linux/drivers/net/ethernet/toshiba/ps3_gelic_net.c
<<
>>
Prefs
   1/*
   2 *  PS3 gelic network driver.
   3 *
   4 * Copyright (C) 2007 Sony Computer Entertainment Inc.
   5 * Copyright 2006, 2007 Sony Corporation
   6 *
   7 * This file is based on: spider_net.c
   8 *
   9 * (C) Copyright IBM Corp. 2005
  10 *
  11 * Authors : Utz Bacher <utz.bacher@de.ibm.com>
  12 *           Jens Osterkamp <Jens.Osterkamp@de.ibm.com>
  13 *
  14 * This program is free software; you can redistribute it and/or modify
  15 * it under the terms of the GNU General Public License as published by
  16 * the Free Software Foundation; either version 2, or (at your option)
  17 * any later version.
  18 *
  19 * This program is distributed in the hope that it will be useful,
  20 * but WITHOUT ANY WARRANTY; without even the implied warranty of
  21 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  22 * GNU General Public License for more details.
  23 *
  24 * You should have received a copy of the GNU General Public License
  25 * along with this program; if not, write to the Free Software
  26 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  27 */
  28
  29#undef DEBUG
  30
  31#include <linux/interrupt.h>
  32#include <linux/kernel.h>
  33#include <linux/module.h>
  34#include <linux/slab.h>
  35
  36#include <linux/etherdevice.h>
  37#include <linux/ethtool.h>
  38#include <linux/if_vlan.h>
  39
  40#include <linux/in.h>
  41#include <linux/ip.h>
  42#include <linux/tcp.h>
  43
  44#include <linux/dma-mapping.h>
  45#include <net/checksum.h>
  46#include <asm/firmware.h>
  47#include <asm/ps3.h>
  48#include <asm/lv1call.h>
  49
  50#include "ps3_gelic_net.h"
  51#include "ps3_gelic_wireless.h"
  52
  53#define DRV_NAME "Gelic Network Driver"
  54#define DRV_VERSION "2.0"
  55
  56MODULE_AUTHOR("SCE Inc.");
  57MODULE_DESCRIPTION("Gelic Network driver");
  58MODULE_LICENSE("GPL");
  59
  60
  61/* set irq_mask */
  62int gelic_card_set_irq_mask(struct gelic_card *card, u64 mask)
  63{
  64        int status;
  65
  66        status = lv1_net_set_interrupt_mask(bus_id(card), dev_id(card),
  67                                            mask, 0);
  68        if (status)
  69                dev_info(ctodev(card),
  70                         "%s failed %d\n", __func__, status);
  71        return status;
  72}
  73
  74static void gelic_card_rx_irq_on(struct gelic_card *card)
  75{
  76        card->irq_mask |= GELIC_CARD_RXINT;
  77        gelic_card_set_irq_mask(card, card->irq_mask);
  78}
  79static void gelic_card_rx_irq_off(struct gelic_card *card)
  80{
  81        card->irq_mask &= ~GELIC_CARD_RXINT;
  82        gelic_card_set_irq_mask(card, card->irq_mask);
  83}
  84
  85static void gelic_card_get_ether_port_status(struct gelic_card *card,
  86                                             int inform)
  87{
  88        u64 v2;
  89        struct net_device *ether_netdev;
  90
  91        lv1_net_control(bus_id(card), dev_id(card),
  92                        GELIC_LV1_GET_ETH_PORT_STATUS,
  93                        GELIC_LV1_VLAN_TX_ETHERNET_0, 0, 0,
  94                        &card->ether_port_status, &v2);
  95
  96        if (inform) {
  97                ether_netdev = card->netdev[GELIC_PORT_ETHERNET_0];
  98                if (card->ether_port_status & GELIC_LV1_ETHER_LINK_UP)
  99                        netif_carrier_on(ether_netdev);
 100                else
 101                        netif_carrier_off(ether_netdev);
 102        }
 103}
 104
 105static int gelic_card_set_link_mode(struct gelic_card *card, int mode)
 106{
 107        int status;
 108        u64 v1, v2;
 109
 110        status = lv1_net_control(bus_id(card), dev_id(card),
 111                                 GELIC_LV1_SET_NEGOTIATION_MODE,
 112                                 GELIC_LV1_PHY_ETHERNET_0, mode, 0, &v1, &v2);
 113        if (status) {
 114                pr_info("%s: failed setting negotiation mode %d\n", __func__,
 115                        status);
 116                return -EBUSY;
 117        }
 118
 119        card->link_mode = mode;
 120        return 0;
 121}
 122
 123/**
 124 * gelic_card_disable_txdmac - disables the transmit DMA controller
 125 * @card: card structure
 126 *
 127 * gelic_card_disable_txdmac terminates processing on the DMA controller by
 128 * turing off DMA and issuing a force end
 129 */
 130static void gelic_card_disable_txdmac(struct gelic_card *card)
 131{
 132        int status;
 133
 134        /* this hvc blocks until the DMA in progress really stopped */
 135        status = lv1_net_stop_tx_dma(bus_id(card), dev_id(card));
 136        if (status)
 137                dev_err(ctodev(card),
 138                        "lv1_net_stop_tx_dma failed, status=%d\n", status);
 139}
 140
 141/**
 142 * gelic_card_enable_rxdmac - enables the receive DMA controller
 143 * @card: card structure
 144 *
 145 * gelic_card_enable_rxdmac enables the DMA controller by setting RX_DMA_EN
 146 * in the GDADMACCNTR register
 147 */
 148static void gelic_card_enable_rxdmac(struct gelic_card *card)
 149{
 150        int status;
 151
 152#ifdef DEBUG
 153        if (gelic_descr_get_status(card->rx_chain.head) !=
 154            GELIC_DESCR_DMA_CARDOWNED) {
 155                printk(KERN_ERR "%s: status=%x\n", __func__,
 156                       be32_to_cpu(card->rx_chain.head->dmac_cmd_status));
 157                printk(KERN_ERR "%s: nextphy=%x\n", __func__,
 158                       be32_to_cpu(card->rx_chain.head->next_descr_addr));
 159                printk(KERN_ERR "%s: head=%p\n", __func__,
 160                       card->rx_chain.head);
 161        }
 162#endif
 163        status = lv1_net_start_rx_dma(bus_id(card), dev_id(card),
 164                                card->rx_chain.head->bus_addr, 0);
 165        if (status)
 166                dev_info(ctodev(card),
 167                         "lv1_net_start_rx_dma failed, status=%d\n", status);
 168}
 169
 170/**
 171 * gelic_card_disable_rxdmac - disables the receive DMA controller
 172 * @card: card structure
 173 *
 174 * gelic_card_disable_rxdmac terminates processing on the DMA controller by
 175 * turing off DMA and issuing a force end
 176 */
 177static void gelic_card_disable_rxdmac(struct gelic_card *card)
 178{
 179        int status;
 180
 181        /* this hvc blocks until the DMA in progress really stopped */
 182        status = lv1_net_stop_rx_dma(bus_id(card), dev_id(card));
 183        if (status)
 184                dev_err(ctodev(card),
 185                        "lv1_net_stop_rx_dma failed, %d\n", status);
 186}
 187
 188/**
 189 * gelic_descr_set_status -- sets the status of a descriptor
 190 * @descr: descriptor to change
 191 * @status: status to set in the descriptor
 192 *
 193 * changes the status to the specified value. Doesn't change other bits
 194 * in the status
 195 */
 196static void gelic_descr_set_status(struct gelic_descr *descr,
 197                                   enum gelic_descr_dma_status status)
 198{
 199        descr->dmac_cmd_status = cpu_to_be32(status |
 200                        (be32_to_cpu(descr->dmac_cmd_status) &
 201                         ~GELIC_DESCR_DMA_STAT_MASK));
 202        /*
 203         * dma_cmd_status field is used to indicate whether the descriptor
 204         * is valid or not.
 205         * Usually caller of this function wants to inform that to the
 206         * hardware, so we assure here the hardware sees the change.
