linux/drivers/net/wireless/mwifiex/sta_ioctl.c
<<
>>
Prefs
   1/*
   2 * Marvell Wireless LAN device driver: functions for station ioctl
   3 *
   4 * Copyright (C) 2011, Marvell International Ltd.
   5 *
   6 * This software file (the "File") is distributed by Marvell International
   7 * Ltd. under the terms of the GNU General Public License Version 2, June 1991
   8 * (the "License").  You may use, redistribute and/or modify this File in
   9 * accordance with the terms and conditions of the License, a copy of which
  10 * is available by writing to the Free Software Foundation, Inc.,
  11 * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
  12 * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
  13 *
  14 * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
  15 * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
  16 * ARE EXPRESSLY DISCLAIMED.  The License provides additional details about
  17 * this warranty disclaimer.
  18 */
  19
  20#include "decl.h"
  21#include "ioctl.h"
  22#include "util.h"
  23#include "fw.h"
  24#include "main.h"
  25#include "wmm.h"
  26#include "11n.h"
  27#include "cfg80211.h"
  28
  29static int disconnect_on_suspend = 1;
  30module_param(disconnect_on_suspend, int, 0644);
  31
  32/*
  33 * Copies the multicast address list from device to driver.
  34 *
  35 * This function does not validate the destination memory for
  36 * size, and the calling function must ensure enough memory is
  37 * available.
  38 */
  39int mwifiex_copy_mcast_addr(struct mwifiex_multicast_list *mlist,
  40                            struct net_device *dev)
  41{
  42        int i = 0;
  43        struct netdev_hw_addr *ha;
  44
  45        netdev_for_each_mc_addr(ha, dev)
  46                memcpy(&mlist->mac_list[i++], ha->addr, ETH_ALEN);
  47
  48        return i;
  49}
  50
  51/*
  52 * Wait queue completion handler.
  53 *
  54 * This function waits on a cmd wait queue. It also cancels the pending
  55 * request after waking up, in case of errors.
  56 */
  57int mwifiex_wait_queue_complete(struct mwifiex_adapter *adapter,
  58                                struct cmd_ctrl_node *cmd_queued)
  59{
  60        int status;
  61
  62        /* Wait for completion */
  63        status = wait_event_interruptible(adapter->cmd_wait_q.wait,
  64                                          *(cmd_queued->condition));
  65        if (status) {
  66                dev_err(adapter->dev, "cmd_wait_q terminated: %d\n", status);
  67                return status;
  68        }
  69
  70        status = adapter->cmd_wait_q.status;
  71        adapter->cmd_wait_q.status = 0;
  72
  73        return status;
  74}
  75
  76/*
  77 * This function prepares the correct firmware command and
  78 * issues it to set the multicast list.
  79 *
  80 * This function can be used to enable promiscuous mode, or enable all
  81 * multicast packets, or to enable selective multicast.
  82 */
  83int mwifiex_request_set_multicast_list(struct mwifiex_private *priv,
  84                                struct mwifiex_multicast_list *mcast_list)
  85{
  86        int ret = 0;
  87        u16 old_pkt_filter;
  88
  89        old_pkt_filter = priv->curr_pkt_filter;
  90
  91        if (mcast_list->mode == MWIFIEX_PROMISC_MODE) {
  92                dev_dbg(priv->adapter->dev, "info: Enable Promiscuous mode\n");
  93                priv->curr_pkt_filter |= HostCmd_ACT_MAC_PROMISCUOUS_ENABLE;
  94                priv->curr_pkt_filter &=
  95                        ~HostCmd_ACT_MAC_ALL_MULTICAST_ENABLE;
  96        } else {
  97                /* Multicast */
  98                priv->curr_pkt_filter &= ~HostCmd_ACT_MAC_PROMISCUOUS_ENABLE;
  99                if (mcast_list->mode == MWIFIEX_ALL_MULTI_MODE) {
 100                        dev_dbg(priv->adapter->dev,
 101                                "info: Enabling All Multicast!\n");
 102                        priv->curr_pkt_filter |=
 103                                HostCmd_ACT_MAC_ALL_MULTICAST_ENABLE;
 104                } else {
 105                        priv->curr_pkt_filter &=
 106                                ~HostCmd_ACT_MAC_ALL_MULTICAST_ENABLE;
 107                        dev_dbg(priv->adapter->dev,
 108                                "info: Set multicast list=%d\n",
 109                                mcast_list->num_multicast_addr);
 110                        /* Send multicast addresses to firmware */
 111                        ret = mwifiex_send_cmd_async(priv,
 112                                HostCmd_CMD_MAC_MULTICAST_ADR,
 113                                HostCmd_ACT_GEN_SET, 0,
 114                                mcast_list);
 115                }
 116        }
 117        dev_dbg(priv->adapter->dev,
 118                "info: old_pkt_filter=%#x, curr_pkt_filter=%#x\n",
 119               old_pkt_filter, priv->curr_pkt_filter);
 120        if (old_pkt_filter != priv->curr_pkt_filter) {
 121                ret = mwifiex_send_cmd_async(priv, HostCmd_CMD_MAC_CONTROL,
 122                                             HostCmd_ACT_GEN_SET,
 123                                             0, &priv->curr_pkt_filter);
 124        }
 125
 126        return ret;
 127}
 128
 129/*
 130 * This function fills bss descriptor structure using provided
 131 * information.
 132 * beacon_ie buffer is allocated in this function. It is caller's
 133 * responsibility to free the memory.
