/*
 * GE IMP3A Board Setup
 *
 * Author Martyn Welch <martyn.welch@ge.com>
 *
 * Copyright 2010 GE Intelligent Platforms Embedded Systems, Inc.
 *
 * This program is free software; you can redistribute  it and/or modify it
 * under  the terms of  the GNU General  Public License as published by the
 * Free Software Foundation;  either version 2 of the  License, or (at your
 * option) any later version.
 *
 * Based on: mpc85xx_ds.c (MPC85xx DS Board Setup)
 * Copyright 2007 Freescale Semiconductor Inc.
 */

#include <linux/stddef.h>
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/kdev_t.h>
#include <linux/delay.h>
#include <linux/seq_file.h>
#include <linux/interrupt.h>
#include <linux/of_platform.h>

#include <asm/time.h>
#include <asm/machdep.h>
#include <asm/pci-bridge.h>
#include <mm/mmu_decl.h>
#include <asm/prom.h>
#include <asm/udbg.h>
#include <asm/mpic.h>
#include <asm/swiotlb.h>
#include <asm/nvram.h>

#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
#include "smp.h"

#include "mpc85xx.h"
#include <sysdev/ge/ge_pic.h>

void __iomem *imp3a_regs;

void __init ge_imp3a_pic_init(void)
{
        struct mpic *mpic;
        struct device_node *np;
        struct device_node *cascade_node = NULL;
        unsigned long root = of_get_flat_dt_root();

        if (of_flat_dt_is_compatible(root, "fsl,MPC8572DS-CAMP")) {
                mpic = mpic_alloc(NULL, 0,
                        MPIC_NO_RESET |
                        MPIC_BIG_ENDIAN |
                        MPIC_SINGLE_DEST_CPU,
                        0, 256, " OpenPIC  ");
        } else {
                mpic = mpic_alloc(NULL, 0,
                          MPIC_BIG_ENDIAN |
                          MPIC_SINGLE_DEST_CPU,
                        0, 256, " OpenPIC  ");
        }

        BUG_ON(mpic == NULL);
        mpic_init(mpic);
        /*
         * There is a simple interrupt handler in the main FPGA, this needs
         * to be cascaded into the MPIC
         */
        for_each_node_by_type(np, "interrupt-controller")
                if (of_device_is_compatible(np, "gef,fpga-pic-1.00")) {
                        cascade_node = np;
                        break;
                }

        if (cascade_node == NULL) {
                printk(KERN_WARNING "IMP3A: No FPGA PIC\n");
                return;
        }

        gef_pic_init(cascade_node);
        of_node_put(cascade_node);
}

static void ge_imp3a_pci_assign_primary(void)
{
#ifdef CONFIG_PCI
        struct device_node *np;
        struct resource rsrc;

        for_each_node_by_type(np, "pci") {
                if (of_device_is_compatible(np, "fsl,mpc8540-pci") ||
                    of_device_is_compatible(np, "fsl,mpc8548-pcie") ||
                    of_device_is_compatible(np, "fsl,p2020-pcie")) {
                        of_address_to_resource(np, 0, &rsrc);
                        if ((rsrc.start & 0xfffff) == 0x9000)
                                fsl_pci_primary = np;
                }
        }
#endif
}

/*
 * Setup the architecture
 */
static void __init ge_imp3a_setup_arch(void)
{
        struct device_node *regs;

        if (ppc_md.progress)
                ppc_md.progress("ge_imp3a_setup_arch()", 0);

        mpc85xx_smp_init();

        ge_imp3a_pci_assign_primary();

        swiotlb_detect_4g();

        /* Remap basic board registers */
        regs = of_find_compatible_node(NULL, NULL, "ge,imp3a-fpga-regs");
        if (regs) {
                imp3a_regs = of_iomap(regs, 0);
                if (imp3a_regs == NULL)
                        printk(KERN_WARNING "Unable to map board registers\n");
                of_node_put(regs);
        }

#if defined(CONFIG_MMIO_NVRAM)
        mmio_nvram_init();
#endif

        printk(KERN_INFO "GE Intelligent Platforms IMP3A 3U cPCI SBC\n");
}

/* Return the PCB revision */
static unsigned int ge_imp3a_get_pcb_rev(void)
{
        unsigned int reg;

        reg = ioread16(imp3a_regs);
        return (reg >> 8) & 0xff;
}

/* Return the board (software) revision */
static unsigned int ge_imp3a_get_board_rev(void)
{
        unsigned int reg;

        reg = ioread16(imp3a_regs + 0x2);
        return reg & 0xff;
}

/* Return the FPGA revision */
static unsigned int ge_imp3a_get_fpga_rev(void)
{
        unsigned int reg;

        reg = ioread16(imp3a_regs + 0x2);
        return (reg >> 8) & 0xff;
}

/* Return compactPCI Geographical Address */
static unsigned int ge_imp3a_get_cpci_geo_addr(void)
{
        unsigned int reg;

        reg = ioread16(imp3a_regs + 0x6);
        return (reg & 0x0f00) >> 8;
}

/* Return compactPCI System Controller Status */
static unsigned int ge_imp3a_get_cpci_is_syscon(void)
{
        unsigned int reg;

        reg = ioread16(imp3a_regs + 0x6);
        return reg & (1 << 12);
}

static void ge_imp3a_show_cpuinfo(struct seq_file *m)
{
        seq_printf(m, "Vendor\t\t: GE Intelligent Platforms\n");

        seq_printf(m, "Revision\t: %u%c\n", ge_imp3a_get_pcb_rev(),
                ('A' + ge_imp3a_get_board_rev() - 1));

        seq_printf(m, "FPGA Revision\t: %u\n", ge_imp3a_get_fpga_rev());

        seq_printf(m, "cPCI geo. addr\t: %u\n", ge_imp3a_get_cpci_geo_addr());

        seq_printf(m, "cPCI syscon\t: %s\n",
                ge_imp3a_get_cpci_is_syscon() ? "yes" : "no");
}

/*
 * Called very early, device-tree isn't unflattened
 */
static int __init ge_imp3a_probe(void)
{
        unsigned long root = of_get_flat_dt_root();

        return of_flat_dt_is_compatible(root, "ge,IMP3A");
}

machine_arch_initcall(ge_imp3a, mpc85xx_common_publish_devices);

machine_arch_initcall(ge_imp3a, swiotlb_setup_bus_notifier);

define_machine(ge_imp3a) {
        .name                   = "GE_IMP3A",
        .probe                  = ge_imp3a_probe,
        .setup_arch             = ge_imp3a_setup_arch,
        .init_IRQ               = ge_imp3a_pic_init,
        .show_cpuinfo           = ge_imp3a_show_cpuinfo,
#ifdef CONFIG_PCI
        .pcibios_fixup_bus      = fsl_pcibios_fixup_bus,
#endif
        .get_irq                = mpic_get_irq,
        .restart                = fsl_rstcr_restart,
        .calibrate_decr         = generic_calibrate_decr,
        .progress               = udbg_progress,
};