_info = pci_get_drvdata(pdev);
 858
 859        free_irq(pdev->irq, adap_info);
 860
 861        for (i = 0; i < adap_info->ch_num; i++) {
 862                pch_i2c_disbl_int(&adap_info->pch_data[i]);
 863                i2c_del_adapter(&adap_info->pch_data[i].pch_adapter);
 864        }
 865
 866        if (adap_info->pch_data[0].pch_base_address)
 867                pci_iounmap(pdev, adap_info->pch_data[0].pch_base_address);
 868
 869        for (i = 0; i < adap_info->ch_num; i++)
 870                adap_info->pch_data[i].pch_base_address = NULL;
 871
 872        pci_release_regions(pdev);
 873
 874        pci_disable_device(pdev);
 875        kfree(adap_info);
 876}
 877
 878#ifdef CONFIG_PM
 879static int pch_i2c_suspend(struct pci_dev *pdev, pm_message_t state)
 880{
 881        int ret;
 882        int i;
 883        struct adapter_info *adap_info = pci_get_drvdata(pdev);
 884        void __iomem *p = adap_info->pch_data[0].pch_base_address;
 885
 886        adap_info->pch_i2c_suspended = true;
 887
 888        for (i = 0; i < adap_info->ch_num; i++) {
 889                while ((adap_info->pch_data[i].pch_i2c_xfer_in_progress)) {
 890                        /* Wait until all channel transfers are completed */
 891                        msleep(20);
 892                }
 893        }
 894
 895        /* Disable the i2c interrupts */
 896        for (i = 0; i < adap_info->ch_num; i++)
 897                pch_i2c_disbl_int(&adap_info->pch_data[i]);
 898
 899        pch_pci_dbg(pdev, "I2CSR = %x I2CBUFSTA = %x I2CESRSTA = %x "
 900                "invoked function pch_i2c_disbl_int successfully\n",
 901                ioread32(p + PCH_I2CSR), ioread32(p + PCH_I2CBUFSTA),
 902                ioread32(p + PCH_I2CESRSTA));
 903
 904        ret = pci_save_state(pdev);
 905
 906        if (ret) {
 907                pch_pci_err(pdev, "pci_save_state\n");
 908                return ret;
 909        }
 910
 911        pci_enable_wake(pdev, PCI_D3hot, 0);
 912        pci_disable_device(pdev);
 913        pci_set_power_state(pdev, pci_choose_state(pdev, state));
 914
 915        return 0;
 916}
 917
 918static int pch_i2c_resume(struct pci_dev *pdev)
 919{
 920        int i;
 921        struct adapter_info *adap_info = pci_get_drvdata(pdev);
 922
 923        pci_set_power_state(pdev, PCI_D0);
 924        pci_restore_state(pdev);
 925
 926        if (pci_enable_device(pdev) < 0) {
 927                pch_pci_err(pdev, "pch_i2c_resume:pci_enable_device FAILED\n");
 928                return -EIO;
 929        }
 930
 931        pci_enable_wake(pdev, PCI_D3hot, 0);
 932
 933        for (i = 0; i < adap_info->ch_num; i++)
 934                pch_i2c_init(&adap_info->pch_data[i]);
 935
 936        adap_info->pch_i2c_suspended = false;
 937
 938        return 0;
 939}
 940#else
 941#define pch_i2c_suspend NULL
 942#define pch_i2c_resume NULL
 943#endif
 944
 945static struct pci_driver pch_pcidriver = {
 946        .name = KBUILD_MODNAME,
 947        .id_table = pch_pcidev_id,
 948        .probe = pch_i2c_probe,
 949        .remove = pch_i2c_remove,
 950        .suspend = pch_i2c_suspend,
 951        .resume = pch_i2c_resume
 952};
 953
 954module_pci_driver(pch_pcidriver);
 955
 956MODULE_DESCRIPTION("Intel EG20T PCH/LAPIS Semico ML7213/ML7223/ML7831 IOH I2C");
 957MODULE_LICENSE("GPL");
 958MODULE_AUTHOR("Tomoya MORINAGA. <tomoya.rohm@gmail.com>");
 959module_param(pch_i2c_speed, int, (S_IRUSR | S_IWUSR));
 960module_param(pch_clk, int, (S_IRUSR | S_IWUSR));
 961