/*
 * I2C access for DA9052 PMICs.
 *
 * Copyright(c) 2011 Dialog Semiconductor Ltd.
 *
 * Author: David Dajun Chen <dchen@diasemi.com>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 */

#include <linux/device.h>
#include <linux/module.h>
#include <linux/input.h>
#include <linux/mfd/core.h>
#include <linux/i2c.h>
#include <linux/err.h>

#include <linux/mfd/da9052/da9052.h>
#include <linux/mfd/da9052/reg.h>

#ifdef CONFIG_OF
#include <linux/of.h>
#include <linux/of_device.h>
#endif

/* I2C safe register check */
static inline bool i2c_safe_reg(unsigned char reg)
{
        switch (reg) {
        case DA9052_STATUS_A_REG:
        case DA9052_STATUS_B_REG:
        case DA9052_STATUS_C_REG:
        case DA9052_STATUS_D_REG:
        case DA9052_ADC_RES_L_REG:
        case DA9052_ADC_RES_H_REG:
        case DA9052_VDD_RES_REG:
        case DA9052_ICHG_AV_REG:
        case DA9052_TBAT_RES_REG:
        case DA9052_ADCIN4_RES_REG:
        case DA9052_ADCIN5_RES_REG:
        case DA9052_ADCIN6_RES_REG:
        case DA9052_TJUNC_RES_REG:
        case DA9052_TSI_X_MSB_REG:
        case DA9052_TSI_Y_MSB_REG:
        case DA9052_TSI_LSB_REG:
        case DA9052_TSI_Z_MSB_REG:
                return true;
        default:
                return false;
        }
}

/*
 * There is an issue with DA9052 and DA9053_AA/BA/BB PMIC where the PMIC
 * gets lockup up or fails to respond following a system reset.
 * This fix is to follow any read or write with a dummy read to a safe
 * register.
 */
static int da9052_i2c_fix(struct da9052 *da9052, unsigned char reg)
{
        int val;

        switch (da9052->chip_id) {
        case DA9052:
        case DA9053_AA:
        case DA9053_BA:
        case DA9053_BB:
                /* A dummy read to a safe register address. */
        if (!i2c_safe_reg(reg))
                        return regmap_read(da9052->regmap,
                                           DA9052_PARK_REGISTER,
                                           &val);
                break;
        default:
                /*
                 * For other chips parking of I2C register
                 * to a safe place is not required.
                 */
                break;
        }

        return 0;
}

/*
 * According to errata item 24, multiwrite mode should be avoided
 * in order to prevent register data corruption after power-down.
 */
static int da9052_i2c_disable_multiwrite(struct da9052 *da9052)
{
        int reg_val, ret;

        ret = regmap_read(da9052->regmap, DA9052_CONTROL_B_REG, &reg_val);
        if (ret < 0)
                return ret;

        if (!(reg_val & DA9052_CONTROL_B_WRITEMODE)) {
                reg_val |= DA9052_CONTROL_B_WRITEMODE;
                ret = regmap_write(da9052->regmap, DA9052_CONTROL_B_REG,
                                   reg_val);
                if (ret < 0)
                        return ret;
        }

        return 0;
}

static const struct i2c_device_id da9052_i2c_id[] = {
        {"da9052", DA9052},
        {"da9053-aa", DA9053_AA},
        {"da9053-ba", DA9053_BA},
        {"da9053-bb", DA9053_BB},
        {}
};

#ifdef CONFIG_OF
static const struct of_device_id dialog_dt_ids[] = {
        { .compatible = "dlg,da9052", .data = &da9052_i2c_id[0] },
        { .compatible = "dlg,da9053-aa", .data = &da9052_i2c_id[1] },
        { .compatible = "dlg,da9053-ab", .data = &da9052_i2c_id[2] },
        { .compatible = "dlg,da9053-bb", .data = &da9052_i2c_id[3] },
        { /* sentinel */ }
};
#endif

static int da9052_i2c_probe(struct i2c_client *client,
                                       const struct i2c_device_id *id)
{
        struct da9052 *da9052;
        int ret;

        da9052 = devm_kzalloc(&client->dev, sizeof(struct da9052), GFP_KERNEL);
        if (!da9052)
                return -ENOMEM;

        if (!i2c_check_functionality(client->adapter,
                                     I2C_FUNC_SMBUS_BYTE_DATA)) {
                dev_info(&client->dev, "Error in %s:i2c_check_functionality\n",
                         __func__);
                return  -ENODEV;
        }

        da9052->dev = &client->dev;
        da9052->chip_irq = client->irq;
        da9052->fix_io = da9052_i2c_fix;

        i2c_set_clientdata(client, da9052);

        da9052->regmap = devm_regmap_init_i2c(client, &da9052_regmap_config);
        if (IS_ERR(da9052->regmap)) {
                ret = PTR_ERR(da9052->regmap);
                dev_err(&client->dev, "Failed to allocate register map: %d\n",
                        ret);
                return ret;
        }

        ret = da9052_i2c_disable_multiwrite(da9052);
        if (ret < 0)
                return ret;

#ifdef CONFIG_OF
        if (!id) {
                struct device_node *np = client->dev.of_node;
                const struct of_device_id *deviceid;

                deviceid = of_match_node(dialog_dt_ids, np);
                id = deviceid->data;
        }
#endif

        if (!id) {
                ret = -ENODEV;
                dev_err(&client->dev, "id is null.\n");
                return ret;
        }

        ret = da9052_device_init(da9052, id->driver_data);
        if (ret != 0)
                return ret;

        return 0;
}

static int da9052_i2c_remove(struct i2c_client *client)
{
        struct da9052 *da9052 = i2c_get_clientdata(client);

        da9052_device_exit(da9052);
        return 0;
}

static struct i2c_driver da9052_i2c_driver = {
        .probe = da9052_i2c_probe,
        .remove = da9052_i2c_remove,
        .id_table = da9052_i2c_id,
        .driver = {
                .name = "da9052",
                .owner = THIS_MODULE,
#ifdef CONFIG_OF
                .of_match_table = dialog_dt_ids,
#endif
        },
};

static int __init da9052_i2c_init(void)
{
        int ret;

        ret = i2c_add_driver(&da9052_i2c_driver);
        if (ret != 0) {
                pr_err("DA9052 I2C registration failed %d\n", ret);
                return ret;
        }

        return 0;
}
subsys_initcall(da9052_i2c_init);

static void __exit da9052_i2c_exit(void)
{
        i2c_del_driver(&da9052_i2c_driver);
}
module_exit(da9052_i2c_exit);

MODULE_AUTHOR("David Dajun Chen <dchen@diasemi.com>");
MODULE_DESCRIPTION("I2C driver for Dialog DA9052 PMIC");
MODULE_LICENSE("GPL");