linux/drivers/mfd/menelaus.c
<<
>>
Prefs
   1/*
   2 * Copyright (C) 2004 Texas Instruments, Inc.
   3 *
   4 * Some parts based tps65010.c:
   5 * Copyright (C) 2004 Texas Instruments and
   6 * Copyright (C) 2004-2005 David Brownell
   7 *
   8 * Some parts based on tlv320aic24.c:
   9 * Copyright (C) by Kai Svahn <kai.svahn@nokia.com>
  10 *
  11 * Changes for interrupt handling and clean-up by
  12 * Tony Lindgren <tony@atomide.com> and Imre Deak <imre.deak@nokia.com>
  13 * Cleanup and generalized support for voltage setting by
  14 * Juha Yrjola
  15 * Added support for controlling VCORE and regulator sleep states,
  16 * Amit Kucheria <amit.kucheria@nokia.com>
  17 * Copyright (C) 2005, 2006 Nokia Corporation
  18 *
  19 * This program is free software; you can redistribute it and/or modify
  20 * it under the terms of the GNU General Public License as published by
  21 * the Free Software Foundation; either version 2 of the License, or
  22 * (at your option) any later version.
  23 *
  24 * This program is distributed in the hope that it will be useful,
  25 * but WITHOUT ANY WARRANTY; without even the implied warranty of
  26 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  27 * GNU General Public License for more details.
  28 *
  29 * You should have received a copy of the GNU General Public License
  30 * along with this program; if not, write to the Free Software
  31 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  32 */
  33
  34#include <linux/module.h>
  35#include <linux/i2c.h>
  36#include <linux/interrupt.h>
  37#include <linux/sched.h>
  38#include <linux/mutex.h>
  39#include <linux/workqueue.h>
  40#include <linux/delay.h>
  41#include <linux/rtc.h>
  42#include <linux/bcd.h>
  43#include <linux/slab.h>
  44#include <linux/mfd/menelaus.h>
  45
  46#include <asm/mach/irq.h>
  47
  48#include <asm/gpio.h>
  49
  50#define DRIVER_NAME                     "menelaus"
  51
  52#define MENELAUS_I2C_ADDRESS            0x72
  53
  54#define MENELAUS_REV                    0x01
  55#define MENELAUS_VCORE_CTRL1            0x02
  56#define MENELAUS_VCORE_CTRL2            0x03
  57#define MENELAUS_VCORE_CTRL3            0x04
  58#define MENELAUS_VCORE_CTRL4            0x05
  59#define MENELAUS_VCORE_CTRL5            0x06
  60#define MENELAUS_DCDC_CTRL1             0x07
  61#define MENELAUS_DCDC_CTRL2             0x08
  62#define MENELAUS_DCDC_CTRL3             0x09
  63#define MENELAUS_LDO_CTRL1              0x0A
  64#define MENELAUS_LDO_CTRL2              0x0B
  65#define MENELAUS_LDO_CTRL3              0x0C
  66#define MENELAUS_LDO_CTRL4              0x0D
  67#define MENELAUS_LDO_CTRL5              0x0E
  68#define MENELAUS_LDO_CTRL6              0x0F
  69#define MENELAUS_LDO_CTRL7              0x10
  70#define MENELAUS_LDO_CTRL8              0x11
  71#define MENELAUS_SLEEP_CTRL1            0x12
  72#define MENELAUS_SLEEP_CTRL2            0x13
  73#define MENELAUS_DEVICE_OFF             0x14
  74#define MENELAUS_OSC_CTRL               0x15
  75#define MENELAUS_DETECT_CTRL            0x16
  76#define MENELAUS_INT_MASK1              0x17
  77#define MENELAUS_INT_MASK2              0x18
  78#define MENELAUS_INT_STATUS1            0x19
  79#define MENELAUS_INT_STATUS2            0x1A
  80#define MENELAUS_INT_ACK1               0x1B
  81#define MENELAUS_INT_ACK2               0x1C
  82#define MENELAUS_GPIO_CTRL              0x1D
  83#define MENELAUS_GPIO_IN                0x1E
  84#define MENELAUS_GPIO_OUT               0x1F
  85#define MENELAUS_BBSMS                  0x20
  86#define MENELAUS_RTC_CTRL               0x21
  87#define MENELAUS_RTC_UPDATE             0x22
  88#define MENELAUS_RTC_SEC                0x23
  89#define MENELAUS_RTC_MIN                0x24
  90#define MENELAUS_RTC_HR                 0x25
  91#define MENELAUS_RTC_DAY                0x26
  92#define MENELAUS_RTC_MON                0x27
  93#define MENELAUS_RTC_YR                 0x28
  94#define MENELAUS_RTC_WKDAY              0x29
  95#define MENELAUS_RTC_AL_SEC             0x2A
  96#define MENELAUS_RTC_AL_MIN             0x2B
  97#define MENELAUS_RTC_AL_HR              0x2C
  98#define MENELAUS_RTC_AL_DAY             0x2D
  99#define MENELAUS_RTC_AL_MON             0x2E
 100#define MENELAUS_RTC_AL_YR              0x2F
 101#define MENELAUS_RTC_COMP_MSB           0x30
 102#define MENELAUS_RTC_COMP_LSB           0x31
 103#define MENELAUS_S1_PULL_EN             0x32
 104#define MENELAUS_S1_PULL_DIR            0x33
 105#define MENELAUS_S2_PULL_EN             0x34
 106#define MENELAUS_S2_PULL_DIR            0x35
 107#define MENELAUS_MCT_CTRL1              0x36
 108#define MENELAUS_MCT_CTRL2              0x37
 109#define MENELAUS_MCT_CTRL3              0x38
 110#define MENELAUS_MCT_PIN_ST             0x39
 111#define MENELAUS_DEBOUNCE1              0x3A
 112
 113#define IH_MENELAUS_IRQS                12
 114#define MENELAUS_MMC_S1CD_IRQ           0       /* MMC slot 1 card change */
 115#define MENELAUS_MMC_S2CD_IRQ           1       /* MMC slot 2 card change */
 116#define MENELAUS_MMC_S1D1_IRQ           2       /* MMC DAT1 low in slot 1 */
 117#define MENELAUS_MMC_S2D1_IRQ           3       /* MMC DAT1 low in slot 2 */
 118#define MENELAUS_LOWBAT_IRQ             4       /* Low battery */
 119#define MENELAUS_HOTDIE_IRQ             5       /* Hot die detect */
 120#define MENELAUS_UVLO_IRQ               6       /* UVLO detect */
 121#define MENELAUS_TSHUT_IRQ              7       /* Thermal shutdown */
