linux/drivers/input/keyboard/adp5588-keys.c
<<
>>
Prefs
   1/*
   2 * File: drivers/input/keyboard/adp5588_keys.c
   3 * Description:  keypad driver for ADP5588 and ADP5587
   4 *               I2C QWERTY Keypad and IO Expander
   5 * Bugs: Enter bugs at http://blackfin.uclinux.org/
   6 *
   7 * Copyright (C) 2008-2010 Analog Devices Inc.
   8 * Licensed under the GPL-2 or later.
   9 */
  10
  11#include <linux/module.h>
  12#include <linux/init.h>
  13#include <linux/interrupt.h>
  14#include <linux/irq.h>
  15#include <linux/workqueue.h>
  16#include <linux/errno.h>
  17#include <linux/pm.h>
  18#include <linux/platform_device.h>
  19#include <linux/input.h>
  20#include <linux/i2c.h>
  21#include <linux/gpio.h>
  22#include <linux/slab.h>
  23
  24#include <linux/i2c/adp5588.h>
  25
  26/* Key Event Register xy */
  27#define KEY_EV_PRESSED          (1 << 7)
  28#define KEY_EV_MASK             (0x7F)
  29
  30#define KP_SEL(x)               (0xFFFF >> (16 - x))    /* 2^x-1 */
  31
  32#define KEYP_MAX_EVENT          10
  33
  34/*
  35 * Early pre 4.0 Silicon required to delay readout by at least 25ms,
  36 * since the Event Counter Register updated 25ms after the interrupt
  37 * asserted.
  38 */
  39#define WA_DELAYED_READOUT_REVID(rev)           ((rev) < 4)
  40
  41struct adp5588_kpad {
  42        struct i2c_client *client;
  43        struct input_dev *input;
  44        struct delayed_work work;
  45        unsigned long delay;
  46        unsigned short keycode[ADP5588_KEYMAPSIZE];
  47        const struct adp5588_gpi_map *gpimap;
  48        unsigned short gpimapsize;
  49#ifdef CONFIG_GPIOLIB
  50        unsigned char gpiomap[ADP5588_MAXGPIO];
  51        bool export_gpio;
  52        struct gpio_chip gc;
  53        struct mutex gpio_lock; /* Protect cached dir, dat_out */
  54        u8 dat_out[3];
  55        u8 dir[3];
  56#endif
  57};
  58
  59static int adp5588_read(struct i2c_client *client, u8 reg)
  60{
  61        int ret = i2c_smbus_read_byte_data(client, reg);
  62
  63        if (ret < 0)
  64                dev_err(&client->dev, "Read Error\n");
  65
  66        return ret;
  67}
  68
  69static int adp5588_write(struct i2c_client *client, u8 reg, u8 val)
  70{
  71        return i2c_smbus_write_byte_data(client, reg, val);
  72}
  73
  74#ifdef CONFIG_GPIOLIB
  75static int adp5588_gpio_get_value(struct gpio_chip *chip, unsigned off)
  76{
  77        struct adp5588_kpad *kpad = container_of(chip, struct adp5588_kpad, gc);
  78        unsigned int bank = ADP5588_BANK(kpad->gpiomap[off]);
  79        unsigned int bit = ADP5588_BIT(kpad->gpiomap[off]);
  80
  81        return !!(adp5588_read(kpad->client, GPIO_DAT_STAT1 + bank) & bit);
  82}
  83
  84static void adp5588_gpio_set_value(struct gpio_chip *chip,
  85                                   unsigned off, int val)
  86{
  87        struct adp5588_kpad *kpad = container_of(chip, struct adp5588_kpad, gc);
  88        unsigned int bank = ADP5588_BANK(kpad->gpiomap[off]);
  89        unsigned int bit = ADP5588_BIT(kpad->gpiomap[off]);
  90
  91        mutex_lock(&kpad->gpio_lock);
  92
  93        if (val)
  94                kpad->dat_out[bank] |= bit;
  95        else
  96                kpad->dat_out[bank] &= ~bit;
  97
  98        adp5588_write(kpad->client, GPIO_DAT_OUT1 + bank,
  99                           kpad->dat_out[bank]);
 100
 101        mutex_unlock(&kpad->gpio_lock);
 102}
 103
 104static int adp5588_gpio_direction_input(struct gpio_chip *chip, unsigned off)
 105{
 106        struct adp5588_kpad *kpad = container_of(chip, struct adp5588_kpad, gc);
 107        unsigned int bank = ADP5588_BANK(kpad->gpiomap[off]);
 108        unsigned int bit = ADP5588_BIT(kpad->gpiomap[off]);
 109        int ret;
 110
 111        mutex_lock(&kpad->gpio_lock);
 112
 113        kpad->dir[bank] &= ~bit;
 114        ret = adp5588_write(kpad->client, GPIO_DIR1 + bank, kpad->dir[bank]);
 115
 116        mutex_unlock(&kpad->gpio_lock);
