1
2
3
4
5
6
7
8
9
10
11
12
13
14#include <linux/kernel.h>
15#include <linux/init.h>
16#include <linux/platform_device.h>
17#include <linux/delay.h>
18#include <linux/pwm_backlight.h>
19#include <linux/input.h>
20#include <linux/gpio.h>
21#include <linux/gpio_keys.h>
22#include <linux/leds-lp3944.h>
23#include <linux/i2c/pxa-i2c.h>
24
25#include <media/soc_camera.h>
26
27#include <asm/setup.h>
28#include <asm/mach-types.h>
29#include <asm/mach/arch.h>
30
31#include <mach/pxa27x.h>
32#include <linux/platform_data/video-pxafb.h>
33#include <linux/platform_data/usb-ohci-pxa27x.h>
34#include <mach/hardware.h>
35#include <linux/platform_data/keypad-pxa27x.h>
36#include <linux/platform_data/camera-pxa.h>
37
38#include "devices.h"
39#include "generic.h"
40
41#define EZX_NR_IRQS (IRQ_BOARD_START + 24)
42
43#define GPIO12_A780_FLIP_LID 12
44#define GPIO15_A1200_FLIP_LID 15
45#define GPIO15_A910_FLIP_LID 15
46#define GPIO12_E680_LOCK_SWITCH 12
47#define GPIO15_E6_LOCK_SWITCH 15
48#define GPIO50_nCAM_EN 50
49#define GPIO19_GEN1_CAM_RST 19
50#define GPIO28_GEN2_CAM_RST 28
51
52static struct platform_pwm_backlight_data ezx_backlight_data = {
53 .pwm_id = 0,
54 .max_brightness = 1023,
55 .dft_brightness = 1023,
56 .pwm_period_ns = 78770,
57 .enable_gpio = -1,
58};
59
60static struct platform_device ezx_backlight_device = {
61 .name = "pwm-backlight",
62 .dev = {
63 .parent = &pxa27x_device_pwm0.dev,
64 .platform_data = &ezx_backlight_data,
65 },
66};
67
68static struct pxafb_mode_info mode_ezx_old = {
69 .pixclock = 150000,
70 .xres = 240,
71 .yres = 320,
72 .bpp = 16,
73 .hsync_len = 10,
74 .left_margin = 20,
75 .right_margin = 10,
76 .vsync_len = 2,
77 .upper_margin = 3,
78 .lower_margin = 2,
79 .sync = 0,
80};
81
82static struct pxafb_mach_info ezx_fb_info_1 = {
83 .modes = &mode_ezx_old,
84 .num_modes = 1,
85 .lcd_conn = LCD_COLOR_TFT_16BPP,
86};
87
88static struct pxafb_mode_info mode_72r89803y01 = {
89 .pixclock = 192308,
90 .xres = 240,
91 .yres = 320,
92 .bpp = 32,
93 .depth = 18,
94 .hsync_len = 10,
95 .left_margin = 20,
96 .right_margin = 10,
97 .vsync_len = 2,
98 .upper_margin = 3,
99 .lower_margin = 2,
100 .sync = 0,
101};
102
103static struct pxafb_mach_info ezx_fb_info_2 = {
104 .modes = &mode_72r89803y01,
105 .num_modes = 1,
106 .lcd_conn = LCD_COLOR_TFT_18BPP,
107};
108
109static struct platform_device *ezx_devices[] __initdata = {
110 &ezx_backlight_device,
111};
112
113static unsigned long ezx_pin_config[] __initdata = {
114
115 GPIO16_PWM0_OUT,
116
117
118 GPIO42_BTUART_RXD,
119 GPIO43_BTUART_TXD,
120 GPIO44_BTUART_CTS,
121 GPIO45_BTUART_RTS,
122
123
124 GPIO117_I2C_SCL,
125 GPIO118_I2C_SDA,
126
127
128 GPIO29_SSP1_SCLK,
129 GPIO25_SSP1_TXD,
130 GPIO26_SSP1_RXD,
131 GPIO24_GPIO,
132 GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,
133 GPIO4_GPIO | MFP_LPM_DRIVE_HIGH,
134 GPIO55_GPIO | MFP_LPM_DRIVE_HIGH,
135
136
137 GPIO32_MMC_CLK,
138 GPIO92_MMC_DAT_0,
139 GPIO109_MMC_DAT_1,
140 GPIO110_MMC_DAT_2,
141 GPIO111_MMC_DAT_3,
142 GPIO112_MMC_CMD,
143 GPIO11_GPIO,
144
145
146 GPIO34_USB_P2_2,
147 GPIO35_USB_P2_1,
148 GPIO36_USB_P2_4,
149 GPIO39_USB_P2_6,
150 GPIO40_USB_P2_5,
151 GPIO53_USB_P2_3,
152
153
154 GPIO30_USB_P3_2,
155 GPIO31_USB_P3_6,
156 GPIO90_USB_P3_5,
157 GPIO91_USB_P3_1,
158 GPIO56_USB_P3_4,
159 GPIO113_USB_P3_3,
160};
161
162#if defined(CONFIG_MACH_EZX_A780) || defined(CONFIG_MACH_EZX_E680)
163static unsigned long gen1_pin_config[] __initdata = {
164
165 GPIO12_GPIO | WAKEUP_ON_EDGE_BOTH,
166
167
168 GPIO14_GPIO | WAKEUP_ON_EDGE_RISE,
169 GPIO48_GPIO,
170 GPIO28_GPIO,
171
172
173 GPIO0_GPIO | WAKEUP_ON_EDGE_FALL,
174 GPIO57_GPIO | MFP_LPM_DRIVE_HIGH,
175 GPIO13_GPIO | WAKEUP_ON_EDGE_BOTH,
176 GPIO3_GPIO | WAKEUP_ON_EDGE_BOTH,
177 GPIO82_GPIO | MFP_LPM_DRIVE_HIGH,
178 GPIO99_GPIO | MFP_LPM_DRIVE_HIGH,
179
180
181 GPIO52_SSP3_SCLK,
182 GPIO83_SSP3_SFRM,
183 GPIO81_SSP3_TXD,
184 GPIO89_SSP3_RXD,
185
186
187 GPIO22_GPIO,
188 GPIO37_GPIO,
