/*
 * Copyright © 2006-2011 Intel Corporation
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms and conditions of the GNU General Public License,
 * version 2, as published by the Free Software Foundation.
 *
 * This program is distributed in the hope it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
 * more details.
 *
 * You should have received a copy of the GNU General Public License along with
 * this program; if not, write to the Free Software Foundation, Inc.,
 * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
 *
 * Authors:
 *      Eric Anholt <eric@anholt.net>
 */

#include <linux/i2c.h>

#include <drm/drmP.h>
#include "framebuffer.h"
#include "psb_drv.h"
#include "psb_intel_drv.h"
#include "psb_intel_reg.h"
#include "gma_display.h"
#include "power.h"
#include "cdv_device.h"

static bool cdv_intel_find_dp_pll(const struct gma_limit_t *limit,
                                  struct drm_crtc *crtc, int target,
                                  int refclk, struct gma_clock_t *best_clock);


#define CDV_LIMIT_SINGLE_LVDS_96        0
#define CDV_LIMIT_SINGLE_LVDS_100       1
#define CDV_LIMIT_DAC_HDMI_27           2
#define CDV_LIMIT_DAC_HDMI_96           3
#define CDV_LIMIT_DP_27                 4
#define CDV_LIMIT_DP_100                5

static const struct gma_limit_t cdv_intel_limits[] = {
        {                       /* CDV_SINGLE_LVDS_96MHz */
         .dot = {.min = 20000, .max = 115500},
         .vco = {.min = 1800000, .max = 3600000},
         .n = {.min = 2, .max = 6},
         .m = {.min = 60, .max = 160},
         .m1 = {.min = 0, .max = 0},
         .m2 = {.min = 58, .max = 158},
         .p = {.min = 28, .max = 140},
         .p1 = {.min = 2, .max = 10},
         .p2 = {.dot_limit = 200000, .p2_slow = 14, .p2_fast = 14},
         .find_pll = gma_find_best_pll,
         },
        {                       /* CDV_SINGLE_LVDS_100MHz */
         .dot = {.min = 20000, .max = 115500},
         .vco = {.min = 1800000, .max = 3600000},
         .n = {.min = 2, .max = 6},
         .m = {.min = 60, .max = 160},
         .m1 = {.min = 0, .max = 0},
         .m2 = {.min = 58, .max = 158},
         .p = {.min = 28, .max = 140},
         .p1 = {.min = 2, .max = 10},
         /* The single-channel range is 25-112Mhz, and dual-channel
          * is 80-224Mhz.  Prefer single channel as much as possible.
          */
         .p2 = {.dot_limit = 200000, .p2_slow = 14, .p2_fast = 14},
         .find_pll = gma_find_best_pll,
         },
        {                       /* CDV_DAC_HDMI_27MHz */
         .dot = {.min = 20000, .max = 400000},
         .vco = {.min = 1809000, .max = 3564000},
         .n = {.min = 1, .max = 1},
         .m = {.min = 67, .max = 132},
         .m1 = {.min = 0, .max = 0},
         .m2 = {.min = 65, .max = 130},
         .p = {.min = 5, .max = 90},
         .p1 = {.min = 1, .max = 9},
         .p2 = {.dot_limit = 225000, .p2_slow = 10, .p2_fast = 5},
         .find_pll = gma_find_best_pll,
         },
        {                       /* CDV_DAC_HDMI_96MHz */
         .dot = {.min = 20000, .max = 400000},
         .vco = {.min = 1800000, .max = 3600000},
         .n = {.min = 2, .max = 6},
         .m = {.min = 60, .max = 160},
         .m1 = {.min = 0, .max = 0},
         .m2 = {.min = 58, .max = 158},
         .p = {.min = 5, .max = 100},
         .p1 = {.min = 1, .max = 10},
         .p2 = {.dot_limit = 225000, .p2_slow = 10, .p2_fast = 5},
         .find_pll = gma_find_best_pll,
         },
        {                       /* CDV_DP_27MHz */
         .dot = {.min = 160000, .max = 272000},
         .vco = {.min = 1809000, .max = 3564000},
         .n = {.min = 1, .max = 1},
         .m = {.min = 67, .max = 132},
         .m1 = {.min = 0, .max = 0},
         .m2 = {.min = 65, .max = 130},
         .p = {.min = 5, .max = 90},
         .p1 = {.min = 1, .max = 9},
         .p2 = {.dot_limit = 225000, .p2_slow = 10, .p2_fast = 10},
         .find_pll = cdv_intel_find_dp_pll,
         },
        {                       /* CDV_DP_100MHz */
         .dot = {.min = 160000, .max = 272000},
         .vco = {.min = 1800000, .max = 3600000},
         .n = {.min = 2, .max = 6},
         .m = {.min = 60, .max = 164},
         .m1 = {.min = 0, .max = 0},
         .m2 = {.min = 58, .max = 162},
         .p = {.min = 5, .max = 100},
         .p1 = {.min = 1, .max = 10},
         .p2 = {.dot_limit = 225000, .p2_slow = 10, .p2_fast = 10},
         .find_pll = cdv_intel_find_dp_pll,
         }      
};

