linux/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
<<
>>
Prefs
   1/*
   2 * Copyright (c) 2010 Broadcom Corporation
   3 * Copyright (c) 2013 Hauke Mehrtens <hauke@hauke-m.de>
   4 *
   5 * Permission to use, copy, modify, and/or distribute this software for any
   6 * purpose with or without fee is hereby granted, provided that the above
   7 * copyright notice and this permission notice appear in all copies.
   8 *
   9 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
  10 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
  11 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
  12 * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
  13 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
  14 * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
  15 * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  16 */
  17
  18#define __UNDEF_NO_VERSION__
  19#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  20
  21#include <linux/etherdevice.h>
  22#include <linux/sched.h>
  23#include <linux/firmware.h>
  24#include <linux/interrupt.h>
  25#include <linux/module.h>
  26#include <linux/bcma/bcma.h>
  27#include <net/mac80211.h>
  28#include <defs.h>
  29#include "phy/phy_int.h"
  30#include "d11.h"
  31#include "channel.h"
  32#include "scb.h"
  33#include "pub.h"
  34#include "ucode_loader.h"
  35#include "mac80211_if.h"
  36#include "main.h"
  37#include "debug.h"
  38#include "led.h"
  39
  40#define N_TX_QUEUES     4 /* #tx queues on mac80211<->driver interface */
  41#define BRCMS_FLUSH_TIMEOUT     500 /* msec */
  42
  43/* Flags we support */
  44#define MAC_FILTERS (FIF_PROMISC_IN_BSS | \
  45        FIF_ALLMULTI | \
  46        FIF_FCSFAIL | \
  47        FIF_CONTROL | \
  48        FIF_OTHER_BSS | \
  49        FIF_BCN_PRBRESP_PROMISC | \
  50        FIF_PSPOLL)
  51
  52#define CHAN2GHZ(channel, freqency, chflags)  { \
  53        .band = IEEE80211_BAND_2GHZ, \
  54        .center_freq = (freqency), \
  55        .hw_value = (channel), \
  56        .flags = chflags, \
  57        .max_antenna_gain = 0, \
  58        .max_power = 19, \
  59}
  60
  61#define CHAN5GHZ(channel, chflags)  { \
  62        .band = IEEE80211_BAND_5GHZ, \
  63        .center_freq = 5000 + 5*(channel), \
  64        .hw_value = (channel), \
  65        .flags = chflags, \
  66        .max_antenna_gain = 0, \
  67        .max_power = 21, \
  68}
  69
  70#define RATE(rate100m, _flags) { \
  71        .bitrate = (rate100m), \
  72        .flags = (_flags), \
  73        .hw_value = (rate100m / 5), \
  74}
  75
  76struct firmware_hdr {
  77        __le32 offset;
  78        __le32 len;
  79        __le32 idx;
  80};
  81
  82static const char * const brcms_firmwares[MAX_FW_IMAGES] = {
  83        "brcm/bcm43xx",
  84        NULL
  85};
  86
  87static int n_adapters_found;
  88
  89MODULE_AUTHOR("Broadcom Corporation");
  90MODULE_DESCRIPTION("Broadcom 802.11n wireless LAN driver.");
  91MODULE_SUPPORTED_DEVICE("Broadcom 802.11n WLAN cards");
  92MODULE_LICENSE("Dual BSD/GPL");
  93/* This needs to be adjusted when brcms_firmwares changes */
  94MODULE_FIRMWARE("brcm/bcm43xx-0.fw");
  95MODULE_FIRMWARE("brcm/bcm43xx_hdr-0.fw");
  96
  97/* recognized BCMA Core IDs */
  98static struct bcma_device_id brcms_coreid_table[] = {
  99        BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 17, BCMA_ANY_CLASS),
 100        BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 23, BCMA_ANY_CLASS),
 101        BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 24, BCMA_ANY_CLASS),
 102        BCMA_CORETABLE_END
 103};
 104MODULE_DEVICE_TABLE(bcma, brcms_coreid_table);
 105
 106#if defined(CONFIG_BRCMDBG)
 107/*
 108 * Module parameter for setting the debug message level. Available
 109 * flags are specified by the BRCM_DL_* macros in
 110 * drivers/net/wireless/brcm80211/include/defs.h.
 111 */
 112module_param_named(debug, brcm_msg_level, uint, S_IRUGO | S_IWUSR);
 113#endif
 114
 115static struct ieee80211_channel brcms_2ghz_chantable[] = {
 116        CHAN2GHZ(1, 2412, IEEE80211_CHAN_NO_HT40MINUS),
 117        CHAN2GHZ(2, 2417, IEEE80211_CHAN_NO_HT40MINUS),
 118        CHAN2GHZ(3, 2422, IEEE80211_CHAN_NO_HT40MINUS),
 119        CHAN2GHZ(4, 2427, IEEE80211_CHAN_NO_HT40MINUS),
 120        CHAN2GHZ(5, 2432, 0),
 121        CHAN2GHZ(6, 2437, 0),
 122        CHAN2GHZ(7, 2442, 0),
 123        CHAN2GHZ(8, 2447, IEEE80211_CHAN_NO_HT40PLUS),
 124        CHAN2GHZ(9, 2452, IEEE80211_CHAN_NO_HT40PLUS),
 125        CHAN2GHZ(10, 2457, IEEE80211_CHAN_NO_HT40PLUS),
 126        CHAN2GHZ(11, 2462, IEEE80211_CHAN_NO_HT40PLUS),
 127        CHAN2GHZ(12, 2467,
 128                 IEEE80211_CHAN_NO_IR |
 129                 IEEE80211_CHAN_NO_HT40PLUS),
 130        CHAN2GHZ(13, 2472,
 131                 IEEE80211_CHAN_NO_IR |
 132                 IEEE80211_CHAN_NO_HT40PLUS),
 133        CHAN2GHZ(14, 2484,
 134                 IEEE80211_CHAN_NO_IR |
 135                 IEEE80211_CHAN_NO_HT40PLUS | IEEE80211_CHAN_NO_HT40MINUS |
 136                 IEEE80211_CHAN_NO_OFDM)
 137};
 138
 139static struct ieee80211_channel brcms_5ghz_nphy_chantable[] = {
 140        /* UNII-1 */
 141        CHAN5GHZ(36, IEEE80211_CHAN_NO_HT40MINUS),
 142        CHAN5GHZ(40, IEEE80211_CHAN_NO_HT40PLUS),
 143        CHAN5GHZ(44, IEEE80211_CHAN_NO_HT40MINUS),
 144        CHAN5GHZ(48, IEEE80211_CHAN_NO_HT40PLUS),
 145        /* UNII-2 */
 146        CHAN5GHZ(52,
 147                 IEEE80211_CHAN_RADAR |
 148                 IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40MINUS),
 149        CHAN5GHZ(56,
 150                 IEEE80211_CHAN_RADAR |
 151                 IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40PLUS),
 152        CHAN5GHZ(60,
 153                 IEEE80211_CHAN_RADAR |
 154                 IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40MINUS),
 155        CHAN5GHZ(64,
 156                 IEEE80211_CHAN_RADAR |
 157                 IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40PLUS),
 158        /* MID */
 159        CHAN5GHZ(100,
 160                 IEEE80211_CHAN_RADAR |
 161                 IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40MINUS),
 162        CHAN5GHZ(104,
 163                 IEEE80211_CHAN_RADAR |
 164                 IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40PLUS),
 165        CHAN5GHZ(108,
 166                 IEEE80211_CHAN_RADAR |
 167                 IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40MINUS),
 168        CHAN5GHZ(112,
 169                 IEEE80211_CHAN_RADAR |
 170                 IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40PLUS),
 171        CHAN5GHZ(116,
 172                 IEEE80211_CHAN_RADAR |
 173                 IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40MINUS),
 174        CHAN5GHZ(120,
 175                 IEEE80211_CHAN_RADAR |
 176                 IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40PLUS),
 177        CHAN5GHZ(124,
 178                 IEEE80211_CHAN_RADAR |
 179                 IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40MINUS),
 180        CHAN5GHZ(128,
 181                 IEEE80211_CHAN_RADAR |
 182                 IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40PLUS),
 183        CHAN5GHZ(132,
 184                 IEEE80211_CHAN_RADAR |
 185                 IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40MINUS),
 186        CHAN5GHZ(136,
 187                 IEEE80211_CHAN_RADAR |
 188                 IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40PLUS),
 189        CHAN5GHZ(140,
 190                 IEEE80211_CHAN_RADAR |
 191                 IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40PLUS |
 192                 IEEE80211_CHAN_NO_HT40MINUS),
 193        /* UNII-3 */
 194        CHAN5GHZ(149, IEEE80211_CHAN_NO_HT40MINUS),
 195        CHAN5GHZ(153, IEEE80211_CHAN_NO_HT40PLUS),
 196        CHAN5GHZ(157, IEEE80211_CHAN_NO_HT40MINUS),
 197        CHAN5GHZ(161, IEEE80211_CHAN_NO_HT40PLUS),
 198        CHAN5GHZ(165, IEEE80211_CHAN_NO_HT40PLUS | IEEE80211_CHAN_NO_HT40MINUS)
 199};
 200
 201/*
 202 * The rate table is used for both 2.4G and 5G rates. The
 203 * latter being a subset as it does not support CCK rates.