 207         */
 208        wmb();
 209}
 210
 211/**
 212 * gelic_card_reset_chain - reset status of a descriptor chain
 213 * @card: card structure
 214 * @chain: address of chain
 215 * @start_descr: address of descriptor array
 216 *
 217 * Reset the status of dma descriptors to ready state
 218 * and re-initialize the hardware chain for later use
 219 */
 220static void gelic_card_reset_chain(struct gelic_card *card,
 221                                   struct gelic_descr_chain *chain,
 222                                   struct gelic_descr *start_descr)
 223{
 224        struct gelic_descr *descr;
 225
 226        for (descr = start_descr; start_descr != descr->next; descr++) {
 227                gelic_descr_set_status(descr, GELIC_DESCR_DMA_CARDOWNED);
 228                descr->next_descr_addr = cpu_to_be32(descr->next->bus_addr);
 229        }
 230
 231        chain->head = start_descr;
 232        chain->tail = (descr - 1);
 233
 234        (descr - 1)->next_descr_addr = 0;
 235}
 236
 237void gelic_card_up(struct gelic_card *card)
 238{
 239        pr_debug("%s: called\n", __func__);
 240        mutex_lock(&card->updown_lock);
 241        if (atomic_inc_return(&card->users) == 1) {
 242                pr_debug("%s: real do\n", __func__);
 243                /* enable irq */
 244                gelic_card_set_irq_mask(card, card->irq_mask);
 245                /* start rx */
 246                gelic_card_enable_rxdmac(card);
 247
 248                napi_enable(&card->napi);
 249        }
 250        mutex_unlock(&card->updown_lock);
 251        pr_debug("%s: done\n", __func__);
 252}
 253
 254void gelic_card_down(struct gelic_card *card)
 255{
 256        u64 mask;
 257        pr_debug("%s: called\n", __func__);
 258        mutex_lock(&card->updown_lock);
 259        if (atomic_dec_if_positive(&card->users) == 0) {
 260                pr_debug("%s: real do\n", __func__);
 261                napi_disable(&card->napi);
 262                /*
 263                 * Disable irq. Wireless interrupts will
 264                 * be disabled later if any
 265                 */
 266                mask = card->irq_mask & (GELIC_CARD_WLAN_EVENT_RECEIVED |
 267                                         GELIC_CARD_WLAN_COMMAND_COMPLETED);
 268                gelic_card_set_irq_mask(card, mask);
 269                /* stop rx */
 270                gelic_card_disable_rxdmac(card);
 271                gelic_card_reset_chain(card, &card->rx_chain,
 272                                       card->descr + GELIC_NET_TX_DESCRIPTORS);
 273                /* stop tx */
 274                gelic_card_disable_txdmac(card);
 275        }
 276        mutex_unlock(&card->updown_lock);
 277        pr_debug("%s: done\n", __func__);
 278}
 279
 280/**
 281 * gelic_descr_get_status -- returns the status of a descriptor
 282 * @descr: descriptor to look at
 283 *
 284 * returns the status as in the dmac_cmd_status field of the descriptor
 285 */
 286static enum gelic_descr_dma_status
 287gelic_descr_get_status(struct gelic_descr *descr)
 288{
 289        return be32_to_cpu(descr->dmac_cmd_status) & GELIC_DESCR_DMA_STAT_MASK;
 290}
 291
 292/**
 293 * gelic_card_free_chain - free descriptor chain
 294 * @card: card structure
 295 * @descr_in: address of desc
 296 */
 297static void gelic_card_free_chain(struct gelic_card *card,
 298                                  struct gelic_descr *descr_in)
 299{
 300        struct gelic_descr *descr;
 301
 302        for (descr = descr_in; descr && descr->bus_addr; descr = descr->next) {
 303                dma_unmap_single(ctodev(card), descr->bus_addr,
 304                                 GELIC_DESCR_SIZE, DMA_BIDIRECTIONAL);
 305                descr->bus_addr = 0;
 306        }
 307}
 308
 309/**
 310 * gelic_card_init_chain - links descriptor chain
 311 * @card: card structure
 312 * @chain: address of chain
 313 * @start_descr: address of descriptor array
 314 * @no: number of descriptors
 315 *
 316 * we manage a circular list that mirrors the hardware structure,
 317 * except that the hardware uses bus addresses.
 318 *
 319 * returns 0 on success, <0 on failure
 320 */
 321static int gelic_card_init_chain(struct gelic_card *card,
 322                                 struct gelic_descr_chain *chain,
 323                                 struct gelic_descr *start_descr, int no)
 324{
 325        int i;
 326        struct gelic_descr *descr;
 327
 328        descr = start_descr;
 329        memset(descr, 0, sizeof(*descr) * no);
 330
 331        /* set up the hardware pointers in each descriptor */
 332        for (i = 0; i < no; i++, descr++) {
 333                gelic_descr_set_status(descr, GELIC_DESCR_DMA_NOT_IN_USE);
 334                descr->bus_addr =
 335                        dma_map_single(ctodev(card), descr,
 336                                       GELIC_DESCR_SIZE,
 337                                       DMA_BIDIRECTIONAL);
 338
 339                if (!descr->bus_addr)
 340                        goto iommu_error;
 341
 342                descr->next = descr + 1;
 343                descr->prev = descr - 1;
 344        }
 345        /* make them as ring */
 346        (descr - 1)->next = start_descr;
 347        start_descr->prev = (descr - 1);
 348
 349        /* chain bus addr of hw descriptor */
 350        descr = start_descr;
 351        for (i = 0; i < no; i++, descr++) {
 352                descr->next_descr_addr = cpu_to_be32(descr->next->bus_addr);
 353        }
 354
 355        chain->head = start_descr;
 356        chain->tail = start_descr;
 357
 358        /* do not chain last hw descriptor */
 359        (descr - 1)->next_descr_addr = 0;
 360
 361        return 0;
 362
 363iommu_error:
 364        for (i--, descr--; 0 <= i; i--, descr--)
 365                if (descr->bus_addr)
 366                        dma_unmap_single(ctodev(card), descr->bus_addr,
 367                                         GELIC_DESCR_SIZE,
 368                                         DMA_BIDIRECTIONAL);
 369        return -ENOMEM;
 370}
 371
 372/**
 373 * gelic_descr_prepare_rx - reinitializes a rx descriptor
 374 * @card: card structure
 375 * @descr: descriptor to re-init
 376 *
 377 * return 0 on success, <0 on failure
 378 *
 379 * allocates a new rx skb, iommu-maps it and attaches it to the descriptor.
 380 * Activate the descriptor state-wise
 381 */
 382static int gelic_descr_prepare_rx(struct gelic_card *card,
 383                                  struct gelic_descr *descr)
 384{
 385        int offset;
 386        unsigned int bufsize;
 387
 388        if (gelic_descr_get_status(descr) !=  GELIC_DESCR_DMA_NOT_IN_USE)
 389                dev_info(ctodev(card), "%s: ERROR status\n", __func__);
 390        /* we need to round up the buffer size to a multiple of 128 */
 391        bufsize = ALIGN(GELIC_NET_MAX_MTU, GELIC_NET_RXBUF_ALIGN);
 392
 393        /* and we need to have it 128 byte aligned, therefore we allocate a
 394         * bit more */
 395        descr->skb = dev_alloc_skb(bufsize + GELIC_NET_RXBUF_ALIGN - 1);
 396        if (!descr->skb) {
 397                descr->buf_addr = 0; /* tell DMAC don't touch memory */
 398                dev_info(ctodev(card),
 399                         "%s:allocate skb failed !!\n", __func__);
 400                return -ENOMEM;
 401        }
 402        descr->buf_size = cpu_to_be32(bufsize);
 403        descr->dmac_cmd_status = 0;
 404        descr->result_size = 0;
 405        descr->valid_size = 0;
 406        descr->data_error = 0;
 407
 408        offset = ((unsigned long)descr->skb->data) &
 409                (GELIC_NET_RXBUF_ALIGN - 1);
 410        if (offset)
 411                skb_reserve(descr->skb, GELIC_NET_RXBUF_ALIGN - offset);
 412        /* io-mmu-map the skb */
 413        descr->buf_addr = cpu_to_be32(dma_map_single(ctodev(card),
 414                                                     descr->skb->data,
 415                                                     GELIC_NET_MAX_MTU,
 416                                                     DMA_FROM_DEVICE));
 417        if (!descr->buf_addr) {
 418                dev_kfree_skb_any(descr->skb);
 419                descr->skb = NULL;
 420                dev_info(ctodev(card),
 421                         "%s:Could not iommu-map rx buffer\n", __func__);
 422                gelic_descr_set_status(descr, GELIC_DESCR_DMA_NOT_IN_USE);
 423                return -ENOMEM;
 424        } else {
 425                gelic_descr_set_status(descr, GELIC_DESCR_DMA_CARDOWNED);
 426                return 0;
 427        }
 428}
 429
 430/**
 431 * gelic_card_release_rx_chain - free all skb of rx descr
 432 * @card: card structure
 433 *
 434 */
 435static void gelic_card_release_rx_chain(struct gelic_card *card)
 436{
 437        struct gelic_descr *descr = card->rx_chain.head;
 438
 439        do {
 440                if (descr->skb) {
 441                        dma_unmap_single(ctodev(card),
 442                                         be32_to_cpu(descr->buf_addr),
 443                                         descr->skb->len,
 444                                         DMA_FROM_DEVICE);
 445                        descr->buf_addr = 0;
 446                        dev_kfree_skb_any(descr->skb);
 447                        descr->skb = NULL;
 448                        gelic_descr_set_status(descr,
 449                                               GELIC_DESCR_DMA_NOT_IN_USE);
 450                }
 451                descr = descr->next;
 452        } while (descr != card->rx_chain.head);
 453}
 454
 455/**
 456 * gelic_card_fill_rx_chain - fills descriptors/skbs in the rx chains
 457 * @card: card structure
 458 *
 459 * fills all descriptors in the rx chain: allocates skbs
 460 * and iommu-maps them.
