/*
 * Copyright © 2006-2007 Intel Corporation
 *
 * Permission is hereby granted, free of charge, to any person obtaining a
 * copy of this software and associated documentation files (the "Software"),
 * to deal in the Software without restriction, including without limitation
 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
 * and/or sell copies of the Software, and to permit persons to whom the
 * Software is furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice (including the next
 * paragraph) shall be included in all copies or substantial portions of the
 * Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
 * DEALINGS IN THE SOFTWARE.
 *
 * Authors:
 *      Eric Anholt <eric@anholt.net>
 */

#include <linux/dmi.h>
#include <linux/module.h>
#include <linux/input.h>
#include <linux/i2c.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/vgaarb.h>
#include <drm/drm_edid.h>
#include <drm/drmP.h>
#include "intel_drv.h"
#include <drm/i915_drm.h>
#include "i915_drv.h"
#include "i915_trace.h"
#include <drm/drm_dp_helper.h>
#include <drm/drm_crtc_helper.h>
#include <drm/drm_plane_helper.h>
#include <drm/drm_rect.h>
#include <linux/dma_remapping.h>

/* Primary plane formats supported by all gen */
#define COMMON_PRIMARY_FORMATS \
        DRM_FORMAT_C8, \
        DRM_FORMAT_RGB565, \
        DRM_FORMAT_XRGB8888, \
        DRM_FORMAT_ARGB8888

/* Primary plane formats for gen <= 3 */
static const uint32_t intel_primary_formats_gen2[] = {
        COMMON_PRIMARY_FORMATS,
        DRM_FORMAT_XRGB1555,
        DRM_FORMAT_ARGB1555,
};

/* Primary plane formats for gen >= 4 */
static const uint32_t intel_primary_formats_gen4[] = {
        COMMON_PRIMARY_FORMATS, \
        DRM_FORMAT_XBGR8888,
        DRM_FORMAT_ABGR8888,
        DRM_FORMAT_XRGB2101010,
        DRM_FORMAT_ARGB2101010,
        DRM_FORMAT_XBGR2101010,
        DRM_FORMAT_ABGR2101010,
};

/* Cursor formats */
static const uint32_t intel_cursor_formats[] = {
        DRM_FORMAT_ARGB8888,
};

static void intel_crtc_update_cursor(struct drm_crtc *crtc, bool on);

static void i9xx_crtc_clock_get(struct intel_crtc *crtc,
                                struct intel_crtc_config *pipe_config);
static void ironlake_pch_clock_get(struct intel_crtc *crtc,
                                   struct intel_crtc_config *pipe_config);

static int intel_set_mode(struct drm_crtc *crtc, struct drm_display_mode *mode,
                          int x, int y, struct drm_framebuffer *old_fb);
static int intel_framebuffer_init(struct drm_device *dev,
                                  struct intel_framebuffer *ifb,
                                  struct drm_mode_fb_cmd2 *mode_cmd,
                                  struct drm_i915_gem_object *obj);
static void i9xx_set_pipeconf(struct intel_crtc *intel_crtc);
static void intel_set_pipe_timings(struct intel_crtc *intel_crtc);
static void intel_cpu_transcoder_set_m_n(struct intel_crtc *crtc,
                                         struct intel_link_m_n *m_n,
                                         struct intel_link_m_n *m2_n2);
static void ironlake_set_pipeconf(struct drm_crtc *crtc);
static void haswell_set_pipeconf(struct drm_crtc *crtc);
static void intel_set_pipe_csc(struct drm_crtc *crtc);
static void vlv_prepare_pll(struct intel_crtc *crtc,
                            const struct intel_crtc_config *pipe_config);
static void chv_prepare_pll(struct intel_crtc *crtc,
                            const struct intel_crtc_config *pipe_config);

static struct intel_encoder *intel_find_encoder(struct intel_connector *connector, int pipe)
{
        if (!connector->mst_port)
                return connector->encoder;
        else
                return &connector->mst_port->mst_encoders[pipe]->base;
}

typedef struct {
        int     min, max;
} intel_range_t;

typedef struct {
        int     dot_limit;
        int     p2_slow, p2_fast;
} intel_p2_t;

typedef struct intel_limit intel_limit_t;
struct intel_limit {
        intel_range_t   dot, vco, n, m, m1, m2, p, p1;
        intel_p2_t          p2;
};

int
intel_pch_rawclk(struct drm_device *dev)
{
        struct drm_i915_private *dev_priv = dev->dev_private;

        WARN_ON(!HAS_PCH_SPLIT(dev));

        return I915_READ(PCH_RAWCLK_FREQ) & RAWCLK_FREQ_MASK;
}

static inline u32 /* units of 100MHz */
intel_fdi_link_freq(struct drm_device *dev)
{
        if (IS_GEN5(dev)) {
                struct drm_i915_private *dev_priv = dev->dev_private;
                return (I915_READ(FDI_PLL_BIOS_0) & FDI_PLL_FB_CLOCK_MASK) + 2;
        } else
                return 27;
}

static const intel_limit_t intel_limits_i8xx_dac = {
        .dot = { .min = 25000, .max = 350000 },
        .vco = { .min = 908000, .max = 1512000 },
        .n = { .min = 2, .max = 16 },
        .m = { .min = 96, .max = 140 },
        .m1 = { .min = 18, .max = 26 },
        .m2 = { .min = 6, .max = 16 },
        .p = { .min = 4, .max = 128 },
        .p1 = { .min = 2, .max = 33 },
        .p2 = { .dot_limit = 165000,
                .p2_slow = 4, .p2_fast = 2 },
};

static const intel_limit_t intel_limits_i8xx_dvo = {
        .dot = { .min = 25000, .max = 350000 },
        .vco = { .min = 908000, .max = 1512000 },
        .n = { .min = 2, .max = 16 },
        .m = { .min = 96, .max = 140 },
        .m1 = { .min = 18, .max = 26 },
        .m2 = { .min = 6, .max = 16 },
        .p = { .min = 4, .max = 128 },
        .p1 = { .min = 2, .max = 33 },
        .p2 = { .dot_limit = 165000,
                .p2_slow = 4, .p2_fast = 4 },
};

static const intel_limit_t intel_limits_i8xx_lvds = {
        .dot = { .min = 25000, .max = 350000 },
        .vco = { .min = 908000, .max = 1512000 },
        .n = { .min = 2, .max = 16 },
        .m = { .min = 96, .max = 140 },
        .m1 = { .min = 18, .max = 26 },
        .m2 = { .min = 6, .max = 16 },
        .p = { .min = 4, .max = 128 },
        .p1 = { .min = 1, .max = 6 },
        .p2 = { .dot_limit = 165000,
                .p2_slow = 14, .p2_fast = 7 },
};

static const intel_limit_t intel_limits_i9xx_sdvo = {
        .dot = { .min = 20000, .max = 400000 },
        .vco = { .min = 1400000, .max = 2800000 },
        .n = { .min = 1, .max = 6 },
        .m = { .min = 70, .max = 120 },
        .m1 = { .min = 8, .max = 18 },
        .m2 = { .min = 3, .max = 7 },
        .p = { .min = 5, .max = 80 },
        .p1 = { .min = 1, .max = 8 },
        .p2 = { .dot_limit = 200000,
                .p2_slow = 10, .p2_fast = 5 },
};

static const intel_limit_t intel_limits_i9xx_lvds = {
        .dot = { .min = 20000, .max = 400000 },
        .vco = { .min = 1400000, .max = 2800000 },
        .n = { .min = 1, .max = 6 },
        .m = { .min = 70, .max = 120 },
        .m1 = { .min = 8, .max = 18 },
        .m2 = { .min = 3, .max = 7 },
        .p = { .min = 7, .max = 98 },
        .p1 = { .min = 1, .max = 8 },
        .p2 = { .dot_limit = 112000,
                .p2_slow = 14, .p2_fast = 7 },
};


static const intel_limit_t intel_limits_g4x_sdvo = {
        .dot = { .min = 25000, .max = 270000 },
        .vco = { .min = 1750000, .max = 3500000},
        .n = { .min = 1, .max = 4 },
        .m = { .min = 104, .max = 138 },
        .m1 = { .min = 17, .max = 23 },
        .m2 = { .min = 5, .max = 11 },
        .p = { .min = 10, .max = 30 },
        .p1 = { .min = 1, .max = 3},
        .p2 = { .dot_limit = 270000,
                .p2_slow = 10,
                .p2_fast = 10
        },
};

static const intel_limit_t intel_limits_g4x_hdmi = {
        .dot = { .min = 22000, .max = 400000 },
        .vco = { .min = 1750000, .max = 3500000},
        .n = { .min = 1, .max = 4 },
        .m = { .min = 104, .max = 138 },
        .m1 = { .min = 16, .max = 23 },
        .m2 = { .min = 5, .max = 11 },
        .p = { .min = 5, .max = 80 },
        .p1 = { .min = 1, .max = 8},
        .p2 = { .dot_limit = 165000,
                .p2_slow = 10, .p2_fast = 5 },
};

static const intel_limit_t intel_limits_g4x_single_channel_lvds = {
        .dot = { .min = 20000, .max = 115000 },
        .vco = { .min = 1750000, .max = 3500000 },
        .n = { .min = 1, .max = 3 },
        .m = { .min = 104, .max = 138 },
        .m1 = { .min = 17, .max = 23 },
        .m2 = { .min = 5, .max = 11 },
        .p = { .min = 28, .max = 112 },
        .p1 = { .min = 2, .max = 8 },
        .p2 = { .dot_limit = 0,
                .p2_slow = 14, .p2_fast = 14
        },
};

static const intel_limit_t intel_limits_g4x_dual_channel_lvds = {
        .dot = { .min = 80000, .max = 224000 },
        .vco = { .min = 1750000, .max = 3500000 },
        .n = { .min = 1, .max = 3 },
        .m = { .min = 104, .max = 138 },
        .m1 = { .min = 17, .max = 23 },
        .m2 = { .min = 5, .max = 11 },
        .p = { .min = 14, .max = 42 },
        .p1 = { .min = 2, .max = 6 },
        .p2 = { .dot_limit = 0,
                .p2_slow = 7, .p2_fast = 7
        },
};

static const intel_limit_t intel_limits_pineview_sdvo = {
        .dot = { .min = 20000, .max = 400000},
        .vco = { .min = 1700000, .max = 3500000 },
        /* Pineview's Ncounter is a ring counter */
        .n = { .min = 3, .max = 6 },
        .m = { .min = 2, .max = 256 },
        /* Pineview only has one combined m divider, which we treat as m2. */
        .m1 = { .min = 0, .max = 0 },
        .m2 = { .min = 0, .max = 254 },
        .p = { .min = 5, .max = 80 },
        .p1 = { .min = 1, .max = 8 },
        .p2 = { .dot_limit = 200000,
                .p2_slow = 10, .p2_fast = 5 },
};

static const intel_limit_t intel_limits_pineview_lvds = {
        .dot = { .min = 20000, .max = 400000 },
        .vco = { .min = 1700000, .max = 3500000 },
        .n = { .min = 3, .max = 6 },
        .m = { .min = 2, .max = 256 },
        .m1 = { .min = 0, .max = 0 },
        .m2 = { .min = 0, .max = 254 },
        .p = { .min = 7, .max = 112 },
        .p1 = { .min = 1, .max = 8 },
        .p2 = { .dot_limit = 112000,
                .p2_slow = 14, .p2_fast = 14 },
};