 204 */
 205static struct ieee80211_rate legacy_ratetable[] = {
 206        RATE(10, 0),
 207        RATE(20, IEEE80211_RATE_SHORT_PREAMBLE),
 208        RATE(55, IEEE80211_RATE_SHORT_PREAMBLE),
 209        RATE(110, IEEE80211_RATE_SHORT_PREAMBLE),
 210        RATE(60, 0),
 211        RATE(90, 0),
 212        RATE(120, 0),
 213        RATE(180, 0),
 214        RATE(240, 0),
 215        RATE(360, 0),
 216        RATE(480, 0),
 217        RATE(540, 0),
 218};
 219
 220static const struct ieee80211_supported_band brcms_band_2GHz_nphy_template = {
 221        .band = IEEE80211_BAND_2GHZ,
 222        .channels = brcms_2ghz_chantable,
 223        .n_channels = ARRAY_SIZE(brcms_2ghz_chantable),
 224        .bitrates = legacy_ratetable,
 225        .n_bitrates = ARRAY_SIZE(legacy_ratetable),
 226        .ht_cap = {
 227                   /* from include/linux/ieee80211.h */
 228                   .cap = IEEE80211_HT_CAP_GRN_FLD |
 229                          IEEE80211_HT_CAP_SGI_20 | IEEE80211_HT_CAP_SGI_40,
 230                   .ht_supported = true,
 231                   .ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K,
 232                   .ampdu_density = AMPDU_DEF_MPDU_DENSITY,
 233                   .mcs = {
 234                           /* placeholders for now */
 235                           .rx_mask = {0xff, 0xff, 0, 0, 0, 0, 0, 0, 0, 0},
 236                           .rx_highest = cpu_to_le16(500),
 237                           .tx_params = IEEE80211_HT_MCS_TX_DEFINED}
 238                   }
 239};
 240
 241static const struct ieee80211_supported_band brcms_band_5GHz_nphy_template = {
 242        .band = IEEE80211_BAND_5GHZ,
 243        .channels = brcms_5ghz_nphy_chantable,
 244        .n_channels = ARRAY_SIZE(brcms_5ghz_nphy_chantable),
 245        .bitrates = legacy_ratetable + BRCMS_LEGACY_5G_RATE_OFFSET,
 246        .n_bitrates = ARRAY_SIZE(legacy_ratetable) -
 247                        BRCMS_LEGACY_5G_RATE_OFFSET,
 248        .ht_cap = {
 249                   .cap = IEEE80211_HT_CAP_GRN_FLD | IEEE80211_HT_CAP_SGI_20 |
 250                          IEEE80211_HT_CAP_SGI_40,
 251                   .ht_supported = true,
 252                   .ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K,
 253                   .ampdu_density = AMPDU_DEF_MPDU_DENSITY,
 254                   .mcs = {
 255                           /* placeholders for now */
 256                           .rx_mask = {0xff, 0xff, 0, 0, 0, 0, 0, 0, 0, 0},
 257                           .rx_highest = cpu_to_le16(500),
 258                           .tx_params = IEEE80211_HT_MCS_TX_DEFINED}
 259                   }
 260};
 261
 262/* flags the given rate in rateset as requested */
 263static void brcms_set_basic_rate(struct brcm_rateset *rs, u16 rate, bool is_br)
 264{
 265        u32 i;
 266
 267        for (i = 0; i < rs->count; i++) {
 268                if (rate != (rs->rates[i] & 0x7f))
 269                        continue;
 270
 271                if (is_br)
 272                        rs->rates[i] |= BRCMS_RATE_FLAG;
 273                else
 274                        rs->rates[i] &= BRCMS_RATE_MASK;
 275                return;
 276        }
 277}
 278
 279/**
 280 * This function frees the WL per-device resources.
 281 *
 282 * This function frees resources owned by the WL device pointed to
 283 * by the wl parameter.
 284 *
 285 * precondition: can both be called locked and unlocked
 286 *
 287 */
 288static void brcms_free(struct brcms_info *wl)
 289{
 290        struct brcms_timer *t, *next;
 291
 292        /* free ucode data */
 293        if (wl->fw.fw_cnt)
 294                brcms_ucode_data_free(&wl->ucode);
 295        if (wl->irq)
 296                free_irq(wl->irq, wl);
 297
 298        /* kill dpc */
 299        tasklet_kill(&wl->tasklet);
 300
 301        if (wl->pub) {
 302                brcms_debugfs_detach(wl->pub);
 303                brcms_c_module_unregister(wl->pub, "linux", wl);
 304        }
 305
 306        /* free common resources */
 307        if (wl->wlc) {
 308                brcms_c_detach(wl->wlc);
 309                wl->wlc = NULL;
 310                wl->pub = NULL;
 311        }
 312
 313        /* virtual interface deletion is deferred so we cannot spinwait */
 314
 315        /* wait for all pending callbacks to complete */
 316        while (atomic_read(&wl->callbacks) > 0)
 317                schedule();
 318
 319        /* free timers */
 320        for (t = wl->timers; t; t = next) {
 321                next = t->next;
 322#ifdef DEBUG
 323                kfree(t->name);
 324#endif
 325                kfree(t);
 326        }
 327}
 328
 329/*
 330* called from both kernel as from this kernel module (error flow on attach)
 331* precondition: perimeter lock is not acquired.
 332*/
 333static void brcms_remove(struct bcma_device *pdev)
 334{
 335        struct ieee80211_hw *hw = bcma_get_drvdata(pdev);
 336        struct brcms_info *wl = hw->priv;
 337
 338        if (wl->wlc) {
 339                brcms_led_unregister(wl);
 340                wiphy_rfkill_set_hw_state(wl->pub->ieee_hw->wiphy, false);
 341                wiphy_rfkill_stop_polling(wl->pub->ieee_hw->wiphy);
 342                ieee80211_unregister_hw(hw);
 343        }
 344
 345        brcms_free(wl);
 346
 347        bcma_set_drvdata(pdev, NULL);
 348        ieee80211_free_hw(hw);
 349}
 350
 351/*
 352 * Precondition: Since this function is called in brcms_pci_probe() context,
 353 * no locking is required.
 354 */
 355static void brcms_release_fw(struct brcms_info *wl)
 356{
 357        int i;
 358        for (i = 0; i < MAX_FW_IMAGES; i++) {
 359                release_firmware(wl->fw.fw_bin[i]);
 360                release_firmware(wl->fw.fw_hdr[i]);
 361        }
 362}
 363
 364/*
 365 * Precondition: Since this function is called in brcms_pci_probe() context,
 366 * no locking is required.