 122#define MENELAUS_RTCTMR_IRQ             8       /* RTC timer */
 123#define MENELAUS_RTCALM_IRQ             9       /* RTC alarm */
 124#define MENELAUS_RTCERR_IRQ             10      /* RTC error */
 125#define MENELAUS_PSHBTN_IRQ             11      /* Push button */
 126#define MENELAUS_RESERVED12_IRQ         12      /* Reserved */
 127#define MENELAUS_RESERVED13_IRQ         13      /* Reserved */
 128#define MENELAUS_RESERVED14_IRQ         14      /* Reserved */
 129#define MENELAUS_RESERVED15_IRQ         15      /* Reserved */
 130
 131/* VCORE_CTRL1 register */
 132#define VCORE_CTRL1_BYP_COMP            (1 << 5)
 133#define VCORE_CTRL1_HW_NSW              (1 << 7)
 134
 135/* GPIO_CTRL register */
 136#define GPIO_CTRL_SLOTSELEN             (1 << 5)
 137#define GPIO_CTRL_SLPCTLEN              (1 << 6)
 138#define GPIO1_DIR_INPUT                 (1 << 0)
 139#define GPIO2_DIR_INPUT                 (1 << 1)
 140#define GPIO3_DIR_INPUT                 (1 << 2)
 141
 142/* MCT_CTRL1 register */
 143#define MCT_CTRL1_S1_CMD_OD             (1 << 2)
 144#define MCT_CTRL1_S2_CMD_OD             (1 << 3)
 145
 146/* MCT_CTRL2 register */
 147#define MCT_CTRL2_VS2_SEL_D0            (1 << 0)
 148#define MCT_CTRL2_VS2_SEL_D1            (1 << 1)
 149#define MCT_CTRL2_S1CD_BUFEN            (1 << 4)
 150#define MCT_CTRL2_S2CD_BUFEN            (1 << 5)
 151#define MCT_CTRL2_S1CD_DBEN             (1 << 6)
 152#define MCT_CTRL2_S2CD_BEN              (1 << 7)
 153
 154/* MCT_CTRL3 register */
 155#define MCT_CTRL3_SLOT1_EN              (1 << 0)
 156#define MCT_CTRL3_SLOT2_EN              (1 << 1)
 157#define MCT_CTRL3_S1_AUTO_EN            (1 << 2)
 158#define MCT_CTRL3_S2_AUTO_EN            (1 << 3)
 159
 160/* MCT_PIN_ST register */
 161#define MCT_PIN_ST_S1_CD_ST             (1 << 0)
 162#define MCT_PIN_ST_S2_CD_ST             (1 << 1)
 163
 164static void menelaus_work(struct work_struct *_menelaus);
 165
 166struct menelaus_chip {
 167        struct mutex            lock;
 168        struct i2c_client       *client;
 169        struct work_struct      work;
 170#ifdef CONFIG_RTC_DRV_TWL92330
 171        struct rtc_device       *rtc;
 172        u8                      rtc_control;
 173        unsigned                uie:1;
 174#endif
 175        unsigned                vcore_hw_mode:1;
 176        u8                      mask1, mask2;
 177        void                    (*handlers[16])(struct menelaus_chip *);
 178        void                    (*mmc_callback)(void *data, u8 mask);
 179        void                    *mmc_callback_data;
 180};
 181
 182static struct menelaus_chip *the_menelaus;
 183
 184static int menelaus_write_reg(int reg, u8 value)
 185{
 186        int val = i2c_smbus_write_byte_data(the_menelaus->client, reg, value);
 187
 188        if (val < 0) {
 189                pr_err(DRIVER_NAME ": write error");
 190                return val;
 191        }
 192
 193        return 0;
 194}
 195
 196static int menelaus_read_reg(int reg)
 197{
 198        int val = i2c_smbus_read_byte_data(the_menelaus->client, reg);
 199
 200        if (val < 0)
 201                pr_err(DRIVER_NAME ": read error");
 202
 203        return val;
 204}
 205
 206static int menelaus_enable_irq(int irq)
 207{
 208        if (irq > 7) {
 209                irq -= 8;
 210                the_menelaus->mask2 &= ~(1 << irq);
 211                return menelaus_write_reg(MENELAUS_INT_MASK2,
 212                                the_menelaus->mask2);
 213        } else {
 214                the_menelaus->mask1 &= ~(1 << irq);
 215                return menelaus_write_reg(MENELAUS_INT_MASK1,
 216                                the_menelaus->mask1);
 217        }
 218}
 219
 220static int menelaus_disable_irq(int irq)
 221{
 222        if (irq > 7) {
 223                irq -= 8;
 224                the_menelaus->mask2 |= (1 << irq);
 225                return menelaus_write_reg(MENELAUS_INT_MASK2,
 226                                the_menelaus->mask2);
 227        } else {
 228                the_menelaus->mask1 |= (1 << irq);
 229                return menelaus_write_reg(MENELAUS_INT_MASK1,
 230                                the_menelaus->mask1);
 231        }
 232}
 233
 234static int menelaus_ack_irq(int irq)
 235{
 236        if (irq > 7)
 237                return menelaus_write_reg(MENELAUS_INT_ACK2, 1 << (irq - 8));
 238        else
 239                return menelaus_write_reg(MENELAUS_INT_ACK1, 1 << irq);
 240}
 241
 242/* Adds a handler for an interrupt. Does not run in interrupt context */
 243static int menelaus_add_irq_work(int irq,
 244                void (*handler)(struct menelaus_chip *))
 245{
 246        int ret = 0;
 247
 248        mutex_lock(&the_menelaus->lock);
 249        the_menelaus->handlers[irq] = handler;
 250        ret = menelaus_enable_irq(irq);
 251        mutex_unlock(&the_menelaus->lock);
 252
 253        return ret;
 254}
 255
 256/* Removes handler for an interrupt */
 257static int menelaus_remove_irq_work(int irq)
 258{
 259        int ret = 0;
 260
 261        mutex_lock(&the_menelaus->lock);
 262        ret = menelaus_disable_irq(irq);
 263        the_menelaus->handlers[irq] = NULL;
 264        mutex_unlock(&the_menelaus->lock);
 265
 266        return ret;
 267}
 268
 269/*
 270 * Gets scheduled when a card detect interrupt happens. Note that in some cases
 271 * this line is wired to card cover switch rather than the card detect switch
 272 * in each slot. In this case the cards are not seen by menelaus.
