LXR linux/drivers/media/dvb-frontends/dib3000mb

   1/*
   2 * dib3000mb_priv.h
   3 *
   4 * Copyright (C) 2004 Patrick Boettcher (patrick.boettcher@desy.de)
   5 *
   6 *      This program is free software; you can redistribute it and/or
   7 *      modify it under the terms of the GNU General Public License as
   8 *      published by the Free Software Foundation, version 2.
   9 *
  10 * for more information see dib3000mb.c .
  11 */
  12
  13#ifndef __DIB3000MB_PRIV_H_INCLUDED__
  14#define __DIB3000MB_PRIV_H_INCLUDED__
  15
  16/* info and err, taken from usb.h, if there is anything available like by default. */
  17#define err(format, arg...)  printk(KERN_ERR     "dib3000: " format "\n" , ## arg)
  18#define info(format, arg...) printk(KERN_INFO    "dib3000: " format "\n" , ## arg)
  19#define warn(format, arg...) printk(KERN_WARNING "dib3000: " format "\n" , ## arg)
  20
  21/* handy shortcuts */
  22#define rd(reg) dib3000_read_reg(state,reg)
  23
  24#define wr(reg,val) if (dib3000_write_reg(state,reg,val)) \
  25        { err("while sending 0x%04x to 0x%04x.",val,reg); return -EREMOTEIO; }
  26
  27#define wr_foreach(a,v) { int i; \
  28        if (sizeof(a) != sizeof(v)) \
  29                err("sizeof: %zu %zu is different",sizeof(a),sizeof(v));\
  30        for (i=0; i < sizeof(a)/sizeof(u16); i++) \
  31                wr(a[i],v[i]); \
  32        }
  33
  34#define set_or(reg,val) wr(reg,rd(reg) | val)
  35
  36#define set_and(reg,val) wr(reg,rd(reg) & val)
  37
  38/* debug */
  39
  40#define dprintk(level,args...) \
  41    do { if ((debug & level)) { printk(args); } } while (0)
  42
  43/* mask for enabling a specific pid for the pid_filter */
  44#define DIB3000_ACTIVATE_PID_FILTERING  (0x2000)
  45
  46/* common values for tuning */
  47#define DIB3000_ALPHA_0                                 (     0)
  48#define DIB3000_ALPHA_1                                 (     1)
  49#define DIB3000_ALPHA_2                                 (     2)
  50#define DIB3000_ALPHA_4                                 (     4)
  51
  52#define DIB3000_CONSTELLATION_QPSK              (     0)
  53#define DIB3000_CONSTELLATION_16QAM             (     1)
  54#define DIB3000_CONSTELLATION_64QAM             (     2)
  55
  56#define DIB3000_GUARD_TIME_1_32                 (     0)
  57#define DIB3000_GUARD_TIME_1_16                 (     1)
  58#define DIB3000_GUARD_TIME_1_8                  (     2)
  59#define DIB3000_GUARD_TIME_1_4                  (     3)
  60
  61#define DIB3000_TRANSMISSION_MODE_2K    (     0)
  62#define DIB3000_TRANSMISSION_MODE_8K    (     1)
  63
  64#define DIB3000_SELECT_LP                               (     0)
  65#define DIB3000_SELECT_HP                               (     1)
  66
  67#define DIB3000_FEC_1_2                                 (     1)
  68#define DIB3000_FEC_2_3                                 (     2)
  69#define DIB3000_FEC_3_4                                 (     3)
  70#define DIB3000_FEC_5_6                                 (     5)
  71#define DIB3000_FEC_7_8                                 (     7)
  72
  73#define DIB3000_HRCH_OFF                                (     0)
  74#define DIB3000_HRCH_ON                                 (     1)
  75
  76#define DIB3000_DDS_INVERSION_OFF               (     0)
  77#define DIB3000_DDS_INVERSION_ON                (     1)
  78
  79#define DIB3000_TUNER_WRITE_ENABLE(a)   (0xffff & (a << 8))
  80#define DIB3000_TUNER_WRITE_DISABLE(a)  (0xffff & ((a << 8) | (1 << 7)))
  81
  82#define DIB3000_REG_MANUFACTOR_ID               (  1025)
  83#define DIB3000_I2C_ID_DIBCOM                   (0x01b3)