/* Ironlake / Sandybridge
 *
 * We calculate clock using (register_value + 2) for N/M1/M2, so here
 * the range value for them is (actual_value - 2).
 */
static const intel_limit_t intel_limits_ironlake_dac = {
        .dot = { .min = 25000, .max = 350000 },
        .vco = { .min = 1760000, .max = 3510000 },
        .n = { .min = 1, .max = 5 },
        .m = { .min = 79, .max = 127 },
        .m1 = { .min = 12, .max = 22 },
        .m2 = { .min = 5, .max = 9 },
        .p = { .min = 5, .max = 80 },
        .p1 = { .min = 1, .max = 8 },
        .p2 = { .dot_limit = 225000,
                .p2_slow = 10, .p2_fast = 5 },
};

static const intel_limit_t intel_limits_ironlake_single_lvds = {
        .dot = { .min = 25000, .max = 350000 },
        .vco = { .min = 1760000, .max = 3510000 },
        .n = { .min = 1, .max = 3 },
        .m = { .min = 79, .max = 118 },
        .m1 = { .min = 12, .max = 22 },
        .m2 = { .min = 5, .max = 9 },
        .p = { .min = 28, .max = 112 },
        .p1 = { .min = 2, .max = 8 },
        .p2 = { .dot_limit = 225000,
                .p2_slow = 14, .p2_fast = 14 },
};

static const intel_limit_t intel_limits_ironlake_dual_lvds = {
        .dot = { .min = 25000, .max = 350000 },
        .vco = { .min = 1760000, .max = 3510000 },
        .n = { .min = 1, .max = 3 },
        .m = { .min = 79, .max = 127 },
        .m1 = { .min = 12, .max = 22 },
        .m2 = { .min = 5, .max = 9 },
        .p = { .min = 14, .max = 56 },
        .p1 = { .min = 2, .max = 8 },
        .p2 = { .dot_limit = 225000,
                .p2_slow = 7, .p2_fast = 7 },
};

/* LVDS 100mhz refclk limits. */
static const intel_limit_t intel_limits_ironlake_single_lvds_100m = {
        .dot = { .min = 25000, .max = 350000 },
        .vco = { .min = 1760000, .max = 3510000 },
        .n = { .min = 1, .max = 2 },
        .m = { .min = 79, .max = 126 },
        .m1 = { .min = 12, .max = 22 },
        .m2 = { .min = 5, .max = 9 },
        .p = { .min = 28, .max = 112 },
        .p1 = { .min = 2, .max = 8 },
        .p2 = { .dot_limit = 225000,
                .p2_slow = 14, .p2_fast = 14 },
};

static const intel_limit_t intel_limits_ironlake_dual_lvds_100m = {
        .dot = { .min = 25000, .max = 350000 },
        .vco = { .min = 1760000, .max = 3510000 },
        .n = { .min = 1, .max = 3 },
        .m = { .min = 79, .max = 126 },
        .m1 = { .min = 12, .max = 22 },
        .m2 = { .min = 5, .max = 9 },
        .p = { .min = 14, .max = 42 },
        .p1 = { .min = 2, .max = 6 },
        .p2 = { .dot_limit = 225000,
                .p2_slow = 7, .p2_fast = 7 },
};

static const intel_limit_t intel_limits_vlv = {
         /*
          * These are the data rate limits (measured in fast clocks)
          * since those are the strictest limits we have. The fast
          * clock and actual rate limits are more relaxed, so checking
          * them would make no difference.
          */
        .dot = { .min = 25000 * 5, .max = 270000 * 5 },
        .vco = { .min = 4000000, .max = 6000000 },
        .n = { .min = 1, .max = 7 },
        .m1 = { .min = 2, .max = 3 },
        .m2 = { .min = 11, .max = 156 },
        .p1 = { .min = 2, .max = 3 },
        .p2 = { .p2_slow = 2, .p2_fast = 20 }, /* slow=min, fast=max */
};

static const intel_limit_t intel_limits_chv = {
        /*
         * These are the data rate limits (measured in fast clocks)
         * since those are the strictest limits we have.  The fast
         * clock and actual rate limits are more relaxed, so checking
         * them would make no difference.
         */
        .dot = { .min = 25000 * 5, .max = 540000 * 5},
        .vco = { .min = 4860000, .max = 6700000 },
        .n = { .min = 1, .max = 1 },
        .m1 = { .min = 2, .max = 2 },
        .m2 = { .min = 24 << 22, .max = 175 << 22 },
        .p1 = { .min = 2, .max = 4 },
        .p2 = { .p2_slow = 1, .p2_fast = 14 },
};

static void vlv_clock(int refclk, intel_clock_t *clock)
{
        clock->m = clock->m1 * clock->m2;
        clock->p = clock->p1 * clock->p2;
        if (WARN_ON(clock->n == 0 || clock->p == 0))
                return;
        clock->vco = DIV_ROUND_CLOSEST(refclk * clock->m, clock->n);
        clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
}

/**
 * Returns whether any output on the specified pipe is of the specified type
 */
bool intel_pipe_has_type(struct intel_crtc *crtc, enum intel_output_type type)
{
        struct drm_device *dev = crtc->base.dev;
        struct intel_encoder *encoder;

        for_each_encoder_on_crtc(dev, &crtc->base, encoder)
                if (encoder->type == type)
                        return true;

        return false;
}

/**
 * Returns whether any output on the specified pipe will have the specified
 * type after a staged modeset is complete, i.e., the same as
 * intel_pipe_has_type() but looking at encoder->new_crtc instead of
 * encoder->crtc.
 */
static bool intel_pipe_will_have_type(struct intel_crtc *crtc, int type)
{
        struct drm_device *dev = crtc->base.dev;
        struct intel_encoder *encoder;

        for_each_intel_encoder(dev, encoder)
                if (encoder->new_crtc == crtc && encoder->type == type)
                        return true;

        return false;
}

static const intel_limit_t *intel_ironlake_limit(struct intel_crtc *crtc,
                                                int refclk)
{
        struct drm_device *dev = crtc->base.dev;
        const intel_limit_t *limit;

        if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_LVDS)) {
                if (intel_is_dual_link_lvds(dev)) {
                        if (refclk == 100000)
                                limit = &intel_limits_ironlake_dual_lvds_100m;
                        else
                                limit = &intel_limits_ironlake_dual_lvds;
                } else {
                        if (refclk == 100000)
                                limit = &intel_limits_ironlake_single_lvds_100m;
                        else
                                limit = &intel_limits_ironlake_single_lvds;
                }
        } else
                limit = &intel_limits_ironlake_dac;

        return limit;
}

static const intel_limit_t *intel_g4x_limit(struct intel_crtc *crtc)
{
        struct drm_device *dev = crtc->base.dev;
        const intel_limit_t *limit;

        if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_LVDS)) {
                if (intel_is_dual_link_lvds(dev))
                        limit = &intel_limits_g4x_dual_channel_lvds;
                else
                        limit = &intel_limits_g4x_single_channel_lvds;
        } else if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_HDMI) ||
                   intel_pipe_will_have_type(crtc, INTEL_OUTPUT_ANALOG)) {
                limit = &intel_limits_g4x_hdmi;
        } else if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_SDVO)) {
                limit = &intel_limits_g4x_sdvo;
        } else /* The option is for other outputs */
                limit = &intel_limits_i9xx_sdvo;

        return limit;
}

static const intel_limit_t *intel_limit(struct intel_crtc *crtc, int refclk)
{
        struct drm_device *dev = crtc->base.dev;
        const intel_limit_t *limit;

        if (HAS_PCH_SPLIT(dev))
                limit = intel_ironlake_limit(crtc, refclk);
        else if (IS_G4X(dev)) {
                limit = intel_g4x_limit(crtc);
        } else if (IS_PINEVIEW(dev)) {
                if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_LVDS))
                        limit = &intel_limits_pineview_lvds;
                else
                        limit = &intel_limits_pineview_sdvo;
        } else if (IS_CHERRYVIEW(dev)) {
                limit = &intel_limits_chv;
        } else if (IS_VALLEYVIEW(dev)) {
                limit = &intel_limits_vlv;
        } else if (!IS_GEN2(dev)) {
                if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_LVDS))
                        limit = &intel_limits_i9xx_lvds;
                else
                        limit = &intel_limits_i9xx_sdvo;
        } else {
                if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_LVDS))
                        limit = &intel_limits_i8xx_lvds;
                else if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_DVO))
                        limit = &intel_limits_i8xx_dvo;
                else
                        limit = &intel_limits_i8xx_dac;
        }
        return limit;
}

/* m1 is reserved as 0 in Pineview, n is a ring counter */
static void pineview_clock(int refclk, intel_clock_t *clock)
{
        clock->m = clock->m2 + 2;
        clock->p = clock->p1 * clock->p2;
        if (WARN_ON(clock->n == 0 || clock->p == 0))
                return;
        clock->vco = DIV_ROUND_CLOSEST(refclk * clock->m, clock->n);
        clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
}

static uint32_t i9xx_dpll_compute_m(struct dpll *dpll)
{
        return 5 * (dpll->m1 + 2) + (dpll->m2 + 2);
}

static void i9xx_clock(int refclk, intel_clock_t *clock)
{
        clock->m = i9xx_dpll_compute_m(clock);
        clock->p = clock->p1 * clock->p2;
        if (WARN_ON(clock->n + 2 == 0 || clock->p == 0))
                return;
        clock->vco = DIV_ROUND_CLOSEST(refclk * clock->m, clock->n + 2);
        clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
}

static void chv_clock(int refclk, intel_clock_t *clock)
{
        clock->m = clock->m1 * clock->m2;
        clock->p = clock->p1 * clock->p2;
        if (WARN_ON(clock->n == 0 || clock->p == 0))
                return;
        clock->vco = DIV_ROUND_CLOSEST_ULL((uint64_t)refclk * clock->m,
                        clock->n << 22);
        clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
}

#define INTELPllInvalid(s)   do { /* DRM_DEBUG(s); */ return false; } while (0)
/**
 * Returns whether the given set of divisors are valid for a given refclk with
 * the given connectors.
 */

static bool intel_PLL_is_valid(struct drm_device *dev,
                               const intel_limit_t *limit,
                               const intel_clock_t *clock)
{
        if (clock->n   < limit->n.min   || limit->n.max   < clock->n)
                INTELPllInvalid("n out of range\n");
        if (clock->p1  < limit->p1.min  || limit->p1.max  < clock->p1)
                INTELPllInvalid("p1 out of range\n");
        if (clock->m2  < limit->m2.min  || limit->m2.max  < clock->m2)
                INTELPllInvalid("m2 out of range\n");
        if (clock->m1  < limit->m1.min  || limit->m1.max  < clock->m1)
                INTELPllInvalid("m1 out of range\n");

        if (!IS_PINEVIEW(dev) && !IS_VALLEYVIEW(dev))
                if (clock->m1 <= clock->m2)
                        INTELPllInvalid("m1 <= m2\n");

        if (!IS_VALLEYVIEW(dev)) {
                if (clock->p < limit->p.min || limit->p.max < clock->p)
                        INTELPllInvalid("p out of range\n");
                if (clock->m < limit->m.min || limit->m.max < clock->m)
                        INTELPllInvalid("m out of range\n");
        }

        if (clock->vco < limit->vco.min || limit->vco.max < clock->vco)
                INTELPllInvalid("vco out of range\n");
        /* XXX: We may need to be checking "Dot clock" depending on the multiplier,
         * connector, etc., rather than just a single range.
         */
        if (clock->dot < limit->dot.min || limit->dot.max < clock->dot)
                INTELPllInvalid("dot out of range\n");

        return true;
}

static bool
i9xx_find_best_dpll(const intel_limit_t *limit, struct intel_crtc *crtc,
                    int target, int refclk, intel_clock_t *match_clock,
                    intel_clock_t *best_clock)
{
        struct drm_device *dev = crtc->base.dev;
        intel_clock_t clock;
        int err = target;

        if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_LVDS)) {
                /*
                 * For LVDS just rely on its current settings for dual-channel.
                 * We haven't figured out how to reliably set up different
                 * single/dual channel state, if we even can.
                 */
                if (intel_is_dual_link_lvds(dev))
                        clock.p2 = limit->p2.p2_fast;
                else
                        clock.p2 = limit->p2.p2_slow;
        } else {
                if (target < limit->p2.dot_limit)
                        clock.p2 = limit->p2.p2_slow;
                else
                        clock.p2 = limit->p2.p2_fast;
        }

        memset(best_clock, 0, sizeof(*best_clock));

        for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max;
             clock.m1++) {
                for (clock.m2 = limit->m2.min;
                     clock.m2 <= limit->m2.max; clock.m2++) {
                        if (clock.m2 >= clock.m1)
                                break;
                        for (clock.n = limit->n.min;
                             clock.n <= limit->n.max; clock.n++) {
                                for (clock.p1 = limit->p1.min;
                                        clock.p1 <= limit->p1.max; clock.p1++) {
                                        int this_err;

