/*
 *   Fujitu mb86a20s ISDB-T/ISDB-Tsb Module driver
 *
 *   Copyright (C) 2010-2013 Mauro Carvalho Chehab <mchehab@redhat.com>
 *   Copyright (C) 2009-2010 Douglas Landgraf <dougsland@redhat.com>
 *
 *   This program is free software; you can redistribute it and/or
 *   modify it under the terms of the GNU General Public License as
 *   published by the Free Software Foundation version 2.
 *
 *   This program is distributed in the hope that it will be useful,
 *   but WITHOUT ANY WARRANTY; without even the implied warranty of
 *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 *   General Public License for more details.
 */

#include <linux/kernel.h>
#include <asm/div64.h>

#include "dvb_frontend.h"
#include "mb86a20s.h"

#define NUM_LAYERS 3

static int debug = 1;
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "Activates frontend debugging (default:0)");

enum mb86a20s_bandwidth {
        MB86A20S_13SEG = 0,
        MB86A20S_13SEG_PARTIAL = 1,
        MB86A20S_1SEG = 2,
        MB86A20S_3SEG = 3,
};

u8 mb86a20s_subchannel[] = {
        0xb0, 0xc0, 0xd0, 0xe0,
        0xf0, 0x00, 0x10, 0x20,
};

struct mb86a20s_state {
        struct i2c_adapter *i2c;
        const struct mb86a20s_config *config;
        u32 last_frequency;

        struct dvb_frontend frontend;

        u32 if_freq;
        enum mb86a20s_bandwidth bw;
        bool inversion;
        u32 subchannel;

        u32 estimated_rate[NUM_LAYERS];
        unsigned long get_strength_time;

        bool need_init;
};

struct regdata {
        u8 reg;
        u8 data;
};

#define BER_SAMPLING_RATE       1       /* Seconds */

/*
 * Initialization sequence: Use whatevere default values that PV SBTVD
 * does on its initialisation, obtained via USB snoop
 */
static struct regdata mb86a20s_init1[] = {
        { 0x70, 0x0f },
        { 0x70, 0xff },
        { 0x08, 0x01 },
        { 0x50, 0xd1 }, { 0x51, 0x20 },
};

static struct regdata mb86a20s_init2[] = {
        { 0x28, 0x22 }, { 0x29, 0x00 }, { 0x2a, 0x1f }, { 0x2b, 0xf0 },
        { 0x3b, 0x21 },
        { 0x3c, 0x38 },
        { 0x01, 0x0d },
        { 0x04, 0x08 }, { 0x05, 0x03 },
        { 0x04, 0x0e }, { 0x05, 0x00 },
        { 0x04, 0x0f }, { 0x05, 0x37 },
        { 0x04, 0x0b }, { 0x05, 0x78 },
        { 0x04, 0x00 }, { 0x05, 0x00 },
        { 0x04, 0x01 }, { 0x05, 0x1e },
        { 0x04, 0x02 }, { 0x05, 0x07 },
        { 0x04, 0x03 }, { 0x05, 0xd0 },
        { 0x04, 0x09 }, { 0x05, 0x00 },
        { 0x04, 0x0a }, { 0x05, 0xff },
        { 0x04, 0x27 }, { 0x05, 0x00 },
        { 0x04, 0x28 }, { 0x05, 0x00 },
        { 0x04, 0x1e }, { 0x05, 0x00 },
        { 0x04, 0x29 }, { 0x05, 0x64 },
        { 0x04, 0x32 }, { 0x05, 0x02 },
        { 0x04, 0x14 }, { 0x05, 0x02 },
        { 0x04, 0x04 }, { 0x05, 0x00 },
        { 0x04, 0x05 }, { 0x05, 0x22 },
        { 0x04, 0x06 }, { 0x05, 0x0e },
        { 0x04, 0x07 }, { 0x05, 0xd8 },
        { 0x04, 0x12 }, { 0x05, 0x00 },
        { 0x04, 0x13 }, { 0x05, 0xff },
        { 0x04, 0x15 }, { 0x05, 0x4e },
        { 0x04, 0x16 }, { 0x05, 0x20 },

        /*
         * On this demod, when the bit count reaches the count below,
         * it collects the bit error count. The bit counters are initialized
         * to 65535 here. This warrants that all of them will be quickly
         * calculated when device gets locked. As TMCC is parsed, the values
         * will be adjusted later in the driver's code.
         */
        { 0x52, 0x01 },                         /* Turn on BER before Viterbi */
        { 0x50, 0xa7 }, { 0x51, 0x00 },
        { 0x50, 0xa8 }, { 0x51, 0xff },
        { 0x50, 0xa9 }, { 0x51, 0xff },
        { 0x50, 0xaa }, { 0x51, 0x00 },
        { 0x50, 0xab }, { 0x51, 0xff },
        { 0x50, 0xac }, { 0x51, 0xff },
        { 0x50, 0xad }, { 0x51, 0x00 },
        { 0x50, 0xae }, { 0x51, 0xff },
        { 0x50, 0xaf }, { 0x51, 0xff },

        /*
         * On this demod, post BER counts blocks. When the count reaches the
         * value below, it collects the block error count. The block counters
         * are initialized to 127 here. This warrants that all of them will be
         * quickly calculated when device gets locked. As TMCC is parsed, the
         * values will be adjusted later in the driver's code.
         */
        { 0x5e, 0x07 },                         /* Turn on BER after Viterbi */
        { 0x50, 0xdc }, { 0x51, 0x00 },
        { 0x50, 0xdd }, { 0x51, 0x7f },
        { 0x50, 0xde }, { 0x51, 0x00 },
        { 0x50, 0xdf }, { 0x51, 0x7f },
        { 0x50, 0xe0 }, { 0x51, 0x00 },
        { 0x50, 0xe1 }, { 0x51, 0x7f },

        /*
         * On this demod, when the block count reaches the count below,
         * it collects the block error count. The block counters are initialized
         * to 127 here. This warrants that all of them will be quickly
         * calculated when device gets locked. As TMCC is parsed, the values
         * will be adjusted later in the driver's code.
         */
        { 0x50, 0xb0 }, { 0x51, 0x07 },         /* Enable PER */
        { 0x50, 0xb2 }, { 0x51, 0x00 },
        { 0x50, 0xb3 }, { 0x51, 0x7f },
        { 0x50, 0xb4 }, { 0x51, 0x00 },
        { 0x50, 0xb5 }, { 0x51, 0x7f },
        { 0x50, 0xb6 }, { 0x51, 0x00 },
        { 0x50, 0xb7 }, { 0x51, 0x7f },

        { 0x50, 0x50 }, { 0x51, 0x02 },         /* MER manual mode */
        { 0x50, 0x51 }, { 0x51, 0x04 },         /* MER symbol 4 */
        { 0x45, 0x04 },                         /* CN symbol 4 */
        { 0x48, 0x04 },                         /* CN manual mode */

        { 0x50, 0xd6 }, { 0x51, 0x1f },
        { 0x50, 0xd2 }, { 0x51, 0x03 },
        { 0x50, 0xd7 }, { 0x51, 0xbf },
        { 0x28, 0x74 }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0xff },
        { 0x28, 0x46 }, { 0x29, 0x00 }, { 0x2a, 0x1a }, { 0x2b, 0x0c },

        { 0x04, 0x40 }, { 0x05, 0x00 },
        { 0x28, 0x00 }, { 0x2b, 0x08 },
        { 0x28, 0x05 }, { 0x2b, 0x00 },
        { 0x1c, 0x01 },
        { 0x28, 0x06 }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x1f },
        { 0x28, 0x07 }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x18 },
        { 0x28, 0x08 }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x12 },
        { 0x28, 0x09 }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x30 },
        { 0x28, 0x0a }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x37 },
        { 0x28, 0x0b }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x02 },
        { 0x28, 0x0c }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x09 },
        { 0x28, 0x0d }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x06 },
        { 0x28, 0x0e }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x7b },
        { 0x28, 0x0f }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x76 },
        { 0x28, 0x10 }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x7d },
        { 0x28, 0x11 }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x08 },
        { 0x28, 0x12 }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x0b },
        { 0x28, 0x13 }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x00 },
        { 0x28, 0x14 }, { 0x29, 0x00 }, { 0x2a, 0x01 }, { 0x2b, 0xf2 },
        { 0x28, 0x15 }, { 0x29, 0x00 }, { 0x2a, 0x01 }, { 0x2b, 0xf3 },
        { 0x28, 0x16 }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x05 },
        { 0x28, 0x17 }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x16 },
        { 0x28, 0x18 }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x0f },
        { 0x28, 0x19 }, { 0x29, 0x00 }, { 0x2a, 0x07 }, { 0x2b, 0xef },
        { 0x28, 0x1a }, { 0x29, 0x00 }, { 0x2a, 0x07 }, { 0x2b, 0xd8 },
        { 0x28, 0x1b }, { 0x29, 0x00 }, { 0x2a, 0x07 }, { 0x2b, 0xf1 },
        { 0x28, 0x1c }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x3d },
        { 0x28, 0x1d }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x94 },
        { 0x28, 0x1e }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0xba },
        { 0x50, 0x1e }, { 0x51, 0x5d },
        { 0x50, 0x22 }, { 0x51, 0x00 },
        { 0x50, 0x23 }, { 0x51, 0xc8 },
        { 0x50, 0x24 }, { 0x51, 0x00 },
        { 0x50, 0x25 }, { 0x51, 0xf0 },
        { 0x50, 0x26 }, { 0x51, 0x00 },
        { 0x50, 0x27 }, { 0x51, 0xc3 },
        { 0x50, 0x39 }, { 0x51, 0x02 },
        { 0xec, 0x0f },
        { 0xeb, 0x1f },
        { 0x28, 0x6a }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x00 },
        { 0xd0, 0x00 },
};

static struct regdata mb86a20s_reset_reception[] = {
        { 0x70, 0xf0 },
        { 0x70, 0xff },
        { 0x08, 0x01 },
        { 0x08, 0x00 },
};

static struct regdata mb86a20s_per_ber_reset[] = {
        { 0x53, 0x00 }, /* pre BER Counter reset */
        { 0x53, 0x07 },