 134 */
 135int mwifiex_fill_new_bss_desc(struct mwifiex_private *priv,
 136                              struct cfg80211_bss *bss,
 137                              struct mwifiex_bssdescriptor *bss_desc)
 138{
 139        u8 *beacon_ie;
 140        size_t beacon_ie_len;
 141        struct mwifiex_bss_priv *bss_priv = (void *)bss->priv;
 142        const struct cfg80211_bss_ies *ies;
 143
 144        rcu_read_lock();
 145        ies = rcu_dereference(bss->ies);
 146        beacon_ie = kmemdup(ies->data, ies->len, GFP_ATOMIC);
 147        beacon_ie_len = ies->len;
 148        bss_desc->timestamp = ies->tsf;
 149        rcu_read_unlock();
 150
 151        if (!beacon_ie) {
 152                dev_err(priv->adapter->dev, " failed to alloc beacon_ie\n");
 153                return -ENOMEM;
 154        }
 155
 156        memcpy(bss_desc->mac_address, bss->bssid, ETH_ALEN);
 157        bss_desc->rssi = bss->signal;
 158        /* The caller of this function will free beacon_ie */
 159        bss_desc->beacon_buf = beacon_ie;
 160        bss_desc->beacon_buf_size = beacon_ie_len;
 161        bss_desc->beacon_period = bss->beacon_interval;
 162        bss_desc->cap_info_bitmap = bss->capability;
 163        bss_desc->bss_band = bss_priv->band;
 164        bss_desc->fw_tsf = bss_priv->fw_tsf;
 165        if (bss_desc->cap_info_bitmap & WLAN_CAPABILITY_PRIVACY) {
 166                dev_dbg(priv->adapter->dev, "info: InterpretIE: AP WEP enabled\n");
 167                bss_desc->privacy = MWIFIEX_802_11_PRIV_FILTER_8021X_WEP;
 168        } else {
 169                bss_desc->privacy = MWIFIEX_802_11_PRIV_FILTER_ACCEPT_ALL;
 170        }
 171        if (bss_desc->cap_info_bitmap & WLAN_CAPABILITY_IBSS)
 172                bss_desc->bss_mode = NL80211_IFTYPE_ADHOC;
 173        else
 174                bss_desc->bss_mode = NL80211_IFTYPE_STATION;
 175
 176        /* Disable 11ac by default. Enable it only where there
 177         * exist VHT_CAP IE in AP beacon
 178         */
 179        bss_desc->disable_11ac = true;
 180
 181        if (bss_desc->cap_info_bitmap & WLAN_CAPABILITY_SPECTRUM_MGMT)
 182                bss_desc->sensed_11h = true;
 183
 184        return mwifiex_update_bss_desc_with_ie(priv->adapter, bss_desc);
 185}
 186
 187static int mwifiex_process_country_ie(struct mwifiex_private *priv,
 188                                      struct cfg80211_bss *bss)
 189{
 190        const u8 *country_ie;
 191        u8 country_ie_len;
 192        struct mwifiex_802_11d_domain_reg *domain_info =
 193                                        &priv->adapter->domain_reg;
 194
 195        rcu_read_lock();
 196        country_ie = ieee80211_bss_get_ie(bss, WLAN_EID_COUNTRY);
 197        if (!country_ie) {
 198                rcu_read_unlock();
 199                return 0;
 200        }
 201
 202        country_ie_len = country_ie[1];
 203        if (country_ie_len < IEEE80211_COUNTRY_IE_MIN_LEN) {
 204                rcu_read_unlock();
 205                return 0;
 206        }
 207
 208        domain_info->country_code[0] = country_ie[2];
 209        domain_info->country_code[1] = country_ie[3];
 210        domain_info->country_code[2] = ' ';
 211
 212        country_ie_len -= IEEE80211_COUNTRY_STRING_LEN;
 213
 214        domain_info->no_of_triplet =
 215                country_ie_len / sizeof(struct ieee80211_country_ie_triplet);
 216
 217        memcpy((u8 *)domain_info->triplet,
 218               &country_ie[2] + IEEE80211_COUNTRY_STRING_LEN, country_ie_len);
 219
 220        rcu_read_unlock();
 221
 222        if (mwifiex_send_cmd_async(priv, HostCmd_CMD_802_11D_DOMAIN_INFO,
 223                                   HostCmd_ACT_GEN_SET, 0, NULL)) {
 224                wiphy_err(priv->adapter->wiphy,
 225                          "11D: setting domain info in FW\n");
 226                return -1;
 227        }
 228
 229        return 0;
 230}
 231
 232/*
 233 * In Ad-Hoc mode, the IBSS is created if not found in scan list.
 234 * In both Ad-Hoc and infra mode, an deauthentication is performed
 235 * first.
 236 */
 237int mwifiex_bss_start(struct mwifiex_private *priv, struct cfg80211_bss *bss,
 238                      struct cfg80211_ssid *req_ssid)
 239{
 240        int ret;
 241        struct mwifiex_adapter *adapter = priv->adapter;
 242        struct mwifiex_bssdescriptor *bss_desc = NULL;
 243
 244        priv->scan_block = false;
 245
 246        if (bss) {
 247                mwifiex_process_country_ie(priv, bss);
 248
 249                /* Allocate and fill new bss descriptor */
 250                bss_desc = kzalloc(sizeof(struct mwifiex_bssdescriptor),
 251                                   GFP_KERNEL);
 252                if (!bss_desc)
 253                        return -ENOMEM;
 254
 255                ret = mwifiex_fill_new_bss_desc(priv, bss, bss_desc);
 256                if (ret)
 257                        goto done;
 258        }
 259
 260        if (priv->bss_mode == NL80211_IFTYPE_STATION ||
 261            priv->bss_mode == NL80211_IFTYPE_P2P_CLIENT) {
 262                u8 config_bands;
 263
 264                ret = mwifiex_deauthenticate(priv, NULL);
 265                if (ret)
 266                        goto done;
 267
 268                if (!bss_desc)
 269                        return -1;
 270
 271                if (mwifiex_band_to_radio_type(bss_desc->bss_band) ==
 272                                                HostCmd_SCAN_RADIO_TYPE_BG)
 273                        config_bands = BAND_B | BAND_G | BAND_GN | BAND_GAC;
 274                else
 275                        config_bands = BAND_A | BAND_AN | BAND_AAC;
 276
 277                if (!((config_bands | adapter->fw_bands) & ~adapter->fw_bands))
 278                        adapter->config_bands = config_bands;
 279
 280                ret = mwifiex_check_network_compatibility(priv, bss_desc);
 281                if (ret)
 282                        goto done;
 283
 284                if (mwifiex_11h_get_csa_closed_channel(priv) ==
 285                                                        (u8)bss_desc->channel) {
 286                        dev_err(adapter->dev,
 287                                "Attempt to reconnect on csa closed chan(%d)\n",
 288                                bss_desc->channel);
 289                        goto done;
 290                }
 291
 292                dev_dbg(adapter->dev, "info: SSID found in scan list ... "
 293                                      "associating...\n");
 294
 295                mwifiex_stop_net_dev_queue(priv->netdev, adapter);
 296                if (netif_carrier_ok(priv->netdev))
 297                        netif_carrier_off(priv->netdev);
 298
 299                /* Clear any past association response stored for
 300                 * application retrieval */
 301                priv->assoc_rsp_size = 0;
 302                ret = mwifiex_associate(priv, bss_desc);
 303
 304                /* If auth type is auto and association fails using open mode,
 305                 * try to connect using shared mode */
 306                if (ret == WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG &&
 307                    priv->sec_info.is_authtype_auto &&
 308                    priv->sec_info.wep_enabled) {
 309                        priv->sec_info.authentication_mode =
 310                                                NL80211_AUTHTYPE_SHARED_KEY;
 311                        ret = mwifiex_associate(priv, bss_desc);
 312                }
 313
 314                if (bss)
 315                        cfg80211_put_bss(priv->adapter->wiphy, bss);
 316        } else {
 317                /* Adhoc mode */
 318                /* If the requested SSID matches current SSID, return */
 319                if (bss_desc && bss_desc->ssid.ssid_len &&
 320                    (!mwifiex_ssid_cmp(&priv->curr_bss_params.bss_descriptor.
 321                                       ssid, &bss_desc->ssid))) {
 322                        kfree(bss_desc);
 323                        return 0;
 324                }
 325
 326                /* Exit Adhoc mode first */
 327                dev_dbg(adapter->dev, "info: Sending Adhoc Stop\n");
 328                ret = mwifiex_deauthenticate(priv, NULL);
 329                if (ret)
 330                        goto done;
 331
 332                priv->adhoc_is_link_sensed = false;
 333
 334                ret = mwifiex_check_network_compatibility(priv, bss_desc);
 335
 336                mwifiex_stop_net_dev_queue(priv->netdev, adapter);
 337                if (netif_carrier_ok(priv->netdev))
 338                        netif_carrier_off(priv->netdev);
 339
 340                if (!ret) {
 341                        dev_dbg(adapter->dev, "info: network found in scan"
 342                                                        " list. Joining...\n");
 343                        ret = mwifiex_adhoc_join(priv, bss_desc);
 344                        if (bss)
 345                                cfg80211_put_bss(priv->adapter->wiphy, bss);
 346                } else {
 347                        dev_dbg(adapter->dev, "info: Network not found in "
 348                                "the list, creating adhoc with ssid = %s\n",
 349                                req_ssid->ssid);
 350                        ret = mwifiex_adhoc_start(priv, req_ssid);
 351                }
 352        }
 353
 354done:
 355        /* beacon_ie buffer was allocated in function
 356         * mwifiex_fill_new_bss_desc(). Free it now.