189 GPIO38_GPIO,
190 GPIO88_GPIO,
191
192
193 GPIO23_CIF_MCLK,
194 GPIO54_CIF_PCLK,
195 GPIO85_CIF_LV,
196 GPIO84_CIF_FV,
197 GPIO27_CIF_DD_0,
198 GPIO114_CIF_DD_1,
199 GPIO51_CIF_DD_2,
200 GPIO115_CIF_DD_3,
201 GPIO95_CIF_DD_4,
202 GPIO94_CIF_DD_5,
203 GPIO17_CIF_DD_6,
204 GPIO108_CIF_DD_7,
205 GPIO50_GPIO | MFP_LPM_DRIVE_HIGH,
206 GPIO19_GPIO | MFP_LPM_DRIVE_HIGH,
207
208
209 GPIO120_GPIO,
210 GPIO119_GPIO,
211 GPIO86_GPIO,
212 GPIO87_GPIO,
213};
214#endif
215
216#if defined(CONFIG_MACH_EZX_A1200) || defined(CONFIG_MACH_EZX_A910) || \
217 defined(CONFIG_MACH_EZX_E2) || defined(CONFIG_MACH_EZX_E6)
218static unsigned long gen2_pin_config[] __initdata = {
219
220 GPIO15_GPIO | WAKEUP_ON_EDGE_BOTH,
221
222
223 GPIO10_GPIO | WAKEUP_ON_EDGE_RISE,
224
225
226 GPIO13_GPIO | WAKEUP_ON_EDGE_RISE,
227 GPIO37_GPIO,
228 GPIO57_GPIO,
229
230
231 GPIO0_GPIO | WAKEUP_ON_EDGE_FALL,
232 GPIO96_GPIO | MFP_LPM_DRIVE_HIGH,
233 GPIO3_GPIO | WAKEUP_ON_EDGE_FALL,
234 GPIO116_GPIO | MFP_LPM_DRIVE_HIGH,
235 GPIO41_GPIO,
236
237
238 GPIO52_SSP3_SCLK,
239 GPIO83_SSP3_SFRM,
240 GPIO81_SSP3_TXD,
241 GPIO82_SSP3_RXD,
242
243
244 GPIO22_GPIO,
245 GPIO14_GPIO,
246 GPIO38_GPIO,
247 GPIO88_GPIO,
248
249
250 GPIO23_CIF_MCLK,
251 GPIO54_CIF_PCLK,
252 GPIO85_CIF_LV,
253 GPIO84_CIF_FV,
254 GPIO27_CIF_DD_0,
255 GPIO114_CIF_DD_1,
256 GPIO51_CIF_DD_2,
257 GPIO115_CIF_DD_3,
258 GPIO95_CIF_DD_4,
259 GPIO48_CIF_DD_5,
260 GPIO93_CIF_DD_6,
261 GPIO12_CIF_DD_7,
262 GPIO50_GPIO | MFP_LPM_DRIVE_HIGH,
263 GPIO28_GPIO | MFP_LPM_DRIVE_HIGH,
264 GPIO17_GPIO,
265};
266#endif
267
268#ifdef CONFIG_MACH_EZX_A780
269static unsigned long a780_pin_config[] __initdata = {
270
271 GPIO93_KP_DKIN_0 | WAKEUP_ON_LEVEL_HIGH,
272 GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
273 GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
274 GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
275 GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
276 GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
277 GPIO103_KP_MKOUT_0,
278 GPIO104_KP_MKOUT_1,
279 GPIO105_KP_MKOUT_2,
280 GPIO106_KP_MKOUT_3,
281 GPIO107_KP_MKOUT_4,
282
283
284 GPIO96_GPIO,
285};
286#endif
287
288#ifdef CONFIG_MACH_EZX_E680
289static unsigned long e680_pin_config[] __initdata = {
290
291 GPIO93_KP_DKIN_0 | WAKEUP_ON_LEVEL_HIGH,
292 GPIO96_KP_DKIN_3 | WAKEUP_ON_LEVEL_HIGH,
293 GPIO97_KP_DKIN_4 | WAKEUP_ON_LEVEL_HIGH,
294 GPIO98_KP_DKIN_5 | WAKEUP_ON_LEVEL_HIGH,
295 GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
296 GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
297 GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
298 GPIO103_KP_MKOUT_0,
299 GPIO104_KP_MKOUT_1,
300 GPIO105_KP_MKOUT_2,
301 GPIO106_KP_MKOUT_3,
302
303
304 GPIO79_GPIO,
305 GPIO80_GPIO,
306 GPIO78_GPIO,
307 GPIO33_GPIO,
308 GPIO15_GPIO,
309 GPIO49_GPIO,
310 GPIO18_GPIO,
311
312
313 GPIO46_GPIO,
314 GPIO47_GPIO,
315};
316#endif
317
318#ifdef CONFIG_MACH_EZX_A1200
319static unsigned long a1200_pin_config[] __initdata = {
320
321 GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
322 GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
323 GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
324 GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
325 GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
326 GPIO103_KP_MKOUT_0,
327 GPIO104_KP_MKOUT_1,
328 GPIO105_KP_MKOUT_2,
329 GPIO106_KP_MKOUT_3,
330 GPIO107_KP_MKOUT_4,
331 GPIO108_KP_MKOUT_5,
332};
333#endif
334
335#ifdef CONFIG_MACH_EZX_A910
336static unsigned long a910_pin_config[] __initdata = {
337
338 GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
339 GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
340 GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
341 GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
342 GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
343 GPIO103_KP_MKOUT_0,
344 GPIO104_KP_MKOUT_1,
345 GPIO105_KP_MKOUT_2,
346 GPIO106_KP_MKOUT_3,