        { 0x5f, 0x00 }, /* post BER Counter reset */
        { 0x5f, 0x07 },

        { 0x50, 0xb1 }, /* PER Counter reset */
        { 0x51, 0x07 },
        { 0x51, 0x00 },
};

/*
 * I2C read/write functions and macros
 */

static int mb86a20s_i2c_writereg(struct mb86a20s_state *state,
                             u8 i2c_addr, u8 reg, u8 data)
{
        u8 buf[] = { reg, data };
        struct i2c_msg msg = {
                .addr = i2c_addr, .flags = 0, .buf = buf, .len = 2
        };
        int rc;

        rc = i2c_transfer(state->i2c, &msg, 1);
        if (rc != 1) {
                dev_err(&state->i2c->dev,
                        "%s: writereg error (rc == %i, reg == 0x%02x, data == 0x%02x)\n",
                        __func__, rc, reg, data);
                return rc;
        }

        return 0;
}

static int mb86a20s_i2c_writeregdata(struct mb86a20s_state *state,
                                     u8 i2c_addr, struct regdata *rd, int size)
{
        int i, rc;

        for (i = 0; i < size; i++) {
                rc = mb86a20s_i2c_writereg(state, i2c_addr, rd[i].reg,
                                           rd[i].data);
                if (rc < 0)
                        return rc;
        }
        return 0;
}

static int mb86a20s_i2c_readreg(struct mb86a20s_state *state,
                                u8 i2c_addr, u8 reg)
{
        u8 val;
        int rc;
        struct i2c_msg msg[] = {
                { .addr = i2c_addr, .flags = 0, .buf = &reg, .len = 1 },
                { .addr = i2c_addr, .flags = I2C_M_RD, .buf = &val, .len = 1 }
        };

        rc = i2c_transfer(state->i2c, msg, 2);

        if (rc != 2) {
                dev_err(&state->i2c->dev, "%s: reg=0x%x (error=%d)\n",
                        __func__, reg, rc);
                return (rc < 0) ? rc : -EIO;
        }

        return val;
}

#define mb86a20s_readreg(state, reg) \
        mb86a20s_i2c_readreg(state, state->config->demod_address, reg)
#define mb86a20s_writereg(state, reg, val) \
        mb86a20s_i2c_writereg(state, state->config->demod_address, reg, val)
#define mb86a20s_writeregdata(state, regdata) \
        mb86a20s_i2c_writeregdata(state, state->config->demod_address, \
        regdata, ARRAY_SIZE(regdata))

/*
 * Ancillary internal routines (likely compiled inlined)
 *
 * The functions below assume that gateway lock has already obtained
 */

static int mb86a20s_read_status(struct dvb_frontend *fe, fe_status_t *status)
{
        struct mb86a20s_state *state = fe->demodulator_priv;
        int val;

        *status = 0;

        val = mb86a20s_readreg(state, 0x0a) & 0xf;
        if (val < 0)
                return val;

        if (val >= 2)
                *status |= FE_HAS_SIGNAL;

        if (val >= 4)
                *status |= FE_HAS_CARRIER;

        if (val >= 5)
                *status |= FE_HAS_VITERBI;

        if (val >= 7)
                *status |= FE_HAS_SYNC;

        if (val >= 8)                           /* Maybe 9? */
                *status |= FE_HAS_LOCK;

        dev_dbg(&state->i2c->dev, "%s: Status = 0x%02x (state = %d)\n",
                 __func__, *status, val);

        return val;
}

static int mb86a20s_read_signal_strength(struct dvb_frontend *fe)
{
        struct mb86a20s_state *state = fe->demodulator_priv;
        struct dtv_frontend_properties *c = &fe->dtv_property_cache;
        int rc;
        unsigned rf_max, rf_min, rf;

        if (state->get_strength_time &&
           (!time_after(jiffies, state->get_strength_time)))
                return c->strength.stat[0].uvalue;

        /* Reset its value if an error happen */
        c->strength.stat[0].uvalue = 0;

        /* Does a binary search to get RF strength */
        rf_max = 0xfff;
        rf_min = 0;
        do {
                rf = (rf_max + rf_min) / 2;
                rc = mb86a20s_writereg(state, 0x04, 0x1f);
                if (rc < 0)
                        return rc;
                rc = mb86a20s_writereg(state, 0x05, rf >> 8);
                if (rc < 0)
                        return rc;
                rc = mb86a20s_writereg(state, 0x04, 0x20);
                if (rc < 0)
                        return rc;
                rc = mb86a20s_writereg(state, 0x05, rf);
                if (rc < 0)
                        return rc;

                rc = mb86a20s_readreg(state, 0x02);
                if (rc < 0)
                        return rc;
                if (rc & 0x08)
                        rf_min = (rf_max + rf_min) / 2;
                else
                        rf_max = (rf_max + rf_min) / 2;
                if (rf_max - rf_min < 4) {
                        rf = (rf_max + rf_min) / 2;

                        /* Rescale it from 2^12 (4096) to 2^16 */
                        rf = rf << (16 - 12);
                        if (rf)
                                rf |= (1 << 12) - 1;

                        dev_dbg(&state->i2c->dev,
                                "%s: signal strength = %d (%d < RF=%d < %d)\n",
                                __func__, rf, rf_min, rf >> 4, rf_max);
                        c->strength.stat[0].uvalue = rf;
                        state->get_strength_time = jiffies +
                                                   msecs_to_jiffies(1000);
                        return 0;
                }
        } while (1);
}

static int mb86a20s_get_modulation(struct mb86a20s_state *state,
                                   unsigned layer)
{
        int rc;
        static unsigned char reg[] = {
                [0] = 0x86,     /* Layer A */
                [1] = 0x8a,     /* Layer B */
                [2] = 0x8e,     /* Layer C */
        };

        if (layer >= ARRAY_SIZE(reg))
                return -EINVAL;
        rc = mb86a20s_writereg(state, 0x6d, reg[layer]);
        if (rc < 0)
                return rc;
        rc = mb86a20s_readreg(state, 0x6e);
        if (rc < 0)
                return rc;
        switch ((rc >> 4) & 0x07) {
        case 0:
                return DQPSK;
        case 1:
                return QPSK;
        case 2:
                return QAM_16;
        case 3:
                return QAM_64;
        default:
                return QAM_AUTO;
        }
}

static int mb86a20s_get_fec(struct mb86a20s_state *state,
                            unsigned layer)
{
        int rc;

        static unsigned char reg[] = {
                [0] = 0x87,     /* Layer A */
                [1] = 0x8b,     /* Layer B */
                [2] = 0x8f,     /* Layer C */
        };

        if (layer >= ARRAY_SIZE(reg))
                return -EINVAL;
        rc = mb86a20s_writereg(state, 0x6d, reg[layer]);
        if (rc < 0)
                return rc;
        rc = mb86a20s_readreg(state, 0x6e);
        if (rc < 0)
                return rc;
        switch ((rc >> 4) & 0x07) {
        case 0:
                return FEC_1_2;
        case 1:
                return FEC_2_3;
        case 2:
                return FEC_3_4;
        case 3:
                return FEC_5_6;
        case 4:
                return FEC_7_8;
        default:
                return FEC_AUTO;
        }
}

static int mb86a20s_get_interleaving(struct mb86a20s_state *state,
                                     unsigned layer)
{
        int rc;

        static unsigned char reg[] = {
                [0] = 0x88,     /* Layer A */
                [1] = 0x8c,     /* Layer B */
                [2] = 0x90,     /* Layer C */
        };

        if (layer >= ARRAY_SIZE(reg))
                return -EINVAL;
        rc = mb86a20s_writereg(state, 0x6d, reg[layer]);
        if (rc < 0)
                return rc;
        rc = mb86a20s_readreg(state, 0x6e);
        if (rc < 0)
                return rc;

        switch ((rc >> 4) & 0x07) {
        case 1:
                return GUARD_INTERVAL_1_4;
        case 2:
                return GUARD_INTERVAL_1_8;
        case 3:
                return GUARD_INTERVAL_1_16;
        case 4:
                return GUARD_INTERVAL_1_32;

        default:
        case 0:
                return GUARD_INTERVAL_AUTO;
        }
}

static int mb86a20s_get_segment_count(struct mb86a20s_state *state,
                                      unsigned layer)
{
        int rc, count;
        static unsigned char reg[] = {
                [0] = 0x89,     /* Layer A */
                [1] = 0x8d,     /* Layer B */
                [2] = 0x91,     /* Layer C */
        };

        dev_dbg(&state->i2c->dev, "%s called.\n", __func__);

        if (layer >= ARRAY_SIZE(reg))
                return -EINVAL;

        rc = mb86a20s_writereg(state, 0x6d, reg[layer]);
        if (rc < 0)
                return rc;
        rc = mb86a20s_readreg(state, 0x6e);
        if (rc < 0)
                return rc;
        count = (rc >> 4) & 0x0f;

        dev_dbg(&state->i2c->dev, "%s: segments: %d.\n", __func__, count);

        return count;
}

static void mb86a20s_reset_frontend_cache(struct dvb_frontend *fe)
{
        struct mb86a20s_state *state = fe->demodulator_priv;
        struct dtv_frontend_properties *c = &fe->dtv_property_cache;

        dev_dbg(&state->i2c->dev, "%s called.\n", __func__);