 461 * returns 0 on success, < 0 on failure
 462 */
 463static int gelic_card_fill_rx_chain(struct gelic_card *card)
 464{
 465        struct gelic_descr *descr = card->rx_chain.head;
 466        int ret;
 467
 468        do {
 469                if (!descr->skb) {
 470                        ret = gelic_descr_prepare_rx(card, descr);
 471                        if (ret)
 472                                goto rewind;
 473                }
 474                descr = descr->next;
 475        } while (descr != card->rx_chain.head);
 476
 477        return 0;
 478rewind:
 479        gelic_card_release_rx_chain(card);
 480        return ret;
 481}
 482
 483/**
 484 * gelic_card_alloc_rx_skbs - allocates rx skbs in rx descriptor chains
 485 * @card: card structure
 486 *
 487 * returns 0 on success, < 0 on failure
 488 */
 489static int gelic_card_alloc_rx_skbs(struct gelic_card *card)
 490{
 491        struct gelic_descr_chain *chain;
 492        int ret;
 493        chain = &card->rx_chain;
 494        ret = gelic_card_fill_rx_chain(card);
 495        chain->tail = card->rx_top->prev; /* point to the last */
 496        return ret;
 497}
 498
 499/**
 500 * gelic_descr_release_tx - processes a used tx descriptor
 501 * @card: card structure
 502 * @descr: descriptor to release
 503 *
 504 * releases a used tx descriptor (unmapping, freeing of skb)
 505 */
 506static void gelic_descr_release_tx(struct gelic_card *card,
 507                                       struct gelic_descr *descr)
 508{
 509        struct sk_buff *skb = descr->skb;
 510
 511        BUG_ON(!(be32_to_cpu(descr->data_status) & GELIC_DESCR_TX_TAIL));
 512
 513        dma_unmap_single(ctodev(card), be32_to_cpu(descr->buf_addr), skb->len,
 514                         DMA_TO_DEVICE);
 515        dev_kfree_skb_any(skb);
 516
 517        descr->buf_addr = 0;
 518        descr->buf_size = 0;
 519        descr->next_descr_addr = 0;
 520        descr->result_size = 0;
 521        descr->valid_size = 0;
 522        descr->data_status = 0;
 523        descr->data_error = 0;
 524        descr->skb = NULL;
 525
 526        /* set descr status */
 527        gelic_descr_set_status(descr, GELIC_DESCR_DMA_NOT_IN_USE);
 528}
 529
 530static void gelic_card_stop_queues(struct gelic_card *card)
 531{
 532        netif_stop_queue(card->netdev[GELIC_PORT_ETHERNET_0]);
 533
 534        if (card->netdev[GELIC_PORT_WIRELESS])
 535                netif_stop_queue(card->netdev[GELIC_PORT_WIRELESS]);
 536}
 537static void gelic_card_wake_queues(struct gelic_card *card)
 538{
 539        netif_wake_queue(card->netdev[GELIC_PORT_ETHERNET_0]);
 540
 541        if (card->netdev[GELIC_PORT_WIRELESS])
 542                netif_wake_queue(card->netdev[GELIC_PORT_WIRELESS]);
 543}
 544/**
 545 * gelic_card_release_tx_chain - processes sent tx descriptors
 546 * @card: adapter structure
 547 * @stop: net_stop sequence
 548 *
 549 * releases the tx descriptors that gelic has finished with
 550 */
 551static void gelic_card_release_tx_chain(struct gelic_card *card, int stop)
 552{
 553        struct gelic_descr_chain *tx_chain;
 554        enum gelic_descr_dma_status status;
 555        struct net_device *netdev;
 556        int release = 0;
 557
 558        for (tx_chain = &card->tx_chain;
 559             tx_chain->head != tx_chain->tail && tx_chain->tail;
 560             tx_chain->tail = tx_chain->tail->next) {
 561                status = gelic_descr_get_status(tx_chain->tail);
 562                netdev = tx_chain->tail->skb->dev;
 563                switch (status) {
 564                case GELIC_DESCR_DMA_RESPONSE_ERROR:
 565                case GELIC_DESCR_DMA_PROTECTION_ERROR:
 566                case GELIC_DESCR_DMA_FORCE_END:
 567                        if (printk_ratelimit())
 568                                dev_info(ctodev(card),
 569                                         "%s: forcing end of tx descriptor " \
 570                                         "with status %x\n",
 571                                         __func__, status);
 572                        netdev->stats.tx_dropped++;
 573                        break;
 574
 575                case GELIC_DESCR_DMA_COMPLETE:
 576                        if (tx_chain->tail->skb) {
 577                                netdev->stats.tx_packets++;
 578                                netdev->stats.tx_bytes +=
 579                                        tx_chain->tail->skb->len;
 580                        }
 581                        break;
 582
 583                case GELIC_DESCR_DMA_CARDOWNED:
 584                        /* pending tx request */
 585                default:
 586                        /* any other value (== GELIC_DESCR_DMA_NOT_IN_USE) */
 587                        if (!stop)
 588                                goto out;
 589                }
 590                gelic_descr_release_tx(card, tx_chain->tail);
 591                release ++;
 592        }
 593out:
 594        if (!stop && release)
 595                gelic_card_wake_queues(card);
 596}
 597
 598/**
 599 * gelic_net_set_multi - sets multicast addresses and promisc flags
 600 * @netdev: interface device structure
 601 *
 602 * gelic_net_set_multi configures multicast addresses as needed for the
 603 * netdev interface. It also sets up multicast, allmulti and promisc
 604 * flags appropriately
 605 */
 606void gelic_net_set_multi(struct net_device *netdev)
 607{
 608        struct gelic_card *card = netdev_card(netdev);
 609        struct netdev_hw_addr *ha;
 610        unsigned int i;
 611        uint8_t *p;
 612        u64 addr;
 613        int status;
 614
 615        /* clear all multicast address */
 616        status = lv1_net_remove_multicast_address(bus_id(card), dev_id(card),
 617                                                  0, 1);
 618        if (status)
 619                dev_err(ctodev(card),
 620                        "lv1_net_remove_multicast_address failed %d\n",
 621                        status);
 622        /* set broadcast address */
 623        status = lv1_net_add_multicast_address(bus_id(card), dev_id(card),
 624                                               GELIC_NET_BROADCAST_ADDR, 0);
 625        if (status)
 626                dev_err(ctodev(card),
 627                        "lv1_net_add_multicast_address failed, %d\n",
 628                        status);
 629
 630        if ((netdev->flags & IFF_ALLMULTI) ||
 631            (netdev_mc_count(netdev) > GELIC_NET_MC_COUNT_MAX)) {
 632                status = lv1_net_add_multicast_address(bus_id(card),
 633                                                       dev_id(card),
 634                                                       0, 1);
 635                if (status)
 636                        dev_err(ctodev(card),
 637                                "lv1_net_add_multicast_address failed, %d\n",
 638                                status);
 639                return;
 640        }
 641
 642        /* set multicast addresses */
 643        netdev_for_each_mc_addr(ha, netdev) {
 644                addr = 0;
 645                p = ha->addr;
 646                for (i = 0; i < ETH_ALEN; i++) {
 647                        addr <<= 8;
 648                        addr |= *p++;
 649                }
 650                status = lv1_net_add_multicast_address(bus_id(card),
 651                                                       dev_id(card),
 652                                                       addr, 0);
 653                if (status)
 654                        dev_err(ctodev(card),
 655                                "lv1_net_add_multicast_address failed, %d\n",
 656                                status);
 657        }
 658}
 659
 660/**
 661 * gelic_net_stop - called upon ifconfig down
 662 * @netdev: interface device structure
 663 *
 664 * always returns 0
 665 */
 666int gelic_net_stop(struct net_device *netdev)
 667{
 668        struct gelic_card *card;
 669
 670        pr_debug("%s: start\n", __func__);
 671
 672        netif_stop_queue(netdev);
 673        netif_carrier_off(netdev);
 674
 675        card = netdev_card(netdev);
 676        gelic_card_down(card);
 677
 678        pr_debug("%s: done\n", __func__);
 679        return 0;
 680}
 681
 682/**
 683 * gelic_card_get_next_tx_descr - returns the next available tx descriptor
 684 * @card: device structure to get descriptor from
 685 *
 686 * returns the address of the next descriptor, or NULL if not available.
 687 */
 688static struct gelic_descr *
 689gelic_card_get_next_tx_descr(struct gelic_card *card)
 690{
 691        if (!card->tx_chain.head)
 692                return NULL;
 693        /*  see if the next descriptor is free */
 694        if (card->tx_chain.tail != card->tx_chain.head->next &&
 695            gelic_descr_get_status(card->tx_chain.head) ==
 696            GELIC_DESCR_DMA_NOT_IN_USE)
 697                return card->tx_chain.head;
 698        else
 699                return NULL;
 700
 701}
 702
 703/**
 704 * gelic_net_set_txdescr_cmdstat - sets the tx descriptor command field
 705 * @descr: descriptor structure to fill out
 706 * @skb: packet to consider
 707 *
 708 * fills out the command and status field of the descriptor structure,
 709 * depending on hardware checksum settings. This function assumes a wmb()
 710 * has executed before.
 711 */
 712static void gelic_descr_set_tx_cmdstat(struct gelic_descr *descr,
 713                                       struct sk_buff *skb)
 714{
 715        if (skb->ip_summed != CHECKSUM_PARTIAL)
 716                descr->dmac_cmd_status =
 717                        cpu_to_be32(GELIC_DESCR_DMA_CMD_NO_CHKSUM |
 718                                    GELIC_DESCR_TX_DMA_FRAME_TAIL);
 719        else {
 720                /* is packet ip?
