linux/drivers/media/usb/dvb-usb/dibusb-mb.c
<<
>>
Prefs
   1/* DVB USB compliant linux driver for mobile DVB-T USB devices based on
   2 * reference designs made by DiBcom (http://www.dibcom.fr/) (DiB3000M-B)
   3 *
   4 * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de)
   5 *
   6 * based on GPL code from DiBcom, which has
   7 * Copyright (C) 2004 Amaury Demol for DiBcom (ademol@dibcom.fr)
   8 *
   9 *      This program is free software; you can redistribute it and/or modify it
  10 *      under the terms of the GNU General Public License as published by the Free
  11 *      Software Foundation, version 2.
  12 *
  13 * see Documentation/dvb/README.dvb-usb for more information
  14 */
  15#include "dibusb.h"
  16
  17DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
  18
  19static int dib3000mb_i2c_gate_ctrl(struct dvb_frontend* fe, int enable)
  20{
  21        struct dvb_usb_adapter *adap = fe->dvb->priv;
  22        struct dibusb_state *st = adap->priv;
  23
  24        return st->ops.tuner_pass_ctrl(fe, enable, st->tuner_addr);
  25}
  26
  27static int dibusb_dib3000mb_frontend_attach(struct dvb_usb_adapter *adap)
  28{
  29        struct dib3000_config demod_cfg;
  30        struct dibusb_state *st = adap->priv;
  31
  32        demod_cfg.demod_address = 0x8;
  33
  34        adap->fe_adap[0].fe = dvb_attach(dib3000mb_attach, &demod_cfg,
  35                                         &adap->dev->i2c_adap, &st->ops);
  36        if ((adap->fe_adap[0].fe) == NULL)
  37                return -ENODEV;
  38
  39        adap->fe_adap[0].fe->ops.i2c_gate_ctrl = dib3000mb_i2c_gate_ctrl;
  40
  41        return 0;
  42}
  43
  44static int dibusb_thomson_tuner_attach(struct dvb_usb_adapter *adap)
  45{
  46        struct dibusb_state *st = adap->priv;
  47
  48        st->tuner_addr = 0x61;
  49
  50        dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe, 0x61, &adap->dev->i2c_adap,
  51                   DVB_PLL_TUA6010XS);
  52        return 0;
  53}
  54
  55static int dibusb_panasonic_tuner_attach(struct dvb_usb_adapter *adap)
  56{
  57        struct dibusb_state *st = adap->priv;
  58
  59        st->tuner_addr = 0x60;
  60
  61        dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe, 0x60, &adap->dev->i2c_adap,
  62                   DVB_PLL_TDA665X);
  63        return 0;
  64}
  65
  66/* Some of the Artec 1.1 device aren't equipped with the default tuner
  67 * (Thomson Cable), but with a Panasonic ENV77H11D5.  This function figures
  68 * this out. */
  69static int dibusb_tuner_probe_and_attach(struct dvb_usb_adapter *adap)
  70{
  71        u8 b[2] = { 0,0 }, b2[1];
  72        int ret = 0;
  73        struct i2c_msg msg[2] = {
  74                { .flags = 0,        .buf = b,  .len = 2 },
  75                { .flags = I2C_M_RD, .buf = b2, .len = 1 },
  76        };
  77        struct dibusb_state *st = adap->priv;
  78
  79        /* the Panasonic sits on I2C addrass 0x60, the Thomson on 0x61 */
  80        msg[0].addr = msg[1].addr = st->tuner_addr = 0x60;
  81
  82        if (adap->fe_adap[0].fe->ops.i2c_gate_ctrl)
  83                adap->fe_adap[0].fe->ops.i2c_gate_ctrl(adap->fe_adap[0].fe, 1);
  84
  85        if (i2c_transfer(&adap->dev->i2c_adap, msg, 2) != 2) {
  86                err("tuner i2c write failed.");
  87                ret = -EREMOTEIO;
  88        }
  89
  90        if (adap->fe_adap[0].fe->ops.i2c_gate_ctrl)
  91                adap->fe_adap[0].fe->ops.i2c_gate_ctrl(adap->fe_adap[0].fe, 0);
  92
  93        if (b2[0] == 0xfe) {