347 GPIO107_KP_MKOUT_4,
348 GPIO108_KP_MKOUT_5,
349
350
351 GPIO89_GPIO,
352 GPIO33_GPIO,
353 GPIO94_GPIO | WAKEUP_ON_LEVEL_HIGH,
354
355
356 GPIO20_GPIO,
357};
358#endif
359
360#ifdef CONFIG_MACH_EZX_E2
361static unsigned long e2_pin_config[] __initdata = {
362
363 GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
364 GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
365 GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
366 GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
367 GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
368 GPIO103_KP_MKOUT_0,
369 GPIO104_KP_MKOUT_1,
370 GPIO105_KP_MKOUT_2,
371 GPIO106_KP_MKOUT_3,
372 GPIO107_KP_MKOUT_4,
373 GPIO108_KP_MKOUT_5,
374};
375#endif
376
377#ifdef CONFIG_MACH_EZX_E6
378static unsigned long e6_pin_config[] __initdata = {
379
380 GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
381 GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
382 GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
383 GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
384 GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
385 GPIO103_KP_MKOUT_0,
386 GPIO104_KP_MKOUT_1,
387 GPIO105_KP_MKOUT_2,
388 GPIO106_KP_MKOUT_3,
389 GPIO107_KP_MKOUT_4,
390 GPIO108_KP_MKOUT_5,
391};
392#endif
393
394
395#ifdef CONFIG_MACH_EZX_A780
396static const unsigned int a780_key_map[] = {
397 KEY(0, 0, KEY_SEND),
398 KEY(0, 1, KEY_BACK),
399 KEY(0, 2, KEY_END),
400 KEY(0, 3, KEY_PAGEUP),
401 KEY(0, 4, KEY_UP),
402
403 KEY(1, 0, KEY_NUMERIC_1),
404 KEY(1, 1, KEY_NUMERIC_2),
405 KEY(1, 2, KEY_NUMERIC_3),
406 KEY(1, 3, KEY_SELECT),
407 KEY(1, 4, KEY_KPENTER),
408
409 KEY(2, 0, KEY_NUMERIC_4),
410 KEY(2, 1, KEY_NUMERIC_5),
411 KEY(2, 2, KEY_NUMERIC_6),
412 KEY(2, 3, KEY_RECORD),
413 KEY(2, 4, KEY_LEFT),
414
415 KEY(3, 0, KEY_NUMERIC_7),
416 KEY(3, 1, KEY_NUMERIC_8),
417 KEY(3, 2, KEY_NUMERIC_9),
418 KEY(3, 3, KEY_HOME),
419 KEY(3, 4, KEY_RIGHT),
420
421 KEY(4, 0, KEY_NUMERIC_STAR),
422 KEY(4, 1, KEY_NUMERIC_0),
423 KEY(4, 2, KEY_NUMERIC_POUND),
424 KEY(4, 3, KEY_PAGEDOWN),
425 KEY(4, 4, KEY_DOWN),
426};
427
428static struct matrix_keymap_data a780_matrix_keymap_data = {
429 .keymap = a780_key_map,
430 .keymap_size = ARRAY_SIZE(a780_key_map),
431};
432
433static struct pxa27x_keypad_platform_data a780_keypad_platform_data = {
434 .matrix_key_rows = 5,
435 .matrix_key_cols = 5,
436 .matrix_keymap_data = &a780_matrix_keymap_data,
437
438 .direct_key_map = { KEY_CAMERA },
439 .direct_key_num = 1,
440
441 .debounce_interval = 30,
442};
443#endif
444
445#ifdef CONFIG_MACH_EZX_E680
446static const unsigned int e680_key_map[] = {
447 KEY(0, 0, KEY_UP),
448 KEY(0, 1, KEY_RIGHT),
449 KEY(0, 2, KEY_RESERVED),
450 KEY(0, 3, KEY_SEND),
451
452 KEY(1, 0, KEY_DOWN),
453 KEY(1, 1, KEY_LEFT),
454 KEY(1, 2, KEY_PAGEUP),
455 KEY(1, 3, KEY_PAGEDOWN),
456
457 KEY(2, 0, KEY_RESERVED),
458 KEY(2, 1, KEY_RESERVED),
459 KEY(2, 2, KEY_RESERVED),
460 KEY(2, 3, KEY_KPENTER),
461};
462
463static struct matrix_keymap_data e680_matrix_keymap_data = {
464 .keymap = e680_key_map,
465 .keymap_size = ARRAY_SIZE(e680_key_map),
466};
467
468static struct pxa27x_keypad_platform_data e680_keypad_platform_data = {
469 .matrix_key_rows = 3,
470 .matrix_key_cols = 4,
471 .matrix_keymap_data = &e680_matrix_keymap_data,
472
473 .direct_key_map = {
474 KEY_CAMERA,
475 KEY_RESERVED,
476 KEY_RESERVED,
477 KEY_F1,
478 KEY_CANCEL,
479 KEY_F2,
480 },
481 .direct_key_num = 6,
482
483 .debounce_interval = 30,
484};
485#endif
486
487#ifdef CONFIG_MACH_EZX_A1200
488static const unsigned int a1200_key_map[] = {
489 KEY(0, 0, KEY_RESERVED),
490 KEY(0, 1, KEY_RIGHT),
491 KEY(0, 2, KEY_PAGEDOWN),
492 KEY(0, 3, KEY_RESERVED),
493 KEY(0, 4, KEY_RESERVED),
494 KEY(0, 5, KEY_RESERVED),
495
496 KEY(1, 0, KEY_RESERVED),
497 KEY(1, 1, KEY_DOWN),
498 KEY(1, 2, KEY_CAMERA),
499 KEY(1, 3, KEY_RESERVED),
500 KEY(1, 4, KEY_RESERVED),
501 KEY(1, 5, KEY_RESERVED),
502
