1/* 2 * arch/arm/mach-pxa/include/mach/gumstix.h 3 * 4 * This program is free software; you can redistribute it and/or modify 5 * it under the terms of the GNU General Public License version 2 as 6 * published by the Free Software Foundation. 7 */ 8 9#include "irqs.h" /* PXA_GPIO_TO_IRQ */ 10 11/* BTRESET - Reset line to Bluetooth module, active low signal. */ 12#define GPIO_GUMSTIX_BTRESET 7 13#define GPIO_GUMSTIX_BTRESET_MD (GPIO_GUMSTIX_BTRESET | GPIO_OUT) 14 15 16/* 17GPIOn - Input from MAX823 (or equiv), normalizing USB +5V into a clean 18interrupt signal for determining cable presence. On the gumstix F, 19this moves to GPIO17 and GPIO37. */ 20 21/* GPIOx - Connects to USB D+ and used as a pull-up after GPIOn 22has detected a cable insertion; driven low otherwise. */ 23 24#define GPIO_GUMSTIX_USB_GPIOn 35 25#define GPIO_GUMSTIX_USB_GPIOx 41 26 27/* usb state change */ 28#define GUMSTIX_USB_INTR_IRQ PXA_GPIO_TO_IRQ(GPIO_GUMSTIX_USB_GPIOn) 29 30#define GPIO_GUMSTIX_USB_GPIOn_MD (GPIO_GUMSTIX_USB_GPIOn | GPIO_IN) 31#define GPIO_GUMSTIX_USB_GPIOx_CON_MD (GPIO_GUMSTIX_USB_GPIOx | GPIO_OUT) 32#define GPIO_GUMSTIX_USB_GPIOx_DIS_MD (GPIO_GUMSTIX_USB_GPIOx | GPIO_IN) 33 34/* 35 * SD/MMC definitions 36 */ 37#define GUMSTIX_GPIO_nSD_WP 22 /* SD Write Protect */ 38#define GUMSTIX_GPIO_nSD_DETECT 11 /* MMC/SD Card Detect */ 39#define GUMSTIX_IRQ_GPIO_nSD_DETECT PXA_GPIO_TO_IRQ(GUMSTIX_GPIO_nSD_DETECT) 40 41/* 42 * SMC Ethernet definitions 43 * ETH_RST provides a hardware reset line to the ethernet chip 44 * ETH is the IRQ line in from the ethernet chip to the PXA 45 */ 46#define GPIO_GUMSTIX_ETH0_RST 80 47#define GPIO_GUMSTIX_ETH0_RST_MD (GPIO_GUMSTIX_ETH0_RST | GPIO_OUT) 48#define GPIO_GUMSTIX_ETH1_RST 52 49#define GPIO_GUMSTIX_ETH1_RST_MD (GPIO_GUMSTIX_ETH1_RST | GPIO_OUT) 50 51#define GPIO_GUMSTIX_ETH0 36 52#define GPIO_GUMSTIX_ETH0_MD (GPIO_GUMSTIX_ETH0 | GPIO_IN) 53#define GUMSTIX_ETH0_IRQ PXA_GPIO_TO_IRQ(GPIO_GUMSTIX_ETH0) 54#define GPIO_GUMSTIX_ETH1 27 55#define GPIO_GUMSTIX_ETH1_MD (GPIO_GUMSTIX_ETH1 | GPIO_IN) 56#define GUMSTIX_ETH1_IRQ PXA_GPIO_TO_IRQ(GPIO_GUMSTIX_ETH1) 57 58 59/* CF reset line */ 60#define GPIO8_RESET 8 61 62/* CF slot 0 */ 63#define GPIO4_nBVD1 4 64#define GPIO4_nSTSCHG GPIO4_nBVD1 65#define GPIO11_nCD 11 66#define GPIO26_PRDY_nBSY 26 67#define GUMSTIX_S0_nSTSCHG_IRQ PXA_GPIO_TO_IRQ(GPIO4_nSTSCHG) 68#define GUMSTIX_S0_nCD_IRQ PXA_GPIO_TO_IRQ(GPIO11_nCD) 69#define GUMSTIX_S0_PRDY_nBSY_IRQ PXA_GPIO_TO_IRQ(GPIO26_PRDY_nBSY) 70 71/* CF slot 1 */ 72#define GPIO18_nBVD1 18 73#define GPIO18_nSTSCHG GPIO18_nBVD1 74#define GPIO36_nCD 36 75#define GPIO27_PRDY_nBSY 27 76#define GUMSTIX_S1_nSTSCHG_IRQ PXA_GPIO_TO_IRQ(GPIO18_nSTSCHG) 77#define GUMSTIX_S1_nCD_IRQ PXA_GPIO_TO_IRQ(GPIO36_nCD) 78#define GUMSTIX_S1_PRDY_nBSY_IRQ PXA_GPIO_TO_IRQ(GPIO27_PRDY_nBSY) 79 80/* CF GPIO line modes */ 81#define GPIO4_nSTSCHG_MD (GPIO4_nSTSCHG | GPIO_IN) 82#define GPIO8_RESET_MD (GPIO8_RESET | GPIO_OUT) 83#define GPIO11_nCD_MD (GPIO11_nCD | GPIO_IN) 84#define GPIO18_nSTSCHG_MD (GPIO18_nSTSCHG | GPIO_IN) 85#define GPIO26_PRDY_nBSY_MD (GPIO26_PRDY_nBSY | GPIO_IN) 86#define GPIO27_PRDY_nBSY_MD (GPIO27_PRDY_nBSY | GPIO_IN) 87#define GPIO36_nCD_MD (GPIO36_nCD | GPIO_IN) 88 89/* for expansion boards that can't be programatically detected */ 90extern int am200_init(void); 91extern int am300_init(void); 92 93