  84
  85#define DIB3000_REG_DEVICE_ID                   (  1026)
  86#define DIB3000MB_DEVICE_ID                             (0x3000)
  87#define DIB3000MC_DEVICE_ID                             (0x3001)
  88#define DIB3000P_DEVICE_ID                              (0x3002)
  89
  90/* frontend state */
  91struct dib3000_state {
  92        struct i2c_adapter* i2c;
  93
  94/* configuration settings */
  95        struct dib3000_config config;
  96
  97        struct dvb_frontend frontend;
  98        int timing_offset;
  99        int timing_offset_comp_done;
 100
 101        u32 last_tuned_bw;
 102        u32 last_tuned_freq;
 103};
 104
 105/* register addresses and some of their default values */
 106
 107/* restart subsystems */
 108#define DIB3000MB_REG_RESTART                   (     0)
 109
 110#define DIB3000MB_RESTART_OFF                   (     0)
 111#define DIB3000MB_RESTART_AUTO_SEARCH           (1 << 1)
 112#define DIB3000MB_RESTART_CTRL                          (1 << 2)
 113#define DIB3000MB_RESTART_AGC                           (1 << 3)
 114
 115/* FFT size */
 116#define DIB3000MB_REG_FFT                               (     1)
 117
 118/* Guard time */
 119#define DIB3000MB_REG_GUARD_TIME                (     2)
 120
 121/* QAM */
 122#define DIB3000MB_REG_QAM                               (     3)
 123
 124/* Alpha coefficient high priority Viterbi algorithm */
 125#define DIB3000MB_REG_VIT_ALPHA                 (     4)
 126
 127/* spectrum inversion */
 128#define DIB3000MB_REG_DDS_INV                   (     5)
 129
 130/* DDS frequency value (IF position) ad ? values don't match reg_3000mb.txt */
 131#define DIB3000MB_REG_DDS_FREQ_MSB              (     6)
 132#define DIB3000MB_REG_DDS_FREQ_LSB              (     7)
 133#define DIB3000MB_DDS_FREQ_MSB                          (   178)
 134#define DIB3000MB_DDS_FREQ_LSB                          (  8990)
 135
 136/* timing frequency (carrier spacing) */
 137static u16 dib3000mb_reg_timing_freq[] = { 8,9 };
 138static u16 dib3000mb_timing_freq[][2] = {
 139        { 126 , 48873 }, /* 6 MHz */
 140        { 147 , 57019 }, /* 7 MHz */
 141        { 168 , 65164 }, /* 8 MHz */
 142};
 143
 144/* impulse noise parameter */
 145/* 36 ??? */
 146
 147static u16 dib3000mb_reg_impulse_noise[] = { 10,11,12,15,36 };
 148
 149enum dib3000mb_impulse_noise_type {
 150        DIB3000MB_IMPNOISE_OFF,
 151        DIB3000MB_IMPNOISE_MOBILE,
 152        DIB3000MB_IMPNOISE_FIXED,
 153        DIB3000MB_IMPNOISE_DEFAULT
 154};
 155
 156static u16 dib3000mb_impulse_noise_values[][5] = {
 157        { 0x0000, 0x0004, 0x0014, 0x01ff, 0x0399 }, /* off */
 158        { 0x0001, 0x0004, 0x0014, 0x01ff, 0x037b }, /* mobile */
 159        { 0x0001, 0x0004, 0x0020, 0x01bd, 0x0399 }, /* fixed */
 160        { 0x0000, 0x0002, 0x000a, 0x01ff, 0x0399 }, /* default */
 161};
 162
 163/*
 164 * Dual Automatic-Gain-Control
 165 * - gains RF in tuner (AGC1)
 166 * - gains IF after filtering (AGC2)
 167 */
 168
 169/* also from 16 to 18 */
 170static u16 dib3000mb_reg_agc_gain[] = {
 171        19,20,21,22,23,24,25,26,27,28,29,30,31,32
 172};
 173
 174static u16 dib3000mb_default_agc_gain[] =
 175        { 0x0001, 52429,   623, 128, 166, 195, 61,   /* RF ??? */
 176          0x0001, 53766, 38011,   0,  90,  33, 23 }; /* IF ??? */
 177
 178/* phase noise */
 179/* 36 is set when setting the impulse noise */
 180static u16 dib3000mb_reg_phase_noise[] = { 33,34,35,37,38 };
 181
 182static u16 dib3000mb_default_noise_phase[] = { 2, 544, 0, 5, 4 };
 183
 184/* lock duration */
 185static u16 dib3000mb_reg_lock_duration[] = { 39,40 };