 273 * FIXME: Add handling for D1 too
 274 */
 275static void menelaus_mmc_cd_work(struct menelaus_chip *menelaus_hw)
 276{
 277        int reg;
 278        unsigned char card_mask = 0;
 279
 280        reg = menelaus_read_reg(MENELAUS_MCT_PIN_ST);
 281        if (reg < 0)
 282                return;
 283
 284        if (!(reg & 0x1))
 285                card_mask |= MCT_PIN_ST_S1_CD_ST;
 286
 287        if (!(reg & 0x2))
 288                card_mask |= MCT_PIN_ST_S2_CD_ST;
 289
 290        if (menelaus_hw->mmc_callback)
 291                menelaus_hw->mmc_callback(menelaus_hw->mmc_callback_data,
 292                                          card_mask);
 293}
 294
 295/*
 296 * Toggles the MMC slots between open-drain and push-pull mode.
 297 */
 298int menelaus_set_mmc_opendrain(int slot, int enable)
 299{
 300        int ret, val;
 301
 302        if (slot != 1 && slot != 2)
 303                return -EINVAL;
 304        mutex_lock(&the_menelaus->lock);
 305        ret = menelaus_read_reg(MENELAUS_MCT_CTRL1);
 306        if (ret < 0) {
 307                mutex_unlock(&the_menelaus->lock);
 308                return ret;
 309        }
 310        val = ret;
 311        if (slot == 1) {
 312                if (enable)
 313                        val |= MCT_CTRL1_S1_CMD_OD;
 314                else
 315                        val &= ~MCT_CTRL1_S1_CMD_OD;
 316        } else {
 317                if (enable)
 318                        val |= MCT_CTRL1_S2_CMD_OD;
 319                else
 320                        val &= ~MCT_CTRL1_S2_CMD_OD;
 321        }
 322        ret = menelaus_write_reg(MENELAUS_MCT_CTRL1, val);
 323        mutex_unlock(&the_menelaus->lock);
 324
 325        return ret;
 326}
 327EXPORT_SYMBOL(menelaus_set_mmc_opendrain);
 328
 329int menelaus_set_slot_sel(int enable)
 330{
 331        int ret;
 332
 333        mutex_lock(&the_menelaus->lock);
 334        ret = menelaus_read_reg(MENELAUS_GPIO_CTRL);
 335        if (ret < 0)
 336                goto out;
 337        ret |= GPIO2_DIR_INPUT;
 338        if (enable)
 339                ret |= GPIO_CTRL_SLOTSELEN;
 340        else
 341                ret &= ~GPIO_CTRL_SLOTSELEN;
 342        ret = menelaus_write_reg(MENELAUS_GPIO_CTRL, ret);
 343out:
 344        mutex_unlock(&the_menelaus->lock);
 345        return ret;
 346}
 347EXPORT_SYMBOL(menelaus_set_slot_sel);
 348
 349int menelaus_set_mmc_slot(int slot, int enable, int power, int cd_en)
 350{
 351        int ret, val;
 352
 353        if (slot != 1 && slot != 2)
 354                return -EINVAL;
 355        if (power >= 3)
 356                return -EINVAL;
 357
 358        mutex_lock(&the_menelaus->lock);
 359
 360        ret = menelaus_read_reg(MENELAUS_MCT_CTRL2);
 361        if (ret < 0)
 362                goto out;
 363        val = ret;
 364        if (slot == 1) {
 365                if (cd_en)
 366                        val |= MCT_CTRL2_S1CD_BUFEN | MCT_CTRL2_S1CD_DBEN;
 367                else
 368                        val &= ~(MCT_CTRL2_S1CD_BUFEN | MCT_CTRL2_S1CD_DBEN);
 369        } else {
 370                if (cd_en)
 371                        val |= MCT_CTRL2_S2CD_BUFEN | MCT_CTRL2_S2CD_BEN;
 372                else
 373                        val &= ~(MCT_CTRL2_S2CD_BUFEN | MCT_CTRL2_S2CD_BEN);
 374        }
 375        ret = menelaus_write_reg(MENELAUS_MCT_CTRL2, val);
 376        if (ret < 0)
 377                goto out;
 378
 379        ret = menelaus_read_reg(MENELAUS_MCT_CTRL3);
 380        if (ret < 0)
 381                goto out;
 382        val = ret;
 383        if (slot == 1) {
 384                if (enable)
 385                        val |= MCT_CTRL3_SLOT1_EN;
 386                else
 387                        val &= ~MCT_CTRL3_SLOT1_EN;
 388        } else {
 389                int b;
 390
 391                if (enable)
 392                        val |= MCT_CTRL3_SLOT2_EN;
 393                else
 394                        val &= ~MCT_CTRL3_SLOT2_EN;
 395                b = menelaus_read_reg(MENELAUS_MCT_CTRL2);
 396                b &= ~(MCT_CTRL2_VS2_SEL_D0 | MCT_CTRL2_VS2_SEL_D1);
 397                b |= power;
 398                ret = menelaus_write_reg(MENELAUS_MCT_CTRL2, b);
 399                if (ret < 0)
 400                        goto out;
 401        }
 402        /* Disable autonomous shutdown */
 403        val &= ~(MCT_CTRL3_S1_AUTO_EN | MCT_CTRL3_S2_AUTO_EN);
 404        ret = menelaus_write_reg(MENELAUS_MCT_CTRL3, val);
 405out:
 406        mutex_unlock(&the_menelaus->lock);
 407        return ret;
 408}
 409EXPORT_SYMBOL(menelaus_set_mmc_slot);
 410
 411int menelaus_register_mmc_callback(void (*callback)(void *data, u8 card_mask),
 412                                   void *data)
 413{
 414        int ret = 0;
 415
 416        the_menelaus->mmc_callback_data = data;
 417        the_menelaus->mmc_callback = callback;
 418        ret = menelaus_add_irq_work(MENELAUS_MMC_S1CD_IRQ,
 419                                    menelaus_mmc_cd_work);
 420        if (ret < 0)
 421                return ret;
 422        ret = menelaus_add_irq_work(MENELAUS_MMC_S2CD_IRQ,
 423                                    menelaus_mmc_cd_work);
 424        if (ret < 0)
 425                return ret;
 426        ret = menelaus_add_irq_work(MENELAUS_MMC_S1D1_IRQ,
 427                                    menelaus_mmc_cd_work);
 428        if (ret < 0)
 429                return ret;
 430        ret = menelaus_add_irq_work(MENELAUS_MMC_S2D1_IRQ,
 431                                    menelaus_mmc_cd_work);
 432
 433        return ret;
 434}
 435EXPORT_SYMBOL(menelaus_register_mmc_callback);
 436
 437void menelaus_unregister_mmc_callback(void)
 438{
 439        menelaus_remove_irq_work(MENELAUS_MMC_S1CD_IRQ);
 440        menelaus_remove_irq_work(MENELAUS_MMC_S2CD_IRQ);
 441        menelaus_remove_irq_work(MENELAUS_MMC_S1D1_IRQ);
 442        menelaus_remove_irq_work(MENELAUS_MMC_S2D1_IRQ);
 443
 444        the_menelaus->mmc_callback = NULL;
 445        the_menelaus->mmc_callback_data = NULL;
 446}
 447EXPORT_SYMBOL(menelaus_unregister_mmc_callback);