 367 */
 368static int brcms_request_fw(struct brcms_info *wl, struct bcma_device *pdev)
 369{
 370        int status;
 371        struct device *device = &pdev->dev;
 372        char fw_name[100];
 373        int i;
 374
 375        memset(&wl->fw, 0, sizeof(struct brcms_firmware));
 376        for (i = 0; i < MAX_FW_IMAGES; i++) {
 377                if (brcms_firmwares[i] == NULL)
 378                        break;
 379                sprintf(fw_name, "%s-%d.fw", brcms_firmwares[i],
 380                        UCODE_LOADER_API_VER);
 381                status = request_firmware(&wl->fw.fw_bin[i], fw_name, device);
 382                if (status) {
 383                        wiphy_err(wl->wiphy, "%s: fail to load firmware %s\n",
 384                                  KBUILD_MODNAME, fw_name);
 385                        return status;
 386                }
 387                sprintf(fw_name, "%s_hdr-%d.fw", brcms_firmwares[i],
 388                        UCODE_LOADER_API_VER);
 389                status = request_firmware(&wl->fw.fw_hdr[i], fw_name, device);
 390                if (status) {
 391                        wiphy_err(wl->wiphy, "%s: fail to load firmware %s\n",
 392                                  KBUILD_MODNAME, fw_name);
 393                        return status;
 394                }
 395                wl->fw.hdr_num_entries[i] =
 396                    wl->fw.fw_hdr[i]->size / (sizeof(struct firmware_hdr));
 397        }
 398        wl->fw.fw_cnt = i;
 399        status = brcms_ucode_data_init(wl, &wl->ucode);
 400        brcms_release_fw(wl);
 401        return status;
 402}
 403
 404static void brcms_ops_tx(struct ieee80211_hw *hw,
 405                         struct ieee80211_tx_control *control,
 406                         struct sk_buff *skb)
 407{
 408        struct brcms_info *wl = hw->priv;
 409        struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
 410
 411        spin_lock_bh(&wl->lock);
 412        if (!wl->pub->up) {
 413                brcms_err(wl->wlc->hw->d11core, "ops->tx called while down\n");
 414                kfree_skb(skb);
 415                goto done;
 416        }
 417        if (brcms_c_sendpkt_mac80211(wl->wlc, skb, hw))
 418                tx_info->rate_driver_data[0] = control->sta;
 419 done:
 420        spin_unlock_bh(&wl->lock);
 421}
 422
 423static int brcms_ops_start(struct ieee80211_hw *hw)
 424{
 425        struct brcms_info *wl = hw->priv;
 426        bool blocked;
 427        int err;
 428
 429        if (!wl->ucode.bcm43xx_bomminor) {
 430                err = brcms_request_fw(wl, wl->wlc->hw->d11core);
 431                if (err)
 432                        return -ENOENT;
 433        }
 434
 435        ieee80211_wake_queues(hw);
 436        spin_lock_bh(&wl->lock);
 437        blocked = brcms_rfkill_set_hw_state(wl);
 438        spin_unlock_bh(&wl->lock);
 439        if (!blocked)
 440                wiphy_rfkill_stop_polling(wl->pub->ieee_hw->wiphy);
 441
 442        spin_lock_bh(&wl->lock);
 443        /* avoid acknowledging frames before a non-monitor device is added */
 444        wl->mute_tx = true;
 445
 446        if (!wl->pub->up)
 447                if (!blocked)
 448                        err = brcms_up(wl);
 449                else
 450                        err = -ERFKILL;
 451        else
 452                err = -ENODEV;
 453        spin_unlock_bh(&wl->lock);
 454
 455        if (err != 0)
 456                brcms_err(wl->wlc->hw->d11core, "%s: brcms_up() returned %d\n",
 457                          __func__, err);
 458
 459        bcma_core_pci_power_save(wl->wlc->hw->d11core->bus, true);
 460        return err;
 461}
 462
 463static void brcms_ops_stop(struct ieee80211_hw *hw)
 464{
 465        struct brcms_info *wl = hw->priv;
 466        int status;
 467
 468        ieee80211_stop_queues(hw);
 469
 470        if (wl->wlc == NULL)
 471                return;
 472
 473        spin_lock_bh(&wl->lock);
 474        status = brcms_c_chipmatch(wl->wlc->hw->d11core);
 475        spin_unlock_bh(&wl->lock);
 476        if (!status) {
 477                brcms_err(wl->wlc->hw->d11core,
 478                          "wl: brcms_ops_stop: chipmatch failed\n");
 479                return;
 480        }
 481
 482        bcma_core_pci_power_save(wl->wlc->hw->d11core->bus, false);
 483
 484        /* put driver in down state */
 485        spin_lock_bh(&wl->lock);
 486        brcms_down(wl);
 487        spin_unlock_bh(&wl->lock);
 488}
 489
 490static int
 491brcms_ops_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
 492{
 493        struct brcms_info *wl = hw->priv;
 494
 495        /* Just STA, AP and ADHOC for now */
 496        if (vif->type != NL80211_IFTYPE_STATION &&
 497            vif->type != NL80211_IFTYPE_AP &&
 498            vif->type != NL80211_IFTYPE_ADHOC) {
 499                brcms_err(wl->wlc->hw->d11core,
 500                          "%s: Attempt to add type %d, only STA, AP and AdHoc for now\n",
 501                          __func__, vif->type);
 502                return -EOPNOTSUPP;
 503        }
 504
 505        spin_lock_bh(&wl->lock);
 506        wl->mute_tx = false;
 507        brcms_c_mute(wl->wlc, false);
 508        if (vif->type == NL80211_IFTYPE_STATION)
 509                brcms_c_start_station(wl->wlc, vif->addr);
 510        else if (vif->type == NL80211_IFTYPE_AP)
 511                brcms_c_start_ap(wl->wlc, vif->addr, vif->bss_conf.bssid,
 512                                 vif->bss_conf.ssid, vif->bss_conf.ssid_len);
 513        else if (vif->type == NL80211_IFTYPE_ADHOC)
 514                brcms_c_start_adhoc(wl->wlc, vif->addr);
 515        spin_unlock_bh(&wl->lock);
 516
 517        return 0;
 518}
 519
 520static void
 521brcms_ops_remove_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
 522{
 523}
 524
 525static int brcms_ops_config(struct ieee80211_hw *hw, u32 changed)
 526{
 527        struct ieee80211_conf *conf = &hw->conf;
 528        struct brcms_info *wl = hw->priv;
 529        struct bcma_device *core = wl->wlc->hw->d11core;
 530        int err = 0;
 531        int new_int;
 532
 533        spin_lock_bh(&wl->lock);
 534        if (changed & IEEE80211_CONF_CHANGE_LISTEN_INTERVAL) {
 535                brcms_c_set_beacon_listen_interval(wl->wlc,
 536                                                   conf->listen_interval);
 537        }
 538        if (changed & IEEE80211_CONF_CHANGE_MONITOR)
 539                brcms_dbg_info(core, "%s: change monitor mode: %s\n",
 540                               __func__, conf->flags & IEEE80211_CONF_MONITOR ?
 541                               "true" : "false");
 542        if (changed & IEEE80211_CONF_CHANGE_PS)
 543                brcms_err(core, "%s: change power-save mode: %s (implement)\n",
 544                          __func__, conf->flags & IEEE80211_CONF_PS ?
 545                          "true" : "false");
 546
 547        if (changed & IEEE80211_CONF_CHANGE_POWER) {
 548                err = brcms_c_set_tx_power(wl->wlc, conf->power_level);
 549                if (err < 0) {
 550                        brcms_err(core, "%s: Error setting power_level\n",
 551                                  __func__);
 552                        goto config_out;
 553                }
 554                new_int = brcms_c_get_tx_power(wl->wlc);
 555                if (new_int != conf->power_level)
 556                        brcms_err(core,
 557                                  "%s: Power level req != actual, %d %d\n",
 558                                  __func__, conf->power_level,
 559                                  new_int);
 560        }
 561        if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
 562                if (conf->chandef.width == NL80211_CHAN_WIDTH_20 ||
 563                    conf->chandef.width == NL80211_CHAN_WIDTH_20_NOHT)
 564                        err = brcms_c_set_channel(wl->wlc,
 565                                                  conf->chandef.chan->hw_value);
 566                else
 567                        err = -ENOTSUPP;
 568        }
 569        if (changed & IEEE80211_CONF_CHANGE_RETRY_LIMITS)
 570                err = brcms_c_set_rate_limit(wl->wlc,
 571                                             conf->short_frame_max_tx_count,
 572                                             conf->long_frame_max_tx_count);
 573
 574 config_out:
 575        spin_unlock_bh(&wl->lock);
 576        return err;
 577}
 578
 579static void
 580brcms_ops_bss_info_changed(struct ieee80211_hw *hw,
 581                        struct ieee80211_vif *vif,
 582                        struct ieee80211_bss_conf *info, u32 changed)
 583{
 584        struct brcms_info *wl = hw->priv;
 585        struct bcma_device *core = wl->wlc->hw->d11core;
 586
 587        if (changed & BSS_CHANGED_ASSOC) {
 588                /* association status changed (associated/disassociated)
 589                 * also implies a change in the AID.
