1/* 2 * Copyright 1998-2008 VIA Technologies, Inc. All Rights Reserved. 3 * Copyright 2001-2008 S3 Graphics, Inc. All Rights Reserved. 4 5 * This program is free software; you can redistribute it and/or 6 * modify it under the terms of the GNU General Public 7 * License as published by the Free Software Foundation; 8 * either version 2, or (at your option) any later version. 9 10 * This program is distributed in the hope that it will be useful, 11 * but WITHOUT ANY WARRANTIES OR REPRESENTATIONS; without even 12 * the implied warranty of MERCHANTABILITY or FITNESS FOR 13 * A PARTICULAR PURPOSE.See the GNU General Public License 14 * for more details. 15 16 * You should have received a copy of the GNU General Public License 17 * along with this program; if not, write to the Free Software 18 * Foundation, Inc., 19 * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. 20 */ 21 22#ifndef __ACCEL_H__ 23#define __ACCEL_H__ 24 25#define FB_ACCEL_VIA_UNICHROME 50 26 27/* MMIO Base Address Definition */ 28#define MMIO_VGABASE 0x8000 29#define MMIO_CR_READ (MMIO_VGABASE + 0x3D4) 30#define MMIO_CR_WRITE (MMIO_VGABASE + 0x3D5) 31#define MMIO_SR_READ (MMIO_VGABASE + 0x3C4) 32#define MMIO_SR_WRITE (MMIO_VGABASE + 0x3C5) 33 34/* HW Cursor Status Define */ 35#define HW_Cursor_ON 0 36#define HW_Cursor_OFF 1 37 38#define CURSOR_SIZE (8 * 1024) 39#define VQ_SIZE (256 * 1024) 40 41#define VIA_MMIO_BLTBASE 0x200000 42#define VIA_MMIO_BLTSIZE 0x200000 43 44/* Defines for 2D registers */ 45#define VIA_REG_GECMD 0x000 46#define VIA_REG_GEMODE 0x004 47#define VIA_REG_SRCPOS 0x008 48#define VIA_REG_DSTPOS 0x00C 49/* width and height */ 50#define VIA_REG_DIMENSION 0x010 51#define VIA_REG_PATADDR 0x014 52#define VIA_REG_FGCOLOR 0x018 53#define VIA_REG_BGCOLOR 0x01C 54/* top and left of clipping */ 55#define VIA_REG_CLIPTL 0x020 56/* bottom and right of clipping */ 57#define VIA_REG_CLIPBR 0x024 58#define VIA_REG_OFFSET 0x028 59/* color key control */ 60#define VIA_REG_KEYCONTROL 0x02C 61#define VIA_REG_SRCBASE 0x030 62#define VIA_REG_DSTBASE 0x034 63/* pitch of src and dst */ 64#define VIA_REG_PITCH 0x038 65#define VIA_REG_MONOPAT0 0x03C 66#define VIA_REG_MONOPAT1 0x040 67/* from 0x100 to 0x1ff */ 68#define VIA_REG_COLORPAT 0x100 69 70/* defines for VIA 2D registers for vt3353/3409 (M1 engine)*/ 71#define VIA_REG_GECMD_M1 0x000 72#define VIA_REG_GEMODE_M1 0x004 73#define VIA_REG_GESTATUS_M1 0x004 /* as same as VIA_REG_GEMODE */ 74#define VIA_REG_PITCH_M1 0x008 /* pitch of src and dst */ 75#define VIA_REG_DIMENSION_M1 0x00C /* width and height */ 76#define VIA_REG_DSTPOS_M1 0x010 77#define VIA_REG_LINE_XY_M1 0x010 78#define VIA_REG_DSTBASE_M1 0x014 79#define VIA_REG_SRCPOS_M1 0x018 80#define VIA_REG_LINE_K1K2_M1 0x018 81#define VIA_REG_SRCBASE_M1 0x01C 82#define VIA_REG_PATADDR_M1 0x020 83#define VIA_REG_MONOPAT0_M1 0x024 84#define VIA_REG_MONOPAT1_M1 0x028 85#define VIA_REG_OFFSET_M1 0x02C 86#define VIA_REG_LINE_ERROR_M1 0x02C 87#define VIA_REG_CLIPTL_M1 0x040 /* top and left of clipping */ 88#define VIA_REG_CLIPBR_M1 0x044 /* bottom and right of clipping */ 89#define VIA_REG_KEYCONTROL_M1 0x048 /* color key control */ 90#define VIA_REG_FGCOLOR_M1 0x04C 91#define VIA_REG_DSTCOLORKEY_M1 0x04C /* as same as VIA_REG_FG */ 92#define VIA_REG_BGCOLOR_M1 0x050 93#define VIA_REG_SRCCOLORKEY_M1 0x050 /* as same as VIA_REG_BG */ 94#define VIA_REG_MONOPATFGC_M1 0x058 /* Add BG color of Pattern. */ 95#define VIA_REG_MONOPATBGC_M1 0x05C /* Add FG color of Pattern. */ 96#define VIA_REG_COLORPAT_M1 0x100 /* from 0x100 to 0x1ff */ 97 98/* VIA_REG_PITCH(0x38): Pitch Setting */ 99#define VIA_PITCH_ENABLE 0x80000000 100 101/* defines for VIA HW cursor registers */ 102#define VIA_REG_CURSOR_MODE 