        /* Fixed parameters */
        c->delivery_system = SYS_ISDBT;
        c->bandwidth_hz = 6000000;

        /* Initialize values that will be later autodetected */
        c->isdbt_layer_enabled = 0;
        c->transmission_mode = TRANSMISSION_MODE_AUTO;
        c->guard_interval = GUARD_INTERVAL_AUTO;
        c->isdbt_sb_mode = 0;
        c->isdbt_sb_segment_count = 0;
}

/*
 * Estimates the bit rate using the per-segment bit rate given by
 * ABNT/NBR 15601 spec (table 4).
 */
static u32 isdbt_rate[3][5][4] = {
        {       /* DQPSK/QPSK */
                {  280850,  312060,  330420,  340430 }, /* 1/2 */
                {  374470,  416080,  440560,  453910 }, /* 2/3 */
                {  421280,  468090,  495630,  510650 }, /* 3/4 */
                {  468090,  520100,  550700,  567390 }, /* 5/6 */
                {  491500,  546110,  578230,  595760 }, /* 7/8 */
        }, {    /* QAM16 */
                {  561710,  624130,  660840,  680870 }, /* 1/2 */
                {  748950,  832170,  881120,  907820 }, /* 2/3 */
                {  842570,  936190,  991260, 1021300 }, /* 3/4 */
                {  936190, 1040210, 1101400, 1134780 }, /* 5/6 */
                {  983000, 1092220, 1156470, 1191520 }, /* 7/8 */
        }, {    /* QAM64 */
                {  842570,  936190,  991260, 1021300 }, /* 1/2 */
                { 1123430, 1248260, 1321680, 1361740 }, /* 2/3 */
                { 1263860, 1404290, 1486900, 1531950 }, /* 3/4 */
                { 1404290, 1560320, 1652110, 1702170 }, /* 5/6 */
                { 1474500, 1638340, 1734710, 1787280 }, /* 7/8 */
        }
};

static void mb86a20s_layer_bitrate(struct dvb_frontend *fe, u32 layer,
                                   u32 modulation, u32 forward_error_correction,
                                   u32 interleaving,
                                   u32 segment)
{
        struct mb86a20s_state *state = fe->demodulator_priv;
        u32 rate;
        int mod, fec, guard;

        /*
         * If modulation/fec/interleaving is not detected, the default is
         * to consider the lowest bit rate, to avoid taking too long time
         * to get BER.
         */
        switch (modulation) {
        case DQPSK:
        case QPSK:
        default:
                mod = 0;
                break;
        case QAM_16:
                mod = 1;
                break;
        case QAM_64:
                mod = 2;
                break;
        }

        switch (forward_error_correction) {
        default:
        case FEC_1_2:
        case FEC_AUTO:
                fec = 0;
                break;
        case FEC_2_3:
                fec = 1;
                break;
        case FEC_3_4:
                fec = 2;
                break;
        case FEC_5_6:
                fec = 3;
                break;
        case FEC_7_8:
                fec = 4;
                break;
        }

        switch (interleaving) {
        default:
        case GUARD_INTERVAL_1_4:
                guard = 0;
                break;
        case GUARD_INTERVAL_1_8:
                guard = 1;
                break;
        case GUARD_INTERVAL_1_16:
                guard = 2;
                break;
        case GUARD_INTERVAL_1_32:
                guard = 3;
                break;
        }

        /* Samples BER at BER_SAMPLING_RATE seconds */
        rate = isdbt_rate[mod][fec][guard] * segment * BER_SAMPLING_RATE;

        /* Avoids sampling too quickly or to overflow the register */
        if (rate < 256)
                rate = 256;
        else if (rate > (1 << 24) - 1)
                rate = (1 << 24) - 1;

        dev_dbg(&state->i2c->dev,
                "%s: layer %c bitrate: %d kbps; counter = %d (0x%06x)\n",
                __func__, 'A' + layer,
                segment * isdbt_rate[mod][fec][guard]/1000,
                rate, rate);

        state->estimated_rate[layer] = rate;
}

static int mb86a20s_get_frontend(struct dvb_frontend *fe)
{
        struct mb86a20s_state *state = fe->demodulator_priv;
        struct dtv_frontend_properties *c = &fe->dtv_property_cache;
        int layer, rc;

        dev_dbg(&state->i2c->dev, "%s called.\n", __func__);

        /* Reset frontend cache to default values */
        mb86a20s_reset_frontend_cache(fe);

        /* Check for partial reception */
        rc = mb86a20s_writereg(state, 0x6d, 0x85);
        if (rc < 0)
                return rc;
        rc = mb86a20s_readreg(state, 0x6e);
        if (rc < 0)
                return rc;
        c->isdbt_partial_reception = (rc & 0x10) ? 1 : 0;

        /* Get per-layer data */

        for (layer = 0; layer < NUM_LAYERS; layer++) {
                dev_dbg(&state->i2c->dev, "%s: getting data for layer %c.\n",
                        __func__, 'A' + layer);

                rc = mb86a20s_get_segment_count(state, layer);
                if (rc < 0)
                        goto noperlayer_error;
                if (rc >= 0 && rc < 14) {
                        c->layer[layer].segment_count = rc;
                } else {
                        c->layer[layer].segment_count = 0;
                        state->estimated_rate[layer] = 0;
                        continue;
                }
                c->isdbt_layer_enabled |= 1 << layer;
                rc = mb86a20s_get_modulation(state, layer);
                if (rc < 0)
                        goto noperlayer_error;
                dev_dbg(&state->i2c->dev, "%s: modulation %d.\n",
                        __func__, rc);
                c->layer[layer].modulation = rc;
                rc = mb86a20s_get_fec(state, layer);
                if (rc < 0)
                        goto noperlayer_error;
                dev_dbg(&state->i2c->dev, "%s: FEC %d.\n",
                        __func__, rc);
                c->layer[layer].fec = rc;
                rc = mb86a20s_get_interleaving(state, layer);
                if (rc < 0)
                        goto noperlayer_error;
                dev_dbg(&state->i2c->dev, "%s: interleaving %d.\n",
                        __func__, rc);
                c->layer[layer].interleaving = rc;
                mb86a20s_layer_bitrate(fe, layer, c->layer[layer].modulation,
                                       c->layer[layer].fec,
                                       c->layer[layer].interleaving,
                                       c->layer[layer].segment_count);
        }

        rc = mb86a20s_writereg(state, 0x6d, 0x84);
        if (rc < 0)
                return rc;
        if ((rc & 0x60) == 0x20) {
                c->isdbt_sb_mode = 1;
                /* At least, one segment should exist */
                if (!c->isdbt_sb_segment_count)
                        c->isdbt_sb_segment_count = 1;
        }

        /* Get transmission mode and guard interval */
        rc = mb86a20s_readreg(state, 0x07);
        if (rc < 0)
                return rc;
        if ((rc & 0x60) == 0x20) {
                switch (rc & 0x0c >> 2) {
                case 0:
                        c->transmission_mode = TRANSMISSION_MODE_2K;
                        break;
                case 1:
                        c->transmission_mode = TRANSMISSION_MODE_4K;
                        break;
                case 2:
                        c->transmission_mode = TRANSMISSION_MODE_8K;
                        break;
                }
        }
        if (!(rc & 0x10)) {
                switch (rc & 0x3) {
                case 0:
                        c->guard_interval = GUARD_INTERVAL_1_4;
                        break;
                case 1:
                        c->guard_interval = GUARD_INTERVAL_1_8;
                        break;
                case 2:
                        c->guard_interval = GUARD_INTERVAL_1_16;
                        break;
                }
        }
        return 0;

noperlayer_error:

        /* per-layer info is incomplete; discard all per-layer */
        c->isdbt_layer_enabled = 0;

        return rc;
}

static int mb86a20s_reset_counters(struct dvb_frontend *fe)
{
        struct mb86a20s_state *state = fe->demodulator_priv;
        struct dtv_frontend_properties *c = &fe->dtv_property_cache;
        int rc, val;

        dev_dbg(&state->i2c->dev, "%s called.\n", __func__);

        /* Reset the counters, if the channel changed */
        if (state->last_frequency != c->frequency) {
                memset(&c->cnr, 0, sizeof(c->cnr));
                memset(&c->pre_bit_error, 0, sizeof(c->pre_bit_error));
                memset(&c->pre_bit_count, 0, sizeof(c->pre_bit_count));
                memset(&c->post_bit_error, 0, sizeof(c->post_bit_error));
                memset(&c->post_bit_count, 0, sizeof(c->post_bit_count));
                memset(&c->block_error, 0, sizeof(c->block_error));
                memset(&c->block_count, 0, sizeof(c->block_count));

                state->last_frequency = c->frequency;
        }

        /* Clear status for most stats */

        /* BER/PER counter reset */
        rc = mb86a20s_writeregdata(state, mb86a20s_per_ber_reset);
        if (rc < 0)
                goto err;

