linux/drivers/video/omap2/displays-new/panel-tpo-td028ttec1.c
<<
>>
Prefs
   1/*
   2 * Toppoly TD028TTEC1 panel support
   3 *
   4 * Copyright (C) 2008 Nokia Corporation
   5 * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
   6 *
   7 * Neo 1973 code (jbt6k74.c):
   8 * Copyright (C) 2006-2007 by OpenMoko, Inc.
   9 * Author: Harald Welte <laforge@openmoko.org>
  10 *
  11 * Ported and adapted from Neo 1973 U-Boot by:
  12 * H. Nikolaus Schaller <hns@goldelico.com>
  13 *
  14 * This program is free software; you can redistribute it and/or modify it
  15 * under the terms of the GNU General Public License version 2 as published by
  16 * the Free Software Foundation.
  17 *
  18 * This program is distributed in the hope that it will be useful, but WITHOUT
  19 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  20 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  21 * more details.
  22 *
  23 * You should have received a copy of the GNU General Public License along with
  24 * this program.  If not, see <http://www.gnu.org/licenses/>.
  25 */
  26
  27#include <linux/module.h>
  28#include <linux/delay.h>
  29#include <linux/spi/spi.h>
  30#include <linux/gpio.h>
  31#include <video/omapdss.h>
  32#include <video/omap-panel-data.h>
  33
  34struct panel_drv_data {
  35        struct omap_dss_device dssdev;
  36        struct omap_dss_device *in;
  37
  38        int data_lines;
  39
  40        struct omap_video_timings videomode;
  41
  42        struct spi_device *spi_dev;
  43};
  44
  45static struct omap_video_timings td028ttec1_panel_timings = {
  46        .x_res          = 480,
  47        .y_res          = 640,
  48        .pixel_clock    = 22153,
  49        .hfp            = 24,
  50        .hsw            = 8,
  51        .hbp            = 8,
  52        .vfp            = 4,
  53        .vsw            = 2,
  54        .vbp            = 2,
  55
  56        .vsync_level    = OMAPDSS_SIG_ACTIVE_LOW,
  57        .hsync_level    = OMAPDSS_SIG_ACTIVE_LOW,
  58
  59        .data_pclk_edge = OMAPDSS_DRIVE_SIG_FALLING_EDGE,
  60        .de_level       = OMAPDSS_SIG_ACTIVE_HIGH,
  61        .sync_pclk_edge = OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES,
  62};
  63
  64#define JBT_COMMAND     0x000
  65#define JBT_DATA        0x100
  66
  67static int jbt_ret_write_0(struct panel_drv_data *ddata, u8 reg)
  68{
  69        int rc;
  70        u16 tx_buf = JBT_COMMAND | reg;
  71
  72        rc = spi_write(ddata->spi_dev, (u8 *)&tx_buf,
  73                        1*sizeof(u16));
  74        if (rc != 0)
  75                dev_err(&ddata->spi_dev->dev,
  76                        "jbt_ret_write_0 spi_write ret %d\n", rc);
  77
  78        return rc;
  79}
  80
  81static int jbt_reg_write_1(struct panel_drv_data *ddata, u8 reg, u8 data)
  82{
  83        int rc;
  84        u16 tx_buf[2];
  85
  86        tx_buf[0] = JBT_COMMAND | reg;
  87        tx_buf[1] = JBT_DATA | data;
  88        rc = spi_write(ddata->spi_dev, (u8 *)tx_buf,
  89                        2*sizeof(u16));
  90        if (rc != 0)
  91                dev_err(&ddata->spi_dev->dev,
  92                        "jbt_reg_write_1 spi_write ret %d\n", rc);
  93
  94        return rc;
  95}
  96
  97static int jbt_reg_write_2(struct panel_drv_data *ddata, u8 reg, u16 data)
  98{
  99        int rc;
 100        u16 tx_buf[3];
 101
 102        tx_buf[0] = JBT_COMMAND | reg;
 103        tx_buf[1] = JBT_DATA | (data >> 8);
