linux/net/mac80211/main.c
<<
>>
Prefs
   1/*
   2 * Copyright 2002-2005, Instant802 Networks, Inc.
   3 * Copyright 2005-2006, Devicescape Software, Inc.
   4 * Copyright 2006-2007  Jiri Benc <jbenc@suse.cz>
   5 *
   6 * This program is free software; you can redistribute it and/or modify
   7 * it under the terms of the GNU General Public License version 2 as
   8 * published by the Free Software Foundation.
   9 */
  10
  11#include <net/mac80211.h>
  12#include <linux/module.h>
  13#include <linux/init.h>
  14#include <linux/netdevice.h>
  15#include <linux/types.h>
  16#include <linux/slab.h>
  17#include <linux/skbuff.h>
  18#include <linux/etherdevice.h>
  19#include <linux/if_arp.h>
  20#include <linux/rtnetlink.h>
  21#include <linux/bitmap.h>
  22#include <linux/pm_qos.h>
  23#include <linux/inetdevice.h>
  24#include <net/net_namespace.h>
  25#include <net/cfg80211.h>
  26#include <net/addrconf.h>
  27
  28#include "ieee80211_i.h"
  29#include "driver-ops.h"
  30#include "rate.h"
  31#include "mesh.h"
  32#include "wep.h"
  33#include "led.h"
  34#include "cfg.h"
  35#include "debugfs.h"
  36
  37void ieee80211_configure_filter(struct ieee80211_local *local)
  38{
  39        u64 mc;
  40        unsigned int changed_flags;
  41        unsigned int new_flags = 0;
  42
  43        if (atomic_read(&local->iff_promiscs))
  44                new_flags |= FIF_PROMISC_IN_BSS;
  45
  46        if (atomic_read(&local->iff_allmultis))
  47                new_flags |= FIF_ALLMULTI;
  48
  49        if (local->monitors || test_bit(SCAN_SW_SCANNING, &local->scanning) ||
  50            test_bit(SCAN_ONCHANNEL_SCANNING, &local->scanning))
  51                new_flags |= FIF_BCN_PRBRESP_PROMISC;
  52
  53        if (local->fif_probe_req || local->probe_req_reg)
  54                new_flags |= FIF_PROBE_REQ;
  55
  56        if (local->fif_fcsfail)
  57                new_flags |= FIF_FCSFAIL;
  58
  59        if (local->fif_plcpfail)
  60                new_flags |= FIF_PLCPFAIL;
  61
  62        if (local->fif_control)
  63                new_flags |= FIF_CONTROL;
  64
  65        if (local->fif_other_bss)
  66                new_flags |= FIF_OTHER_BSS;
  67
  68        if (local->fif_pspoll)
  69                new_flags |= FIF_PSPOLL;
  70
  71        spin_lock_bh(&local->filter_lock);
  72        changed_flags = local->filter_flags ^ new_flags;
  73
  74        mc = drv_prepare_multicast(local, &local->mc_list);
  75        spin_unlock_bh(&local->filter_lock);
  76
  77        /* be a bit nasty */
  78        new_flags |= (1<<31);
  79
  80        drv_configure_filter(local, changed_flags, &new_flags, mc);
  81
  82        WARN_ON(new_flags & (1<<31));
  83
  84        local->filter_flags = new_flags & ~(1<<31);
  85}
  86
  87static void ieee80211_reconfig_filter(struct work_struct *work)
  88{
  89        struct ieee80211_local *local =
  90                container_of(work, struct ieee80211_local, reconfig_filter);
  91
  92        ieee80211_configure_filter(local);
  93}
  94
  95static u32 ieee80211_hw_conf_chan(struct ieee80211_local *local)
  96{
  97        struct ieee80211_sub_if_data *sdata;
  98        struct cfg80211_chan_def chandef = {};
  99        u32 changed = 0;
 100        int power;
 101        u32 offchannel_flag;
 102
 103        offchannel_flag = local->hw.conf.flags & IEEE80211_CONF_OFFCHANNEL;
 104
 105        if (local->scan_chandef.chan) {
 106                chandef = local->scan_chandef;
 107        } else if (local->tmp_channel) {
 108                chandef.chan = local->tmp_channel;
 109                chandef.width = NL80211_CHAN_WIDTH_20_NOHT;
 110                chandef.center_freq1 = chandef.chan->center_freq;
 111        } else
 112                chandef = local->_oper_chandef;
 113
 114        WARN(!cfg80211_chandef_valid(&chandef),
 115             "control:%d MHz width:%d center: %d/%d MHz",
 116             chandef.chan->center_freq, chandef.width,
 117             chandef.center_freq1, chandef.center_freq2);
 118
 119        if (!cfg80211_chandef_identical(&chandef, &local->_oper_chandef))
 120                local->hw.conf.flags |= IEEE80211_CONF_OFFCHANNEL;
 121        else
 122                local->hw.conf.flags &= ~IEEE80211_CONF_OFFCHANNEL;
 123
 124        offchannel_flag ^= local->hw.conf.flags & IEEE80211_CONF_OFFCHANNEL;
 125
 126        if (offchannel_flag ||
 127            !cfg80211_chandef_identical(&local->hw.conf.chandef,
 128                                        &local->_oper_chandef)) {
 129                local->hw.conf.chandef = chandef;
 130                changed |= IEEE80211_CONF_CHANGE_CHANNEL;
 131        }
 132
 133        if (!conf_is_ht(&local->hw.conf)) {
 134                /*
 135                 * mac80211.h documents that this is only valid
 136                 * when the channel is set to an HT type, and
 137                 * that otherwise STATIC is used.