#define _wait_for(COND, MS, W) ({ \
        unsigned long timeout__ = jiffies + msecs_to_jiffies(MS);       \
        int ret__ = 0;                                                  \
        while (!(COND)) {                                               \
                if (time_after(jiffies, timeout__)) {                   \
                        ret__ = -ETIMEDOUT;                             \
                        break;                                          \
                }                                                       \
                if (W && !in_dbg_master())                              \
                        msleep(W);                                      \
        }                                                               \
        ret__;                                                          \
})

#define wait_for(COND, MS) _wait_for(COND, MS, 1)


int cdv_sb_read(struct drm_device *dev, u32 reg, u32 *val)
{
        int ret;

        ret = wait_for((REG_READ(SB_PCKT) & SB_BUSY) == 0, 1000);
        if (ret) {
                DRM_ERROR("timeout waiting for SB to idle before read\n");
                return ret;
        }

        REG_WRITE(SB_ADDR, reg);
        REG_WRITE(SB_PCKT,
                   SET_FIELD(SB_OPCODE_READ, SB_OPCODE) |
                   SET_FIELD(SB_DEST_DPLL, SB_DEST) |
                   SET_FIELD(0xf, SB_BYTE_ENABLE));

        ret = wait_for((REG_READ(SB_PCKT) & SB_BUSY) == 0, 1000);
        if (ret) {
                DRM_ERROR("timeout waiting for SB to idle after read\n");
                return ret;
        }

        *val = REG_READ(SB_DATA);

        return 0;
}

int cdv_sb_write(struct drm_device *dev, u32 reg, u32 val)
{
        int ret;
        static bool dpio_debug = true;
        u32 temp;

        if (dpio_debug) {
                if (cdv_sb_read(dev, reg, &temp) == 0)
                        DRM_DEBUG_KMS("0x%08x: 0x%08x (before)\n", reg, temp);
                DRM_DEBUG_KMS("0x%08x: 0x%08x\n", reg, val);
        }

        ret = wait_for((REG_READ(SB_PCKT) & SB_BUSY) == 0, 1000);
        if (ret) {
                DRM_ERROR("timeout waiting for SB to idle before write\n");
                return ret;
        }

        REG_WRITE(SB_ADDR, reg);
        REG_WRITE(SB_DATA, val);
        REG_WRITE(SB_PCKT,
                   SET_FIELD(SB_OPCODE_WRITE, SB_OPCODE) |
                   SET_FIELD(SB_DEST_DPLL, SB_DEST) |
                   SET_FIELD(0xf, SB_BYTE_ENABLE));

        ret = wait_for((REG_READ(SB_PCKT) & SB_BUSY) == 0, 1000);
        if (ret) {
                DRM_ERROR("timeout waiting for SB to idle after write\n");
                return ret;
        }

        if (dpio_debug) {
                if (cdv_sb_read(dev, reg, &temp) == 0)
                        DRM_DEBUG_KMS("0x%08x: 0x%08x (after)\n", reg, temp);
        }

        return 0;
}

/* Reset the DPIO configuration register.  The BIOS does this at every
 * mode set.
 */
void cdv_sb_reset(struct drm_device *dev)
{

        REG_WRITE(DPIO_CFG, 0);
        REG_READ(DPIO_CFG);
        REG_WRITE(DPIO_CFG, DPIO_MODE_SELECT_0 | DPIO_CMN_RESET_N);
}

/* Unlike most Intel display engines, on Cedarview the DPLL registers
 * are behind this sideband bus.  They must be programmed while the
 * DPLL reference clock is on in the DPLL control register, but before
 * the DPLL is enabled in the DPLL control register.
 */
static int
cdv_dpll_set_clock_cdv(struct drm_device *dev, struct drm_crtc *crtc,
                       struct gma_clock_t *clock, bool is_lvds, u32 ddi_select)
{
        struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
        int pipe = gma_crtc->pipe;
        u32 m, n_vco, p;
        int ret = 0;
        int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B;
        int ref_sfr = (pipe == 0) ? SB_REF_DPLLA : SB_REF_DPLLB;
        u32 ref_value;
        u32 lane_reg, lane_value;

        cdv_sb_reset(dev);

        REG_WRITE(dpll_reg, DPLL_SYNCLOCK_ENABLE | DPLL_VGA_MODE_DIS);

        udelay(100);

        /* Follow the BIOS and write the REF/SFR Register. Hardcoded value */
        ref_value = 0x68A701;

        cdv_sb_write(dev, SB_REF_SFR(pipe), ref_value);