 104        tx_buf[2] = JBT_DATA | (data & 0xff);
 105
 106        rc = spi_write(ddata->spi_dev, (u8 *)tx_buf,
 107                        3*sizeof(u16));
 108
 109        if (rc != 0)
 110                dev_err(&ddata->spi_dev->dev,
 111                        "jbt_reg_write_2 spi_write ret %d\n", rc);
 112
 113        return rc;
 114}
 115
 116enum jbt_register {
 117        JBT_REG_SLEEP_IN                = 0x10,
 118        JBT_REG_SLEEP_OUT               = 0x11,
 119
 120        JBT_REG_DISPLAY_OFF             = 0x28,
 121        JBT_REG_DISPLAY_ON              = 0x29,
 122
 123        JBT_REG_RGB_FORMAT              = 0x3a,
 124        JBT_REG_QUAD_RATE               = 0x3b,
 125
 126        JBT_REG_POWER_ON_OFF            = 0xb0,
 127        JBT_REG_BOOSTER_OP              = 0xb1,
 128        JBT_REG_BOOSTER_MODE            = 0xb2,
 129        JBT_REG_BOOSTER_FREQ            = 0xb3,
 130        JBT_REG_OPAMP_SYSCLK            = 0xb4,
 131        JBT_REG_VSC_VOLTAGE             = 0xb5,
 132        JBT_REG_VCOM_VOLTAGE            = 0xb6,
 133        JBT_REG_EXT_DISPL               = 0xb7,
 134        JBT_REG_OUTPUT_CONTROL          = 0xb8,
 135        JBT_REG_DCCLK_DCEV              = 0xb9,
 136        JBT_REG_DISPLAY_MODE1           = 0xba,
 137        JBT_REG_DISPLAY_MODE2           = 0xbb,
 138        JBT_REG_DISPLAY_MODE            = 0xbc,
 139        JBT_REG_ASW_SLEW                = 0xbd,
 140        JBT_REG_DUMMY_DISPLAY           = 0xbe,
 141        JBT_REG_DRIVE_SYSTEM            = 0xbf,
 142
 143        JBT_REG_SLEEP_OUT_FR_A          = 0xc0,
 144        JBT_REG_SLEEP_OUT_FR_B          = 0xc1,
 145        JBT_REG_SLEEP_OUT_FR_C          = 0xc2,
 146        JBT_REG_SLEEP_IN_LCCNT_D        = 0xc3,
 147        JBT_REG_SLEEP_IN_LCCNT_E        = 0xc4,
 148        JBT_REG_SLEEP_IN_LCCNT_F        = 0xc5,
 149        JBT_REG_SLEEP_IN_LCCNT_G        = 0xc6,
 150
 151        JBT_REG_GAMMA1_FINE_1           = 0xc7,
 152        JBT_REG_GAMMA1_FINE_2           = 0xc8,
 153        JBT_REG_GAMMA1_INCLINATION      = 0xc9,
 154        JBT_REG_GAMMA1_BLUE_OFFSET      = 0xca,
 155
 156        JBT_REG_BLANK_CONTROL           = 0xcf,
 157        JBT_REG_BLANK_TH_TV             = 0xd0,
 158        JBT_REG_CKV_ON_OFF              = 0xd1,
 159        JBT_REG_CKV_1_2                 = 0xd2,
 160        JBT_REG_OEV_TIMING              = 0xd3,
 161        JBT_REG_ASW_TIMING_1            = 0xd4,
 162        JBT_REG_ASW_TIMING_2            = 0xd5,
 163
 164        JBT_REG_HCLOCK_VGA              = 0xec,
 165        JBT_REG_HCLOCK_QVGA             = 0xed,
 166};
 167
 168#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
 169
 170static int td028ttec1_panel_connect(struct omap_dss_device *dssdev)
 171{
 172        struct panel_drv_data *ddata = to_panel_data(dssdev);
 173        struct omap_dss_device *in = ddata->in;
 174        int r;
 175
 176        if (omapdss_device_is_connected(dssdev))
 177                return 0;
 178
 179        r = in->ops.dpi->connect(in, dssdev);
 180        if (r)
 181                return r;
 182
 183        return 0;
 184}
 185
 186static void td028ttec1_panel_disconnect(struct omap_dss_device *dssdev)
 187{
 188        struct panel_drv_data *ddata = to_panel_data(dssdev);
 189        struct omap_dss_device *in = ddata->in;
 190
 191        if (!omapdss_device_is_connected(dssdev))
 192                return;
 193
 194        in->ops.dpi->disconnect(in, dssdev);
 195}
 196
 197static int td028ttec1_panel_enable(struct omap_dss_device *dssdev)
