linux/drivers/net/ethernet/fujitsu/fmvj18x_cs.c
<<
>>
Prefs
   1/*======================================================================
   2    fmvj18x_cs.c 2.8 2002/03/23
   3
   4    A fmvj18x (and its compatibles) PCMCIA client driver
   5
   6    Contributed by Shingo Fujimoto, shingo@flab.fujitsu.co.jp
   7
   8    TDK LAK-CD021 and CONTEC C-NET(PC)C support added by 
   9    Nobuhiro Katayama, kata-n@po.iijnet.or.jp
  10
  11    The PCMCIA client code is based on code written by David Hinds.
  12    Network code is based on the "FMV-18x driver" by Yutaka TAMIYA
  13    but is actually largely Donald Becker's AT1700 driver, which
  14    carries the following attribution:
  15
  16    Written 1993-94 by Donald Becker.
  17
  18    Copyright 1993 United States Government as represented by the
  19    Director, National Security Agency.
  20    
  21    This software may be used and distributed according to the terms
  22    of the GNU General Public License, incorporated herein by reference.
  23    
  24    The author may be reached as becker@scyld.com, or C/O
  25    Scyld Computing Corporation
  26    410 Severn Ave., Suite 210
  27    Annapolis MD 21403
  28   
  29======================================================================*/
  30
  31#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  32
  33#define DRV_NAME        "fmvj18x_cs"
  34#define DRV_VERSION     "2.9"
  35
  36#include <linux/module.h>
  37#include <linux/kernel.h>
  38#include <linux/ptrace.h>
  39#include <linux/slab.h>
  40#include <linux/string.h>
  41#include <linux/timer.h>
  42#include <linux/interrupt.h>
  43#include <linux/in.h>
  44#include <linux/delay.h>
  45#include <linux/ethtool.h>
  46#include <linux/netdevice.h>
  47#include <linux/etherdevice.h>
  48#include <linux/skbuff.h>
  49#include <linux/if_arp.h>
  50#include <linux/ioport.h>
  51#include <linux/crc32.h>
  52
  53#include <pcmcia/cistpl.h>
  54#include <pcmcia/ciscode.h>
  55#include <pcmcia/ds.h>
  56
  57#include <asm/uaccess.h>
  58#include <asm/io.h>
  59
  60/*====================================================================*/
  61
  62/* Module parameters */
  63
  64MODULE_DESCRIPTION("fmvj18x and compatible PCMCIA ethernet driver");
  65MODULE_LICENSE("GPL");
  66
  67#define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0)
  68
  69/* SRAM configuration */
  70/* 0:4KB*2 TX buffer   else:8KB*2 TX buffer */
  71INT_MODULE_PARM(sram_config, 0);
  72
  73
  74/*====================================================================*/
  75/*
  76    PCMCIA event handlers
  77 */
  78static int fmvj18x_config(struct pcmcia_device *link);
  79static int fmvj18x_get_hwinfo(struct pcmcia_device *link, u_char *node_id);
  80static int fmvj18x_setup_mfc(struct pcmcia_device *link);
  81static void fmvj18x_release(struct pcmcia_device *link);
  82static void fmvj18x_detach(struct pcmcia_device *p_dev);
  83
  84/*
  85    LAN controller(MBH86960A) specific routines
  86 */
  87static int fjn_config(struct net_device *dev, struct ifmap *map);
  88static int fjn_open(struct net_device *dev);
  89static int fjn_close(struct net_device *dev);
  90static netdev_tx_t fjn_start_xmit(struct sk_buff *skb,
  91                                        struct net_device *dev);
  92static irqreturn_t fjn_interrupt(int irq, void *dev_id);
  93static void fjn_rx(struct net_device *dev);
  94static void fjn_reset(struct net_device *dev);
  95static void set_rx_mode(struct net_device *dev);
  96static void fjn_tx_timeout(struct net_device *dev);
  97static const struct ethtool_ops netdev_ethtool_ops;
  98
  99/*
 100    card type
 101 */
 102enum cardtype { MBH10302, MBH10304, TDK, CONTEC, LA501, UNGERMANN,
 103               XXX10304, NEC, KME
 104};
 105
 106/*
 107    driver specific data structure
 108*/
 109struct local_info {
 110        struct pcmcia_device    *p_dev;
 111    long open_time;
 112    uint tx_started:1;
 113    uint tx_queue;
 114    u_short tx_queue_len;
 115    enum cardtype cardtype;
 116    u_short sent;
 117    u_char __iomem *base;
 118};
 119
 120#define MC_FILTERBREAK 64
 121
 122/*====================================================================*/
 123/* 
 124    ioport offset from the base address 
 125 */
 126#define TX_STATUS               0 /* transmit status register */
 127#define RX_STATUS               1 /* receive status register */
 128#define TX_INTR                 2 /* transmit interrupt mask register */
 129#define RX_INTR                 3 /* receive interrupt mask register */
 130#define TX_MODE                 4 /* transmit mode register */
 131#define RX_MODE                 5 /* receive mode register */
 132#define CONFIG_0                6 /* configuration register 0 */
 133#define CONFIG_1                7 /* configuration register 1 */
 134
 135#define NODE_ID                 8 /* node ID register            (bank 0) */
 136#define MAR_ADR                 8 /* multicast address registers (bank 1) */
 137
 138#define DATAPORT                8 /* buffer mem port registers   (bank 2) */
 139#define TX_START               10 /* transmit start register */
 140#define COL_CTRL               11 /* 16 collision control register */
 141#define BMPR12                 12 /* reserved */
 142#define BMPR13                 13 /* reserved */
 143#define RX_SKIP                14 /* skip received packet register */
 144
 145#define LAN_CTRL               16 /* LAN card control register */
 146
 147#define MAC_ID               0x1a /* hardware address */
 148#define UNGERMANN_MAC_ID     0x18 /* UNGERMANN-BASS hardware address */
 149
 150/* 
 151    control bits 
 152 */
 153#define ENA_TMT_OK           0x80
 154#define ENA_TMT_REC          0x20
 155#define ENA_COL              0x04
 156#define ENA_16_COL           0x02
 157#define ENA_TBUS_ERR         0x01
 158
 159#define ENA_PKT_RDY          0x80
 160#define ENA_BUS_ERR          0x40