 357         */
 358        if (bss_desc)
 359                kfree(bss_desc->beacon_buf);
 360        kfree(bss_desc);
 361        return ret;
 362}
 363
 364/*
 365 * IOCTL request handler to set host sleep configuration.
 366 *
 367 * This function prepares the correct firmware command and
 368 * issues it.
 369 */
 370static int mwifiex_set_hs_params(struct mwifiex_private *priv, u16 action,
 371                                 int cmd_type, struct mwifiex_ds_hs_cfg *hs_cfg)
 372
 373{
 374        struct mwifiex_adapter *adapter = priv->adapter;
 375        int status = 0;
 376        u32 prev_cond = 0;
 377
 378        if (!hs_cfg)
 379                return -ENOMEM;
 380
 381        switch (action) {
 382        case HostCmd_ACT_GEN_SET:
 383                if (adapter->pps_uapsd_mode) {
 384                        dev_dbg(adapter->dev, "info: Host Sleep IOCTL"
 385                                " is blocked in UAPSD/PPS mode\n");
 386                        status = -1;
 387                        break;
 388                }
 389                if (hs_cfg->is_invoke_hostcmd) {
 390                        if (hs_cfg->conditions == HS_CFG_CANCEL) {
 391                                if (!adapter->is_hs_configured)
 392                                        /* Already cancelled */
 393                                        break;
 394                                /* Save previous condition */
 395                                prev_cond = le32_to_cpu(adapter->hs_cfg
 396                                                        .conditions);
 397                                adapter->hs_cfg.conditions =
 398                                                cpu_to_le32(hs_cfg->conditions);
 399                        } else if (hs_cfg->conditions) {
 400                                adapter->hs_cfg.conditions =
 401                                                cpu_to_le32(hs_cfg->conditions);
 402                                adapter->hs_cfg.gpio = (u8)hs_cfg->gpio;
 403                                if (hs_cfg->gap)
 404                                        adapter->hs_cfg.gap = (u8)hs_cfg->gap;
 405                        } else if (adapter->hs_cfg.conditions ==
 406                                   cpu_to_le32(HS_CFG_CANCEL)) {
 407                                /* Return failure if no parameters for HS
 408                                   enable */
 409                                status = -1;
 410                                break;
 411                        }
 412                        if (cmd_type == MWIFIEX_SYNC_CMD)
 413                                status = mwifiex_send_cmd_sync(priv,
 414                                                HostCmd_CMD_802_11_HS_CFG_ENH,
 415                                                HostCmd_ACT_GEN_SET, 0,
 416                                                &adapter->hs_cfg);
 417                        else
 418                                status = mwifiex_send_cmd_async(priv,
 419                                                HostCmd_CMD_802_11_HS_CFG_ENH,
 420                                                HostCmd_ACT_GEN_SET, 0,
 421                                                &adapter->hs_cfg);
 422                        if (hs_cfg->conditions == HS_CFG_CANCEL)
 423                                /* Restore previous condition */
 424                                adapter->hs_cfg.conditions =
 425                                                cpu_to_le32(prev_cond);
 426                } else {
 427                        adapter->hs_cfg.conditions =
 428                                                cpu_to_le32(hs_cfg->conditions);
 429                        adapter->hs_cfg.gpio = (u8)hs_cfg->gpio;
 430                        adapter->hs_cfg.gap = (u8)hs_cfg->gap;
 431                }
 432                break;
 433        case HostCmd_ACT_GEN_GET:
 434                hs_cfg->conditions = le32_to_cpu(adapter->hs_cfg.conditions);
 435                hs_cfg->gpio = adapter->hs_cfg.gpio;
 436                hs_cfg->gap = adapter->hs_cfg.gap;
 437                break;
 438        default:
 439                status = -1;
 440                break;
 441        }
 442
 443        return status;
 444}
 445
 446/*
 447 * Sends IOCTL request to cancel the existing Host Sleep configuration.
 448 *
 449 * This function allocates the IOCTL request buffer, fills it
 450 * with requisite parameters and calls the IOCTL handler.
 451 */
 452int mwifiex_cancel_hs(struct mwifiex_private *priv, int cmd_type)
 453{
 454        struct mwifiex_ds_hs_cfg hscfg;
 455
 456        hscfg.conditions = HS_CFG_CANCEL;
 457        hscfg.is_invoke_hostcmd = true;
 458
 459        return mwifiex_set_hs_params(priv, HostCmd_ACT_GEN_SET,
 460                                    cmd_type, &hscfg);
 461}
 462EXPORT_SYMBOL_GPL(mwifiex_cancel_hs);
 463
 464/*
 465 * Sends IOCTL request to cancel the existing Host Sleep configuration.
 466 *
 467 * This function allocates the IOCTL request buffer, fills it
 468 * with requisite parameters and calls the IOCTL handler.
 469 */
 470int mwifiex_enable_hs(struct mwifiex_adapter *adapter)
 471{
 472        struct mwifiex_ds_hs_cfg hscfg;
 473        struct mwifiex_private *priv;
 474        int i;
 475
 476        if (disconnect_on_suspend) {
 477                for (i = 0; i < adapter->priv_num; i++) {
 478                        priv = adapter->priv[i];
 479                        if (priv)
 480                                mwifiex_deauthenticate(priv, NULL);
 481                }
 482        }
 483
 484        if (adapter->hs_activated) {
 485                dev_dbg(adapter->dev, "cmd: HS Already activated\n");
 486                return true;
 487        }
 488
 489        adapter->hs_activate_wait_q_woken = false;
 490
 491        memset(&hscfg, 0, sizeof(struct mwifiex_ds_hs_cfg));
 492        hscfg.is_invoke_hostcmd = true;
 493
 494        if (mwifiex_set_hs_params(mwifiex_get_priv(adapter,
 495                                                   MWIFIEX_BSS_ROLE_STA),
 496                                  HostCmd_ACT_GEN_SET, MWIFIEX_SYNC_CMD,
 497                                  &hscfg)) {
 498                dev_err(adapter->dev, "IOCTL request HS enable failed\n");
 499                return false;
 500        }
 501
 502        if (wait_event_interruptible(adapter->hs_activate_wait_q,
 503                                     adapter->hs_activate_wait_q_woken)) {
 504                dev_err(adapter->dev, "hs_activate_wait_q terminated\n");
 505                return false;
 506        }
 507
 508        return true;
 509}
 510EXPORT_SYMBOL_GPL(mwifiex_enable_hs);
 511
 512/*
 513 * IOCTL request handler to get BSS information.
 514 *
 515 * This function collates the information from different driver structures
 516 * to send to the user.