 186static u16 dib3000mb_default_lock_duration[] = { 135, 135 };
 187
 188/* AGC loop bandwidth */
 189static u16 dib3000mb_reg_agc_bandwidth[] = { 43,44,45,46,47,48,49,50 };
 190
 191static u16 dib3000mb_agc_bandwidth_low[]  =
 192        { 2088, 10, 2088, 10, 3448, 5, 3448, 5 };
 193static u16 dib3000mb_agc_bandwidth_high[] =
 194        { 2349,  5, 2349,  5, 2586, 2, 2586, 2 };
 195
 196/*
 197 * lock0 definition (coff_lock)
 198 */
 199#define DIB3000MB_REG_LOCK0_MASK                (    51)
 200#define DIB3000MB_LOCK0_DEFAULT                         (     4)
 201
 202/*
 203 * lock1 definition (cpil_lock)
 204 * for auto search
 205 * which values hide behind the lock masks
 206 */
 207#define DIB3000MB_REG_LOCK1_MASK                (    52)
 208#define DIB3000MB_LOCK1_SEARCH_4                        (0x0004)
 209#define DIB3000MB_LOCK1_SEARCH_2048                     (0x0800)
 210#define DIB3000MB_LOCK1_DEFAULT                         (0x0001)
 211
 212/*
 213 * lock2 definition (fec_lock) */
 214#define DIB3000MB_REG_LOCK2_MASK                (    53)
 215#define DIB3000MB_LOCK2_DEFAULT                         (0x0080)
 216
 217/*
 218 * SEQ ? what was that again ... :)
 219 * changes when, inversion, guard time and fft is
 220 * either automatically detected or not
 221 */
 222#define DIB3000MB_REG_SEQ                               (    54)
 223
 224/* bandwidth */
 225static u16 dib3000mb_reg_bandwidth[] = { 55,56,57,58,59,60,61,62,63,64,65,66,67 };
 226static u16 dib3000mb_bandwidth_6mhz[] =
 227        { 0, 33, 53312, 112, 46635, 563, 36565, 0, 1000, 0, 1010, 1, 45264 };
 228
 229static u16 dib3000mb_bandwidth_7mhz[] =
 230        { 0, 28, 64421,  96, 39973, 483,  3255, 0, 1000, 0, 1010, 1, 45264 };
 231
 232static u16 dib3000mb_bandwidth_8mhz[] =
 233        { 0, 25, 23600,  84, 34976, 422, 43808, 0, 1000, 0, 1010, 1, 45264 };
 234
 235#define DIB3000MB_REG_UNK_68                            (    68)
 236#define DIB3000MB_UNK_68                                                (     0)
 237
 238#define DIB3000MB_REG_UNK_69                            (    69)
 239#define DIB3000MB_UNK_69                                                (     0)
 240
 241#define DIB3000MB_REG_UNK_71                            (    71)
 242#define DIB3000MB_UNK_71                                                (     0)
 243
 244#define DIB3000MB_REG_UNK_77                            (    77)
 245#define DIB3000MB_UNK_77                                                (     6)
 246
 247#define DIB3000MB_REG_UNK_78                            (    78)
 248#define DIB3000MB_UNK_78                                                (0x0080)
 249
 250/* isi */
 251#define DIB3000MB_REG_ISI                               (    79)
 252#define DIB3000MB_ISI_ACTIVATE                          (     0)
 253#define DIB3000MB_ISI_INHIBIT                           (     1)
 254
 255/* sync impovement */
 256#define DIB3000MB_REG_SYNC_IMPROVEMENT  (    84)
 257#define DIB3000MB_SYNC_IMPROVE_2K_1_8           (     3)
 258#define DIB3000MB_SYNC_IMPROVE_DEFAULT          (     0)
 259
 260/* phase noise compensation inhibition */
 261#define DIB3000MB_REG_PHASE_NOISE               (    87)
 262#define DIB3000MB_PHASE_NOISE_DEFAULT   (     0)
 263
 264#define DIB3000MB_REG_UNK_92                            (    92)
 265#define DIB3000MB_UNK_92                                                (0x0080)
 266
 267#define DIB3000MB_REG_UNK_96                            (    96)
 268#define DIB3000MB_UNK_96                                                (0x0010)
 269
 270#define DIB3000MB_REG_UNK_97                            (    97)