 161#define ENA_LEN_ERR          0x08
 162#define ENA_ALG_ERR          0x04
 163#define ENA_CRC_ERR          0x02
 164#define ENA_OVR_FLO          0x01
 165
 166/* flags */
 167#define F_TMT_RDY            0x80 /* can accept new packet */
 168#define F_NET_BSY            0x40 /* carrier is detected */
 169#define F_TMT_OK             0x20 /* send packet successfully */
 170#define F_SRT_PKT            0x10 /* short packet error */
 171#define F_COL_ERR            0x04 /* collision error */
 172#define F_16_COL             0x02 /* 16 collision error */
 173#define F_TBUS_ERR           0x01 /* bus read error */
 174
 175#define F_PKT_RDY            0x80 /* packet(s) in buffer */
 176#define F_BUS_ERR            0x40 /* bus read error */
 177#define F_LEN_ERR            0x08 /* short packet */
 178#define F_ALG_ERR            0x04 /* frame error */
 179#define F_CRC_ERR            0x02 /* CRC error */
 180#define F_OVR_FLO            0x01 /* overflow error */
 181
 182#define F_BUF_EMP            0x40 /* receive buffer is empty */
 183
 184#define F_SKP_PKT            0x05 /* drop packet in buffer */
 185
 186/* default bitmaps */
 187#define D_TX_INTR  ( ENA_TMT_OK )
 188#define D_RX_INTR  ( ENA_PKT_RDY | ENA_LEN_ERR \
 189                   | ENA_ALG_ERR | ENA_CRC_ERR | ENA_OVR_FLO )
 190#define TX_STAT_M  ( F_TMT_RDY )
 191#define RX_STAT_M  ( F_PKT_RDY | F_LEN_ERR \
 192                   | F_ALG_ERR | F_CRC_ERR | F_OVR_FLO )
 193
 194/* commands */
 195#define D_TX_MODE            0x06 /* no tests, detect carrier */
 196#define ID_MATCHED           0x02 /* (RX_MODE) */
 197#define RECV_ALL             0x03 /* (RX_MODE) */
 198#define CONFIG0_DFL          0x5a /* 16bit bus, 4K x 2 Tx queues */
 199#define CONFIG0_DFL_1        0x5e /* 16bit bus, 8K x 2 Tx queues */
 200#define CONFIG0_RST          0xda /* Data Link Controller off (CONFIG_0) */
 201#define CONFIG0_RST_1        0xde /* Data Link Controller off (CONFIG_0) */
 202#define BANK_0               0xa0 /* bank 0 (CONFIG_1) */
 203#define BANK_1               0xa4 /* bank 1 (CONFIG_1) */
 204#define BANK_2               0xa8 /* bank 2 (CONFIG_1) */
 205#define CHIP_OFF             0x80 /* contrl chip power off (CONFIG_1) */
 206#define DO_TX                0x80 /* do transmit packet */
 207#define SEND_PKT             0x81 /* send a packet */
 208#define AUTO_MODE            0x07 /* Auto skip packet on 16 col detected */
 209#define MANU_MODE            0x03 /* Stop and skip packet on 16 col */
 210#define TDK_AUTO_MODE        0x47 /* Auto skip packet on 16 col detected */
 211#define TDK_MANU_MODE        0x43 /* Stop and skip packet on 16 col */
 212#define INTR_OFF             0x0d /* LAN controller ignores interrupts */
 213#define INTR_ON              0x1d /* LAN controller will catch interrupts */
 214
 215#define TX_TIMEOUT              ((400*HZ)/1000)
 216
 217#define BANK_0U              0x20 /* bank 0 (CONFIG_1) */
 218#define BANK_1U              0x24 /* bank 1 (CONFIG_1) */
 219#define BANK_2U              0x28 /* bank 2 (CONFIG_1) */
 220
 221static const struct net_device_ops fjn_netdev_ops = {
 222        .ndo_open               = fjn_open,
 223        .ndo_stop               = fjn_close,
 224        .ndo_start_xmit         = fjn_start_xmit,
 225        .ndo_tx_timeout         = fjn_tx_timeout,
 226        .ndo_set_config         = fjn_config,
 227        .ndo_set_rx_mode        = set_rx_mode,
 228        .ndo_change_mtu         = eth_change_mtu,
 229        .ndo_set_mac_address    = eth_mac_addr,
 230        .ndo_validate_addr      = eth_validate_addr,
 231};
 232
 233static int fmvj18x_probe(struct pcmcia_device *link)
 234{
 235    struct local_info *lp;
 236    struct net_device *dev;
 237
 238    dev_dbg(&link->dev, "fmvj18x_attach()\n");
 239
 240    /* Make up a FMVJ18x specific data structure */
 241    dev = alloc_etherdev(sizeof(struct local_info));
 242    if (!dev)
 243        return -ENOMEM;
 244    lp = netdev_priv(dev);
 245    link->priv = dev;
 246    lp->p_dev = link;
 247    lp->base = NULL;
 248
 249    /* The io structure describes IO port mapping */
 250    link->resource[0]->end = 32;
 251    link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
 252
 253    /* General socket configuration */
 254    link->config_flags |= CONF_ENABLE_IRQ;
 255
 256    dev->netdev_ops = &fjn_netdev_ops;
 257    dev->watchdog_timeo = TX_TIMEOUT;
 258
 259    dev->ethtool_ops = &netdev_ethtool_ops;
 260
 261    return fmvj18x_config(link);
 262} /* fmvj18x_attach */
 263
 264/*====================================================================*/
 265
 266static void fmvj18x_detach(struct pcmcia_device *link)
 267{
 268    struct net_device *dev = link->priv;
 269
 270    dev_dbg(&link->dev, "fmvj18x_detach\n");
 271
 272    unregister_netdev(dev);
 273
 274    fmvj18x_release(link);
 275
 276    free_netdev(dev);
 277} /* fmvj18x_detach */
 278
 279/*====================================================================*/
 280
 281static int mfc_try_io_port(struct pcmcia_device *link)
 282{
 283    int i, ret;
 284    static const unsigned int serial_base[5] =
 285        { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
 286
 287    for (i = 0; i < 5; i++) {
 288        link->resource[1]->start = serial_base[i];
 289        link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
 290        if (link->resource[1]->start == 0) {
 291            link->resource[1]->end = 0;
 292            pr_notice("out of resource for serial\n");
 293        }
 294        ret = pcmcia_request_io(link);
 295        if (ret == 0)
 296                return ret;
 297    }
 298    return ret;
 299}
 300
 301static int ungermann_try_io_port(struct pcmcia_device *link)
 302{
 303    int ret;
 304    unsigned int ioaddr;
 305    /*
 306        Ungermann-Bass Access/CARD accepts 0x300,0x320,0x340,0x360
 307        0x380,0x3c0 only for ioport.