 448
 449struct menelaus_vtg {
 450        const char *name;
 451        u8 vtg_reg;
 452        u8 vtg_shift;
 453        u8 vtg_bits;
 454        u8 mode_reg;
 455};
 456
 457struct menelaus_vtg_value {
 458        u16 vtg;
 459        u16 val;
 460};
 461
 462static int menelaus_set_voltage(const struct menelaus_vtg *vtg, int mV,
 463                                int vtg_val, int mode)
 464{
 465        int val, ret;
 466        struct i2c_client *c = the_menelaus->client;
 467
 468        mutex_lock(&the_menelaus->lock);
 469        if (!vtg)
 470                goto set_voltage;
 471
 472        ret = menelaus_read_reg(vtg->vtg_reg);
 473        if (ret < 0)
 474                goto out;
 475        val = ret & ~(((1 << vtg->vtg_bits) - 1) << vtg->vtg_shift);
 476        val |= vtg_val << vtg->vtg_shift;
 477
 478        dev_dbg(&c->dev, "Setting voltage '%s'"
 479                         "to %d mV (reg 0x%02x, val 0x%02x)\n",
 480                        vtg->name, mV, vtg->vtg_reg, val);
 481
 482        ret = menelaus_write_reg(vtg->vtg_reg, val);
 483        if (ret < 0)
 484                goto out;
 485set_voltage:
 486        ret = menelaus_write_reg(vtg->mode_reg, mode);
 487out:
 488        mutex_unlock(&the_menelaus->lock);
 489        if (ret == 0) {
 490                /* Wait for voltage to stabilize */
 491                msleep(1);
 492        }
 493        return ret;
 494}
 495
 496static int menelaus_get_vtg_value(int vtg, const struct menelaus_vtg_value *tbl,
 497                                  int n)
 498{
 499        int i;
 500
 501        for (i = 0; i < n; i++, tbl++)
 502                if (tbl->vtg == vtg)
 503                        return tbl->val;
 504        return -EINVAL;
 505}
 506
 507/*
 508 * Vcore can be programmed in two ways:
 509 * SW-controlled: Required voltage is programmed into VCORE_CTRL1
 510 * HW-controlled: Required range (roof-floor) is programmed into VCORE_CTRL3
 511 * and VCORE_CTRL4
 512 *
 513 * Call correct 'set' function accordingly
 514 */
 515
 516static const struct menelaus_vtg_value vcore_values[] = {
 517        { 1000, 0 },
 518        { 1025, 1 },
 519        { 1050, 2 },
 520        { 1075, 3 },
 521        { 1100, 4 },
 522        { 1125, 5 },
 523        { 1150, 6 },
 524        { 1175, 7 },
 525        { 1200, 8 },
 526        { 1225, 9 },
 527        { 1250, 10 },
 528        { 1275, 11 },
 529        { 1300, 12 },
 530        { 1325, 13 },
 531        { 1350, 14 },
 532        { 1375, 15 },
 533        { 1400, 16 },
 534        { 1425, 17 },
 535        { 1450, 18 },
 536};
 537
 538int menelaus_set_vcore_sw(unsigned int mV)
 539{
 540        int val, ret;
 541        struct i2c_client *c = the_menelaus->client;
 542
 543        val = menelaus_get_vtg_value(mV, vcore_values,
 544                                     ARRAY_SIZE(vcore_values));
 545        if (val < 0)
 546                return -EINVAL;
 547
 548        dev_dbg(&c->dev, "Setting VCORE to %d mV (val 0x%02x)\n", mV, val);
 549
 550        /* Set SW mode and the voltage in one go. */
 551        mutex_lock(&the_menelaus->lock);
 552        ret = menelaus_write_reg(MENELAUS_VCORE_CTRL1, val);
 553        if (ret == 0)
 554                the_menelaus->vcore_hw_mode = 0;
 555        mutex_unlock(&the_menelaus->lock);
 556        msleep(1);
 557
 558        return ret;
 559}
 560
 561int menelaus_set_vcore_hw(unsigned int roof_mV, unsigned int floor_mV)
 562{
 563        int fval, rval, val, ret;
 564        struct i2c_client *c = the_menelaus->client;
 565
 566        rval = menelaus_get_vtg_value(roof_mV, vcore_values,
 567                                      ARRAY_SIZE(vcore_values));
 568        if (rval < 0)
 569                return -EINVAL;
 570        fval = menelaus_get_vtg_value(floor_mV, vcore_values,
 571                                      ARRAY_SIZE(vcore_values));
 572        if (fval < 0)
 573                return -EINVAL;
 574
 575        dev_dbg(&c->dev, "Setting VCORE FLOOR to %d mV and ROOF to %d mV\n",
 576               floor_mV, roof_mV);
 577
 578        mutex_lock(&the_menelaus->lock);
 579        ret = menelaus_write_reg(MENELAUS_VCORE_CTRL3, fval);
 580        if (ret < 0)
 581                goto out;
 582        ret = menelaus_write_reg(MENELAUS_VCORE_CTRL4, rval);
 583        if (ret < 0)
 584                goto out;
 585        if (!the_menelaus->vcore_hw_mode) {
 586                val = menelaus_read_reg(MENELAUS_VCORE_CTRL1);
 587                /* HW mode, turn OFF byte comparator */
 588                val |= (VCORE_CTRL1_HW_NSW | VCORE_CTRL1_BYP_COMP);
 589                ret = menelaus_write_reg(MENELAUS_VCORE_CTRL1, val);
 590                the_menelaus->vcore_hw_mode = 1;
 591        }
 592        msleep(1);
 593out:
 594        mutex_unlock(&the_menelaus->lock);
 595        return ret;
 596}
 597
 598static const struct menelaus_vtg vmem_vtg = {
 599        .name = "VMEM",
 600        .vtg_reg = MENELAUS_LDO_CTRL1,
 601        .vtg_shift = 0,
 602        .vtg_bits = 2,
 603        .mode_reg = MENELAUS_LDO_CTRL3,
 604};
 605
 606static const struct menelaus_vtg_value vmem_values[] = {
 607        { 1500, 0 },
 608        { 1800, 1 },
 609        { 1900, 2 },
 610        { 2500, 3 },
 611};
 612
 613int menelaus_set_vmem(unsigned int mV)
 614{
 615        int val;
 616
 617        if (mV == 0)
 618                return menelaus_set_voltage(&vmem_vtg, 0, 0, 0);
 619
 620        val = menelaus_get_vtg_value(mV, vmem_values, ARRAY_SIZE(vmem_values));
 621        if (val < 0)
 622                return -EINVAL;
 623        return menelaus_set_voltage(&vmem_vtg, mV, val, 0x02);
 624}
 625EXPORT_SYMBOL(menelaus_set_vmem);
 626
 627static const struct menelaus_vtg vio_vtg = {
 628        .name = "VIO",
 629        .vtg_reg = MENELAUS_LDO_CTRL1,
 630        .vtg_shift = 2,
 631        .vtg_bits = 2,
 632        .mode_reg = MENELAUS_LDO_CTRL4,
 633};
 634
 635static const struct menelaus_vtg_value vio_values[] = {
 636        { 1500, 0 },
 637        { 1800, 1 },
 638        { 2500, 2 },
 639        { 2800, 3 },