        /* We don't know what the other fields of these regs are, so
         * leave them in place.
         */
        /* 
         * The BIT 14:13 of 0x8010/0x8030 is used to select the ref clk
         * for the pipe A/B. Display spec 1.06 has wrong definition.
         * Correct definition is like below:
         *
         * refclka mean use clock from same PLL
         *
         * if DPLLA sets 01 and DPLLB sets 01, they use clock from their pll
         *
         * if DPLLA sets 01 and DPLLB sets 02, both use clk from DPLLA
         *
         */  
        ret = cdv_sb_read(dev, ref_sfr, &ref_value);
        if (ret)
                return ret;
        ref_value &= ~(REF_CLK_MASK);

        /* use DPLL_A for pipeB on CRT/HDMI */
        if (pipe == 1 && !is_lvds && !(ddi_select & DP_MASK)) {
                DRM_DEBUG_KMS("use DPLLA for pipe B\n");
                ref_value |= REF_CLK_DPLLA;
        } else {
                DRM_DEBUG_KMS("use their DPLL for pipe A/B\n");
                ref_value |= REF_CLK_DPLL;
        }
        ret = cdv_sb_write(dev, ref_sfr, ref_value);
        if (ret)
                return ret;

        ret = cdv_sb_read(dev, SB_M(pipe), &m);
        if (ret)
                return ret;
        m &= ~SB_M_DIVIDER_MASK;
        m |= ((clock->m2) << SB_M_DIVIDER_SHIFT);
        ret = cdv_sb_write(dev, SB_M(pipe), m);
        if (ret)
                return ret;

        ret = cdv_sb_read(dev, SB_N_VCO(pipe), &n_vco);
        if (ret)
                return ret;

        /* Follow the BIOS to program the N_DIVIDER REG */
        n_vco &= 0xFFFF;
        n_vco |= 0x107;
        n_vco &= ~(SB_N_VCO_SEL_MASK |
                   SB_N_DIVIDER_MASK |
                   SB_N_CB_TUNE_MASK);

        n_vco |= ((clock->n) << SB_N_DIVIDER_SHIFT);

        if (clock->vco < 2250000) {
                n_vco |= (2 << SB_N_CB_TUNE_SHIFT);
                n_vco |= (0 << SB_N_VCO_SEL_SHIFT);
        } else if (clock->vco < 2750000) {
                n_vco |= (1 << SB_N_CB_TUNE_SHIFT);
                n_vco |= (1 << SB_N_VCO_SEL_SHIFT);
        } else if (clock->vco < 3300000) {
                n_vco |= (0 << SB_N_CB_TUNE_SHIFT);
                n_vco |= (2 << SB_N_VCO_SEL_SHIFT);
        } else {
                n_vco |= (0 << SB_N_CB_TUNE_SHIFT);
                n_vco |= (3 << SB_N_VCO_SEL_SHIFT);
        }

        ret = cdv_sb_write(dev, SB_N_VCO(pipe), n_vco);
        if (ret)
                return ret;

        ret = cdv_sb_read(dev, SB_P(pipe), &p);
        if (ret)
                return ret;
        p &= ~(SB_P2_DIVIDER_MASK | SB_P1_DIVIDER_MASK);
        p |= SET_FIELD(clock->p1, SB_P1_DIVIDER);
        switch (clock->p2) {
        case 5:
                p |= SET_FIELD(SB_P2_5, SB_P2_DIVIDER);
                break;
        case 10:
                p |= SET_FIELD(SB_P2_10, SB_P2_DIVIDER);
                break;
        case 14:
                p |= SET_FIELD(SB_P2_14, SB_P2_DIVIDER);
                break;
        case 7:
                p |= SET_FIELD(SB_P2_7, SB_P2_DIVIDER);
                break;
        default:
                DRM_ERROR("Bad P2 clock: %d\n", clock->p2);
                return -EINVAL;
        }
        ret = cdv_sb_write(dev, SB_P(pipe), p);
        if (ret)
                return ret;

        if (ddi_select) {
                if ((ddi_select & DDI_MASK) == DDI0_SELECT) {
                        lane_reg = PSB_LANE0;
                        cdv_sb_read(dev, lane_reg, &lane_value);
                        lane_value &= ~(LANE_PLL_MASK);
                        lane_value |= LANE_PLL_ENABLE | LANE_PLL_PIPE(pipe);
                        cdv_sb_write(dev, lane_reg, lane_value);

                        lane_reg = PSB_LANE1;
                        cdv_sb_read(dev, lane_reg, &lane_value);
                        lane_value &= ~(LANE_PLL_MASK);
                        lane_value |= LANE_PLL_ENABLE | LANE_PLL_PIPE(pipe);
                        cdv_sb_write(dev, lane_reg, lane_value);
                } else {
                        lane_reg = PSB_LANE2;
                        cdv_sb_read(dev, lane_reg, &lane_value);
                        lane_value &= ~(LANE_PLL_MASK);
                        lane_value |= LANE_PLL_ENABLE | LANE_PLL_PIPE(pipe);
                        cdv_sb_write(dev, lane_reg, lane_value);