 308    */
 309    for (ioaddr = 0x300; ioaddr < 0x3e0; ioaddr += 0x20) {
 310        link->resource[0]->start = ioaddr;
 311        ret = pcmcia_request_io(link);
 312        if (ret == 0) {
 313            /* calculate ConfigIndex value */
 314            link->config_index =
 315                ((link->resource[0]->start & 0x0f0) >> 3) | 0x22;
 316            return ret;
 317        }
 318    }
 319    return ret; /* RequestIO failed */
 320}
 321
 322static int fmvj18x_ioprobe(struct pcmcia_device *p_dev, void *priv_data)
 323{
 324        return 0; /* strange, but that's what the code did already before... */
 325}
 326
 327static int fmvj18x_config(struct pcmcia_device *link)
 328{
 329    struct net_device *dev = link->priv;
 330    struct local_info *lp = netdev_priv(dev);
 331    int i, ret;
 332    unsigned int ioaddr;
 333    enum cardtype cardtype;
 334    char *card_name = "unknown";
 335    u8 *buf;
 336    size_t len;
 337    u_char buggybuf[32];
 338
 339    dev_dbg(&link->dev, "fmvj18x_config\n");
 340
 341    link->io_lines = 5;
 342
 343    len = pcmcia_get_tuple(link, CISTPL_FUNCE, &buf);
 344    kfree(buf);
 345
 346    if (len) {
 347        /* Yes, I have CISTPL_FUNCE. Let's check CISTPL_MANFID */
 348        ret = pcmcia_loop_config(link, fmvj18x_ioprobe, NULL);
 349        if (ret != 0)
 350                goto failed;
 351
 352        switch (link->manf_id) {
 353        case MANFID_TDK:
 354            cardtype = TDK;
 355            if (link->card_id == PRODID_TDK_GN3410 ||
 356                link->card_id == PRODID_TDK_NP9610 ||
 357                link->card_id == PRODID_TDK_MN3200) {
 358                /* MultiFunction Card */
 359                link->config_base = 0x800;
 360                link->config_index = 0x47;
 361                link->resource[1]->end = 8;
 362            }
 363            break;
 364        case MANFID_NEC:
 365            cardtype = NEC; /* MultiFunction Card */
 366            link->config_base = 0x800;
 367            link->config_index = 0x47;
 368            link->resource[1]->end = 8;
 369            break;
 370        case MANFID_KME:
 371            cardtype = KME; /* MultiFunction Card */
 372            link->config_base = 0x800;
 373            link->config_index = 0x47;
 374            link->resource[1]->end = 8;
 375            break;
 376        case MANFID_CONTEC:
 377            cardtype = CONTEC;
 378            break;
 379        case MANFID_FUJITSU:
 380            if (link->config_base == 0x0fe0)
 381                cardtype = MBH10302;
 382            else if (link->card_id == PRODID_FUJITSU_MBH10302) 
 383                /* RATOC REX-5588/9822/4886's PRODID are 0004(=MBH10302),
 384                   but these are MBH10304 based card. */ 
 385                cardtype = MBH10304;
 386            else if (link->card_id == PRODID_FUJITSU_MBH10304)
 387                cardtype = MBH10304;
 388            else
 389                cardtype = LA501;
 390            break;
 391        default:
 392            cardtype = MBH10304;
 393        }
 394    } else {
 395        /* old type card */
 396        switch (link->manf_id) {
 397        case MANFID_FUJITSU:
 398            if (link->card_id == PRODID_FUJITSU_MBH10304) {
 399                cardtype = XXX10304;    /* MBH10304 with buggy CIS */
 400                link->config_index = 0x20;
 401            } else {
 402                cardtype = MBH10302;    /* NextCom NC5310, etc. */
 403                link->config_index = 1;
 404            }
 405            break;
 406        case MANFID_UNGERMANN:
 407            cardtype = UNGERMANN;
 408            break;
 409        default:
 410            cardtype = MBH10302;
 411            link->config_index = 1;
 412        }
 413    }
 414
 415    if (link->resource[1]->end != 0) {
 416        ret = mfc_try_io_port(link);
 417        if (ret != 0) goto failed;
 418    } else if (cardtype == UNGERMANN) {
 419        ret = ungermann_try_io_port(link);
 420        if (ret != 0) goto failed;
 421    } else { 
 422            ret = pcmcia_request_io(link);
 423            if (ret)
 424                    goto failed;
 425    }
 426    ret = pcmcia_request_irq(link, fjn_interrupt);
 427    if (ret)
 428            goto failed;
 429    ret = pcmcia_enable_device(link);
 430    if (ret)
 431            goto failed;
 432
 433    dev->irq = link->irq;
 434    dev->base_addr = link->resource[0]->start;
 435
 436    if (resource_size(link->resource[1]) != 0) {
 437        ret = fmvj18x_setup_mfc(link);
 438        if (ret != 0) goto failed;
 439    }
 440
 441    ioaddr = dev->base_addr;
 442
 443    /* Reset controller */
 444    if (sram_config == 0) 
 445        outb(CONFIG0_RST, ioaddr + CONFIG_0);
 446    else
 447        outb(CONFIG0_RST_1, ioaddr + CONFIG_0);
 448
 449    /* Power On chip and select bank 0 */
 450    if (cardtype == MBH10302)
 451        outb(BANK_0, ioaddr + CONFIG_1);
 452    else
 453        outb(BANK_0U, ioaddr + CONFIG_1);
 454    
 455    /* Set hardware address */
 456    switch (cardtype) {
 457    case MBH10304:
 458    case TDK:
 459    case LA501:
 460    case CONTEC:
 461    case NEC:
 462    case KME:
 463        if (cardtype == MBH10304) {
 464            card_name = "FMV-J182";
 465
 466            len = pcmcia_get_tuple(link, CISTPL_FUNCE, &buf);
 467            if (len < 11) {
 468                    kfree(buf);
 469                    goto failed;
 470            }
 471            /* Read MACID from CIS */
 472            for (i = 5; i < 11; i++)
 473                    dev->dev_addr[i] = buf[i];
 474            kfree(buf);
 475        } else {
 476            if (pcmcia_get_mac_from_cis(link, dev))
 477                goto failed;
 478            if( cardtype == TDK ) {
 479                card_name = "TDK LAK-CD021";
 480            } else if( cardtype == LA501 ) {
 481                card_name = "LA501";
 482            } else if( cardtype == NEC ) {
 483                card_name = "PK-UG-J001";
 484            } else if( cardtype == KME ) {
 485                card_name = "Panasonic";
 486            } else {
 487                card_name = "C-NET(PC)C";
 488            }
 489        }
 490        break;
 491    case UNGERMANN:
 492        /* Read MACID from register */
 493        for (i = 0; i < 6; i++) 
 494            dev->dev_addr[i] = inb(ioaddr + UNGERMANN_MAC_ID + i);
 495        card_name = "Access/CARD";
 496        break;
 497    case XXX10304:
 498        /* Read MACID from Buggy CIS */
 499        if (fmvj18x_get_hwinfo(link, buggybuf) == -1) {
 500            pr_notice("unable to read hardware net address\n");
 501            goto failed;
 502        }
 503        for (i = 0 ; i < 6; i++) {
 504            dev->dev_addr[i] = buggybuf[i];
 505        }
 506        card_name = "FMV-J182";
 507        break;
 508    case MBH10302:
 509    default:
 510        /* Read MACID from register */
 511        for (i = 0; i < 6; i++) 
 512            dev->dev_addr[i] = inb(ioaddr + MAC_ID + i);
 513        card_name = "FMV-J181";
 514        break;
 515    }
 516
 517    lp->cardtype = cardtype;
 518    SET_NETDEV_DEV(dev, &link->dev);
 519
 520    if (register_netdev(dev) != 0) {
 521        pr_notice("register_netdev() failed\n");
 522        goto failed;
 523    }
 524
 525    /* print current configuration */
 526    netdev_info(dev, "%s, sram %s, port %#3lx, irq %d, hw_addr %pM\n",
 527                card_name, sram_config == 0 ? "4K TX*2" : "8K TX*2",
 528                dev->base_addr, dev->irq, dev->dev_addr);
 529
 530    return 0;
 531    
 532failed:
 533    fmvj18x_release(link);
 534    return -ENODEV;
 535} /* fmvj18x_config */
 536/*====================================================================*/
 537
 538static int fmvj18x_get_hwinfo(struct pcmcia_device *link, u_char *node_id)
 539{
 540    u_char __iomem *base;
 541    int i, j;
 542
 543    /* Allocate a small memory window */
 544    link->resource[2]->flags |= WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE;
 545    link->resource[2]->start = 0; link->resource[2]->end = 0;
 546    i = pcmcia_request_window(link, link->resource[2], 0);
 547    if (i != 0)
 548        return -1;
 549
 550    base = ioremap(link->resource[2]->start, resource_size(link->resource[2]));
 551    pcmcia_map_mem_page(link, link->resource[2], 0);
 552
 553    /*
 554     *  MBH10304 CISTPL_FUNCE_LAN_NODE_ID format
 555     *  22 0d xx xx xx 04 06 yy yy yy yy yy yy ff
 556     *  'xx' is garbage.
 557     *  'yy' is MAC address.
 558    */ 
 559    for (i = 0; i < 0x200; i++) {
 560        if (readb(base+i*2) == 0x22) {  
 561                if (readb(base+(i-1)*2) == 0xff &&
 562                    readb(base+(i+5)*2) == 0x04 &&
 563                    readb(base+(i+6)*2) == 0x06 &&
 564                    readb(base+(i+13)*2) == 0xff)
 565                        break;
 566        }
 567    }
 568
 569    if (i != 0x200) {
 570        for (j = 0 ; j < 6; j++,i++) {
 571            node_id[j] = readb(base+(i+7)*2);
 572        }
 573    }
 574
 575    iounmap(base);
 576    j = pcmcia_release_window(link, link->resource[2]);
 577    return (i != 0x200) ? 0 : -1;
 578
 579} /* fmvj18x_get_hwinfo */
 580/*====================================================================*/
 581
 582static int fmvj18x_setup_mfc(struct pcmcia_device *link)
 583{
 584    int i;
 585    struct net_device *dev = link->priv;
 586    unsigned int ioaddr;
 587    struct local_info *lp = netdev_priv(dev);
 588
 589    /* Allocate a small memory window */
 590    link->resource[3]->flags = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE;
 591    link->resource[3]->start = link->resource[3]->end = 0;
 592    i = pcmcia_request_window(link, link->resource[3], 0);
 593    if (i != 0)
 594        return -1;
 595
 596    lp->base = ioremap(link->resource[3]->start,
 597                       resource_size(link->resource[3]));
 598    if (lp->base == NULL) {
 599        netdev_notice(dev, "ioremap failed\n");
 600        return -1;
 601    }
 602
 603    i = pcmcia_map_mem_page(link, link->resource[3], 0);
 604    if (i != 0) {
 605        iounmap(lp->base);
