LXR linux/drivers/watchdog/ux500

   1/*
   2 * Copyright (C) ST-Ericsson SA 2011-2013
   3 *
   4 * License Terms: GNU General Public License v2
   5 *
   6 * Author: Mathieu Poirier <mathieu.poirier@linaro.org> for ST-Ericsson
   7 * Author: Jonas Aaberg <jonas.aberg@stericsson.com> for ST-Ericsson
   8 */
   9
  10#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  11
  12#include <linux/module.h>
  13#include <linux/kernel.h>
  14#include <linux/moduleparam.h>
  15#include <linux/err.h>
  16#include <linux/uaccess.h>
  17#include <linux/watchdog.h>
  18#include <linux/platform_device.h>
  19#include <linux/platform_data/ux500_wdt.h>
  20
  21#include <linux/mfd/dbx500-prcmu.h>
  22
  23#define WATCHDOG_TIMEOUT 600 /* 10 minutes */
  24
  25#define WATCHDOG_MIN    0
  26#define WATCHDOG_MAX28  268435  /* 28 bit resolution in ms == 268435.455 s */
  27#define WATCHDOG_MAX32  4294967 /* 32 bit resolution in ms == 4294967.295 s */
  28
  29static unsigned int timeout = WATCHDOG_TIMEOUT;
  30module_param(timeout, uint, 0);
  31MODULE_PARM_DESC(timeout,
  32        "Watchdog timeout in seconds. default="
  33                                __MODULE_STRING(WATCHDOG_TIMEOUT) ".");
  34
  35static bool nowayout = WATCHDOG_NOWAYOUT;
  36module_param(nowayout, bool, 0);
  37MODULE_PARM_DESC(nowayout,
  38        "Watchdog cannot be stopped once started (default="
  39                                __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
  40
  41static int ux500_wdt_start(struct watchdog_device *wdd)
  42{
  43        return prcmu_enable_a9wdog(PRCMU_WDOG_ALL);
  44}
  45
  46static int ux500_wdt_stop(struct watchdog_device *wdd)
  47{
  48        return prcmu_disable_a9wdog(PRCMU_WDOG_ALL);
  49}
  50
  51static int ux500_wdt_keepalive(struct watchdog_device *wdd)
  52{
  53        return prcmu_kick_a9wdog(PRCMU_WDOG_ALL);
  54}
  55
  56static int ux500_wdt_set_timeout(struct watchdog_device *wdd,
  57                                 unsigned int timeout)
  58{
  59        ux500_wdt_stop(wdd);
  60        prcmu_load_a9wdog(PRCMU_WDOG_ALL, timeout * 1000);
  61        ux500_wdt_start(wdd);
  62
  63        return 0;
  64}
  65
  66static const struct watchdog_info ux500_wdt_info = {
  67        .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
  68        .identity = "Ux500 WDT",
  69        .firmware_version = 1,
  70};
  71
  72static const struct watchdog_ops ux500_wdt_ops = {
  73        .owner = THIS_MODULE,
  74        .start = ux500_wdt_start,
  75        .stop  = ux500_wdt_stop,
  76        .ping  = ux500_wdt_keepalive,
  77        .set_timeout = ux500_wdt_set_timeout,
  78};
  79
  80static struct watchdog_device ux500_wdt = {
  81        .info = &ux500_wdt_info,
  82        .ops = &ux500_wdt_ops,
  83        .min_timeout = WATCHDOG_MIN,
  84        .max_timeout = WATCHDOG_MAX32,
  85};
  86
  87static int ux500_wdt_probe(struct platform_device *pdev)
  88{
  89        int ret;
  90        struct ux500_wdt_data *pdata = dev_get_platdata(&pdev->dev);
  91
  92        if (pdata) {
  93                if (pdata->timeout > 0)
  94                        timeout = pdata->timeout;
  95                if (pdata->has_28_bits_resolution)
  96                        ux500_wdt.max_timeout = WATCHDOG_MAX28;
  97        }
  98
  99        watchdog_set_nowayout(&ux500_wdt, nowayout);
 100
 101        /* disable auto off on sleep */
 102        prcmu_config_a9wdog(PRCMU_WDOG_CPU1, false);
 103
 104        /* set HW initial value */
 105        prcmu_load_a9wdog(PRCMU_WDOG_ALL, timeout * 1000);
 106
 107        ret = watchdog_register_device(&ux500_wdt);
 108        if (ret)
 109                return ret;
 110
 111        dev_info(&pdev->dev, "initialized\n");
 112
 113        return 0;
 114}
 115
 116static int ux500_wdt_remove(struct platform_device *dev)
 117{
 118        watchdog_unregister_device(&ux500_wdt);
 119
 120        return 0;
 121}
 122
 123#ifdef CONFIG_PM
 124static int ux500_wdt_suspend(struct platform_device *pdev,
 125                             pm_message_t state)
 126{
 127        if (watchdog_active(&ux500_wdt)) {
 128                ux500_wdt_stop(&ux500_wdt);
 129                prcmu_config_a9wdog(PRCMU_WDOG_CPU1, true);
 130
 131                prcmu_load_a9wdog(PRCMU_WDOG_ALL, timeout * 1000);
 132                ux500_wdt_start(&ux500_wdt);
 133        }
 134        return 0;
 135}
 136
 137static int ux500_wdt_resume(struct platform_device *pdev)
 138{
 139        if (watchdog_active(&ux500_wdt)) {
 140                ux500_wdt_stop(&ux500_wdt);
 141                prcmu_config_a9wdog(PRCMU_WDOG_CPU1, false);
 142
 143                prcmu_load_a9wdog(PRCMU_WDOG_ALL, timeout * 1000);
 144                ux500_wdt_start(&ux500_wdt);
 145        }
 146        return 0;
 147}
 148#else
 149#define ux500_wdt_suspend NULL
 150#define ux500_wdt_resume NULL
 151#endif
 152
 153static struct platform_driver ux500_wdt_driver = {
 154        .probe          = ux500_wdt_probe,
 155        .remove         = ux500_wdt_remove,
 156        .suspend        = ux500_wdt_suspend,
 157        .resume         = ux500_wdt_resume,
 158        .driver         = {
 159                .owner  = THIS_MODULE,
 160                .name   = "ux500_wdt",
 161        },
 162};
 163
 164module_platform_driver(ux500_wdt_driver);
 165
 166MODULE_AUTHOR("Jonas Aaberg <jonas.aberg@stericsson.com>");
 167MODULE_DESCRIPTION("Ux500 Watchdog Driver");
 168MODULE_LICENSE("GPL");
 169MODULE_ALIAS("platform:ux500_wdt");
 170