                                        i9xx_clock(refclk, &clock);
                                        if (!intel_PLL_is_valid(dev, limit,
                                                                &clock))
                                                continue;
                                        if (match_clock &&
                                            clock.p != match_clock->p)
                                                continue;

                                        this_err = abs(clock.dot - target);
                                        if (this_err < err) {
                                                *best_clock = clock;
                                                err = this_err;
                                        }
                                }
                        }
                }
        }

        return (err != target);
}

static bool
pnv_find_best_dpll(const intel_limit_t *limit, struct intel_crtc *crtc,
                   int target, int refclk, intel_clock_t *match_clock,
                   intel_clock_t *best_clock)
{
        struct drm_device *dev = crtc->base.dev;
        intel_clock_t clock;
        int err = target;

        if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_LVDS)) {
                /*
                 * For LVDS just rely on its current settings for dual-channel.
                 * We haven't figured out how to reliably set up different
                 * single/dual channel state, if we even can.
                 */
                if (intel_is_dual_link_lvds(dev))
                        clock.p2 = limit->p2.p2_fast;
                else
                        clock.p2 = limit->p2.p2_slow;
        } else {
                if (target < limit->p2.dot_limit)
                        clock.p2 = limit->p2.p2_slow;
                else
                        clock.p2 = limit->p2.p2_fast;
        }

        memset(best_clock, 0, sizeof(*best_clock));

        for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max;
             clock.m1++) {
                for (clock.m2 = limit->m2.min;
                     clock.m2 <= limit->m2.max; clock.m2++) {
                        for (clock.n = limit->n.min;
                             clock.n <= limit->n.max; clock.n++) {
                                for (clock.p1 = limit->p1.min;
                                        clock.p1 <= limit->p1.max; clock.p1++) {
                                        int this_err;

                                        pineview_clock(refclk, &clock);
                                        if (!intel_PLL_is_valid(dev, limit,
                                                                &clock))
                                                continue;
                                        if (match_clock &&
                                            clock.p != match_clock->p)
                                                continue;

                                        this_err = abs(clock.dot - target);
                                        if (this_err < err) {
                                                *best_clock = clock;
                                                err = this_err;
                                        }
                                }
                        }
                }
        }

        return (err != target);
}

static bool
g4x_find_best_dpll(const intel_limit_t *limit, struct intel_crtc *crtc,
                   int target, int refclk, intel_clock_t *match_clock,
                   intel_clock_t *best_clock)
{
        struct drm_device *dev = crtc->base.dev;
        intel_clock_t clock;
        int max_n;
        bool found;
        /* approximately equals target * 0.00585 */
        int err_most = (target >> 8) + (target >> 9);
        found = false;

        if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_LVDS)) {
                if (intel_is_dual_link_lvds(dev))
                        clock.p2 = limit->p2.p2_fast;
                else
                        clock.p2 = limit->p2.p2_slow;
        } else {
                if (target < limit->p2.dot_limit)
                        clock.p2 = limit->p2.p2_slow;
                else
                        clock.p2 = limit->p2.p2_fast;
        }

        memset(best_clock, 0, sizeof(*best_clock));
        max_n = limit->n.max;
        /* based on hardware requirement, prefer smaller n to precision */
        for (clock.n = limit->n.min; clock.n <= max_n; clock.n++) {
                /* based on hardware requirement, prefere larger m1,m2 */
                for (clock.m1 = limit->m1.max;
                     clock.m1 >= limit->m1.min; clock.m1--) {
                        for (clock.m2 = limit->m2.max;
                             clock.m2 >= limit->m2.min; clock.m2--) {
                                for (clock.p1 = limit->p1.max;
                                     clock.p1 >= limit->p1.min; clock.p1--) {
                                        int this_err;

                                        i9xx_clock(refclk, &clock);
                                        if (!intel_PLL_is_valid(dev, limit,
                                                                &clock))
                                                continue;

                                        this_err = abs(clock.dot - target);
                                        if (this_err < err_most) {
                                                *best_clock = clock;
                                                err_most = this_err;
                                                max_n = clock.n;
                                                found = true;
                                        }
                                }
                        }
                }
        }
        return found;
}

static bool
vlv_find_best_dpll(const intel_limit_t *limit, struct intel_crtc *crtc,
                   int target, int refclk, intel_clock_t *match_clock,
                   intel_clock_t *best_clock)
{
        struct drm_device *dev = crtc->base.dev;
        intel_clock_t clock;
        unsigned int bestppm = 1000000;
        /* min update 19.2 MHz */
        int max_n = min(limit->n.max, refclk / 19200);
        bool found = false;

        target *= 5; /* fast clock */

        memset(best_clock, 0, sizeof(*best_clock));

        /* based on hardware requirement, prefer smaller n to precision */
        for (clock.n = limit->n.min; clock.n <= max_n; clock.n++) {
                for (clock.p1 = limit->p1.max; clock.p1 >= limit->p1.min; clock.p1--) {
                        for (clock.p2 = limit->p2.p2_fast; clock.p2 >= limit->p2.p2_slow;
                             clock.p2 -= clock.p2 > 10 ? 2 : 1) {
                                clock.p = clock.p1 * clock.p2;
                                /* based on hardware requirement, prefer bigger m1,m2 values */
                                for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max; clock.m1++) {
                                        unsigned int ppm, diff;

                                        clock.m2 = DIV_ROUND_CLOSEST(target * clock.p * clock.n,
                                                                     refclk * clock.m1);

                                        vlv_clock(refclk, &clock);

                                        if (!intel_PLL_is_valid(dev, limit,
                                                                &clock))
                                                continue;

                                        diff = abs(clock.dot - target);
                                        ppm = div_u64(1000000ULL * diff, target);

                                        if (ppm < 100 && clock.p > best_clock->p) {
                                                bestppm = 0;
                                                *best_clock = clock;
                                                found = true;
                                        }

                                        if (bestppm >= 10 && ppm < bestppm - 10) {
                                                bestppm = ppm;
                                                *best_clock = clock;
                                                found = true;
                                        }
                                }
                        }
                }
        }

        return found;
}

static bool
chv_find_best_dpll(const intel_limit_t *limit, struct intel_crtc *crtc,
                   int target, int refclk, intel_clock_t *match_clock,
                   intel_clock_t *best_clock)
{
        struct drm_device *dev = crtc->base.dev;
        intel_clock_t clock;
        uint64_t m2;
        int found = false;

        memset(best_clock, 0, sizeof(*best_clock));

        /*
         * Based on hardware doc, the n always set to 1, and m1 always
         * set to 2.  If requires to support 200Mhz refclk, we need to
         * revisit this because n may not 1 anymore.
         */
        clock.n = 1, clock.m1 = 2;
        target *= 5;    /* fast clock */

        for (clock.p1 = limit->p1.max; clock.p1 >= limit->p1.min; clock.p1--) {
                for (clock.p2 = limit->p2.p2_fast;
                                clock.p2 >= limit->p2.p2_slow;
                                clock.p2 -= clock.p2 > 10 ? 2 : 1) {

                        clock.p = clock.p1 * clock.p2;

                        m2 = DIV_ROUND_CLOSEST_ULL(((uint64_t)target * clock.p *
                                        clock.n) << 22, refclk * clock.m1);

                        if (m2 > INT_MAX/clock.m1)
                                continue;

                        clock.m2 = m2;

                        chv_clock(refclk, &clock);

                        if (!intel_PLL_is_valid(dev, limit, &clock))
                                continue;

                        /* based on hardware requirement, prefer bigger p
                         */
                        if (clock.p > best_clock->p) {
                                *best_clock = clock;
                                found = true;
                        }
                }
        }

        return found;
}

bool intel_crtc_active(struct drm_crtc *crtc)
{
        struct intel_crtc *intel_crtc = to_intel_crtc(crtc);

        /* Be paranoid as we can arrive here with only partial
         * state retrieved from the hardware during setup.
         *
         * We can ditch the adjusted_mode.crtc_clock check as soon
         * as Haswell has gained clock readout/fastboot support.
         *
         * We can ditch the crtc->primary->fb check as soon as we can
         * properly reconstruct framebuffers.
         */
        return intel_crtc->active && crtc->primary->fb &&
                intel_crtc->config.adjusted_mode.crtc_clock;
}

enum transcoder intel_pipe_to_cpu_transcoder(struct drm_i915_private *dev_priv,
                                             enum pipe pipe)
{
        struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
        struct intel_crtc *intel_crtc = to_intel_crtc(crtc);

        return intel_crtc->config.cpu_transcoder;
}

static bool pipe_dsl_stopped(struct drm_device *dev, enum pipe pipe)
{
        struct drm_i915_private *dev_priv = dev->dev_private;
        u32 reg = PIPEDSL(pipe);
        u32 line1, line2;
        u32 line_mask;

        if (IS_GEN2(dev))
                line_mask = DSL_LINEMASK_GEN2;
        else
                line_mask = DSL_LINEMASK_GEN3;

        line1 = I915_READ(reg) & line_mask;
        mdelay(5);
        line2 = I915_READ(reg) & line_mask;

        return line1 == line2;
}

/*
 * intel_wait_for_pipe_off - wait for pipe to turn off
 * @crtc: crtc whose pipe to wait for
 *
 * After disabling a pipe, we can't wait for vblank in the usual way,
 * spinning on the vblank interrupt status bit, since we won't actually
 * see an interrupt when the pipe is disabled.
 *
 * On Gen4 and above:
 *   wait for the pipe register state bit to turn off
 *
 * Otherwise:
 *   wait for the display line value to settle (it usually
 *   ends up stopping at the start of the next frame).
 *
 */
static void intel_wait_for_pipe_off(struct intel_crtc *crtc)
{
        struct drm_device *dev = crtc->base.dev;
        struct drm_i915_private *dev_priv = dev->dev_private;
        enum transcoder cpu_transcoder = crtc->config.cpu_transcoder;
        enum pipe pipe = crtc->pipe;

        if (INTEL_INFO(dev)->gen >= 4) {
                int reg = PIPECONF(cpu_transcoder);