 606        lp->base = NULL;
 607        return -1;
 608    }
 609    
 610    ioaddr = dev->base_addr;
 611    writeb(0x47, lp->base+0x800);       /* Config Option Register of LAN */
 612    writeb(0x0,  lp->base+0x802);       /* Config and Status Register */
 613
 614    writeb(ioaddr & 0xff, lp->base+0x80a);        /* I/O Base(Low) of LAN */
 615    writeb((ioaddr >> 8) & 0xff, lp->base+0x80c); /* I/O Base(High) of LAN */
 616   
 617    writeb(0x45, lp->base+0x820);       /* Config Option Register of Modem */
 618    writeb(0x8,  lp->base+0x822);       /* Config and Status Register */
 619
 620    return 0;
 621
 622}
 623/*====================================================================*/
 624
 625static void fmvj18x_release(struct pcmcia_device *link)
 626{
 627
 628    struct net_device *dev = link->priv;
 629    struct local_info *lp = netdev_priv(dev);
 630    u_char __iomem *tmp;
 631
 632    dev_dbg(&link->dev, "fmvj18x_release\n");
 633
 634    if (lp->base != NULL) {
 635        tmp = lp->base;
 636        lp->base = NULL;    /* set NULL before iounmap */
 637        iounmap(tmp);
 638    }
 639
 640    pcmcia_disable_device(link);
 641
 642}
 643
 644static int fmvj18x_suspend(struct pcmcia_device *link)
 645{
 646        struct net_device *dev = link->priv;
 647
 648        if (link->open)
 649                netif_device_detach(dev);
 650
 651        return 0;
 652}
 653
 654static int fmvj18x_resume(struct pcmcia_device *link)
 655{
 656        struct net_device *dev = link->priv;
 657
 658        if (link->open) {
 659                fjn_reset(dev);
 660                netif_device_attach(dev);
 661        }
 662
 663        return 0;
 664}
 665
 666/*====================================================================*/
 667
 668static const struct pcmcia_device_id fmvj18x_ids[] = {
 669        PCMCIA_DEVICE_MANF_CARD(0x0004, 0x0004),
 670        PCMCIA_DEVICE_PROD_ID12("EAGLE Technology", "NE200 ETHERNET LAN MBH10302 04", 0x528c88c4, 0x74f91e59),
 671        PCMCIA_DEVICE_PROD_ID12("Eiger Labs,Inc", "EPX-10BT PC Card Ethernet 10BT", 0x53af556e, 0x877f9922),
 672        PCMCIA_DEVICE_PROD_ID12("Eiger labs,Inc.", "EPX-10BT PC Card Ethernet 10BT", 0xf47e6c66, 0x877f9922),
 673        PCMCIA_DEVICE_PROD_ID12("FUJITSU", "LAN Card(FMV-J182)", 0x6ee5a3d8, 0x5baf31db),
 674        PCMCIA_DEVICE_PROD_ID12("FUJITSU", "MBH10308", 0x6ee5a3d8, 0x3f04875e),
 675        PCMCIA_DEVICE_PROD_ID12("FUJITSU TOWA", "LA501", 0xb8451188, 0x12939ba2),
 676        PCMCIA_DEVICE_PROD_ID12("HITACHI", "HT-4840-11", 0xf4f43949, 0x773910f4),
 677        PCMCIA_DEVICE_PROD_ID12("NextComK.K.", "NC5310B Ver1.0       ", 0x8cef4d3a, 0x075fc7b6),
 678        PCMCIA_DEVICE_PROD_ID12("NextComK.K.", "NC5310 Ver1.0        ", 0x8cef4d3a, 0xbccf43e6),
 679        PCMCIA_DEVICE_PROD_ID12("RATOC System Inc.", "10BASE_T CARD R280", 0x85c10e17, 0xd9413666),
 680        PCMCIA_DEVICE_PROD_ID12("TDK", "LAC-CD02x", 0x1eae9475, 0x8fa0ee70),
 681        PCMCIA_DEVICE_PROD_ID12("TDK", "LAC-CF010", 0x1eae9475, 0x7683bc9a),
 682        PCMCIA_DEVICE_PROD_ID1("CONTEC Co.,Ltd.", 0x58d8fee2),
 683        PCMCIA_DEVICE_PROD_ID1("PCMCIA LAN MBH10304  ES", 0x2599f454),
 684        PCMCIA_DEVICE_PROD_ID1("PCMCIA MBH10302", 0x8f4005da),
 685        PCMCIA_DEVICE_PROD_ID1("UBKK,V2.0", 0x90888080),
 686        PCMCIA_PFC_DEVICE_PROD_ID12(0, "TDK", "GlobalNetworker 3410/3412", 0x1eae9475, 0xd9a93bed),
 687        PCMCIA_PFC_DEVICE_PROD_ID12(0, "NEC", "PK-UG-J001" ,0x18df0ba0 ,0x831b1064),
 688        PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0105, 0x0d0a),
 689        PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0105, 0x0e0a),
 690        PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0032, 0x0e01),
 691        PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0032, 0x0a05),
 692        PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0032, 0x0b05),
 693        PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0032, 0x1101),
 694        PCMCIA_DEVICE_NULL,
 695};
 696MODULE_DEVICE_TABLE(pcmcia, fmvj18x_ids);
 697
 698static struct pcmcia_driver fmvj18x_cs_driver = {
 699        .owner          = THIS_MODULE,
 700        .name           = "fmvj18x_cs",
 701        .probe          = fmvj18x_probe,
 702        .remove         = fmvj18x_detach,
 703        .id_table       = fmvj18x_ids,
 704        .suspend        = fmvj18x_suspend,
 705        .resume         = fmvj18x_resume,
 706};
 707module_pcmcia_driver(fmvj18x_cs_driver);
 708
 709/*====================================================================*/
 710
 711static irqreturn_t fjn_interrupt(int dummy, void *dev_id)
 712{
 713    struct net_device *dev = dev_id;
 714    struct local_info *lp = netdev_priv(dev);
 715    unsigned int ioaddr;
 716    unsigned short tx_stat, rx_stat;
 717
 718    ioaddr = dev->base_addr;
 719
 720    /* avoid multiple interrupts */
 721    outw(0x0000, ioaddr + TX_INTR);
 722
 723    /* wait for a while */
 724    udelay(1);
 725
 726    /* get status */
 727    tx_stat = inb(ioaddr + TX_STATUS);