 138                 */
 139                local->hw.conf.smps_mode = IEEE80211_SMPS_STATIC;
 140        } else if (local->hw.conf.smps_mode != local->smps_mode) {
 141                local->hw.conf.smps_mode = local->smps_mode;
 142                changed |= IEEE80211_CONF_CHANGE_SMPS;
 143        }
 144
 145        power = ieee80211_chandef_max_power(&chandef);
 146
 147        rcu_read_lock();
 148        list_for_each_entry_rcu(sdata, &local->interfaces, list) {
 149                if (!rcu_access_pointer(sdata->vif.chanctx_conf))
 150                        continue;
 151                power = min(power, sdata->vif.bss_conf.txpower);
 152        }
 153        rcu_read_unlock();
 154
 155        if (local->hw.conf.power_level != power) {
 156                changed |= IEEE80211_CONF_CHANGE_POWER;
 157                local->hw.conf.power_level = power;
 158        }
 159
 160        return changed;
 161}
 162
 163int ieee80211_hw_config(struct ieee80211_local *local, u32 changed)
 164{
 165        int ret = 0;
 166
 167        might_sleep();
 168
 169        if (!local->use_chanctx)
 170                changed |= ieee80211_hw_conf_chan(local);
 171        else
 172                changed &= ~(IEEE80211_CONF_CHANGE_CHANNEL |
 173                             IEEE80211_CONF_CHANGE_POWER);
 174
 175        if (changed && local->open_count) {
 176                ret = drv_config(local, changed);
 177                /*
 178                 * Goal:
 179                 * HW reconfiguration should never fail, the driver has told
 180                 * us what it can support so it should live up to that promise.
 181                 *
 182                 * Current status:
 183                 * rfkill is not integrated with mac80211 and a
 184                 * configuration command can thus fail if hardware rfkill
 185                 * is enabled
 186                 *
 187                 * FIXME: integrate rfkill with mac80211 and then add this
 188                 * WARN_ON() back
 189                 *
 190                 */
 191                /* WARN_ON(ret); */
 192        }
 193
 194        return ret;
 195}
 196
 197void ieee80211_bss_info_change_notify(struct ieee80211_sub_if_data *sdata,
 198                                      u32 changed)
 199{
 200        struct ieee80211_local *local = sdata->local;
 201
 202        if (!changed)
 203                return;
 204
 205        drv_bss_info_changed(local, sdata, &sdata->vif.bss_conf, changed);
 206}
 207
 208u32 ieee80211_reset_erp_info(struct ieee80211_sub_if_data *sdata)
 209{
 210        sdata->vif.bss_conf.use_cts_prot = false;
 211        sdata->vif.bss_conf.use_short_preamble = false;
 212        sdata->vif.bss_conf.use_short_slot = false;
 213        return BSS_CHANGED_ERP_CTS_PROT |
 214               BSS_CHANGED_ERP_PREAMBLE |
 215               BSS_CHANGED_ERP_SLOT;
 216}
 217
 218static void ieee80211_tasklet_handler(unsigned long data)
 219{
 220        struct ieee80211_local *local = (struct ieee80211_local *) data;
 221        struct sk_buff *skb;
 222
 223        while ((skb = skb_dequeue(&local->skb_queue)) ||
 224               (skb = skb_dequeue(&local->skb_queue_unreliable))) {
 225                switch (skb->pkt_type) {
 226                case IEEE80211_RX_MSG:
 227                        /* Clear skb->pkt_type in order to not confuse kernel
 228                         * netstack. */
 229                        skb->pkt_type = 0;
 230                        ieee80211_rx(&local->hw, skb);
 231                        break;
 232                case IEEE80211_TX_STATUS_MSG:
 233                        skb->pkt_type = 0;
 234                        ieee80211_tx_status(&local->hw, skb);
 235                        break;
 236                default:
 237                        WARN(1, "mac80211: Packet is of unknown type %d\n",
 238                             skb->pkt_type);
 239                        dev_kfree_skb(skb);
 240                        break;
 241                }
 242        }
 243}
 244
 245static void ieee80211_restart_work(struct work_struct *work)
 246{
 247        struct ieee80211_local *local =
 248                container_of(work, struct ieee80211_local, restart_work);
 249
 250        /* wait for scan work complete */
 251        flush_workqueue(local->workqueue);
 252
 253        mutex_lock(&local->mtx);
 254        WARN(test_bit(SCAN_HW_SCANNING, &local->scanning) ||
 255             rcu_dereference_protected(local->sched_scan_sdata,
 256                                       lockdep_is_held(&local->mtx)),
 257                "%s called with hardware scan in progress\n", __func__);
 258        mutex_unlock(&local->mtx);
 259
 260        rtnl_lock();
 261        ieee80211_scan_cancel(local);
 262        ieee80211_reconfig(local);
 263        rtnl_unlock();
 264}
 265
 266void ieee80211_restart_hw(struct ieee80211_hw *hw)
 267{
 268        struct ieee80211_local *local = hw_to_local(hw);
 269
 270        trace_api_restart_hw(local);
 271
 272        wiphy_info(hw->wiphy,
 273                   "Hardware restart was requested\n");
 274
 275        /* use this reason, ieee80211_reconfig will unblock it */
 276        ieee80211_stop_queues_by_reason(hw, IEEE80211_MAX_QUEUE_MAP,
 277                                        IEEE80211_QUEUE_STOP_REASON_SUSPEND);
 278
 279        /*
 280         * Stop all Rx during the reconfig. We don't want state changes
 281         * or driver callbacks while this is in progress.