 117
 118        return ret;
 119}
 120
 121static int adp5588_gpio_direction_output(struct gpio_chip *chip,
 122                                         unsigned off, int val)
 123{
 124        struct adp5588_kpad *kpad = container_of(chip, struct adp5588_kpad, gc);
 125        unsigned int bank = ADP5588_BANK(kpad->gpiomap[off]);
 126        unsigned int bit = ADP5588_BIT(kpad->gpiomap[off]);
 127        int ret;
 128
 129        mutex_lock(&kpad->gpio_lock);
 130
 131        kpad->dir[bank] |= bit;
 132
 133        if (val)
 134                kpad->dat_out[bank] |= bit;
 135        else
 136                kpad->dat_out[bank] &= ~bit;
 137
 138        ret = adp5588_write(kpad->client, GPIO_DAT_OUT1 + bank,
 139                                 kpad->dat_out[bank]);
 140        ret |= adp5588_write(kpad->client, GPIO_DIR1 + bank,
 141                                 kpad->dir[bank]);
 142
 143        mutex_unlock(&kpad->gpio_lock);
 144
 145        return ret;
 146}
 147
 148static int adp5588_build_gpiomap(struct adp5588_kpad *kpad,
 149                                const struct adp5588_kpad_platform_data *pdata)
 150{
 151        bool pin_used[ADP5588_MAXGPIO];
 152        int n_unused = 0;
 153        int i;
 154
 155        memset(pin_used, 0, sizeof(pin_used));
 156
 157        for (i = 0; i < pdata->rows; i++)
 158                pin_used[i] = true;
 159
 160        for (i = 0; i < pdata->cols; i++)
 161                pin_used[i + GPI_PIN_COL_BASE - GPI_PIN_BASE] = true;
 162
 163        for (i = 0; i < kpad->gpimapsize; i++)
 164                pin_used[kpad->gpimap[i].pin - GPI_PIN_BASE] = true;
 165
 166        for (i = 0; i < ADP5588_MAXGPIO; i++)
 167                if (!pin_used[i])
 168                        kpad->gpiomap[n_unused++] = i;
 169
 170        return n_unused;
 171}
 172
 173static int adp5588_gpio_add(struct adp5588_kpad *kpad)
 174{
 175        struct device *dev = &kpad->client->dev;
 176        const struct adp5588_kpad_platform_data *pdata = dev->platform_data;
 177        const struct adp5588_gpio_platform_data *gpio_data = pdata->gpio_data;
 178        int i, error;
 179
 180        if (!gpio_data)
 181                return 0;
 182
 183        kpad->gc.ngpio = adp5588_build_gpiomap(kpad, pdata);
 184        if (kpad->gc.ngpio == 0) {
 185                dev_info(dev, "No unused gpios left to export\n");
 186                return 0;
 187        }
 188
 189        kpad->export_gpio = true;
 190
 191        kpad->gc.direction_input = adp5588_gpio_direction_input;
 192        kpad->gc.direction_output = adp5588_gpio_direction_output;
 193        kpad->gc.get = adp5588_gpio_get_value;
 194        kpad->gc.set = adp5588_gpio_set_value;
 195        kpad->gc.can_sleep = 1;
 196
 197        kpad->gc.base = gpio_data->gpio_start;
 198        kpad->gc.label = kpad->client->name;
 199        kpad->gc.owner = THIS_MODULE;
 200        kpad->gc.names = gpio_data->names;
 201
 202        mutex_init(&kpad->gpio_lock);
 203
 204        error = gpiochip_add(&kpad->gc);
 205        if (error) {
 206                dev_err(dev, "gpiochip_add failed, err: %d\n", error);
 207                return error;
 208        }
 209
 210        for (i = 0; i <= ADP5588_BANK(ADP5588_MAXGPIO); i++) {
 211                kpad->dat_out[i] = adp5588_read(kpad->client,
 212                                                GPIO_DAT_OUT1 + i);
 213                kpad->dir[i] = adp5588_read(kpad->client, GPIO_DIR1 + i);
 214        }
 215
 216        if (gpio_data->setup) {
 217                error = gpio_data->setup(kpad->client,
 218                                         kpad->gc.base, kpad->gc.ngpio,
 219                                         gpio_data->context);
 220                if (error)
 221                        dev_warn(dev, "setup failed, %d\n", error);
 222        }
 223
 224        return 0;
 225}
 226
 227static void adp5588_gpio_remove(struct adp5588_kpad *kpad)
 228{