 721                 * if yes: tcp? udp? */
 722                if (skb->protocol == htons(ETH_P_IP)) {
 723                        if (ip_hdr(skb)->protocol == IPPROTO_TCP)
 724                                descr->dmac_cmd_status =
 725                                cpu_to_be32(GELIC_DESCR_DMA_CMD_TCP_CHKSUM |
 726                                            GELIC_DESCR_TX_DMA_FRAME_TAIL);
 727
 728                        else if (ip_hdr(skb)->protocol == IPPROTO_UDP)
 729                                descr->dmac_cmd_status =
 730                                cpu_to_be32(GELIC_DESCR_DMA_CMD_UDP_CHKSUM |
 731                                            GELIC_DESCR_TX_DMA_FRAME_TAIL);
 732                        else    /*
 733                                 * the stack should checksum non-tcp and non-udp
 734                                 * packets on his own: NETIF_F_IP_CSUM
 735                                 */
 736                                descr->dmac_cmd_status =
 737                                cpu_to_be32(GELIC_DESCR_DMA_CMD_NO_CHKSUM |
 738                                            GELIC_DESCR_TX_DMA_FRAME_TAIL);
 739                }
 740        }
 741}
 742
 743static struct sk_buff *gelic_put_vlan_tag(struct sk_buff *skb,
 744                                                 unsigned short tag)
 745{
 746        struct vlan_ethhdr *veth;
 747        static unsigned int c;
 748
 749        if (skb_headroom(skb) < VLAN_HLEN) {
 750                struct sk_buff *sk_tmp = skb;
 751                pr_debug("%s: hd=%d c=%ud\n", __func__, skb_headroom(skb), c);
 752                skb = skb_realloc_headroom(sk_tmp, VLAN_HLEN);
 753                if (!skb)
 754                        return NULL;
 755                dev_kfree_skb_any(sk_tmp);
 756        }
 757        veth = (struct vlan_ethhdr *)skb_push(skb, VLAN_HLEN);
 758
 759        /* Move the mac addresses to the top of buffer */
 760        memmove(skb->data, skb->data + VLAN_HLEN, 2 * ETH_ALEN);
 761
 762        veth->h_vlan_proto = cpu_to_be16(ETH_P_8021Q);
 763        veth->h_vlan_TCI = htons(tag);
 764
 765        return skb;
 766}
 767
 768/**
 769 * gelic_descr_prepare_tx - setup a descriptor for sending packets
 770 * @card: card structure
 771 * @descr: descriptor structure
 772 * @skb: packet to use
 773 *
 774 * returns 0 on success, <0 on failure.
 775 *
 776 */
 777static int gelic_descr_prepare_tx(struct gelic_card *card,
 778                                  struct gelic_descr *descr,
 779                                  struct sk_buff *skb)
 780{
 781        dma_addr_t buf;
 782
 783        if (card->vlan_required) {
 784                struct sk_buff *skb_tmp;
 785                enum gelic_port_type type;
 786
 787                type = netdev_port(skb->dev)->type;
 788                skb_tmp = gelic_put_vlan_tag(skb,
 789                                             card->vlan[type].tx);
 790                if (!skb_tmp)
 791                        return -ENOMEM;
 792                skb = skb_tmp;
 793        }
 794
 795        buf = dma_map_single(ctodev(card), skb->data, skb->len, DMA_TO_DEVICE);
 796
 797        if (!buf) {
 798                dev_err(ctodev(card),
 799                        "dma map 2 failed (%p, %i). Dropping packet\n",
 800                        skb->data, skb->len);
 801                return -ENOMEM;
 802        }
 803
 804        descr->buf_addr = cpu_to_be32(buf);
 805        descr->buf_size = cpu_to_be32(skb->len);
 806        descr->skb = skb;
 807        descr->data_status = 0;
 808        descr->next_descr_addr = 0; /* terminate hw descr */
 809        gelic_descr_set_tx_cmdstat(descr, skb);
 810
 811        /* bump free descriptor pointer */
 812        card->tx_chain.head = descr->next;
 813        return 0;
 814}
 815
 816/**
 817 * gelic_card_kick_txdma - enables TX DMA processing
 818 * @card: card structure
 819 * @descr: descriptor address to enable TX processing at
 820 *
 821 */
 822static int gelic_card_kick_txdma(struct gelic_card *card,
 823                                 struct gelic_descr *descr)
 824{
 825        int status = 0;
 826
 827        if (card->tx_dma_progress)
 828                return 0;
 829
 830        if (gelic_descr_get_status(descr) == GELIC_DESCR_DMA_CARDOWNED) {
 831                card->tx_dma_progress = 1;
 832                status = lv1_net_start_tx_dma(bus_id(card), dev_id(card),
 833                                              descr->bus_addr, 0);
 834                if (status) {
 835                        card->tx_dma_progress = 0;
 836                        dev_info(ctodev(card), "lv1_net_start_txdma failed," \
 837                                 "status=%d\n", status);
 838                }
 839        }
 840        return status;
 841}
 842
 843/**
 844 * gelic_net_xmit - transmits a frame over the device
 845 * @skb: packet to send out
 846 * @netdev: interface device structure
 847 *
 848 * returns 0 on success, <0 on failure
 849 */
 850int gelic_net_xmit(struct sk_buff *skb, struct net_device *netdev)
 851{
 852        struct gelic_card *card = netdev_card(netdev);
 853        struct gelic_descr *descr;
 854        int result;
 855        unsigned long flags;
 856
 857        spin_lock_irqsave(&card->tx_lock, flags);
 858
 859        gelic_card_release_tx_chain(card, 0);
 860
 861        descr = gelic_card_get_next_tx_descr(card);
 862        if (!descr) {
 863                /*
 864                 * no more descriptors free
 865                 */
 866                gelic_card_stop_queues(card);
 867                spin_unlock_irqrestore(&card->tx_lock, flags);
 868                return NETDEV_TX_BUSY;
 869        }
 870
 871        result = gelic_descr_prepare_tx(card, descr, skb);
 872        if (result) {
 873                /*
 874                 * DMA map failed.  As chances are that failure
 875                 * would continue, just release skb and return
 876                 */
 877                netdev->stats.tx_dropped++;
 878                dev_kfree_skb_any(skb);
 879                spin_unlock_irqrestore(&card->tx_lock, flags);
 880                return NETDEV_TX_OK;
 881        }
 882        /*
 883         * link this prepared descriptor to previous one
 884         * to achieve high performance
 885         */
 886        descr->prev->next_descr_addr = cpu_to_be32(descr->bus_addr);
 887        /*
 888         * as hardware descriptor is modified in the above lines,
 889         * ensure that the hardware sees it
 890         */
 891        wmb();
 892        if (gelic_card_kick_txdma(card, descr)) {
 893                /*
 894                 * kick failed.
 895                 * release descriptor which was just prepared
 896                 */
 897                netdev->stats.tx_dropped++;
 898                /* don't trigger BUG_ON() in gelic_descr_release_tx */
 899                descr->data_status = cpu_to_be32(GELIC_DESCR_TX_TAIL);
 900                gelic_descr_release_tx(card, descr);
 901                /* reset head */
 902                card->tx_chain.head = descr;
 903                /* reset hw termination */
 904                descr->prev->next_descr_addr = 0;
 905                dev_info(ctodev(card), "%s: kick failure\n", __func__);
 906        }
 907
 908        spin_unlock_irqrestore(&card->tx_lock, flags);
 909        return NETDEV_TX_OK;
 910}
 911
 912/**
 913 * gelic_net_pass_skb_up - takes an skb from a descriptor and passes it on
 914 * @descr: descriptor to process
 915 * @card: card structure
 916 * @netdev: net_device structure to be passed packet
 917 *
 918 * iommu-unmaps the skb, fills out skb structure and passes the data to the
 919 * stack. The descriptor state is not changed.
 920 */
 921static void gelic_net_pass_skb_up(struct gelic_descr *descr,
 922                                  struct gelic_card *card,
 923                                  struct net_device *netdev)
 924
 925{
 926        struct sk_buff *skb = descr->skb;
 927        u32 data_status, data_error;
 928
 929        data_status = be32_to_cpu(descr->data_status);
 930        data_error = be32_to_cpu(descr->data_error);
 931        /* unmap skb buffer */
 932        dma_unmap_single(ctodev(card), be32_to_cpu(descr->buf_addr),
 933                         GELIC_NET_MAX_MTU,
 934                         DMA_FROM_DEVICE);
 935
 936        skb_put(skb, be32_to_cpu(descr->valid_size)?
