1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20#include <linux/i2c.h>
21#include <linux/platform_data/at24.h>
22#include <linux/io.h>
23#include <linux/mtd/plat-ram.h>
24#include <linux/mtd/physmap.h>
25#include <linux/platform_device.h>
26#include <linux/regulator/machine.h>
27#include <linux/mfd/mc13783.h>
28#include <linux/spi/spi.h>
29#include <linux/irq.h>
30#include <linux/gpio.h>
31
32#include <asm/mach-types.h>
33#include <asm/mach/arch.h>
34#include <asm/mach/time.h>
35
36#include "board-pcm038.h"
37#include "common.h"
38#include "devices-imx27.h"
39#include "hardware.h"
40#include "iomux-mx27.h"
41#include "ulpi.h"
42
43static const int pcm038_pins[] __initconst = {
44
45 PE12_PF_UART1_TXD,
46 PE13_PF_UART1_RXD,
47 PE14_PF_UART1_CTS,
48 PE15_PF_UART1_RTS,
49
50 PE3_PF_UART2_CTS,
51 PE4_PF_UART2_RTS,
52 PE6_PF_UART2_TXD,
53 PE7_PF_UART2_RXD,
54
55 PE8_PF_UART3_TXD,
56 PE9_PF_UART3_RXD,
57 PE10_PF_UART3_CTS,
58 PE11_PF_UART3_RTS,
59
60 PD0_AIN_FEC_TXD0,
61 PD1_AIN_FEC_TXD1,
62 PD2_AIN_FEC_TXD2,
63 PD3_AIN_FEC_TXD3,
64 PD4_AOUT_FEC_RX_ER,
65 PD5_AOUT_FEC_RXD1,
66 PD6_AOUT_FEC_RXD2,
67 PD7_AOUT_FEC_RXD3,
68 PD8_AF_FEC_MDIO,
69 PD9_AIN_FEC_MDC,
70 PD10_AOUT_FEC_CRS,
71 PD11_AOUT_FEC_TX_CLK,
72 PD12_AOUT_FEC_RXD0,
73 PD13_AOUT_FEC_RX_DV,
74 PD14_AOUT_FEC_RX_CLK,
75 PD15_AOUT_FEC_COL,
76 PD16_AIN_FEC_TX_ER,
77 PF23_AIN_FEC_TX_EN,
78
79 PC5_PF_I2C2_SDA,
80 PC6_PF_I2C2_SCL,
81
82 PD25_PF_CSPI1_RDY,
83 PD29_PF_CSPI1_SCLK,
84 PD30_PF_CSPI1_MISO,
85 PD31_PF_CSPI1_MOSI,
86
87 PC20_PF_SSI1_FS,
88 PC21_PF_SSI1_RXD,
89 PC22_PF_SSI1_TXD,
90 PC23_PF_SSI1_CLK,
91
92 PC16_PF_SSI4_FS,
93 PC17_PF_SSI4_RXD,
94 PC18_PF_SSI4_TXD,
95 PC19_PF_SSI4_CLK,
96
97 PA0_PF_USBH2_CLK,
98 PA1_PF_USBH2_DIR,
99 PA2_PF_USBH2_DATA7,
100 PA3_PF_USBH2_NXT,
101 PA4_PF_USBH2_STP,
102 PD19_AF_USBH2_DATA4,
103 PD20_AF_USBH2_DATA3,
104 PD21_AF_USBH2_DATA6,
105 PD22_AF_USBH2_DATA0,
106 PD23_AF_USBH2_DATA2,
107 PD24_AF_USBH2_DATA1,
108 PD26_AF_USBH2_DATA5,
109};
110
111
112
113
114
115
116static struct platdata_mtd_ram pcm038_sram_data = {
117 .bankwidth = 2,
118};
119
120static struct resource pcm038_sram_resource = {
121 .start = MX27_CS1_BASE_ADDR,
122 .end = MX27_CS1_BASE_ADDR + 512 * 1024 - 1,
123 .flags = IORESOURCE_MEM,
124};
125
126static struct platform_device pcm038_sram_mtd_device = {
127 .name = "mtd-ram",
128 .id = 0,
129 .dev = {
130 .platform_data = &pcm038_sram_data,
131 },
132 .num_resources = 1,
133 .resource = &pcm038_sram_resource,
134};
135
136
137
138
139
140static struct physmap_flash_data pcm038_flash_data = {
141 .width = 2,
142};
143
144static struct resource pcm038_flash_resource = {
145 .start = 0xc0000000,
146 .end = 0xc1ffffff,
147 .flags = IORESOURCE_MEM,
148};
149