                /* Wait for the Pipe State to go off */
                if (wait_for((I915_READ(reg) & I965_PIPECONF_ACTIVE) == 0,
                             100))
                        WARN(1, "pipe_off wait timed out\n");
        } else {
                /* Wait for the display line to settle */
                if (wait_for(pipe_dsl_stopped(dev, pipe), 100))
                        WARN(1, "pipe_off wait timed out\n");
        }
}

/*
 * ibx_digital_port_connected - is the specified port connected?
 * @dev_priv: i915 private structure
 * @port: the port to test
 *
 * Returns true if @port is connected, false otherwise.
 */
bool ibx_digital_port_connected(struct drm_i915_private *dev_priv,
                                struct intel_digital_port *port)
{
        u32 bit;

        if (HAS_PCH_IBX(dev_priv->dev)) {
                switch (port->port) {
                case PORT_B:
                        bit = SDE_PORTB_HOTPLUG;
                        break;
                case PORT_C:
                        bit = SDE_PORTC_HOTPLUG;
                        break;
                case PORT_D:
                        bit = SDE_PORTD_HOTPLUG;
                        break;
                default:
                        return true;
                }
        } else {
                switch (port->port) {
                case PORT_B:
                        bit = SDE_PORTB_HOTPLUG_CPT;
                        break;
                case PORT_C:
                        bit = SDE_PORTC_HOTPLUG_CPT;
                        break;
                case PORT_D:

                        bit = SDE_PORTD_HOTPLUG_CPT;
                        break;
                default:
                        return true;
                }
        }

        return I915_READ(SDEISR) & bit;
}

static const char *state_string(bool enabled)
{
        return enabled ? "on" : "off";
}

/* Only for pre-ILK configs */
void assert_pll(struct drm_i915_private *dev_priv,
                enum pipe pipe, bool state)
{
        int reg;
        u32 val;
        bool cur_state;

        reg = DPLL(pipe);
        val = I915_READ(reg);
        cur_state = !!(val & DPLL_VCO_ENABLE);
        WARN(cur_state != state,
             "PLL state assertion failure (expected %s, current %s)\n",
             state_string(state), state_string(cur_state));
}

/* XXX: the dsi pll is shared between MIPI DSI ports */
static void assert_dsi_pll(struct drm_i915_private *dev_priv, bool state)
{
        u32 val;
        bool cur_state;

        mutex_lock(&dev_priv->dpio_lock);
        val = vlv_cck_read(dev_priv, CCK_REG_DSI_PLL_CONTROL);
        mutex_unlock(&dev_priv->dpio_lock);

        cur_state = val & DSI_PLL_VCO_EN;
        WARN(cur_state != state,
             "DSI PLL state assertion failure (expected %s, current %s)\n",
             state_string(state), state_string(cur_state));
}
#define assert_dsi_pll_enabled(d) assert_dsi_pll(d, true)
#define assert_dsi_pll_disabled(d) assert_dsi_pll(d, false)

struct intel_shared_dpll *
intel_crtc_to_shared_dpll(struct intel_crtc *crtc)
{
        struct drm_i915_private *dev_priv = crtc->base.dev->dev_private;

        if (crtc->config.shared_dpll < 0)
                return NULL;

        return &dev_priv->shared_dplls[crtc->config.shared_dpll];
}

/* For ILK+ */
void assert_shared_dpll(struct drm_i915_private *dev_priv,
                        struct intel_shared_dpll *pll,
                        bool state)
{
        bool cur_state;
        struct intel_dpll_hw_state hw_state;

        if (WARN (!pll,
                  "asserting DPLL %s with no DPLL\n", state_string(state)))
                return;

        cur_state = pll->get_hw_state(dev_priv, pll, &hw_state);
        WARN(cur_state != state,
             "%s assertion failure (expected %s, current %s)\n",
             pll->name, state_string(state), state_string(cur_state));
}

static void assert_fdi_tx(struct drm_i915_private *dev_priv,
                          enum pipe pipe, bool state)
{
        int reg;
        u32 val;
        bool cur_state;
        enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
                                                                      pipe);

        if (HAS_DDI(dev_priv->dev)) {
                /* DDI does not have a specific FDI_TX register */
                reg = TRANS_DDI_FUNC_CTL(cpu_transcoder);
                val = I915_READ(reg);
                cur_state = !!(val & TRANS_DDI_FUNC_ENABLE);
        } else {
                reg = FDI_TX_CTL(pipe);
                val = I915_READ(reg);
                cur_state = !!(val & FDI_TX_ENABLE);
        }
        WARN(cur_state != state,
             "FDI TX state assertion failure (expected %s, current %s)\n",
             state_string(state), state_string(cur_state));
}
#define assert_fdi_tx_enabled(d, p) assert_fdi_tx(d, p, true)
#define assert_fdi_tx_disabled(d, p) assert_fdi_tx(d, p, false)

static void assert_fdi_rx(struct drm_i915_private *dev_priv,
                          enum pipe pipe, bool state)
{
        int reg;
        u32 val;
        bool cur_state;

        reg = FDI_RX_CTL(pipe);
        val = I915_READ(reg);
        cur_state = !!(val & FDI_RX_ENABLE);
        WARN(cur_state != state,
             "FDI RX state assertion failure (expected %s, current %s)\n",
             state_string(state), state_string(cur_state));
}
#define assert_fdi_rx_enabled(d, p) assert_fdi_rx(d, p, true)
#define assert_fdi_rx_disabled(d, p) assert_fdi_rx(d, p, false)

static void assert_fdi_tx_pll_enabled(struct drm_i915_private *dev_priv,
                                      enum pipe pipe)
{
        int reg;
        u32 val;

        /* ILK FDI PLL is always enabled */
        if (INTEL_INFO(dev_priv->dev)->gen == 5)
                return;

        /* On Haswell, DDI ports are responsible for the FDI PLL setup */
        if (HAS_DDI(dev_priv->dev))
                return;

        reg = FDI_TX_CTL(pipe);
        val = I915_READ(reg);
        WARN(!(val & FDI_TX_PLL_ENABLE), "FDI TX PLL assertion failure, should be active but is disabled\n");
}

void assert_fdi_rx_pll(struct drm_i915_private *dev_priv,
                       enum pipe pipe, bool state)
{
        int reg;
        u32 val;
        bool cur_state;

        reg = FDI_RX_CTL(pipe);
        val = I915_READ(reg);
        cur_state = !!(val & FDI_RX_PLL_ENABLE);
        WARN(cur_state != state,
             "FDI RX PLL assertion failure (expected %s, current %s)\n",
             state_string(state), state_string(cur_state));
}

void assert_panel_unlocked(struct drm_i915_private *dev_priv,
                           enum pipe pipe)
{
        struct drm_device *dev = dev_priv->dev;
        int pp_reg;
        u32 val;
        enum pipe panel_pipe = PIPE_A;
        bool locked = true;

        if (WARN_ON(HAS_DDI(dev)))
                return;

        if (HAS_PCH_SPLIT(dev)) {
                u32 port_sel;

                pp_reg = PCH_PP_CONTROL;
                port_sel = I915_READ(PCH_PP_ON_DELAYS) & PANEL_PORT_SELECT_MASK;

                if (port_sel == PANEL_PORT_SELECT_LVDS &&
                    I915_READ(PCH_LVDS) & LVDS_PIPEB_SELECT)
                        panel_pipe = PIPE_B;
                /* XXX: else fix for eDP */
        } else if (IS_VALLEYVIEW(dev)) {
                /* presumably write lock depends on pipe, not port select */
                pp_reg = VLV_PIPE_PP_CONTROL(pipe);
                panel_pipe = pipe;
        } else {
                pp_reg = PP_CONTROL;
                if (I915_READ(LVDS) & LVDS_PIPEB_SELECT)
                        panel_pipe = PIPE_B;
        }

        val = I915_READ(pp_reg);
        if (!(val & PANEL_POWER_ON) ||
            ((val & PANEL_UNLOCK_MASK) == PANEL_UNLOCK_REGS))
                locked = false;

        WARN(panel_pipe == pipe && locked,
             "panel assertion failure, pipe %c regs locked\n",
             pipe_name(pipe));
}

static void assert_cursor(struct drm_i915_private *dev_priv,
                          enum pipe pipe, bool state)
{
        struct drm_device *dev = dev_priv->dev;
        bool cur_state;

        if (IS_845G(dev) || IS_I865G(dev))
                cur_state = I915_READ(_CURACNTR) & CURSOR_ENABLE;
        else
                cur_state = I915_READ(CURCNTR(pipe)) & CURSOR_MODE;

        WARN(cur_state != state,
             "cursor on pipe %c assertion failure (expected %s, current %s)\n",
             pipe_name(pipe), state_string(state), state_string(cur_state));
}
#define assert_cursor_enabled(d, p) assert_cursor(d, p, true)
#define assert_cursor_disabled(d, p) assert_cursor(d, p, false)

void assert_pipe(struct drm_i915_private *dev_priv,
                 enum pipe pipe, bool state)
{
        int reg;
        u32 val;
        bool cur_state;
        enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
                                                                      pipe);

        /* if we need the pipe quirk it must be always on */
        if ((pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE) ||
            (pipe == PIPE_B && dev_priv->quirks & QUIRK_PIPEB_FORCE))
                state = true;

        if (!intel_display_power_is_enabled(dev_priv,
                                POWER_DOMAIN_TRANSCODER(cpu_transcoder))) {
                cur_state = false;
        } else {
                reg = PIPECONF(cpu_transcoder);
                val = I915_READ(reg);
                cur_state = !!(val & PIPECONF_ENABLE);
        }

        WARN(cur_state != state,
             "pipe %c assertion failure (expected %s, current %s)\n",
             pipe_name(pipe), state_string(state), state_string(cur_state));
}

static void assert_plane(struct drm_i915_private *dev_priv,
                         enum plane plane, bool state)
{
        int reg;
        u32 val;
        bool cur_state;

        reg = DSPCNTR(plane);
        val = I915_READ(reg);
        cur_state = !!(val & DISPLAY_PLANE_ENABLE);
        WARN(cur_state != state,
             "plane %c assertion failure (expected %s, current %s)\n",
             plane_name(plane), state_string(state), state_string(cur_state));
}

#define assert_plane_enabled(d, p) assert_plane(d, p, true)
#define assert_plane_disabled(d, p) assert_plane(d, p, false)

static void assert_planes_disabled(struct drm_i915_private *dev_priv,
                                   enum pipe pipe)
{
        struct drm_device *dev = dev_priv->dev;
        int reg, i;
        u32 val;
        int cur_pipe;

        /* Primary planes are fixed to pipes on gen4+ */
        if (INTEL_INFO(dev)->gen >= 4) {
                reg = DSPCNTR(pipe);
                val = I915_READ(reg);
                WARN(val & DISPLAY_PLANE_ENABLE,
                     "plane %c assertion failure, should be disabled but not\n",
                     plane_name(pipe));
                return;
        }