        /* CNR counter reset */
        rc = mb86a20s_readreg(state, 0x45);
        if (rc < 0)
                goto err;
        val = rc;
        rc = mb86a20s_writereg(state, 0x45, val | 0x10);
        if (rc < 0)
                goto err;
        rc = mb86a20s_writereg(state, 0x45, val & 0x6f);
        if (rc < 0)
                goto err;

        /* MER counter reset */
        rc = mb86a20s_writereg(state, 0x50, 0x50);
        if (rc < 0)
                goto err;
        rc = mb86a20s_readreg(state, 0x51);
        if (rc < 0)
                goto err;
        val = rc;
        rc = mb86a20s_writereg(state, 0x51, val | 0x01);
        if (rc < 0)
                goto err;
        rc = mb86a20s_writereg(state, 0x51, val & 0x06);
        if (rc < 0)
                goto err;

        goto ok;
err:
        dev_err(&state->i2c->dev,
                "%s: Can't reset FE statistics (error %d).\n",
                __func__, rc);
ok:
        return rc;
}

static int mb86a20s_get_pre_ber(struct dvb_frontend *fe,
                                unsigned layer,
                                u32 *error, u32 *count)
{
        struct mb86a20s_state *state = fe->demodulator_priv;
        int rc, val;

        dev_dbg(&state->i2c->dev, "%s called.\n", __func__);

        if (layer >= NUM_LAYERS)
                return -EINVAL;

        /* Check if the BER measures are already available */
        rc = mb86a20s_readreg(state, 0x54);
        if (rc < 0)
                return rc;

        /* Check if data is available for that layer */
        if (!(rc & (1 << layer))) {
                dev_dbg(&state->i2c->dev,
                        "%s: preBER for layer %c is not available yet.\n",
                        __func__, 'A' + layer);
                return -EBUSY;
        }

        /* Read Bit Error Count */
        rc = mb86a20s_readreg(state, 0x55 + layer * 3);
        if (rc < 0)
                return rc;
        *error = rc << 16;
        rc = mb86a20s_readreg(state, 0x56 + layer * 3);
        if (rc < 0)
                return rc;
        *error |= rc << 8;
        rc = mb86a20s_readreg(state, 0x57 + layer * 3);
        if (rc < 0)
                return rc;
        *error |= rc;

        dev_dbg(&state->i2c->dev,
                "%s: bit error before Viterbi for layer %c: %d.\n",
                __func__, 'A' + layer, *error);

        /* Read Bit Count */
        rc = mb86a20s_writereg(state, 0x50, 0xa7 + layer * 3);
        if (rc < 0)
                return rc;
        rc = mb86a20s_readreg(state, 0x51);
        if (rc < 0)
                return rc;
        *count = rc << 16;
        rc = mb86a20s_writereg(state, 0x50, 0xa8 + layer * 3);
        if (rc < 0)
                return rc;
        rc = mb86a20s_readreg(state, 0x51);
        if (rc < 0)
                return rc;
        *count |= rc << 8;
        rc = mb86a20s_writereg(state, 0x50, 0xa9 + layer * 3);
        if (rc < 0)
                return rc;
        rc = mb86a20s_readreg(state, 0x51);
        if (rc < 0)
                return rc;
        *count |= rc;

        dev_dbg(&state->i2c->dev,
                "%s: bit count before Viterbi for layer %c: %d.\n",
                __func__, 'A' + layer, *count);


        /*
         * As we get TMCC data from the frontend, we can better estimate the
         * BER bit counters, in order to do the BER measure during a longer
         * time. Use those data, if available, to update the bit count
         * measure.
         */

        if (state->estimated_rate[layer]
            && state->estimated_rate[layer] != *count) {
                dev_dbg(&state->i2c->dev,
                        "%s: updating layer %c preBER counter to %d.\n",
                        __func__, 'A' + layer, state->estimated_rate[layer]);

                /* Turn off BER before Viterbi */
                rc = mb86a20s_writereg(state, 0x52, 0x00);

                /* Update counter for this layer */
                rc = mb86a20s_writereg(state, 0x50, 0xa7 + layer * 3);
                if (rc < 0)
                        return rc;
                rc = mb86a20s_writereg(state, 0x51,
                                       state->estimated_rate[layer] >> 16);
                if (rc < 0)
                        return rc;
                rc = mb86a20s_writereg(state, 0x50, 0xa8 + layer * 3);
                if (rc < 0)
                        return rc;
                rc = mb86a20s_writereg(state, 0x51,
                                       state->estimated_rate[layer] >> 8);
                if (rc < 0)
                        return rc;
                rc = mb86a20s_writereg(state, 0x50, 0xa9 + layer * 3);
                if (rc < 0)
                        return rc;
                rc = mb86a20s_writereg(state, 0x51,
                                       state->estimated_rate[layer]);
                if (rc < 0)
                        return rc;

                /* Turn on BER before Viterbi */
                rc = mb86a20s_writereg(state, 0x52, 0x01);

                /* Reset all preBER counters */
                rc = mb86a20s_writereg(state, 0x53, 0x00);
                if (rc < 0)
                        return rc;
                rc = mb86a20s_writereg(state, 0x53, 0x07);
        } else {
                /* Reset counter to collect new data */
                rc = mb86a20s_readreg(state, 0x53);
                if (rc < 0)
                        return rc;
                val = rc;
                rc = mb86a20s_writereg(state, 0x53, val & ~(1 << layer));
                if (rc < 0)
                        return rc;
                rc = mb86a20s_writereg(state, 0x53, val | (1 << layer));
        }

        return rc;
}

static int mb86a20s_get_post_ber(struct dvb_frontend *fe,
                                 unsigned layer,
                                  u32 *error, u32 *count)
{
        struct mb86a20s_state *state = fe->demodulator_priv;
        u32 counter, collect_rate;
        int rc, val;

        dev_dbg(&state->i2c->dev, "%s called.\n", __func__);

        if (layer >= NUM_LAYERS)
                return -EINVAL;

        /* Check if the BER measures are already available */
        rc = mb86a20s_readreg(state, 0x60);
        if (rc < 0)
                return rc;

        /* Check if data is available for that layer */
        if (!(rc & (1 << layer))) {
                dev_dbg(&state->i2c->dev,
                        "%s: post BER for layer %c is not available yet.\n",
                        __func__, 'A' + layer);
                return -EBUSY;
        }

        /* Read Bit Error Count */
        rc = mb86a20s_readreg(state, 0x64 + layer * 3);
        if (rc < 0)
                return rc;
        *error = rc << 16;
        rc = mb86a20s_readreg(state, 0x65 + layer * 3);
        if (rc < 0)
                return rc;
        *error |= rc << 8;
        rc = mb86a20s_readreg(state, 0x66 + layer * 3);
        if (rc < 0)
                return rc;
        *error |= rc;

        dev_dbg(&state->i2c->dev,
                "%s: post bit error for layer %c: %d.\n",
                __func__, 'A' + layer, *error);

        /* Read Bit Count */
        rc = mb86a20s_writereg(state, 0x50, 0xdc + layer * 2);
        if (rc < 0)
                return rc;
        rc = mb86a20s_readreg(state, 0x51);
        if (rc < 0)
                return rc;
        counter = rc << 8;
        rc = mb86a20s_writereg(state, 0x50, 0xdd + layer * 2);
        if (rc < 0)
                return rc;
        rc = mb86a20s_readreg(state, 0x51);
        if (rc < 0)
                return rc;
        counter |= rc;
        *count = counter * 204 * 8;

        dev_dbg(&state->i2c->dev,
                "%s: post bit count for layer %c: %d.\n",
                __func__, 'A' + layer, *count);

        /*
         * As we get TMCC data from the frontend, we can better estimate the
         * BER bit counters, in order to do the BER measure during a longer
         * time. Use those data, if available, to update the bit count
         * measure.
         */

        if (!state->estimated_rate[layer])
                goto reset_measurement;

        collect_rate = state->estimated_rate[layer] / 204 / 8;
        if (collect_rate < 32)
                collect_rate = 32;
        if (collect_rate > 65535)
                collect_rate = 65535;
        if (collect_rate != counter) {
                dev_dbg(&state->i2c->dev,
                        "%s: updating postBER counter on layer %c to %d.\n",
                        __func__, 'A' + layer, collect_rate);

                /* Turn off BER after Viterbi */
                rc = mb86a20s_writereg(state, 0x5e, 0x00);

                /* Update counter for this layer */
                rc = mb86a20s_writereg(state, 0x50, 0xdc + layer * 2);
                if (rc < 0)
                        return rc;
                rc = mb86a20s_writereg(state, 0x51, collect_rate >> 8);
                if (rc < 0)
                        return rc;
                rc = mb86a20s_writereg(state, 0x50, 0xdd + layer * 2);
                if (rc < 0)
                        return rc;
                rc = mb86a20s_writereg(state, 0x51, collect_rate & 0xff);
                if (rc < 0)
                        return rc;

                /* Turn on BER after Viterbi */
                rc = mb86a20s_writereg(state, 0x5e, 0x07);