                        lane_reg = PSB_LANE3;
                        cdv_sb_read(dev, lane_reg, &lane_value);
                        lane_value &= ~(LANE_PLL_MASK);
                        lane_value |= LANE_PLL_ENABLE | LANE_PLL_PIPE(pipe);
                        cdv_sb_write(dev, lane_reg, lane_value);
                }
        }
        return 0;
}

static const struct gma_limit_t *cdv_intel_limit(struct drm_crtc *crtc,
                                                 int refclk)
{
        const struct gma_limit_t *limit;
        if (gma_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
                /*
                 * Now only single-channel LVDS is supported on CDV. If it is
                 * incorrect, please add the dual-channel LVDS.
                 */
                if (refclk == 96000)
                        limit = &cdv_intel_limits[CDV_LIMIT_SINGLE_LVDS_96];
                else
                        limit = &cdv_intel_limits[CDV_LIMIT_SINGLE_LVDS_100];
        } else if (gma_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) ||
                        gma_pipe_has_type(crtc, INTEL_OUTPUT_EDP)) {
                if (refclk == 27000)
                        limit = &cdv_intel_limits[CDV_LIMIT_DP_27];
                else
                        limit = &cdv_intel_limits[CDV_LIMIT_DP_100];
        } else {
                if (refclk == 27000)
                        limit = &cdv_intel_limits[CDV_LIMIT_DAC_HDMI_27];
                else
                        limit = &cdv_intel_limits[CDV_LIMIT_DAC_HDMI_96];
        }
        return limit;
}

/* m1 is reserved as 0 in CDV, n is a ring counter */
static void cdv_intel_clock(int refclk, struct gma_clock_t *clock)
{
        clock->m = clock->m2 + 2;
        clock->p = clock->p1 * clock->p2;
        clock->vco = (refclk * clock->m) / clock->n;
        clock->dot = clock->vco / clock->p;
}

static bool cdv_intel_find_dp_pll(const struct gma_limit_t *limit,
                                  struct drm_crtc *crtc, int target,
                                  int refclk,
                                  struct gma_clock_t *best_clock)
{
        struct gma_clock_t clock;
        if (refclk == 27000) {
                if (target < 200000) {
                        clock.p1 = 2;
                        clock.p2 = 10;
                        clock.n = 1;
                        clock.m1 = 0;
                        clock.m2 = 118;
                } else {
                        clock.p1 = 1;
                        clock.p2 = 10;
                        clock.n = 1;
                        clock.m1 = 0;
                        clock.m2 = 98;
                }
        } else if (refclk == 100000) {
                if (target < 200000) {
                        clock.p1 = 2;
                        clock.p2 = 10;
                        clock.n = 5;
                        clock.m1 = 0;
                        clock.m2 = 160;
                } else {
                        clock.p1 = 1;
                        clock.p2 = 10;
                        clock.n = 5;
                        clock.m1 = 0;
                        clock.m2 = 133;
                }
        } else
                return false;
        clock.m = clock.m2 + 2;
        clock.p = clock.p1 * clock.p2;
        clock.vco = (refclk * clock.m) / clock.n;
        clock.dot = clock.vco / clock.p;
        memcpy(best_clock, &clock, sizeof(struct gma_clock_t));
        return true;
}

#define         FIFO_PIPEA              (1 << 0)
#define         FIFO_PIPEB              (1 << 1)

static bool cdv_intel_pipe_enabled(struct drm_device *dev, int pipe)
{
        struct drm_crtc *crtc;
        struct drm_psb_private *dev_priv = dev->dev_private;
        struct gma_crtc *gma_crtc = NULL;

        crtc = dev_priv->pipe_to_crtc_mapping[pipe];
        gma_crtc = to_gma_crtc(crtc);

        if (crtc->fb == NULL || !gma_crtc->active)
                return false;
        return true;
}

static bool cdv_intel_single_pipe_active (struct drm_device *dev)
{
        uint32_t pipe_enabled = 0;

        if (cdv_intel_pipe_enabled(dev, 0))
                pipe_enabled |= FIFO_PIPEA;

        if (cdv_intel_pipe_enabled(dev, 1))
                pipe_enabled |= FIFO_PIPEB;


        DRM_DEBUG_KMS("pipe enabled %x\n", pipe_enabled);

        if (pipe_enabled == FIFO_PIPEA || pipe_enabled == FIFO_PIPEB)
                return true;
        else
                return false;
}

static bool is_pipeb_lvds(struct drm_device *dev, struct drm_crtc *crtc)
{
        struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
        struct drm_mode_config *mode_config = &dev->mode_config;
        struct drm_connector *connector;

        if (gma_crtc->pipe != 1)
                return false;

        list_for_each_entry(connector, &mode_config->connector_list, head) {
                struct gma_encoder *gma_encoder =
                                        gma_attached_encoder(connector);

                if (!connector->encoder
                    || connector->encoder->crtc != crtc)
                        continue;

                if (gma_encoder->type == INTEL_OUTPUT_LVDS)
                        return true;
        }

        return false;
}

void cdv_disable_sr(struct drm_device *dev)
{
        if (REG_READ(FW_BLC_SELF) & FW_BLC_SELF_EN) {