  94                info("This device has the Thomson Cable onboard. Which is default.");
  95                ret = dibusb_thomson_tuner_attach(adap);
  96        } else {
  97                info("This device has the Panasonic ENV77H11D5 onboard.");
  98                ret = dibusb_panasonic_tuner_attach(adap);
  99        }
 100
 101        return ret;
 102}
 103
 104/* USB Driver stuff */
 105static struct dvb_usb_device_properties dibusb1_1_properties;
 106static struct dvb_usb_device_properties dibusb1_1_an2235_properties;
 107static struct dvb_usb_device_properties dibusb2_0b_properties;
 108static struct dvb_usb_device_properties artec_t1_usb2_properties;
 109
 110static int dibusb_probe(struct usb_interface *intf,
 111                const struct usb_device_id *id)
 112{
 113        if (0 == dvb_usb_device_init(intf, &dibusb1_1_properties,
 114                                     THIS_MODULE, NULL, adapter_nr) ||
 115            0 == dvb_usb_device_init(intf, &dibusb1_1_an2235_properties,
 116                                     THIS_MODULE, NULL, adapter_nr) ||
 117            0 == dvb_usb_device_init(intf, &dibusb2_0b_properties,
 118                                     THIS_MODULE, NULL, adapter_nr) ||
 119            0 == dvb_usb_device_init(intf, &artec_t1_usb2_properties,
 120                                     THIS_MODULE, NULL, adapter_nr))
 121                return 0;
 122
 123        return -EINVAL;
 124}
 125
 126/* do not change the order of the ID table */
 127static struct usb_device_id dibusb_dib3000mb_table [] = {
 128/* 00 */        { USB_DEVICE(USB_VID_WIDEVIEW,          USB_PID_AVERMEDIA_DVBT_USB_COLD) },
 129/* 01 */        { USB_DEVICE(USB_VID_WIDEVIEW,          USB_PID_AVERMEDIA_DVBT_USB_WARM) },
 130/* 02 */        { USB_DEVICE(USB_VID_COMPRO,            USB_PID_COMPRO_DVBU2000_COLD) },
 131/* 03 */        { USB_DEVICE(USB_VID_COMPRO,            USB_PID_COMPRO_DVBU2000_WARM) },
 132/* 04 */        { USB_DEVICE(USB_VID_COMPRO_UNK,        USB_PID_COMPRO_DVBU2000_UNK_COLD) },
 133/* 05 */        { USB_DEVICE(USB_VID_DIBCOM,            USB_PID_DIBCOM_MOD3000_COLD) },
 134/* 06 */        { USB_DEVICE(USB_VID_DIBCOM,            USB_PID_DIBCOM_MOD3000_WARM) },
 135/* 07 */        { USB_DEVICE(USB_VID_EMPIA,             USB_PID_KWORLD_VSTREAM_COLD) },
 136/* 08 */        { USB_DEVICE(USB_VID_EMPIA,             USB_PID_KWORLD_VSTREAM_WARM) },
 137/* 09 */        { USB_DEVICE(USB_VID_GRANDTEC,          USB_PID_GRANDTEC_DVBT_USB_COLD) },
 138/* 10 */        { USB_DEVICE(USB_VID_GRANDTEC,          USB_PID_GRANDTEC_DVBT_USB_WARM) },
 139/* 11 */        { USB_DEVICE(USB_VID_GRANDTEC,          USB_PID_DIBCOM_MOD3000_COLD) },
 140/* 12 */        { USB_DEVICE(USB_VID_GRANDTEC,          USB_PID_DIBCOM_MOD3000_WARM) },
 141/* 13 */        { USB_DEVICE(USB_VID_HYPER_PALTEK,      USB_PID_UNK_HYPER_PALTEK_COLD) },
 142/* 14 */        { USB_DEVICE(USB_VID_HYPER_PALTEK,      USB_PID_UNK_HYPER_PALTEK_WARM) },
 143/* 15 */        { USB_DEVICE(USB_VID_VISIONPLUS,        USB_PID_TWINHAN_VP7041_COLD) },
 144/* 16 */        { USB_DEVICE(USB_VID_VISIONPLUS,        USB_PID_TWINHAN_VP7041_WARM) },
 145/* 17 */        { USB_DEVICE(USB_VID_TWINHAN,           USB_PID_TWINHAN_VP7041_COLD) },
 146/* 18 */        { USB_DEVICE(USB_VID_TWINHAN,           USB_PID_TWINHAN_VP7041_WARM) },
 147/* 19 */        { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ULTIMA_TVBOX_COLD) },
 148/* 20 */        { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ULTIMA_TVBOX_WARM) },
 149/* 21 */        { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ULTIMA_TVBOX_AN2235_COLD) },