 728    rx_stat = inb(ioaddr + RX_STATUS);
 729
 730    /* clear status */
 731    outb(tx_stat, ioaddr + TX_STATUS);
 732    outb(rx_stat, ioaddr + RX_STATUS);
 733    
 734    pr_debug("%s: interrupt, rx_status %02x.\n", dev->name, rx_stat);
 735    pr_debug("               tx_status %02x.\n", tx_stat);
 736    
 737    if (rx_stat || (inb(ioaddr + RX_MODE) & F_BUF_EMP) == 0) {
 738        /* there is packet(s) in rx buffer */
 739        fjn_rx(dev);
 740    }
 741    if (tx_stat & F_TMT_RDY) {
 742        dev->stats.tx_packets += lp->sent ;
 743        lp->sent = 0 ;
 744        if (lp->tx_queue) {
 745            outb(DO_TX | lp->tx_queue, ioaddr + TX_START);
 746            lp->sent = lp->tx_queue ;
 747            lp->tx_queue = 0;
 748            lp->tx_queue_len = 0;
 749            dev->trans_start = jiffies;
 750        } else {
 751            lp->tx_started = 0;
 752        }
 753        netif_wake_queue(dev);
 754    }
 755    pr_debug("%s: exiting interrupt,\n", dev->name);
 756    pr_debug("    tx_status %02x, rx_status %02x.\n", tx_stat, rx_stat);
 757
 758    outb(D_TX_INTR, ioaddr + TX_INTR);
 759    outb(D_RX_INTR, ioaddr + RX_INTR);
 760
 761    if (lp->base != NULL) {
 762        /* Ack interrupt for multifunction card */
 763        writeb(0x01, lp->base+0x802);
 764        writeb(0x09, lp->base+0x822);
 765    }
 766
 767    return IRQ_HANDLED;
 768
 769} /* fjn_interrupt */
 770
 771/*====================================================================*/
 772
 773static void fjn_tx_timeout(struct net_device *dev)
 774{
 775    struct local_info *lp = netdev_priv(dev);
 776    unsigned int ioaddr = dev->base_addr;
 777
 778    netdev_notice(dev, "transmit timed out with status %04x, %s?\n",
 779                  htons(inw(ioaddr + TX_STATUS)),
 780                  inb(ioaddr + TX_STATUS) & F_TMT_RDY
 781                  ? "IRQ conflict" : "network cable problem");
 782    netdev_notice(dev, "timeout registers: %04x %04x %04x "
 783                  "%04x %04x %04x %04x %04x.\n",
 784                  htons(inw(ioaddr + 0)), htons(inw(ioaddr + 2)),
 785                  htons(inw(ioaddr + 4)), htons(inw(ioaddr + 6)),
 786                  htons(inw(ioaddr + 8)), htons(inw(ioaddr + 10)),
 787                  htons(inw(ioaddr + 12)), htons(inw(ioaddr + 14)));
 788    dev->stats.tx_errors++;
 789    /* ToDo: We should try to restart the adaptor... */
 790    local_irq_disable();
 791    fjn_reset(dev);
 792
 793    lp->tx_started = 0;
 794    lp->tx_queue = 0;
 795    lp->tx_queue_len = 0;
 796    lp->sent = 0;
 797    lp->open_time = jiffies;
 798    local_irq_enable();
 799    netif_wake_queue(dev);
 800}
 801
 802static netdev_tx_t fjn_start_xmit(struct sk_buff *skb,
 803                                        struct net_device *dev)
 804{
 805    struct local_info *lp = netdev_priv(dev);
 806    unsigned int ioaddr = dev->base_addr;
 807    short length = skb->len;
 808    
 809    if (length < ETH_ZLEN)
 810    {
 811        if (skb_padto(skb, ETH_ZLEN))
 812                return NETDEV_TX_OK;
 813        length = ETH_ZLEN;
 814    }
 815
 816    netif_stop_queue(dev);
 817
 818    {
 819        unsigned char *buf = skb->data;
 820
 821        if (length > ETH_FRAME_LEN) {
 822            netdev_notice(dev, "Attempting to send a large packet (%d bytes)\n",
 823                          length);
 824            return NETDEV_TX_BUSY;
 825        }
 826
 827        netdev_dbg(dev, "Transmitting a packet of length %lu\n",
 828                   (unsigned long)skb->len);
 829        dev->stats.tx_bytes += skb->len;
 830
 831        /* Disable both interrupts. */
 832        outw(0x0000, ioaddr + TX_INTR);
 833
 834        /* wait for a while */
 835        udelay(1);
 836
 837        outw(length, ioaddr + DATAPORT);
 838        outsw(ioaddr + DATAPORT, buf, (length + 1) >> 1);
 839
 840        lp->tx_queue++;
 841        lp->tx_queue_len += ((length+3) & ~1);
 842
 843        if (lp->tx_started == 0) {
 844            /* If the Tx is idle, always trigger a transmit. */
 845            outb(DO_TX | lp->tx_queue, ioaddr + TX_START);
 846            lp->sent = lp->tx_queue ;
 847            lp->tx_queue = 0;
 848            lp->tx_queue_len = 0;
 849            lp->tx_started = 1;
 850            netif_start_queue(dev);
 851        } else {
 852            if( sram_config == 0 ) {
 853                if (lp->tx_queue_len < (4096 - (ETH_FRAME_LEN +2)) )
 854                    /* Yes, there is room for one more packet. */
 855                    netif_start_queue(dev);
 856            } else {
 857                if (lp->tx_queue_len < (8192 - (ETH_FRAME_LEN +2)) && 
 858                                                lp->tx_queue < 127 )
 859                    /* Yes, there is room for one more packet. */
 860                    netif_start_queue(dev);
 861            }
 862        }
 863
 864        /* Re-enable interrupts */
 865        outb(D_TX_INTR, ioaddr + TX_INTR);
 866        outb(D_RX_INTR, ioaddr + RX_INTR);
 867    }
 868    dev_kfree_skb (skb);
 869
 870    return NETDEV_TX_OK;