0x2D0 103#define VIA_REG_CURSOR_POS 0x2D4 104#define VIA_REG_CURSOR_ORG 0x2D8 105#define VIA_REG_CURSOR_BG 0x2DC 106#define VIA_REG_CURSOR_FG 0x2E0 107 108/* VIA_REG_GEMODE(0x04): GE mode */ 109#define VIA_GEM_8bpp 0x00000000 110#define VIA_GEM_16bpp 0x00000100 111#define VIA_GEM_32bpp 0x00000300 112 113/* VIA_REG_GECMD(0x00): 2D Engine Command */ 114#define VIA_GEC_NOOP 0x00000000 115#define VIA_GEC_BLT 0x00000001 116#define VIA_GEC_LINE 0x00000005 117 118/* Rotate Command */ 119#define VIA_GEC_ROT 0x00000008 120 121#define VIA_GEC_SRC_XY 0x00000000 122#define VIA_GEC_SRC_LINEAR 0x00000010 123#define VIA_GEC_DST_XY 0x00000000 124#define VIA_GEC_DST_LINRAT 0x00000020 125 126#define VIA_GEC_SRC_FB 0x00000000 127#define VIA_GEC_SRC_SYS 0x00000040 128#define VIA_GEC_DST_FB 0x00000000 129#define VIA_GEC_DST_SYS 0x00000080 130 131/* source is mono */ 132#define VIA_GEC_SRC_MONO 0x00000100 133/* pattern is mono */ 134#define VIA_GEC_PAT_MONO 0x00000200 135/* mono src is opaque */ 136#define VIA_GEC_MSRC_OPAQUE 0x00000000 137/* mono src is transparent */ 138#define VIA_GEC_MSRC_TRANS 0x00000400 139/* pattern is in frame buffer */ 140#define VIA_GEC_PAT_FB 0x00000000 141/* pattern is from reg setting */ 142#define VIA_GEC_PAT_REG 0x00000800 143 144#define VIA_GEC_CLIP_DISABLE 0x00000000 145#define VIA_GEC_CLIP_ENABLE 0x00001000 146 147#define VIA_GEC_FIXCOLOR_PAT 0x00002000 148 149#define VIA_GEC_INCX 0x00000000 150#define VIA_GEC_DECY 0x00004000 151#define VIA_GEC_INCY 0x00000000 152#define VIA_GEC_DECX 0x00008000 153/* mono pattern is opaque */ 154#define VIA_GEC_MPAT_OPAQUE 0x00000000 155/* mono pattern is transparent */ 156#define VIA_GEC_MPAT_TRANS 0x00010000 157 158#define VIA_GEC_MONO_UNPACK 0x00000000 159#define VIA_GEC_MONO_PACK 0x00020000 160#define VIA_GEC_MONO_DWORD 0x00000000 161#define VIA_GEC_MONO_WORD 0x00040000 162#define VIA_GEC_MONO_BYTE 0x00080000 163 164#define VIA_GEC_LASTPIXEL_ON 0x00000000 165#define VIA_GEC_LASTPIXEL_OFF 0x00100000 166#define VIA_GEC_X_MAJOR 0x00000000 167#define VIA_GEC_Y_MAJOR 0x00200000 168#define VIA_GEC_QUICK_START 0x00800000 169 170/* defines for VIA 3D registers */ 171#define VIA_REG_STATUS 0x400 172#define VIA_REG_CR_TRANSET 0x41C 173#define VIA_REG_CR_TRANSPACE 0x420 174#define VIA_REG_TRANSET 0x43C 175#define VIA_REG_TRANSPACE 0x440 176 177/* VIA_REG_STATUS(0x400): Engine Status */ 178 179/* Command Regulator is busy */ 180#define VIA_CMD_RGTR_BUSY 0x00000080 181/* 2D Engine is busy */ 182#define VIA_2D_ENG_BUSY 0x00000002 183/* 3D Engine is busy */ 184#define VIA_3D_ENG_BUSY 0x00000001 185/* Virtual Queue is busy */ 186#define VIA_VR_QUEUE_BUSY 0x00020000 187 188/* VIA_REG_STATUS(0x400): Engine Status for H5 */ 189#define VIA_CMD_RGTR_BUSY_H5 0x00000010 /* Command Regulator is busy */ 190#define VIA_2D_ENG_BUSY_H5 0x00000002 /* 2D Engine is busy */ 191#define VIA_3D_ENG_BUSY_H5 0x00001FE1 /* 3D Engine is busy */ 192#define VIA_VR_QUEUE_BUSY_H5 0x00000004 /* Virtual Queue is busy */ 193 194/* VIA_REG_STATUS(0x400): Engine Status for VT3353/3409 */ 195#define VIA_CMD_RGTR_BUSY_M1 0x00000010 /* Command Regulator is busy */ 196#define VIA_2D_ENG_BUSY_M1 0x00000002 /* 2D Engine is busy */ 197#define VIA_3D_ENG_BUSY_M1 0x00001FE1 /* 3D Engine is busy */ 198#define VIA_VR_QUEUE_BUSY_M1 0x00000004 /* Virtual Queue is busy */ 199 200#define MAXLOOP 0xFFFFFF 201 202#define VIA_BITBLT_COLOR 1 203#define VIA_BITBLT_MONO 2 204#define VIA_BITBLT_FILL 3 205 206int viafb_setup_engine(struct fb_info *info); 207void viafb_reset_engine(struct viafb_par *viapar); 208void viafb_show_hw_cursor(struct fb_info *info, int Status); 209void viafb_wait_engine_idle(struct fb_info *info); 210 211#endif /* __ACCEL_H__ */ 212