                /* Disable self-refresh before adjust WM */
                REG_WRITE(FW_BLC_SELF, (REG_READ(FW_BLC_SELF) & ~FW_BLC_SELF_EN));
                REG_READ(FW_BLC_SELF);

                gma_wait_for_vblank(dev);

                /* Cedarview workaround to write ovelay plane, which force to leave
                 * MAX_FIFO state.
                 */
                REG_WRITE(OV_OVADD, 0/*dev_priv->ovl_offset*/);
                REG_READ(OV_OVADD);

                gma_wait_for_vblank(dev);
        }

}

void cdv_update_wm(struct drm_device *dev, struct drm_crtc *crtc)
{
        struct drm_psb_private *dev_priv = dev->dev_private;

        if (cdv_intel_single_pipe_active(dev)) {
                u32 fw;

                fw = REG_READ(DSPFW1);
                fw &= ~DSP_FIFO_SR_WM_MASK;
                fw |= (0x7e << DSP_FIFO_SR_WM_SHIFT);
                fw &= ~CURSOR_B_FIFO_WM_MASK;
                fw |= (0x4 << CURSOR_B_FIFO_WM_SHIFT);
                REG_WRITE(DSPFW1, fw);

                fw = REG_READ(DSPFW2);
                fw &= ~CURSOR_A_FIFO_WM_MASK;
                fw |= (0x6 << CURSOR_A_FIFO_WM_SHIFT);
                fw &= ~DSP_PLANE_C_FIFO_WM_MASK;
                fw |= (0x8 << DSP_PLANE_C_FIFO_WM_SHIFT);
                REG_WRITE(DSPFW2, fw);

                REG_WRITE(DSPFW3, 0x36000000);

                /* ignore FW4 */

                if (is_pipeb_lvds(dev, crtc)) {
                        REG_WRITE(DSPFW5, 0x00040330);
                } else {
                        fw = (3 << DSP_PLANE_B_FIFO_WM1_SHIFT) |
                             (4 << DSP_PLANE_A_FIFO_WM1_SHIFT) |
                             (3 << CURSOR_B_FIFO_WM1_SHIFT) |
                             (4 << CURSOR_FIFO_SR_WM1_SHIFT);
                        REG_WRITE(DSPFW5, fw);
                }

                REG_WRITE(DSPFW6, 0x10);

                gma_wait_for_vblank(dev);

                /* enable self-refresh for single pipe active */
                REG_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN);
                REG_READ(FW_BLC_SELF);
                gma_wait_for_vblank(dev);

        } else {

                /* HW team suggested values... */
                REG_WRITE(DSPFW1, 0x3f880808);
                REG_WRITE(DSPFW2, 0x0b020202);
                REG_WRITE(DSPFW3, 0x24000000);
                REG_WRITE(DSPFW4, 0x08030202);
                REG_WRITE(DSPFW5, 0x01010101);
                REG_WRITE(DSPFW6, 0x1d0);

                gma_wait_for_vblank(dev);

                dev_priv->ops->disable_sr(dev);
        }
}

/**
 * Return the pipe currently connected to the panel fitter,
 * or -1 if the panel fitter is not present or not in use
 */
static int cdv_intel_panel_fitter_pipe(struct drm_device *dev)
{
        u32 pfit_control;

        pfit_control = REG_READ(PFIT_CONTROL);

        /* See if the panel fitter is in use */
        if ((pfit_control & PFIT_ENABLE) == 0)
                return -1;
        return (pfit_control >> 29) & 0x3;
}

static int cdv_intel_crtc_mode_set(struct drm_crtc *crtc,
                               struct drm_display_mode *mode,
                               struct drm_display_mode *adjusted_mode,
                               int x, int y,
                               struct drm_framebuffer *old_fb)
{
        struct drm_device *dev = crtc->dev;
        struct drm_psb_private *dev_priv = dev->dev_private;
        struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
        int pipe = gma_crtc->pipe;
        const struct psb_offset *map = &dev_priv->regmap[pipe];
        int refclk;
        struct gma_clock_t clock;
        u32 dpll = 0, dspcntr, pipeconf;
        bool ok;
        bool is_crt = false, is_lvds = false, is_tv = false;
        bool is_hdmi = false, is_dp = false;
        struct drm_mode_config *mode_config = &dev->mode_config;
        struct drm_connector *connector;
        const struct gma_limit_t *limit;
        u32 ddi_select = 0;
        bool is_edp = false;

        list_for_each_entry(connector, &mode_config->connector_list, head) {
                struct gma_encoder *gma_encoder =
                                        gma_attached_encoder(connector);

                if (!connector->encoder
                    || connector->encoder->crtc != crtc)
                        continue;