503 KEY(2, 0, KEY_RESERVED),
504 KEY(2, 1, KEY_KPENTER),
505 KEY(2, 2, KEY_RECORD),
506 KEY(2, 3, KEY_RESERVED),
507 KEY(2, 4, KEY_RESERVED),
508 KEY(2, 5, KEY_SELECT),
509
510 KEY(3, 0, KEY_RESERVED),
511 KEY(3, 1, KEY_UP),
512 KEY(3, 2, KEY_SEND),
513 KEY(3, 3, KEY_RESERVED),
514 KEY(3, 4, KEY_RESERVED),
515 KEY(3, 5, KEY_RESERVED),
516
517 KEY(4, 0, KEY_RESERVED),
518 KEY(4, 1, KEY_LEFT),
519 KEY(4, 2, KEY_PAGEUP),
520 KEY(4, 3, KEY_RESERVED),
521 KEY(4, 4, KEY_RESERVED),
522 KEY(4, 5, KEY_RESERVED),
523};
524
525static struct matrix_keymap_data a1200_matrix_keymap_data = {
526 .keymap = a1200_key_map,
527 .keymap_size = ARRAY_SIZE(a1200_key_map),
528};
529
530static struct pxa27x_keypad_platform_data a1200_keypad_platform_data = {
531 .matrix_key_rows = 5,
532 .matrix_key_cols = 6,
533 .matrix_keymap_data = &a1200_matrix_keymap_data,
534
535 .debounce_interval = 30,
536};
537#endif
538
539#ifdef CONFIG_MACH_EZX_E6
540static const unsigned int e6_key_map[] = {
541 KEY(0, 0, KEY_RESERVED),
542 KEY(0, 1, KEY_RIGHT),
543 KEY(0, 2, KEY_PAGEDOWN),
544 KEY(0, 3, KEY_RESERVED),
545 KEY(0, 4, KEY_RESERVED),
546 KEY(0, 5, KEY_NEXTSONG),
547
548 KEY(1, 0, KEY_RESERVED),
549 KEY(1, 1, KEY_DOWN),
550 KEY(1, 2, KEY_PROG1),
551 KEY(1, 3, KEY_RESERVED),
552 KEY(1, 4, KEY_RESERVED),
553 KEY(1, 5, KEY_RESERVED),
554
555 KEY(2, 0, KEY_RESERVED),
556 KEY(2, 1, KEY_ENTER),
557 KEY(2, 2, KEY_CAMERA),
558 KEY(2, 3, KEY_RESERVED),
559 KEY(2, 4, KEY_RESERVED),
560 KEY(2, 5, KEY_WWW),
561
562 KEY(3, 0, KEY_RESERVED),
563 KEY(3, 1, KEY_UP),
564 KEY(3, 2, KEY_SEND),
565 KEY(3, 3, KEY_RESERVED),
566 KEY(3, 4, KEY_RESERVED),
567 KEY(3, 5, KEY_PLAYPAUSE),
568
569 KEY(4, 0, KEY_RESERVED),
570 KEY(4, 1, KEY_LEFT),
571 KEY(4, 2, KEY_PAGEUP),
572 KEY(4, 3, KEY_RESERVED),
573 KEY(4, 4, KEY_RESERVED),
574 KEY(4, 5, KEY_PREVIOUSSONG),
575};
576
577static struct matrix_keymap_data e6_keymap_data = {
578 .keymap = e6_key_map,
579 .keymap_size = ARRAY_SIZE(e6_key_map),
580};
581
582static struct pxa27x_keypad_platform_data e6_keypad_platform_data = {
583 .matrix_key_rows = 5,
584 .matrix_key_cols = 6,
585 .matrix_keymap_data = &e6_keymap_data,
586
587 .debounce_interval = 30,
588};
589#endif
590
591#ifdef CONFIG_MACH_EZX_A910
592static const unsigned int a910_key_map[] = {
593 KEY(0, 0, KEY_NUMERIC_6),
594 KEY(0, 1, KEY_RIGHT),
595 KEY(0, 2, KEY_PAGEDOWN),
596 KEY(0, 3, KEY_KPENTER),
597 KEY(0, 4, KEY_NUMERIC_5),
598 KEY(0, 5, KEY_CAMERA),
599
600 KEY(1, 0, KEY_NUMERIC_8),
601 KEY(1, 1, KEY_DOWN),
602 KEY(1, 2, KEY_RESERVED),
603 KEY(1, 3, KEY_F1),
604 KEY(1, 4, KEY_NUMERIC_STAR),
605 KEY(1, 5, KEY_RESERVED),
606
607 KEY(2, 0, KEY_NUMERIC_7),
608 KEY(2, 1, KEY_NUMERIC_9),
609 KEY(2, 2, KEY_RECORD),
610 KEY(2, 3, KEY_F2),
611 KEY(2, 4, KEY_BACK),
612 KEY(2, 5, KEY_SELECT),
613
614 KEY(3, 0, KEY_NUMERIC_2),
615 KEY(3, 1, KEY_UP),
616 KEY(3, 2, KEY_SEND),
617 KEY(3, 3, KEY_NUMERIC_0),
618 KEY(3, 4, KEY_NUMERIC_1),
619 KEY(3, 5, KEY_RECORD),
620
621 KEY(4, 0, KEY_NUMERIC_4),
622 KEY(4, 1, KEY_LEFT),
623 KEY(4, 2, KEY_PAGEUP),
624 KEY(4, 3, KEY_NUMERIC_POUND),
625 KEY(4, 4, KEY_NUMERIC_3),
626 KEY(4, 5, KEY_RESERVED),
627};
628
629static struct matrix_keymap_data a910_matrix_keymap_data = {
630 .keymap = a910_key_map,
631 .keymap_size = ARRAY_SIZE(a910_key_map),
632};
633
634static struct pxa27x_keypad_platform_data a910_keypad_platform_data = {
635 .matrix_key_rows = 5,
636 .matrix_key_cols = 6,
637 .matrix_keymap_data = &a910_matrix_keymap_data,
638
639 .debounce_interval = 30,
640};
641#endif
642
643#ifdef CONFIG_MACH_EZX_E2
644static const unsigned int e2_key_map[] = {
645 KEY(0, 0, KEY_NUMERIC_6),
646 KEY(0, 1, KEY_RIGHT),
647 KEY(0, 2, KEY_NUMERIC_9),
648 KEY(0, 3, KEY_NEXTSONG),
649 KEY(0, 4, KEY_NUMERIC_5),
650 KEY(0, 5, KEY_F1),
651
652 KEY(1, 0, KEY_NUMERIC_8),
653 KEY(1, 1, KEY_DOWN),
654 KEY(1, 2, KEY_RESERVED),
655 KEY(1, 3, KEY_PAGEUP),
656 KEY(1, 4, KEY_NUMERIC_STAR),