 640};
 641
 642int menelaus_set_vio(unsigned int mV)
 643{
 644        int val;
 645
 646        if (mV == 0)
 647                return menelaus_set_voltage(&vio_vtg, 0, 0, 0);
 648
 649        val = menelaus_get_vtg_value(mV, vio_values, ARRAY_SIZE(vio_values));
 650        if (val < 0)
 651                return -EINVAL;
 652        return menelaus_set_voltage(&vio_vtg, mV, val, 0x02);
 653}
 654EXPORT_SYMBOL(menelaus_set_vio);
 655
 656static const struct menelaus_vtg_value vdcdc_values[] = {
 657        { 1500, 0 },
 658        { 1800, 1 },
 659        { 2000, 2 },
 660        { 2200, 3 },
 661        { 2400, 4 },
 662        { 2800, 5 },
 663        { 3000, 6 },
 664        { 3300, 7 },
 665};
 666
 667static const struct menelaus_vtg vdcdc2_vtg = {
 668        .name = "VDCDC2",
 669        .vtg_reg = MENELAUS_DCDC_CTRL1,
 670        .vtg_shift = 0,
 671        .vtg_bits = 3,
 672        .mode_reg = MENELAUS_DCDC_CTRL2,
 673};
 674
 675static const struct menelaus_vtg vdcdc3_vtg = {
 676        .name = "VDCDC3",
 677        .vtg_reg = MENELAUS_DCDC_CTRL1,
 678        .vtg_shift = 3,
 679        .vtg_bits = 3,
 680        .mode_reg = MENELAUS_DCDC_CTRL3,
 681};
 682
 683int menelaus_set_vdcdc(int dcdc, unsigned int mV)
 684{
 685        const struct menelaus_vtg *vtg;
 686        int val;
 687
 688        if (dcdc != 2 && dcdc != 3)
 689                return -EINVAL;
 690        if (dcdc == 2)
 691                vtg = &vdcdc2_vtg;
 692        else
 693                vtg = &vdcdc3_vtg;
 694
 695        if (mV == 0)
 696                return menelaus_set_voltage(vtg, 0, 0, 0);
 697
 698        val = menelaus_get_vtg_value(mV, vdcdc_values,
 699                                     ARRAY_SIZE(vdcdc_values));
 700        if (val < 0)
 701                return -EINVAL;
 702        return menelaus_set_voltage(vtg, mV, val, 0x03);
 703}
 704
 705static const struct menelaus_vtg_value vmmc_values[] = {
 706        { 1850, 0 },
 707        { 2800, 1 },
 708        { 3000, 2 },
 709        { 3100, 3 },
 710};
 711
 712static const struct menelaus_vtg vmmc_vtg = {
 713        .name = "VMMC",
 714        .vtg_reg = MENELAUS_LDO_CTRL1,
 715        .vtg_shift = 6,
 716        .vtg_bits = 2,
 717        .mode_reg = MENELAUS_LDO_CTRL7,
 718};
 719
 720int menelaus_set_vmmc(unsigned int mV)
 721{
 722        int val;
 723
 724        if (mV == 0)
 725                return menelaus_set_voltage(&vmmc_vtg, 0, 0, 0);
 726
 727        val = menelaus_get_vtg_value(mV, vmmc_values, ARRAY_SIZE(vmmc_values));
 728        if (val < 0)
 729                return -EINVAL;
 730        return menelaus_set_voltage(&vmmc_vtg, mV, val, 0x02);
 731}
 732EXPORT_SYMBOL(menelaus_set_vmmc);
 733
 734
 735static const struct menelaus_vtg_value vaux_values[] = {
 736        { 1500, 0 },
 737        { 1800, 1 },
 738        { 2500, 2 },
 739        { 2800, 3 },
 740};
 741
 742static const struct menelaus_vtg vaux_vtg = {
 743        .name = "VAUX",
 744        .vtg_reg = MENELAUS_LDO_CTRL1,
 745        .vtg_shift = 4,
 746        .vtg_bits = 2,
 747        .mode_reg = MENELAUS_LDO_CTRL6,
 748};
 749
 750int menelaus_set_vaux(unsigned int mV)
 751{
 752        int val;
 753
 754        if (mV == 0)
 755                return menelaus_set_voltage(&vaux_vtg, 0, 0, 0);
 756
 757        val = menelaus_get_vtg_value(mV, vaux_values, ARRAY_SIZE(vaux_values));
 758        if (val < 0)
 759                return -EINVAL;
 760        return menelaus_set_voltage(&vaux_vtg, mV, val, 0x02);
 761}
 762EXPORT_SYMBOL(menelaus_set_vaux);
 763
 764int menelaus_get_slot_pin_states(void)
 765{
 766        return menelaus_read_reg(MENELAUS_MCT_PIN_ST);
 767}
 768EXPORT_SYMBOL(menelaus_get_slot_pin_states);
 769
 770int menelaus_set_regulator_sleep(int enable, u32 val)
 771{
 772        int t, ret;
 773        struct i2c_client *c = the_menelaus->client;
 774
 775        mutex_lock(&the_menelaus->lock);
 776        ret = menelaus_write_reg(MENELAUS_SLEEP_CTRL2, val);
 777        if (ret < 0)
 778                goto out;
 779
 780        dev_dbg(&c->dev, "regulator sleep configuration: %02x\n", val);
 781
 782        ret = menelaus_read_reg(MENELAUS_GPIO_CTRL);
 783        if (ret < 0)
 784                goto out;
 785        t = (GPIO_CTRL_SLPCTLEN | GPIO3_DIR_INPUT);
 786        if (enable)
 787                ret |= t;
 788        else
 789                ret &= ~t;
 790        ret = menelaus_write_reg(MENELAUS_GPIO_CTRL, ret);
 791out:
 792        mutex_unlock(&the_menelaus->lock);
 793        return ret;
 794}
 795
 796/*-----------------------------------------------------------------------*/
 797
 798/* Handles Menelaus interrupts. Does not run in interrupt context */
 799static void menelaus_work(struct work_struct *_menelaus)
 800{
 801        struct menelaus_chip *menelaus =
 802                        container_of(_menelaus, struct menelaus_chip, work);
 803        void (*handler)(struct menelaus_chip *menelaus);
 804
 805        while (1) {
 806                unsigned isr;
 807
 808                isr = (menelaus_read_reg(MENELAUS_INT_STATUS2)
 809                                & ~menelaus->mask2) << 8;
 810                isr |= menelaus_read_reg(MENELAUS_INT_STATUS1)
 811                                & ~menelaus->mask1;
 812                if (!isr)
 813                        break;
 814
 815                while (isr) {
 816                        int irq = fls(isr) - 1;
 817                        isr &= ~(1 << irq);
 818
 819                        mutex_lock(&menelaus->lock);
 820                        menelaus_disable_irq(irq);
 821                        menelaus_ack_irq(irq);
 822                        handler = menelaus->handlers[irq];
 823                        if (handler)
 824                                handler(menelaus);
 825                        menelaus_enable_irq(irq);
 826                        mutex_unlock(&menelaus->lock);
 827                }
 828        }
 829        enable_irq(menelaus->client->irq);
 830}
 831
 832/*
 833 * We cannot use I2C in interrupt context, so we just schedule work.