                ddi_select = gma_encoder->ddi_select;
                switch (gma_encoder->type) {
                case INTEL_OUTPUT_LVDS:
                        is_lvds = true;
                        break;
                case INTEL_OUTPUT_TVOUT:
                        is_tv = true;
                        break;
                case INTEL_OUTPUT_ANALOG:
                        is_crt = true;
                        break;
                case INTEL_OUTPUT_HDMI:
                        is_hdmi = true;
                        break;
                case INTEL_OUTPUT_DISPLAYPORT:
                        is_dp = true;
                        break;
                case INTEL_OUTPUT_EDP:
                        is_edp = true;
                        break;
                default:
                        DRM_ERROR("invalid output type.\n");
                        return 0;
                }
        }

        if (dev_priv->dplla_96mhz)
                /* low-end sku, 96/100 mhz */
                refclk = 96000;
        else
                /* high-end sku, 27/100 mhz */
                refclk = 27000;
        if (is_dp || is_edp) {
                /*
                 * Based on the spec the low-end SKU has only CRT/LVDS. So it is
                 * unnecessary to consider it for DP/eDP.
                 * On the high-end SKU, it will use the 27/100M reference clk
                 * for DP/eDP. When using SSC clock, the ref clk is 100MHz.Otherwise
                 * it will be 27MHz. From the VBIOS code it seems that the pipe A choose
                 * 27MHz for DP/eDP while the Pipe B chooses the 100MHz.
                 */ 
                if (pipe == 0)
                        refclk = 27000;
                else
                        refclk = 100000;
        }

        if (is_lvds && dev_priv->lvds_use_ssc) {
                refclk = dev_priv->lvds_ssc_freq * 1000;
                DRM_DEBUG_KMS("Use SSC reference clock %d Mhz\n", dev_priv->lvds_ssc_freq);
        }

        drm_mode_debug_printmodeline(adjusted_mode);
        
        limit = gma_crtc->clock_funcs->limit(crtc, refclk);

        ok = limit->find_pll(limit, crtc, adjusted_mode->clock, refclk,
                                 &clock);
        if (!ok) {
                DRM_ERROR("Couldn't find PLL settings for mode! target: %d, actual: %d",
                          adjusted_mode->clock, clock.dot);
                return 0;
        }

        dpll = DPLL_VGA_MODE_DIS;
        if (is_tv) {
                /* XXX: just matching BIOS for now */
/*      dpll |= PLL_REF_INPUT_TVCLKINBC; */
                dpll |= 3;
        }
/*              dpll |= PLL_REF_INPUT_DREFCLK; */

        if (is_dp || is_edp) {
                cdv_intel_dp_set_m_n(crtc, mode, adjusted_mode);
        } else {
                REG_WRITE(PIPE_GMCH_DATA_M(pipe), 0);
                REG_WRITE(PIPE_GMCH_DATA_N(pipe), 0);
                REG_WRITE(PIPE_DP_LINK_M(pipe), 0);
                REG_WRITE(PIPE_DP_LINK_N(pipe), 0);
        }

        dpll |= DPLL_SYNCLOCK_ENABLE;
/*      if (is_lvds)
                dpll |= DPLLB_MODE_LVDS;
        else
                dpll |= DPLLB_MODE_DAC_SERIAL; */
        /* dpll |= (2 << 11); */

        /* setup pipeconf */
        pipeconf = REG_READ(map->conf);

        pipeconf &= ~(PIPE_BPC_MASK);
        if (is_edp) {
                switch (dev_priv->edp.bpp) {
                case 24:
                        pipeconf |= PIPE_8BPC;
                        break;
                case 18:
                        pipeconf |= PIPE_6BPC;
                        break;
                case 30:
                        pipeconf |= PIPE_10BPC;
                        break;
                default:
                        pipeconf |= PIPE_8BPC;
                        break;
                }
        } else if (is_lvds) {
                /* the BPC will be 6 if it is 18-bit LVDS panel */
                if ((REG_READ(LVDS) & LVDS_A3_POWER_MASK) == LVDS_A3_POWER_UP)
                        pipeconf |= PIPE_8BPC;
                else
                        pipeconf |= PIPE_6BPC;
        } else
                pipeconf |= PIPE_8BPC;
                        
        /* Set up the display plane register */
        dspcntr = DISPPLANE_GAMMA_ENABLE;

        if (pipe == 0)
                dspcntr |= DISPPLANE_SEL_PIPE_A;
        else
                dspcntr |= DISPPLANE_SEL_PIPE_B;

        dspcntr |= DISPLAY_PLANE_ENABLE;
        pipeconf |= PIPEACONF_ENABLE;

        REG_WRITE(map->dpll, dpll | DPLL_VGA_MODE_DIS | DPLL_SYNCLOCK_ENABLE);
        REG_READ(map->dpll);

        cdv_dpll_set_clock_cdv(dev, crtc, &clock, is_lvds, ddi_select);

        udelay(150);