        /* Need to check both planes against the pipe */
        for_each_pipe(dev_priv, i) {
                reg = DSPCNTR(i);
                val = I915_READ(reg);
                cur_pipe = (val & DISPPLANE_SEL_PIPE_MASK) >>
                        DISPPLANE_SEL_PIPE_SHIFT;
                WARN((val & DISPLAY_PLANE_ENABLE) && pipe == cur_pipe,
                     "plane %c assertion failure, should be off on pipe %c but is still active\n",
                     plane_name(i), pipe_name(pipe));
        }
}

static void assert_sprites_disabled(struct drm_i915_private *dev_priv,
                                    enum pipe pipe)
{
        struct drm_device *dev = dev_priv->dev;
        int reg, sprite;
        u32 val;

        if (INTEL_INFO(dev)->gen >= 9) {
                for_each_sprite(pipe, sprite) {
                        val = I915_READ(PLANE_CTL(pipe, sprite));
                        WARN(val & PLANE_CTL_ENABLE,
                             "plane %d assertion failure, should be off on pipe %c but is still active\n",
                             sprite, pipe_name(pipe));
                }
        } else if (IS_VALLEYVIEW(dev)) {
                for_each_sprite(pipe, sprite) {
                        reg = SPCNTR(pipe, sprite);
                        val = I915_READ(reg);
                        WARN(val & SP_ENABLE,
                             "sprite %c assertion failure, should be off on pipe %c but is still active\n",
                             sprite_name(pipe, sprite), pipe_name(pipe));
                }
        } else if (INTEL_INFO(dev)->gen >= 7) {
                reg = SPRCTL(pipe);
                val = I915_READ(reg);
                WARN(val & SPRITE_ENABLE,
                     "sprite %c assertion failure, should be off on pipe %c but is still active\n",
                     plane_name(pipe), pipe_name(pipe));
        } else if (INTEL_INFO(dev)->gen >= 5) {
                reg = DVSCNTR(pipe);
                val = I915_READ(reg);
                WARN(val & DVS_ENABLE,
                     "sprite %c assertion failure, should be off on pipe %c but is still active\n",
                     plane_name(pipe), pipe_name(pipe));
        }
}

static void assert_vblank_disabled(struct drm_crtc *crtc)
{
        if (WARN_ON(drm_crtc_vblank_get(crtc) == 0))
                drm_crtc_vblank_put(crtc);
}

static void ibx_assert_pch_refclk_enabled(struct drm_i915_private *dev_priv)
{
        u32 val;
        bool enabled;

        WARN_ON(!(HAS_PCH_IBX(dev_priv->dev) || HAS_PCH_CPT(dev_priv->dev)));

        val = I915_READ(PCH_DREF_CONTROL);
        enabled = !!(val & (DREF_SSC_SOURCE_MASK | DREF_NONSPREAD_SOURCE_MASK |
                            DREF_SUPERSPREAD_SOURCE_MASK));
        WARN(!enabled, "PCH refclk assertion failure, should be active but is disabled\n");
}

static void assert_pch_transcoder_disabled(struct drm_i915_private *dev_priv,
                                           enum pipe pipe)
{
        int reg;
        u32 val;
        bool enabled;

        reg = PCH_TRANSCONF(pipe);
        val = I915_READ(reg);
        enabled = !!(val & TRANS_ENABLE);
        WARN(enabled,
             "transcoder assertion failed, should be off on pipe %c but is still active\n",
             pipe_name(pipe));
}

static bool dp_pipe_enabled(struct drm_i915_private *dev_priv,
                            enum pipe pipe, u32 port_sel, u32 val)
{
        if ((val & DP_PORT_EN) == 0)
                return false;

        if (HAS_PCH_CPT(dev_priv->dev)) {
                u32     trans_dp_ctl_reg = TRANS_DP_CTL(pipe);
                u32     trans_dp_ctl = I915_READ(trans_dp_ctl_reg);
                if ((trans_dp_ctl & TRANS_DP_PORT_SEL_MASK) != port_sel)
                        return false;
        } else if (IS_CHERRYVIEW(dev_priv->dev)) {
                if ((val & DP_PIPE_MASK_CHV) != DP_PIPE_SELECT_CHV(pipe))
                        return false;
        } else {
                if ((val & DP_PIPE_MASK) != (pipe << 30))
                        return false;
        }
        return true;
}

static bool hdmi_pipe_enabled(struct drm_i915_private *dev_priv,
                              enum pipe pipe, u32 val)
{
        if ((val & SDVO_ENABLE) == 0)
                return false;

        if (HAS_PCH_CPT(dev_priv->dev)) {
                if ((val & SDVO_PIPE_SEL_MASK_CPT) != SDVO_PIPE_SEL_CPT(pipe))
                        return false;
        } else if (IS_CHERRYVIEW(dev_priv->dev)) {
                if ((val & SDVO_PIPE_SEL_MASK_CHV) != SDVO_PIPE_SEL_CHV(pipe))
                        return false;
        } else {
                if ((val & SDVO_PIPE_SEL_MASK) != SDVO_PIPE_SEL(pipe))
                        return false;
        }
        return true;
}

static bool lvds_pipe_enabled(struct drm_i915_private *dev_priv,
                              enum pipe pipe, u32 val)
{
        if ((val & LVDS_PORT_EN) == 0)
                return false;

        if (HAS_PCH_CPT(dev_priv->dev)) {
                if ((val & PORT_TRANS_SEL_MASK) != PORT_TRANS_SEL_CPT(pipe))
                        return false;
        } else {
                if ((val & LVDS_PIPE_MASK) != LVDS_PIPE(pipe))
                        return false;
        }
        return true;
}

static bool adpa_pipe_enabled(struct drm_i915_private *dev_priv,
                              enum pipe pipe, u32 val)
{
        if ((val & ADPA_DAC_ENABLE) == 0)
                return false;
        if (HAS_PCH_CPT(dev_priv->dev)) {
                if ((val & PORT_TRANS_SEL_MASK) != PORT_TRANS_SEL_CPT(pipe))
                        return false;
        } else {
                if ((val & ADPA_PIPE_SELECT_MASK) != ADPA_PIPE_SELECT(pipe))
                        return false;
        }
        return true;
}

static void assert_pch_dp_disabled(struct drm_i915_private *dev_priv,
                                   enum pipe pipe, int reg, u32 port_sel)
{
        u32 val = I915_READ(reg);
        WARN(dp_pipe_enabled(dev_priv, pipe, port_sel, val),
             "PCH DP (0x%08x) enabled on transcoder %c, should be disabled\n",
             reg, pipe_name(pipe));

        WARN(HAS_PCH_IBX(dev_priv->dev) && (val & DP_PORT_EN) == 0
             && (val & DP_PIPEB_SELECT),
             "IBX PCH dp port still using transcoder B\n");
}

static void assert_pch_hdmi_disabled(struct drm_i915_private *dev_priv,
                                     enum pipe pipe, int reg)
{
        u32 val = I915_READ(reg);
        WARN(hdmi_pipe_enabled(dev_priv, pipe, val),
             "PCH HDMI (0x%08x) enabled on transcoder %c, should be disabled\n",
             reg, pipe_name(pipe));

        WARN(HAS_PCH_IBX(dev_priv->dev) && (val & SDVO_ENABLE) == 0
             && (val & SDVO_PIPE_B_SELECT),
             "IBX PCH hdmi port still using transcoder B\n");
}

static void assert_pch_ports_disabled(struct drm_i915_private *dev_priv,
                                      enum pipe pipe)
{
        int reg;
        u32 val;

        assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_B, TRANS_DP_PORT_SEL_B);
        assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_C, TRANS_DP_PORT_SEL_C);
        assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_D, TRANS_DP_PORT_SEL_D);

        reg = PCH_ADPA;
        val = I915_READ(reg);
        WARN(adpa_pipe_enabled(dev_priv, pipe, val),
             "PCH VGA enabled on transcoder %c, should be disabled\n",
             pipe_name(pipe));

        reg = PCH_LVDS;
        val = I915_READ(reg);
        WARN(lvds_pipe_enabled(dev_priv, pipe, val),
             "PCH LVDS enabled on transcoder %c, should be disabled\n",
             pipe_name(pipe));

        assert_pch_hdmi_disabled(dev_priv, pipe, PCH_HDMIB);
        assert_pch_hdmi_disabled(dev_priv, pipe, PCH_HDMIC);
        assert_pch_hdmi_disabled(dev_priv, pipe, PCH_HDMID);
}

static void intel_init_dpio(struct drm_device *dev)
{
        struct drm_i915_private *dev_priv = dev->dev_private;

        if (!IS_VALLEYVIEW(dev))
                return;

        /*
         * IOSF_PORT_DPIO is used for VLV x2 PHY (DP/HDMI B and C),
         * CHV x1 PHY (DP/HDMI D)
         * IOSF_PORT_DPIO_2 is used for CHV x2 PHY (DP/HDMI B and C)
         */
        if (IS_CHERRYVIEW(dev)) {
                DPIO_PHY_IOSF_PORT(DPIO_PHY0) = IOSF_PORT_DPIO_2;
                DPIO_PHY_IOSF_PORT(DPIO_PHY1) = IOSF_PORT_DPIO;
        } else {
                DPIO_PHY_IOSF_PORT(DPIO_PHY0) = IOSF_PORT_DPIO;
        }
}

static void vlv_enable_pll(struct intel_crtc *crtc,
                           const struct intel_crtc_config *pipe_config)
{
        struct drm_device *dev = crtc->base.dev;
        struct drm_i915_private *dev_priv = dev->dev_private;
        int reg = DPLL(crtc->pipe);
        u32 dpll = pipe_config->dpll_hw_state.dpll;

        assert_pipe_disabled(dev_priv, crtc->pipe);

        /* No really, not for ILK+ */
        BUG_ON(!IS_VALLEYVIEW(dev_priv->dev));

        /* PLL is protected by panel, make sure we can write it */
        if (IS_MOBILE(dev_priv->dev))
                assert_panel_unlocked(dev_priv, crtc->pipe);

        I915_WRITE(reg, dpll);
        POSTING_READ(reg);
        udelay(150);

        if (wait_for(((I915_READ(reg) & DPLL_LOCK_VLV) == DPLL_LOCK_VLV), 1))
                DRM_ERROR("DPLL %d failed to lock\n", crtc->pipe);

        I915_WRITE(DPLL_MD(crtc->pipe), pipe_config->dpll_hw_state.dpll_md);
        POSTING_READ(DPLL_MD(crtc->pipe));

        /* We do this three times for luck */
        I915_WRITE(reg, dpll);
        POSTING_READ(reg);
        udelay(150); /* wait for warmup */
        I915_WRITE(reg, dpll);
        POSTING_READ(reg);
        udelay(150); /* wait for warmup */
        I915_WRITE(reg, dpll);
        POSTING_READ(reg);
        udelay(150); /* wait for warmup */
}

static void chv_enable_pll(struct intel_crtc *crtc,
                           const struct intel_crtc_config *pipe_config)
{
        struct drm_device *dev = crtc->base.dev;
        struct drm_i915_private *dev_priv = dev->dev_private;
        int pipe = crtc->pipe;
        enum dpio_channel port = vlv_pipe_to_channel(pipe);
        u32 tmp;

        assert_pipe_disabled(dev_priv, crtc->pipe);

        BUG_ON(!IS_CHERRYVIEW(dev_priv->dev));

        mutex_lock(&dev_priv->dpio_lock);

        /* Enable back the 10bit clock to display controller */
        tmp = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW14(port));
        tmp |= DPIO_DCLKP_EN;
        vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW14(port), tmp);

        /*
         * Need to wait > 100ns between dclkp clock enable bit and PLL enable.
         */
        udelay(1);

        /* Enable PLL */
        I915_WRITE(DPLL(pipe), pipe_config->dpll_hw_state.dpll);

        /* Check PLL is locked */
        if (wait_for(((I915_READ(DPLL(pipe)) & DPLL_LOCK_VLV) == DPLL_LOCK_VLV), 1))
                DRM_ERROR("PLL %d failed to lock\n", pipe);

