linux/drivers/media/usb/b2c2/flexcop-usb.c
<<
>>
Prefs
   1/*
   2 * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
   3 * flexcop-usb.c - covers the USB part
   4 * see flexcop.c for copyright information
   5 */
   6#define FC_LOG_PREFIX "flexcop_usb"
   7#include "flexcop-usb.h"
   8#include "flexcop-common.h"
   9
  10/* Version information */
  11#define DRIVER_VERSION "0.1"
  12#define DRIVER_NAME "Technisat/B2C2 FlexCop II/IIb/III Digital TV USB Driver"
  13#define DRIVER_AUTHOR "Patrick Boettcher <patrick.boettcher@desy.de>"
  14
  15/* debug */
  16#ifdef CONFIG_DVB_B2C2_FLEXCOP_DEBUG
  17#define dprintk(level,args...) \
  18        do { if ((debug & level)) printk(args); } while (0)
  19
  20#define debug_dump(b, l, method) do {\
  21        int i; \
  22        for (i = 0; i < l; i++) \
  23                method("%02x ", b[i]); \
  24        method("\n"); \
  25} while (0)
  26
  27#define DEBSTATUS ""
  28#else
  29#define dprintk(level, args...)
  30#define debug_dump(b, l, method)
  31#define DEBSTATUS " (debugging is not enabled)"
  32#endif
  33
  34static int debug;
  35module_param(debug, int, 0644);
  36MODULE_PARM_DESC(debug, "set debugging level (1=info,ts=2,"
  37                "ctrl=4,i2c=8,v8mem=16 (or-able))." DEBSTATUS);
  38#undef DEBSTATUS
  39
  40#define deb_info(args...) dprintk(0x01, args)
  41#define deb_ts(args...) dprintk(0x02, args)
  42#define deb_ctrl(args...) dprintk(0x04, args)
  43#define deb_i2c(args...) dprintk(0x08, args)
  44#define deb_v8(args...) dprintk(0x10, args)
  45
  46/* JLP 111700: we will include the 1 bit gap between the upper and lower 3 bits
  47 * in the IBI address, to make the V8 code simpler.
  48 * PCI ADDRESS FORMAT: 0x71C -> 0000 0111 0001 1100 (the six bits used)
  49 *                  in general: 0000 0HHH 000L LL00
  50 * IBI ADDRESS FORMAT:                    RHHH BLLL
  51 *
  52 * where R is the read(1)/write(0) bit, B is the busy bit
  53 * and HHH and LLL are the two sets of three bits from the PCI address.
  54 */
  55#define B2C2_FLEX_PCIOFFSET_TO_INTERNALADDR(usPCI) (u8) \
  56        (((usPCI >> 2) & 0x07) + ((usPCI >> 4) & 0x70))
  57#define B2C2_FLEX_INTERNALADDR_TO_PCIOFFSET(ucAddr) (u16) \
  58        (((ucAddr & 0x07) << 2) + ((ucAddr & 0x70) << 4))
  59
  60/*
  61 * DKT 020228
  62 * - forget about this VENDOR_BUFFER_SIZE, read and write register
  63 *   deal with DWORD or 4 bytes, that should be should from now on
  64 * - from now on, we don't support anything older than firm 1.00
  65 *   I eliminated the write register as a 2 trip of writing hi word and lo word
  66 *   and force this to write only 4 bytes at a time.