 517 */
 518int mwifiex_get_bss_info(struct mwifiex_private *priv,
 519                         struct mwifiex_bss_info *info)
 520{
 521        struct mwifiex_adapter *adapter = priv->adapter;
 522        struct mwifiex_bssdescriptor *bss_desc;
 523
 524        if (!info)
 525                return -1;
 526
 527        bss_desc = &priv->curr_bss_params.bss_descriptor;
 528
 529        info->bss_mode = priv->bss_mode;
 530
 531        memcpy(&info->ssid, &bss_desc->ssid, sizeof(struct cfg80211_ssid));
 532
 533        memcpy(&info->bssid, &bss_desc->mac_address, ETH_ALEN);
 534
 535        info->bss_chan = bss_desc->channel;
 536
 537        memcpy(info->country_code, adapter->country_code,
 538               IEEE80211_COUNTRY_STRING_LEN);
 539
 540        info->media_connected = priv->media_connected;
 541
 542        info->max_power_level = priv->max_tx_power_level;
 543        info->min_power_level = priv->min_tx_power_level;
 544
 545        info->adhoc_state = priv->adhoc_state;
 546
 547        info->bcn_nf_last = priv->bcn_nf_last;
 548
 549        if (priv->sec_info.wep_enabled)
 550                info->wep_status = true;
 551        else
 552                info->wep_status = false;
 553
 554        info->is_hs_configured = adapter->is_hs_configured;
 555        info->is_deep_sleep = adapter->is_deep_sleep;
 556
 557        return 0;
 558}
 559
 560/*
 561 * The function disables auto deep sleep mode.
 562 */
 563int mwifiex_disable_auto_ds(struct mwifiex_private *priv)
 564{
 565        struct mwifiex_ds_auto_ds auto_ds;
 566
 567        auto_ds.auto_ds = DEEP_SLEEP_OFF;
 568
 569        return mwifiex_send_cmd_sync(priv, HostCmd_CMD_802_11_PS_MODE_ENH,
 570                                     DIS_AUTO_PS, BITMAP_AUTO_DS, &auto_ds);
 571}
 572EXPORT_SYMBOL_GPL(mwifiex_disable_auto_ds);
 573
 574/*
 575 * Sends IOCTL request to get the data rate.
 576 *
 577 * This function allocates the IOCTL request buffer, fills it
 578 * with requisite parameters and calls the IOCTL handler.
 579 */
 580int mwifiex_drv_get_data_rate(struct mwifiex_private *priv, u32 *rate)
 581{
 582        int ret;
 583
 584        ret = mwifiex_send_cmd_sync(priv, HostCmd_CMD_802_11_TX_RATE_QUERY,
 585                                    HostCmd_ACT_GEN_GET, 0, NULL);
 586
 587        if (!ret) {
 588                if (priv->is_data_rate_auto)
 589                        *rate = mwifiex_index_to_data_rate(priv, priv->tx_rate,
 590                                                           priv->tx_htinfo);
 591                else
 592                        *rate = priv->data_rate;
 593        }
 594
 595        return ret;
 596}
 597
 598/*
 599 * IOCTL request handler to set tx power configuration.
 600 *
 601 * This function prepares the correct firmware command and
 602 * issues it.
 603 *
 604 * For non-auto power mode, all the following power groups are set -
 605 *      - Modulation class HR/DSSS
 606 *      - Modulation class OFDM
 607 *      - Modulation class HTBW20
 608 *      - Modulation class HTBW40
 609 */
 610int mwifiex_set_tx_power(struct mwifiex_private *priv,
 611                         struct mwifiex_power_cfg *power_cfg)
 612{
 613        int ret;
 614        struct host_cmd_ds_txpwr_cfg *txp_cfg;
 615        struct mwifiex_types_power_group *pg_tlv;
 616        struct mwifiex_power_group *pg;
 617        u8 *buf;
 618        u16 dbm = 0;
 619
 620        if (!power_cfg->is_power_auto) {
 621                dbm = (u16) power_cfg->power_level;
 622                if ((dbm < priv->min_tx_power_level) ||
 623                    (dbm > priv->max_tx_power_level)) {
 624                        dev_err(priv->adapter->dev, "txpower value %d dBm"
 625                                " is out of range (%d dBm-%d dBm)\n",
 626                                dbm, priv->min_tx_power_level,
 627                                priv->max_tx_power_level);
 628                        return -1;
 629                }
 630        }
 631        buf = kzalloc(MWIFIEX_SIZE_OF_CMD_BUFFER, GFP_KERNEL);
 632        if (!buf)
 633                return -ENOMEM;
 634
 635        txp_cfg = (struct host_cmd_ds_txpwr_cfg *) buf;
 636        txp_cfg->action = cpu_to_le16(HostCmd_ACT_GEN_SET);
 637        if (!power_cfg->is_power_auto) {
 638                txp_cfg->mode = cpu_to_le32(1);
 639                pg_tlv = (struct mwifiex_types_power_group *)
 640                         (buf + sizeof(struct host_cmd_ds_txpwr_cfg));
 641                pg_tlv->type = TLV_TYPE_POWER_GROUP;
 642                pg_tlv->length = 4 * sizeof(struct mwifiex_power_group);
 643                pg = (struct mwifiex_power_group *)
 644                     (buf + sizeof(struct host_cmd_ds_txpwr_cfg)
 645                      + sizeof(struct mwifiex_types_power_group));
 646                /* Power group for modulation class HR/DSSS */
 647                pg->first_rate_code = 0x00;
 648                pg->last_rate_code = 0x03;
 649                pg->modulation_class = MOD_CLASS_HR_DSSS;
 650                pg->power_step = 0;
 651                pg->power_min = (s8) dbm;
 652                pg->power_max = (s8) dbm;
 653                pg++;
 654                /* Power group for modulation class OFDM */
 655                pg->first_rate_code = 0x00;
 656                pg->last_rate_code = 0x07;
 657                pg->modulation_class = MOD_CLASS_OFDM;
 658                pg->power_step = 0;
 659                pg->power_min = (s8) dbm;
 660                pg->power_max = (s8) dbm;
 661                pg++;
 662                /* Power group for modulation class HTBW20 */
 663                pg->first_rate_code = 0x00;
 664                pg->last_rate_code = 0x20;
 665                pg->modulation_class = MOD_CLASS_HT;
 666                pg->power_step = 0;
 667                pg->power_min = (s8) dbm;
 668                pg->power_max = (s8) dbm;
 669                pg->ht_bandwidth = HT_BW_20;
 670                pg++;
 671                /* Power group for modulation class HTBW40 */
 672                pg->first_rate_code = 0x00;
 673                pg->last_rate_code = 0x20;
 674                pg->modulation_class = MOD_CLASS_HT;
 675                pg->power_step = 0;
 676                pg->power_min = (s8) dbm;
 677                pg->power_max = (s8) dbm;
 678                pg->ht_bandwidth = HT_BW_40;
 679        }
 680        ret = mwifiex_send_cmd_sync(priv, HostCmd_CMD_TXPWR_CFG,
 681                                    HostCmd_ACT_GEN_SET, 0, buf);
 682
 683        kfree(buf);
 684        return ret;
 685}
 686
 687/*
 688 * IOCTL request handler to get power save mode.
 689 *
 690 * This function prepares the correct firmware command and
 691 * issues it.