 150/* 22 */        { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ULTIMA_TVBOX_AN2235_WARM) },
 151/* 23 */        { USB_DEVICE(USB_VID_ADSTECH,           USB_PID_ADSTECH_USB2_COLD) },
 152
 153/* device ID with default DIBUSB2_0-firmware and with the hacked firmware */
 154/* 24 */        { USB_DEVICE(USB_VID_ADSTECH,           USB_PID_ADSTECH_USB2_WARM) },
 155/* 25 */        { USB_DEVICE(USB_VID_KYE,               USB_PID_KYE_DVB_T_COLD) },
 156/* 26 */        { USB_DEVICE(USB_VID_KYE,               USB_PID_KYE_DVB_T_WARM) },
 157
 158/* 27 */        { USB_DEVICE(USB_VID_KWORLD,            USB_PID_KWORLD_VSTREAM_COLD) },
 159
 160/* 28 */        { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ULTIMA_TVBOX_USB2_COLD) },
 161/* 29 */        { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ULTIMA_TVBOX_USB2_WARM) },
 162
 163/*
 164 * XXX: As Artec just 'forgot' to program the EEPROM on some Artec T1 devices
 165 *      we don't catch these faulty IDs (namely 'Cypress FX1 USB controller') that
 166 *      have been left on the device. If you don't have such a device but an Artec
 167 *      device that's supposed to work with this driver but is not detected by it,
 168 *      free to enable CONFIG_DVB_USB_DIBUSB_MB_FAULTY via your kernel config.
 169 */
 170
 171#ifdef CONFIG_DVB_USB_DIBUSB_MB_FAULTY
 172/* 30 */        { USB_DEVICE(USB_VID_ANCHOR,            USB_PID_ULTIMA_TVBOX_ANCHOR_COLD) },
 173#endif
 174
 175                        { }             /* Terminating entry */
 176};
 177MODULE_DEVICE_TABLE (usb, dibusb_dib3000mb_table);
 178
 179static struct dvb_usb_device_properties dibusb1_1_properties = {
 180        .caps =  DVB_USB_IS_AN_I2C_ADAPTER,
 181
 182        .usb_ctrl = CYPRESS_AN2135,
 183
 184        .firmware = "dvb-usb-dibusb-5.0.0.11.fw",
 185
 186        .num_adapters = 1,
 187        .adapter = {
 188                {
 189                .num_frontends = 1,
 190                .fe = {{
 191                        .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
 192                        .pid_filter_count = 16,
 193
 194                        .streaming_ctrl   = dibusb_streaming_ctrl,
 195                        .pid_filter       = dibusb_pid_filter,
 196                        .pid_filter_ctrl  = dibusb_pid_filter_ctrl,
 197                        .frontend_attach  = dibusb_dib3000mb_frontend_attach,
 198                        .tuner_attach     = dibusb_tuner_probe_and_attach,
 199
 200                        /* parameter for the MPEG2-data transfer */
 201                        .stream = {
 202                                .type = USB_BULK,
 203                                .count = 7,
 204                                .endpoint = 0x02,
 205                                .u = {
 206                                        .bulk = {
 207                                                .buffersize = 4096,
 208                                        }
 209                                }
 210                        },
 211                }},
 212                        .size_of_priv     = sizeof(struct dibusb_state),
 213                }
 214        },
 215
 216        .power_ctrl       = dibusb_power_ctrl,
 217
 218        .rc.legacy = {
 219                .rc_interval      = DEFAULT_RC_INTERVAL,
 220                .rc_map_table     = rc_map_dibusb_table,
 221                .rc_map_size      = 111, /* wow, that is ugly ... I want to load it to the driver dynamically */
 222                .rc_query         = dibusb_rc_query,
 223        },
 224