 229        struct device *dev = &kpad->client->dev;
 230        const struct adp5588_kpad_platform_data *pdata = dev->platform_data;
 231        const struct adp5588_gpio_platform_data *gpio_data = pdata->gpio_data;
 232        int error;
 233
 234        if (!kpad->export_gpio)
 235                return;
 236
 237        if (gpio_data->teardown) {
 238                error = gpio_data->teardown(kpad->client,
 239                                            kpad->gc.base, kpad->gc.ngpio,
 240                                            gpio_data->context);
 241                if (error)
 242                        dev_warn(dev, "teardown failed %d\n", error);
 243        }
 244
 245        error = gpiochip_remove(&kpad->gc);
 246        if (error)
 247                dev_warn(dev, "gpiochip_remove failed %d\n", error);
 248}
 249#else
 250static inline int adp5588_gpio_add(struct adp5588_kpad *kpad)
 251{
 252        return 0;
 253}
 254
 255static inline void adp5588_gpio_remove(struct adp5588_kpad *kpad)
 256{
 257}
 258#endif
 259
 260static void adp5588_report_events(struct adp5588_kpad *kpad, int ev_cnt)
 261{
 262        int i, j;
 263
 264        for (i = 0; i < ev_cnt; i++) {
 265                int key = adp5588_read(kpad->client, Key_EVENTA + i);
 266                int key_val = key & KEY_EV_MASK;
 267
 268                if (key_val >= GPI_PIN_BASE && key_val <= GPI_PIN_END) {
 269                        for (j = 0; j < kpad->gpimapsize; j++) {
 270                                if (key_val == kpad->gpimap[j].pin) {
 271                                        input_report_switch(kpad->input,
 272                                                        kpad->gpimap[j].sw_evt,
 273                                                        key & KEY_EV_PRESSED);
 274                                        break;
 275                                }
 276                        }
 277                } else {
 278                        input_report_key(kpad->input,
 279                                         kpad->keycode[key_val - 1],
 280                                         key & KEY_EV_PRESSED);
 281                }
 282        }
 283}
 284
 285static void adp5588_work(struct work_struct *work)
 286{
 287        struct adp5588_kpad *kpad = container_of(work,
 288                                                struct adp5588_kpad, work.work);
 289        struct i2c_client *client = kpad->client;
 290        int status, ev_cnt;
 291
 292        status = adp5588_read(client, INT_STAT);
 293
 294        if (status & ADP5588_OVR_FLOW_INT)      /* Unlikely and should never happen */
 295                dev_err(&client->dev, "Event Overflow Error\n");
 296
 297        if (status & ADP5588_KE_INT) {
 298                ev_cnt = adp5588_read(client, KEY_LCK_EC_STAT) & ADP5588_KEC;
 299                if (ev_cnt) {
 300                        adp5588_report_events(kpad, ev_cnt);
 301                        input_sync(kpad->input);
 302                }
 303        }
 304        adp5588_write(client, INT_STAT, status); /* Status is W1C */
 305}
 306
 307static irqreturn_t adp5588_irq(int irq, void *handle)
 308{
 309        struct adp5588_kpad *kpad = handle;
 310
 311        /*
 312         * use keventd context to read the event fifo registers
 313         * Schedule readout at least 25ms after notification for
 314         * REVID < 4
 315         */
 316
 317        schedule_delayed_work(&kpad->work, kpad->delay);
 318
 319        return IRQ_HANDLED;
 320}
 321
 322static int adp5588_setup(struct i2c_client *client)
 323{
 324        const struct adp5588_kpad_platform_data *pdata = client->dev.platform_data;
 325        const struct adp5588_gpio_platform_data *gpio_data = pdata->gpio_data;
 326        int i, ret;
 327        unsigned char evt_mode1 = 0, evt_mode2 = 0, evt_mode3 = 0;
 328
 329        ret = adp5588_write(client, KP_GPIO1, KP_SEL(pdata->rows));
 330        ret |= adp5588_write(client, KP_GPIO2, KP_SEL(pdata->cols) & 0xFF);