        /* The LVDS pin pair needs to be on before the DPLLs are enabled.
         * This is an exception to the general rule that mode_set doesn't turn
         * things on.
         */
        if (is_lvds) {
                u32 lvds = REG_READ(LVDS);

                lvds |=
                    LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP |
                    LVDS_PIPEB_SELECT;
                /* Set the B0-B3 data pairs corresponding to
                 * whether we're going to
                 * set the DPLLs for dual-channel mode or not.
                 */
                if (clock.p2 == 7)
                        lvds |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP;
                else
                        lvds &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP);

                /* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP)
                 * appropriately here, but we need to look more
                 * thoroughly into how panels behave in the two modes.
                 */

                REG_WRITE(LVDS, lvds);
                REG_READ(LVDS);
        }

        dpll |= DPLL_VCO_ENABLE;

        /* Disable the panel fitter if it was on our pipe */
        if (cdv_intel_panel_fitter_pipe(dev) == pipe)
                REG_WRITE(PFIT_CONTROL, 0);

        DRM_DEBUG_KMS("Mode for pipe %c:\n", pipe == 0 ? 'A' : 'B');
        drm_mode_debug_printmodeline(mode);

        REG_WRITE(map->dpll,
                (REG_READ(map->dpll) & ~DPLL_LOCK) | DPLL_VCO_ENABLE);
        REG_READ(map->dpll);
        /* Wait for the clocks to stabilize. */
        udelay(150); /* 42 usec w/o calibration, 110 with.  rounded up. */

        if (!(REG_READ(map->dpll) & DPLL_LOCK)) {
                dev_err(dev->dev, "Failed to get DPLL lock\n");
                return -EBUSY;
        }

        {
                int sdvo_pixel_multiply = adjusted_mode->clock / mode->clock;
                REG_WRITE(map->dpll_md, (0 << DPLL_MD_UDI_DIVIDER_SHIFT) | ((sdvo_pixel_multiply - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT));
        }

        REG_WRITE(map->htotal, (adjusted_mode->crtc_hdisplay - 1) |
                  ((adjusted_mode->crtc_htotal - 1) << 16));
        REG_WRITE(map->hblank, (adjusted_mode->crtc_hblank_start - 1) |
                  ((adjusted_mode->crtc_hblank_end - 1) << 16));
        REG_WRITE(map->hsync, (adjusted_mode->crtc_hsync_start - 1) |
                  ((adjusted_mode->crtc_hsync_end - 1) << 16));
        REG_WRITE(map->vtotal, (adjusted_mode->crtc_vdisplay - 1) |
                  ((adjusted_mode->crtc_vtotal - 1) << 16));
        REG_WRITE(map->vblank, (adjusted_mode->crtc_vblank_start - 1) |
                  ((adjusted_mode->crtc_vblank_end - 1) << 16));
        REG_WRITE(map->vsync, (adjusted_mode->crtc_vsync_start - 1) |
                  ((adjusted_mode->crtc_vsync_end - 1) << 16));
        /* pipesrc and dspsize control the size that is scaled from,
         * which should always be the user's requested size.
         */
        REG_WRITE(map->size,
                  ((mode->vdisplay - 1) << 16) | (mode->hdisplay - 1));
        REG_WRITE(map->pos, 0);
        REG_WRITE(map->src,
                  ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1));
        REG_WRITE(map->conf, pipeconf);
        REG_READ(map->conf);

        gma_wait_for_vblank(dev);

        REG_WRITE(map->cntr, dspcntr);

        /* Flush the plane changes */
        {
                struct drm_crtc_helper_funcs *crtc_funcs =
                    crtc->helper_private;
                crtc_funcs->mode_set_base(crtc, x, y, old_fb);
        }

        gma_wait_for_vblank(dev);

        return 0;
}

/** Derive the pixel clock for the given refclk and divisors for 8xx chips. */

/* FIXME: why are we using this, should it be cdv_ in this tree ? */

static void i8xx_clock(int refclk, struct gma_clock_t *clock)
{
        clock->m = 5 * (clock->m1 + 2) + (clock->m2 + 2);
        clock->p = clock->p1 * clock->p2;
        clock->vco = refclk * clock->m / (clock->n + 2);
        clock->dot = clock->vco / clock->p;
}

/* Returns the clock of the currently programmed mode of the given pipe. */
static int cdv_intel_crtc_clock_get(struct drm_device *dev,
                                struct drm_crtc *crtc)
{
        struct drm_psb_private *dev_priv = dev->dev_private;
        struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
        int pipe = gma_crtc->pipe;
        const struct psb_offset *map = &dev_priv->regmap[pipe];
        u32 dpll;
        u32 fp;
        struct gma_clock_t clock;
        bool is_lvds;
        struct psb_pipe *p = &dev_priv->regs.pipe[pipe];

        if (gma_power_begin(dev, false)) {
                dpll = REG_READ(map->dpll);
                if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0)
                        fp = REG_READ(map->fp0);
                else
                        fp = REG_READ(map->fp1);
                is_lvds = (pipe == 1) && (REG_READ(LVDS) & LVDS_PORT_EN);
                gma_power_end(dev);
        } else {
                dpll = p->dpll;
                if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0)
                        fp = p->fp0;
                else
                        fp = p->fp1;