        /* not sure when this should be written */
        I915_WRITE(DPLL_MD(pipe), pipe_config->dpll_hw_state.dpll_md);
        POSTING_READ(DPLL_MD(pipe));

        mutex_unlock(&dev_priv->dpio_lock);
}

static int intel_num_dvo_pipes(struct drm_device *dev)
{
        struct intel_crtc *crtc;
        int count = 0;

        for_each_intel_crtc(dev, crtc)
                count += crtc->active &&
                        intel_pipe_has_type(crtc, INTEL_OUTPUT_DVO);

        return count;
}

static void i9xx_enable_pll(struct intel_crtc *crtc)
{
        struct drm_device *dev = crtc->base.dev;
        struct drm_i915_private *dev_priv = dev->dev_private;
        int reg = DPLL(crtc->pipe);
        u32 dpll = crtc->config.dpll_hw_state.dpll;

        assert_pipe_disabled(dev_priv, crtc->pipe);

        /* No really, not for ILK+ */
        BUG_ON(INTEL_INFO(dev)->gen >= 5);

        /* PLL is protected by panel, make sure we can write it */
        if (IS_MOBILE(dev) && !IS_I830(dev))
                assert_panel_unlocked(dev_priv, crtc->pipe);

        /* Enable DVO 2x clock on both PLLs if necessary */
        if (IS_I830(dev) && intel_num_dvo_pipes(dev) > 0) {
                /*
                 * It appears to be important that we don't enable this
                 * for the current pipe before otherwise configuring the
                 * PLL. No idea how this should be handled if multiple
                 * DVO outputs are enabled simultaneosly.
                 */
                dpll |= DPLL_DVO_2X_MODE;
                I915_WRITE(DPLL(!crtc->pipe),
                           I915_READ(DPLL(!crtc->pipe)) | DPLL_DVO_2X_MODE);
        }

        /* Wait for the clocks to stabilize. */
        POSTING_READ(reg);
        udelay(150);

        if (INTEL_INFO(dev)->gen >= 4) {
                I915_WRITE(DPLL_MD(crtc->pipe),
                           crtc->config.dpll_hw_state.dpll_md);
        } else {
                /* The pixel multiplier can only be updated once the
                 * DPLL is enabled and the clocks are stable.
                 *
                 * So write it again.
                 */
                I915_WRITE(reg, dpll);
        }

        /* We do this three times for luck */
        I915_WRITE(reg, dpll);
        POSTING_READ(reg);
        udelay(150); /* wait for warmup */
        I915_WRITE(reg, dpll);
        POSTING_READ(reg);
        udelay(150); /* wait for warmup */
        I915_WRITE(reg, dpll);
        POSTING_READ(reg);
        udelay(150); /* wait for warmup */
}

/**
 * i9xx_disable_pll - disable a PLL
 * @dev_priv: i915 private structure
 * @pipe: pipe PLL to disable
 *
 * Disable the PLL for @pipe, making sure the pipe is off first.
 *
 * Note!  This is for pre-ILK only.
 */
static void i9xx_disable_pll(struct intel_crtc *crtc)
{
        struct drm_device *dev = crtc->base.dev;
        struct drm_i915_private *dev_priv = dev->dev_private;
        enum pipe pipe = crtc->pipe;

        /* Disable DVO 2x clock on both PLLs if necessary */
        if (IS_I830(dev) &&
            intel_pipe_has_type(crtc, INTEL_OUTPUT_DVO) &&
            intel_num_dvo_pipes(dev) == 1) {
                I915_WRITE(DPLL(PIPE_B),
                           I915_READ(DPLL(PIPE_B)) & ~DPLL_DVO_2X_MODE);
                I915_WRITE(DPLL(PIPE_A),
                           I915_READ(DPLL(PIPE_A)) & ~DPLL_DVO_2X_MODE);
        }

        /* Don't disable pipe or pipe PLLs if needed */
        if ((pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE) ||
            (pipe == PIPE_B && dev_priv->quirks & QUIRK_PIPEB_FORCE))
                return;

        /* Make sure the pipe isn't still relying on us */
        assert_pipe_disabled(dev_priv, pipe);

        I915_WRITE(DPLL(pipe), 0);
        POSTING_READ(DPLL(pipe));
}

static void vlv_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
{
        u32 val = 0;

        /* Make sure the pipe isn't still relying on us */
        assert_pipe_disabled(dev_priv, pipe);

        /*
         * Leave integrated clock source and reference clock enabled for pipe B.
         * The latter is needed for VGA hotplug / manual detection.
         */
        if (pipe == PIPE_B)
                val = DPLL_INTEGRATED_CRI_CLK_VLV | DPLL_REFA_CLK_ENABLE_VLV;
        I915_WRITE(DPLL(pipe), val);
        POSTING_READ(DPLL(pipe));

}

static void chv_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
{
        enum dpio_channel port = vlv_pipe_to_channel(pipe);
        u32 val;

        /* Make sure the pipe isn't still relying on us */
        assert_pipe_disabled(dev_priv, pipe);

        /* Set PLL en = 0 */
        val = DPLL_SSC_REF_CLOCK_CHV | DPLL_REFA_CLK_ENABLE_VLV;
        if (pipe != PIPE_A)
                val |= DPLL_INTEGRATED_CRI_CLK_VLV;
        I915_WRITE(DPLL(pipe), val);
        POSTING_READ(DPLL(pipe));

        mutex_lock(&dev_priv->dpio_lock);

        /* Disable 10bit clock to display controller */
        val = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW14(port));
        val &= ~DPIO_DCLKP_EN;
        vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW14(port), val);

        /* disable left/right clock distribution */
        if (pipe != PIPE_B) {
                val = vlv_dpio_read(dev_priv, pipe, _CHV_CMN_DW5_CH0);
                val &= ~(CHV_BUFLEFTENA1_MASK | CHV_BUFRIGHTENA1_MASK);
                vlv_dpio_write(dev_priv, pipe, _CHV_CMN_DW5_CH0, val);
        } else {
                val = vlv_dpio_read(dev_priv, pipe, _CHV_CMN_DW1_CH1);
                val &= ~(CHV_BUFLEFTENA2_MASK | CHV_BUFRIGHTENA2_MASK);
                vlv_dpio_write(dev_priv, pipe, _CHV_CMN_DW1_CH1, val);
        }

        mutex_unlock(&dev_priv->dpio_lock);
}

void vlv_wait_port_ready(struct drm_i915_private *dev_priv,
                struct intel_digital_port *dport)
{
        u32 port_mask;
        int dpll_reg;

        switch (dport->port) {
        case PORT_B:
                port_mask = DPLL_PORTB_READY_MASK;
                dpll_reg = DPLL(0);
                break;
        case PORT_C:
                port_mask = DPLL_PORTC_READY_MASK;
                dpll_reg = DPLL(0);
                break;
        case PORT_D:
                port_mask = DPLL_PORTD_READY_MASK;
                dpll_reg = DPIO_PHY_STATUS;
                break;
        default:
                BUG();
        }

        if (wait_for((I915_READ(dpll_reg) & port_mask) == 0, 1000))
                WARN(1, "timed out waiting for port %c ready: 0x%08x\n",
                     port_name(dport->port), I915_READ(dpll_reg));
}

static void intel_prepare_shared_dpll(struct intel_crtc *crtc)
{
        struct drm_device *dev = crtc->base.dev;
        struct drm_i915_private *dev_priv = dev->dev_private;
        struct intel_shared_dpll *pll = intel_crtc_to_shared_dpll(crtc);

        if (WARN_ON(pll == NULL))
                return;

        WARN_ON(!pll->config.crtc_mask);
        if (pll->active == 0) {
                DRM_DEBUG_DRIVER("setting up %s\n", pll->name);
                WARN_ON(pll->on);
                assert_shared_dpll_disabled(dev_priv, pll);

                pll->mode_set(dev_priv, pll);
        }
}

/**
 * intel_enable_shared_dpll - enable PCH PLL
 * @dev_priv: i915 private structure
 * @pipe: pipe PLL to enable
 *
 * The PCH PLL needs to be enabled before the PCH transcoder, since it
 * drives the transcoder clock.
 */
static void intel_enable_shared_dpll(struct intel_crtc *crtc)
{
        struct drm_device *dev = crtc->base.dev;
        struct drm_i915_private *dev_priv = dev->dev_private;
        struct intel_shared_dpll *pll = intel_crtc_to_shared_dpll(crtc);

        if (WARN_ON(pll == NULL))
                return;

        if (WARN_ON(pll->config.crtc_mask == 0))
                return;

        DRM_DEBUG_KMS("enable %s (active %d, on? %d) for crtc %d\n",
                      pll->name, pll->active, pll->on,
                      crtc->base.base.id);

        if (pll->active++) {
                WARN_ON(!pll->on);
                assert_shared_dpll_enabled(dev_priv, pll);
                return;
        }
        WARN_ON(pll->on);

        intel_display_power_get(dev_priv, POWER_DOMAIN_PLLS);

        DRM_DEBUG_KMS("enabling %s\n", pll->name);
        pll->enable(dev_priv, pll);
        pll->on = true;
}

static void intel_disable_shared_dpll(struct intel_crtc *crtc)
{
        struct drm_device *dev = crtc->base.dev;
        struct drm_i915_private *dev_priv = dev->dev_private;
        struct intel_shared_dpll *pll = intel_crtc_to_shared_dpll(crtc);

        /* PCH only available on ILK+ */
        BUG_ON(INTEL_INFO(dev)->gen < 5);
        if (WARN_ON(pll == NULL))
               return;

        if (WARN_ON(pll->config.crtc_mask == 0))
                return;

        DRM_DEBUG_KMS("disable %s (active %d, on? %d) for crtc %d\n",
                      pll->name, pll->active, pll->on,
                      crtc->base.base.id);

        if (WARN_ON(pll->active == 0)) {
                assert_shared_dpll_disabled(dev_priv, pll);
                return;
        }

        assert_shared_dpll_enabled(dev_priv, pll);
        WARN_ON(!pll->on);
        if (--pll->active)
                return;

        DRM_DEBUG_KMS("disabling %s\n", pll->name);
        pll->disable(dev_priv, pll);
        pll->on = false;

        intel_display_power_put(dev_priv, POWER_DOMAIN_PLLS);
}

static void ironlake_enable_pch_transcoder(struct drm_i915_private *dev_priv,
                                           enum pipe pipe)
{
        struct drm_device *dev = dev_priv->dev;
        struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
        struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
        uint32_t reg, val, pipeconf_val;

        /* PCH only available on ILK+ */
        BUG_ON(!HAS_PCH_SPLIT(dev));

        /* Make sure PCH DPLL is enabled */
        assert_shared_dpll_enabled(dev_priv,
                                   intel_crtc_to_shared_dpll(intel_crtc));

        /* FDI must be feeding us bits for PCH ports */
        assert_fdi_tx_enabled(dev_priv, pipe);
        assert_fdi_rx_enabled(dev_priv, pipe);

        if (HAS_PCH_CPT(dev)) {
                /* Workaround: Set the timing override bit before enabling the
                 * pch transcoder. */
                reg = TRANS_CHICKEN2(pipe);
                val = I915_READ(reg);
                val |= TRANS_CHICKEN2_TIMING_OVERRIDE;
                I915_WRITE(reg, val);
        }

        reg = PCH_TRANSCONF(pipe);
        val = I915_READ(reg);
        pipeconf_val = I915_READ(PIPECONF(pipe));

        if (HAS_PCH_IBX(dev_priv->dev)) {
                /*
                 * make the BPC in transcoder be consistent with
                 * that in pipeconf reg.
                 */
                val &= ~PIPECONF_BPC_MASK;
                val |= pipeconf_val & PIPECONF_BPC_MASK;
        }

        val &= ~TRANS_INTERLACE_MASK;
        if ((pipeconf_val & PIPECONF_INTERLACE_MASK) == PIPECONF_INTERLACED_ILK)
                if (HAS_PCH_IBX(dev_priv->dev) &&
                    intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_SDVO))
                        val |= TRANS_LEGACY_INTERLACED_ILK;
                else
                        val |= TRANS_INTERLACED;
        else
                val |= TRANS_PROGRESSIVE;