 590                 */
 591                brcms_err(core, "%s: %s: %sassociated\n", KBUILD_MODNAME,
 592                          __func__, info->assoc ? "" : "dis");
 593                spin_lock_bh(&wl->lock);
 594                brcms_c_associate_upd(wl->wlc, info->assoc);
 595                spin_unlock_bh(&wl->lock);
 596        }
 597        if (changed & BSS_CHANGED_ERP_SLOT) {
 598                s8 val;
 599
 600                /* slot timing changed */
 601                if (info->use_short_slot)
 602                        val = 1;
 603                else
 604                        val = 0;
 605                spin_lock_bh(&wl->lock);
 606                brcms_c_set_shortslot_override(wl->wlc, val);
 607                spin_unlock_bh(&wl->lock);
 608        }
 609
 610        if (changed & BSS_CHANGED_HT) {
 611                /* 802.11n parameters changed */
 612                u16 mode = info->ht_operation_mode;
 613
 614                spin_lock_bh(&wl->lock);
 615                brcms_c_protection_upd(wl->wlc, BRCMS_PROT_N_CFG,
 616                        mode & IEEE80211_HT_OP_MODE_PROTECTION);
 617                brcms_c_protection_upd(wl->wlc, BRCMS_PROT_N_NONGF,
 618                        mode & IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT);
 619                brcms_c_protection_upd(wl->wlc, BRCMS_PROT_N_OBSS,
 620                        mode & IEEE80211_HT_OP_MODE_NON_HT_STA_PRSNT);
 621                spin_unlock_bh(&wl->lock);
 622        }
 623        if (changed & BSS_CHANGED_BASIC_RATES) {
 624                struct ieee80211_supported_band *bi;
 625                u32 br_mask, i;
 626                u16 rate;
 627                struct brcm_rateset rs;
 628                int error;
 629
 630                /* retrieve the current rates */
 631                spin_lock_bh(&wl->lock);
 632                brcms_c_get_current_rateset(wl->wlc, &rs);
 633                spin_unlock_bh(&wl->lock);
 634
 635                br_mask = info->basic_rates;
 636                bi = hw->wiphy->bands[brcms_c_get_curband(wl->wlc)];
 637                for (i = 0; i < bi->n_bitrates; i++) {
 638                        /* convert to internal rate value */
 639                        rate = (bi->bitrates[i].bitrate << 1) / 10;
 640
 641                        /* set/clear basic rate flag */
 642                        brcms_set_basic_rate(&rs, rate, br_mask & 1);
 643                        br_mask >>= 1;
 644                }
 645
 646                /* update the rate set */
 647                spin_lock_bh(&wl->lock);
 648                error = brcms_c_set_rateset(wl->wlc, &rs);
 649                spin_unlock_bh(&wl->lock);
 650                if (error)
 651                        brcms_err(core, "changing basic rates failed: %d\n",
 652                                  error);
 653        }
 654        if (changed & BSS_CHANGED_BEACON_INT) {
 655                /* Beacon interval changed */
 656                spin_lock_bh(&wl->lock);
 657                brcms_c_set_beacon_period(wl->wlc, info->beacon_int);
 658                spin_unlock_bh(&wl->lock);
 659        }
 660        if (changed & BSS_CHANGED_BSSID) {
 661                /* BSSID changed, for whatever reason (IBSS and managed mode) */
 662                spin_lock_bh(&wl->lock);
 663                brcms_c_set_addrmatch(wl->wlc, RCM_BSSID_OFFSET, info->bssid);
 664                spin_unlock_bh(&wl->lock);
 665        }
 666        if (changed & BSS_CHANGED_SSID) {
 667                /* BSSID changed, for whatever reason (IBSS and managed mode) */
 668                spin_lock_bh(&wl->lock);
 669                brcms_c_set_ssid(wl->wlc, info->ssid, info->ssid_len);
 670                spin_unlock_bh(&wl->lock);
 671        }
 672        if (changed & BSS_CHANGED_BEACON) {
 673                /* Beacon data changed, retrieve new beacon (beaconing modes) */
 674                struct sk_buff *beacon;
 675                u16 tim_offset = 0;
 676
 677                spin_lock_bh(&wl->lock);
 678                beacon = ieee80211_beacon_get_tim(hw, vif, &tim_offset, NULL);
 679                brcms_c_set_new_beacon(wl->wlc, beacon, tim_offset,
 680                                       info->dtim_period);
 681                spin_unlock_bh(&wl->lock);
 682        }
 683
 684        if (changed & BSS_CHANGED_AP_PROBE_RESP) {
 685                struct sk_buff *probe_resp;
 686
 687                spin_lock_bh(&wl->lock);
 688                probe_resp = ieee80211_proberesp_get(hw, vif);
 689                brcms_c_set_new_probe_resp(wl->wlc, probe_resp);
 690                spin_unlock_bh(&wl->lock);
 691        }
 692
 693        if (changed & BSS_CHANGED_BEACON_ENABLED) {
 694                /* Beaconing should be enabled/disabled (beaconing modes) */
 695                brcms_err(core, "%s: Beacon enabled: %s\n", __func__,
 696                          info->enable_beacon ? "true" : "false");
 697                if (info->enable_beacon &&
 698                    hw->wiphy->flags & WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD) {
 699                        brcms_c_enable_probe_resp(wl->wlc, true);
 700                } else {
 701                        brcms_c_enable_probe_resp(wl->wlc, false);
 702                }
 703        }
 704
 705        if (changed & BSS_CHANGED_CQM) {
 706                /* Connection quality monitor config changed */
 707                brcms_err(core, "%s: cqm change: threshold %d, hys %d "
 708                          " (implement)\n", __func__, info->cqm_rssi_thold,
 709                          info->cqm_rssi_hyst);
 710        }
 711
 712        if (changed & BSS_CHANGED_IBSS) {
 713                /* IBSS join status changed */
 714                brcms_err(core, "%s: IBSS joined: %s (implement)\n",
 715                          __func__, info->ibss_joined ? "true" : "false");
 716        }
 717
 718        if (changed & BSS_CHANGED_ARP_FILTER) {
 719                /* Hardware ARP filter address list or state changed */
 720                brcms_err(core, "%s: arp filtering: %d addresses"
 721                          " (implement)\n", __func__, info->arp_addr_cnt);
 722        }
 723
 724        if (changed & BSS_CHANGED_QOS) {
 725                /*
 726                 * QoS for this association was enabled/disabled.
 727                 * Note that it is only ever disabled for station mode.