150static struct platform_device pcm038_nor_mtd_device = {
151 .name = "physmap-flash",
152 .id = 0,
153 .dev = {
154 .platform_data = &pcm038_flash_data,
155 },
156 .num_resources = 1,
157 .resource = &pcm038_flash_resource,
158};
159
160static const struct imxuart_platform_data uart_pdata __initconst = {
161 .flags = IMXUART_HAVE_RTSCTS,
162};
163
164static const struct mxc_nand_platform_data
165pcm038_nand_board_info __initconst = {
166 .width = 1,
167 .hw_ecc = 1,
168};
169
170static struct platform_device *platform_devices[] __initdata = {
171 &pcm038_nor_mtd_device,
172 &pcm038_sram_mtd_device,
173};
174
175
176
177static void __init pcm038_init_sram(void)
178{
179 __raw_writel(0x0000d843, MX27_IO_ADDRESS(MX27_WEIM_CSCRxU(1)));
180 __raw_writel(0x22252521, MX27_IO_ADDRESS(MX27_WEIM_CSCRxL(1)));
181 __raw_writel(0x22220a00, MX27_IO_ADDRESS(MX27_WEIM_CSCRxA(1)));
182}
183
184static const struct imxi2c_platform_data pcm038_i2c1_data __initconst = {
185 .bitrate = 100000,
186};
187
188static struct at24_platform_data board_eeprom = {
189 .byte_len = 4096,
190 .page_size = 32,
191 .flags = AT24_FLAG_ADDR16,
192};
193
194static struct i2c_board_info pcm038_i2c_devices[] = {
195 {
196 I2C_BOARD_INFO("at24", 0x52),
197 .platform_data = &board_eeprom,
198 }, {
199 I2C_BOARD_INFO("pcf8563", 0x51),
200 }, {
201 I2C_BOARD_INFO("lm75", 0x4a),
202 }
203};
204
205static int pcm038_spi_cs[] = {GPIO_PORTD + 28};
206
207static const struct spi_imx_master pcm038_spi0_data __initconst = {
208 .chipselect = pcm038_spi_cs,
209 .num_chipselect = ARRAY_SIZE(pcm038_spi_cs),
210};
211
212static struct regulator_consumer_supply sdhc1_consumers[] = {
213 {
214 .dev_name = "imx21-mmc.1",
215 .supply = "sdhc_vcc",
216 },
217};
218
219static struct regulator_init_data sdhc1_data = {
220 .constraints = {
221 .min_uV = 3000000,
222 .max_uV = 3400000,
223 .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
224 REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
225 .valid_modes_mask = REGULATOR_MODE_NORMAL |
226 REGULATOR_MODE_FAST,
227 .always_on = 0,
228 .boot_on = 0,
229 },
230 .num_consumer_supplies = ARRAY_SIZE(sdhc1_consumers),
231 .consumer_supplies = sdhc1_consumers,
232};
233
234static struct regulator_consumer_supply cam_consumers[] = {
235 {
236 .dev_name = NULL,
237 .supply = "imx_cam_vcc",
238 },
239};
240
241static struct regulator_init_data cam_data = {
242 .constraints = {
243 .min_uV = 3000000,
244 .max_uV = 3400000,
245 .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
246 REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
247 .valid_modes_mask = REGULATOR_MODE_NORMAL |
248 REGULATOR_MODE_FAST,
249 .always_on = 0,
250 .boot_on = 0,
251 },
252 .num_consumer_supplies = ARRAY_SIZE(cam_consumers),