 198{
 199        struct panel_drv_data *ddata = to_panel_data(dssdev);
 200        struct omap_dss_device *in = ddata->in;
 201        int r;
 202
 203        if (!omapdss_device_is_connected(dssdev))
 204                return -ENODEV;
 205
 206        if (omapdss_device_is_enabled(dssdev))
 207                return 0;
 208
 209        in->ops.dpi->set_data_lines(in, ddata->data_lines);
 210        in->ops.dpi->set_timings(in, &ddata->videomode);
 211
 212        r = in->ops.dpi->enable(in);
 213        if (r)
 214                return r;
 215
 216        dev_dbg(dssdev->dev, "td028ttec1_panel_enable() - state %d\n",
 217                dssdev->state);
 218
 219        /* three times command zero */
 220        r |= jbt_ret_write_0(ddata, 0x00);
 221        usleep_range(1000, 2000);
 222        r |= jbt_ret_write_0(ddata, 0x00);
 223        usleep_range(1000, 2000);
 224        r |= jbt_ret_write_0(ddata, 0x00);
 225        usleep_range(1000, 2000);
 226
 227        if (r) {
 228                dev_warn(dssdev->dev, "transfer error\n");
 229                goto transfer_err;
 230        }
 231
 232        /* deep standby out */
 233        r |= jbt_reg_write_1(ddata, JBT_REG_POWER_ON_OFF, 0x17);
 234
 235        /* RGB I/F on, RAM write off, QVGA through, SIGCON enable */
 236        r |= jbt_reg_write_1(ddata, JBT_REG_DISPLAY_MODE, 0x80);
 237
 238        /* Quad mode off */
 239        r |= jbt_reg_write_1(ddata, JBT_REG_QUAD_RATE, 0x00);
 240
 241        /* AVDD on, XVDD on */
 242        r |= jbt_reg_write_1(ddata, JBT_REG_POWER_ON_OFF, 0x16);
 243
 244        /* Output control */
 245        r |= jbt_reg_write_2(ddata, JBT_REG_OUTPUT_CONTROL, 0xfff9);
 246
 247        /* Sleep mode off */
 248        r |= jbt_ret_write_0(ddata, JBT_REG_SLEEP_OUT);
 249
 250        /* at this point we have like 50% grey */
 251
 252        /* initialize register set */
 253        r |= jbt_reg_write_1(ddata, JBT_REG_DISPLAY_MODE1, 0x01);
 254        r |= jbt_reg_write_1(ddata, JBT_REG_DISPLAY_MODE2, 0x00);
 255        r |= jbt_reg_write_1(ddata, JBT_REG_RGB_FORMAT, 0x60);
 256        r |= jbt_reg_write_1(ddata, JBT_REG_DRIVE_SYSTEM, 0x10);
 257        r |= jbt_reg_write_1(ddata, JBT_REG_BOOSTER_OP, 0x56);
 258        r |= jbt_reg_write_1(ddata, JBT_REG_BOOSTER_MODE, 0x33);
 259        r |= jbt_reg_write_1(ddata, JBT_REG_BOOSTER_FREQ, 0x11);
 260        r |= jbt_reg_write_1(ddata, JBT_REG_BOOSTER_FREQ, 0x11);
 261        r |= jbt_reg_write_1(ddata, JBT_REG_OPAMP_SYSCLK, 0x02);
 262        r |= jbt_reg_write_1(ddata, JBT_REG_VSC_VOLTAGE, 0x2b);
 263        r |= jbt_reg_write_1(ddata, JBT_REG_VCOM_VOLTAGE, 0x40);
 264        r |= jbt_reg_write_1(ddata, JBT_REG_EXT_DISPL, 0x03);
 265        r |= jbt_reg_write_1(ddata, JBT_REG_DCCLK_DCEV, 0x04);
 266        /*
 267         * default of 0x02 in JBT_REG_ASW_SLEW responsible for 72Hz requirement
 268         * to avoid red / blue flicker
 269         */
 270        r |= jbt_reg_write_1(ddata, JBT_REG_ASW_SLEW, 0x04);
 271        r |= jbt_reg_write_1(ddata, JBT_REG_DUMMY_DISPLAY, 0x00);
 272
 273        r |= jbt_reg_write_1(ddata, JBT_REG_SLEEP_OUT_FR_A, 0x11);
 274        r |= jbt_reg_write_1(ddata, JBT_REG_SLEEP_OUT_FR_B, 0x11);
 275        r |= jbt_reg_write_1(ddata, JBT_REG_SLEEP_OUT_FR_C, 0x11);
 276        r |= jbt_reg_write_2(ddata, JBT_REG_SLEEP_IN_LCCNT_D, 0x2040);
 277        r |= jbt_reg_write_2(ddata, JBT_REG_SLEEP_IN_LCCNT_E, 0x60c0);