 834 */
 835static irqreturn_t menelaus_irq(int irq, void *_menelaus)
 836{
 837        struct menelaus_chip *menelaus = _menelaus;
 838
 839        disable_irq_nosync(irq);
 840        (void)schedule_work(&menelaus->work);
 841
 842        return IRQ_HANDLED;
 843}
 844
 845/*-----------------------------------------------------------------------*/
 846
 847/*
 848 * The RTC needs to be set once, then it runs on backup battery power.
 849 * It supports alarms, including system wake alarms (from some modes);
 850 * and 1/second IRQs if requested.
 851 */
 852#ifdef CONFIG_RTC_DRV_TWL92330
 853
 854#define RTC_CTRL_RTC_EN         (1 << 0)
 855#define RTC_CTRL_AL_EN          (1 << 1)
 856#define RTC_CTRL_MODE12         (1 << 2)
 857#define RTC_CTRL_EVERY_MASK     (3 << 3)
 858#define RTC_CTRL_EVERY_SEC      (0 << 3)
 859#define RTC_CTRL_EVERY_MIN      (1 << 3)
 860#define RTC_CTRL_EVERY_HR       (2 << 3)
 861#define RTC_CTRL_EVERY_DAY      (3 << 3)
 862
 863#define RTC_UPDATE_EVERY        0x08
 864
 865#define RTC_HR_PM               (1 << 7)
 866
 867static void menelaus_to_time(char *regs, struct rtc_time *t)
 868{
 869        t->tm_sec = bcd2bin(regs[0]);
 870        t->tm_min = bcd2bin(regs[1]);
 871        if (the_menelaus->rtc_control & RTC_CTRL_MODE12) {
 872                t->tm_hour = bcd2bin(regs[2] & 0x1f) - 1;
 873                if (regs[2] & RTC_HR_PM)
 874                        t->tm_hour += 12;
 875        } else
 876                t->tm_hour = bcd2bin(regs[2] & 0x3f);
 877        t->tm_mday = bcd2bin(regs[3]);
 878        t->tm_mon = bcd2bin(regs[4]) - 1;
 879        t->tm_year = bcd2bin(regs[5]) + 100;
 880}
 881
 882static int time_to_menelaus(struct rtc_time *t, int regnum)
 883{
 884        int     hour, status;
 885
 886        status = menelaus_write_reg(regnum++, bin2bcd(t->tm_sec));
 887        if (status < 0)
 888                goto fail;
 889
 890        status = menelaus_write_reg(regnum++, bin2bcd(t->tm_min));
 891        if (status < 0)
 892                goto fail;
 893
 894        if (the_menelaus->rtc_control & RTC_CTRL_MODE12) {
 895                hour = t->tm_hour + 1;
 896                if (hour > 12)
 897                        hour = RTC_HR_PM | bin2bcd(hour - 12);
 898                else
 899                        hour = bin2bcd(hour);
 900        } else
 901                hour = bin2bcd(t->tm_hour);
 902        status = menelaus_write_reg(regnum++, hour);
 903        if (status < 0)
 904                goto fail;
 905
 906        status = menelaus_write_reg(regnum++, bin2bcd(t->tm_mday));
 907        if (status < 0)
 908                goto fail;
 909
 910        status = menelaus_write_reg(regnum++, bin2bcd(t->tm_mon + 1));
 911        if (status < 0)
 912                goto fail;
 913
 914        status = menelaus_write_reg(regnum++, bin2bcd(t->tm_year - 100));
 915        if (status < 0)
 916                goto fail;
 917
 918        return 0;
 919fail:
 920        dev_err(&the_menelaus->client->dev, "rtc write reg %02x, err %d\n",
 921                        --regnum, status);
 922        return status;
 923}
 924
 925static int menelaus_read_time(struct device *dev, struct rtc_time *t)
 926{
 927        struct i2c_msg  msg[2];
 928        char            regs[7];
 929        int             status;
 930
 931        /* block read date and time registers */
 932        regs[0] = MENELAUS_RTC_SEC;
 933
 934        msg[0].addr = MENELAUS_I2C_ADDRESS;
 935        msg[0].flags = 0;
 936        msg[0].len = 1;
 937        msg[0].buf = regs;
 938
 939        msg[1].addr = MENELAUS_I2C_ADDRESS;
 940        msg[1].flags = I2C_M_RD;
 941        msg[1].len = sizeof(regs);
 942        msg[1].buf = regs;
 943
 944        status = i2c_transfer(the_menelaus->client->adapter, msg, 2);
 945        if (status != 2) {
 946                dev_err(dev, "%s error %d\n", "read", status);
 947                return -EIO;
 948        }
 949
 950        menelaus_to_time(regs, t);
 951        t->tm_wday = bcd2bin(regs[6]);
 952
 953        return 0;
 954}
 955
 956static int menelaus_set_time(struct device *dev, struct rtc_time *t)
 957{
 958        int             status;
 959
 960        /* write date and time registers */
 961        status = time_to_menelaus(t, MENELAUS_RTC_SEC);
 962        if (status < 0)
 963                return status;
 964        status = menelaus_write_reg(MENELAUS_RTC_WKDAY, bin2bcd(t->tm_wday));
 965        if (status < 0) {
 966                dev_err(&the_menelaus->client->dev, "rtc write reg %02x "
 967                                "err %d\n", MENELAUS_RTC_WKDAY, status);
 968                return status;
 969        }
 970
 971        /* now commit the write */
 972        status = menelaus_write_reg(MENELAUS_RTC_UPDATE, RTC_UPDATE_EVERY);
 973        if (status < 0)
 974                dev_err(&the_menelaus->client->dev, "rtc commit time, err %d\n",
 975                                status);
 976
 977        return 0;
 978}
 979
 980static int menelaus_read_alarm(struct device *dev, struct rtc_wkalrm *w)
 981{
 982        struct i2c_msg  msg[2];
 983        char            regs[6];
 984        int             status;
 985
 986        /* block read alarm registers */
 987        regs[0] = MENELAUS_RTC_AL_SEC;
 988
 989        msg[0].addr = MENELAUS_I2C_ADDRESS;
 990        msg[0].flags = 0;
 991        msg[0].len = 1;
 992        msg[0].buf = regs;
 993
 994        msg[1].addr = MENELAUS_I2C_ADDRESS;
 995        msg[1].flags = I2C_M_RD;
 996        msg[1].len = sizeof(regs);
 997        msg[1].buf = regs;
 998
 999        status = i2c_transfer(the_menelaus->client->adapter, msg, 2);