253 .consumer_supplies = cam_consumers,
254};
255
256static struct mc13xxx_regulator_init_data pcm038_regulators[] = {
257 {
258 .id = MC13783_REG_VCAM,
259 .init_data = &cam_data,
260 }, {
261 .id = MC13783_REG_VMMC1,
262 .init_data = &sdhc1_data,
263 },
264};
265
266static struct mc13xxx_platform_data pcm038_pmic = {
267 .regulators = {
268 .regulators = pcm038_regulators,
269 .num_regulators = ARRAY_SIZE(pcm038_regulators),
270 },
271 .flags = MC13XXX_USE_ADC | MC13XXX_USE_TOUCHSCREEN,
272};
273
274static struct spi_board_info pcm038_spi_board_info[] __initdata = {
275 {
276 .modalias = "mc13783",
277
278 .max_speed_hz = 300000,
279 .bus_num = 0,
280 .chip_select = 0,
281 .platform_data = &pcm038_pmic,
282 .mode = SPI_CS_HIGH,
283 }
284};
285
286static int pcm038_usbh2_init(struct platform_device *pdev)
287{
288 return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED |
289 MXC_EHCI_INTERFACE_DIFF_UNI);
290}
291
292static const struct mxc_usbh_platform_data usbh2_pdata __initconst = {
293 .init = pcm038_usbh2_init,
294 .portsc = MXC_EHCI_MODE_ULPI,
295};
296
297static void __init pcm038_init(void)
298{
299 imx27_soc_init();
300
301 mxc_gpio_setup_multiple_pins(pcm038_pins, ARRAY_SIZE(pcm038_pins),
302 "PCM038");
303
304 pcm038_init_sram();
305
306 imx27_add_imx_uart0(&uart_pdata);
307 imx27_add_imx_uart1(&uart_pdata);
308 imx27_add_imx_uart2(&uart_pdata);
309
310 mxc_gpio_mode(PE16_AF_OWIRE);
311 imx27_add_mxc_nand(&pcm038_nand_board_info);
312
313
314 i2c_register_board_info(1, pcm038_i2c_devices,
315 ARRAY_SIZE(pcm038_i2c_devices));
316
317 imx27_add_imx_i2c(1, &pcm038_i2c1_data);
318
319
320 mxc_gpio_mode(GPIO_PORTE | 18 | GPIO_GPIO | GPIO_OUT);
321
322 mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
323
324
325 mxc_gpio_mode(GPIO_PORTB | 23 | GPIO_GPIO | GPIO_IN);
326
327 imx27_add_spi_imx0(&pcm038_spi0_data);
328 pcm038_spi_board_info[0].irq = gpio_to_irq(IMX_GPIO_NR(2, 23));
329 spi_register_board_info(pcm038_spi_board_info,
330 ARRAY_SIZE(pcm038_spi_board_info));
331
332 imx27_add_mxc_ehci_hs(2, &usbh2_pdata);
333
334 imx27_add_fec(NULL);
335 platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
336 imx27_add_imx2_wdt();
337 imx27_add_mxc_w1();
338
339#ifdef CONFIG_MACH_PCM970_BASEBOARD
340 pcm970_baseboard_init();
341#endif
342}
343
344static void __init pcm038_timer_init(void)
345{
346 mx27_clocks_init(26000000);
347}
348
349MACHINE_START(PCM038, "phyCORE-i.MX27")
350 .atag_offset = 0x100,
351 .map_io = mx27_map_io,
352 .init_early = imx27_init_early,
353 .init_irq = mx27_init_irq,
354 .handle_irq = imx27_handle_irq,
355 .init_time = pcm038_timer_init,
356 .init_machine = pcm038_init,
357 .restart = mxc_restart,
358MACHINE_END
359