 282         */
 283        local->in_reconfig = true;
 284        barrier();
 285
 286        schedule_work(&local->restart_work);
 287}
 288EXPORT_SYMBOL(ieee80211_restart_hw);
 289
 290#ifdef CONFIG_INET
 291static int ieee80211_ifa_changed(struct notifier_block *nb,
 292                                 unsigned long data, void *arg)
 293{
 294        struct in_ifaddr *ifa = arg;
 295        struct ieee80211_local *local =
 296                container_of(nb, struct ieee80211_local,
 297                             ifa_notifier);
 298        struct net_device *ndev = ifa->ifa_dev->dev;
 299        struct wireless_dev *wdev = ndev->ieee80211_ptr;
 300        struct in_device *idev;
 301        struct ieee80211_sub_if_data *sdata;
 302        struct ieee80211_bss_conf *bss_conf;
 303        struct ieee80211_if_managed *ifmgd;
 304        int c = 0;
 305
 306        /* Make sure it's our interface that got changed */
 307        if (!wdev)
 308                return NOTIFY_DONE;
 309
 310        if (wdev->wiphy != local->hw.wiphy)
 311                return NOTIFY_DONE;
 312
 313        sdata = IEEE80211_DEV_TO_SUB_IF(ndev);
 314        bss_conf = &sdata->vif.bss_conf;
 315
 316        /* ARP filtering is only supported in managed mode */
 317        if (sdata->vif.type != NL80211_IFTYPE_STATION)
 318                return NOTIFY_DONE;
 319
 320        idev = __in_dev_get_rtnl(sdata->dev);
 321        if (!idev)
 322                return NOTIFY_DONE;
 323
 324        ifmgd = &sdata->u.mgd;
 325        sdata_lock(sdata);
 326
 327        /* Copy the addresses to the bss_conf list */
 328        ifa = idev->ifa_list;
 329        while (ifa) {
 330                if (c < IEEE80211_BSS_ARP_ADDR_LIST_LEN)
 331                        bss_conf->arp_addr_list[c] = ifa->ifa_address;
 332                ifa = ifa->ifa_next;
 333                c++;
 334        }
 335
 336        bss_conf->arp_addr_cnt = c;
 337
 338        /* Configure driver only if associated (which also implies it is up) */
 339        if (ifmgd->associated)
 340                ieee80211_bss_info_change_notify(sdata,
 341                                                 BSS_CHANGED_ARP_FILTER);
 342
 343        sdata_unlock(sdata);
 344
 345        return NOTIFY_DONE;
 346}
 347#endif
 348
 349#if IS_ENABLED(CONFIG_IPV6)
 350static int ieee80211_ifa6_changed(struct notifier_block *nb,
 351                                  unsigned long data, void *arg)
 352{
 353        struct inet6_ifaddr *ifa = (struct inet6_ifaddr *)arg;
 354        struct inet6_dev *idev = ifa->idev;
 355        struct net_device *ndev = ifa->idev->dev;
 356        struct ieee80211_local *local =
 357                container_of(nb, struct ieee80211_local, ifa6_notifier);
 358        struct wireless_dev *wdev = ndev->ieee80211_ptr;
 359        struct ieee80211_sub_if_data *sdata;
 360
 361        /* Make sure it's our interface that got changed */
 362        if (!wdev || wdev->wiphy != local->hw.wiphy)
 363                return NOTIFY_DONE;
 364
 365        sdata = IEEE80211_DEV_TO_SUB_IF(ndev);
 366
 367        /*
 368         * For now only support station mode. This is mostly because
 369         * doing AP would have to handle AP_VLAN in some way ...
 370         */
 371        if (sdata->vif.type != NL80211_IFTYPE_STATION)
 372                return NOTIFY_DONE;
 373
 374        drv_ipv6_addr_change(local, sdata, idev);
 375
 376        return NOTIFY_DONE;
 377}
 378#endif
 379
 380/* There isn't a lot of sense in it, but you can transmit anything you like */
 381static const struct ieee80211_txrx_stypes
 382ieee80211_default_mgmt_stypes[NUM_NL80211_IFTYPES] = {
 383        [NL80211_IFTYPE_ADHOC] = {
 384                .tx = 0xffff,
 385                .rx = BIT(IEEE80211_STYPE_ACTION >> 4) |
 386                        BIT(IEEE80211_STYPE_AUTH >> 4) |
 387                        BIT(IEEE80211_STYPE_DEAUTH >> 4) |
 388                        BIT(IEEE80211_STYPE_PROBE_REQ >> 4),
 389        },
 390        [NL80211_IFTYPE_STATION] = {
 391                .tx = 0xffff,
 392                .rx = BIT(IEEE80211_STYPE_ACTION >> 4) |
 393                        BIT(IEEE80211_STYPE_PROBE_REQ >> 4),
 394        },
 395        [NL80211_IFTYPE_AP] = {
 396                .tx = 0xffff,
 397                .rx = BIT(IEEE80211_STYPE_ASSOC_REQ >> 4) |
 398                        BIT(IEEE80211_STYPE_REASSOC_REQ >> 4) |
 399                        BIT(IEEE80211_STYPE_PROBE_REQ >> 4) |
 400                        BIT(IEEE80211_STYPE_DISASSOC >> 4) |
 401                        BIT(IEEE80211_STYPE_AUTH >> 4) |
 402                        BIT(IEEE80211_STYPE_DEAUTH >> 4) |
 403                        BIT(IEEE80211_STYPE_ACTION >> 4),
 404        },
 405        [NL80211_IFTYPE_AP_VLAN] = {
 406                /* copy AP */
 407                .tx = 0xffff,
 408                .rx = BIT(IEEE80211_STYPE_ASSOC_REQ >> 4) |
 409                        BIT(IEEE80211_STYPE_REASSOC_REQ >> 4) |
 410                        BIT(IEEE80211_STYPE_PROBE_REQ >> 4) |
 411                        BIT(IEEE80211_STYPE_DISASSOC >> 4) |
 412                        BIT(IEEE80211_STYPE_AUTH >> 4) |
 413                        BIT(IEEE80211_STYPE_DEAUTH >> 4) |
 414                        BIT(IEEE80211_STYPE_ACTION >> 4),
 415        },
 416        [NL80211_IFTYPE_P2P_CLIENT] = {
 417                .tx = 0xffff,
 418                .rx = BIT(IEEE80211_STYPE_ACTION >> 4) |
 419                        BIT(IEEE80211_STYPE_PROBE_REQ >> 4),
 420        },
 421        [NL80211_IFTYPE_P2P_GO] = {
 422                .tx = 0xffff,
 423                .rx = BIT(IEEE80211_STYPE_ASSOC_REQ >> 4) |
 424                        BIT(IEEE80211_STYPE_REASSOC_REQ >> 4) |
 425                        BIT(IEEE80211_STYPE_PROBE_REQ >> 4) |
 426                        BIT(IEEE80211_STYPE_DISASSOC >> 4) |