                is_lvds = (pipe == 1) &&
                                (dev_priv->regs.psb.saveLVDS & LVDS_PORT_EN);
        }

        clock.m1 = (fp & FP_M1_DIV_MASK) >> FP_M1_DIV_SHIFT;
        clock.m2 = (fp & FP_M2_DIV_MASK) >> FP_M2_DIV_SHIFT;
        clock.n = (fp & FP_N_DIV_MASK) >> FP_N_DIV_SHIFT;

        if (is_lvds) {
                clock.p1 =
                    ffs((dpll &
                         DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS) >>
                        DPLL_FPA01_P1_POST_DIV_SHIFT);
                if (clock.p1 == 0) {
                        clock.p1 = 4;
                        dev_err(dev->dev, "PLL %d\n", dpll);
                }
                clock.p2 = 14;

                if ((dpll & PLL_REF_INPUT_MASK) ==
                    PLLB_REF_INPUT_SPREADSPECTRUMIN) {
                        /* XXX: might not be 66MHz */
                        i8xx_clock(66000, &clock);
                } else
                        i8xx_clock(48000, &clock);
        } else {
                if (dpll & PLL_P1_DIVIDE_BY_TWO)
                        clock.p1 = 2;
                else {
                        clock.p1 =
                            ((dpll &
                              DPLL_FPA01_P1_POST_DIV_MASK_I830) >>
                             DPLL_FPA01_P1_POST_DIV_SHIFT) + 2;
                }
                if (dpll & PLL_P2_DIVIDE_BY_4)
                        clock.p2 = 4;
                else
                        clock.p2 = 2;

                i8xx_clock(48000, &clock);
        }

        /* XXX: It would be nice to validate the clocks, but we can't reuse
         * i830PllIsValid() because it relies on the xf86_config connector
         * configuration being accurate, which it isn't necessarily.
         */

        return clock.dot;
}

/** Returns the currently programmed mode of the given pipe. */
struct drm_display_mode *cdv_intel_crtc_mode_get(struct drm_device *dev,
                                             struct drm_crtc *crtc)
{
        struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
        int pipe = gma_crtc->pipe;
        struct drm_psb_private *dev_priv = dev->dev_private;
        struct psb_pipe *p = &dev_priv->regs.pipe[pipe];
        const struct psb_offset *map = &dev_priv->regmap[pipe];
        struct drm_display_mode *mode;
        int htot;
        int hsync;
        int vtot;
        int vsync;

        if (gma_power_begin(dev, false)) {
                htot = REG_READ(map->htotal);
                hsync = REG_READ(map->hsync);
                vtot = REG_READ(map->vtotal);
                vsync = REG_READ(map->vsync);
                gma_power_end(dev);
        } else {
                htot = p->htotal;
                hsync = p->hsync;
                vtot = p->vtotal;
                vsync = p->vsync;
        }

        mode = kzalloc(sizeof(*mode), GFP_KERNEL);
        if (!mode)
                return NULL;

        mode->clock = cdv_intel_crtc_clock_get(dev, crtc);
        mode->hdisplay = (htot & 0xffff) + 1;
        mode->htotal = ((htot & 0xffff0000) >> 16) + 1;
        mode->hsync_start = (hsync & 0xffff) + 1;
        mode->hsync_end = ((hsync & 0xffff0000) >> 16) + 1;
        mode->vdisplay = (vtot & 0xffff) + 1;
        mode->vtotal = ((vtot & 0xffff0000) >> 16) + 1;
        mode->vsync_start = (vsync & 0xffff) + 1;
        mode->vsync_end = ((vsync & 0xffff0000) >> 16) + 1;

        drm_mode_set_name(mode);
        drm_mode_set_crtcinfo(mode, 0);

        return mode;
}

const struct drm_crtc_helper_funcs cdv_intel_helper_funcs = {
        .dpms = gma_crtc_dpms,
        .mode_fixup = gma_crtc_mode_fixup,
        .mode_set = cdv_intel_crtc_mode_set,
        .mode_set_base = gma_pipe_set_base,
        .prepare = gma_crtc_prepare,
        .commit = gma_crtc_commit,
        .disable = gma_crtc_disable,
};

const struct drm_crtc_funcs cdv_intel_crtc_funcs = {
        .save = gma_crtc_save,
        .restore = gma_crtc_restore,
        .cursor_set = gma_crtc_cursor_set,
        .cursor_move = gma_crtc_cursor_move,
        .gamma_set = gma_crtc_gamma_set,
        .set_config = gma_crtc_set_config,
        .destroy = gma_crtc_destroy,
};

const struct gma_clock_funcs cdv_clock_funcs = {
        .clock = cdv_intel_clock,
        .limit = cdv_intel_limit,
        .pll_is_valid = gma_pll_is_valid,
};