 692 */
 693int mwifiex_drv_set_power(struct mwifiex_private *priv, u32 *ps_mode)
 694{
 695        int ret;
 696        struct mwifiex_adapter *adapter = priv->adapter;
 697        u16 sub_cmd;
 698
 699        if (*ps_mode)
 700                adapter->ps_mode = MWIFIEX_802_11_POWER_MODE_PSP;
 701        else
 702                adapter->ps_mode = MWIFIEX_802_11_POWER_MODE_CAM;
 703        sub_cmd = (*ps_mode) ? EN_AUTO_PS : DIS_AUTO_PS;
 704        ret = mwifiex_send_cmd_sync(priv, HostCmd_CMD_802_11_PS_MODE_ENH,
 705                                    sub_cmd, BITMAP_STA_PS, NULL);
 706        if ((!ret) && (sub_cmd == DIS_AUTO_PS))
 707                ret = mwifiex_send_cmd_async(priv,
 708                                             HostCmd_CMD_802_11_PS_MODE_ENH,
 709                                             GET_PS, 0, NULL);
 710
 711        return ret;
 712}
 713
 714/*
 715 * IOCTL request handler to set/reset WPA IE.
 716 *
 717 * The supplied WPA IE is treated as a opaque buffer. Only the first field
 718 * is checked to determine WPA version. If buffer length is zero, the existing
 719 * WPA IE is reset.
 720 */
 721static int mwifiex_set_wpa_ie_helper(struct mwifiex_private *priv,
 722                                     u8 *ie_data_ptr, u16 ie_len)
 723{
 724        if (ie_len) {
 725                if (ie_len > sizeof(priv->wpa_ie)) {
 726                        dev_err(priv->adapter->dev,
 727                                "failed to copy WPA IE, too big\n");
 728                        return -1;
 729                }
 730                memcpy(priv->wpa_ie, ie_data_ptr, ie_len);
 731                priv->wpa_ie_len = (u8) ie_len;
 732                dev_dbg(priv->adapter->dev, "cmd: Set Wpa_ie_len=%d IE=%#x\n",
 733                        priv->wpa_ie_len, priv->wpa_ie[0]);
 734
 735                if (priv->wpa_ie[0] == WLAN_EID_VENDOR_SPECIFIC) {
 736                        priv->sec_info.wpa_enabled = true;
 737                } else if (priv->wpa_ie[0] == WLAN_EID_RSN) {
 738                        priv->sec_info.wpa2_enabled = true;
 739                } else {
 740                        priv->sec_info.wpa_enabled = false;
 741                        priv->sec_info.wpa2_enabled = false;
 742                }
 743        } else {
 744                memset(priv->wpa_ie, 0, sizeof(priv->wpa_ie));
 745                priv->wpa_ie_len = 0;
 746                dev_dbg(priv->adapter->dev, "info: reset wpa_ie_len=%d IE=%#x\n",
 747                        priv->wpa_ie_len, priv->wpa_ie[0]);
 748                priv->sec_info.wpa_enabled = false;
 749                priv->sec_info.wpa2_enabled = false;
 750        }
 751
 752        return 0;
 753}
 754
 755/*
 756 * IOCTL request handler to set/reset WAPI IE.
 757 *
 758 * The supplied WAPI IE is treated as a opaque buffer. Only the first field
 759 * is checked to internally enable WAPI. If buffer length is zero, the existing
 760 * WAPI IE is reset.
 761 */
 762static int mwifiex_set_wapi_ie(struct mwifiex_private *priv,
 763                               u8 *ie_data_ptr, u16 ie_len)
 764{
 765        if (ie_len) {
 766                if (ie_len > sizeof(priv->wapi_ie)) {
 767                        dev_dbg(priv->adapter->dev,
 768                                "info: failed to copy WAPI IE, too big\n");
 769                        return -1;
 770                }
 771                memcpy(priv->wapi_ie, ie_data_ptr, ie_len);
 772                priv->wapi_ie_len = ie_len;
 773                dev_dbg(priv->adapter->dev, "cmd: Set wapi_ie_len=%d IE=%#x\n",
 774                        priv->wapi_ie_len, priv->wapi_ie[0]);
 775
 776                if (priv->wapi_ie[0] == WLAN_EID_BSS_AC_ACCESS_DELAY)
 777                        priv->sec_info.wapi_enabled = true;
 778        } else {
 779                memset(priv->wapi_ie, 0, sizeof(priv->wapi_ie));
 780                priv->wapi_ie_len = ie_len;
 781                dev_dbg(priv->adapter->dev,
 782                        "info: Reset wapi_ie_len=%d IE=%#x\n",
 783                       priv->wapi_ie_len, priv->wapi_ie[0]);
 784                priv->sec_info.wapi_enabled = false;
 785        }
 786        return 0;
 787}
 788
 789/*
 790 * IOCTL request handler to set/reset WPS IE.
 791 *
 792 * The supplied WPS IE is treated as a opaque buffer. Only the first field
 793 * is checked to internally enable WPS. If buffer length is zero, the existing
 794 * WPS IE is reset.
 795 */
 796static int mwifiex_set_wps_ie(struct mwifiex_private *priv,
 797                               u8 *ie_data_ptr, u16 ie_len)
 798{
 799        if (ie_len) {
 800                if (ie_len > MWIFIEX_MAX_VSIE_LEN) {
 801                        dev_dbg(priv->adapter->dev,
 802                                "info: failed to copy WPS IE, too big\n");
 803                        return -1;
 804                }
 805
 806                priv->wps_ie = kzalloc(MWIFIEX_MAX_VSIE_LEN, GFP_KERNEL);
 807                if (!priv->wps_ie)
 808                        return -ENOMEM;
 809
 810                memcpy(priv->wps_ie, ie_data_ptr, ie_len);
 811                priv->wps_ie_len = ie_len;
 812                dev_dbg(priv->adapter->dev, "cmd: Set wps_ie_len=%d IE=%#x\n",
 813                        priv->wps_ie_len, priv->wps_ie[0]);
 814        } else {
 815                kfree(priv->wps_ie);
 816                priv->wps_ie_len = ie_len;
 817                dev_dbg(priv->adapter->dev,
 818                        "info: Reset wps_ie_len=%d\n", priv->wps_ie_len);
 819        }
 820        return 0;
 821}
 822
 823/*
 824 * IOCTL request handler to set WAPI key.
 825 *
 826 * This function prepares the correct firmware command and
 827 * issues it.
 828 */
 829static int mwifiex_sec_ioctl_set_wapi_key(struct mwifiex_private *priv,
 830                               struct mwifiex_ds_encrypt_key *encrypt_key)
 831{
 832
 833        return mwifiex_send_cmd_sync(priv, HostCmd_CMD_802_11_KEY_MATERIAL,
 834                                     HostCmd_ACT_GEN_SET, KEY_INFO_ENABLED,
 835                                     encrypt_key);
 836}
 837
 838/*
 839 * IOCTL request handler to set WEP network key.
 840 *
 841 * This function prepares the correct firmware command and
 842 * issues it, after validation checks.