                /* Reset all preBER counters */
                rc = mb86a20s_writereg(state, 0x5f, 0x00);
                if (rc < 0)
                        return rc;
                rc = mb86a20s_writereg(state, 0x5f, 0x07);

                return rc;
        }

reset_measurement:
        /* Reset counter to collect new data */
        rc = mb86a20s_readreg(state, 0x5f);
        if (rc < 0)
                return rc;
        val = rc;
        rc = mb86a20s_writereg(state, 0x5f, val & ~(1 << layer));
        if (rc < 0)
                return rc;
        rc = mb86a20s_writereg(state, 0x5f, val | (1 << layer));

        return rc;
}

static int mb86a20s_get_blk_error(struct dvb_frontend *fe,
                            unsigned layer,
                            u32 *error, u32 *count)
{
        struct mb86a20s_state *state = fe->demodulator_priv;
        int rc, val;
        u32 collect_rate;
        dev_dbg(&state->i2c->dev, "%s called.\n", __func__);

        if (layer >= NUM_LAYERS)
                return -EINVAL;

        /* Check if the PER measures are already available */
        rc = mb86a20s_writereg(state, 0x50, 0xb8);
        if (rc < 0)
                return rc;
        rc = mb86a20s_readreg(state, 0x51);
        if (rc < 0)
                return rc;

        /* Check if data is available for that layer */

        if (!(rc & (1 << layer))) {
                dev_dbg(&state->i2c->dev,
                        "%s: block counts for layer %c aren't available yet.\n",
                        __func__, 'A' + layer);
                return -EBUSY;
        }

        /* Read Packet error Count */
        rc = mb86a20s_writereg(state, 0x50, 0xb9 + layer * 2);
        if (rc < 0)
                return rc;
        rc = mb86a20s_readreg(state, 0x51);
        if (rc < 0)
                return rc;
        *error = rc << 8;
        rc = mb86a20s_writereg(state, 0x50, 0xba + layer * 2);
        if (rc < 0)
                return rc;
        rc = mb86a20s_readreg(state, 0x51);
        if (rc < 0)
                return rc;
        *error |= rc;
        dev_dbg(&state->i2c->dev, "%s: block error for layer %c: %d.\n",
                __func__, 'A' + layer, *error);

        /* Read Bit Count */
        rc = mb86a20s_writereg(state, 0x50, 0xb2 + layer * 2);
        if (rc < 0)
                return rc;
        rc = mb86a20s_readreg(state, 0x51);
        if (rc < 0)
                return rc;
        *count = rc << 8;
        rc = mb86a20s_writereg(state, 0x50, 0xb3 + layer * 2);
        if (rc < 0)
                return rc;
        rc = mb86a20s_readreg(state, 0x51);
        if (rc < 0)
                return rc;
        *count |= rc;

        dev_dbg(&state->i2c->dev,
                "%s: block count for layer %c: %d.\n",
                __func__, 'A' + layer, *count);

        /*
         * As we get TMCC data from the frontend, we can better estimate the
         * BER bit counters, in order to do the BER measure during a longer
         * time. Use those data, if available, to update the bit count
         * measure.
         */

        if (!state->estimated_rate[layer])
                goto reset_measurement;

        collect_rate = state->estimated_rate[layer] / 204 / 8;
        if (collect_rate < 32)
                collect_rate = 32;
        if (collect_rate > 65535)
                collect_rate = 65535;

        if (collect_rate != *count) {
                dev_dbg(&state->i2c->dev,
                        "%s: updating PER counter on layer %c to %d.\n",
                        __func__, 'A' + layer, collect_rate);

                /* Stop PER measurement */
                rc = mb86a20s_writereg(state, 0x50, 0xb0);
                if (rc < 0)
                        return rc;
                rc = mb86a20s_writereg(state, 0x51, 0x00);
                if (rc < 0)
                        return rc;

                /* Update this layer's counter */
                rc = mb86a20s_writereg(state, 0x50, 0xb2 + layer * 2);
                if (rc < 0)
                        return rc;
                rc = mb86a20s_writereg(state, 0x51, collect_rate >> 8);
                if (rc < 0)
                        return rc;
                rc = mb86a20s_writereg(state, 0x50, 0xb3 + layer * 2);
                if (rc < 0)
                        return rc;
                rc = mb86a20s_writereg(state, 0x51, collect_rate & 0xff);
                if (rc < 0)
                        return rc;

                /* start PER measurement */
                rc = mb86a20s_writereg(state, 0x50, 0xb0);
                if (rc < 0)
                        return rc;
                rc = mb86a20s_writereg(state, 0x51, 0x07);
                if (rc < 0)
                        return rc;

                /* Reset all counters to collect new data */
                rc = mb86a20s_writereg(state, 0x50, 0xb1);
                if (rc < 0)
                        return rc;
                rc = mb86a20s_writereg(state, 0x51, 0x07);
                if (rc < 0)
                        return rc;
                rc = mb86a20s_writereg(state, 0x51, 0x00);

                return rc;
        }

reset_measurement:
        /* Reset counter to collect new data */
        rc = mb86a20s_writereg(state, 0x50, 0xb1);
        if (rc < 0)
                return rc;
        rc = mb86a20s_readreg(state, 0x51);
        if (rc < 0)
                return rc;
        val = rc;
        rc = mb86a20s_writereg(state, 0x51, val | (1 << layer));
        if (rc < 0)
                return rc;
        rc = mb86a20s_writereg(state, 0x51, val & ~(1 << layer));

        return rc;
}

struct linear_segments {
        unsigned x, y;
};

/*
 * All tables below return a dB/1000 measurement
 */

static struct linear_segments cnr_to_db_table[] = {
        { 19648,     0},
        { 18187,  1000},
        { 16534,  2000},
        { 14823,  3000},
        { 13161,  4000},
        { 11622,  5000},
        { 10279,  6000},
        {  9089,  7000},
        {  8042,  8000},
        {  7137,  9000},
        {  6342, 10000},
        {  5641, 11000},
        {  5030, 12000},
        {  4474, 13000},
        {  3988, 14000},
        {  3556, 15000},
        {  3180, 16000},
        {  2841, 17000},
        {  2541, 18000},
        {  2276, 19000},
        {  2038, 20000},
        {  1800, 21000},
        {  1625, 22000},
        {  1462, 23000},
        {  1324, 24000},
        {  1175, 25000},
        {  1063, 26000},
        {   980, 27000},
        {   907, 28000},
        {   840, 29000},
        {   788, 30000},
};

static struct linear_segments cnr_64qam_table[] = {
        { 3922688,     0},
        { 3920384,  1000},
        { 3902720,  2000},
        { 3894784,  3000},
        { 3882496,  4000},
        { 3872768,  5000},
        { 3858944,  6000},
        { 3851520,  7000},
        { 3838976,  8000},
        { 3829248,  9000},
        { 3818240, 10000},
        { 3806976, 11000},
        { 3791872, 12000},
        { 3767040, 13000},
        { 3720960, 14000},
        { 3637504, 15000},
        { 3498496, 16000},
        { 3296000, 17000},
        { 3031040, 18000},
        { 2715392, 19000},
        { 2362624, 20000},
        { 1963264, 21000},
        { 1649664, 22000},
        { 1366784, 23000},
        { 1120768, 24000},
        {  890880, 25000},
        {  723456, 26000},
        {  612096, 27000},
        {  518912, 28000},
        {  448256, 29000},
        {  388864, 30000},
};

static struct linear_segments cnr_16qam_table[] = {
        { 5314816,     0},
        { 5219072,  1000},
        { 5118720,  2000},
        { 4998912,  3000},
        { 4875520,  4000},
        { 4736000,  5000},
        { 4604160,  6000},
        { 4458752,  7000},
        { 4300288,  8000},
        { 4092928,  9000},
        { 3836160, 10000},
        { 3521024, 11000},
        { 3155968, 12000},
        { 2756864, 13000},
        { 2347008, 14000},
        { 1955072, 15000},
        { 1593600, 16000},
        { 1297920, 17000},
        { 1043968, 18000},
        {  839680, 19000},
        {  672256, 20000},
        {  523008, 21000},
        {  424704, 22000},
        {  345088, 23000},
        {  280064, 24000},
        {  221440, 25000},
        {  179712, 26000},
        {  151040, 27000},
        {  128512, 28000},
        {  110080, 29000},
        {   95744, 30000},
};

struct linear_segments cnr_qpsk_table[] = {
        { 2834176,     0},
        { 2683648,  1000},
        { 2536960,  2000},
        { 2391808,  3000},
        { 2133248,  4000},
        { 1906176,  5000},
        { 1666560,  6000},
        { 1422080,  7000},
        { 1189632,  8000},
        {  976384,  9000},
        {  790272, 10000},
        {  633344, 11000},
        {  505600, 12000},
        {  402944, 13000},
        {  320768, 14000},
        {  255488, 15000},
        {  204032, 16000},
        {  163072, 17000},
        {  130304, 18000},
        {  105216, 19000},
        {   83456, 20000},
        {   65024, 21000},
        {   52480, 22000},
        {   42752, 23000},
        {   34560, 24000},
        {   27136, 25000},
        {   22016, 26000},
        {   18432, 27000},
        {   15616, 28000},
        {   13312, 29000},
        {   11520, 30000},
};

static u32 interpolate_value(u32 value, struct linear_segments *segments,
                             unsigned len)
{
        u64 tmp64;
        u32 dx, dy;
        int i, ret;

        if (value >= segments[0].x)
                return segments[0].y;
        if (value < segments[len-1].x)
                return segments[len-1].y;

        for (i = 1; i < len - 1; i++) {
                /* If value is identical, no need to interpolate */
                if (value == segments[i].x)
                        return segments[i].y;
                if (value > segments[i].x)
                        break;
        }