657 KEY(1, 5, KEY_F2),
658
659 KEY(2, 0, KEY_NUMERIC_7),
660 KEY(2, 1, KEY_KPENTER),
661 KEY(2, 2, KEY_RECORD),
662 KEY(2, 3, KEY_PAGEDOWN),
663 KEY(2, 4, KEY_BACK),
664 KEY(2, 5, KEY_NUMERIC_0),
665
666 KEY(3, 0, KEY_NUMERIC_2),
667 KEY(3, 1, KEY_UP),
668 KEY(3, 2, KEY_SEND),
669 KEY(3, 3, KEY_PLAYPAUSE),
670 KEY(3, 4, KEY_NUMERIC_1),
671 KEY(3, 5, KEY_SOUND),
672
673 KEY(4, 0, KEY_NUMERIC_4),
674 KEY(4, 1, KEY_LEFT),
675 KEY(4, 2, KEY_NUMERIC_POUND),
676 KEY(4, 3, KEY_PREVIOUSSONG),
677 KEY(4, 4, KEY_NUMERIC_3),
678 KEY(4, 5, KEY_RESERVED),
679};
680
681static struct matrix_keymap_data e2_matrix_keymap_data = {
682 .keymap = e2_key_map,
683 .keymap_size = ARRAY_SIZE(e2_key_map),
684};
685
686static struct pxa27x_keypad_platform_data e2_keypad_platform_data = {
687 .matrix_key_rows = 5,
688 .matrix_key_cols = 6,
689 .matrix_keymap_data = &e2_matrix_keymap_data,
690
691 .debounce_interval = 30,
692};
693#endif
694
695#ifdef CONFIG_MACH_EZX_A780
696
697static struct gpio_keys_button a780_buttons[] = {
698 [0] = {
699 .code = SW_LID,
700 .gpio = GPIO12_A780_FLIP_LID,
701 .active_low = 0,
702 .desc = "A780 flip lid",
703 .type = EV_SW,
704 .wakeup = 1,
705 },
706};
707
708static struct gpio_keys_platform_data a780_gpio_keys_platform_data = {
709 .buttons = a780_buttons,
710 .nbuttons = ARRAY_SIZE(a780_buttons),
711};
712
713static struct platform_device a780_gpio_keys = {
714 .name = "gpio-keys",
715 .id = -1,
716 .dev = {
717 .platform_data = &a780_gpio_keys_platform_data,
718 },
719};
720
721
722static int a780_camera_init(void)
723{
724 int err;
725
726
727
728
729
730 err = gpio_request(GPIO50_nCAM_EN, "nCAM_EN");
731 if (err) {
732 pr_err("%s: Failed to request nCAM_EN\n", __func__);
733 goto fail;
734 }
735
736 err = gpio_request(GPIO19_GEN1_CAM_RST, "CAM_RST");
737 if (err) {
738 pr_err("%s: Failed to request CAM_RST\n", __func__);
739 goto fail_gpio_cam_rst;
740 }
741
742 gpio_direction_output(GPIO50_nCAM_EN, 1);
743 gpio_direction_output(GPIO19_GEN1_CAM_RST, 0);
744
745 return 0;
746
747fail_gpio_cam_rst:
748 gpio_free(GPIO50_nCAM_EN);
749fail:
750 return err;
751}
752
753static int a780_camera_power(struct device *dev, int on)
754{
755 gpio_set_value(GPIO50_nCAM_EN, !on);
756 return 0;
757}
758
759static int a780_camera_reset(struct device *dev)
760{
761 gpio_set_value(GPIO19_GEN1_CAM_RST, 0);
762 msleep(10);
763 gpio_set_value(GPIO19_GEN1_CAM_RST, 1);
764
765 return 0;
766}
767
768struct pxacamera_platform_data a780_pxacamera_platform_data = {
769 .flags = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
770 PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
771 .mclk_10khz = 5000,
772};
773
774static struct i2c_board_info a780_camera_i2c_board_info = {
775 I2C_BOARD_INFO("mt9m111", 0x5d),
776};
777
778static struct soc_camera_link a780_iclink = {
779 .bus_id = 0,
780 .flags = SOCAM_SENSOR_INVERT_PCLK,
781 .i2c_adapter_id = 0,
782 .board_info = &a780_camera_i2c_board_info,
783 .power = a780_camera_power,
784 .reset = a780_camera_reset,
785};
786
787static struct platform_device a780_camera = {
788 .name = "soc-camera-pdrv",
789 .id = 0,
790 .dev = {
791 .platform_data = &a780_iclink,
792 },
793};
794
795static struct platform_device *a780_devices[] __initdata = {
796 &a780_gpio_keys,
797};
798
799static void __init a780_init(void)
800{
801 pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
802 pxa2xx_mfp_config(ARRAY_AND_SIZE(gen1_pin_config));
803 pxa2xx_mfp_config(ARRAY_AND_SIZE(a780_pin_config));
804
805 pxa_set_ffuart_info(NULL);
806 pxa_set_btuart_info(NULL);
807 pxa_set_stuart_info(NULL);
808
809 pxa_set_i2c_info(NULL);
810
811 pxa_set_fb_info(NULL, &ezx_fb_info_1);
812
813 pxa_set_keypad_info(&a780_keypad_platform_data);
814
815 if (a780_camera_init() == 0) {
816 pxa_set_camera_info(&a780_pxacamera_platform_data);
817 platform_device_register(&a780_camera);
818 }
819
820 platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