 331        ret |= adp5588_write(client, KP_GPIO3, KP_SEL(pdata->cols) >> 8);
 332
 333        if (pdata->en_keylock) {
 334                ret |= adp5588_write(client, UNLOCK1, pdata->unlock_key1);
 335                ret |= adp5588_write(client, UNLOCK2, pdata->unlock_key2);
 336                ret |= adp5588_write(client, KEY_LCK_EC_STAT, ADP5588_K_LCK_EN);
 337        }
 338
 339        for (i = 0; i < KEYP_MAX_EVENT; i++)
 340                ret |= adp5588_read(client, Key_EVENTA);
 341
 342        for (i = 0; i < pdata->gpimapsize; i++) {
 343                unsigned short pin = pdata->gpimap[i].pin;
 344
 345                if (pin <= GPI_PIN_ROW_END) {
 346                        evt_mode1 |= (1 << (pin - GPI_PIN_ROW_BASE));
 347                } else {
 348                        evt_mode2 |= ((1 << (pin - GPI_PIN_COL_BASE)) & 0xFF);
 349                        evt_mode3 |= ((1 << (pin - GPI_PIN_COL_BASE)) >> 8);
 350                }
 351        }
 352
 353        if (pdata->gpimapsize) {
 354                ret |= adp5588_write(client, GPI_EM1, evt_mode1);
 355                ret |= adp5588_write(client, GPI_EM2, evt_mode2);
 356                ret |= adp5588_write(client, GPI_EM3, evt_mode3);
 357        }
 358
 359        if (gpio_data) {
 360                for (i = 0; i <= ADP5588_BANK(ADP5588_MAXGPIO); i++) {
 361                        int pull_mask = gpio_data->pullup_dis_mask;
 362
 363                        ret |= adp5588_write(client, GPIO_PULL1 + i,
 364                                (pull_mask >> (8 * i)) & 0xFF);
 365                }
 366        }
 367
 368        ret |= adp5588_write(client, INT_STAT,
 369                                ADP5588_CMP2_INT | ADP5588_CMP1_INT |
 370                                ADP5588_OVR_FLOW_INT | ADP5588_K_LCK_INT |
 371                                ADP5588_GPI_INT | ADP5588_KE_INT); /* Status is W1C */
 372
 373        ret |= adp5588_write(client, CFG, ADP5588_INT_CFG |
 374                                          ADP5588_OVR_FLOW_IEN |
 375                                          ADP5588_KE_IEN);
 376
 377        if (ret < 0) {
 378                dev_err(&client->dev, "Write Error\n");
 379                return ret;
 380        }
 381
 382        return 0;
 383}
 384
 385static void adp5588_report_switch_state(struct adp5588_kpad *kpad)
 386{
 387        int gpi_stat1 = adp5588_read(kpad->client, GPIO_DAT_STAT1);
 388        int gpi_stat2 = adp5588_read(kpad->client, GPIO_DAT_STAT2);
 389        int gpi_stat3 = adp5588_read(kpad->client, GPIO_DAT_STAT3);
 390        int gpi_stat_tmp, pin_loc;
 391        int i;
 392
 393        for (i = 0; i < kpad->gpimapsize; i++) {
 394                unsigned short pin = kpad->gpimap[i].pin;
 395
 396                if (pin <= GPI_PIN_ROW_END) {
 397                        gpi_stat_tmp = gpi_stat1;
 398                        pin_loc = pin - GPI_PIN_ROW_BASE;
 399                } else if ((pin - GPI_PIN_COL_BASE) < 8) {
 400                        gpi_stat_tmp = gpi_stat2;
 401                        pin_loc = pin - GPI_PIN_COL_BASE;
 402                } else {
 403                        gpi_stat_tmp = gpi_stat3;
 404                        pin_loc = pin - GPI_PIN_COL_BASE - 8;
 405                }
 406
 407                if (gpi_stat_tmp < 0) {
 408                        dev_err(&kpad->client->dev,
 409                                "Can't read GPIO_DAT_STAT switch %d default to OFF\n",
 410                                pin);
 411                        gpi_stat_tmp = 0;
 412                }
 413
 414                input_report_switch(kpad->input,
 415                                    kpad->gpimap[i].sw_evt,
 416                                    !(gpi_stat_tmp & (1 << pin_loc)));
 417        }
 418
 419        input_sync(kpad->input);
 420}
 421
 422
 423static int adp5588_probe(struct i2c_client *client,
 424                         const struct i2c_device_id *id)