        /* Linear interpolation between the two (x,y) points */
        dy = segments[i].y - segments[i - 1].y;
        dx = segments[i - 1].x - segments[i].x;
        tmp64 = value - segments[i].x;
        tmp64 *= dy;
        do_div(tmp64, dx);
        ret = segments[i].y - tmp64;

        return ret;
}

static int mb86a20s_get_main_CNR(struct dvb_frontend *fe)
{
        struct mb86a20s_state *state = fe->demodulator_priv;
        struct dtv_frontend_properties *c = &fe->dtv_property_cache;
        u32 cnr_linear, cnr;
        int rc, val;

        /* Check if CNR is available */
        rc = mb86a20s_readreg(state, 0x45);
        if (rc < 0)
                return rc;

        if (!(rc & 0x40)) {
                dev_dbg(&state->i2c->dev, "%s: CNR is not available yet.\n",
                         __func__);
                return -EBUSY;
        }
        val = rc;

        rc = mb86a20s_readreg(state, 0x46);
        if (rc < 0)
                return rc;
        cnr_linear = rc << 8;

        rc = mb86a20s_readreg(state, 0x46);
        if (rc < 0)
                return rc;
        cnr_linear |= rc;

        cnr = interpolate_value(cnr_linear,
                                cnr_to_db_table, ARRAY_SIZE(cnr_to_db_table));

        c->cnr.stat[0].scale = FE_SCALE_DECIBEL;
        c->cnr.stat[0].svalue = cnr;

        dev_dbg(&state->i2c->dev, "%s: CNR is %d.%03d dB (%d)\n",
                __func__, cnr / 1000, cnr % 1000, cnr_linear);

        /* CNR counter reset */
        rc = mb86a20s_writereg(state, 0x45, val | 0x10);
        if (rc < 0)
                return rc;
        rc = mb86a20s_writereg(state, 0x45, val & 0x6f);

        return rc;
}

static int mb86a20s_get_blk_error_layer_CNR(struct dvb_frontend *fe)
{
        struct mb86a20s_state *state = fe->demodulator_priv;
        struct dtv_frontend_properties *c = &fe->dtv_property_cache;
        u32 mer, cnr;
        int rc, val, layer;
        struct linear_segments *segs;
        unsigned segs_len;

        dev_dbg(&state->i2c->dev, "%s called.\n", __func__);

        /* Check if the measures are already available */
        rc = mb86a20s_writereg(state, 0x50, 0x5b);
        if (rc < 0)
                return rc;
        rc = mb86a20s_readreg(state, 0x51);
        if (rc < 0)
                return rc;

        /* Check if data is available */
        if (!(rc & 0x01)) {
                dev_dbg(&state->i2c->dev,
                        "%s: MER measures aren't available yet.\n", __func__);
                return -EBUSY;
        }

        /* Read all layers */
        for (layer = 0; layer < NUM_LAYERS; layer++) {
                if (!(c->isdbt_layer_enabled & (1 << layer))) {
                        c->cnr.stat[1 + layer].scale = FE_SCALE_NOT_AVAILABLE;
                        continue;
                }

                rc = mb86a20s_writereg(state, 0x50, 0x52 + layer * 3);
                if (rc < 0)
                        return rc;
                rc = mb86a20s_readreg(state, 0x51);
                if (rc < 0)
                        return rc;
                mer = rc << 16;
                rc = mb86a20s_writereg(state, 0x50, 0x53 + layer * 3);
                if (rc < 0)
                        return rc;
                rc = mb86a20s_readreg(state, 0x51);
                if (rc < 0)
                        return rc;
                mer |= rc << 8;
                rc = mb86a20s_writereg(state, 0x50, 0x54 + layer * 3);
                if (rc < 0)
                        return rc;
                rc = mb86a20s_readreg(state, 0x51);
                if (rc < 0)
                        return rc;
                mer |= rc;

                switch (c->layer[layer].modulation) {
                case DQPSK:
                case QPSK:
                        segs = cnr_qpsk_table;
                        segs_len = ARRAY_SIZE(cnr_qpsk_table);
                        break;
                case QAM_16:
                        segs = cnr_16qam_table;
                        segs_len = ARRAY_SIZE(cnr_16qam_table);
                        break;
                default:
                case QAM_64:
                        segs = cnr_64qam_table;
                        segs_len = ARRAY_SIZE(cnr_64qam_table);
                        break;
                }
                cnr = interpolate_value(mer, segs, segs_len);

                c->cnr.stat[1 + layer].scale = FE_SCALE_DECIBEL;
                c->cnr.stat[1 + layer].svalue = cnr;

                dev_dbg(&state->i2c->dev,
                        "%s: CNR for layer %c is %d.%03d dB (MER = %d).\n",
                        __func__, 'A' + layer, cnr / 1000, cnr % 1000, mer);

        }

        /* Start a new MER measurement */
        /* MER counter reset */
        rc = mb86a20s_writereg(state, 0x50, 0x50);
        if (rc < 0)
                return rc;
        rc = mb86a20s_readreg(state, 0x51);
        if (rc < 0)
                return rc;
        val = rc;

        rc = mb86a20s_writereg(state, 0x51, val | 0x01);
        if (rc < 0)
                return rc;
        rc = mb86a20s_writereg(state, 0x51, val & 0x06);
        if (rc < 0)
                return rc;

        return 0;
}

static void mb86a20s_stats_not_ready(struct dvb_frontend *fe)
{
        struct mb86a20s_state *state = fe->demodulator_priv;
        struct dtv_frontend_properties *c = &fe->dtv_property_cache;
        int layer;

        dev_dbg(&state->i2c->dev, "%s called.\n", __func__);

        /* Fill the length of each status counter */

        /* Only global stats */
        c->strength.len = 1;

        /* Per-layer stats - 3 layers + global */
        c->cnr.len = NUM_LAYERS + 1;
        c->pre_bit_error.len = NUM_LAYERS + 1;
        c->pre_bit_count.len = NUM_LAYERS + 1;
        c->post_bit_error.len = NUM_LAYERS + 1;
        c->post_bit_count.len = NUM_LAYERS + 1;
        c->block_error.len = NUM_LAYERS + 1;
        c->block_count.len = NUM_LAYERS + 1;

        /* Signal is always available */
        c->strength.stat[0].scale = FE_SCALE_RELATIVE;
        c->strength.stat[0].uvalue = 0;

        /* Put all of them at FE_SCALE_NOT_AVAILABLE */
        for (layer = 0; layer < NUM_LAYERS + 1; layer++) {
                c->cnr.stat[layer].scale = FE_SCALE_NOT_AVAILABLE;
                c->pre_bit_error.stat[layer].scale = FE_SCALE_NOT_AVAILABLE;
                c->pre_bit_count.stat[layer].scale = FE_SCALE_NOT_AVAILABLE;
                c->post_bit_error.stat[layer].scale = FE_SCALE_NOT_AVAILABLE;
                c->post_bit_count.stat[layer].scale = FE_SCALE_NOT_AVAILABLE;
                c->block_error.stat[layer].scale = FE_SCALE_NOT_AVAILABLE;
                c->block_count.stat[layer].scale = FE_SCALE_NOT_AVAILABLE;
        }
}

static int mb86a20s_get_stats(struct dvb_frontend *fe, int status_nr)
{
        struct mb86a20s_state *state = fe->demodulator_priv;
        struct dtv_frontend_properties *c = &fe->dtv_property_cache;
        int rc = 0, layer;
        u32 bit_error = 0, bit_count = 0;
        u32 t_pre_bit_error = 0, t_pre_bit_count = 0;
        u32 t_post_bit_error = 0, t_post_bit_count = 0;
        u32 block_error = 0, block_count = 0;
        u32 t_block_error = 0, t_block_count = 0;
        int active_layers = 0, pre_ber_layers = 0, post_ber_layers = 0;
        int per_layers = 0;

        dev_dbg(&state->i2c->dev, "%s called.\n", __func__);

        mb86a20s_get_main_CNR(fe);

        /* Get per-layer stats */
        mb86a20s_get_blk_error_layer_CNR(fe);

        /*
         * At state 7, only CNR is available
         * For BER measures, state=9 is required
         * FIXME: we may get MER measures with state=8
         */
        if (status_nr < 9)
                return 0;

        for (layer = 0; layer < NUM_LAYERS; layer++) {
                if (c->isdbt_layer_enabled & (1 << layer)) {
                        /* Layer is active and has rc segments */
                        active_layers++;