 225        .i2c_algo         = &dibusb_i2c_algo,
 226
 227        .generic_bulk_ctrl_endpoint = 0x01,
 228
 229        .num_device_descs = 9,
 230        .devices = {
 231                {       "AVerMedia AverTV DVBT USB1.1",
 232                        { &dibusb_dib3000mb_table[0],  NULL },
 233                        { &dibusb_dib3000mb_table[1],  NULL },
 234                },
 235                {       "Compro Videomate DVB-U2000 - DVB-T USB1.1 (please confirm to linux-dvb)",
 236                        { &dibusb_dib3000mb_table[2], &dibusb_dib3000mb_table[4], NULL},
 237                        { &dibusb_dib3000mb_table[3], NULL },
 238                },
 239                {       "DiBcom USB1.1 DVB-T reference design (MOD3000)",
 240                        { &dibusb_dib3000mb_table[5],  NULL },
 241                        { &dibusb_dib3000mb_table[6],  NULL },
 242                },
 243                {       "KWorld V-Stream XPERT DTV - DVB-T USB1.1",
 244                        { &dibusb_dib3000mb_table[7], NULL },
 245                        { &dibusb_dib3000mb_table[8], NULL },
 246                },
 247                {       "Grandtec USB1.1 DVB-T",
 248                        { &dibusb_dib3000mb_table[9],  &dibusb_dib3000mb_table[11], NULL },
 249                        { &dibusb_dib3000mb_table[10], &dibusb_dib3000mb_table[12], NULL },
 250                },
 251                {       "Unknown USB1.1 DVB-T device ???? please report the name to the author",
 252                        { &dibusb_dib3000mb_table[13], NULL },
 253                        { &dibusb_dib3000mb_table[14], NULL },
 254                },
 255                {       "TwinhanDTV USB-Ter USB1.1 / Magic Box I / HAMA USB1.1 DVB-T device",
 256                        { &dibusb_dib3000mb_table[15], &dibusb_dib3000mb_table[17], NULL},
 257                        { &dibusb_dib3000mb_table[16], &dibusb_dib3000mb_table[18], NULL},
 258                },
 259                {       "Artec T1 USB1.1 TVBOX with AN2135",
 260                        { &dibusb_dib3000mb_table[19], NULL },
 261                        { &dibusb_dib3000mb_table[20], NULL },
 262                },
 263                {       "VideoWalker DVB-T USB",
 264                        { &dibusb_dib3000mb_table[25], NULL },
 265                        { &dibusb_dib3000mb_table[26], NULL },
 266                },
 267        }
 268};
 269
 270static struct dvb_usb_device_properties dibusb1_1_an2235_properties = {
 271        .caps = DVB_USB_IS_AN_I2C_ADAPTER,
 272        .usb_ctrl = CYPRESS_AN2235,
 273
 274        .firmware = "dvb-usb-dibusb-an2235-01.fw",
 275
 276        .num_adapters = 1,
 277        .adapter = {
 278                {
 279                .num_frontends = 1,
 280                .fe = {{
 281                        .caps = DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF | DVB_USB_ADAP_HAS_PID_FILTER,
 282                        .pid_filter_count = 16,
 283
 284                        .streaming_ctrl   = dibusb_streaming_ctrl,
 285                        .pid_filter       = dibusb_pid_filter,
 286                        .pid_filter_ctrl  = dibusb_pid_filter_ctrl,
 287                        .frontend_attach  = dibusb_dib3000mb_frontend_attach,
 288                        .tuner_attach     = dibusb_tuner_probe_and_attach,
 289
 290                        /* parameter for the MPEG2-data transfer */
 291                        .stream = {
 292                                .type = USB_BULK,
 293                                .count = 7,