  67 *   NOTE: this should work with all the firmware from 1.00 and newer
  68 */
  69static int flexcop_usb_readwrite_dw(struct flexcop_device *fc, u16 wRegOffsPCI, u32 *val, u8 read)
  70{
  71        struct flexcop_usb *fc_usb = fc->bus_specific;
  72        u8 request = read ? B2C2_USB_READ_REG : B2C2_USB_WRITE_REG;
  73        u8 request_type = (read ? USB_DIR_IN : USB_DIR_OUT) | USB_TYPE_VENDOR;
  74        u8 wAddress = B2C2_FLEX_PCIOFFSET_TO_INTERNALADDR(wRegOffsPCI) |
  75                (read ? 0x80 : 0);
  76
  77        int len = usb_control_msg(fc_usb->udev,
  78                        read ? B2C2_USB_CTRL_PIPE_IN : B2C2_USB_CTRL_PIPE_OUT,
  79                        request,
  80                        request_type, /* 0xc0 read or 0x40 write */
  81                        wAddress,
  82                        0,
  83                        val,
  84                        sizeof(u32),
  85                        B2C2_WAIT_FOR_OPERATION_RDW * HZ);
  86
  87        if (len != sizeof(u32)) {
  88                err("error while %s dword from %d (%d).", read ? "reading" :
  89                                "writing", wAddress, wRegOffsPCI);
  90                return -EIO;
  91        }
  92        return 0;
  93}
  94/*
  95 * DKT 010817 - add support for V8 memory read/write and flash update
  96 */
  97static int flexcop_usb_v8_memory_req(struct flexcop_usb *fc_usb,
  98                flexcop_usb_request_t req, u8 page, u16 wAddress,
  99                u8 *pbBuffer, u32 buflen)
 100{
 101        u8 request_type = USB_TYPE_VENDOR;
 102        u16 wIndex;
 103        int nWaitTime, pipe, len;
 104        wIndex = page << 8;
 105
 106        switch (req) {
 107        case B2C2_USB_READ_V8_MEM:
 108                nWaitTime = B2C2_WAIT_FOR_OPERATION_V8READ;
 109                request_type |= USB_DIR_IN;
 110                pipe = B2C2_USB_CTRL_PIPE_IN;
 111                break;
 112        case B2C2_USB_WRITE_V8_MEM:
 113                wIndex |= pbBuffer[0];
 114                request_type |= USB_DIR_OUT;
 115                nWaitTime = B2C2_WAIT_FOR_OPERATION_V8WRITE;
 116                pipe = B2C2_USB_CTRL_PIPE_OUT;
 117                break;
 118        case B2C2_USB_FLASH_BLOCK:
 119                request_type |= USB_DIR_OUT;
 120                nWaitTime = B2C2_WAIT_FOR_OPERATION_V8FLASH;
 121                pipe = B2C2_USB_CTRL_PIPE_OUT;
 122                break;
 123        default:
 124                deb_info("unsupported request for v8_mem_req %x.\n", req);
 125                return -EINVAL;
 126        }
 127        deb_v8("v8mem: %02x %02x %04x %04x, len: %d\n", request_type, req,
 128                        wAddress, wIndex, buflen);
 129
 130        len = usb_control_msg(fc_usb->udev, pipe,
 131                        req,
 132                        request_type,
 133                        wAddress,
 134                        wIndex,
 135                        pbBuffer,
 136                        buflen,
 137                        nWaitTime * HZ);
 138
 139        debug_dump(pbBuffer, len, deb_v8);
 140        return len == buflen ? 0 : -EIO;
 141}
 142
 143#define bytes_left_to_read_on_page(paddr,buflen) \
 144        ((V8_MEMORY_PAGE_SIZE - (paddr & V8_MEMORY_PAGE_MASK)) > buflen \
 145         ? buflen : (V8_MEMORY_PAGE_SIZE - (paddr & V8_MEMORY_PAGE_MASK)))
 146
 147static int flexcop_usb_memory_req(struct flexcop_usb *fc_usb,
 148                flexcop_usb_request_t req, flexcop_usb_mem_page_t page_start,
 149                u32 addr, int extended, u8 *buf, u32 len)
 150{
 151        int i,ret = 0;
 152        u16 wMax;
 153        u32 pagechunk = 0;
 154
 155        switch(req) {
 156        case B2C2_USB_READ_V8_MEM:
 157                wMax = USB_MEM_READ_MAX;
 158                break;
 159        case B2C2_USB_WRITE_V8_MEM:
 160                wMax = USB_MEM_WRITE_MAX;
 161                break;
 162        case B2C2_USB_FLASH_BLOCK:
 163                wMax = USB_FLASH_MAX;
 164                break;
 165        default:
 166                return -EINVAL;
 167                break;
 168        }
 169        for (i = 0; i < len;) {
 170                pagechunk =
 171                        wMax < bytes_left_to_read_on_page(addr, len) ?