 427                        BIT(IEEE80211_STYPE_AUTH >> 4) |
 428                        BIT(IEEE80211_STYPE_DEAUTH >> 4) |
 429                        BIT(IEEE80211_STYPE_ACTION >> 4),
 430        },
 431        [NL80211_IFTYPE_MESH_POINT] = {
 432                .tx = 0xffff,
 433                .rx = BIT(IEEE80211_STYPE_ACTION >> 4) |
 434                        BIT(IEEE80211_STYPE_AUTH >> 4) |
 435                        BIT(IEEE80211_STYPE_DEAUTH >> 4),
 436        },
 437        [NL80211_IFTYPE_P2P_DEVICE] = {
 438                .tx = 0xffff,
 439                .rx = BIT(IEEE80211_STYPE_ACTION >> 4) |
 440                        BIT(IEEE80211_STYPE_PROBE_REQ >> 4),
 441        },
 442};
 443
 444static const struct ieee80211_ht_cap mac80211_ht_capa_mod_mask = {
 445        .ampdu_params_info = IEEE80211_HT_AMPDU_PARM_FACTOR |
 446                             IEEE80211_HT_AMPDU_PARM_DENSITY,
 447
 448        .cap_info = cpu_to_le16(IEEE80211_HT_CAP_SUP_WIDTH_20_40 |
 449                                IEEE80211_HT_CAP_MAX_AMSDU |
 450                                IEEE80211_HT_CAP_SGI_20 |
 451                                IEEE80211_HT_CAP_SGI_40),
 452        .mcs = {
 453                .rx_mask = { 0xff, 0xff, 0xff, 0xff, 0xff,
 454                             0xff, 0xff, 0xff, 0xff, 0xff, },
 455        },
 456};
 457
 458static const struct ieee80211_vht_cap mac80211_vht_capa_mod_mask = {
 459        .vht_cap_info =
 460                cpu_to_le32(IEEE80211_VHT_CAP_RXLDPC |
 461                            IEEE80211_VHT_CAP_SHORT_GI_80 |
 462                            IEEE80211_VHT_CAP_SHORT_GI_160 |
 463                            IEEE80211_VHT_CAP_RXSTBC_1 |
 464                            IEEE80211_VHT_CAP_RXSTBC_2 |
 465                            IEEE80211_VHT_CAP_RXSTBC_3 |
 466                            IEEE80211_VHT_CAP_RXSTBC_4 |
 467                            IEEE80211_VHT_CAP_TXSTBC |
 468                            IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE |
 469                            IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE |
 470                            IEEE80211_VHT_CAP_TX_ANTENNA_PATTERN |
 471                            IEEE80211_VHT_CAP_RX_ANTENNA_PATTERN |
 472                            IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK),
 473        .supp_mcs = {
 474                .rx_mcs_map = cpu_to_le16(~0),
 475                .tx_mcs_map = cpu_to_le16(~0),
 476        },
 477};
 478
 479static const u8 extended_capabilities[] = {
 480        0, 0, 0, 0, 0, 0, 0,
 481        WLAN_EXT_CAPA8_OPMODE_NOTIF,
 482};
 483
 484struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len,
 485                                        const struct ieee80211_ops *ops)
 486{
 487        struct ieee80211_local *local;
 488        int priv_size, i;
 489        struct wiphy *wiphy;
 490        bool use_chanctx;
 491
 492        if (WARN_ON(!ops->tx || !ops->start || !ops->stop || !ops->config ||
 493                    !ops->add_interface || !ops->remove_interface ||
 494                    !ops->configure_filter))
 495                return NULL;
 496
 497        if (WARN_ON(ops->sta_state && (ops->sta_add || ops->sta_remove)))
 498                return NULL;
 499
 500        /* check all or no channel context operations exist */
 501        i = !!ops->add_chanctx + !!ops->remove_chanctx +
 502            !!ops->change_chanctx + !!ops->assign_vif_chanctx +
 503            !!ops->unassign_vif_chanctx;
 504        if (WARN_ON(i != 0 && i != 5))
 505                return NULL;
 506        use_chanctx = i == 5;
 507
 508        /* Ensure 32-byte alignment of our private data and hw private data.
 509         * We use the wiphy priv data for both our ieee80211_local and for
 510         * the driver's private data
 511         *
 512         * In memory it'll be like this:
 513         *
 514         * +-------------------------+
 515         * | struct wiphy           |
 516         * +-------------------------+
 517         * | struct ieee80211_local  |
 518         * +-------------------------+
 519         * | driver's private data   |
 520         * +-------------------------+
 521         *
 522         */
 523        priv_size = ALIGN(sizeof(*local), NETDEV_ALIGN) + priv_data_len;
 524
 525        wiphy = wiphy_new(&mac80211_config_ops, priv_size);
 526
 527        if (!wiphy)
 528                return NULL;
 529
 530        wiphy->mgmt_stypes = ieee80211_default_mgmt_stypes;
 531
 532        wiphy->privid = mac80211_wiphy_privid;
 533
 534        wiphy->flags |= WIPHY_FLAG_NETNS_OK |
 535                        WIPHY_FLAG_4ADDR_AP |
 536                        WIPHY_FLAG_4ADDR_STATION |
 537                        WIPHY_FLAG_REPORTS_OBSS |
 538                        WIPHY_FLAG_OFFCHAN_TX;
 539
 540        wiphy->extended_capabilities = extended_capabilities;
 541        wiphy->extended_capabilities_mask = extended_capabilities;
 542        wiphy->extended_capabilities_len = ARRAY_SIZE(extended_capabilities);
 543
 544        if (ops->remain_on_channel)
 545                wiphy->flags |= WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL;
 546
 547        wiphy->features |= NL80211_FEATURE_SK_TX_STATUS |
 548                           NL80211_FEATURE_SAE |
 549                           NL80211_FEATURE_HT_IBSS |
 550                           NL80211_FEATURE_VIF_TXPOWER |
 551                           NL80211_FEATURE_USERSPACE_MPM;
 552
 553        if (!ops->hw_scan)
 554                wiphy->features |= NL80211_FEATURE_LOW_PRIORITY_SCAN |
 555                                   NL80211_FEATURE_AP_SCAN;
 556
 557
 558        if (!ops->set_key)
 559                wiphy->flags |= WIPHY_FLAG_IBSS_RSN;
 560
 561        wiphy->bss_priv_size = sizeof(struct ieee80211_bss);
 562