 871} /* fjn_start_xmit */
 872
 873/*====================================================================*/
 874
 875static void fjn_reset(struct net_device *dev)
 876{
 877    struct local_info *lp = netdev_priv(dev);
 878    unsigned int ioaddr = dev->base_addr;
 879    int i;
 880
 881    netdev_dbg(dev, "fjn_reset() called\n");
 882
 883    /* Reset controller */
 884    if( sram_config == 0 ) 
 885        outb(CONFIG0_RST, ioaddr + CONFIG_0);
 886    else
 887        outb(CONFIG0_RST_1, ioaddr + CONFIG_0);
 888
 889    /* Power On chip and select bank 0 */
 890    if (lp->cardtype == MBH10302)
 891        outb(BANK_0, ioaddr + CONFIG_1);
 892    else
 893        outb(BANK_0U, ioaddr + CONFIG_1);
 894
 895    /* Set Tx modes */
 896    outb(D_TX_MODE, ioaddr + TX_MODE);
 897    /* set Rx modes */
 898    outb(ID_MATCHED, ioaddr + RX_MODE);
 899
 900    /* Set hardware address */
 901    for (i = 0; i < 6; i++) 
 902        outb(dev->dev_addr[i], ioaddr + NODE_ID + i);
 903
 904    /* (re)initialize the multicast table */
 905    set_rx_mode(dev);
 906
 907    /* Switch to bank 2 (runtime mode) */
 908    if (lp->cardtype == MBH10302)
 909        outb(BANK_2, ioaddr + CONFIG_1);
 910    else
 911        outb(BANK_2U, ioaddr + CONFIG_1);
 912
 913    /* set 16col ctrl bits */
 914    if( lp->cardtype == TDK || lp->cardtype == CONTEC) 
 915        outb(TDK_AUTO_MODE, ioaddr + COL_CTRL);
 916    else
 917        outb(AUTO_MODE, ioaddr + COL_CTRL);
 918
 919    /* clear Reserved Regs */
 920    outb(0x00, ioaddr + BMPR12);
 921    outb(0x00, ioaddr + BMPR13);
 922
 923    /* reset Skip packet reg. */
 924    outb(0x01, ioaddr + RX_SKIP);
 925
 926    /* Enable Tx and Rx */
 927    if( sram_config == 0 )
 928        outb(CONFIG0_DFL, ioaddr + CONFIG_0);
 929    else
 930        outb(CONFIG0_DFL_1, ioaddr + CONFIG_0);
 931
 932    /* Init receive pointer ? */
 933    inw(ioaddr + DATAPORT);
 934    inw(ioaddr + DATAPORT);
 935
 936    /* Clear all status */
 937    outb(0xff, ioaddr + TX_STATUS);
 938    outb(0xff, ioaddr + RX_STATUS);
 939
 940    if (lp->cardtype == MBH10302)
 941        outb(INTR_OFF, ioaddr + LAN_CTRL);
 942
 943    /* Turn on Rx interrupts */
 944    outb(D_TX_INTR, ioaddr + TX_INTR);
 945    outb(D_RX_INTR, ioaddr + RX_INTR);
 946
 947    /* Turn on interrupts from LAN card controller */
 948    if (lp->cardtype == MBH10302)
 949        outb(INTR_ON, ioaddr + LAN_CTRL);
 950} /* fjn_reset */
 951
 952/*====================================================================*/
 953
 954static void fjn_rx(struct net_device *dev)
 955{
 956    unsigned int ioaddr = dev->base_addr;
 957    int boguscount = 10;        /* 5 -> 10: by agy 19940922 */
 958
 959    pr_debug("%s: in rx_packet(), rx_status %02x.\n",
 960          dev->name, inb(ioaddr + RX_STATUS));
 961
 962    while ((inb(ioaddr + RX_MODE) & F_BUF_EMP) == 0) {
 963        u_short status = inw(ioaddr + DATAPORT);
 964
 965        netdev_dbg(dev, "Rxing packet mode %02x status %04x.\n",
 966                   inb(ioaddr + RX_MODE), status);
 967#ifndef final_version
 968        if (status == 0) {
 969            outb(F_SKP_PKT, ioaddr + RX_SKIP);
 970            break;
 971        }
 972#endif
 973        if ((status & 0xF0) != 0x20) {  /* There was an error. */
 974            dev->stats.rx_errors++;
 975            if (status & F_LEN_ERR) dev->stats.rx_length_errors++;
 976            if (status & F_ALG_ERR) dev->stats.rx_frame_errors++;
 977            if (status & F_CRC_ERR) dev->stats.rx_crc_errors++;
 978            if (status & F_OVR_FLO) dev->stats.rx_over_errors++;
 979        } else {
 980            u_short pkt_len = inw(ioaddr + DATAPORT);
 981            /* Malloc up new buffer. */
 982            struct sk_buff *skb;
 983
 984            if (pkt_len > 1550) {
 985                netdev_notice(dev, "The FMV-18x claimed a very large packet, size %d\n",
 986                              pkt_len);
 987                outb(F_SKP_PKT, ioaddr + RX_SKIP);
 988                dev->stats.rx_errors++;
 989                break;
 990            }
 991            skb = netdev_alloc_skb(dev, pkt_len + 2);
 992            if (skb == NULL) {
 993                outb(F_SKP_PKT, ioaddr + RX_SKIP);
 994                dev->stats.rx_dropped++;
 995                break;
 996            }
 997
 998            skb_reserve(skb, 2);
 999            insw(ioaddr + DATAPORT, skb_put(skb, pkt_len),
1000                 (pkt_len + 1) >> 1);
1001            skb->protocol = eth_type_trans(skb, dev);
1002
1003            {
1004                int i;
1005                pr_debug("%s: Rxed packet of length %d: ",
1006                        dev->name, pkt_len);
1007                for (i = 0; i < 14; i++)
1008                        pr_debug(" %02x", skb->data[i]);
1009                pr_debug(".\n");
1010            }
1011
1012            netif_rx(skb);
1013            dev->stats.rx_packets++;
1014            dev->stats.rx_bytes += pkt_len;
1015        }
1016        if (--boguscount <= 0)
1017            break;
1018    }
1019