 172                                wMax :
 173                                bytes_left_to_read_on_page(addr, len);
 174                deb_info("%x\n",
 175                        (addr & V8_MEMORY_PAGE_MASK) |
 176                                (V8_MEMORY_EXTENDED*extended));
 177
 178                ret = flexcop_usb_v8_memory_req(fc_usb, req,
 179                        page_start + (addr / V8_MEMORY_PAGE_SIZE),
 180                        (addr & V8_MEMORY_PAGE_MASK) |
 181                                (V8_MEMORY_EXTENDED*extended),
 182                        &buf[i], pagechunk);
 183
 184                if (ret < 0)
 185                        return ret;
 186                addr += pagechunk;
 187                len -= pagechunk;
 188        }
 189        return 0;
 190}
 191
 192static int flexcop_usb_get_mac_addr(struct flexcop_device *fc, int extended)
 193{
 194        return flexcop_usb_memory_req(fc->bus_specific, B2C2_USB_READ_V8_MEM,
 195                V8_MEMORY_PAGE_FLASH, 0x1f010, 1,
 196                fc->dvb_adapter.proposed_mac, 6);
 197}
 198
 199#if 0
 200static int flexcop_usb_utility_req(struct flexcop_usb *fc_usb, int set,
 201                flexcop_usb_utility_function_t func, u8 extra, u16 wIndex,
 202                u16 buflen, u8 *pvBuffer)
 203{
 204        u16 wValue;
 205        u8 request_type = (set ? USB_DIR_OUT : USB_DIR_IN) | USB_TYPE_VENDOR;
 206        int nWaitTime = 2,
 207            pipe = set ? B2C2_USB_CTRL_PIPE_OUT : B2C2_USB_CTRL_PIPE_IN, len;
 208        wValue = (func << 8) | extra;
 209
 210        len = usb_control_msg(fc_usb->udev,pipe,
 211                        B2C2_USB_UTILITY,
 212                        request_type,
 213                        wValue,
 214                        wIndex,
 215                        pvBuffer,
 216                        buflen,
 217                        nWaitTime * HZ);
 218        return len == buflen ? 0 : -EIO;
 219}
 220#endif
 221
 222/* usb i2c stuff */
 223static int flexcop_usb_i2c_req(struct flexcop_i2c_adapter *i2c,
 224                flexcop_usb_request_t req, flexcop_usb_i2c_function_t func,
 225                u8 chipaddr, u8 addr, u8 *buf, u8 buflen)
 226{
 227        struct flexcop_usb *fc_usb = i2c->fc->bus_specific;
 228        u16 wValue, wIndex;
 229        int nWaitTime,pipe,len;
 230        u8 request_type = USB_TYPE_VENDOR;
 231
 232        switch (func) {
 233        case USB_FUNC_I2C_WRITE:
 234        case USB_FUNC_I2C_MULTIWRITE:
 235        case USB_FUNC_I2C_REPEATWRITE:
 236                /* DKT 020208 - add this to support special case of DiSEqC */
 237        case USB_FUNC_I2C_CHECKWRITE:
 238                pipe = B2C2_USB_CTRL_PIPE_OUT;
 239                nWaitTime = 2;
 240                request_type |= USB_DIR_OUT;
 241                break;
 242        case USB_FUNC_I2C_READ:
 243        case USB_FUNC_I2C_REPEATREAD:
 244                pipe = B2C2_USB_CTRL_PIPE_IN;
 245                nWaitTime = 2;
 246                request_type |= USB_DIR_IN;
 247                break;
 248        default:
 249                deb_info("unsupported function for i2c_req %x\n", func);
 250                return -EINVAL;
 251        }
 252        wValue = (func << 8) | (i2c->port << 4);
 253        wIndex = (chipaddr << 8 ) | addr;
 254
 255        deb_i2c("i2c %2d: %02x %02x %02x %02x %02x %02x\n",
 256                        func, request_type, req,
 257                        wValue & 0xff, wValue >> 8,
 258                        wIndex & 0xff, wIndex >> 8);
 259
 260        len = usb_control_msg(fc_usb->udev,pipe,
 261                        req,
 262                        request_type,
 263                        wValue,
 264                        wIndex,
 265                        buf,
 266                        buflen,
 267                        nWaitTime * HZ);
 268        return len == buflen ? 0 : -EREMOTEIO;
 269}
 270
 271/* actual bus specific access functions,
 272   make sure prototype are/will be equal to pci */
 273static flexcop_ibi_value flexcop_usb_read_ibi_reg(struct flexcop_device *fc,
 274        flexcop_ibi_register reg)
 275{