 271#define DIB3000MB_UNK_97                                                (0x0009)
 272
 273/* mobile mode ??? */
 274#define DIB3000MB_REG_MOBILE_MODE               (   101)
 275#define DIB3000MB_MOBILE_MODE_ON                        (     1)
 276#define DIB3000MB_MOBILE_MODE_OFF                       (     0)
 277
 278#define DIB3000MB_REG_UNK_106                   (   106)
 279#define DIB3000MB_UNK_106                                       (0x0080)
 280
 281#define DIB3000MB_REG_UNK_107                   (   107)
 282#define DIB3000MB_UNK_107                                       (0x0080)
 283
 284#define DIB3000MB_REG_UNK_108                   (   108)
 285#define DIB3000MB_UNK_108                                       (0x0080)
 286
 287/* fft */
 288#define DIB3000MB_REG_UNK_121                   (   121)
 289#define DIB3000MB_UNK_121_2K                            (     7)
 290#define DIB3000MB_UNK_121_DEFAULT                       (     5)
 291
 292#define DIB3000MB_REG_UNK_122                   (   122)
 293#define DIB3000MB_UNK_122                                       (  2867)
 294
 295/* QAM for mobile mode */
 296#define DIB3000MB_REG_MOBILE_MODE_QAM   (   126)
 297#define DIB3000MB_MOBILE_MODE_QAM_64            (     3)
 298#define DIB3000MB_MOBILE_MODE_QAM_QPSK_16       (     1)
 299#define DIB3000MB_MOBILE_MODE_QAM_OFF           (     0)
 300
 301/*
 302 * data diversity when having more than one chip on-board
 303 * see also DIB3000MB_OUTPUT_MODE_DATA_DIVERSITY
 304 */
 305#define DIB3000MB_REG_DATA_IN_DIVERSITY         (   127)
 306#define DIB3000MB_DATA_DIVERSITY_IN_OFF                 (     0)
 307#define DIB3000MB_DATA_DIVERSITY_IN_ON                  (     2)
 308
 309/* vit hrch */
 310#define DIB3000MB_REG_VIT_HRCH                  (   128)
 311
 312/* vit code rate */
 313#define DIB3000MB_REG_VIT_CODE_RATE             (   129)
 314
 315/* vit select hp */
 316#define DIB3000MB_REG_VIT_HP                    (   130)
 317
 318/* time frame for Bit-Error-Rate calculation */
 319#define DIB3000MB_REG_BERLEN                    (   135)
 320#define DIB3000MB_BERLEN_LONG                           (     0)
 321#define DIB3000MB_BERLEN_DEFAULT                        (     1)
 322#define DIB3000MB_BERLEN_MEDIUM                         (     2)
 323#define DIB3000MB_BERLEN_SHORT                          (     3)
 324
 325/* 142 - 152 FIFO parameters
 326 * which is what ?
 327 */
 328
 329#define DIB3000MB_REG_FIFO_142                  (   142)
 330#define DIB3000MB_FIFO_142                                      (     0)
 331
 332/* MPEG2 TS output mode */
 333#define DIB3000MB_REG_MPEG2_OUT_MODE    (   143)
 334#define DIB3000MB_MPEG2_OUT_MODE_204            (     0)
 335#define DIB3000MB_MPEG2_OUT_MODE_188            (     1)
 336
 337#define DIB3000MB_REG_PID_PARSE                 (   144)
 338#define DIB3000MB_PID_PARSE_INHIBIT             (     0)
 339#define DIB3000MB_PID_PARSE_ACTIVATE    (     1)
 340
 341#define DIB3000MB_REG_FIFO                              (   145)
 342#define DIB3000MB_FIFO_INHIBIT                          (     1)
 343#define DIB3000MB_FIFO_ACTIVATE                         (     0)
 344
 345#define DIB3000MB_REG_FIFO_146                  (   146)
 346#define DIB3000MB_FIFO_146                                      (     3)
 347
 348#define DIB3000MB_REG_FIFO_147                  (   147)
 349#define DIB3000MB_FIFO_147                                      (0x0100)
 350
 351/*
 352 * pidfilter
 353 * it is not a hardware pidfilter but a filter which drops all pids
 354 * except the ones set. Necessary because of the limited USB1.1 bandwidth.