 278        r |= jbt_reg_write_2(ddata, JBT_REG_SLEEP_IN_LCCNT_F, 0x1020);
 279        r |= jbt_reg_write_2(ddata, JBT_REG_SLEEP_IN_LCCNT_G, 0x60c0);
 280
 281        r |= jbt_reg_write_2(ddata, JBT_REG_GAMMA1_FINE_1, 0x5533);
 282        r |= jbt_reg_write_1(ddata, JBT_REG_GAMMA1_FINE_2, 0x00);
 283        r |= jbt_reg_write_1(ddata, JBT_REG_GAMMA1_INCLINATION, 0x00);
 284        r |= jbt_reg_write_1(ddata, JBT_REG_GAMMA1_BLUE_OFFSET, 0x00);
 285
 286        r |= jbt_reg_write_2(ddata, JBT_REG_HCLOCK_VGA, 0x1f0);
 287        r |= jbt_reg_write_1(ddata, JBT_REG_BLANK_CONTROL, 0x02);
 288        r |= jbt_reg_write_2(ddata, JBT_REG_BLANK_TH_TV, 0x0804);
 289
 290        r |= jbt_reg_write_1(ddata, JBT_REG_CKV_ON_OFF, 0x01);
 291        r |= jbt_reg_write_2(ddata, JBT_REG_CKV_1_2, 0x0000);
 292
 293        r |= jbt_reg_write_2(ddata, JBT_REG_OEV_TIMING, 0x0d0e);
 294        r |= jbt_reg_write_2(ddata, JBT_REG_ASW_TIMING_1, 0x11a4);
 295        r |= jbt_reg_write_1(ddata, JBT_REG_ASW_TIMING_2, 0x0e);
 296
 297        r |= jbt_ret_write_0(ddata, JBT_REG_DISPLAY_ON);
 298
 299        dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
 300
 301transfer_err:
 302
 303        return r ? -EIO : 0;
 304}
 305
 306static void td028ttec1_panel_disable(struct omap_dss_device *dssdev)
 307{
 308        struct panel_drv_data *ddata = to_panel_data(dssdev);
 309        struct omap_dss_device *in = ddata->in;
 310
 311        if (!omapdss_device_is_enabled(dssdev))
 312                return;
 313
 314        dev_dbg(dssdev->dev, "td028ttec1_panel_disable()\n");
 315
 316        jbt_ret_write_0(ddata, JBT_REG_DISPLAY_OFF);
 317        jbt_reg_write_2(ddata, JBT_REG_OUTPUT_CONTROL, 0x8002);
 318        jbt_ret_write_0(ddata, JBT_REG_SLEEP_IN);
 319        jbt_reg_write_1(ddata, JBT_REG_POWER_ON_OFF, 0x00);
 320
 321        in->ops.dpi->disable(in);
 322
 323        dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
 324}
 325
 326static void td028ttec1_panel_set_timings(struct omap_dss_device *dssdev,
 327                struct omap_video_timings *timings)
 328{
 329        struct panel_drv_data *ddata = to_panel_data(dssdev);
 330        struct omap_dss_device *in = ddata->in;
 331
 332        ddata->videomode = *timings;
 333        dssdev->panel.timings = *timings;
 334
 335        in->ops.dpi->set_timings(in, timings);
 336}
 337
 338static void td028ttec1_panel_get_timings(struct omap_dss_device *dssdev,
 339                struct omap_video_timings *timings)
 340{
 341        struct panel_drv_data *ddata = to_panel_data(dssdev);
 342
 343        *timings = ddata->videomode;
 344}
 345
 346static int td028ttec1_panel_check_timings(struct omap_dss_device *dssdev,
 347                struct omap_video_timings *timings)
 348{
 349        struct panel_drv_data *ddata = to_panel_data(dssdev);
 350        struct omap_dss_device *in = ddata->in;
 351
 352        return in->ops.dpi->check_timings(in, timings);
 353}
 354
 355static struct omap_dss_driver td028ttec1_ops = {
 356        .connect        = td028ttec1_panel_connect,
 357        .disconnect     = td028ttec1_panel_disconnect,
 358
 359        .enable         = td028ttec1_panel_enable,
 360        .disable        = td028ttec1_panel_disable,
 361
 362        .set_timings    = td028ttec1_panel_set_timings,
 363        .get_timings    = td028ttec1_panel_get_timings,
 364        .check_timings  = td028ttec1_panel_check_timings,
 365};
 366
 367static int td028ttec1_panel_probe_pdata(struct spi_device *spi)