 276        flexcop_ibi_value val;
 277        val.raw = 0;
 278        flexcop_usb_readwrite_dw(fc, reg, &val.raw, 1);
 279        return val;
 280}
 281
 282static int flexcop_usb_write_ibi_reg(struct flexcop_device *fc,
 283                flexcop_ibi_register reg, flexcop_ibi_value val)
 284{
 285        return flexcop_usb_readwrite_dw(fc, reg, &val.raw, 0);
 286}
 287
 288static int flexcop_usb_i2c_request(struct flexcop_i2c_adapter *i2c,
 289                flexcop_access_op_t op, u8 chipaddr, u8 addr, u8 *buf, u16 len)
 290{
 291        if (op == FC_READ)
 292                return flexcop_usb_i2c_req(i2c, B2C2_USB_I2C_REQUEST,
 293                                USB_FUNC_I2C_READ, chipaddr, addr, buf, len);
 294        else
 295                return flexcop_usb_i2c_req(i2c, B2C2_USB_I2C_REQUEST,
 296                                USB_FUNC_I2C_WRITE, chipaddr, addr, buf, len);
 297}
 298
 299static void flexcop_usb_process_frame(struct flexcop_usb *fc_usb,
 300        u8 *buffer, int buffer_length)
 301{
 302        u8 *b;
 303        int l;
 304
 305        deb_ts("tmp_buffer_length=%d, buffer_length=%d\n",
 306                fc_usb->tmp_buffer_length, buffer_length);
 307
 308        if (fc_usb->tmp_buffer_length > 0) {
 309                memcpy(fc_usb->tmp_buffer+fc_usb->tmp_buffer_length, buffer,
 310                                buffer_length);
 311                fc_usb->tmp_buffer_length += buffer_length;
 312                b = fc_usb->tmp_buffer;
 313                l = fc_usb->tmp_buffer_length;
 314        } else {
 315                b=buffer;
 316                l=buffer_length;
 317        }
 318
 319        while (l >= 190) {
 320                if (*b == 0xff) {
 321                        switch (*(b+1) & 0x03) {
 322                        case 0x01: /* media packet */
 323                                if (*(b+2) == 0x47)
 324                                        flexcop_pass_dmx_packets(
 325                                                        fc_usb->fc_dev, b+2, 1);
 326                                else
 327                                        deb_ts("not ts packet %*ph\n", 4, b+2);
 328                                b += 190;
 329                                l -= 190;
 330                                break;
 331                        default:
 332                                deb_ts("wrong packet type\n");
 333                                l = 0;
 334                                break;
 335                        }
 336                } else {
 337                        deb_ts("wrong header\n");
 338                        l = 0;
 339                }
 340        }
 341
 342        if (l>0)
 343                memcpy(fc_usb->tmp_buffer, b, l);
 344        fc_usb->tmp_buffer_length = l;
 345}
 346
 347static void flexcop_usb_urb_complete(struct urb *urb)
 348{
 349        struct flexcop_usb *fc_usb = urb->context;
 350        int i;
 351
 352        if (urb->actual_length > 0)
 353                deb_ts("urb completed, bufsize: %d actlen; %d\n",
 354                        urb->transfer_buffer_length, urb->actual_length);
 355
 356        for (i = 0; i < urb->number_of_packets; i++) {
 357                if (urb->iso_frame_desc[i].status < 0) {
 358                        err("iso frame descriptor %d has an error: %d\n", i,
 359                                urb->iso_frame_desc[i].status);
 360                } else
 361                        if (urb->iso_frame_desc[i].actual_length > 0) {
 362                                deb_ts("passed %d bytes to the demux\n",
 363                                        urb->iso_frame_desc[i].actual_length);
 364
 365                                flexcop_usb_process_frame(fc_usb,
 366                                        urb->transfer_buffer +
 367                                                urb->iso_frame_desc[i].offset,
 368                                        urb->iso_frame_desc[i].actual_length);
 369                        }
 370                urb->iso_frame_desc[i].status = 0;
 371                urb->iso_frame_desc[i].actual_length = 0;
 372        }