1020    /* If any worth-while packets have been received, dev_rint()
1021           has done a netif_wake_queue() for us and will work on them
1022           when we get to the bottom-half routine. */
1023/*
1024    if (lp->cardtype != TDK) {
1025        int i;
1026        for (i = 0; i < 20; i++) {
1027            if ((inb(ioaddr + RX_MODE) & F_BUF_EMP) == F_BUF_EMP)
1028                break;
1029            (void)inw(ioaddr + DATAPORT);  /+ dummy status read +/
1030            outb(F_SKP_PKT, ioaddr + RX_SKIP);
1031        }
1032
1033        if (i > 0)
1034            pr_debug("%s: Exint Rx packet with mode %02x after "
1035                  "%d ticks.\n", dev->name, inb(ioaddr + RX_MODE), i);
1036    }
1037*/
1038} /* fjn_rx */
1039
1040/*====================================================================*/
1041
1042static void netdev_get_drvinfo(struct net_device *dev,
1043                               struct ethtool_drvinfo *info)
1044{
1045        strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
1046        strlcpy(info->version, DRV_VERSION, sizeof(info->version));
1047        snprintf(info->bus_info, sizeof(info->bus_info),
1048                "PCMCIA 0x%lx", dev->base_addr);
1049}
1050
1051static const struct ethtool_ops netdev_ethtool_ops = {
1052        .get_drvinfo            = netdev_get_drvinfo,
1053};
1054
1055static int fjn_config(struct net_device *dev, struct ifmap *map){
1056    return 0;
1057}
1058
1059static int fjn_open(struct net_device *dev)
1060{
1061    struct local_info *lp = netdev_priv(dev);
1062    struct pcmcia_device *link = lp->p_dev;
1063
1064    pr_debug("fjn_open('%s').\n", dev->name);
1065
1066    if (!pcmcia_dev_present(link))
1067        return -ENODEV;
1068    
1069    link->open++;
1070    
1071    fjn_reset(dev);
1072    
1073    lp->tx_started = 0;
1074    lp->tx_queue = 0;
1075    lp->tx_queue_len = 0;
1076    lp->open_time = jiffies;
1077    netif_start_queue(dev);
1078    
1079    return 0;
1080} /* fjn_open */
1081
1082/*====================================================================*/
1083
1084static int fjn_close(struct net_device *dev)
1085{
1086    struct local_info *lp = netdev_priv(dev);
1087    struct pcmcia_device *link = lp->p_dev;
1088    unsigned int ioaddr = dev->base_addr;
1089
1090    pr_debug("fjn_close('%s').\n", dev->name);
1091
1092    lp->open_time = 0;
1093    netif_stop_queue(dev);
1094
1095    /* Set configuration register 0 to disable Tx and Rx. */
1096    if( sram_config == 0 ) 
1097        outb(CONFIG0_RST ,ioaddr + CONFIG_0);
1098    else
1099        outb(CONFIG0_RST_1 ,ioaddr + CONFIG_0);
1100
1101    /* Update the statistics -- ToDo. */
1102
1103    /* Power-down the chip.  Green, green, green! */
1104    outb(CHIP_OFF ,ioaddr + CONFIG_1);
1105
1106    /* Set the ethernet adaptor disable IRQ */
1107    if (lp->cardtype == MBH10302)
1108        outb(INTR_OFF, ioaddr + LAN_CTRL);
1109
1110    link->open--;
1111
1112    return 0;
1113} /* fjn_close */
1114
1115/*====================================================================*/
1116
1117/*
1118  Set the multicast/promiscuous mode for this adaptor.
1119*/
1120
1121static void set_rx_mode(struct net_device *dev)
1122{
1123    unsigned int ioaddr = dev->base_addr;
1124    u_char mc_filter[8];                 /* Multicast hash filter */
1125    u_long flags;
1126    int i;
1127    
1128    int saved_bank;
1129    int saved_config_0 = inb(ioaddr + CONFIG_0);
1130     
1131    local_irq_save(flags); 
1132
1133    /* Disable Tx and Rx */
1134    if (sram_config == 0) 
1135        outb(CONFIG0_RST, ioaddr + CONFIG_0);
1136    else
1137        outb(CONFIG0_RST_1, ioaddr + CONFIG_0);
1138
1139    if (dev->flags & IFF_PROMISC) {
1140        memset(mc_filter, 0xff, sizeof(mc_filter));
1141        outb(3, ioaddr + RX_MODE);      /* Enable promiscuous mode */
1142    } else if (netdev_mc_count(dev) > MC_FILTERBREAK ||
1143               (dev->flags & IFF_ALLMULTI)) {
1144        /* Too many to filter perfectly -- accept all multicasts. */
1145        memset(mc_filter, 0xff, sizeof(mc_filter));
1146        outb(2, ioaddr + RX_MODE);      /* Use normal mode. */
1147    } else if (netdev_mc_empty(dev)) {
1148        memset(mc_filter, 0x00, sizeof(mc_filter));
1149        outb(1, ioaddr + RX_MODE);      /* Ignore almost all multicasts. */
1150    } else {
1151        struct netdev_hw_addr *ha;
1152
1153        memset(mc_filter, 0, sizeof(mc_filter));
1154        netdev_for_each_mc_addr(ha, dev) {
1155            unsigned int bit = ether_crc_le(ETH_ALEN, ha->addr) >> 26;
1156            mc_filter[bit >> 3] |= (1 << (bit & 7));
1157        }
1158        outb(2, ioaddr + RX_MODE);      /* Use normal mode. */
1159    }
1160
1161    /* Switch to bank 1 and set the multicast table. */
1162    saved_bank = inb(ioaddr + CONFIG_1);
1163    outb(0xe4, ioaddr + CONFIG_1);
1164
1165    for (i = 0; i < 8; i++)
1166        outb(mc_filter[i], ioaddr + MAR_ADR + i);
1167    outb(saved_bank, ioaddr + CONFIG_1);
1168
1169    outb(saved_config_0, ioaddr + CONFIG_0);
1170
1171    local_irq_restore(flags);
1172}
1173