 728                 */
 729                brcms_err(core, "%s: qos enabled: %s (implement)\n",
 730                          __func__, info->qos ? "true" : "false");
 731        }
 732        return;
 733}
 734
 735static void
 736brcms_ops_configure_filter(struct ieee80211_hw *hw,
 737                        unsigned int changed_flags,
 738                        unsigned int *total_flags, u64 multicast)
 739{
 740        struct brcms_info *wl = hw->priv;
 741        struct bcma_device *core = wl->wlc->hw->d11core;
 742
 743        changed_flags &= MAC_FILTERS;
 744        *total_flags &= MAC_FILTERS;
 745
 746        if (changed_flags & FIF_PROMISC_IN_BSS)
 747                brcms_dbg_info(core, "FIF_PROMISC_IN_BSS\n");
 748        if (changed_flags & FIF_ALLMULTI)
 749                brcms_dbg_info(core, "FIF_ALLMULTI\n");
 750        if (changed_flags & FIF_FCSFAIL)
 751                brcms_dbg_info(core, "FIF_FCSFAIL\n");
 752        if (changed_flags & FIF_CONTROL)
 753                brcms_dbg_info(core, "FIF_CONTROL\n");
 754        if (changed_flags & FIF_OTHER_BSS)
 755                brcms_dbg_info(core, "FIF_OTHER_BSS\n");
 756        if (changed_flags & FIF_PSPOLL)
 757                brcms_dbg_info(core, "FIF_PSPOLL\n");
 758        if (changed_flags & FIF_BCN_PRBRESP_PROMISC)
 759                brcms_dbg_info(core, "FIF_BCN_PRBRESP_PROMISC\n");
 760
 761        spin_lock_bh(&wl->lock);
 762        brcms_c_mac_promisc(wl->wlc, *total_flags);
 763        spin_unlock_bh(&wl->lock);
 764        return;
 765}
 766
 767static void brcms_ops_sw_scan_start(struct ieee80211_hw *hw)
 768{
 769        struct brcms_info *wl = hw->priv;
 770        spin_lock_bh(&wl->lock);
 771        brcms_c_scan_start(wl->wlc);
 772        spin_unlock_bh(&wl->lock);
 773        return;
 774}
 775
 776static void brcms_ops_sw_scan_complete(struct ieee80211_hw *hw)
 777{
 778        struct brcms_info *wl = hw->priv;
 779        spin_lock_bh(&wl->lock);
 780        brcms_c_scan_stop(wl->wlc);
 781        spin_unlock_bh(&wl->lock);
 782        return;
 783}
 784
 785static int
 786brcms_ops_conf_tx(struct ieee80211_hw *hw, struct ieee80211_vif *vif, u16 queue,
 787                  const struct ieee80211_tx_queue_params *params)
 788{
 789        struct brcms_info *wl = hw->priv;
 790
 791        spin_lock_bh(&wl->lock);
 792        brcms_c_wme_setparams(wl->wlc, queue, params, true);
 793        spin_unlock_bh(&wl->lock);
 794
 795        return 0;
 796}
 797
 798static int
 799brcms_ops_sta_add(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 800               struct ieee80211_sta *sta)
 801{
 802        struct brcms_info *wl = hw->priv;
 803        struct scb *scb = &wl->wlc->pri_scb;
 804
 805        brcms_c_init_scb(scb);
 806
 807        wl->pub->global_ampdu = &(scb->scb_ampdu);
 808        wl->pub->global_ampdu->scb = scb;
 809        wl->pub->global_ampdu->max_pdu = 16;
 810
 811        /*
 812         * minstrel_ht initiates addBA on our behalf by calling
 813         * ieee80211_start_tx_ba_session()
 814         */
 815        return 0;
 816}
 817
 818static int
 819brcms_ops_ampdu_action(struct ieee80211_hw *hw,
 820                    struct ieee80211_vif *vif,
 821                    enum ieee80211_ampdu_mlme_action action,
 822                    struct ieee80211_sta *sta, u16 tid, u16 *ssn,
 823                    u8 buf_size)
 824{
 825        struct brcms_info *wl = hw->priv;
 826        struct scb *scb = &wl->wlc->pri_scb;
 827        int status;
 828
 829        if (WARN_ON(scb->magic != SCB_MAGIC))
 830                return -EIDRM;
 831        switch (action) {
 832        case IEEE80211_AMPDU_RX_START:
 833                break;
 834        case IEEE80211_AMPDU_RX_STOP:
 835                break;
 836        case IEEE80211_AMPDU_TX_START:
 837                spin_lock_bh(&wl->lock);
 838                status = brcms_c_aggregatable(wl->wlc, tid);
 839                spin_unlock_bh(&wl->lock);
 840                if (!status) {
 841                        brcms_err(wl->wlc->hw->d11core,
 842                                  "START: tid %d is not agg\'able\n", tid);
 843                        return -EINVAL;
 844                }
 845                ieee80211_start_tx_ba_cb_irqsafe(vif, sta->addr, tid);
 846                break;
 847
 848        case IEEE80211_AMPDU_TX_STOP_CONT:
 849        case IEEE80211_AMPDU_TX_STOP_FLUSH:
 850        case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT:
 851                spin_lock_bh(&wl->lock);
 852                brcms_c_ampdu_flush(wl->wlc, sta, tid);
 853                spin_unlock_bh(&wl->lock);
 854                ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid);
 855                break;
 856        case IEEE80211_AMPDU_TX_OPERATIONAL:
 857                /*
 858                 * BA window size from ADDBA response ('buf_size') defines how
 859                 * many outstanding MPDUs are allowed for the BA stream by
 860                 * recipient and traffic class. 'ampdu_factor' gives maximum
 861                 * AMPDU size.
 862                 */
 863                spin_lock_bh(&wl->lock);
 864                brcms_c_ampdu_tx_operational(wl->wlc, tid, buf_size,
 865                        (1 << (IEEE80211_HT_MAX_AMPDU_FACTOR +
 866                         sta->ht_cap.ampdu_factor)) - 1);
 867                spin_unlock_bh(&wl->lock);
 868                /* Power save wakeup */
 869                break;
 870        default:
 871                brcms_err(wl->wlc->hw->d11core,
 872                          "%s: Invalid command, ignoring\n", __func__);
 873        }
 874
 875        return 0;
 876}
 877
 878static void brcms_ops_rfkill_poll(struct ieee80211_hw *hw)
 879{
 880        struct brcms_info *wl = hw->priv;
 881        bool blocked;
 882
 883        spin_lock_bh(&wl->lock);
 884        blocked = brcms_c_check_radio_disabled(wl->wlc);
 885        spin_unlock_bh(&wl->lock);
 886
 887        wiphy_rfkill_set_hw_state(wl->pub->ieee_hw->wiphy, blocked);
 888}
 889
 890static bool brcms_tx_flush_completed(struct brcms_info *wl)
 891{
 892        bool result;
 893
 894        spin_lock_bh(&wl->lock);
 895        result = brcms_c_tx_flush_completed(wl->wlc);
 896        spin_unlock_bh(&wl->lock);
 897        return result;
 898}
 899
 900static void brcms_ops_flush(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 901                            u32 queues, bool drop)
 902{
 903        struct brcms_info *wl = hw->priv;
 904        int ret;
 905
 906        no_printk("%s: drop = %s\n", __func__, drop ? "true" : "false");
 907
 908        ret = wait_event_timeout(wl->tx_flush_wq,
 909                                 brcms_tx_flush_completed(wl),
 910                                 msecs_to_jiffies(BRCMS_FLUSH_TIMEOUT));
 911
 912        brcms_dbg_mac80211(wl->wlc->hw->d11core,
 913                           "ret=%d\n", jiffies_to_msecs(ret));
 914}
 915
 916static u64 brcms_ops_get_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
 917{
 918        struct brcms_info *wl = hw->priv;
 919        u64 tsf;
 920
 921        spin_lock_bh(&wl->lock);
 922        tsf = brcms_c_tsf_get(wl->wlc);
 923        spin_unlock_bh(&wl->lock);
 924
 925        return tsf;
 926}
 927
 928static void brcms_ops_set_tsf(struct ieee80211_hw *hw,
 929                           struct ieee80211_vif *vif, u64 tsf)
 930{
 931        struct brcms_info *wl = hw->priv;
 932
 933        spin_lock_bh(&wl->lock);
 934        brcms_c_tsf_set(wl->wlc, tsf);
 935        spin_unlock_bh(&wl->lock);
 936}
 937
 938static const struct ieee80211_ops brcms_ops = {
 939        .tx = brcms_ops_tx,
 940        .start = brcms_ops_start,
 941        .stop = brcms_ops_stop,
 942        .add_interface = brcms_ops_add_interface,
 943        .remove_interface = brcms_ops_remove_interface,
 944        .config = brcms_ops_config,
 945        .bss_info_changed = brcms_ops_bss_info_changed,
 946        .configure_filter = brcms_ops_configure_filter,
 947        .sw_scan_start = brcms_ops_sw_scan_start,
 948        .sw_scan_complete = brcms_ops_sw_scan_complete,
 949        .conf_tx = brcms_ops_conf_tx,
 950        .sta_add = brcms_ops_sta_add,
 951        .ampdu_action = brcms_ops_ampdu_action,
 952        .rfkill_poll = brcms_ops_rfkill_poll,
 953        .flush = brcms_ops_flush,
 954        .get_tsf = brcms_ops_get_tsf,
 955        .set_tsf = brcms_ops_set_tsf,
 956};
 957
 958void brcms_dpc(unsigned long data)
 959{
 960        struct brcms_info *wl;
 961
 962        wl = (struct brcms_info *) data;
 963
 964        spin_lock_bh(&wl->lock);
 965
 966        /* call the common second level interrupt handler */
 967        if (wl->pub->up) {
 968                if (wl->resched) {
 969                        unsigned long flags;
 970
 971                        spin_lock_irqsave(&wl->isr_lock, flags);
 972                        brcms_c_intrsupd(wl->wlc);
 973                        spin_unlock_irqrestore(&wl->isr_lock, flags);
 974                }
 975
 976                wl->resched = brcms_c_dpc(wl->wlc, true);
 977        }
 978
 979        /* brcms_c_dpc() may bring the driver down */
 980        if (!wl->pub->up)
 981                goto done;
 982
 983        /* re-schedule dpc */
 984        if (wl->resched)
 985                tasklet_schedule(&wl->tasklet);
 986        else
 987                /* re-enable interrupts */
 988                brcms_intrson(wl);
 989
 990 done:
 991        spin_unlock_bh(&wl->lock);
 992        wake_up(&wl->tx_flush_wq);
 993}
 994
 995static irqreturn_t brcms_isr(int irq, void *dev_id)
 996{
 997        struct brcms_info *wl;
 998        irqreturn_t ret = IRQ_NONE;
 999
1000        wl = (struct brcms_info *) dev_id;
1001
1002        spin_lock(&wl->isr_lock);
1003
1004        /* call common first level interrupt handler */
1005        if (brcms_c_isr(wl->wlc)) {
1006                /* schedule second level handler */
1007                tasklet_schedule(&wl->tasklet);
1008                ret = IRQ_HANDLED;
1009        }
1010
1011        spin_unlock(&wl->isr_lock);
1012
1013        return ret;
1014}
1015
1016/*
1017 * is called in brcms_pci_probe() context, therefore no locking required.