1000        if (status != 2) {
1001                dev_err(dev, "%s error %d\n", "alarm read", status);
1002                return -EIO;
1003        }
1004
1005        menelaus_to_time(regs, &w->time);
1006
1007        w->enabled = !!(the_menelaus->rtc_control & RTC_CTRL_AL_EN);
1008
1009        /* NOTE we *could* check if actually pending... */
1010        w->pending = 0;
1011
1012        return 0;
1013}
1014
1015static int menelaus_set_alarm(struct device *dev, struct rtc_wkalrm *w)
1016{
1017        int             status;
1018
1019        if (the_menelaus->client->irq <= 0 && w->enabled)
1020                return -ENODEV;
1021
1022        /* clear previous alarm enable */
1023        if (the_menelaus->rtc_control & RTC_CTRL_AL_EN) {
1024                the_menelaus->rtc_control &= ~RTC_CTRL_AL_EN;
1025                status = menelaus_write_reg(MENELAUS_RTC_CTRL,
1026                                the_menelaus->rtc_control);
1027                if (status < 0)
1028                        return status;
1029        }
1030
1031        /* write alarm registers */
1032        status = time_to_menelaus(&w->time, MENELAUS_RTC_AL_SEC);
1033        if (status < 0)
1034                return status;
1035
1036        /* enable alarm if requested */
1037        if (w->enabled) {
1038                the_menelaus->rtc_control |= RTC_CTRL_AL_EN;
1039                status = menelaus_write_reg(MENELAUS_RTC_CTRL,
1040                                the_menelaus->rtc_control);
1041        }
1042
1043        return status;
1044}
1045
1046#ifdef CONFIG_RTC_INTF_DEV
1047
1048static void menelaus_rtc_update_work(struct menelaus_chip *m)
1049{
1050        /* report 1/sec update */
1051        local_irq_disable();
1052        rtc_update_irq(m->rtc, 1, RTC_IRQF | RTC_UF);
1053        local_irq_enable();
1054}
1055
1056static int menelaus_ioctl(struct device *dev, unsigned cmd, unsigned long arg)
1057{
1058        int     status;
1059
1060        if (the_menelaus->client->irq <= 0)
1061                return -ENOIOCTLCMD;
1062
1063        switch (cmd) {
1064        /* alarm IRQ */
1065        case RTC_AIE_ON:
1066                if (the_menelaus->rtc_control & RTC_CTRL_AL_EN)
1067                        return 0;
1068                the_menelaus->rtc_control |= RTC_CTRL_AL_EN;
1069                break;
1070        case RTC_AIE_OFF:
1071                if (!(the_menelaus->rtc_control & RTC_CTRL_AL_EN))
1072                        return 0;
1073                the_menelaus->rtc_control &= ~RTC_CTRL_AL_EN;
1074                break;
1075        /* 1/second "update" IRQ */
1076        case RTC_UIE_ON:
1077                if (the_menelaus->uie)
1078                        return 0;
1079                status = menelaus_remove_irq_work(MENELAUS_RTCTMR_IRQ);
1080                status = menelaus_add_irq_work(MENELAUS_RTCTMR_IRQ,
1081                                menelaus_rtc_update_work);
1082                if (status == 0)
1083                        the_menelaus->uie = 1;
1084                return status;
1085        case RTC_UIE_OFF:
1086                if (!the_menelaus->uie)
1087                        return 0;
1088                status = menelaus_remove_irq_work(MENELAUS_RTCTMR_IRQ);
1089                if (status == 0)
1090                        the_menelaus->uie = 0;
1091                return status;
1092        default:
1093                return -ENOIOCTLCMD;
1094        }
1095        return menelaus_write_reg(MENELAUS_RTC_CTRL, the_menelaus->rtc_control);
1096}
1097
1098#else
1099#define menelaus_ioctl  NULL
1100#endif
1101
1102/* REVISIT no compensation register support ... */
1103
1104static const struct rtc_class_ops menelaus_rtc_ops = {
1105        .ioctl                  = menelaus_ioctl,
1106        .read_time              = menelaus_read_time,
1107        .set_time               = menelaus_set_time,
1108        .read_alarm             = menelaus_read_alarm,
1109        .set_alarm              = menelaus_set_alarm,
1110};
1111
1112static void menelaus_rtc_alarm_work(struct menelaus_chip *m)
1113{
1114        /* report alarm */
1115        local_irq_disable();
1116        rtc_update_irq(m->rtc, 1, RTC_IRQF | RTC_AF);
1117        local_irq_enable();
1118
1119        /* then disable it; alarms are oneshot */
1120        the_menelaus->rtc_control &= ~RTC_CTRL_AL_EN;
1121        menelaus_write_reg(MENELAUS_RTC_CTRL, the_menelaus->rtc_control);
1122}
1123
1124static inline void menelaus_rtc_init(struct menelaus_chip *m)
1125{
1126        int     alarm = (m->client->irq > 0);
1127
1128        /* assume 32KDETEN pin is pulled high */
1129        if (!(menelaus_read_reg(MENELAUS_OSC_CTRL) & 0x80)) {
1130                dev_dbg(&m->client->dev, "no 32k oscillator\n");
1131                return;
1132        }
1133
1134        /* support RTC alarm; it can issue wakeups */
1135        if (alarm) {
1136                if (menelaus_add_irq_work(MENELAUS_RTCALM_IRQ,
1137                                menelaus_rtc_alarm_work) < 0) {
1138                        dev_err(&m->client->dev, "can't handle RTC alarm\n");
1139                        return;
1140                }
1141                device_init_wakeup(&m->client->dev, 1);
1142        }
1143
1144        /* be sure RTC is enabled; allow 1/sec irqs; leave 12hr mode alone */
1145        m->rtc_control = menelaus_read_reg(MENELAUS_RTC_CTRL);
1146        if (!(m->rtc_control & RTC_CTRL_RTC_EN)
1147                        || (m->rtc_control & RTC_CTRL_AL_EN)
1148                        || (m->rtc_control & RTC_CTRL_EVERY_MASK)) {
1149                if (!(m->rtc_control & RTC_CTRL_RTC_EN)) {