 294                                .endpoint = 0x02,
 295                                .u = {
 296                                        .bulk = {
 297                                                .buffersize = 4096,
 298                                        }
 299                                }
 300                        },
 301                }},
 302                        .size_of_priv     = sizeof(struct dibusb_state),
 303                },
 304        },
 305        .power_ctrl       = dibusb_power_ctrl,
 306
 307        .rc.legacy = {
 308                .rc_interval      = DEFAULT_RC_INTERVAL,
 309                .rc_map_table     = rc_map_dibusb_table,
 310                .rc_map_size      = 111, /* wow, that is ugly ... I want to load it to the driver dynamically */
 311                .rc_query         = dibusb_rc_query,
 312        },
 313
 314        .i2c_algo         = &dibusb_i2c_algo,
 315
 316        .generic_bulk_ctrl_endpoint = 0x01,
 317
 318#ifdef CONFIG_DVB_USB_DIBUSB_MB_FAULTY
 319        .num_device_descs = 2,
 320#else
 321        .num_device_descs = 1,
 322#endif
 323        .devices = {
 324                {       "Artec T1 USB1.1 TVBOX with AN2235",
 325                        { &dibusb_dib3000mb_table[21], NULL },
 326                        { &dibusb_dib3000mb_table[22], NULL },
 327                },
 328#ifdef CONFIG_DVB_USB_DIBUSB_MB_FAULTY
 329                {       "Artec T1 USB1.1 TVBOX with AN2235 (faulty USB IDs)",
 330                        { &dibusb_dib3000mb_table[30], NULL },
 331                        { NULL },
 332                },
 333                { NULL },
 334#endif
 335        }
 336};
 337
 338static struct dvb_usb_device_properties dibusb2_0b_properties = {
 339        .caps = DVB_USB_IS_AN_I2C_ADAPTER,
 340
 341        .usb_ctrl = CYPRESS_FX2,
 342
 343        .firmware = "dvb-usb-adstech-usb2-02.fw",
 344
 345        .num_adapters = 1,
 346        .adapter = {
 347                {
 348                .num_frontends = 1,
 349                .fe = {{
 350                        .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
 351                        .pid_filter_count = 16,
 352
 353                        .streaming_ctrl   = dibusb2_0_streaming_ctrl,
 354                        .pid_filter       = dibusb_pid_filter,
 355                        .pid_filter_ctrl  = dibusb_pid_filter_ctrl,
 356                        .frontend_attach  = dibusb_dib3000mb_frontend_attach,
 357                        .tuner_attach     = dibusb_thomson_tuner_attach,
 358
 359                        /* parameter for the MPEG2-data transfer */
 360                        .stream = {
 361                                .type = USB_BULK,
 362                                .count = 7,
 363                                .endpoint = 0x06,
 364                                .u = {
 365                                        .bulk = {
 366                                                .buffersize = 4096,
 367                                        }
 368                                }
 369                        },
 370                }},
 371                        .size_of_priv     = sizeof(struct dibusb_state),
 372                }
 373        },
 374        .power_ctrl       = dibusb2_0_power_ctrl,
 375
 376        .rc.legacy = {
 377                .rc_interval      = DEFAULT_RC_INTERVAL,
 378                .rc_map_table     = rc_map_dibusb_table,
 379                .rc_map_size      = 111, /* wow, that is ugly ... I want to load it to the driver dynamically */