 355 * regs 153-168
 356 */
 357
 358#define DIB3000MB_REG_FIRST_PID                 (   153)
 359#define DIB3000MB_NUM_PIDS                              (    16)
 360
 361/*
 362 * output mode
 363 * USB devices have to use 'slave'-mode
 364 * see also DIB3000MB_REG_ELECT_OUT_MODE
 365 */
 366#define DIB3000MB_REG_OUTPUT_MODE               (   169)
 367#define DIB3000MB_OUTPUT_MODE_GATED_CLK         (     0)
 368#define DIB3000MB_OUTPUT_MODE_CONT_CLK          (     1)
 369#define DIB3000MB_OUTPUT_MODE_SERIAL            (     2)
 370#define DIB3000MB_OUTPUT_MODE_DATA_DIVERSITY    (     5)
 371#define DIB3000MB_OUTPUT_MODE_SLAVE                     (     6)
 372
 373/* irq event mask */
 374#define DIB3000MB_REG_IRQ_EVENT_MASK            (   170)
 375#define DIB3000MB_IRQ_EVENT_MASK                                (     0)
 376
 377/* filter coefficients */
 378static u16 dib3000mb_reg_filter_coeffs[] = {
 379        171, 172, 173, 174, 175, 176, 177, 178,
 380        179, 180, 181, 182, 183, 184, 185, 186,
 381        188, 189, 190, 191, 192, 194
 382};
 383
 384static u16 dib3000mb_filter_coeffs[] = {
 385         226,  160,   29,
 386         979,  998,   19,
 387          22, 1019, 1006,
 388        1022,   12,    6,
 389        1017, 1017,    3,
 390           6,       1019,
 391        1021,    2,    3,
 392           1,          0,
 393};
 394
 395/*
 396 * mobile algorithm (when you are moving with your device)
 397 * but not faster than 90 km/h
 398 */
 399#define DIB3000MB_REG_MOBILE_ALGO               (   195)
 400#define DIB3000MB_MOBILE_ALGO_ON                        (     0)
 401#define DIB3000MB_MOBILE_ALGO_OFF                       (     1)
 402
 403/* multiple demodulators algorithm */
 404#define DIB3000MB_REG_MULTI_DEMOD_MSB   (   206)
 405#define DIB3000MB_REG_MULTI_DEMOD_LSB   (   207)
 406
 407/* terminator, no more demods */
 408#define DIB3000MB_MULTI_DEMOD_MSB                       ( 32767)
 409#define DIB3000MB_MULTI_DEMOD_LSB                       (  4095)
 410
 411/* bring the device into a known  */
 412#define DIB3000MB_REG_RESET_DEVICE              (  1024)
 413#define DIB3000MB_RESET_DEVICE                          (0x812c)
 414#define DIB3000MB_RESET_DEVICE_RST                      (     0)
 415
 416/* hardware clock configuration */
 417#define DIB3000MB_REG_CLOCK                             (  1027)
 418#define DIB3000MB_CLOCK_DEFAULT                         (0x9000)
 419#define DIB3000MB_CLOCK_DIVERSITY                       (0x92b0)
 420
 421/* power down config */
 422#define DIB3000MB_REG_POWER_CONTROL             (  1028)
 423#define DIB3000MB_POWER_DOWN                            (     1)
 424#define DIB3000MB_POWER_UP                                      (     0)
 425
 426/* electrical output mode */
 427#define DIB3000MB_REG_ELECT_OUT_MODE    (  1029)
 428#define DIB3000MB_ELECT_OUT_MODE_OFF            (     0)
 429#define DIB3000MB_ELECT_OUT_MODE_ON                     (     1)
 430
 431/* set the tuner i2c address */
 432#define DIB3000MB_REG_TUNER                             (  1089)
 433
 434/* monitoring registers (read only) */
 435
 436/* agc loop locked (size: 1) */
 437#define DIB3000MB_REG_AGC_LOCK                  (   324)
 438
 439/* agc power (size: 16) */
 440#define DIB3000MB_REG_AGC_POWER                 (   325)
 441
 442/* agc1 value (16) */
 443#define DIB3000MB_REG_AGC1_VALUE                (   326)
 444
 445/* agc2 value (16) */
 446#define DIB3000MB_REG_AGC2_VALUE                (   327)
 447
 448/* total RF power (16), can be used for signal strength */
 449#define DIB3000MB_REG_RF_POWER                  (   328)
 450
 451/* dds_frequency with offset (24) */
 452#define DIB3000MB_REG_DDS_VALUE_MSB             (   339)
 453#define DIB3000MB_REG_DDS_VALUE_LSB             (   340)
 454
 455/* timing offset signed (24) */
 456#define DIB3000MB_REG_TIMING_OFFSET_MSB (   341)
 457#define DIB3000MB_REG_TIMING_OFFSET_LSB (   342)
 458
 459/* fft start position (13) */
 460#define DIB3000MB_REG_FFT_WINDOW_POS    (   353)
 461
 462/* carriers locked (1) */
 463#define DIB3000MB_REG_CARRIER_LOCK              (   355)
 464
 465/* noise power (24) */
 466#define DIB3000MB_REG_NOISE_POWER_MSB   (   372)
 467#define DIB3000MB_REG_NOISE_POWER_LSB   (   373)
 468
 469#define DIB3000MB_REG_MOBILE_NOISE_MSB  (   374)
 470#define DIB3000MB_REG_MOBILE_NOISE_LSB  (   375)
 471
 472/*
 473 * signal power (16), this and the above can be
 474 * used to calculate the signal/noise - ratio
 475 */
 476#define DIB3000MB_REG_SIGNAL_POWER              (   380)
 477
 478/* mer (24) */
 479#define DIB3000MB_REG_MER_MSB                   (   381)
 480#define DIB3000MB_REG_MER_LSB                   (   382)
 481
 482/*
 483 * Transmission Parameter Signalling (TPS)
 484 * the following registers can be used to get TPS-information.