 563        local = wiphy_priv(wiphy);
 564
 565        local->hw.wiphy = wiphy;
 566
 567        local->hw.priv = (char *)local + ALIGN(sizeof(*local), NETDEV_ALIGN);
 568
 569        local->ops = ops;
 570        local->use_chanctx = use_chanctx;
 571
 572        /* set up some defaults */
 573        local->hw.queues = 1;
 574        local->hw.max_rates = 1;
 575        local->hw.max_report_rates = 0;
 576        local->hw.max_rx_aggregation_subframes = IEEE80211_MAX_AMPDU_BUF;
 577        local->hw.max_tx_aggregation_subframes = IEEE80211_MAX_AMPDU_BUF;
 578        local->hw.offchannel_tx_hw_queue = IEEE80211_INVAL_HW_QUEUE;
 579        local->hw.conf.long_frame_max_tx_count = wiphy->retry_long;
 580        local->hw.conf.short_frame_max_tx_count = wiphy->retry_short;
 581        local->hw.radiotap_mcs_details = IEEE80211_RADIOTAP_MCS_HAVE_MCS |
 582                                         IEEE80211_RADIOTAP_MCS_HAVE_GI |
 583                                         IEEE80211_RADIOTAP_MCS_HAVE_BW;
 584        local->hw.radiotap_vht_details = IEEE80211_RADIOTAP_VHT_KNOWN_GI |
 585                                         IEEE80211_RADIOTAP_VHT_KNOWN_BANDWIDTH;
 586        local->hw.uapsd_queues = IEEE80211_DEFAULT_UAPSD_QUEUES;
 587        local->hw.uapsd_max_sp_len = IEEE80211_DEFAULT_MAX_SP_LEN;
 588        local->user_power_level = IEEE80211_UNSET_POWER_LEVEL;
 589        wiphy->ht_capa_mod_mask = &mac80211_ht_capa_mod_mask;
 590        wiphy->vht_capa_mod_mask = &mac80211_vht_capa_mod_mask;
 591
 592        INIT_LIST_HEAD(&local->interfaces);
 593
 594        __hw_addr_init(&local->mc_list);
 595
 596        mutex_init(&local->iflist_mtx);
 597        mutex_init(&local->mtx);
 598
 599        mutex_init(&local->key_mtx);
 600        spin_lock_init(&local->filter_lock);
 601        spin_lock_init(&local->rx_path_lock);
 602        spin_lock_init(&local->queue_stop_reason_lock);
 603
 604        INIT_LIST_HEAD(&local->chanctx_list);
 605        mutex_init(&local->chanctx_mtx);
 606
 607        INIT_DELAYED_WORK(&local->scan_work, ieee80211_scan_work);
 608
 609        INIT_WORK(&local->restart_work, ieee80211_restart_work);
 610
 611        INIT_WORK(&local->radar_detected_work,
 612                  ieee80211_dfs_radar_detected_work);
 613
 614        INIT_WORK(&local->reconfig_filter, ieee80211_reconfig_filter);
 615        local->smps_mode = IEEE80211_SMPS_OFF;
 616
 617        INIT_WORK(&local->dynamic_ps_enable_work,
 618                  ieee80211_dynamic_ps_enable_work);
 619        INIT_WORK(&local->dynamic_ps_disable_work,
 620                  ieee80211_dynamic_ps_disable_work);
 621        setup_timer(&local->dynamic_ps_timer,
 622                    ieee80211_dynamic_ps_timer, (unsigned long) local);
 623
 624        INIT_WORK(&local->sched_scan_stopped_work,
 625                  ieee80211_sched_scan_stopped_work);
 626
 627        spin_lock_init(&local->ack_status_lock);
 628        idr_init(&local->ack_status_frames);
 629
 630        sta_info_init(local);
 631
 632        for (i = 0; i < IEEE80211_MAX_QUEUES; i++) {
 633                skb_queue_head_init(&local->pending[i]);
 634                atomic_set(&local->agg_queue_stop[i], 0);
 635        }
 636        tasklet_init(&local->tx_pending_tasklet, ieee80211_tx_pending,
 637                     (unsigned long)local);
 638
 639        tasklet_init(&local->tasklet,
 640                     ieee80211_tasklet_handler,
 641                     (unsigned long) local);
 642
 643        skb_queue_head_init(&local->skb_queue);
 644        skb_queue_head_init(&local->skb_queue_unreliable);
 645
 646        ieee80211_led_names(local);
 647
 648        ieee80211_roc_setup(local);
 649
 650        return &local->hw;
 651}
 652EXPORT_SYMBOL(ieee80211_alloc_hw);
 653
 654int ieee80211_register_hw(struct ieee80211_hw *hw)
 655{
 656        struct ieee80211_local *local = hw_to_local(hw);
 657        int result, i;
 658        enum ieee80211_band band;
 659        int channels, max_bitrates;
 660        bool supp_ht, supp_vht;
 661        netdev_features_t feature_whitelist;
 662        struct cfg80211_chan_def dflt_chandef = {};
 663        static const u32 cipher_suites[] = {
 664                /* keep WEP first, it may be removed below */
 665                WLAN_CIPHER_SUITE_WEP40,
 666                WLAN_CIPHER_SUITE_WEP104,
 667                WLAN_CIPHER_SUITE_TKIP,
 668                WLAN_CIPHER_SUITE_CCMP,
 669
 670                /* keep last -- depends on hw flags! */
 671                WLAN_CIPHER_SUITE_AES_CMAC
 672        };
 673
 674        if (hw->flags & IEEE80211_HW_QUEUE_CONTROL &&
 675            (local->hw.offchannel_tx_hw_queue == IEEE80211_INVAL_HW_QUEUE ||
 676             local->hw.offchannel_tx_hw_queue >= local->hw.queues))
 677                return -EINVAL;
 678
 679#ifdef CONFIG_PM
 680        if (hw->wiphy->wowlan && (!local->ops->suspend || !local->ops->resume))
 681                return -EINVAL;
 682#endif
 683
 684        if (!local->use_chanctx) {
 685                for (i = 0; i < local->hw.wiphy->n_iface_combinations; i++) {
 686                        const struct ieee80211_iface_combination *comb;
 687
 688                        comb = &local->hw.wiphy->iface_combinations[i];
 689
 690                        if (comb->num_different_channels > 1)
 691                                return -EINVAL;
 692                }
 693        } else {
 694                /*
 695                 * WDS is currently prohibited when channel contexts are used
 696                 * because there's no clear definition of which channel WDS
 697                 * type interfaces use
 698                 */
 699                if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_WDS))
 700                        return -EINVAL;
 701
 702                /* DFS currently not supported with channel context drivers */