        I915_WRITE(reg, val | TRANS_ENABLE);
        if (wait_for(I915_READ(reg) & TRANS_STATE_ENABLE, 100))
                DRM_ERROR("failed to enable transcoder %c\n", pipe_name(pipe));
}

static void lpt_enable_pch_transcoder(struct drm_i915_private *dev_priv,
                                      enum transcoder cpu_transcoder)
{
        u32 val, pipeconf_val;

        /* PCH only available on ILK+ */
        BUG_ON(!HAS_PCH_SPLIT(dev_priv->dev));

        /* FDI must be feeding us bits for PCH ports */
        assert_fdi_tx_enabled(dev_priv, (enum pipe) cpu_transcoder);
        assert_fdi_rx_enabled(dev_priv, TRANSCODER_A);

        /* Workaround: set timing override bit. */
        val = I915_READ(_TRANSA_CHICKEN2);
        val |= TRANS_CHICKEN2_TIMING_OVERRIDE;
        I915_WRITE(_TRANSA_CHICKEN2, val);

        val = TRANS_ENABLE;
        pipeconf_val = I915_READ(PIPECONF(cpu_transcoder));

        if ((pipeconf_val & PIPECONF_INTERLACE_MASK_HSW) ==
            PIPECONF_INTERLACED_ILK)
                val |= TRANS_INTERLACED;
        else
                val |= TRANS_PROGRESSIVE;

        I915_WRITE(LPT_TRANSCONF, val);
        if (wait_for(I915_READ(LPT_TRANSCONF) & TRANS_STATE_ENABLE, 100))
                DRM_ERROR("Failed to enable PCH transcoder\n");
}

static void ironlake_disable_pch_transcoder(struct drm_i915_private *dev_priv,
                                            enum pipe pipe)
{
        struct drm_device *dev = dev_priv->dev;
        uint32_t reg, val;

        /* FDI relies on the transcoder */
        assert_fdi_tx_disabled(dev_priv, pipe);
        assert_fdi_rx_disabled(dev_priv, pipe);

        /* Ports must be off as well */
        assert_pch_ports_disabled(dev_priv, pipe);

        reg = PCH_TRANSCONF(pipe);
        val = I915_READ(reg);
        val &= ~TRANS_ENABLE;
        I915_WRITE(reg, val);
        /* wait for PCH transcoder off, transcoder state */
        if (wait_for((I915_READ(reg) & TRANS_STATE_ENABLE) == 0, 50))
                DRM_ERROR("failed to disable transcoder %c\n", pipe_name(pipe));

        if (!HAS_PCH_IBX(dev)) {
                /* Workaround: Clear the timing override chicken bit again. */
                reg = TRANS_CHICKEN2(pipe);
                val = I915_READ(reg);
                val &= ~TRANS_CHICKEN2_TIMING_OVERRIDE;
                I915_WRITE(reg, val);
        }
}

static void lpt_disable_pch_transcoder(struct drm_i915_private *dev_priv)
{
        u32 val;

        val = I915_READ(LPT_TRANSCONF);
        val &= ~TRANS_ENABLE;
        I915_WRITE(LPT_TRANSCONF, val);
        /* wait for PCH transcoder off, transcoder state */
        if (wait_for((I915_READ(LPT_TRANSCONF) & TRANS_STATE_ENABLE) == 0, 50))
                DRM_ERROR("Failed to disable PCH transcoder\n");

        /* Workaround: clear timing override bit. */
        val = I915_READ(_TRANSA_CHICKEN2);
        val &= ~TRANS_CHICKEN2_TIMING_OVERRIDE;
        I915_WRITE(_TRANSA_CHICKEN2, val);
}

/**
 * intel_enable_pipe - enable a pipe, asserting requirements

 * @crtc: crtc responsible for the pipe
 *
 * Enable @crtc's pipe, making sure that various hardware specific requirements
 * are met, if applicable, e.g. PLL enabled, LVDS pairs enabled, etc.
 */
static void intel_enable_pipe(struct intel_crtc *crtc)
{
        struct drm_device *dev = crtc->base.dev;
        struct drm_i915_private *dev_priv = dev->dev_private;
        enum pipe pipe = crtc->pipe;
        enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
                                                                      pipe);
        enum pipe pch_transcoder;
        int reg;
        u32 val;

        assert_planes_disabled(dev_priv, pipe);
        assert_cursor_disabled(dev_priv, pipe);
        assert_sprites_disabled(dev_priv, pipe);

        if (HAS_PCH_LPT(dev_priv->dev))
                pch_transcoder = TRANSCODER_A;
        else
                pch_transcoder = pipe;

        /*
         * A pipe without a PLL won't actually be able to drive bits from
         * a plane.  On ILK+ the pipe PLLs are integrated, so we don't
         * need the check.
         */
        if (!HAS_PCH_SPLIT(dev_priv->dev))
                if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DSI))
                        assert_dsi_pll_enabled(dev_priv);
                else
                        assert_pll_enabled(dev_priv, pipe);
        else {
                if (crtc->config.has_pch_encoder) {
                        /* if driving the PCH, we need FDI enabled */
                        assert_fdi_rx_pll_enabled(dev_priv, pch_transcoder);
                        assert_fdi_tx_pll_enabled(dev_priv,
                                                  (enum pipe) cpu_transcoder);
                }
                /* FIXME: assert CPU port conditions for SNB+ */
        }

        reg = PIPECONF(cpu_transcoder);
        val = I915_READ(reg);
        if (val & PIPECONF_ENABLE) {
                WARN_ON(!((pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE) ||
                          (pipe == PIPE_B && dev_priv->quirks & QUIRK_PIPEB_FORCE)));
                return;
        }

        I915_WRITE(reg, val | PIPECONF_ENABLE);
        POSTING_READ(reg);
}

/**
 * intel_disable_pipe - disable a pipe, asserting requirements
 * @crtc: crtc whose pipes is to be disabled
 *
 * Disable the pipe of @crtc, making sure that various hardware
 * specific requirements are met, if applicable, e.g. plane
 * disabled, panel fitter off, etc.
 *
 * Will wait until the pipe has shut down before returning.
 */
static void intel_disable_pipe(struct intel_crtc *crtc)
{
        struct drm_i915_private *dev_priv = crtc->base.dev->dev_private;
        enum transcoder cpu_transcoder = crtc->config.cpu_transcoder;
        enum pipe pipe = crtc->pipe;
        int reg;
        u32 val;

        /*
         * Make sure planes won't keep trying to pump pixels to us,
         * or we might hang the display.
         */
        assert_planes_disabled(dev_priv, pipe);
        assert_cursor_disabled(dev_priv, pipe);
        assert_sprites_disabled(dev_priv, pipe);

        reg = PIPECONF(cpu_transcoder);
        val = I915_READ(reg);
        if ((val & PIPECONF_ENABLE) == 0)
                return;

        /*
         * Double wide has implications for planes
         * so best keep it disabled when not needed.
         */
        if (crtc->config.double_wide)
                val &= ~PIPECONF_DOUBLE_WIDE;

        /* Don't disable pipe or pipe PLLs if needed */
        if (!(pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE) &&
            !(pipe == PIPE_B && dev_priv->quirks & QUIRK_PIPEB_FORCE))
                val &= ~PIPECONF_ENABLE;

        I915_WRITE(reg, val);
        if ((val & PIPECONF_ENABLE) == 0)
                intel_wait_for_pipe_off(crtc);
}

/*
 * Plane regs are double buffered, going from enabled->disabled needs a
 * trigger in order to latch.  The display address reg provides this.
 */
void intel_flush_primary_plane(struct drm_i915_private *dev_priv,
                               enum plane plane)
{
        struct drm_device *dev = dev_priv->dev;
        u32 reg = INTEL_INFO(dev)->gen >= 4 ? DSPSURF(plane) : DSPADDR(plane);

        I915_WRITE(reg, I915_READ(reg));
        POSTING_READ(reg);
}

/**
 * intel_enable_primary_hw_plane - enable the primary plane on a given pipe
 * @plane:  plane to be enabled
 * @crtc: crtc for the plane
 *
 * Enable @plane on @crtc, making sure that the pipe is running first.
 */
static void intel_enable_primary_hw_plane(struct drm_plane *plane,
                                          struct drm_crtc *crtc)
{
        struct drm_device *dev = plane->dev;
        struct drm_i915_private *dev_priv = dev->dev_private;
        struct intel_crtc *intel_crtc = to_intel_crtc(crtc);

        /* If the pipe isn't enabled, we can't pump pixels and may hang */
        assert_pipe_enabled(dev_priv, intel_crtc->pipe);

        if (intel_crtc->primary_enabled)
                return;

        intel_crtc->primary_enabled = true;

        dev_priv->display.update_primary_plane(crtc, plane->fb,
                                               crtc->x, crtc->y);

        /*
         * BDW signals flip done immediately if the plane
         * is disabled, even if the plane enable is already
         * armed to occur at the next vblank :(
         */
        if (IS_BROADWELL(dev))
                intel_wait_for_vblank(dev, intel_crtc->pipe);
}

/**
 * intel_disable_primary_hw_plane - disable the primary hardware plane
 * @plane: plane to be disabled
 * @crtc: crtc for the plane
 *
 * Disable @plane on @crtc, making sure that the pipe is running first.
 */
static void intel_disable_primary_hw_plane(struct drm_plane *plane,
                                           struct drm_crtc *crtc)
{
        struct drm_device *dev = plane->dev;
        struct drm_i915_private *dev_priv = dev->dev_private;
        struct intel_crtc *intel_crtc = to_intel_crtc(crtc);

        assert_pipe_enabled(dev_priv, intel_crtc->pipe);

        if (!intel_crtc->primary_enabled)
                return;

        intel_crtc->primary_enabled = false;

        dev_priv->display.update_primary_plane(crtc, plane->fb,
                                               crtc->x, crtc->y);
}

static bool need_vtd_wa(struct drm_device *dev)
{
#ifdef CONFIG_INTEL_IOMMU
        if (INTEL_INFO(dev)->gen >= 6 && intel_iommu_gfx_mapped)
                return true;
#endif
        return false;
}

static int intel_align_height(struct drm_device *dev, int height, bool tiled)
{
        int tile_height;

        tile_height = tiled ? (IS_GEN2(dev) ? 16 : 8) : 1;
        return ALIGN(height, tile_height);
}

int
intel_pin_and_fence_fb_obj(struct drm_plane *plane,
                           struct drm_framebuffer *fb,
                           struct intel_engine_cs *pipelined)
{
        struct drm_device *dev = fb->dev;
        struct drm_i915_private *dev_priv = dev->dev_private;
        struct drm_i915_gem_object *obj = intel_fb_obj(fb);
        u32 alignment;
        int ret;