 843 */
 844static int mwifiex_sec_ioctl_set_wep_key(struct mwifiex_private *priv,
 845                              struct mwifiex_ds_encrypt_key *encrypt_key)
 846{
 847        int ret;
 848        struct mwifiex_wep_key *wep_key;
 849        int index;
 850
 851        if (priv->wep_key_curr_index >= NUM_WEP_KEYS)
 852                priv->wep_key_curr_index = 0;
 853        wep_key = &priv->wep_key[priv->wep_key_curr_index];
 854        index = encrypt_key->key_index;
 855        if (encrypt_key->key_disable) {
 856                priv->sec_info.wep_enabled = 0;
 857        } else if (!encrypt_key->key_len) {
 858                /* Copy the required key as the current key */
 859                wep_key = &priv->wep_key[index];
 860                if (!wep_key->key_length) {
 861                        dev_err(priv->adapter->dev,
 862                                "key not set, so cannot enable it\n");
 863                        return -1;
 864                }
 865                priv->wep_key_curr_index = (u16) index;
 866                priv->sec_info.wep_enabled = 1;
 867        } else {
 868                wep_key = &priv->wep_key[index];
 869                memset(wep_key, 0, sizeof(struct mwifiex_wep_key));
 870                /* Copy the key in the driver */
 871                memcpy(wep_key->key_material,
 872                       encrypt_key->key_material,
 873                       encrypt_key->key_len);
 874                wep_key->key_index = index;
 875                wep_key->key_length = encrypt_key->key_len;
 876                priv->sec_info.wep_enabled = 1;
 877        }
 878        if (wep_key->key_length) {
 879                /* Send request to firmware */
 880                ret = mwifiex_send_cmd_async(priv,
 881                                             HostCmd_CMD_802_11_KEY_MATERIAL,
 882                                             HostCmd_ACT_GEN_SET, 0, NULL);
 883                if (ret)
 884                        return ret;
 885        }
 886        if (priv->sec_info.wep_enabled)
 887                priv->curr_pkt_filter |= HostCmd_ACT_MAC_WEP_ENABLE;
 888        else
 889                priv->curr_pkt_filter &= ~HostCmd_ACT_MAC_WEP_ENABLE;
 890
 891        ret = mwifiex_send_cmd_sync(priv, HostCmd_CMD_MAC_CONTROL,
 892                                    HostCmd_ACT_GEN_SET, 0,
 893                                    &priv->curr_pkt_filter);
 894
 895        return ret;
 896}
 897
 898/*
 899 * IOCTL request handler to set WPA key.
 900 *
 901 * This function prepares the correct firmware command and
 902 * issues it, after validation checks.
 903 *
 904 * Current driver only supports key length of up to 32 bytes.
 905 *
 906 * This function can also be used to disable a currently set key.
 907 */
 908static int mwifiex_sec_ioctl_set_wpa_key(struct mwifiex_private *priv,
 909                              struct mwifiex_ds_encrypt_key *encrypt_key)
 910{
 911        int ret;
 912        u8 remove_key = false;
 913        struct host_cmd_ds_802_11_key_material *ibss_key;
 914
 915        /* Current driver only supports key length of up to 32 bytes */
 916        if (encrypt_key->key_len > WLAN_MAX_KEY_LEN) {
 917                dev_err(priv->adapter->dev, "key length too long\n");
 918                return -1;
 919        }
 920
 921        if (priv->bss_mode == NL80211_IFTYPE_ADHOC) {
 922                /*
 923                 * IBSS/WPA-None uses only one key (Group) for both receiving
 924                 * and sending unicast and multicast packets.
 925                 */
 926                /* Send the key as PTK to firmware */
 927                encrypt_key->key_index = MWIFIEX_KEY_INDEX_UNICAST;
 928                ret = mwifiex_send_cmd_async(priv,
 929                                             HostCmd_CMD_802_11_KEY_MATERIAL,
 930                                             HostCmd_ACT_GEN_SET,
 931                                             KEY_INFO_ENABLED, encrypt_key);
 932                if (ret)
 933                        return ret;
 934
 935                ibss_key = &priv->aes_key;
 936                memset(ibss_key, 0,
 937                       sizeof(struct host_cmd_ds_802_11_key_material));
 938                /* Copy the key in the driver */
 939                memcpy(ibss_key->key_param_set.key, encrypt_key->key_material,
 940                       encrypt_key->key_len);
 941                memcpy(&ibss_key->key_param_set.key_len, &encrypt_key->key_len,
 942                       sizeof(ibss_key->key_param_set.key_len));
 943                ibss_key->key_param_set.key_type_id
 944                        = cpu_to_le16(KEY_TYPE_ID_TKIP);
 945                ibss_key->key_param_set.key_info = cpu_to_le16(KEY_ENABLED);
 946
 947                /* Send the key as GTK to firmware */
 948                encrypt_key->key_index = ~MWIFIEX_KEY_INDEX_UNICAST;
 949        }
 950
 951        if (!encrypt_key->key_index)
 952                encrypt_key->key_index = MWIFIEX_KEY_INDEX_UNICAST;
 953
 954        if (remove_key)
 955                ret = mwifiex_send_cmd_sync(priv,
 956                                            HostCmd_CMD_802_11_KEY_MATERIAL,
 957                                            HostCmd_ACT_GEN_SET,
 958                                            !KEY_INFO_ENABLED, encrypt_key);
 959        else
 960                ret = mwifiex_send_cmd_sync(priv,
 961                                            HostCmd_CMD_802_11_KEY_MATERIAL,
 962                                            HostCmd_ACT_GEN_SET,
 963                                            KEY_INFO_ENABLED, encrypt_key);
 964
 965        return ret;
 966}
 967
 968/*
 969 * IOCTL request handler to set/get network keys.
 970 *
 971 * This is a generic key handling function which supports WEP, WPA
 972 * and WAPI.
 973 */
 974static int
 975mwifiex_sec_ioctl_encrypt_key(struct mwifiex_private *priv,
 976                              struct mwifiex_ds_encrypt_key *encrypt_key)
 977{
 978        int status;
 979
 980        if (encrypt_key->is_wapi_key)
 981                status = mwifiex_sec_ioctl_set_wapi_key(priv, encrypt_key);
 982        else if (encrypt_key->key_len > WLAN_KEY_LEN_WEP104)
 983                status = mwifiex_sec_ioctl_set_wpa_key(priv, encrypt_key);
 984        else
 985                status = mwifiex_sec_ioctl_set_wep_key(priv, encrypt_key);
 986        return status;
 987}
 988
 989/*
 990 * This function returns the driver version.
 991 */
 992int
 993mwifiex_drv_get_driver_version(struct mwifiex_adapter *adapter, char *version,
 994                               int max_len)
 995{
 996        union {
 997                u32 l;
 998                u8 c[4];
 999        } ver;
1000        char fw_ver[32];
1001
1002        ver.l = adapter->fw_release_number;
1003        sprintf(fw_ver, "%u.%u.%u.p%u", ver.c[2], ver.c[1], ver.c[0], ver.c[3]);
1004
1005        snprintf(version, max_len, driver_version, fw_ver);
1006
1007        dev_dbg(adapter->dev, "info: MWIFIEX VERSION: %s\n", version);
1008
1009        return 0;
1010}
1011
1012/*
1013 * Sends IOCTL request to set encoding parameters.
1014 *
1015 * This function allocates the IOCTL request buffer, fills it
1016 * with requisite parameters and calls the IOCTL handler.