 373        usb_submit_urb(urb,GFP_ATOMIC);
 374}
 375
 376static int flexcop_usb_stream_control(struct flexcop_device *fc, int onoff)
 377{
 378        /* submit/kill iso packets */
 379        return 0;
 380}
 381
 382static void flexcop_usb_transfer_exit(struct flexcop_usb *fc_usb)
 383{
 384        int i;
 385        for (i = 0; i < B2C2_USB_NUM_ISO_URB; i++)
 386                if (fc_usb->iso_urb[i] != NULL) {
 387                        deb_ts("unlinking/killing urb no. %d\n",i);
 388                        usb_kill_urb(fc_usb->iso_urb[i]);
 389                        usb_free_urb(fc_usb->iso_urb[i]);
 390                }
 391
 392        if (fc_usb->iso_buffer != NULL)
 393                usb_free_coherent(fc_usb->udev,
 394                        fc_usb->buffer_size, fc_usb->iso_buffer,
 395                        fc_usb->dma_addr);
 396}
 397
 398static int flexcop_usb_transfer_init(struct flexcop_usb *fc_usb)
 399{
 400        u16 frame_size = le16_to_cpu(
 401                fc_usb->uintf->cur_altsetting->endpoint[0].desc.wMaxPacketSize);
 402        int bufsize = B2C2_USB_NUM_ISO_URB * B2C2_USB_FRAMES_PER_ISO *
 403                frame_size, i, j, ret;
 404        int buffer_offset = 0;
 405
 406        deb_ts("creating %d iso-urbs with %d frames "
 407                        "each of %d bytes size = %d.\n", B2C2_USB_NUM_ISO_URB,
 408                        B2C2_USB_FRAMES_PER_ISO, frame_size, bufsize);
 409
 410        fc_usb->iso_buffer = usb_alloc_coherent(fc_usb->udev,
 411                        bufsize, GFP_KERNEL, &fc_usb->dma_addr);
 412        if (fc_usb->iso_buffer == NULL)
 413                return -ENOMEM;
 414
 415        memset(fc_usb->iso_buffer, 0, bufsize);
 416        fc_usb->buffer_size = bufsize;
 417
 418        /* creating iso urbs */
 419        for (i = 0; i < B2C2_USB_NUM_ISO_URB; i++) {
 420                fc_usb->iso_urb[i] = usb_alloc_urb(B2C2_USB_FRAMES_PER_ISO,
 421                        GFP_ATOMIC);
 422                if (fc_usb->iso_urb[i] == NULL) {
 423                        ret = -ENOMEM;
 424                        goto urb_error;
 425                }
 426        }
 427
 428        /* initialising and submitting iso urbs */
 429        for (i = 0; i < B2C2_USB_NUM_ISO_URB; i++) {
 430                int frame_offset = 0;
 431                struct urb *urb = fc_usb->iso_urb[i];
 432                deb_ts("initializing and submitting urb no. %d "
 433                        "(buf_offset: %d).\n", i, buffer_offset);
 434
 435                urb->dev = fc_usb->udev;
 436                urb->context = fc_usb;
 437                urb->complete = flexcop_usb_urb_complete;
 438                urb->pipe = B2C2_USB_DATA_PIPE;
 439                urb->transfer_flags = URB_ISO_ASAP;
 440                urb->interval = 1;
 441                urb->number_of_packets = B2C2_USB_FRAMES_PER_ISO;
 442                urb->transfer_buffer_length = frame_size * B2C2_USB_FRAMES_PER_ISO;
 443                urb->transfer_buffer = fc_usb->iso_buffer + buffer_offset;
 444
 445                buffer_offset += frame_size * B2C2_USB_FRAMES_PER_ISO;
 446                for (j = 0; j < B2C2_USB_FRAMES_PER_ISO; j++) {
 447                        deb_ts("urb no: %d, frame: %d, frame_offset: %d\n",
 448                                        i, j, frame_offset);
 449                        urb->iso_frame_desc[j].offset = frame_offset;
 450                        urb->iso_frame_desc[j].length = frame_size;
 451                        frame_offset += frame_size;
 452                }
 453
 454                if ((ret = usb_submit_urb(fc_usb->iso_urb[i],GFP_ATOMIC))) {
 455                        err("submitting urb %d failed with %d.", i, ret);
 456                        goto urb_error;
 457                }
 458                deb_ts("submitted urb no. %d.\n",i);
 459        }
 460
 461        /* SRAM */
 462        flexcop_sram_set_dest(fc_usb->fc_dev, FC_SRAM_DEST_MEDIA |
 463                        FC_SRAM_DEST_NET | FC_SRAM_DEST_CAO | FC_SRAM_DEST_CAI,
 464                        FC_SRAM_DEST_TARGET_WAN_USB);
 465        flexcop_wan_set_speed(fc_usb->fc_dev, FC_WAN_SPEED_8MBITS);