                        /* Handle BER before vterbi */
                        rc = mb86a20s_get_pre_ber(fe, layer,
                                                  &bit_error, &bit_count);
                        if (rc >= 0) {
                                c->pre_bit_error.stat[1 + layer].scale = FE_SCALE_COUNTER;
                                c->pre_bit_error.stat[1 + layer].uvalue += bit_error;
                                c->pre_bit_count.stat[1 + layer].scale = FE_SCALE_COUNTER;
                                c->pre_bit_count.stat[1 + layer].uvalue += bit_count;
                        } else if (rc != -EBUSY) {
                                /*
                                        * If an I/O error happened,
                                        * measures are now unavailable
                                        */
                                c->pre_bit_error.stat[1 + layer].scale = FE_SCALE_NOT_AVAILABLE;
                                c->pre_bit_count.stat[1 + layer].scale = FE_SCALE_NOT_AVAILABLE;
                                dev_err(&state->i2c->dev,
                                        "%s: Can't get BER for layer %c (error %d).\n",
                                        __func__, 'A' + layer, rc);
                        }
                        if (c->block_error.stat[1 + layer].scale != FE_SCALE_NOT_AVAILABLE)
                                pre_ber_layers++;

                        /* Handle BER post vterbi */
                        rc = mb86a20s_get_post_ber(fe, layer,
                                                   &bit_error, &bit_count);
                        if (rc >= 0) {
                                c->post_bit_error.stat[1 + layer].scale = FE_SCALE_COUNTER;
                                c->post_bit_error.stat[1 + layer].uvalue += bit_error;
                                c->post_bit_count.stat[1 + layer].scale = FE_SCALE_COUNTER;
                                c->post_bit_count.stat[1 + layer].uvalue += bit_count;
                        } else if (rc != -EBUSY) {
                                /*
                                        * If an I/O error happened,
                                        * measures are now unavailable
                                        */
                                c->post_bit_error.stat[1 + layer].scale = FE_SCALE_NOT_AVAILABLE;
                                c->post_bit_count.stat[1 + layer].scale = FE_SCALE_NOT_AVAILABLE;
                                dev_err(&state->i2c->dev,
                                        "%s: Can't get BER for layer %c (error %d).\n",
                                        __func__, 'A' + layer, rc);
                        }
                        if (c->block_error.stat[1 + layer].scale != FE_SCALE_NOT_AVAILABLE)
                                post_ber_layers++;

                        /* Handle Block errors for PER/UCB reports */
                        rc = mb86a20s_get_blk_error(fe, layer,
                                                &block_error,
                                                &block_count);
                        if (rc >= 0) {
                                c->block_error.stat[1 + layer].scale = FE_SCALE_COUNTER;
                                c->block_error.stat[1 + layer].uvalue += block_error;
                                c->block_count.stat[1 + layer].scale = FE_SCALE_COUNTER;
                                c->block_count.stat[1 + layer].uvalue += block_count;
                        } else if (rc != -EBUSY) {
                                /*
                                        * If an I/O error happened,
                                        * measures are now unavailable
                                        */
                                c->block_error.stat[1 + layer].scale = FE_SCALE_NOT_AVAILABLE;
                                c->block_count.stat[1 + layer].scale = FE_SCALE_NOT_AVAILABLE;
                                dev_err(&state->i2c->dev,
                                        "%s: Can't get PER for layer %c (error %d).\n",
                                        __func__, 'A' + layer, rc);

                        }
                        if (c->block_error.stat[1 + layer].scale != FE_SCALE_NOT_AVAILABLE)
                                per_layers++;

                        /* Update total preBER */
                        t_pre_bit_error += c->pre_bit_error.stat[1 + layer].uvalue;
                        t_pre_bit_count += c->pre_bit_count.stat[1 + layer].uvalue;

                        /* Update total postBER */
                        t_post_bit_error += c->post_bit_error.stat[1 + layer].uvalue;
                        t_post_bit_count += c->post_bit_count.stat[1 + layer].uvalue;

                        /* Update total PER */
                        t_block_error += c->block_error.stat[1 + layer].uvalue;
                        t_block_count += c->block_count.stat[1 + layer].uvalue;
                }
        }

        /*
         * Start showing global count if at least one error count is
         * available.
         */
        if (pre_ber_layers) {
                /*
                 * At least one per-layer BER measure was read. We can now
                 * calculate the total BER
                 *
                 * Total Bit Error/Count is calculated as the sum of the
                 * bit errors on all active layers.
                 */
                c->pre_bit_error.stat[0].scale = FE_SCALE_COUNTER;
                c->pre_bit_error.stat[0].uvalue = t_pre_bit_error;
                c->pre_bit_count.stat[0].scale = FE_SCALE_COUNTER;
                c->pre_bit_count.stat[0].uvalue = t_pre_bit_count;
        } else {
                c->pre_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
                c->pre_bit_count.stat[0].scale = FE_SCALE_COUNTER;
        }

        /*
         * Start showing global count if at least one error count is
         * available.
         */
        if (post_ber_layers) {
                /*
                 * At least one per-layer BER measure was read. We can now
                 * calculate the total BER
                 *
                 * Total Bit Error/Count is calculated as the sum of the
                 * bit errors on all active layers.
                 */
                c->post_bit_error.stat[0].scale = FE_SCALE_COUNTER;
                c->post_bit_error.stat[0].uvalue = t_post_bit_error;
                c->post_bit_count.stat[0].scale = FE_SCALE_COUNTER;
                c->post_bit_count.stat[0].uvalue = t_post_bit_count;
        } else {
                c->post_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
                c->post_bit_count.stat[0].scale = FE_SCALE_COUNTER;
        }

        if (per_layers) {
                /*
                 * At least one per-layer UCB measure was read. We can now
                 * calculate the total UCB
                 *
                 * Total block Error/Count is calculated as the sum of the
                 * block errors on all active layers.
                 */
                c->block_error.stat[0].scale = FE_SCALE_COUNTER;
                c->block_error.stat[0].uvalue = t_block_error;
                c->block_count.stat[0].scale = FE_SCALE_COUNTER;
                c->block_count.stat[0].uvalue = t_block_count;
        } else {
                c->block_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
                c->block_count.stat[0].scale = FE_SCALE_COUNTER;
        }

        return rc;
}

/*
 * The functions below are called via DVB callbacks, so they need to
 * properly use the I2C gate control
 */

static int mb86a20s_initfe(struct dvb_frontend *fe)
{
        struct mb86a20s_state *state = fe->demodulator_priv;
        u64 pll;
        u32 fclk;
        int rc;
        u8  regD5 = 1, reg71, reg09 = 0x3a;

        dev_dbg(&state->i2c->dev, "%s called.\n", __func__);

        if (fe->ops.i2c_gate_ctrl)
                fe->ops.i2c_gate_ctrl(fe, 0);

        /* Initialize the frontend */
        rc = mb86a20s_writeregdata(state, mb86a20s_init1);
        if (rc < 0)
                goto err;

        if (!state->inversion)
                reg09 |= 0x04;
        rc = mb86a20s_writereg(state, 0x09, reg09);
        if (rc < 0)
                goto err;
        if (!state->bw)
                reg71 = 1;
        else
                reg71 = 0;
        rc = mb86a20s_writereg(state, 0x39, reg71);
        if (rc < 0)
                goto err;
        rc = mb86a20s_writereg(state, 0x71, state->bw);
        if (rc < 0)
                goto err;
        if (state->subchannel) {
                rc = mb86a20s_writereg(state, 0x44, state->subchannel);
                if (rc < 0)
                        goto err;
        }

        fclk = state->config->fclk;
        if (!fclk)
                fclk = 32571428;

        /* Adjust IF frequency to match tuner */
        if (fe->ops.tuner_ops.get_if_frequency)
                fe->ops.tuner_ops.get_if_frequency(fe, &state->if_freq);

        if (!state->if_freq)
                state->if_freq = 3300000;

        pll = (((u64)1) << 34) * state->if_freq;
        do_div(pll, 63 * fclk);
        pll = (1 << 25) - pll;
        rc = mb86a20s_writereg(state, 0x28, 0x2a);
        if (rc < 0)
                goto err;
        rc = mb86a20s_writereg(state, 0x29, (pll >> 16) & 0xff);
        if (rc < 0)
                goto err;
        rc = mb86a20s_writereg(state, 0x2a, (pll >> 8) & 0xff);
        if (rc < 0)
                goto err;
        rc = mb86a20s_writereg(state, 0x2b, pll & 0xff);
        if (rc < 0)
                goto err;
        dev_dbg(&state->i2c->dev, "%s: fclk=%d, IF=%d, clock reg=0x%06llx\n",
                __func__, fclk, state->if_freq, (long long)pll);