821 platform_add_devices(ARRAY_AND_SIZE(a780_devices));
822}
823
824MACHINE_START(EZX_A780, "Motorola EZX A780")
825 .atag_offset = 0x100,
826 .map_io = pxa27x_map_io,
827 .nr_irqs = EZX_NR_IRQS,
828 .init_irq = pxa27x_init_irq,
829 .handle_irq = pxa27x_handle_irq,
830 .init_time = pxa_timer_init,
831 .init_machine = a780_init,
832 .restart = pxa_restart,
833MACHINE_END
834#endif
835
836#ifdef CONFIG_MACH_EZX_E680
837
838static struct gpio_keys_button e680_buttons[] = {
839 [0] = {
840 .code = KEY_SCREENLOCK,
841 .gpio = GPIO12_E680_LOCK_SWITCH,
842 .active_low = 0,
843 .desc = "E680 lock switch",
844 .type = EV_KEY,
845 .wakeup = 1,
846 },
847};
848
849static struct gpio_keys_platform_data e680_gpio_keys_platform_data = {
850 .buttons = e680_buttons,
851 .nbuttons = ARRAY_SIZE(e680_buttons),
852};
853
854static struct platform_device e680_gpio_keys = {
855 .name = "gpio-keys",
856 .id = -1,
857 .dev = {
858 .platform_data = &e680_gpio_keys_platform_data,
859 },
860};
861
862static struct i2c_board_info __initdata e680_i2c_board_info[] = {
863 { I2C_BOARD_INFO("tea5767", 0x81) },
864};
865
866static struct platform_device *e680_devices[] __initdata = {
867 &e680_gpio_keys,
868};
869
870static void __init e680_init(void)
871{
872 pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
873 pxa2xx_mfp_config(ARRAY_AND_SIZE(gen1_pin_config));
874 pxa2xx_mfp_config(ARRAY_AND_SIZE(e680_pin_config));
875
876 pxa_set_ffuart_info(NULL);
877 pxa_set_btuart_info(NULL);
878 pxa_set_stuart_info(NULL);
879
880 pxa_set_i2c_info(NULL);
881 i2c_register_board_info(0, ARRAY_AND_SIZE(e680_i2c_board_info));
882
883 pxa_set_fb_info(NULL, &ezx_fb_info_1);
884
885 pxa_set_keypad_info(&e680_keypad_platform_data);
886
887 platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
888 platform_add_devices(ARRAY_AND_SIZE(e680_devices));
889}
890
891MACHINE_START(EZX_E680, "Motorola EZX E680")
892 .atag_offset = 0x100,
893 .map_io = pxa27x_map_io,
894 .nr_irqs = EZX_NR_IRQS,
895 .init_irq = pxa27x_init_irq,
896 .handle_irq = pxa27x_handle_irq,
897 .init_time = pxa_timer_init,
898 .init_machine = e680_init,
899 .restart = pxa_restart,
900MACHINE_END
901#endif
902
903#ifdef CONFIG_MACH_EZX_A1200
904
905static struct gpio_keys_button a1200_buttons[] = {
906 [0] = {
907 .code = SW_LID,
908 .gpio = GPIO15_A1200_FLIP_LID,
909 .active_low = 0,
910 .desc = "A1200 flip lid",
911 .type = EV_SW,
912 .wakeup = 1,
913 },
914};
915
916static struct gpio_keys_platform_data a1200_gpio_keys_platform_data = {
917 .buttons = a1200_buttons,
918 .nbuttons = ARRAY_SIZE(a1200_buttons),
919};
920
921static struct platform_device a1200_gpio_keys = {
922 .name = "gpio-keys",
923 .id = -1,
924 .dev = {
925 .platform_data = &a1200_gpio_keys_platform_data,
926 },
927};
928
929static struct i2c_board_info __initdata a1200_i2c_board_info[] = {
930 { I2C_BOARD_INFO("tea5767", 0x81) },
931};
932
933static struct platform_device *a1200_devices[] __initdata = {
934 &a1200_gpio_keys,
935};
936
937static void __init a1200_init(void)
938{
939 pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
940 pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
941 pxa2xx_mfp_config(ARRAY_AND_SIZE(a1200_pin_config));
942
943 pxa_set_ffuart_info(NULL);
944 pxa_set_btuart_info(NULL);
945 pxa_set_stuart_info(NULL);
946
947 pxa_set_i2c_info(NULL);
948 i2c_register_board_info(0, ARRAY_AND_SIZE(a1200_i2c_board_info));
949
950 pxa_set_fb_info(NULL, &ezx_fb_info_2);
951
952 pxa_set_keypad_info(&a1200_keypad_platform_data);
953
954 platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
955 platform_add_devices(ARRAY_AND_SIZE(a1200_devices));
956}
957
958MACHINE_START(EZX_A1200, "Motorola EZX A1200")
959 .atag_offset = 0x100,
960 .map_io = pxa27x_map_io,
961 .nr_irqs = EZX_NR_IRQS,
962 .init_irq = pxa27x_init_irq,
963 .handle_irq = pxa27x_handle_irq,
964 .init_time = pxa_timer_init,
965 .init_machine = a1200_init,
966 .restart = pxa_restart,