 368{
 369        const struct panel_tpo_td028ttec1_platform_data *pdata;
 370        struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
 371        struct omap_dss_device *dssdev, *in;
 372
 373        pdata = dev_get_platdata(&spi->dev);
 374
 375        in = omap_dss_find_output(pdata->source);
 376        if (in == NULL) {
 377                dev_err(&spi->dev, "failed to find video source '%s'\n",
 378                                pdata->source);
 379                return -EPROBE_DEFER;
 380        }
 381
 382        ddata->in = in;
 383
 384        ddata->data_lines = pdata->data_lines;
 385
 386        dssdev = &ddata->dssdev;
 387        dssdev->name = pdata->name;
 388
 389        return 0;
 390}
 391
 392static int td028ttec1_panel_probe(struct spi_device *spi)
 393{
 394        struct panel_drv_data *ddata;
 395        struct omap_dss_device *dssdev;
 396        int r;
 397
 398        dev_dbg(&spi->dev, "%s\n", __func__);
 399
 400        spi->bits_per_word = 9;
 401        spi->mode = SPI_MODE_3;
 402
 403        r = spi_setup(spi);
 404        if (r < 0) {
 405                dev_err(&spi->dev, "spi_setup failed: %d\n", r);
 406                return r;
 407        }
 408
 409        ddata = devm_kzalloc(&spi->dev, sizeof(*ddata), GFP_KERNEL);
 410        if (ddata == NULL)
 411                return -ENOMEM;
 412
 413        dev_set_drvdata(&spi->dev, ddata);
 414
 415        ddata->spi_dev = spi;
 416
 417        if (dev_get_platdata(&spi->dev)) {
 418                r = td028ttec1_panel_probe_pdata(spi);
 419                if (r)
 420                        return r;
 421        } else {
 422                return -ENODEV;
 423        }
 424
 425        ddata->videomode = td028ttec1_panel_timings;
 426
 427        dssdev = &ddata->dssdev;
 428        dssdev->dev = &spi->dev;
 429        dssdev->driver = &td028ttec1_ops;
 430        dssdev->type = OMAP_DISPLAY_TYPE_DPI;
 431        dssdev->owner = THIS_MODULE;
 432        dssdev->panel.timings = ddata->videomode;
 433        dssdev->phy.dpi.data_lines = ddata->data_lines;
 434
 435        r = omapdss_register_display(dssdev);
 436        if (r) {
 437                dev_err(&spi->dev, "Failed to register panel\n");
 438                goto err_reg;
 439        }
 440
 441        return 0;
 442
 443err_reg:
 444        omap_dss_put_device(ddata->in);
 445        return r;
 446}
 447
 448static int td028ttec1_panel_remove(struct spi_device *spi)
 449{
 450        struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
 451        struct omap_dss_device *dssdev = &ddata->dssdev;
 452        struct omap_dss_device *in = ddata->in;
 453
 454        dev_dbg(&ddata->spi_dev->dev, "%s\n", __func__);
 455
 456        omapdss_unregister_display(dssdev);
 457
 458        td028ttec1_panel_disable(dssdev);
 459        td028ttec1_panel_disconnect(dssdev);
 460
 461        omap_dss_put_device(in);
 462
 463        return 0;
 464}
 465
 466static struct spi_driver td028ttec1_spi_driver = {
 467        .probe          = td028ttec1_panel_probe,
 468        .remove         = td028ttec1_panel_remove,
 469
 470        .driver         = {
 471                .name   = "panel-tpo-td028ttec1",
 472                .owner  = THIS_MODULE,
 473        },
 474};
 475
 476module_spi_driver(td028ttec1_spi_driver);
 477
 478MODULE_AUTHOR("H. Nikolaus Schaller <hns@goldelico.com>");
 479MODULE_DESCRIPTION("Toppoly TD028TTEC1 panel driver");
 480MODULE_LICENSE("GPL");
 481