linux/drivers/pinctrl/mvebu/pinctrl-mvebu.h
<<
>>
Prefs
   1/*
   2 * Marvell MVEBU pinctrl driver
   3 *
   4 * Authors: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
   5 *          Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
   6 *
   7 * This program is free software; you can redistribute it and/or modify
   8 * it under the terms of the GNU General Public License as published by
   9 * the Free Software Foundation; either version 2 of the License, or
  10 * (at your option) any later version.
  11 */
  12
  13#ifndef __PINCTRL_MVEBU_H__
  14#define __PINCTRL_MVEBU_H__
  15
  16/**
  17 * struct mvebu_mpp_ctrl - describe a mpp control
  18 * @name: name of the control group
  19 * @pid: first pin id handled by this control
  20 * @npins: number of pins controlled by this control
  21 * @mpp_get: (optional) special function to get mpp setting
  22 * @mpp_set: (optional) special function to set mpp setting
  23 * @mpp_gpio_req: (optional) special function to request gpio
  24 * @mpp_gpio_dir: (optional) special function to set gpio direction
  25 *
  26 * A mpp_ctrl describes a muxable unit, e.g. pin, group of pins, or
  27 * internal function, inside the SoC. Each muxable unit can be switched
  28 * between two or more different settings, e.g. assign mpp pin 13 to
  29 * uart1 or sata.
  30 *
  31 * The mpp_get/_set functions are mandatory and are used to get/set a
  32 * specific mode. The optional mpp_gpio_req/_dir functions can be used
  33 * to allow pin settings with varying gpio pins.
  34 */
  35struct mvebu_mpp_ctrl {
  36        const char *name;
  37        u8 pid;
  38        u8 npins;
  39        unsigned *pins;
  40        int (*mpp_get)(unsigned pid, unsigned long *config);
  41        int (*mpp_set)(unsigned pid, unsigned long config);
  42        int (*mpp_gpio_req)(unsigned pid);
  43        int (*mpp_gpio_dir)(unsigned pid, bool input);
  44};
  45
  46/**
  47 * struct mvebu_mpp_ctrl_setting - describe a mpp ctrl setting
  48 * @val: ctrl setting value
  49 * @name: ctrl setting name, e.g. uart2, spi0 - unique per mpp_mode
  50 * @subname: (optional) additional ctrl setting name, e.g. rts, cts
  51 * @variant: (optional) variant identifier mask
  52 * @flags: (private) flags to store gpi/gpo/gpio capabilities
  53 *
  54 * A ctrl_setting describes a specific internal mux function that a mpp pin
  55 * can be switched to. The value (val) will be written in the corresponding
  56 * register for common mpp pin configuration registers on MVEBU. SoC specific
  57 * mpp_get/_set function may use val to distinguish between different settings.
  58 *
  59 * The name will be used to switch to this setting in DT description, e.g.
  60 * marvell,function = "uart2". subname is only for debugging purposes.
  61 *
  62 * If name is one of "gpi", "gpo", "gpio" gpio capabilities are
  63 * parsed during initialization and stored in flags.
  64 *
  65 * The variant can be used to combine different revisions of one SoC to a
  66 * common pinctrl driver. It is matched (AND) with variant of soc_info to
  67 * determine if a setting is available on the current SoC revision.
  68 */
  69struct mvebu_mpp_ctrl_setting {
  70        u8 val;
  71        const char *name;
  72        const char *subname;
  73        u8 variant;
  74        u8 flags;
  75#define  MVEBU_SETTING_GPO      (1 << 0)
  76#define  MVEBU_SETTING_GPI      (1 << 1)
  77};
  78
  79/**
  80 * struct mvebu_mpp_mode - link ctrl and settings
  81 * @pid: first pin id handled by this mode
  82 * @settings: list of settings available for this mode
  83 *
  84 * A mode connects all available settings with the corresponding mpp_ctrl
  85 * given by pid.
  86 */
  87struct mvebu_mpp_mode {
  88        u8 pid;
  89        struct mvebu_mpp_ctrl_setting *settings;
  90};
  91
  92/**
  93 * struct mvebu_pinctrl_soc_info - SoC specific info passed to pinctrl-mvebu
  94 * @variant: variant mask of soc_info
  95 * @controls: list of available mvebu_mpp_ctrls
  96 * @ncontrols: number of available mvebu_mpp_ctrls
  97 * @modes: list of available mvebu_mpp_modes
  98 * @nmodes: number of available mvebu_mpp_modes
  99 * @gpioranges: list of pinctrl_gpio_ranges
 100 * @ngpioranges: number of available pinctrl_gpio_ranges
 101 *
 102 * This struct describes all pinctrl related information for a specific SoC.