 937                be32_to_cpu(descr->valid_size) :
 938                be32_to_cpu(descr->result_size));
 939        if (!descr->valid_size)
 940                dev_info(ctodev(card), "buffer full %x %x %x\n",
 941                         be32_to_cpu(descr->result_size),
 942                         be32_to_cpu(descr->buf_size),
 943                         be32_to_cpu(descr->dmac_cmd_status));
 944
 945        descr->skb = NULL;
 946        /*
 947         * the card put 2 bytes vlan tag in front
 948         * of the ethernet frame
 949         */
 950        skb_pull(skb, 2);
 951        skb->protocol = eth_type_trans(skb, netdev);
 952
 953        /* checksum offload */
 954        if (netdev->features & NETIF_F_RXCSUM) {
 955                if ((data_status & GELIC_DESCR_DATA_STATUS_CHK_MASK) &&
 956                    (!(data_error & GELIC_DESCR_DATA_ERROR_CHK_MASK)))
 957                        skb->ip_summed = CHECKSUM_UNNECESSARY;
 958                else
 959                        skb_checksum_none_assert(skb);
 960        } else
 961                skb_checksum_none_assert(skb);
 962
 963        /* update netdevice statistics */
 964        netdev->stats.rx_packets++;
 965        netdev->stats.rx_bytes += skb->len;
 966
 967        /* pass skb up to stack */
 968        netif_receive_skb(skb);
 969}
 970
 971/**
 972 * gelic_card_decode_one_descr - processes an rx descriptor
 973 * @card: card structure
 974 *
 975 * returns 1 if a packet has been sent to the stack, otherwise 0
 976 *
 977 * processes an rx descriptor by iommu-unmapping the data buffer and passing
 978 * the packet up to the stack
 979 */
 980static int gelic_card_decode_one_descr(struct gelic_card *card)
 981{
 982        enum gelic_descr_dma_status status;
 983        struct gelic_descr_chain *chain = &card->rx_chain;
 984        struct gelic_descr *descr = chain->head;
 985        struct net_device *netdev = NULL;
 986        int dmac_chain_ended;
 987
 988        status = gelic_descr_get_status(descr);
 989
 990        if (status == GELIC_DESCR_DMA_CARDOWNED)
 991                return 0;
 992
 993        if (status == GELIC_DESCR_DMA_NOT_IN_USE) {
 994                dev_dbg(ctodev(card), "dormant descr? %p\n", descr);
 995                return 0;
 996        }
 997
 998        /* netdevice select */
 999        if (card->vlan_required) {
1000                unsigned int i;
1001                u16 vid;
1002                vid = *(u16 *)(descr->skb->data) & VLAN_VID_MASK;
1003                for (i = 0; i < GELIC_PORT_MAX; i++) {
1004                        if (card->vlan[i].rx == vid) {
1005                                netdev = card->netdev[i];
1006                                break;
1007                        }
1008                }
1009                if (GELIC_PORT_MAX <= i) {
1010                        pr_info("%s: unknown packet vid=%x\n", __func__, vid);
1011                        goto refill;
1012                }
1013        } else
1014                netdev = card->netdev[GELIC_PORT_ETHERNET_0];
1015
1016        if ((status == GELIC_DESCR_DMA_RESPONSE_ERROR) ||
1017            (status == GELIC_DESCR_DMA_PROTECTION_ERROR) ||
1018            (status == GELIC_DESCR_DMA_FORCE_END)) {
1019                dev_info(ctodev(card), "dropping RX descriptor with state %x\n",
1020                         status);
1021                netdev->stats.rx_dropped++;
1022                goto refill;
1023        }
1024
1025        if (status == GELIC_DESCR_DMA_BUFFER_FULL) {
1026                /*
1027                 * Buffer full would occur if and only if
1028                 * the frame length was longer than the size of this
1029                 * descriptor's buffer.  If the frame length was equal
1030                 * to or shorter than buffer'size, FRAME_END condition
1031                 * would occur.
1032                 * Anyway this frame was longer than the MTU,
1033                 * just drop it.
1034                 */
1035                dev_info(ctodev(card), "overlength frame\n");
1036                goto refill;
1037        }
1038        /*
1039         * descriptors any other than FRAME_END here should
1040         * be treated as error.
1041         */
1042        if (status != GELIC_DESCR_DMA_FRAME_END) {
1043                dev_dbg(ctodev(card), "RX descriptor with state %x\n",
1044                        status);
1045                goto refill;
1046        }
1047
1048        /* ok, we've got a packet in descr */
1049        gelic_net_pass_skb_up(descr, card, netdev);
1050refill:
1051
1052        /* is the current descriptor terminated with next_descr == NULL? */
1053        dmac_chain_ended =
1054                be32_to_cpu(descr->dmac_cmd_status) &
1055                GELIC_DESCR_RX_DMA_CHAIN_END;
1056        /*
1057         * So that always DMAC can see the end
1058         * of the descriptor chain to avoid
1059         * from unwanted DMAC overrun.
1060         */
1061        descr->next_descr_addr = 0;
1062
1063        /* change the descriptor state: */
1064        gelic_descr_set_status(descr, GELIC_DESCR_DMA_NOT_IN_USE);
1065
1066        /*
1067         * this call can fail, but for now, just leave this
1068         * decriptor without skb
1069         */
1070        gelic_descr_prepare_rx(card, descr);
1071
1072        chain->tail = descr;
1073        chain->head = descr->next;
1074
1075        /*
1076         * Set this descriptor the end of the chain.
1077         */
1078        descr->prev->next_descr_addr = cpu_to_be32(descr->bus_addr);
1079
1080        /*
1081         * If dmac chain was met, DMAC stopped.
1082         * thus re-enable it
1083         */
1084
1085        if (dmac_chain_ended)
1086                gelic_card_enable_rxdmac(card);
1087
1088        return 1;
1089}
1090
1091/**
1092 * gelic_net_poll - NAPI poll function called by the stack to return packets
1093 * @napi: napi structure
1094 * @budget: number of packets we can pass to the stack at most
1095 *
1096 * returns the number of the processed packets
1097 *
1098 */
1099static int gelic_net_poll(struct napi_struct *napi, int budget)
1100{
1101        struct gelic_card *card = container_of(napi, struct gelic_card, napi);
1102        int packets_done = 0;
1103
1104        while (packets_done < budget) {
1105                if (!gelic_card_decode_one_descr(card))
1106                        break;
1107
1108                packets_done++;
1109        }
1110
1111        if (packets_done < budget) {
1112                napi_complete(napi);
1113                gelic_card_rx_irq_on(card);
1114        }
1115        return packets_done;
1116}
1117/**
1118 * gelic_net_change_mtu - changes the MTU of an interface
1119 * @netdev: interface device structure
1120 * @new_mtu: new MTU value
1121 *
1122 * returns 0 on success, <0 on failure
1123 */
1124int gelic_net_change_mtu(struct net_device *netdev, int new_mtu)
1125{
1126        /* no need to re-alloc skbs or so -- the max mtu is about 2.3k
1127         * and mtu is outbound only anyway */
1128        if ((new_mtu < GELIC_NET_MIN_MTU) ||
1129            (new_mtu > GELIC_NET_MAX_MTU)) {
1130                return -EINVAL;
1131        }
1132        netdev->mtu = new_mtu;
1133        return 0;
1134}
1135
1136/**
1137 * gelic_card_interrupt - event handler for gelic_net
1138 */
1139static irqreturn_t gelic_card_interrupt(int irq, void *ptr)
1140{
1141        unsigned long flags;
1142        struct gelic_card *card = ptr;
1143        u64 status;
1144
1145        status = card->irq_status;
1146
1147        if (!status)
1148                return IRQ_NONE;
1149
1150        status &= card->irq_mask;
1151
1152        if (status & GELIC_CARD_RXINT) {
1153                gelic_card_rx_irq_off(card);
1154                napi_schedule(&card->napi);
1155        }
1156
1157        if (status & GELIC_CARD_TXINT) {
1158                spin_lock_irqsave(&card->tx_lock, flags);
1159                card->tx_dma_progress = 0;
1160                gelic_card_release_tx_chain(card, 0);
1161                /* kick outstanding tx descriptor if any */
1162                gelic_card_kick_txdma(card, card->tx_chain.tail);
1163                spin_unlock_irqrestore(&card->tx_lock, flags);
1164        }
1165
1166        /* ether port status changed */
1167        if (status & GELIC_CARD_PORT_STATUS_CHANGED)
1168                gelic_card_get_ether_port_status(card, 1);
1169
1170#ifdef CONFIG_GELIC_WIRELESS
1171        if (status & (GELIC_CARD_WLAN_EVENT_RECEIVED |
1172                      GELIC_CARD_WLAN_COMMAND_COMPLETED))
1173                gelic_wl_interrupt(card->netdev[GELIC_PORT_WIRELESS], status);
1174#endif
1175
1176        return IRQ_HANDLED;
1177}
1178
1179#ifdef CONFIG_NET_POLL_CONTROLLER
1180/**
1181 * gelic_net_poll_controller - artificial interrupt for netconsole etc.