 703                for (i = 0; i < local->hw.wiphy->n_iface_combinations; i++) {
 704                        const struct ieee80211_iface_combination *comb;
 705
 706                        comb = &local->hw.wiphy->iface_combinations[i];
 707
 708                        if (comb->radar_detect_widths)
 709                                return -EINVAL;
 710                }
 711        }
 712
 713        /* Only HW csum features are currently compatible with mac80211 */
 714        feature_whitelist = NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
 715                            NETIF_F_HW_CSUM;
 716        if (WARN_ON(hw->netdev_features & ~feature_whitelist))
 717                return -EINVAL;
 718
 719        if (hw->max_report_rates == 0)
 720                hw->max_report_rates = hw->max_rates;
 721
 722        local->rx_chains = 1;
 723
 724        /*
 725         * generic code guarantees at least one band,
 726         * set this very early because much code assumes
 727         * that hw.conf.channel is assigned
 728         */
 729        channels = 0;
 730        max_bitrates = 0;
 731        supp_ht = false;
 732        supp_vht = false;
 733        for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
 734                struct ieee80211_supported_band *sband;
 735
 736                sband = local->hw.wiphy->bands[band];
 737                if (!sband)
 738                        continue;
 739
 740                if (!dflt_chandef.chan) {
 741                        cfg80211_chandef_create(&dflt_chandef,
 742                                                &sband->channels[0],
 743                                                NL80211_CHAN_NO_HT);
 744                        /* init channel we're on */
 745                        if (!local->use_chanctx && !local->_oper_chandef.chan) {
 746                                local->hw.conf.chandef = dflt_chandef;
 747                                local->_oper_chandef = dflt_chandef;
 748                        }
 749                        local->monitor_chandef = dflt_chandef;
 750                }
 751
 752                channels += sband->n_channels;
 753
 754                if (max_bitrates < sband->n_bitrates)
 755                        max_bitrates = sband->n_bitrates;
 756                supp_ht = supp_ht || sband->ht_cap.ht_supported;
 757                supp_vht = supp_vht || sband->vht_cap.vht_supported;
 758
 759                if (sband->ht_cap.ht_supported)
 760                        local->rx_chains =
 761                                max(ieee80211_mcs_to_chains(&sband->ht_cap.mcs),
 762                                    local->rx_chains);
 763
 764                /* TODO: consider VHT for RX chains, hopefully it's the same */
 765        }
 766
 767        local->int_scan_req = kzalloc(sizeof(*local->int_scan_req) +
 768                                      sizeof(void *) * channels, GFP_KERNEL);
 769        if (!local->int_scan_req)
 770                return -ENOMEM;
 771
 772        for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
 773                if (!local->hw.wiphy->bands[band])
 774                        continue;
 775                local->int_scan_req->rates[band] = (u32) -1;
 776        }
 777
 778        /* if low-level driver supports AP, we also support VLAN */
 779        if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_AP)) {
 780                hw->wiphy->interface_modes |= BIT(NL80211_IFTYPE_AP_VLAN);
 781                hw->wiphy->software_iftypes |= BIT(NL80211_IFTYPE_AP_VLAN);
 782        }
 783
 784        /* mac80211 always supports monitor */
 785        hw->wiphy->interface_modes |= BIT(NL80211_IFTYPE_MONITOR);
 786        hw->wiphy->software_iftypes |= BIT(NL80211_IFTYPE_MONITOR);
 787
 788        /* mac80211 doesn't support more than one IBSS interface right now */
 789        for (i = 0; i < hw->wiphy->n_iface_combinations; i++) {
 790                const struct ieee80211_iface_combination *c;
 791                int j;
 792
 793                c = &hw->wiphy->iface_combinations[i];
 794
 795                for (j = 0; j < c->n_limits; j++)
 796                        if ((c->limits[j].types & BIT(NL80211_IFTYPE_ADHOC)) &&
 797                            c->limits[j].max > 1)
 798                                return -EINVAL;
 799        }
 800
 801#ifndef CONFIG_MAC80211_MESH
 802        /* mesh depends on Kconfig, but drivers should set it if they want */
 803        local->hw.wiphy->interface_modes &= ~BIT(NL80211_IFTYPE_MESH_POINT);
 804#endif
 805
 806        /* if the underlying driver supports mesh, mac80211 will (at least)
 807         * provide routing of mesh authentication frames to userspace */
 808        if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_MESH_POINT))
 809                local->hw.wiphy->flags |= WIPHY_FLAG_MESH_AUTH;
 810
 811        /* mac80211 supports control port protocol changing */
 812        local->hw.wiphy->flags |= WIPHY_FLAG_CONTROL_PORT_PROTOCOL;
 813
 814        if (local->hw.flags & IEEE80211_HW_SIGNAL_DBM)
 815                local->hw.wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM;
 816        else if (local->hw.flags & IEEE80211_HW_SIGNAL_UNSPEC)
 817                local->hw.wiphy->signal_type = CFG80211_SIGNAL_TYPE_UNSPEC;
 818
 819        WARN((local->hw.flags & IEEE80211_HW_SUPPORTS_UAPSD)
 820             && (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK),
 821             "U-APSD not supported with HW_PS_NULLFUNC_STACK\n");
 822
 823        /*
 824         * Calculate scan IE length -- we need this to alloc
 825         * memory and to subtract from the driver limit. It
 826         * includes the DS Params, (extended) supported rates, and HT
 827         * information -- SSID is the driver's responsibility.