1017 */
1018int mwifiex_set_encode(struct mwifiex_private *priv, struct key_params *kp,
1019                       const u8 *key, int key_len, u8 key_index,
1020                       const u8 *mac_addr, int disable)
1021{
1022        struct mwifiex_ds_encrypt_key encrypt_key;
1023
1024        memset(&encrypt_key, 0, sizeof(struct mwifiex_ds_encrypt_key));
1025        encrypt_key.key_len = key_len;
1026
1027        if (kp && kp->cipher == WLAN_CIPHER_SUITE_AES_CMAC)
1028                encrypt_key.is_igtk_key = true;
1029
1030        if (!disable) {
1031                encrypt_key.key_index = key_index;
1032                if (key_len)
1033                        memcpy(encrypt_key.key_material, key, key_len);
1034                if (mac_addr)
1035                        memcpy(encrypt_key.mac_addr, mac_addr, ETH_ALEN);
1036                if (kp && kp->seq && kp->seq_len)
1037                        memcpy(encrypt_key.pn, kp->seq, kp->seq_len);
1038        } else {
1039                encrypt_key.key_disable = true;
1040                if (mac_addr)
1041                        memcpy(encrypt_key.mac_addr, mac_addr, ETH_ALEN);
1042        }
1043
1044        return mwifiex_sec_ioctl_encrypt_key(priv, &encrypt_key);
1045}
1046
1047/*
1048 * Sends IOCTL request to get extended version.
1049 *
1050 * This function allocates the IOCTL request buffer, fills it
1051 * with requisite parameters and calls the IOCTL handler.
1052 */
1053int
1054mwifiex_get_ver_ext(struct mwifiex_private *priv)
1055{
1056        struct mwifiex_ver_ext ver_ext;
1057
1058        memset(&ver_ext, 0, sizeof(struct host_cmd_ds_version_ext));
1059        if (mwifiex_send_cmd_sync(priv, HostCmd_CMD_VERSION_EXT,
1060                                  HostCmd_ACT_GEN_GET, 0, &ver_ext))
1061                return -1;
1062
1063        return 0;
1064}
1065
1066int
1067mwifiex_remain_on_chan_cfg(struct mwifiex_private *priv, u16 action,
1068                           struct ieee80211_channel *chan,
1069                           unsigned int duration)
1070{
1071        struct host_cmd_ds_remain_on_chan roc_cfg;
1072        u8 sc;
1073
1074        memset(&roc_cfg, 0, sizeof(roc_cfg));
1075        roc_cfg.action = cpu_to_le16(action);
1076        if (action == HostCmd_ACT_GEN_SET) {
1077                roc_cfg.band_cfg = chan->band;
1078                sc = mwifiex_chan_type_to_sec_chan_offset(NL80211_CHAN_NO_HT);
1079                roc_cfg.band_cfg |= (sc << 2);
1080
1081                roc_cfg.channel =
1082                        ieee80211_frequency_to_channel(chan->center_freq);
1083                roc_cfg.duration = cpu_to_le32(duration);
1084        }
1085        if (mwifiex_send_cmd_sync(priv, HostCmd_CMD_REMAIN_ON_CHAN,
1086                                  action, 0, &roc_cfg)) {
1087                dev_err(priv->adapter->dev, "failed to remain on channel\n");
1088                return -1;
1089        }
1090
1091        return roc_cfg.status;
1092}
1093
1094int
1095mwifiex_set_bss_role(struct mwifiex_private *priv, u8 bss_role)
1096{
1097        if (GET_BSS_ROLE(priv) == bss_role) {
1098                dev_dbg(priv->adapter->dev,
1099                        "info: already in the desired role.\n");
1100                return 0;
1101        }
1102
1103        mwifiex_free_priv(priv);
1104        mwifiex_init_priv(priv);
1105
1106        priv->bss_role = bss_role;
1107        switch (bss_role) {
1108        case MWIFIEX_BSS_ROLE_UAP:
1109                priv->bss_mode = NL80211_IFTYPE_AP;
1110                break;
1111        case MWIFIEX_BSS_ROLE_STA:
1112        case MWIFIEX_BSS_ROLE_ANY:
1113        default:
1114                priv->bss_mode = NL80211_IFTYPE_STATION;
1115                break;
1116        }
1117
1118        mwifiex_send_cmd_sync(priv, HostCmd_CMD_SET_BSS_MODE,
1119                              HostCmd_ACT_GEN_SET, 0, NULL);
1120
1121        return mwifiex_sta_init_cmd(priv, false);
1122}
1123
1124/*
1125 * Sends IOCTL request to get statistics information.
1126 *
1127 * This function allocates the IOCTL request buffer, fills it
1128 * with requisite parameters and calls the IOCTL handler.
1129 */
1130int
1131mwifiex_get_stats_info(struct mwifiex_private *priv,
1132                       struct mwifiex_ds_get_stats *log)
1133{
1134        return mwifiex_send_cmd_sync(priv, HostCmd_CMD_802_11_GET_LOG,
1135                                     HostCmd_ACT_GEN_GET, 0, log);
1136}
1137
1138/*
1139 * IOCTL request handler to read/write register.
1140 *
1141 * This function prepares the correct firmware command and
1142 * issues it.
1143 *
1144 * Access to the following registers are supported -
1145 *      - MAC
1146 *      - BBP
1147 *      - RF
1148 *      - PMIC
1149 *      - CAU
1150 */
1151static int mwifiex_reg_mem_ioctl_reg_rw(struct mwifiex_private *priv,
1152                                        struct mwifiex_ds_reg_rw *reg_rw,
1153                                        u16 action)
1154{
1155        u16 cmd_no;
1156
1157        switch (le32_to_cpu(reg_rw->type)) {
1158        case MWIFIEX_REG_MAC:
1159                cmd_no = HostCmd_CMD_MAC_REG_ACCESS;
1160                break;
1161        case MWIFIEX_REG_BBP:
1162                cmd_no = HostCmd_CMD_BBP_REG_ACCESS;
1163                break;
1164        case MWIFIEX_REG_RF:
1165                cmd_no = HostCmd_CMD_RF_REG_ACCESS;
1166                break;
1167        case MWIFIEX_REG_PMIC:
1168                cmd_no = HostCmd_CMD_PMIC_REG_ACCESS;
1169                break;
1170        case MWIFIEX_REG_CAU:
1171                cmd_no = HostCmd_CMD_CAU_REG_ACCESS;
1172                break;
1173        default:
1174                return -1;
1175        }
1176
1177        return mwifiex_send_cmd_sync(priv, cmd_no, action, 0, reg_rw);
1178
1179}
1180
1181/*
1182 * Sends IOCTL request to write to a register.
1183 *
1184 * This function allocates the IOCTL request buffer, fills it
1185 * with requisite parameters and calls the IOCTL handler.
1186 */
1187int
1188mwifiex_reg_write(struct mwifiex_private *priv, u32 reg_type,
1189                  u32 reg_offset, u32 reg_value)
1190{
1191        struct mwifiex_ds_reg_rw reg_rw;
1192
1193        reg_rw.type = cpu_to_le32(reg_type);
1194        reg_rw.offset = cpu_to_le32(reg_offset);
1195        reg_rw.value = cpu_to_le32(reg_value);
1196
1197        return mwifiex_reg_mem_ioctl_reg_rw(priv, &reg_rw, HostCmd_ACT_GEN_SET);
1198}
1199
1200/*
1201 * Sends IOCTL request to read from a register.
1202 *
1203 * This function allocates the IOCTL request buffer, fills it
1204 * with requisite parameters and calls the IOCTL handler.
1205 */
1206int
1207mwifiex_reg_read(struct mwifiex_private *priv, u32 reg_type,
1208                 u32 reg_offset, u32 *value)
1209{
1210        int ret;
1211        struct mwifiex_ds_reg_rw reg_rw;
1212
1213        reg_rw.type = cpu_to_le32(reg_type);
1214        reg_rw.offset = cpu_to_le32(reg_offset);
1215        ret = mwifiex_reg_mem_ioctl_reg_rw(priv, &reg_rw, HostCmd_ACT_GEN_GET);
1216
1217        if (ret)
1218                goto done;
1219
1220        *value = le32_to_cpu(reg_rw.value);
1221
1222done:
1223        return ret;
1224}
1225
1226/*
1227 * Sends IOCTL request to read from EEPROM.