1182 * @netdev: interface device structure
1183 *
1184 * see Documentation/networking/netconsole.txt
1185 */
1186void gelic_net_poll_controller(struct net_device *netdev)
1187{
1188        struct gelic_card *card = netdev_card(netdev);
1189
1190        gelic_card_set_irq_mask(card, 0);
1191        gelic_card_interrupt(netdev->irq, netdev);
1192        gelic_card_set_irq_mask(card, card->irq_mask);
1193}
1194#endif /* CONFIG_NET_POLL_CONTROLLER */
1195
1196/**
1197 * gelic_net_open - called upon ifconfig up
1198 * @netdev: interface device structure
1199 *
1200 * returns 0 on success, <0 on failure
1201 *
1202 * gelic_net_open allocates all the descriptors and memory needed for
1203 * operation, sets up multicast list and enables interrupts
1204 */
1205int gelic_net_open(struct net_device *netdev)
1206{
1207        struct gelic_card *card = netdev_card(netdev);
1208
1209        dev_dbg(ctodev(card), " -> %s %p\n", __func__, netdev);
1210
1211        gelic_card_up(card);
1212
1213        netif_start_queue(netdev);
1214        gelic_card_get_ether_port_status(card, 1);
1215
1216        dev_dbg(ctodev(card), " <- %s\n", __func__);
1217        return 0;
1218}
1219
1220void gelic_net_get_drvinfo(struct net_device *netdev,
1221                           struct ethtool_drvinfo *info)
1222{
1223        strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
1224        strlcpy(info->version, DRV_VERSION, sizeof(info->version));
1225}
1226
1227static int gelic_ether_get_settings(struct net_device *netdev,
1228                                    struct ethtool_cmd *cmd)
1229{
1230        struct gelic_card *card = netdev_card(netdev);
1231
1232        gelic_card_get_ether_port_status(card, 0);
1233
1234        if (card->ether_port_status & GELIC_LV1_ETHER_FULL_DUPLEX)
1235                cmd->duplex = DUPLEX_FULL;
1236        else
1237                cmd->duplex = DUPLEX_HALF;
1238
1239        switch (card->ether_port_status & GELIC_LV1_ETHER_SPEED_MASK) {
1240        case GELIC_LV1_ETHER_SPEED_10:
1241                ethtool_cmd_speed_set(cmd, SPEED_10);
1242                break;
1243        case GELIC_LV1_ETHER_SPEED_100:
1244                ethtool_cmd_speed_set(cmd, SPEED_100);
1245                break;
1246        case GELIC_LV1_ETHER_SPEED_1000:
1247                ethtool_cmd_speed_set(cmd, SPEED_1000);
1248                break;
1249        default:
1250                pr_info("%s: speed unknown\n", __func__);
1251                ethtool_cmd_speed_set(cmd, SPEED_10);
1252                break;
1253        }
1254
1255        cmd->supported = SUPPORTED_TP | SUPPORTED_Autoneg |
1256                        SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full |
1257                        SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full |
1258                        SUPPORTED_1000baseT_Full;
1259        cmd->advertising = cmd->supported;
1260        if (card->link_mode & GELIC_LV1_ETHER_AUTO_NEG) {
1261                cmd->autoneg = AUTONEG_ENABLE;
1262        } else {
1263                cmd->autoneg = AUTONEG_DISABLE;
1264                cmd->advertising &= ~ADVERTISED_Autoneg;
1265        }
1266        cmd->port = PORT_TP;
1267
1268        return 0;
1269}
1270
1271static int gelic_ether_set_settings(struct net_device *netdev,
1272                                    struct ethtool_cmd *cmd)
1273{
1274        struct gelic_card *card = netdev_card(netdev);
1275        u64 mode;
1276        int ret;
1277
1278        if (cmd->autoneg == AUTONEG_ENABLE) {
1279                mode = GELIC_LV1_ETHER_AUTO_NEG;
1280        } else {
1281                switch (cmd->speed) {
1282                case SPEED_10:
1283                        mode = GELIC_LV1_ETHER_SPEED_10;
1284                        break;
1285                case SPEED_100:
1286                        mode = GELIC_LV1_ETHER_SPEED_100;
1287                        break;
1288                case SPEED_1000:
1289                        mode = GELIC_LV1_ETHER_SPEED_1000;
1290                        break;
1291                default:
1292                        return -EINVAL;
1293                }
1294                if (cmd->duplex == DUPLEX_FULL)
1295                        mode |= GELIC_LV1_ETHER_FULL_DUPLEX;
1296                else if (cmd->speed == SPEED_1000) {
1297                        pr_info("1000 half duplex is not supported.\n");
1298                        return -EINVAL;
1299                }
1300        }
1301
1302        ret = gelic_card_set_link_mode(card, mode);
1303
1304        if (ret)
1305                return ret;
1306
1307        return 0;
1308}
1309
1310static void gelic_net_get_wol(struct net_device *netdev,
1311                              struct ethtool_wolinfo *wol)
1312{
1313        if (0 <= ps3_compare_firmware_version(2, 2, 0))
1314                wol->supported = WAKE_MAGIC;
1315        else
1316                wol->supported = 0;
1317
1318        wol->wolopts = ps3_sys_manager_get_wol() ? wol->supported : 0;
1319        memset(&wol->sopass, 0, sizeof(wol->sopass));
1320}
1321static int gelic_net_set_wol(struct net_device *netdev,
1322                             struct ethtool_wolinfo *wol)
1323{
1324        int status;
1325        struct gelic_card *card;
1326        u64 v1, v2;
1327
1328        if (ps3_compare_firmware_version(2, 2, 0) < 0 ||
1329            !capable(CAP_NET_ADMIN))
1330                return -EPERM;
1331
1332        if (wol->wolopts & ~WAKE_MAGIC)
1333                return -EINVAL;
1334
1335        card = netdev_card(netdev);
1336        if (wol->wolopts & WAKE_MAGIC) {
1337                status = lv1_net_control(bus_id(card), dev_id(card),
1338                                         GELIC_LV1_SET_WOL,
1339                                         GELIC_LV1_WOL_MAGIC_PACKET,
1340                                         0, GELIC_LV1_WOL_MP_ENABLE,
1341                                         &v1, &v2);
1342                if (status) {
1343                        pr_info("%s: enabling WOL failed %d\n", __func__,
1344                                status);
1345                        status = -EIO;
1346                        goto done;
1347                }
1348                status = lv1_net_control(bus_id(card), dev_id(card),
1349                                         GELIC_LV1_SET_WOL,
1350                                         GELIC_LV1_WOL_ADD_MATCH_ADDR,
1351                                         0, GELIC_LV1_WOL_MATCH_ALL,
1352                                         &v1, &v2);
1353                if (!status)
1354                        ps3_sys_manager_set_wol(1);
1355                else {
1356                        pr_info("%s: enabling WOL filter failed %d\n",
1357                                __func__, status);
1358                        status = -EIO;
1359                }
1360        } else {
1361                status = lv1_net_control(bus_id(card), dev_id(card),
1362                                         GELIC_LV1_SET_WOL,
1363                                         GELIC_LV1_WOL_MAGIC_PACKET,
1364                                         0, GELIC_LV1_WOL_MP_DISABLE,
1365                                         &v1, &v2);
1366                if (status) {
1367                        pr_info("%s: disabling WOL failed %d\n", __func__,
1368                                status);
1369                        status = -EIO;
1370                        goto done;
1371                }
1372                status = lv1_net_control(bus_id(card), dev_id(card),
1373                                         GELIC_LV1_SET_WOL,
1374                                         GELIC_LV1_WOL_DELETE_MATCH_ADDR,
1375                                         0, GELIC_LV1_WOL_MATCH_ALL,
1376                                         &v1, &v2);
1377                if (!status)
1378                        ps3_sys_manager_set_wol(0);
1379                else {
1380                        pr_info("%s: removing WOL filter failed %d\n",
1381                                __func__, status);
1382                        status = -EIO;
1383                }
1384        }
1385done:
1386        return status;
1387}
1388
1389static const struct ethtool_ops gelic_ether_ethtool_ops = {
1390        .get_drvinfo    = gelic_net_get_drvinfo,
1391        .get_settings   = gelic_ether_get_settings,
1392        .set_settings   = gelic_ether_set_settings,
1393        .get_link       = ethtool_op_get_link,
1394        .get_wol        = gelic_net_get_wol,
1395        .set_wol        = gelic_net_set_wol,
1396};
1397
1398/**
1399 * gelic_net_tx_timeout_task - task scheduled by the watchdog timeout
1400 * function (to be called not under interrupt status)
1401 * @work: work is context of tx timout task
1402 *
1403 * called as task when tx hangs, resets interface (if interface is up)
1404 */
1405static void gelic_net_tx_timeout_task(struct work_struct *work)
1406{
1407        struct gelic_card *card =
1408                container_of(work, struct gelic_card, tx_timeout_task);
1409        struct net_device *netdev = card->netdev[GELIC_PORT_ETHERNET_0];
1410
1411        dev_info(ctodev(card), "%s:Timed out. Restarting...\n", __func__);
1412
1413        if (!(netdev->flags & IFF_UP))
1414                goto out;
1415
1416        netif_device_detach(netdev);
1417        gelic_net_stop(netdev);
1418
1419        gelic_net_open(netdev);
1420        netif_device_attach(netdev);
1421
1422out:
1423        atomic_dec(&card->tx_timeout_task_counter);
1424}
1425
1426/**
1427 * gelic_net_tx_timeout - called when the tx timeout watchdog kicks in.