 828         */
 829        local->scan_ies_len = 4 + max_bitrates /* (ext) supp rates */ +
 830                3 /* DS Params */;
 831        if (supp_ht)
 832                local->scan_ies_len += 2 + sizeof(struct ieee80211_ht_cap);
 833
 834        if (supp_vht)
 835                local->scan_ies_len +=
 836                        2 + sizeof(struct ieee80211_vht_cap);
 837
 838        if (!local->ops->hw_scan) {
 839                /* For hw_scan, driver needs to set these up. */
 840                local->hw.wiphy->max_scan_ssids = 4;
 841                local->hw.wiphy->max_scan_ie_len = IEEE80211_MAX_DATA_LEN;
 842        }
 843
 844        /*
 845         * If the driver supports any scan IEs, then assume the
 846         * limit includes the IEs mac80211 will add, otherwise
 847         * leave it at zero and let the driver sort it out; we
 848         * still pass our IEs to the driver but userspace will
 849         * not be allowed to in that case.
 850         */
 851        if (local->hw.wiphy->max_scan_ie_len)
 852                local->hw.wiphy->max_scan_ie_len -= local->scan_ies_len;
 853
 854        /* Set up cipher suites unless driver already did */
 855        if (!local->hw.wiphy->cipher_suites) {
 856                local->hw.wiphy->cipher_suites = cipher_suites;
 857                local->hw.wiphy->n_cipher_suites = ARRAY_SIZE(cipher_suites);
 858                if (!(local->hw.flags & IEEE80211_HW_MFP_CAPABLE))
 859                        local->hw.wiphy->n_cipher_suites--;
 860        }
 861        if (IS_ERR(local->wep_tx_tfm) || IS_ERR(local->wep_rx_tfm)) {
 862                if (local->hw.wiphy->cipher_suites == cipher_suites) {
 863                        local->hw.wiphy->cipher_suites += 2;
 864                        local->hw.wiphy->n_cipher_suites -= 2;
 865                } else {
 866                        u32 *suites;
 867                        int r, w = 0;
 868
 869                        /* Filter out WEP */
 870
 871                        suites = kmemdup(
 872                                local->hw.wiphy->cipher_suites,
 873                                sizeof(u32) * local->hw.wiphy->n_cipher_suites,
 874                                GFP_KERNEL);
 875                        if (!suites) {
 876                                result = -ENOMEM;
 877                                goto fail_wiphy_register;
 878                        }
 879                        for (r = 0; r < local->hw.wiphy->n_cipher_suites; r++) {
 880                                u32 suite = local->hw.wiphy->cipher_suites[r];
 881                                if (suite == WLAN_CIPHER_SUITE_WEP40 ||
 882                                    suite == WLAN_CIPHER_SUITE_WEP104)
 883                                        continue;
 884                                suites[w++] = suite;
 885                        }
 886                        local->hw.wiphy->cipher_suites = suites;
 887                        local->hw.wiphy->n_cipher_suites = w;
 888                        local->wiphy_ciphers_allocated = true;
 889                }
 890        }
 891
 892        if (!local->ops->remain_on_channel)
 893                local->hw.wiphy->max_remain_on_channel_duration = 5000;
 894
 895        /* mac80211 based drivers don't support internal TDLS setup */
 896        if (local->hw.wiphy->flags & WIPHY_FLAG_SUPPORTS_TDLS)
 897                local->hw.wiphy->flags |= WIPHY_FLAG_TDLS_EXTERNAL_SETUP;
 898
 899        result = wiphy_register(local->hw.wiphy);
 900        if (result < 0)
 901                goto fail_wiphy_register;
 902
 903        /*
 904         * We use the number of queues for feature tests (QoS, HT) internally
 905         * so restrict them appropriately.
 906         */
 907        if (hw->queues > IEEE80211_MAX_QUEUES)
 908                hw->queues = IEEE80211_MAX_QUEUES;
 909
 910        local->workqueue =
 911                alloc_ordered_workqueue("%s", 0, wiphy_name(local->hw.wiphy));
 912        if (!local->workqueue) {
 913                result = -ENOMEM;
 914                goto fail_workqueue;
 915        }
 916
 917        /*
 918         * The hardware needs headroom for sending the frame,
 919         * and we need some headroom for passing the frame to monitor
 920         * interfaces, but never both at the same time.
 921         */
 922        local->tx_headroom = max_t(unsigned int , local->hw.extra_tx_headroom,
 923                                   IEEE80211_TX_STATUS_HEADROOM);
 924
 925        debugfs_hw_add(local);
 926
 927        /*
 928         * if the driver doesn't specify a max listen interval we
 929         * use 5 which should be a safe default
 930         */
 931        if (local->hw.max_listen_interval == 0)
 932                local->hw.max_listen_interval = 5;
 933
 934        local->hw.conf.listen_interval = local->hw.max_listen_interval;
 935
 936        local->dynamic_ps_forced_timeout = -1;
 937
 938        result = ieee80211_wep_init(local);
 939        if (result < 0)
 940                wiphy_debug(local->hw.wiphy, "Failed to initialize wep: %d\n",
 941                            result);
 942
 943        ieee80211_led_init(local);
 944
 945        rtnl_lock();
 946
 947        result = ieee80211_init_rate_ctrl_alg(local,
 948                                              hw->rate_control_algorithm);
 949        if (result < 0) {
 950                wiphy_debug(local->hw.wiphy,
 951                            "Failed to initialize rate control algorithm\n");
 952                goto fail_rate;
 953        }
 954
 955        /* add one default STA interface if supported */
 956        if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_STATION)) {
 957                result = ieee80211_if_add(local, "wlan%d", NULL,
 958                                          NL80211_IFTYPE_STATION, NULL);
 959                if (result)