 380                .rc_query         = dibusb_rc_query,
 381        },
 382
 383        .i2c_algo         = &dibusb_i2c_algo,
 384
 385        .generic_bulk_ctrl_endpoint = 0x01,
 386
 387        .num_device_descs = 2,
 388        .devices = {
 389                {       "KWorld/ADSTech Instant DVB-T USB2.0",
 390                        { &dibusb_dib3000mb_table[23], NULL },
 391                        { &dibusb_dib3000mb_table[24], NULL },
 392                },
 393                {       "KWorld Xpert DVB-T USB2.0",
 394                        { &dibusb_dib3000mb_table[27], NULL },
 395                        { NULL }
 396                },
 397                { NULL },
 398        }
 399};
 400
 401static struct dvb_usb_device_properties artec_t1_usb2_properties = {
 402        .caps = DVB_USB_IS_AN_I2C_ADAPTER,
 403
 404        .usb_ctrl = CYPRESS_FX2,
 405
 406        .firmware = "dvb-usb-dibusb-6.0.0.8.fw",
 407
 408        .num_adapters = 1,
 409        .adapter = {
 410                {
 411                .num_frontends = 1,
 412                .fe = {{
 413                        .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
 414                        .pid_filter_count = 16,
 415
 416                        .streaming_ctrl   = dibusb2_0_streaming_ctrl,
 417                        .pid_filter       = dibusb_pid_filter,
 418                        .pid_filter_ctrl  = dibusb_pid_filter_ctrl,
 419                        .frontend_attach  = dibusb_dib3000mb_frontend_attach,
 420                        .tuner_attach     = dibusb_tuner_probe_and_attach,
 421                        /* parameter for the MPEG2-data transfer */
 422                        .stream = {
 423                                .type = USB_BULK,
 424                                .count = 7,
 425                                .endpoint = 0x06,
 426                                .u = {
 427                                        .bulk = {
 428                                                .buffersize = 4096,
 429                                        }
 430                                }
 431                        },
 432                }},
 433                        .size_of_priv     = sizeof(struct dibusb_state),
 434                }
 435        },
 436        .power_ctrl       = dibusb2_0_power_ctrl,
 437
 438        .rc.legacy = {
 439                .rc_interval      = DEFAULT_RC_INTERVAL,
 440                .rc_map_table     = rc_map_dibusb_table,
 441                .rc_map_size      = 111, /* wow, that is ugly ... I want to load it to the driver dynamically */
 442                .rc_query         = dibusb_rc_query,
 443        },
 444
 445        .i2c_algo         = &dibusb_i2c_algo,
 446
 447        .generic_bulk_ctrl_endpoint = 0x01,
 448
 449        .num_device_descs = 1,
 450        .devices = {
 451                {       "Artec T1 USB2.0",
 452                        { &dibusb_dib3000mb_table[28], NULL },
 453                        { &dibusb_dib3000mb_table[29], NULL },
 454                },
 455                { NULL },
 456        }
 457};
 458
 459static struct usb_driver dibusb_driver = {
 460        .name           = "dvb_usb_dibusb_mb",
 461        .probe          = dibusb_probe,
 462        .disconnect = dvb_usb_device_exit,
 463        .id_table       = dibusb_dib3000mb_table,
 464};
 465
 466module_usb_driver(dibusb_driver);
 467
 468MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>");
 469MODULE_DESCRIPTION("Driver for DiBcom USB DVB-T devices (DiB3000M-B based)");
 470MODULE_VERSION("1.0");
 471MODULE_LICENSE("GPL");
 472