1228 *
1229 * This function allocates the IOCTL request buffer, fills it
1230 * with requisite parameters and calls the IOCTL handler.
1231 */
1232int
1233mwifiex_eeprom_read(struct mwifiex_private *priv, u16 offset, u16 bytes,
1234                    u8 *value)
1235{
1236        int ret;
1237        struct mwifiex_ds_read_eeprom rd_eeprom;
1238
1239        rd_eeprom.offset = cpu_to_le16((u16) offset);
1240        rd_eeprom.byte_count = cpu_to_le16((u16) bytes);
1241
1242        /* Send request to firmware */
1243        ret = mwifiex_send_cmd_sync(priv, HostCmd_CMD_802_11_EEPROM_ACCESS,
1244                                    HostCmd_ACT_GEN_GET, 0, &rd_eeprom);
1245
1246        if (!ret)
1247                memcpy(value, rd_eeprom.value, MAX_EEPROM_DATA);
1248        return ret;
1249}
1250
1251/*
1252 * This function sets a generic IE. In addition to generic IE, it can
1253 * also handle WPA, WPA2 and WAPI IEs.
1254 */
1255static int
1256mwifiex_set_gen_ie_helper(struct mwifiex_private *priv, u8 *ie_data_ptr,
1257                          u16 ie_len)
1258{
1259        int ret = 0;
1260        struct ieee_types_vendor_header *pvendor_ie;
1261        const u8 wpa_oui[] = { 0x00, 0x50, 0xf2, 0x01 };
1262        const u8 wps_oui[] = { 0x00, 0x50, 0xf2, 0x04 };
1263
1264        /* If the passed length is zero, reset the buffer */
1265        if (!ie_len) {
1266                priv->gen_ie_buf_len = 0;
1267                priv->wps.session_enable = false;
1268
1269                return 0;
1270        } else if (!ie_data_ptr) {
1271                return -1;
1272        }
1273        pvendor_ie = (struct ieee_types_vendor_header *) ie_data_ptr;
1274        /* Test to see if it is a WPA IE, if not, then it is a gen IE */
1275        if (((pvendor_ie->element_id == WLAN_EID_VENDOR_SPECIFIC) &&
1276             (!memcmp(pvendor_ie->oui, wpa_oui, sizeof(wpa_oui)))) ||
1277            (pvendor_ie->element_id == WLAN_EID_RSN)) {
1278
1279                /* IE is a WPA/WPA2 IE so call set_wpa function */
1280                ret = mwifiex_set_wpa_ie_helper(priv, ie_data_ptr, ie_len);
1281                priv->wps.session_enable = false;
1282
1283                return ret;
1284        } else if (pvendor_ie->element_id == WLAN_EID_BSS_AC_ACCESS_DELAY) {
1285                /* IE is a WAPI IE so call set_wapi function */
1286                ret = mwifiex_set_wapi_ie(priv, ie_data_ptr, ie_len);
1287
1288                return ret;
1289        }
1290        /*
1291         * Verify that the passed length is not larger than the
1292         * available space remaining in the buffer
1293         */
1294        if (ie_len < (sizeof(priv->gen_ie_buf) - priv->gen_ie_buf_len)) {
1295
1296                /* Test to see if it is a WPS IE, if so, enable
1297                 * wps session flag
1298                 */
1299                pvendor_ie = (struct ieee_types_vendor_header *) ie_data_ptr;
1300                if ((pvendor_ie->element_id == WLAN_EID_VENDOR_SPECIFIC) &&
1301                    (!memcmp(pvendor_ie->oui, wps_oui, sizeof(wps_oui)))) {
1302                        priv->wps.session_enable = true;
1303                        dev_dbg(priv->adapter->dev,
1304                                "info: WPS Session Enabled.\n");
1305                        ret = mwifiex_set_wps_ie(priv, ie_data_ptr, ie_len);
1306                }
1307
1308                /* Append the passed data to the end of the
1309                   genIeBuffer */
1310                memcpy(priv->gen_ie_buf + priv->gen_ie_buf_len, ie_data_ptr,
1311                       ie_len);
1312                /* Increment the stored buffer length by the
1313                   size passed */
1314                priv->gen_ie_buf_len += ie_len;
1315        } else {
1316                /* Passed data does not fit in the remaining
1317                   buffer space */
1318                ret = -1;
1319        }
1320
1321        /* Return 0, or -1 for error case */
1322        return ret;
1323}
1324
1325/*
1326 * IOCTL request handler to set/get generic IE.
1327 *
1328 * In addition to various generic IEs, this function can also be
1329 * used to set the ARP filter.
1330 */
1331static int mwifiex_misc_ioctl_gen_ie(struct mwifiex_private *priv,
1332                                     struct mwifiex_ds_misc_gen_ie *gen_ie,
1333                                     u16 action)
1334{
1335        struct mwifiex_adapter *adapter = priv->adapter;
1336
1337        switch (gen_ie->type) {
1338        case MWIFIEX_IE_TYPE_GEN_IE:
1339                if (action == HostCmd_ACT_GEN_GET) {
1340                        gen_ie->len = priv->wpa_ie_len;
1341                        memcpy(gen_ie->ie_data, priv->wpa_ie, gen_ie->len);
1342                } else {
1343                        mwifiex_set_gen_ie_helper(priv, gen_ie->ie_data,
1344                                                  (u16) gen_ie->len);
1345                }
1346                break;
1347        case MWIFIEX_IE_TYPE_ARP_FILTER:
1348                memset(adapter->arp_filter, 0, sizeof(adapter->arp_filter));
1349                if (gen_ie->len > ARP_FILTER_MAX_BUF_SIZE) {
1350                        adapter->arp_filter_size = 0;
1351                        dev_err(adapter->dev, "invalid ARP filter size\n");
1352                        return -1;
1353                } else {
1354                        memcpy(adapter->arp_filter, gen_ie->ie_data,
1355                               gen_ie->len);
1356                        adapter->arp_filter_size = gen_ie->len;
1357                }
1358                break;
1359        default:
1360                dev_err(adapter->dev, "invalid IE type\n");
1361                return -1;
1362        }
1363        return 0;
1364}
1365
1366/*
1367 * Sends IOCTL request to set a generic IE.
1368 *
1369 * This function allocates the IOCTL request buffer, fills it
1370 * with requisite parameters and calls the IOCTL handler.
1371 */
1372int
1373mwifiex_set_gen_ie(struct mwifiex_private *priv, u8 *ie, int ie_len)
1374{
1375        struct mwifiex_ds_misc_gen_ie gen_ie;
1376
1377        if (ie_len > IEEE_MAX_IE_SIZE)
1378                return -EFAULT;
1379
1380        gen_ie.type = MWIFIEX_IE_TYPE_GEN_IE;
1381        gen_ie.len = ie_len;
1382        memcpy(gen_ie.ie_data, ie, ie_len);
1383        if (mwifiex_misc_ioctl_gen_ie(priv, &gen_ie, HostCmd_ACT_GEN_SET))
1384                return -EFAULT;
1385
1386        return 0;
1387}
1388