 960                        wiphy_warn(local->hw.wiphy,
 961                                   "Failed to add default virtual iface\n");
 962        }
 963
 964        rtnl_unlock();
 965
 966        local->network_latency_notifier.notifier_call =
 967                ieee80211_max_network_latency;
 968        result = pm_qos_add_notifier(PM_QOS_NETWORK_LATENCY,
 969                                     &local->network_latency_notifier);
 970        if (result) {
 971                rtnl_lock();
 972                goto fail_pm_qos;
 973        }
 974
 975#ifdef CONFIG_INET
 976        local->ifa_notifier.notifier_call = ieee80211_ifa_changed;
 977        result = register_inetaddr_notifier(&local->ifa_notifier);
 978        if (result)
 979                goto fail_ifa;
 980#endif
 981
 982#if IS_ENABLED(CONFIG_IPV6)
 983        local->ifa6_notifier.notifier_call = ieee80211_ifa6_changed;
 984        result = register_inet6addr_notifier(&local->ifa6_notifier);
 985        if (result)
 986                goto fail_ifa6;
 987#endif
 988
 989        return 0;
 990
 991#if IS_ENABLED(CONFIG_IPV6)
 992 fail_ifa6:
 993#ifdef CONFIG_INET
 994        unregister_inetaddr_notifier(&local->ifa_notifier);
 995#endif
 996#endif
 997#if defined(CONFIG_INET) || defined(CONFIG_IPV6)
 998 fail_ifa:
 999        pm_qos_remove_notifier(PM_QOS_NETWORK_LATENCY,
1000                               &local->network_latency_notifier);
1001        rtnl_lock();
1002#endif
1003 fail_pm_qos:
1004        ieee80211_led_exit(local);
1005        ieee80211_remove_interfaces(local);
1006 fail_rate:
1007        rtnl_unlock();
1008        ieee80211_wep_free(local);
1009        sta_info_stop(local);
1010        destroy_workqueue(local->workqueue);
1011 fail_workqueue:
1012        wiphy_unregister(local->hw.wiphy);
1013 fail_wiphy_register:
1014        if (local->wiphy_ciphers_allocated)
1015                kfree(local->hw.wiphy->cipher_suites);
1016        kfree(local->int_scan_req);
1017        return result;
1018}
1019EXPORT_SYMBOL(ieee80211_register_hw);
1020
1021void ieee80211_unregister_hw(struct ieee80211_hw *hw)
1022{
1023        struct ieee80211_local *local = hw_to_local(hw);
1024
1025        tasklet_kill(&local->tx_pending_tasklet);
1026        tasklet_kill(&local->tasklet);
1027
1028        pm_qos_remove_notifier(PM_QOS_NETWORK_LATENCY,
1029                               &local->network_latency_notifier);
1030#ifdef CONFIG_INET
1031        unregister_inetaddr_notifier(&local->ifa_notifier);
1032#endif
1033#if IS_ENABLED(CONFIG_IPV6)
1034        unregister_inet6addr_notifier(&local->ifa6_notifier);
1035#endif
1036
1037        rtnl_lock();
1038
1039        /*
1040         * At this point, interface list manipulations are fine
1041         * because the driver cannot be handing us frames any
1042         * more and the tasklet is killed.
1043         */
1044        ieee80211_remove_interfaces(local);
1045
1046        rtnl_unlock();
1047
1048        cancel_work_sync(&local->restart_work);
1049        cancel_work_sync(&local->reconfig_filter);
1050
1051        ieee80211_clear_tx_pending(local);
1052        rate_control_deinitialize(local);
1053
1054        if (skb_queue_len(&local->skb_queue) ||
1055            skb_queue_len(&local->skb_queue_unreliable))
1056                wiphy_warn(local->hw.wiphy, "skb_queue not empty\n");
1057        skb_queue_purge(&local->skb_queue);
1058        skb_queue_purge(&local->skb_queue_unreliable);
1059
1060        destroy_workqueue(local->workqueue);
1061        wiphy_unregister(local->hw.wiphy);
1062        sta_info_stop(local);
1063        ieee80211_wep_free(local);
1064        ieee80211_led_exit(local);
1065        kfree(local->int_scan_req);
1066}
1067EXPORT_SYMBOL(ieee80211_unregister_hw);
1068
1069static int ieee80211_free_ack_frame(int id, void *p, void *data)
1070{
1071        WARN_ONCE(1, "Have pending ack frames!\n");
1072        kfree_skb(p);
1073        return 0;
1074}
1075
1076void ieee80211_free_hw(struct ieee80211_hw *hw)
1077{
1078        struct ieee80211_local *local = hw_to_local(hw);
1079
1080        mutex_destroy(&local->iflist_mtx);
1081        mutex_destroy(&local->mtx);
1082
1083        if (local->wiphy_ciphers_allocated)
1084                kfree(local->hw.wiphy->cipher_suites);
1085
1086        idr_for_each(&local->ack_status_frames,
1087                     ieee80211_free_ack_frame, NULL);
1088        idr_destroy(&local->ack_status_frames);
1089
1090        wiphy_free(local->hw.wiphy);
1091}
1092EXPORT_SYMBOL(ieee80211_free_hw);
1093
1094static int __init ieee80211_init(void)
1095{
1096        struct sk_buff *skb;
1097        int ret;
1098
1099        BUILD_BUG_ON(sizeof(struct ieee80211_tx_info) > sizeof(skb->cb));
1100        BUILD_BUG_ON(offsetof(struct ieee80211_tx_info, driver_data) +
1101                     IEEE80211_TX_INFO_DRIVER_DATA_SIZE > sizeof(skb->cb));
1102
1103        ret = rc80211_minstrel_init();
1104        if (ret)
1105                return ret;
1106
1107        ret = rc80211_minstrel_ht_init();
1108        if (ret)
1109                goto err_minstrel;
1110
1111        ret = rc80211_pid_init();
1112        if (ret)
1113                goto err_pid;
1114
1115        ret = ieee80211_iface_init();
1116        if (ret)
1117                goto err_netdev;
1118
1119        return 0;
1120 err_netdev:
1121        rc80211_pid_exit();
1122 err_pid:
1123        rc80211_minstrel_ht_exit();
1124 err_minstrel:
1125        rc80211_minstrel_exit();
1126
1127        return ret;
1128}
1129
1130static void __exit ieee80211_exit(void)
1131{
1132        rc80211_pid_exit();
1133        rc80211_minstrel_ht_exit();
1134        rc80211_minstrel_exit();
1135
1136        ieee80211s_stop();
1137
1138        ieee80211_iface_exit();
1139
1140        rcu_barrier();
1141}
1142
1143
1144subsys_initcall(ieee80211_init);
1145module_exit(ieee80211_exit);
1146
1147MODULE_DESCRIPTION("IEEE 802.11 subsystem");
1148MODULE_LICENSE("GPL");
1149