 425{
 426        struct adp5588_kpad *kpad;
 427        const struct adp5588_kpad_platform_data *pdata = client->dev.platform_data;
 428        struct input_dev *input;
 429        unsigned int revid;
 430        int ret, i;
 431        int error;
 432
 433        if (!i2c_check_functionality(client->adapter,
 434                                        I2C_FUNC_SMBUS_BYTE_DATA)) {
 435                dev_err(&client->dev, "SMBUS Byte Data not Supported\n");
 436                return -EIO;
 437        }
 438
 439        if (!pdata) {
 440                dev_err(&client->dev, "no platform data?\n");
 441                return -EINVAL;
 442        }
 443
 444        if (!pdata->rows || !pdata->cols || !pdata->keymap) {
 445                dev_err(&client->dev, "no rows, cols or keymap from pdata\n");
 446                return -EINVAL;
 447        }
 448
 449        if (pdata->keymapsize != ADP5588_KEYMAPSIZE) {
 450                dev_err(&client->dev, "invalid keymapsize\n");
 451                return -EINVAL;
 452        }
 453
 454        if (!pdata->gpimap && pdata->gpimapsize) {
 455                dev_err(&client->dev, "invalid gpimap from pdata\n");
 456                return -EINVAL;
 457        }
 458
 459        if (pdata->gpimapsize > ADP5588_GPIMAPSIZE_MAX) {
 460                dev_err(&client->dev, "invalid gpimapsize\n");
 461                return -EINVAL;
 462        }
 463
 464        for (i = 0; i < pdata->gpimapsize; i++) {
 465                unsigned short pin = pdata->gpimap[i].pin;
 466
 467                if (pin < GPI_PIN_BASE || pin > GPI_PIN_END) {
 468                        dev_err(&client->dev, "invalid gpi pin data\n");
 469                        return -EINVAL;
 470                }
 471
 472                if (pin <= GPI_PIN_ROW_END) {
 473                        if (pin - GPI_PIN_ROW_BASE + 1 <= pdata->rows) {
 474                                dev_err(&client->dev, "invalid gpi row data\n");
 475                                return -EINVAL;
 476                        }
 477                } else {
 478                        if (pin - GPI_PIN_COL_BASE + 1 <= pdata->cols) {
 479                                dev_err(&client->dev, "invalid gpi col data\n");
 480                                return -EINVAL;
 481                        }
 482                }
 483        }
 484
 485        if (!client->irq) {
 486                dev_err(&client->dev, "no IRQ?\n");
 487                return -EINVAL;
 488        }
 489
 490        kpad = kzalloc(sizeof(*kpad), GFP_KERNEL);
 491        input = input_allocate_device();
 492        if (!kpad || !input) {
 493                error = -ENOMEM;
 494                goto err_free_mem;
 495        }
 496
 497        kpad->client = client;
 498        kpad->input = input;
 499        INIT_DELAYED_WORK(&kpad->work, adp5588_work);
 500
 501        ret = adp5588_read(client, DEV_ID);
 502        if (ret < 0) {
 503                error = ret;
 504                goto err_free_mem;
 505        }
 506
 507        revid = (u8) ret & ADP5588_DEVICE_ID_MASK;
 508        if (WA_DELAYED_READOUT_REVID(revid))
 509                kpad->delay = msecs_to_jiffies(30);
 510
 511        input->name = client->name;
 512        input->phys = "adp5588-keys/input0";
 513        input->dev.parent = &client->dev;
 514
 515        input_set_drvdata(input, kpad);
 516
 517        input->id.bustype = BUS_I2C;
 518        input->id.vendor = 0x0001;
 519        input->id.product = 0x0001;
 520        input->id.version = revid;
 521
 522        input->keycodesize = sizeof(kpad->keycode[0]);
 523        input->keycodemax = pdata->keymapsize;
 524        input->keycode = kpad->keycode;
 525
 526        memcpy(kpad->keycode, pdata->keymap,
 527                pdata->keymapsize * input->keycodesize);
 528
 529        kpad->gpimap = pdata->gpimap;
 530        kpad->gpimapsize = pdata->gpimapsize;
 531
 532        /* setup input device */