1018 */
1019static int ieee_hw_rate_init(struct ieee80211_hw *hw)
1020{
1021        struct brcms_info *wl = hw->priv;
1022        struct brcms_c_info *wlc = wl->wlc;
1023        struct ieee80211_supported_band *band;
1024        int has_5g = 0;
1025        u16 phy_type;
1026
1027        hw->wiphy->bands[IEEE80211_BAND_2GHZ] = NULL;
1028        hw->wiphy->bands[IEEE80211_BAND_5GHZ] = NULL;
1029
1030        phy_type = brcms_c_get_phy_type(wl->wlc, 0);
1031        if (phy_type == PHY_TYPE_N || phy_type == PHY_TYPE_LCN) {
1032                band = &wlc->bandstate[BAND_2G_INDEX]->band;
1033                *band = brcms_band_2GHz_nphy_template;
1034                if (phy_type == PHY_TYPE_LCN) {
1035                        /* Single stream */
1036                        band->ht_cap.mcs.rx_mask[1] = 0;
1037                        band->ht_cap.mcs.rx_highest = cpu_to_le16(72);
1038                }
1039                hw->wiphy->bands[IEEE80211_BAND_2GHZ] = band;
1040        } else {
1041                return -EPERM;
1042        }
1043
1044        /* Assume all bands use the same phy.  True for 11n devices. */
1045        if (wl->pub->_nbands > 1) {
1046                has_5g++;
1047                if (phy_type == PHY_TYPE_N || phy_type == PHY_TYPE_LCN) {
1048                        band = &wlc->bandstate[BAND_5G_INDEX]->band;
1049                        *band = brcms_band_5GHz_nphy_template;
1050                        hw->wiphy->bands[IEEE80211_BAND_5GHZ] = band;
1051                } else {
1052                        return -EPERM;
1053                }
1054        }
1055        return 0;
1056}
1057
1058/*
1059 * is called in brcms_pci_probe() context, therefore no locking required.
1060 */
1061static int ieee_hw_init(struct ieee80211_hw *hw)
1062{
1063        hw->flags = IEEE80211_HW_SIGNAL_DBM
1064            /* | IEEE80211_HW_CONNECTION_MONITOR  What is this? */
1065            | IEEE80211_HW_REPORTS_TX_ACK_STATUS
1066            | IEEE80211_HW_AMPDU_AGGREGATION;
1067
1068        hw->extra_tx_headroom = brcms_c_get_header_len();
1069        hw->queues = N_TX_QUEUES;
1070        hw->max_rates = 2;      /* Primary rate and 1 fallback rate */
1071
1072        /* channel change time is dependent on chip and band  */
1073        hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
1074                                     BIT(NL80211_IFTYPE_AP) |
1075                                     BIT(NL80211_IFTYPE_ADHOC);
1076
1077        /*
1078         * deactivate sending probe responses by ucude, because this will
1079         * cause problems when WPS is used.
1080         *
1081         * hw->wiphy->flags |= WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD;
1082         */
1083
1084        hw->rate_control_algorithm = "minstrel_ht";
1085
1086        hw->sta_data_size = 0;
1087        return ieee_hw_rate_init(hw);
1088}
1089
1090/**
1091 * attach to the WL device.
1092 *
1093 * Attach to the WL device identified by vendor and device parameters.
1094 * regs is a host accessible memory address pointing to WL device registers.
1095 *
1096 * is called in brcms_bcma_probe() context, therefore no locking required.
1097 */
1098static struct brcms_info *brcms_attach(struct bcma_device *pdev)
1099{
1100        struct brcms_info *wl = NULL;
1101        int unit, err;
1102        struct ieee80211_hw *hw;
1103        u8 perm[ETH_ALEN];
1104
1105        unit = n_adapters_found;
1106        err = 0;
1107
1108        if (unit < 0)
1109                return NULL;
1110
1111        /* allocate private info */
1112        hw = bcma_get_drvdata(pdev);
1113        if (hw != NULL)
1114                wl = hw->priv;
1115        if (WARN_ON(hw == NULL) || WARN_ON(wl == NULL))
1116                return NULL;
1117        wl->wiphy = hw->wiphy;
1118
1119        atomic_set(&wl->callbacks, 0);
1120
1121        init_waitqueue_head(&wl->tx_flush_wq);
1122
1123        /* setup the bottom half handler */
1124        tasklet_init(&wl->tasklet, brcms_dpc, (unsigned long) wl);
1125
1126        spin_lock_init(&wl->lock);
1127        spin_lock_init(&wl->isr_lock);
1128
1129        /* common load-time initialization */
1130        wl->wlc = brcms_c_attach((void *)wl, pdev, unit, false, &err);
1131        if (!wl->wlc) {
1132                wiphy_err(wl->wiphy, "%s: attach() failed with code %d\n",
1133                          KBUILD_MODNAME, err);
1134                goto fail;
1135        }
1136        wl->pub = brcms_c_pub(wl->wlc);
1137
1138        wl->pub->ieee_hw = hw;
1139
1140        /* register our interrupt handler */
1141        if (request_irq(pdev->irq, brcms_isr,
1142                        IRQF_SHARED, KBUILD_MODNAME, wl)) {
1143                wiphy_err(wl->wiphy, "wl%d: request_irq() failed\n", unit);
1144                goto fail;
1145        }
1146        wl->irq = pdev->irq;
1147
1148        /* register module */
1149        brcms_c_module_register(wl->pub, "linux", wl, NULL);
1150
1151        if (ieee_hw_init(hw)) {
1152                wiphy_err(wl->wiphy, "wl%d: %s: ieee_hw_init failed!\n", unit,
1153                          __func__);
1154                goto fail;
1155        }
1156
1157        brcms_c_regd_init(wl->wlc);
1158
1159        memcpy(perm, &wl->pub->cur_etheraddr, ETH_ALEN);
1160        if (WARN_ON(!is_valid_ether_addr(perm)))
1161                goto fail;
1162        SET_IEEE80211_PERM_ADDR(hw, perm);
1163
1164        err = ieee80211_register_hw(hw);
1165        if (err)
1166                wiphy_err(wl->wiphy, "%s: ieee80211_register_hw failed, status"
1167                          "%d\n", __func__, err);
1168
1169        if (wl->pub->srom_ccode[0] &&
1170            regulatory_hint(wl->wiphy, wl->pub->srom_ccode))
1171                wiphy_err(wl->wiphy, "%s: regulatory hint failed\n", __func__);
1172
1173        brcms_debugfs_attach(wl->pub);
1174        brcms_debugfs_create_files(wl->pub);
1175        n_adapters_found++;
1176        return wl;
1177
1178fail:
1179        brcms_free(wl);
1180        return NULL;
1181}
1182
1183
1184
1185/**
1186 * determines if a device is a WL device, and if so, attaches it.
1187 *
1188 * This function determines if a device pointed to by pdev is a WL device,
1189 * and if so, performs a brcms_attach() on it.
1190 *
1191 * Perimeter lock is initialized in the course of this function.