1428 * @netdev: interface device structure
1429 *
1430 * called, if tx hangs. Schedules a task that resets the interface
1431 */
1432void gelic_net_tx_timeout(struct net_device *netdev)
1433{
1434        struct gelic_card *card;
1435
1436        card = netdev_card(netdev);
1437        atomic_inc(&card->tx_timeout_task_counter);
1438        if (netdev->flags & IFF_UP)
1439                schedule_work(&card->tx_timeout_task);
1440        else
1441                atomic_dec(&card->tx_timeout_task_counter);
1442}
1443
1444static const struct net_device_ops gelic_netdevice_ops = {
1445        .ndo_open = gelic_net_open,
1446        .ndo_stop = gelic_net_stop,
1447        .ndo_start_xmit = gelic_net_xmit,
1448        .ndo_set_rx_mode = gelic_net_set_multi,
1449        .ndo_change_mtu = gelic_net_change_mtu,
1450        .ndo_tx_timeout = gelic_net_tx_timeout,
1451        .ndo_set_mac_address = eth_mac_addr,
1452        .ndo_validate_addr = eth_validate_addr,
1453#ifdef CONFIG_NET_POLL_CONTROLLER
1454        .ndo_poll_controller = gelic_net_poll_controller,
1455#endif
1456};
1457
1458/**
1459 * gelic_ether_setup_netdev_ops - initialization of net_device operations
1460 * @netdev: net_device structure
1461 *
1462 * fills out function pointers in the net_device structure
1463 */
1464static void gelic_ether_setup_netdev_ops(struct net_device *netdev,
1465                                         struct napi_struct *napi)
1466{
1467        netdev->watchdog_timeo = GELIC_NET_WATCHDOG_TIMEOUT;
1468        /* NAPI */
1469        netif_napi_add(netdev, napi, gelic_net_poll, NAPI_POLL_WEIGHT);
1470        netdev->ethtool_ops = &gelic_ether_ethtool_ops;
1471        netdev->netdev_ops = &gelic_netdevice_ops;
1472}
1473
1474/**
1475 * gelic_ether_setup_netdev - initialization of net_device
1476 * @netdev: net_device structure
1477 * @card: card structure
1478 *
1479 * Returns 0 on success or <0 on failure
1480 *
1481 * gelic_ether_setup_netdev initializes the net_device structure
1482 * and register it.
1483 **/
1484int gelic_net_setup_netdev(struct net_device *netdev, struct gelic_card *card)
1485{
1486        int status;
1487        u64 v1, v2;
1488
1489        netdev->hw_features = NETIF_F_IP_CSUM | NETIF_F_RXCSUM;
1490
1491        netdev->features = NETIF_F_IP_CSUM;
1492        if (GELIC_CARD_RX_CSUM_DEFAULT)
1493                netdev->features |= NETIF_F_RXCSUM;
1494
1495        status = lv1_net_control(bus_id(card), dev_id(card),
1496                                 GELIC_LV1_GET_MAC_ADDRESS,
1497                                 0, 0, 0, &v1, &v2);
1498        v1 <<= 16;
1499        if (status || !is_valid_ether_addr((u8 *)&v1)) {
1500                dev_info(ctodev(card),
1501                         "%s:lv1_net_control GET_MAC_ADDR failed %d\n",
1502                         __func__, status);
1503                return -EINVAL;
1504        }
1505        memcpy(netdev->dev_addr, &v1, ETH_ALEN);
1506
1507        if (card->vlan_required) {
1508                netdev->hard_header_len += VLAN_HLEN;
1509                /*
1510                 * As vlan is internally used,
1511                 * we can not receive vlan packets
1512                 */
1513                netdev->features |= NETIF_F_VLAN_CHALLENGED;
1514        }
1515
1516        status = register_netdev(netdev);
1517        if (status) {
1518                dev_err(ctodev(card), "%s:Couldn't register %s %d\n",
1519                        __func__, netdev->name, status);
1520                return status;
1521        }
1522        dev_info(ctodev(card), "%s: MAC addr %pM\n",
1523                 netdev->name, netdev->dev_addr);
1524
1525        return 0;
1526}
1527
1528/**
1529 * gelic_alloc_card_net - allocates net_device and card structure
1530 *
1531 * returns the card structure or NULL in case of errors
1532 *
1533 * the card and net_device structures are linked to each other
1534 */
1535#define GELIC_ALIGN (32)
1536static struct gelic_card *gelic_alloc_card_net(struct net_device **netdev)
1537{
1538        struct gelic_card *card;
1539        struct gelic_port *port;
1540        void *p;
1541        size_t alloc_size;
1542        /*
1543         * gelic requires dma descriptor is 32 bytes aligned and
1544         * the hypervisor requires irq_status is 8 bytes aligned.
1545         */
1546        BUILD_BUG_ON(offsetof(struct gelic_card, irq_status) % 8);
1547        BUILD_BUG_ON(offsetof(struct gelic_card, descr) % 32);
1548        alloc_size =
1549                sizeof(struct gelic_card) +
1550                sizeof(struct gelic_descr) * GELIC_NET_RX_DESCRIPTORS +
1551                sizeof(struct gelic_descr) * GELIC_NET_TX_DESCRIPTORS +
1552                GELIC_ALIGN - 1;
1553
1554        p  = kzalloc(alloc_size, GFP_KERNEL);
1555        if (!p)
1556                return NULL;
1557        card = PTR_ALIGN(p, GELIC_ALIGN);
1558        card->unalign = p;
1559
1560        /*
1561         * alloc netdev
1562         */
1563        *netdev = alloc_etherdev(sizeof(struct gelic_port));
1564        if (!netdev) {
1565                kfree(card->unalign);
1566                return NULL;
1567        }
1568        port = netdev_priv(*netdev);
1569
1570        /* gelic_port */
1571        port->netdev = *netdev;
1572        port->card = card;
1573        port->type = GELIC_PORT_ETHERNET_0;
1574
1575        /* gelic_card */
1576        card->netdev[GELIC_PORT_ETHERNET_0] = *netdev;
1577
1578        INIT_WORK(&card->tx_timeout_task, gelic_net_tx_timeout_task);
1579        init_waitqueue_head(&card->waitq);
1580        atomic_set(&card->tx_timeout_task_counter, 0);
1581        mutex_init(&card->updown_lock);
1582        atomic_set(&card->users, 0);
1583
1584        return card;
1585}
1586
1587static void gelic_card_get_vlan_info(struct gelic_card *card)
1588{
1589        u64 v1, v2;
1590        int status;
1591        unsigned int i;
1592        struct {
1593                int tx;
1594                int rx;
1595        } vlan_id_ix[2] = {
1596                [GELIC_PORT_ETHERNET_0] = {
1597                        .tx = GELIC_LV1_VLAN_TX_ETHERNET_0,
1598                        .rx = GELIC_LV1_VLAN_RX_ETHERNET_0
1599                },
1600                [GELIC_PORT_WIRELESS] = {
1601                        .tx = GELIC_LV1_VLAN_TX_WIRELESS,
1602                        .rx = GELIC_LV1_VLAN_RX_WIRELESS
1603                }
1604        };
1605
1606        for (i = 0; i < ARRAY_SIZE(vlan_id_ix); i++) {
1607                /* tx tag */
1608                status = lv1_net_control(bus_id(card), dev_id(card),
1609                                         GELIC_LV1_GET_VLAN_ID,
1610                                         vlan_id_ix[i].tx,
1611                                         0, 0, &v1, &v2);
1612                if (status || !v1) {
1613                        if (status != LV1_NO_ENTRY)
1614                                dev_dbg(ctodev(card),
1615                                        "get vlan id for tx(%d) failed(%d)\n",
1616                                        vlan_id_ix[i].tx, status);
1617                        card->vlan[i].tx = 0;
1618                        card->vlan[i].rx = 0;
1619                        continue;
1620                }
1621                card->vlan[i].tx = (u16)v1;
1622
1623                /* rx tag */
1624                status = lv1_net_control(bus_id(card), dev_id(card),
1625                                         GELIC_LV1_GET_VLAN_ID,
1626                                         vlan_id_ix[i].rx,
1627                                         0, 0, &v1, &v2);
1628                if (status || !v1) {
1629                        if (status != LV1_NO_ENTRY)
1630                                dev_info(ctodev(card),
1631                                         "get vlan id for rx(%d) failed(%d)\n",
1632                                         vlan_id_ix[i].rx, status);
1633                        card->vlan[i].tx = 0;
1634                        card->vlan[i].rx = 0;
1635                        continue;
1636                }
1637                card->vlan[i].rx = (u16)v1;
1638
1639                dev_dbg(ctodev(card), "vlan_id[%d] tx=%02x rx=%02x\n",
1640                        i, card->vlan[i].tx, card->vlan[i].rx);
1641        }
1642
1643        if (card->vlan[GELIC_PORT_ETHERNET_0].tx) {
1644                BUG_ON(!card->vlan[GELIC_PORT_WIRELESS].tx);
1645                card->vlan_required = 1;
1646        } else
1647                card->vlan_required = 0;
1648
1649        /* check wirelss capable firmware */
1650        if (ps3_compare_firmware_version(1, 6, 0) < 0) {