967MACHINE_END
968#endif
969
970#ifdef CONFIG_MACH_EZX_A910
971
972static struct gpio_keys_button a910_buttons[] = {
973 [0] = {
974 .code = SW_LID,
975 .gpio = GPIO15_A910_FLIP_LID,
976 .active_low = 0,
977 .desc = "A910 flip lid",
978 .type = EV_SW,
979 .wakeup = 1,
980 },
981};
982
983static struct gpio_keys_platform_data a910_gpio_keys_platform_data = {
984 .buttons = a910_buttons,
985 .nbuttons = ARRAY_SIZE(a910_buttons),
986};
987
988static struct platform_device a910_gpio_keys = {
989 .name = "gpio-keys",
990 .id = -1,
991 .dev = {
992 .platform_data = &a910_gpio_keys_platform_data,
993 },
994};
995
996
997static int a910_camera_init(void)
998{
999 int err;
1000
1001
1002
1003
1004
1005 err = gpio_request(GPIO50_nCAM_EN, "nCAM_EN");
1006 if (err) {
1007 pr_err("%s: Failed to request nCAM_EN\n", __func__);
1008 goto fail;
1009 }
1010
1011 err = gpio_request(GPIO28_GEN2_CAM_RST, "CAM_RST");
1012 if (err) {
1013 pr_err("%s: Failed to request CAM_RST\n", __func__);
1014 goto fail_gpio_cam_rst;
1015 }
1016
1017 gpio_direction_output(GPIO50_nCAM_EN, 1);
1018 gpio_direction_output(GPIO28_GEN2_CAM_RST, 0);
1019
1020 return 0;
1021
1022fail_gpio_cam_rst:
1023 gpio_free(GPIO50_nCAM_EN);
1024fail:
1025 return err;
1026}
1027
1028static int a910_camera_power(struct device *dev, int on)
1029{
1030 gpio_set_value(GPIO50_nCAM_EN, !on);
1031 return 0;
1032}
1033
1034static int a910_camera_reset(struct device *dev)
1035{
1036 gpio_set_value(GPIO28_GEN2_CAM_RST, 0);
1037 msleep(10);
1038 gpio_set_value(GPIO28_GEN2_CAM_RST, 1);
1039
1040 return 0;
1041}
1042
1043struct pxacamera_platform_data a910_pxacamera_platform_data = {
1044 .flags = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
1045 PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
1046 .mclk_10khz = 5000,
1047};
1048
1049static struct i2c_board_info a910_camera_i2c_board_info = {
1050 I2C_BOARD_INFO("mt9m111", 0x5d),
1051};
1052
1053static struct soc_camera_link a910_iclink = {
1054 .bus_id = 0,
1055 .i2c_adapter_id = 0,
1056 .board_info = &a910_camera_i2c_board_info,
1057 .power = a910_camera_power,
1058 .reset = a910_camera_reset,
1059};
1060
1061static struct platform_device a910_camera = {
1062 .name = "soc-camera-pdrv",
1063 .id = 0,
1064 .dev = {
1065 .platform_data = &a910_iclink,
1066 },
1067};
1068
1069
1070static struct lp3944_platform_data a910_lp3944_leds = {
1071 .leds_size = LP3944_LEDS_MAX,
1072 .leds = {
1073 [0] = {
1074 .name = "a910:red:",
1075 .status = LP3944_LED_STATUS_OFF,
1076 .type = LP3944_LED_TYPE_LED,
1077 },
1078 [1] = {
1079 .name = "a910:green:",
1080 .status = LP3944_LED_STATUS_OFF,
1081 .type = LP3944_LED_TYPE_LED,
1082 },
1083 [2] {
1084 .name = "a910:blue:",
1085 .status = LP3944_LED_STATUS_OFF,
1086 .type = LP3944_LED_TYPE_LED,
1087 },
1088
1089 [3] = {
1090 .name = "a910::cli_display",
1091 .status = LP3944_LED_STATUS_OFF,
1092 .type = LP3944_LED_TYPE_LED_INVERTED
1093 },
1094 [4] = {
1095 .name = "a910::main_display",
1096 .status = LP3944_LED_STATUS_ON,
1097 .type = LP3944_LED_TYPE_LED_INVERTED
1098 },
1099 [5] = { .type = LP3944_LED_TYPE_NONE },
1100 [6] = {
1101 .name = "a910::torch",
1102 .status = LP3944_LED_STATUS_OFF,
1103 .type = LP3944_LED_TYPE_LED,
1104 },
1105 [7] = {
1106 .name = "a910::flash",
1107 .status = LP3944_LED_STATUS_OFF,
1108 .type = LP3944_LED_TYPE_LED_INVERTED,
1109 },
1110 },
1111};
1112
1113static struct i2c_board_info __initdata a910_i2c_board_info[] = {
1114 {
1115 I2C_BOARD_INFO("lp3944", 0x60),
1116 .platform_data = &a910_lp3944_leds,
1117 },
1118};
1119
1120static struct platform_device *a910_devices[] __initdata = {
1121 &a910_gpio_keys,
1122};
1123
1124static void __init a910_init(void)
1125{
1126 pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
1127 pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
1128 pxa2xx_mfp_config(ARRAY_AND_SIZE(a910_pin_config));
1129
1130 pxa_set_ffuart_info(NULL);
