LXR linux/Documentation/scsi/scsi-parameters.txt

   1                          SCSI Kernel Parameters
   2                          ~~~~~~~~~~~~~~~~~~~~~~
   3
   4See Documentation/kernel-parameters.txt for general information on
   5specifying module parameters.
   6
   7This document may not be entirely up to date and comprehensive. The command
   8"modinfo -p ${modulename}" shows a current list of all parameters of a loadable
   9module. Loadable modules, after being loaded into the running kernel, also
  10reveal their parameters in /sys/module/${modulename}/parameters/. Some of these
  11parameters may be changed at runtime by the command
  12"echo -n ${value} > /sys/module/${modulename}/parameters/${parm}".
  13
  14
  15        advansys=       [HW,SCSI]
  16                        See header of drivers/scsi/advansys.c.
  17
  18        aha152x=        [HW,SCSI]
  19                        See Documentation/scsi/aha152x.txt.
  20
  21        aha1542=        [HW,SCSI]
  22                        Format: <portbase>[,<buson>,<busoff>[,<dmaspeed>]]
  23
  24        aic7xxx=        [HW,SCSI]
  25                        See Documentation/scsi/aic7xxx.txt.
  26
  27        aic79xx=        [HW,SCSI]
  28                        See Documentation/scsi/aic79xx.txt.
  29
  30        atascsi=        [HW,SCSI] Atari SCSI
  31
  32        BusLogic=       [HW,SCSI]
  33                        See drivers/scsi/BusLogic.c, comment before function
  34                        BusLogic_ParseDriverOptions().
  35
  36        dtc3181e=       [HW,SCSI]
  37
  38        eata=           [HW,SCSI]
  39
  40        fdomain=        [HW,SCSI]
  41                        See header of drivers/scsi/fdomain.c.
  42
  43        gdth=           [HW,SCSI]
  44                        See header of drivers/scsi/gdth.c.
  45
  46        gvp11=          [HW,SCSI]
  47
  48        in2000=         [HW,SCSI]
  49                        See header of drivers/scsi/in2000.c.
  50
  51        ips=            [HW,SCSI] Adaptec / IBM ServeRAID controller
  52                        See header of drivers/scsi/ips.c.
  53
  54        mac5380=        [HW,SCSI] Format:
  55                        <can_queue>,<cmd_per_lun>,<sg_tablesize>,<hostid>,<use_tags>
  56
  57        max_luns=       [SCSI] Maximum number of LUNs to probe.
  58                        Should be between 1 and 2^32-1.
  59
  60        max_report_luns=
  61                        [SCSI] Maximum number of LUNs received.
  62                        Should be between 1 and 16384.
  63
  64        NCR_D700=       [HW,SCSI]
  65                        See header of drivers/scsi/NCR_D700.c.
  66
  67        ncr5380=        [HW,SCSI]
  68
  69        ncr53c400=      [HW,SCSI]
  70
  71        ncr53c400a=     [HW,SCSI]
  72
  73        ncr53c406a=     [HW,SCSI]
  74
  75        ncr53c8xx=      [HW,SCSI]
  76
  77        nodisconnect    [HW,SCSI,M68K] Disables SCSI disconnects.
  78
  79        osst=           [HW,SCSI] SCSI Tape Driver
  80                        Format: <buffer_size>,<write_threshold>
  81                        See also Documentation/scsi/st.txt.
  82
  83        pas16=          [HW,SCSI]
  84                        See header of drivers/scsi/pas16.c.
  85
  86        scsi_debug_*=   [SCSI]
  87                        See drivers/scsi/scsi_debug.c.
  88
  89        scsi_default_dev_flags=
  90                        [SCSI] SCSI default device flags
  91                        Format: <integer>
  92
  93        scsi_dev_flags= [SCSI] Black/white list entry for vendor and model
  94                        Format: <vendor>:<model>:<flags>
  95                        (flags are integer value)
  96
  97        scsi_logging_level=     [SCSI] a bit mask of logging levels
  98                        See drivers/scsi/scsi_logging.h for bits.  Also
  99                        settable via sysctl at dev.scsi.logging_level
 100                        (/proc/sys/dev/scsi/logging_level).
 101                        There is also a nice 'scsi_logging_level' script in the
 102                        S390-tools package, available for download at
 103                        http://www-128.ibm.com/developerworks/linux/linux390/s390-tools-1.5.4.html
 104
 105        scsi_mod.scan=  [SCSI] sync (default) scans SCSI busses as they are
 106                        discovered.  async scans them in kernel threads,
 107                        allowing boot to proceed.  none ignores them, expecting
 108                        user space to do the scan.
 109
 110        sim710=         [SCSI,HW]
 111                        See header of drivers/scsi/sim710.c.
 112
 113        st=             [HW,SCSI] SCSI tape parameters (buffers, etc.)
 114                        See Documentation/scsi/st.txt.
 115
 116        sym53c416=      [HW,SCSI]
 117                        See header of drivers/scsi/sym53c416.c.
 118
 119        t128=           [HW,SCSI]
 120                        See header of drivers/scsi/t128.c.
 121
 122        tmscsim=        [HW,SCSI]
 123                        See comment before function dc390_setup() in
 124                        drivers/scsi/tmscsim.c.
 125
 126        u14-34f=        [HW,SCSI] UltraStor 14F/34F SCSI host adapter
 127                        See header of drivers/scsi/u14-34f.c.
 128
 129        wd33c93=        [HW,SCSI]
 130                        See header of drivers/scsi/wd33c93.c.
 131
 132        wd7000=         [HW,SCSI]
 133                        See header of drivers/scsi/wd7000.c.
 134