1651                card->vlan[GELIC_PORT_WIRELESS].tx = 0;
1652                card->vlan[GELIC_PORT_WIRELESS].rx = 0;
1653        }
1654
1655        dev_info(ctodev(card), "internal vlan %s\n",
1656                 card->vlan_required? "enabled" : "disabled");
1657}
1658/**
1659 * ps3_gelic_driver_probe - add a device to the control of this driver
1660 */
1661static int ps3_gelic_driver_probe(struct ps3_system_bus_device *dev)
1662{
1663        struct gelic_card *card;
1664        struct net_device *netdev;
1665        int result;
1666
1667        pr_debug("%s: called\n", __func__);
1668
1669        udbg_shutdown_ps3gelic();
1670
1671        result = ps3_open_hv_device(dev);
1672
1673        if (result) {
1674                dev_dbg(&dev->core, "%s:ps3_open_hv_device failed\n",
1675                        __func__);
1676                goto fail_open;
1677        }
1678
1679        result = ps3_dma_region_create(dev->d_region);
1680
1681        if (result) {
1682                dev_dbg(&dev->core, "%s:ps3_dma_region_create failed(%d)\n",
1683                        __func__, result);
1684                BUG_ON("check region type");
1685                goto fail_dma_region;
1686        }
1687
1688        /* alloc card/netdevice */
1689        card = gelic_alloc_card_net(&netdev);
1690        if (!card) {
1691                dev_info(&dev->core, "%s:gelic_net_alloc_card failed\n",
1692                         __func__);
1693                result = -ENOMEM;
1694                goto fail_alloc_card;
1695        }
1696        ps3_system_bus_set_drvdata(dev, card);
1697        card->dev = dev;
1698
1699        /* get internal vlan info */
1700        gelic_card_get_vlan_info(card);
1701
1702        card->link_mode = GELIC_LV1_ETHER_AUTO_NEG;
1703
1704        /* setup interrupt */
1705        result = lv1_net_set_interrupt_status_indicator(bus_id(card),
1706                                                        dev_id(card),
1707                ps3_mm_phys_to_lpar(__pa(&card->irq_status)),
1708                0);
1709
1710        if (result) {
1711                dev_dbg(&dev->core,
1712                        "%s:set_interrupt_status_indicator failed: %s\n",
1713                        __func__, ps3_result(result));
1714                result = -EIO;
1715                goto fail_status_indicator;
1716        }
1717
1718        result = ps3_sb_event_receive_port_setup(dev, PS3_BINDING_CPU_ANY,
1719                &card->irq);
1720
1721        if (result) {
1722                dev_info(ctodev(card),
1723                         "%s:gelic_net_open_device failed (%d)\n",
1724                         __func__, result);
1725                result = -EPERM;
1726                goto fail_alloc_irq;
1727        }
1728        result = request_irq(card->irq, gelic_card_interrupt,
1729                             0, netdev->name, card);
1730
1731        if (result) {
1732                dev_info(ctodev(card), "%s:request_irq failed (%d)\n",
1733                        __func__, result);
1734                goto fail_request_irq;
1735        }
1736
1737        /* setup card structure */
1738        card->irq_mask = GELIC_CARD_RXINT | GELIC_CARD_TXINT |
1739                GELIC_CARD_PORT_STATUS_CHANGED;
1740
1741
1742        if (gelic_card_init_chain(card, &card->tx_chain,
1743                        card->descr, GELIC_NET_TX_DESCRIPTORS))
1744                goto fail_alloc_tx;
1745        if (gelic_card_init_chain(card, &card->rx_chain,
1746                                 card->descr + GELIC_NET_TX_DESCRIPTORS,
1747                                 GELIC_NET_RX_DESCRIPTORS))
1748                goto fail_alloc_rx;
1749
1750        /* head of chain */
1751        card->tx_top = card->tx_chain.head;
1752        card->rx_top = card->rx_chain.head;
1753        dev_dbg(ctodev(card), "descr rx %p, tx %p, size %#lx, num %#x\n",
1754                card->rx_top, card->tx_top, sizeof(struct gelic_descr),
1755                GELIC_NET_RX_DESCRIPTORS);
1756        /* allocate rx skbs */
1757        if (gelic_card_alloc_rx_skbs(card))
1758                goto fail_alloc_skbs;
1759
1760        spin_lock_init(&card->tx_lock);
1761        card->tx_dma_progress = 0;
1762
1763        /* setup net_device structure */
1764        netdev->irq = card->irq;
1765        SET_NETDEV_DEV(netdev, &card->dev->core);
1766        gelic_ether_setup_netdev_ops(netdev, &card->napi);
1767        result = gelic_net_setup_netdev(netdev, card);
1768        if (result) {
1769                dev_dbg(&dev->core, "%s: setup_netdev failed %d",
1770                        __func__, result);
1771                goto fail_setup_netdev;
1772        }
1773
1774#ifdef CONFIG_GELIC_WIRELESS
1775        if (gelic_wl_driver_probe(card)) {
1776                dev_dbg(&dev->core, "%s: WL init failed\n", __func__);
1777                goto fail_setup_netdev;
1778        }
1779#endif
1780        pr_debug("%s: done\n", __func__);
1781        return 0;
1782
1783fail_setup_netdev:
1784fail_alloc_skbs:
1785        gelic_card_free_chain(card, card->rx_chain.head);
1786fail_alloc_rx:
1787        gelic_card_free_chain(card, card->tx_chain.head);
1788fail_alloc_tx:
1789        free_irq(card->irq, card);
1790        netdev->irq = NO_IRQ;
1791fail_request_irq:
1792        ps3_sb_event_receive_port_destroy(dev, card->irq);
1793fail_alloc_irq:
1794        lv1_net_set_interrupt_status_indicator(bus_id(card),
1795                                               bus_id(card),
1796                                               0, 0);
1797fail_status_indicator:
1798        ps3_system_bus_set_drvdata(dev, NULL);
1799        kfree(netdev_card(netdev)->unalign);
1800        free_netdev(netdev);
1801fail_alloc_card:
1802        ps3_dma_region_free(dev->d_region);
1803fail_dma_region:
1804        ps3_close_hv_device(dev);
1805fail_open:
1806        return result;
1807}
1808
1809/**
1810 * ps3_gelic_driver_remove - remove a device from the control of this driver
1811 */
1812
1813static int ps3_gelic_driver_remove(struct ps3_system_bus_device *dev)
1814{
1815        struct gelic_card *card = ps3_system_bus_get_drvdata(dev);
1816        struct net_device *netdev0;
1817        pr_debug("%s: called\n", __func__);
1818
1819        /* set auto-negotiation */
1820        gelic_card_set_link_mode(card, GELIC_LV1_ETHER_AUTO_NEG);
1821
1822#ifdef CONFIG_GELIC_WIRELESS
1823        gelic_wl_driver_remove(card);
1824#endif
1825        /* stop interrupt */
1826        gelic_card_set_irq_mask(card, 0);
1827
1828        /* turn off DMA, force end */
1829        gelic_card_disable_rxdmac(card);
1830        gelic_card_disable_txdmac(card);
1831
1832        /* release chains */
1833        gelic_card_release_tx_chain(card, 1);
1834        gelic_card_release_rx_chain(card);
1835
1836        gelic_card_free_chain(card, card->tx_top);
1837        gelic_card_free_chain(card, card->rx_top);
1838
1839        netdev0 = card->netdev[GELIC_PORT_ETHERNET_0];
1840        /* disconnect event port */
1841        free_irq(card->irq, card);
1842        netdev0->irq = NO_IRQ;
1843        ps3_sb_event_receive_port_destroy(card->dev, card->irq);
1844
1845        wait_event(card->waitq,
1846                   atomic_read(&card->tx_timeout_task_counter) == 0);
1847
1848        lv1_net_set_interrupt_status_indicator(bus_id(card), dev_id(card),
1849                                               0 , 0);
1850
1851        unregister_netdev(netdev0);
1852        kfree(netdev_card(netdev0)->unalign);
1853        free_netdev(netdev0);
1854
1855        ps3_system_bus_set_drvdata(dev, NULL);
1856
1857        ps3_dma_region_free(dev->d_region);
1858
1859        ps3_close_hv_device(dev);
1860
1861        pr_debug("%s: done\n", __func__);
1862        return 0;
1863}
1864
1865static struct ps3_system_bus_driver ps3_gelic_driver = {
1866        .match_id = PS3_MATCH_ID_GELIC,
1867        .probe = ps3_gelic_driver_probe,
1868        .remove = ps3_gelic_driver_remove,
1869        .shutdown = ps3_gelic_driver_remove,
1870        .core.name = "ps3_gelic_driver",
1871        .core.owner = THIS_MODULE,
1872};
1873
1874static int __init ps3_gelic_driver_init (void)
1875{
1876        return firmware_has_feature(FW_FEATURE_PS3_LV1)
1877                ? ps3_system_bus_driver_register(&ps3_gelic_driver)
1878                : -ENODEV;
1879}
1880
1881static void __exit ps3_gelic_driver_exit (void)
1882{
1883        ps3_system_bus_driver_unregister(&ps3_gelic_driver);
1884}
1885
1886module_init(ps3_gelic_driver_init);
1887module_exit(ps3_gelic_driver_exit);
1888
1889MODULE_ALIAS(PS3_MODULE_ALIAS_GELIC);
1890
1891