1192 */
1193static int brcms_bcma_probe(struct bcma_device *pdev)
1194{
1195        struct brcms_info *wl;
1196        struct ieee80211_hw *hw;
1197
1198        dev_info(&pdev->dev, "mfg %x core %x rev %d class %d irq %d\n",
1199                 pdev->id.manuf, pdev->id.id, pdev->id.rev, pdev->id.class,
1200                 pdev->irq);
1201
1202        if ((pdev->id.manuf != BCMA_MANUF_BCM) ||
1203            (pdev->id.id != BCMA_CORE_80211))
1204                return -ENODEV;
1205
1206        hw = ieee80211_alloc_hw(sizeof(struct brcms_info), &brcms_ops);
1207        if (!hw) {
1208                pr_err("%s: ieee80211_alloc_hw failed\n", __func__);
1209                return -ENOMEM;
1210        }
1211
1212        SET_IEEE80211_DEV(hw, &pdev->dev);
1213
1214        bcma_set_drvdata(pdev, hw);
1215
1216        memset(hw->priv, 0, sizeof(*wl));
1217
1218        wl = brcms_attach(pdev);
1219        if (!wl) {
1220                pr_err("%s: brcms_attach failed!\n", __func__);
1221                return -ENODEV;
1222        }
1223        brcms_led_register(wl);
1224
1225        return 0;
1226}
1227
1228static int brcms_suspend(struct bcma_device *pdev)
1229{
1230        struct brcms_info *wl;
1231        struct ieee80211_hw *hw;
1232
1233        hw = bcma_get_drvdata(pdev);
1234        wl = hw->priv;
1235        if (!wl) {
1236                pr_err("%s: %s: no driver private struct!\n", KBUILD_MODNAME,
1237                       __func__);
1238                return -ENODEV;
1239        }
1240
1241        /* only need to flag hw is down for proper resume */
1242        spin_lock_bh(&wl->lock);
1243        wl->pub->hw_up = false;
1244        spin_unlock_bh(&wl->lock);
1245
1246        brcms_dbg_info(wl->wlc->hw->d11core, "brcms_suspend ok\n");
1247
1248        return 0;
1249}
1250
1251static int brcms_resume(struct bcma_device *pdev)
1252{
1253        return 0;
1254}
1255
1256static struct bcma_driver brcms_bcma_driver = {
1257        .name     = KBUILD_MODNAME,
1258        .probe    = brcms_bcma_probe,
1259        .suspend  = brcms_suspend,
1260        .resume   = brcms_resume,
1261        .remove   = brcms_remove,
1262        .id_table = brcms_coreid_table,
1263};
1264
1265/**
1266 * This is the main entry point for the brcmsmac driver.
1267 *
1268 * This function is scheduled upon module initialization and
1269 * does the driver registration, which result in brcms_bcma_probe()
1270 * call resulting in the driver bringup.
1271 */
1272static void brcms_driver_init(struct work_struct *work)
1273{
1274        int error;
1275
1276        error = bcma_driver_register(&brcms_bcma_driver);
1277        if (error)
1278                pr_err("%s: register returned %d\n", __func__, error);
1279}
1280
1281static DECLARE_WORK(brcms_driver_work, brcms_driver_init);
1282
1283static int __init brcms_module_init(void)
1284{
1285        brcms_debugfs_init();
1286        if (!schedule_work(&brcms_driver_work))
1287                return -EBUSY;
1288
1289        return 0;
1290}
1291
1292/**
1293 * This function unloads the brcmsmac driver from the system.
1294 *
1295 * This function unconditionally unloads the brcmsmac driver module from the
1296 * system.
1297 *
1298 */
1299static void __exit brcms_module_exit(void)
1300{
1301        cancel_work_sync(&brcms_driver_work);
1302        bcma_driver_unregister(&brcms_bcma_driver);
1303        brcms_debugfs_exit();
1304}
1305
1306module_init(brcms_module_init);
1307module_exit(brcms_module_exit);
1308
1309/*
1310 * precondition: perimeter lock has been acquired
1311 */
1312void brcms_txflowcontrol(struct brcms_info *wl, struct brcms_if *wlif,
1313                         bool state, int prio)
1314{
1315        brcms_err(wl->wlc->hw->d11core, "Shouldn't be here %s\n", __func__);
1316}
1317
1318/*
1319 * precondition: perimeter lock has been acquired
1320 */
1321void brcms_init(struct brcms_info *wl)
1322{
1323        brcms_dbg_info(wl->wlc->hw->d11core, "Initializing wl%d\n",
1324                       wl->pub->unit);
1325        brcms_reset(wl);
1326        brcms_c_init(wl->wlc, wl->mute_tx);
1327}
1328
1329/*
1330 * precondition: perimeter lock has been acquired
1331 */
1332uint brcms_reset(struct brcms_info *wl)
1333{
1334        brcms_dbg_info(wl->wlc->hw->d11core, "Resetting wl%d\n", wl->pub->unit);
1335        brcms_c_reset(wl->wlc);
1336
1337        /* dpc will not be rescheduled */
1338        wl->resched = false;
1339
1340        /* inform publicly that interface is down */
1341        wl->pub->up = false;
1342
1343        return 0;
1344}
1345
1346void brcms_fatal_error(struct brcms_info *wl)
1347{
1348        brcms_err(wl->wlc->hw->d11core, "wl%d: fatal error, reinitializing\n",
1349                  wl->wlc->pub->unit);
1350        brcms_reset(wl);
1351        ieee80211_restart_hw(wl->pub->ieee_hw);
1352}
1353
1354/*
1355 * These are interrupt on/off entry points. Disable interrupts
1356 * during interrupt state transition.
1357 */
1358void brcms_intrson(struct brcms_info *wl)
1359{
1360        unsigned long flags;
1361
1362        spin_lock_irqsave(&wl->isr_lock, flags);
1363        brcms_c_intrson(wl->wlc);
1364        spin_unlock_irqrestore(&wl->isr_lock, flags);
1365}
1366
1367u32 brcms_intrsoff(struct brcms_info *wl)
1368{
1369        unsigned long flags;
1370        u32 status;
1371
1372        spin_lock_irqsave(&wl->isr_lock, flags);
1373        status = brcms_c_intrsoff(wl->wlc);
1374        spin_unlock_irqrestore(&wl->isr_lock, flags);
1375        return status;
1376}
1377
1378void brcms_intrsrestore(struct brcms_info *wl, u32 macintmask)
1379{
1380        unsigned long flags;
1381
1382        spin_lock_irqsave(&wl->isr_lock, flags);
1383        brcms_c_intrsrestore(wl->wlc, macintmask);
1384        spin_unlock_irqrestore(&wl->isr_lock, flags);
1385}
1386
1387/*
1388 * precondition: perimeter lock has been acquired
1389 */
1390int brcms_up(struct brcms_info *wl)
1391{
1392        int error = 0;
1393
1394        if (wl->pub->up)
1395                return 0;
1396
1397        error = brcms_c_up(wl->wlc);
1398
1399        return error;
1400}
1401
1402/*
1403 * precondition: perimeter lock has been acquired
1404 */
1405void brcms_down(struct brcms_info *wl)
1406{
1407        uint callbacks, ret_val = 0;
1408
1409        /* call common down function */
1410        ret_val = brcms_c_down(wl->wlc);
1411        callbacks = atomic_read(&wl->callbacks) - ret_val;
1412
1413        /* wait for down callbacks to complete */
1414        spin_unlock_bh(&wl->lock);
1415
1416        /* For HIGH_only driver, it's important to actually schedule other work,
1417         * not just spin wait since everything runs at schedule level
1418         */
1419        SPINWAIT((atomic_read(&wl->callbacks) > callbacks), 100 * 1000);
1420
1421        spin_lock_bh(&wl->lock);
1422}
1423
1424/*
1425* precondition: perimeter lock is not acquired
1426 */
1427static void _brcms_timer(struct work_struct *work)
1428{
1429        struct brcms_timer *t = container_of(work, struct brcms_timer,
1430                                             dly_wrk.work);
1431
1432        spin_lock_bh(&t->wl->lock);
1433
1434        if (t->set) {
1435                if (t->periodic) {
1436                        atomic_inc(&t->wl->callbacks);
1437                        ieee80211_queue_delayed_work(t->wl->pub->ieee_hw,
1438                                                     &t->dly_wrk,
1439                                                     msecs_to_jiffies(t->ms));
1440                } else {
1441                        t->set = false;
1442                }
1443
1444                t->fn(t->arg);
1445        }
1446
1447        atomic_dec(&t->wl->callbacks);
1448
1449        spin_unlock_bh(&t->wl->lock);
1450}
1451
1452/*
1453 * Adds a timer to the list. Caller supplies a timer function.
1454 * Is called from wlc.