 103 * If variant is unequal 0 it will be matched (AND) with variant of each
 104 * setting and allows to distinguish between different revisions of one SoC.
 105 */
 106struct mvebu_pinctrl_soc_info {
 107        u8 variant;
 108        struct mvebu_mpp_ctrl *controls;
 109        int ncontrols;
 110        struct mvebu_mpp_mode *modes;
 111        int nmodes;
 112        struct pinctrl_gpio_range *gpioranges;
 113        int ngpioranges;
 114};
 115
 116#define MPP_FUNC_CTRL(_idl, _idh, _name, _func)                 \
 117        {                                                       \
 118                .name = _name,                                  \
 119                .pid = _idl,                                    \
 120                .npins = _idh - _idl + 1,                       \
 121                .pins = (unsigned[_idh - _idl + 1]) { },        \
 122                .mpp_get = _func ## _get,                       \
 123                .mpp_set = _func ## _set,                       \
 124                .mpp_gpio_req = NULL,                           \
 125                .mpp_gpio_dir = NULL,                           \
 126        }
 127
 128#define MPP_FUNC_GPIO_CTRL(_idl, _idh, _name, _func)            \
 129        {                                                       \
 130                .name = _name,                                  \
 131                .pid = _idl,                                    \
 132                .npins = _idh - _idl + 1,                       \
 133                .pins = (unsigned[_idh - _idl + 1]) { },        \
 134                .mpp_get = _func ## _get,                       \
 135                .mpp_set = _func ## _set,                       \
 136                .mpp_gpio_req = _func ## _gpio_req,             \
 137                .mpp_gpio_dir = _func ## _gpio_dir,             \
 138        }
 139
 140#define _MPP_VAR_FUNCTION(_val, _name, _subname, _mask)         \
 141        {                                                       \
 142                .val = _val,                                    \
 143                .name = _name,                                  \
 144                .subname = _subname,                            \
 145                .variant = _mask,                               \
 146                .flags = 0,                                     \
 147        }
 148
 149#if defined(CONFIG_DEBUG_FS)
 150#define MPP_VAR_FUNCTION(_val, _name, _subname, _mask)          \
 151        _MPP_VAR_FUNCTION(_val, _name, _subname, _mask)
 152#else
 153#define MPP_VAR_FUNCTION(_val, _name, _subname, _mask)          \
 154        _MPP_VAR_FUNCTION(_val, _name, NULL, _mask)
 155#endif
 156
 157#define MPP_FUNCTION(_val, _name, _subname)                     \
 158        MPP_VAR_FUNCTION(_val, _name, _subname, (u8)-1)
 159
 160#define MPP_MODE(_id, ...)                                      \
 161        {                                                       \
 162                .pid = _id,                                     \
 163                .settings = (struct mvebu_mpp_ctrl_setting[]){  \
 164                        __VA_ARGS__, { } },                     \
 165        }
 166
 167#define MPP_GPIO_RANGE(_id, _pinbase, _gpiobase, _npins)        \
 168        {                                                       \
 169                .name = "mvebu-gpio",                           \
 170                .id = _id,                                      \
 171                .pin_base = _pinbase,                           \
 172                .base = _gpiobase,                              \
 173                .npins = _npins,                                \
 174        }
 175
 176#define MVEBU_MPPS_PER_REG      8
 177#define MVEBU_MPP_BITS          4
 178#define MVEBU_MPP_MASK          0xf
 179
 180static inline int default_mpp_ctrl_get(void __iomem *base, unsigned int pid,
 181                                       unsigned long *config)
 182{
 183        unsigned off = (pid / MVEBU_MPPS_PER_REG) * MVEBU_MPP_BITS;
 184        unsigned shift = (pid % MVEBU_MPPS_PER_REG) * MVEBU_MPP_BITS;
 185
 186        *config = (readl(base + off) >> shift) & MVEBU_MPP_MASK;
 187
 188        return 0;
 189}
 190
 191static inline int default_mpp_ctrl_set(void __iomem *base, unsigned int pid,
 192                                       unsigned long config)
 193{
 194        unsigned off = (pid / MVEBU_MPPS_PER_REG) * MVEBU_MPP_BITS;
 195        unsigned shift = (pid % MVEBU_MPPS_PER_REG) * MVEBU_MPP_BITS;
 196        unsigned long reg;
 197
 198        reg = readl(base + off) & ~(MVEBU_MPP_MASK << shift);
 199        writel(reg | (config << shift), base + off);
 200
 201        return 0;
 202}
 203
 204int mvebu_pinctrl_probe(struct platform_device *pdev);
 205int mvebu_pinctrl_remove(struct platform_device *pdev);
 206
 207#endif
 208