 466        flexcop_sram_ctrl(fc_usb->fc_dev, 1, 1, 1);
 467        return 0;
 468
 469urb_error:
 470        flexcop_usb_transfer_exit(fc_usb);
 471        return ret;
 472}
 473
 474static int flexcop_usb_init(struct flexcop_usb *fc_usb)
 475{
 476        /* use the alternate setting with the larges buffer */
 477        usb_set_interface(fc_usb->udev,0,1);
 478        switch (fc_usb->udev->speed) {
 479        case USB_SPEED_LOW:
 480                err("cannot handle USB speed because it is too slow.");
 481                return -ENODEV;
 482                break;
 483        case USB_SPEED_FULL:
 484                info("running at FULL speed.");
 485                break;
 486        case USB_SPEED_HIGH:
 487                info("running at HIGH speed.");
 488                break;
 489        case USB_SPEED_UNKNOWN: /* fall through */
 490        default:
 491                err("cannot handle USB speed because it is unknown.");
 492                return -ENODEV;
 493        }
 494        usb_set_intfdata(fc_usb->uintf, fc_usb);
 495        return 0;
 496}
 497
 498static void flexcop_usb_exit(struct flexcop_usb *fc_usb)
 499{
 500        usb_set_intfdata(fc_usb->uintf, NULL);
 501}
 502
 503static int flexcop_usb_probe(struct usb_interface *intf,
 504                const struct usb_device_id *id)
 505{
 506        struct usb_device *udev = interface_to_usbdev(intf);
 507        struct flexcop_usb *fc_usb = NULL;
 508        struct flexcop_device *fc = NULL;
 509        int ret;
 510
 511        if ((fc = flexcop_device_kmalloc(sizeof(struct flexcop_usb))) == NULL) {
 512                err("out of memory\n");
 513                return -ENOMEM;
 514        }
 515
 516        /* general flexcop init */
 517        fc_usb = fc->bus_specific;
 518        fc_usb->fc_dev = fc;
 519
 520        fc->read_ibi_reg  = flexcop_usb_read_ibi_reg;
 521        fc->write_ibi_reg = flexcop_usb_write_ibi_reg;
 522        fc->i2c_request = flexcop_usb_i2c_request;
 523        fc->get_mac_addr = flexcop_usb_get_mac_addr;
 524
 525        fc->stream_control = flexcop_usb_stream_control;
 526
 527        fc->pid_filtering = 1;
 528        fc->bus_type = FC_USB;
 529
 530        fc->dev = &udev->dev;
 531        fc->owner = THIS_MODULE;
 532
 533        /* bus specific part */
 534        fc_usb->udev = udev;
 535        fc_usb->uintf = intf;
 536        if ((ret = flexcop_usb_init(fc_usb)) != 0)
 537                goto err_kfree;
 538
 539        /* init flexcop */
 540        if ((ret = flexcop_device_initialize(fc)) != 0)
 541                goto err_usb_exit;
 542
 543        /* xfer init */
 544        if ((ret = flexcop_usb_transfer_init(fc_usb)) != 0)
 545                goto err_fc_exit;
 546
 547        info("%s successfully initialized and connected.", DRIVER_NAME);
 548        return 0;
 549
 550err_fc_exit:
 551        flexcop_device_exit(fc);
 552err_usb_exit:
 553        flexcop_usb_exit(fc_usb);
 554err_kfree:
 555        flexcop_device_kfree(fc);
 556        return ret;
 557}
 558
 559static void flexcop_usb_disconnect(struct usb_interface *intf)
 560{
 561        struct flexcop_usb *fc_usb = usb_get_intfdata(intf);
 562        flexcop_usb_transfer_exit(fc_usb);
 563        flexcop_device_exit(fc_usb->fc_dev);
 564        flexcop_usb_exit(fc_usb);
 565        flexcop_device_kfree(fc_usb->fc_dev);
 566        info("%s successfully deinitialized and disconnected.", DRIVER_NAME);
 567}
 568
 569static struct usb_device_id flexcop_usb_table [] = {
 570        { USB_DEVICE(0x0af7, 0x0101) },
 571        { }
 572};
 573MODULE_DEVICE_TABLE (usb, flexcop_usb_table);
 574
 575/* usb specific object needed to register this driver with the usb subsystem */
 576static struct usb_driver flexcop_usb_driver = {
 577        .name           = "b2c2_flexcop_usb",
 578        .probe          = flexcop_usb_probe,
 579        .disconnect = flexcop_usb_disconnect,
 580        .id_table       = flexcop_usb_table,
 581};
 582
 583module_usb_driver(flexcop_usb_driver);
 584
 585MODULE_AUTHOR(DRIVER_AUTHOR);
 586MODULE_DESCRIPTION(DRIVER_NAME);
 587MODULE_LICENSE("GPL");
 588