 485 * The values are according to the DVB-T standard.
 486 */
 487
 488/* TPS locked (1) */
 489#define DIB3000MB_REG_TPS_LOCK                  (   394)
 490
 491/* QAM from TPS (2) (values according to DIB3000MB_REG_QAM) */
 492#define DIB3000MB_REG_TPS_QAM                   (   398)
 493
 494/* hierarchy from TPS (1) */
 495#define DIB3000MB_REG_TPS_HRCH                  (   399)
 496
 497/* alpha from TPS (3) (values according to DIB3000MB_REG_VIT_ALPHA) */
 498#define DIB3000MB_REG_TPS_VIT_ALPHA             (   400)
 499
 500/* code rate high priority from TPS (3) (values according to DIB3000MB_FEC_*) */
 501#define DIB3000MB_REG_TPS_CODE_RATE_HP  (   401)
 502
 503/* code rate low priority from TPS (3) if DIB3000MB_REG_TPS_VIT_ALPHA */
 504#define DIB3000MB_REG_TPS_CODE_RATE_LP  (   402)
 505
 506/* guard time from TPS (2) (values according to DIB3000MB_REG_GUARD_TIME */
 507#define DIB3000MB_REG_TPS_GUARD_TIME    (   403)
 508
 509/* fft size from TPS (2) (values according to DIB3000MB_REG_FFT) */
 510#define DIB3000MB_REG_TPS_FFT                   (   404)
 511
 512/* cell id from TPS (16) */
 513#define DIB3000MB_REG_TPS_CELL_ID               (   406)
 514
 515/* TPS (68) */
 516#define DIB3000MB_REG_TPS_1                             (   408)
 517#define DIB3000MB_REG_TPS_2                             (   409)
 518#define DIB3000MB_REG_TPS_3                             (   410)
 519#define DIB3000MB_REG_TPS_4                             (   411)
 520#define DIB3000MB_REG_TPS_5                             (   412)
 521
 522/* bit error rate (before RS correction) (21) */
 523#define DIB3000MB_REG_BER_MSB                   (   414)
 524#define DIB3000MB_REG_BER_LSB                   (   415)
 525
 526/* packet error rate (uncorrected TS packets) (16) */
 527#define DIB3000MB_REG_PACKET_ERROR_RATE (   417)
 528
 529/* uncorrected packet count (16) */
 530#define DIB3000MB_REG_UNC                               (   420)
 531
 532/* viterbi locked (1) */
 533#define DIB3000MB_REG_VIT_LCK                   (   421)
 534
 535/* viterbi inidcator (16) */
 536#define DIB3000MB_REG_VIT_INDICATOR             (   422)
 537
 538/* transport stream sync lock (1) */
 539#define DIB3000MB_REG_TS_SYNC_LOCK              (   423)
 540
 541/* transport stream RS lock (1) */
 542#define DIB3000MB_REG_TS_RS_LOCK                (   424)
 543
 544/* lock mask 0 value (1) */
 545#define DIB3000MB_REG_LOCK0_VALUE               (   425)
 546
 547/* lock mask 1 value (1) */
 548#define DIB3000MB_REG_LOCK1_VALUE               (   426)
 549
 550/* lock mask 2 value (1) */
 551#define DIB3000MB_REG_LOCK2_VALUE               (   427)
 552
 553/* interrupt pending for auto search */
 554#define DIB3000MB_REG_AS_IRQ_PENDING    (   434)
 555
 556#endif
 557