1150                        dev_warn(&m->client->dev, "rtc clock needs setting\n");
1151                        m->rtc_control |= RTC_CTRL_RTC_EN;
1152                }
1153                m->rtc_control &= ~RTC_CTRL_EVERY_MASK;
1154                m->rtc_control &= ~RTC_CTRL_AL_EN;
1155                menelaus_write_reg(MENELAUS_RTC_CTRL, m->rtc_control);
1156        }
1157
1158        m->rtc = rtc_device_register(DRIVER_NAME,
1159                        &m->client->dev,
1160                        &menelaus_rtc_ops, THIS_MODULE);
1161        if (IS_ERR(m->rtc)) {
1162                if (alarm) {
1163                        menelaus_remove_irq_work(MENELAUS_RTCALM_IRQ);
1164                        device_init_wakeup(&m->client->dev, 0);
1165                }
1166                dev_err(&m->client->dev, "can't register RTC: %d\n",
1167                                (int) PTR_ERR(m->rtc));
1168                the_menelaus->rtc = NULL;
1169        }
1170}
1171
1172#else
1173
1174static inline void menelaus_rtc_init(struct menelaus_chip *m)
1175{
1176        /* nothing */
1177}
1178
1179#endif
1180
1181/*-----------------------------------------------------------------------*/
1182
1183static struct i2c_driver menelaus_i2c_driver;
1184
1185static int menelaus_probe(struct i2c_client *client,
1186                          const struct i2c_device_id *id)
1187{
1188        struct menelaus_chip    *menelaus;
1189        int                     rev = 0, val;
1190        int                     err = 0;
1191        struct menelaus_platform_data *menelaus_pdata =
1192                                        dev_get_platdata(&client->dev);
1193
1194        if (the_menelaus) {
1195                dev_dbg(&client->dev, "only one %s for now\n",
1196                                DRIVER_NAME);
1197                return -ENODEV;
1198        }
1199
1200        menelaus = devm_kzalloc(&client->dev, sizeof(*menelaus), GFP_KERNEL);
1201        if (!menelaus)
1202                return -ENOMEM;
1203
1204        i2c_set_clientdata(client, menelaus);
1205
1206        the_menelaus = menelaus;
1207        menelaus->client = client;
1208
1209        /* If a true probe check the device */
1210        rev = menelaus_read_reg(MENELAUS_REV);
1211        if (rev < 0) {
1212                pr_err(DRIVER_NAME ": device not found");
1213                return -ENODEV;
1214        }
1215
1216        /* Ack and disable all Menelaus interrupts */
1217        menelaus_write_reg(MENELAUS_INT_ACK1, 0xff);
1218        menelaus_write_reg(MENELAUS_INT_ACK2, 0xff);
1219        menelaus_write_reg(MENELAUS_INT_MASK1, 0xff);
1220        menelaus_write_reg(MENELAUS_INT_MASK2, 0xff);
1221        menelaus->mask1 = 0xff;
1222        menelaus->mask2 = 0xff;
1223
1224        /* Set output buffer strengths */
1225        menelaus_write_reg(MENELAUS_MCT_CTRL1, 0x73);
1226
1227        if (client->irq > 0) {
1228                err = request_irq(client->irq, menelaus_irq, 0,
1229                                  DRIVER_NAME, menelaus);
1230                if (err) {
1231                        dev_dbg(&client->dev,  "can't get IRQ %d, err %d\n",
1232                                        client->irq, err);
1233                        return err;
1234                }
1235        }
1236
1237        mutex_init(&menelaus->lock);
1238        INIT_WORK(&menelaus->work, menelaus_work);
1239
1240        pr_info("Menelaus rev %d.%d\n", rev >> 4, rev & 0x0f);
1241
1242        val = menelaus_read_reg(MENELAUS_VCORE_CTRL1);
1243        if (val < 0)
1244                goto fail;
1245        if (val & (1 << 7))
1246                menelaus->vcore_hw_mode = 1;
1247        else
1248                menelaus->vcore_hw_mode = 0;
1249
1250        if (menelaus_pdata != NULL && menelaus_pdata->late_init != NULL) {
1251                err = menelaus_pdata->late_init(&client->dev);
1252                if (err < 0)
1253                        goto fail;
1254        }
1255
1256        menelaus_rtc_init(menelaus);
1257
1258        return 0;
1259fail:
1260        free_irq(client->irq, menelaus);
1261        flush_work(&menelaus->work);
1262        return err;
1263}
1264
1265static int __exit menelaus_remove(struct i2c_client *client)
1266{
1267        struct menelaus_chip    *menelaus = i2c_get_clientdata(client);
1268
1269        free_irq(client->irq, menelaus);
1270        flush_work(&menelaus->work);
1271        the_menelaus = NULL;
1272        return 0;
1273}
1274
1275static const struct i2c_device_id menelaus_id[] = {
1276        { "menelaus", 0 },
1277        { }
1278};
1279MODULE_DEVICE_TABLE(i2c, menelaus_id);
1280
1281static struct i2c_driver menelaus_i2c_driver = {
1282        .driver = {
1283                .name           = DRIVER_NAME,
1284        },
1285        .probe          = menelaus_probe,
1286        .remove         = __exit_p(menelaus_remove),
1287        .id_table       = menelaus_id,
1288};
1289
1290static int __init menelaus_init(void)
1291{
1292        int res;
1293
1294        res = i2c_add_driver(&menelaus_i2c_driver);
1295        if (res < 0) {
1296                pr_err(DRIVER_NAME ": driver registration failed\n");
1297                return res;
1298        }
1299
1300        return 0;
1301}
1302
1303static void __exit menelaus_exit(void)
1304{
1305        i2c_del_driver(&menelaus_i2c_driver);
1306
1307        /* FIXME: Shutdown menelaus parts that can be shut down */
1308}
1309
1310MODULE_AUTHOR("Texas Instruments, Inc. (and others)");
1311MODULE_DESCRIPTION("I2C interface for Menelaus.");
1312MODULE_LICENSE("GPL");
1313
1314module_init(menelaus_init);
1315module_exit(menelaus_exit);
1316