        /* pll = freq[Hz] * 2^24/10^6 / 16.285714286 */
        pll = state->if_freq * 1677721600L;
        do_div(pll, 1628571429L);
        rc = mb86a20s_writereg(state, 0x28, 0x20);
        if (rc < 0)
                goto err;
        rc = mb86a20s_writereg(state, 0x29, (pll >> 16) & 0xff);
        if (rc < 0)
                goto err;
        rc = mb86a20s_writereg(state, 0x2a, (pll >> 8) & 0xff);
        if (rc < 0)
                goto err;
        rc = mb86a20s_writereg(state, 0x2b, pll & 0xff);
        if (rc < 0)
                goto err;
        dev_dbg(&state->i2c->dev, "%s: IF=%d, IF reg=0x%06llx\n",
                __func__, state->if_freq, (long long)pll);

        if (!state->config->is_serial)
                regD5 &= ~1;

        rc = mb86a20s_writereg(state, 0x50, 0xd5);
        if (rc < 0)
                goto err;
        rc = mb86a20s_writereg(state, 0x51, regD5);
        if (rc < 0)
                goto err;

        rc = mb86a20s_writeregdata(state, mb86a20s_init2);
        if (rc < 0)
                goto err;


err:
        if (fe->ops.i2c_gate_ctrl)
                fe->ops.i2c_gate_ctrl(fe, 1);

        if (rc < 0) {
                state->need_init = true;
                dev_info(&state->i2c->dev,
                         "mb86a20s: Init failed. Will try again later\n");
        } else {
                state->need_init = false;
                dev_dbg(&state->i2c->dev, "Initialization succeeded.\n");
        }
        return rc;
}

static int mb86a20s_set_frontend(struct dvb_frontend *fe)
{
        struct mb86a20s_state *state = fe->demodulator_priv;
        struct dtv_frontend_properties *c = &fe->dtv_property_cache;
        int rc, if_freq;
        dev_dbg(&state->i2c->dev, "%s called.\n", __func__);

        if (!c->isdbt_layer_enabled)
                c->isdbt_layer_enabled = 7;

        if (c->isdbt_layer_enabled == 1)
                state->bw = MB86A20S_1SEG;
        else if (c->isdbt_partial_reception)
                state->bw = MB86A20S_13SEG_PARTIAL;
        else
                state->bw = MB86A20S_13SEG;

        if (c->inversion == INVERSION_ON)
                state->inversion = true;
        else
                state->inversion = false;

        if (!c->isdbt_sb_mode) {
                state->subchannel = 0;
        } else {
                if (c->isdbt_sb_subchannel >= ARRAY_SIZE(mb86a20s_subchannel))
                        c->isdbt_sb_subchannel = 0;

                state->subchannel = mb86a20s_subchannel[c->isdbt_sb_subchannel];
        }

        /*
         * Gate should already be opened, but it doesn't hurt to
         * double-check
         */
        if (fe->ops.i2c_gate_ctrl)
                fe->ops.i2c_gate_ctrl(fe, 1);
        fe->ops.tuner_ops.set_params(fe);

        if (fe->ops.tuner_ops.get_if_frequency)
                fe->ops.tuner_ops.get_if_frequency(fe, &if_freq);

        /*
         * Make it more reliable: if, for some reason, the initial
         * device initialization doesn't happen, initialize it when
         * a SBTVD parameters are adjusted.
         *
         * Unfortunately, due to a hard to track bug at tda829x/tda18271,
         * the agc callback logic is not called during DVB attach time,
         * causing mb86a20s to not be initialized with Kworld SBTVD.
         * So, this hack is needed, in order to make Kworld SBTVD to work.
         *
         * It is also needed to change the IF after the initial init.
         *
         * HACK: Always init the frontend when set_frontend is called:
         * it was noticed that, on some devices, it fails to lock on a
         * different channel. So, it is better to reset everything, even
         * wasting some time, than to loose channel lock.
         */
        mb86a20s_initfe(fe);

        if (fe->ops.i2c_gate_ctrl)
                fe->ops.i2c_gate_ctrl(fe, 0);

        rc = mb86a20s_writeregdata(state, mb86a20s_reset_reception);
        mb86a20s_reset_counters(fe);
        mb86a20s_stats_not_ready(fe);

        if (fe->ops.i2c_gate_ctrl)
                fe->ops.i2c_gate_ctrl(fe, 1);

        return rc;
}

static int mb86a20s_read_status_and_stats(struct dvb_frontend *fe,
                                          fe_status_t *status)
{
        struct mb86a20s_state *state = fe->demodulator_priv;
        int rc, status_nr;

        dev_dbg(&state->i2c->dev, "%s called.\n", __func__);

        if (fe->ops.i2c_gate_ctrl)
                fe->ops.i2c_gate_ctrl(fe, 0);

        /* Get lock */
        status_nr = mb86a20s_read_status(fe, status);
        if (status_nr < 7) {
                mb86a20s_stats_not_ready(fe);
                mb86a20s_reset_frontend_cache(fe);
        }
        if (status_nr < 0) {
                dev_err(&state->i2c->dev,
                        "%s: Can't read frontend lock status\n", __func__);
                goto error;
        }

        /* Get signal strength */
        rc = mb86a20s_read_signal_strength(fe);
        if (rc < 0) {
                dev_err(&state->i2c->dev,
                        "%s: Can't reset VBER registers.\n", __func__);
                mb86a20s_stats_not_ready(fe);
                mb86a20s_reset_frontend_cache(fe);

                rc = 0;         /* Status is OK */
                goto error;
        }

        if (status_nr >= 7) {
                /* Get TMCC info*/
                rc = mb86a20s_get_frontend(fe);
                if (rc < 0) {
                        dev_err(&state->i2c->dev,
                                "%s: Can't get FE TMCC data.\n", __func__);
                        rc = 0;         /* Status is OK */
                        goto error;
                }

                /* Get statistics */
                rc = mb86a20s_get_stats(fe, status_nr);
                if (rc < 0 && rc != -EBUSY) {
                        dev_err(&state->i2c->dev,
                                "%s: Can't get FE statistics.\n", __func__);
                        rc = 0;
                        goto error;
                }
                rc = 0; /* Don't return EBUSY to userspace */
        }
        goto ok;

error:
        mb86a20s_stats_not_ready(fe);

ok:
        if (fe->ops.i2c_gate_ctrl)
                fe->ops.i2c_gate_ctrl(fe, 1);

        return rc;
}

static int mb86a20s_read_signal_strength_from_cache(struct dvb_frontend *fe,
                                                    u16 *strength)
{
        struct dtv_frontend_properties *c = &fe->dtv_property_cache;


        *strength = c->strength.stat[0].uvalue;

        return 0;
}

static int mb86a20s_get_frontend_dummy(struct dvb_frontend *fe)
{
        /*
         * get_frontend is now handled together with other stats
         * retrival, when read_status() is called, as some statistics
         * will depend on the layers detection.
         */
        return 0;
};

static int mb86a20s_tune(struct dvb_frontend *fe,
                        bool re_tune,
                        unsigned int mode_flags,
                        unsigned int *delay,
                        fe_status_t *status)
{
        struct mb86a20s_state *state = fe->demodulator_priv;
        int rc = 0;

        dev_dbg(&state->i2c->dev, "%s called.\n", __func__);

        if (re_tune)
                rc = mb86a20s_set_frontend(fe);

        if (!(mode_flags & FE_TUNE_MODE_ONESHOT))
                mb86a20s_read_status_and_stats(fe, status);

        return rc;
}

static void mb86a20s_release(struct dvb_frontend *fe)
{
        struct mb86a20s_state *state = fe->demodulator_priv;

        dev_dbg(&state->i2c->dev, "%s called.\n", __func__);

        kfree(state);
}

static struct dvb_frontend_ops mb86a20s_ops;

struct dvb_frontend *mb86a20s_attach(const struct mb86a20s_config *config,
                                    struct i2c_adapter *i2c)
{
        struct mb86a20s_state *state;
        u8      rev;

        dev_dbg(&i2c->dev, "%s called.\n", __func__);

        /* allocate memory for the internal state */
        state = kzalloc(sizeof(struct mb86a20s_state), GFP_KERNEL);
        if (state == NULL) {
                dev_err(&i2c->dev,
                        "%s: unable to allocate memory for state\n", __func__);
                goto error;
        }

        /* setup the state */
        state->config = config;
        state->i2c = i2c;

        /* create dvb_frontend */
        memcpy(&state->frontend.ops, &mb86a20s_ops,
                sizeof(struct dvb_frontend_ops));
        state->frontend.demodulator_priv = state;

        /* Check if it is a mb86a20s frontend */
        rev = mb86a20s_readreg(state, 0);

        if (rev == 0x13) {
                dev_info(&i2c->dev,
                         "Detected a Fujitsu mb86a20s frontend\n");
        } else {
                dev_dbg(&i2c->dev,
                        "Frontend revision %d is unknown - aborting.\n",
                       rev);
                goto error;
        }

        return &state->frontend;

error:
        kfree(state);
        return NULL;
}
EXPORT_SYMBOL(mb86a20s_attach);

static struct dvb_frontend_ops mb86a20s_ops = {
        .delsys = { SYS_ISDBT },
        /* Use dib8000 values per default */
        .info = {
                .name = "Fujitsu mb86A20s",
                .caps = FE_CAN_RECOVER  |
                        FE_CAN_FEC_1_2  | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
                        FE_CAN_FEC_5_6  | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
                        FE_CAN_QPSK     | FE_CAN_QAM_16  | FE_CAN_QAM_64 |
                        FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_QAM_AUTO |
                        FE_CAN_GUARD_INTERVAL_AUTO    | FE_CAN_HIERARCHY_AUTO,
                /* Actually, those values depend on the used tuner */
                .frequency_min = 45000000,
                .frequency_max = 864000000,
                .frequency_stepsize = 62500,
        },

        .release = mb86a20s_release,

        .init = mb86a20s_initfe,
        .set_frontend = mb86a20s_set_frontend,
        .get_frontend = mb86a20s_get_frontend_dummy,
        .read_status = mb86a20s_read_status_and_stats,
        .read_signal_strength = mb86a20s_read_signal_strength_from_cache,
        .tune = mb86a20s_tune,
};

MODULE_DESCRIPTION("DVB Frontend module for Fujitsu mb86A20s hardware");
MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
MODULE_LICENSE("GPL");