1131 pxa_set_btuart_info(NULL);
1132 pxa_set_stuart_info(NULL);
1133
1134 pxa_set_i2c_info(NULL);
1135 i2c_register_board_info(0, ARRAY_AND_SIZE(a910_i2c_board_info));
1136
1137 pxa_set_fb_info(NULL, &ezx_fb_info_2);
1138
1139 pxa_set_keypad_info(&a910_keypad_platform_data);
1140
1141 if (a910_camera_init() == 0) {
1142 pxa_set_camera_info(&a910_pxacamera_platform_data);
1143 platform_device_register(&a910_camera);
1144 }
1145
1146 platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
1147 platform_add_devices(ARRAY_AND_SIZE(a910_devices));
1148}
1149
1150MACHINE_START(EZX_A910, "Motorola EZX A910")
1151 .atag_offset = 0x100,
1152 .map_io = pxa27x_map_io,
1153 .nr_irqs = EZX_NR_IRQS,
1154 .init_irq = pxa27x_init_irq,
1155 .handle_irq = pxa27x_handle_irq,
1156 .init_time = pxa_timer_init,
1157 .init_machine = a910_init,
1158 .restart = pxa_restart,
1159MACHINE_END
1160#endif
1161
1162#ifdef CONFIG_MACH_EZX_E6
1163
1164static struct gpio_keys_button e6_buttons[] = {
1165 [0] = {
1166 .code = KEY_SCREENLOCK,
1167 .gpio = GPIO15_E6_LOCK_SWITCH,
1168 .active_low = 0,
1169 .desc = "E6 lock switch",
1170 .type = EV_KEY,
1171 .wakeup = 1,
1172 },
1173};
1174
1175static struct gpio_keys_platform_data e6_gpio_keys_platform_data = {
1176 .buttons = e6_buttons,
1177 .nbuttons = ARRAY_SIZE(e6_buttons),
1178};
1179
1180static struct platform_device e6_gpio_keys = {
1181 .name = "gpio-keys",
1182 .id = -1,
1183 .dev = {
1184 .platform_data = &e6_gpio_keys_platform_data,
1185 },
1186};
1187
1188static struct i2c_board_info __initdata e6_i2c_board_info[] = {
1189 { I2C_BOARD_INFO("tea5767", 0x81) },
1190};
1191
1192static struct platform_device *e6_devices[] __initdata = {
1193 &e6_gpio_keys,
1194};
1195
1196static void __init e6_init(void)
1197{
1198 pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
1199 pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
1200 pxa2xx_mfp_config(ARRAY_AND_SIZE(e6_pin_config));
1201
1202 pxa_set_ffuart_info(NULL);
1203 pxa_set_btuart_info(NULL);
1204 pxa_set_stuart_info(NULL);
1205
1206 pxa_set_i2c_info(NULL);
1207 i2c_register_board_info(0, ARRAY_AND_SIZE(e6_i2c_board_info));
1208
1209 pxa_set_fb_info(NULL, &ezx_fb_info_2);
1210
1211 pxa_set_keypad_info(&e6_keypad_platform_data);
1212
1213 platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
1214 platform_add_devices(ARRAY_AND_SIZE(e6_devices));
1215}
1216
1217MACHINE_START(EZX_E6, "Motorola EZX E6")
1218 .atag_offset = 0x100,
1219 .map_io = pxa27x_map_io,
1220 .nr_irqs = EZX_NR_IRQS,
1221 .init_irq = pxa27x_init_irq,
1222 .handle_irq = pxa27x_handle_irq,
1223 .init_time = pxa_timer_init,
1224 .init_machine = e6_init,
1225 .restart = pxa_restart,
1226MACHINE_END
1227#endif
1228
1229#ifdef CONFIG_MACH_EZX_E2
1230static struct i2c_board_info __initdata e2_i2c_board_info[] = {
1231 { I2C_BOARD_INFO("tea5767", 0x81) },
1232};
1233
1234static struct platform_device *e2_devices[] __initdata = {
1235};
1236
1237static void __init e2_init(void)
1238{
1239 pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
1240 pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
1241 pxa2xx_mfp_config(ARRAY_AND_SIZE(e2_pin_config));
1242
1243 pxa_set_ffuart_info(NULL);
1244 pxa_set_btuart_info(NULL);
1245 pxa_set_stuart_info(NULL);
1246
1247 pxa_set_i2c_info(NULL);
1248 i2c_register_board_info(0, ARRAY_AND_SIZE(e2_i2c_board_info));
1249
1250 pxa_set_fb_info(NULL, &ezx_fb_info_2);
1251
1252 pxa_set_keypad_info(&e2_keypad_platform_data);
1253
1254 platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
1255 platform_add_devices(ARRAY_AND_SIZE(e2_devices));
1256}
1257
1258MACHINE_START(EZX_E2, "Motorola EZX E2")
1259 .atag_offset = 0x100,
1260 .map_io = pxa27x_map_io,
1261 .nr_irqs = EZX_NR_IRQS,
1262 .init_irq = pxa27x_init_irq,
1263 .handle_irq = pxa27x_handle_irq,
1264 .init_time = pxa_timer_init,
1265 .init_machine = e2_init,
1266 .restart = pxa_restart,
1267MACHINE_END
1268#endif
1269