1455 *
1456 * precondition: perimeter lock has been acquired
1457 */
1458struct brcms_timer *brcms_init_timer(struct brcms_info *wl,
1459                                     void (*fn) (void *arg),
1460                                     void *arg, const char *name)
1461{
1462        struct brcms_timer *t;
1463
1464        t = kzalloc(sizeof(struct brcms_timer), GFP_ATOMIC);
1465        if (!t)
1466                return NULL;
1467
1468        INIT_DELAYED_WORK(&t->dly_wrk, _brcms_timer);
1469        t->wl = wl;
1470        t->fn = fn;
1471        t->arg = arg;
1472        t->next = wl->timers;
1473        wl->timers = t;
1474
1475#ifdef DEBUG
1476        t->name = kmalloc(strlen(name) + 1, GFP_ATOMIC);
1477        if (t->name)
1478                strcpy(t->name, name);
1479#endif
1480
1481        return t;
1482}
1483
1484/*
1485 * adds only the kernel timer since it's going to be more accurate
1486 * as well as it's easier to make it periodic
1487 *
1488 * precondition: perimeter lock has been acquired
1489 */
1490void brcms_add_timer(struct brcms_timer *t, uint ms, int periodic)
1491{
1492        struct ieee80211_hw *hw = t->wl->pub->ieee_hw;
1493
1494#ifdef DEBUG
1495        if (t->set)
1496                brcms_dbg_info(t->wl->wlc->hw->d11core,
1497                               "%s: Already set. Name: %s, per %d\n",
1498                               __func__, t->name, periodic);
1499#endif
1500        t->ms = ms;
1501        t->periodic = (bool) periodic;
1502        if (!t->set) {
1503                t->set = true;
1504                atomic_inc(&t->wl->callbacks);
1505        }
1506
1507        ieee80211_queue_delayed_work(hw, &t->dly_wrk, msecs_to_jiffies(ms));
1508}
1509
1510/*
1511 * return true if timer successfully deleted, false if still pending
1512 *
1513 * precondition: perimeter lock has been acquired
1514 */
1515bool brcms_del_timer(struct brcms_timer *t)
1516{
1517        if (t->set) {
1518                t->set = false;
1519                if (!cancel_delayed_work(&t->dly_wrk))
1520                        return false;
1521
1522                atomic_dec(&t->wl->callbacks);
1523        }
1524
1525        return true;
1526}
1527
1528/*
1529 * precondition: perimeter lock has been acquired
1530 */
1531void brcms_free_timer(struct brcms_timer *t)
1532{
1533        struct brcms_info *wl = t->wl;
1534        struct brcms_timer *tmp;
1535
1536        /* delete the timer in case it is active */
1537        brcms_del_timer(t);
1538
1539        if (wl->timers == t) {
1540                wl->timers = wl->timers->next;
1541#ifdef DEBUG
1542                kfree(t->name);
1543#endif
1544                kfree(t);
1545                return;
1546
1547        }
1548
1549        tmp = wl->timers;
1550        while (tmp) {
1551                if (tmp->next == t) {
1552                        tmp->next = t->next;
1553#ifdef DEBUG
1554                        kfree(t->name);
1555#endif
1556                        kfree(t);
1557                        return;
1558                }
1559                tmp = tmp->next;
1560        }
1561
1562}
1563
1564/*
1565 * precondition: perimeter lock has been acquired
1566 */
1567int brcms_ucode_init_buf(struct brcms_info *wl, void **pbuf, u32 idx)
1568{
1569        int i, entry;
1570        const u8 *pdata;
1571        struct firmware_hdr *hdr;
1572        for (i = 0; i < wl->fw.fw_cnt; i++) {
1573                hdr = (struct firmware_hdr *)wl->fw.fw_hdr[i]->data;
1574                for (entry = 0; entry < wl->fw.hdr_num_entries[i];
1575                     entry++, hdr++) {
1576                        u32 len = le32_to_cpu(hdr->len);
1577                        if (le32_to_cpu(hdr->idx) == idx) {
1578                                pdata = wl->fw.fw_bin[i]->data +
1579                                        le32_to_cpu(hdr->offset);
1580                                *pbuf = kmemdup(pdata, len, GFP_ATOMIC);
1581                                if (*pbuf == NULL)
1582                                        goto fail;
1583
1584                                return 0;
1585                        }
1586                }
1587        }
1588        brcms_err(wl->wlc->hw->d11core,
1589                  "ERROR: ucode buf tag:%d can not be found!\n", idx);
1590        *pbuf = NULL;
1591fail:
1592        return -ENODATA;
1593}
1594
1595/*
1596 * Precondition: Since this function is called in brcms_bcma_probe() context,
1597 * no locking is required.
1598 */
1599int brcms_ucode_init_uint(struct brcms_info *wl, size_t *n_bytes, u32 idx)
1600{
1601        int i, entry;
1602        const u8 *pdata;
1603        struct firmware_hdr *hdr;
1604        for (i = 0; i < wl->fw.fw_cnt; i++) {
1605                hdr = (struct firmware_hdr *)wl->fw.fw_hdr[i]->data;
1606                for (entry = 0; entry < wl->fw.hdr_num_entries[i];
1607                     entry++, hdr++) {
1608                        if (le32_to_cpu(hdr->idx) == idx) {
1609                                pdata = wl->fw.fw_bin[i]->data +
1610                                        le32_to_cpu(hdr->offset);
1611                                if (le32_to_cpu(hdr->len) != 4) {
1612                                        brcms_err(wl->wlc->hw->d11core,
1613                                                  "ERROR: fw hdr len\n");
1614                                        return -ENOMSG;
1615                                }
1616                                *n_bytes = le32_to_cpu(*((__le32 *) pdata));
1617                                return 0;
1618                        }
1619                }
1620        }
1621        brcms_err(wl->wlc->hw->d11core,
1622                  "ERROR: ucode tag:%d can not be found!\n", idx);
1623        return -ENOMSG;
1624}
1625
1626/*
1627 * precondition: can both be called locked and unlocked
1628 */
1629void brcms_ucode_free_buf(void *p)
1630{
1631        kfree(p);
1632}
1633
1634/*
1635 * checks validity of all firmware images loaded from user space
1636 *
1637 * Precondition: Since this function is called in brcms_bcma_probe() context,
1638 * no locking is required.
1639 */
1640int brcms_check_firmwares(struct brcms_info *wl)
1641{
1642        int i;
1643        int entry;
1644        int rc = 0;
1645        const struct firmware *fw;
1646        const struct firmware *fw_hdr;
1647        struct firmware_hdr *ucode_hdr;
1648        for (i = 0; i < MAX_FW_IMAGES && rc == 0; i++) {
1649                fw =  wl->fw.fw_bin[i];
1650                fw_hdr = wl->fw.fw_hdr[i];
1651                if (fw == NULL && fw_hdr == NULL) {
1652                        break;
1653                } else if (fw == NULL || fw_hdr == NULL) {
1654                        wiphy_err(wl->wiphy, "%s: invalid bin/hdr fw\n",
1655                                  __func__);
1656                        rc = -EBADF;
1657                } else if (fw_hdr->size % sizeof(struct firmware_hdr)) {
1658                        wiphy_err(wl->wiphy, "%s: non integral fw hdr file "
1659                                "size %zu/%zu\n", __func__, fw_hdr->size,
1660                                sizeof(struct firmware_hdr));
1661                        rc = -EBADF;
1662                } else if (fw->size < MIN_FW_SIZE || fw->size > MAX_FW_SIZE) {
1663                        wiphy_err(wl->wiphy, "%s: out of bounds fw file size %zu\n",
1664                                  __func__, fw->size);
1665                        rc = -EBADF;
1666                } else {
1667                        /* check if ucode section overruns firmware image */
1668                        ucode_hdr = (struct firmware_hdr *)fw_hdr->data;
1669                        for (entry = 0; entry < wl->fw.hdr_num_entries[i] &&
1670                             !rc; entry++, ucode_hdr++) {
1671                                if (le32_to_cpu(ucode_hdr->offset) +
1672                                    le32_to_cpu(ucode_hdr->len) >
1673                                    fw->size) {
1674                                        wiphy_err(wl->wiphy,
1675                                                  "%s: conflicting bin/hdr\n",
1676                                                  __func__);
1677                                        rc = -EBADF;
1678                                }
1679                        }
1680                }
1681        }
1682        if (rc == 0 && wl->fw.fw_cnt != i) {
1683                wiphy_err(wl->wiphy, "%s: invalid fw_cnt=%d\n", __func__,
1684                        wl->fw.fw_cnt);
1685                rc = -EBADF;
1686        }
1687        return rc;
1688}
1689
1690/*
1691 * precondition: perimeter lock has been acquired
1692 */
1693bool brcms_rfkill_set_hw_state(struct brcms_info *wl)
1694{
1695        bool blocked = brcms_c_check_radio_disabled(wl->wlc);
1696
1697        spin_unlock_bh(&wl->lock);
1698        wiphy_rfkill_set_hw_state(wl->pub->ieee_hw->wiphy, blocked);
1699        if (blocked)
1700                wiphy_rfkill_start_polling(wl->pub->ieee_hw->wiphy);
1701        spin_lock_bh(&wl->lock);
1702        return blocked;
1703}
1704