 533        __set_bit(EV_KEY, input->evbit);
 534
 535        if (pdata->repeat)
 536                __set_bit(EV_REP, input->evbit);
 537
 538        for (i = 0; i < input->keycodemax; i++)
 539                __set_bit(kpad->keycode[i] & KEY_MAX, input->keybit);
 540        __clear_bit(KEY_RESERVED, input->keybit);
 541
 542        if (kpad->gpimapsize)
 543                __set_bit(EV_SW, input->evbit);
 544        for (i = 0; i < kpad->gpimapsize; i++)
 545                __set_bit(kpad->gpimap[i].sw_evt, input->swbit);
 546
 547        error = input_register_device(input);
 548        if (error) {
 549                dev_err(&client->dev, "unable to register input device\n");
 550                goto err_free_mem;
 551        }
 552
 553        error = request_irq(client->irq, adp5588_irq,
 554                            IRQF_TRIGGER_FALLING,
 555                            client->dev.driver->name, kpad);
 556        if (error) {
 557                dev_err(&client->dev, "irq %d busy?\n", client->irq);
 558                goto err_unreg_dev;
 559        }
 560
 561        error = adp5588_setup(client);
 562        if (error)
 563                goto err_free_irq;
 564
 565        if (kpad->gpimapsize)
 566                adp5588_report_switch_state(kpad);
 567
 568        error = adp5588_gpio_add(kpad);
 569        if (error)
 570                goto err_free_irq;
 571
 572        device_init_wakeup(&client->dev, 1);
 573        i2c_set_clientdata(client, kpad);
 574
 575        dev_info(&client->dev, "Rev.%d keypad, irq %d\n", revid, client->irq);
 576        return 0;
 577
 578 err_free_irq:
 579        free_irq(client->irq, kpad);
 580 err_unreg_dev:
 581        input_unregister_device(input);
 582        input = NULL;
 583 err_free_mem:
 584        input_free_device(input);
 585        kfree(kpad);
 586
 587        return error;
 588}
 589
 590static int adp5588_remove(struct i2c_client *client)
 591{
 592        struct adp5588_kpad *kpad = i2c_get_clientdata(client);
 593
 594        adp5588_write(client, CFG, 0);
 595        free_irq(client->irq, kpad);
 596        cancel_delayed_work_sync(&kpad->work);
 597        input_unregister_device(kpad->input);
 598        adp5588_gpio_remove(kpad);
 599        kfree(kpad);
 600
 601        return 0;
 602}
 603
 604#ifdef CONFIG_PM
 605static int adp5588_suspend(struct device *dev)
 606{
 607        struct adp5588_kpad *kpad = dev_get_drvdata(dev);
 608        struct i2c_client *client = kpad->client;
 609
 610        disable_irq(client->irq);
 611        cancel_delayed_work_sync(&kpad->work);
 612
 613        if (device_may_wakeup(&client->dev))
 614                enable_irq_wake(client->irq);
 615
 616        return 0;
 617}
 618
 619static int adp5588_resume(struct device *dev)
 620{
 621        struct adp5588_kpad *kpad = dev_get_drvdata(dev);
 622        struct i2c_client *client = kpad->client;
 623
 624        if (device_may_wakeup(&client->dev))
 625                disable_irq_wake(client->irq);
 626
 627        enable_irq(client->irq);
 628
 629        return 0;
 630}
 631
 632static const struct dev_pm_ops adp5588_dev_pm_ops = {
 633        .suspend = adp5588_suspend,
 634        .resume  = adp5588_resume,
 635};
 636#endif
 637
 638static const struct i2c_device_id adp5588_id[] = {
 639        { "adp5588-keys", 0 },
 640        { "adp5587-keys", 0 },
 641        { }
 642};
 643MODULE_DEVICE_TABLE(i2c, adp5588_id);
 644
 645static struct i2c_driver adp5588_driver = {
 646        .driver = {
 647                .name = KBUILD_MODNAME,
 648#ifdef CONFIG_PM
 649                .pm   = &adp5588_dev_pm_ops,
 650#endif
 651        },
 652        .probe    = adp5588_probe,
 653        .remove   = adp5588_remove,
 654        .id_table = adp5588_id,
 655};
 656
 657module_i2c_driver(adp5588_driver);
 658
 659MODULE_LICENSE("GPL");
 660MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
 661MODULE_DESCRIPTION("ADP5588/87 Keypad driver");
 662