        WARN_ON(!mutex_is_locked(&dev->struct_mutex));

        switch (obj->tiling_mode) {
        case I915_TILING_NONE:
                if (INTEL_INFO(dev)->gen >= 9)
                        alignment = 256 * 1024;
                else if (IS_BROADWATER(dev) || IS_CRESTLINE(dev))
                        alignment = 128 * 1024;
                else if (INTEL_INFO(dev)->gen >= 4)
                        alignment = 4 * 1024;
                else
                        alignment = 64 * 1024;
                break;
        case I915_TILING_X:
                if (INTEL_INFO(dev)->gen >= 9)
                        alignment = 256 * 1024;
                else {
                        /* pin() will align the object as required by fence */
                        alignment = 0;
                }
                break;
        case I915_TILING_Y:
                WARN(1, "Y tiled bo slipped through, driver bug!\n");
                return -EINVAL;
        default:
                BUG();
        }

        /* Note that the w/a also requires 64 PTE of padding following the
         * bo. We currently fill all unused PTE with the shadow page and so
         * we should always have valid PTE following the scanout preventing
         * the VT-d warning.
         */
        if (need_vtd_wa(dev) && alignment < 256 * 1024)
                alignment = 256 * 1024;

        /*
         * Global gtt pte registers are special registers which actually forward
         * writes to a chunk of system memory. Which means that there is no risk
         * that the register values disappear as soon as we call
         * intel_runtime_pm_put(), so it is correct to wrap only the
         * pin/unpin/fence and not more.
         */
        intel_runtime_pm_get(dev_priv);

        dev_priv->mm.interruptible = false;
        ret = i915_gem_object_pin_to_display_plane(obj, alignment, pipelined);
        if (ret)
                goto err_interruptible;

        /* Install a fence for tiled scan-out. Pre-i965 always needs a
         * fence, whereas 965+ only requires a fence if using
         * framebuffer compression.  For simplicity, we always install
         * a fence as the cost is not that onerous.
         */
        ret = i915_gem_object_get_fence(obj);
        if (ret)
                goto err_unpin;

        i915_gem_object_pin_fence(obj);

        dev_priv->mm.interruptible = true;
        intel_runtime_pm_put(dev_priv);
        return 0;

err_unpin:
        i915_gem_object_unpin_from_display_plane(obj);
err_interruptible:
        dev_priv->mm.interruptible = true;
        intel_runtime_pm_put(dev_priv);
        return ret;
}

void intel_unpin_fb_obj(struct drm_i915_gem_object *obj)
{
        WARN_ON(!mutex_is_locked(&obj->base.dev->struct_mutex));

        i915_gem_object_unpin_fence(obj);
        i915_gem_object_unpin_from_display_plane(obj);
}

/* Computes the linear offset to the base tile and adjusts x, y. bytes per pixel
 * is assumed to be a power-of-two. */
unsigned long intel_gen4_compute_page_offset(int *x, int *y,
                                             unsigned int tiling_mode,
                                             unsigned int cpp,
                                             unsigned int pitch)
{
        if (tiling_mode != I915_TILING_NONE) {
                unsigned int tile_rows, tiles;

                tile_rows = *y / 8;
                *y %= 8;

                tiles = *x / (512/cpp);
                *x %= 512/cpp;

                return tile_rows * pitch * 8 + tiles * 4096;
        } else {
                unsigned int offset;

                offset = *y * pitch + *x * cpp;
                *y = 0;
                *x = (offset & 4095) / cpp;
                return offset & -4096;
        }
}

int intel_format_to_fourcc(int format)
{
        switch (format) {
        case DISPPLANE_8BPP:
                return DRM_FORMAT_C8;
        case DISPPLANE_BGRX555:
                return DRM_FORMAT_XRGB1555;
        case DISPPLANE_BGRX565:
                return DRM_FORMAT_RGB565;
        default:
        case DISPPLANE_BGRX888:
                return DRM_FORMAT_XRGB8888;
        case DISPPLANE_RGBX888:
                return DRM_FORMAT_XBGR8888;
        case DISPPLANE_BGRX101010:
                return DRM_FORMAT_XRGB2101010;
        case DISPPLANE_RGBX101010:
                return DRM_FORMAT_XBGR2101010;
        }
}

static bool intel_alloc_plane_obj(struct intel_crtc *crtc,
                                  struct intel_plane_config *plane_config)
{
        struct drm_device *dev = crtc->base.dev;
        struct drm_i915_gem_object *obj = NULL;
        struct drm_mode_fb_cmd2 mode_cmd = { 0 };
        u32 base = plane_config->base;

        if (plane_config->size == 0)
                return false;

        obj = i915_gem_object_create_stolen_for_preallocated(dev, base, base,
                                                             plane_config->size);
        if (!obj)
                return false;

        if (plane_config->tiled) {
                obj->tiling_mode = I915_TILING_X;
                obj->stride = crtc->base.primary->fb->pitches[0];
        }

        mode_cmd.pixel_format = crtc->base.primary->fb->pixel_format;
        mode_cmd.width = crtc->base.primary->fb->width;
        mode_cmd.height = crtc->base.primary->fb->height;
        mode_cmd.pitches[0] = crtc->base.primary->fb->pitches[0];

        mutex_lock(&dev->struct_mutex);

        if (intel_framebuffer_init(dev, to_intel_framebuffer(crtc->base.primary->fb),
                                   &mode_cmd, obj)) {
                DRM_DEBUG_KMS("intel fb init failed\n");
                goto out_unref_obj;
        }

        obj->frontbuffer_bits = INTEL_FRONTBUFFER_PRIMARY(crtc->pipe);
        mutex_unlock(&dev->struct_mutex);

        DRM_DEBUG_KMS("plane fb obj %p\n", obj);
        return true;

out_unref_obj:
        drm_gem_object_unreference(&obj->base);
        mutex_unlock(&dev->struct_mutex);
        return false;
}

static void intel_find_plane_obj(struct intel_crtc *intel_crtc,
                                 struct intel_plane_config *plane_config)
{
        struct drm_device *dev = intel_crtc->base.dev;
        struct drm_i915_private *dev_priv = dev->dev_private;
        struct drm_crtc *c;
        struct intel_crtc *i;
        struct drm_i915_gem_object *obj;

        if (!intel_crtc->base.primary->fb)
                return;

        if (intel_alloc_plane_obj(intel_crtc, plane_config))
                return;

        kfree(intel_crtc->base.primary->fb);
        intel_crtc->base.primary->fb = NULL;

        /*
         * Failed to alloc the obj, check to see if we should share
         * an fb with another CRTC instead
         */
        for_each_crtc(dev, c) {
                i = to_intel_crtc(c);

                if (c == &intel_crtc->base)
                        continue;

                if (!i->active)
                        continue;

                obj = intel_fb_obj(c->primary->fb);
                if (obj == NULL)
                        continue;

                if (i915_gem_obj_ggtt_offset(obj) == plane_config->base) {
                        if (obj->tiling_mode != I915_TILING_NONE)
                                dev_priv->preserve_bios_swizzle = true;

                        drm_framebuffer_reference(c->primary->fb);
                        intel_crtc->base.primary->fb = c->primary->fb;
                        obj->frontbuffer_bits |= INTEL_FRONTBUFFER_PRIMARY(intel_crtc->pipe);
                        break;
                }
        }
}

static void i9xx_update_primary_plane(struct drm_crtc *crtc,
                                      struct drm_framebuffer *fb,
                                      int x, int y)
{
        struct drm_device *dev = crtc->dev;
        struct drm_i915_private *dev_priv = dev->dev_private;
        struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
        struct drm_i915_gem_object *obj;
        int plane = intel_crtc->plane;
        unsigned long linear_offset;
        u32 dspcntr;
        u32 reg = DSPCNTR(plane);
        int pixel_size;

        if (!intel_crtc->primary_enabled) {
                I915_WRITE(reg, 0);
                if (INTEL_INFO(dev)->gen >= 4)
                        I915_WRITE(DSPSURF(plane), 0);
                else
                        I915_WRITE(DSPADDR(plane), 0);
                POSTING_READ(reg);
                return;
        }

        obj = intel_fb_obj(fb);
        if (WARN_ON(obj == NULL))
                return;

        pixel_size = drm_format_plane_cpp(fb->pixel_format, 0);

        dspcntr = DISPPLANE_GAMMA_ENABLE;

        dspcntr |= DISPLAY_PLANE_ENABLE;

        if (INTEL_INFO(dev)->gen < 4) {
                if (intel_crtc->pipe == PIPE_B)
                        dspcntr |= DISPPLANE_SEL_PIPE_B;

                /* pipesrc and dspsize control the size that is scaled from,
                 * which should always be the user's requested size.
                 */
                I915_WRITE(DSPSIZE(plane),
                           ((intel_crtc->config.pipe_src_h - 1) << 16) |
                           (intel_crtc->config.pipe_src_w - 1));
                I915_WRITE(DSPPOS(plane), 0);
        } else if (IS_CHERRYVIEW(dev) && plane == PLANE_B) {
                I915_WRITE(PRIMSIZE(plane),
                           ((intel_crtc->config.pipe_src_h - 1) << 16) |
                           (intel_crtc->config.pipe_src_w - 1));
                I915_WRITE(PRIMPOS(plane), 0);
                I915_WRITE(PRIMCNSTALPHA(plane), 0);
        }

        switch (fb->pixel_format) {
        case DRM_FORMAT_C8:
                dspcntr |= DISPPLANE_8BPP;
                break;
        case DRM_FORMAT_XRGB1555:
        case DRM_FORMAT_ARGB1555:
                dspcntr |= DISPPLANE_BGRX555;
                break;
        case DRM_FORMAT_RGB565:
                dspcntr |= DISPPLANE_BGRX565;
                break;
        case DRM_FORMAT_XRGB8888:
        case DRM_FORMAT_ARGB8888:
                dspcntr |= DISPPLANE_BGRX888;
                break;
        case DRM_FORMAT_XBGR8888:
        case DRM_FORMAT_ABGR8888:
                dspcntr |= DISPPLANE_RGBX888;
                break;
        case DRM_FORMAT_XRGB2101010:
        case DRM_FORMAT_ARGB2101010:
                dspcntr |= DISPPLANE_BGRX101010;
                break;
        case DRM_FORMAT_XBGR2101010:
        case DRM_FORMAT_ABGR2101010:
                dspcntr |= DISPPLANE_RGBX101010;
                break;
        default:
                BUG();
        }

        if (INTEL_INFO(dev)->gen >= 4 &&
            obj->tiling_mode != I915_TILING_NONE)
                dspcntr |= DISPPLANE_TILED;

        if (IS_G4X(dev))
                dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE;

        linear_offset = y * fb->pitches[0] + x * pixel_size;

        if (INTEL_INFO(dev)->gen >= 4) {
                intel_crtc->dspaddr_offset =
                        intel_gen4_compute_page_offset(&x, &y, obj->tiling_mode,
                                                       pixel_size,
                                                       fb->pitches[0]);
                linear_offset -= intel_crtc->dspaddr_offset;
        } else {
                intel_crtc->dspaddr_offset = linear_offset;
        }

        if (to_intel_plane(crtc->primary)->rotation == BIT(DRM_ROTATE_180)) {
                dspcntr |= DISPPLANE_ROTATE_180;

                x += (intel_crtc->config.pipe_src_w - 1);
                y += (intel_crtc->config.pipe_src_h - 1);

                /* Finding the last pixel of the last line of the display
                data and adding to linear_offset*/
                linear_offset +=
                        (intel_crtc->config.pipe_src_h - 1) * fb->pitches[0] +
                        (intel_crtc->config.pipe_src_w - 1) * pixel_size;
        }

        I915_WRITE(reg, dspcntr);

        DRM_DEBUG_KMS("Writing base %08lX %08lX %d %d %d\n",
                      i915_gem_obj_ggtt_offset(obj), linear_offset, x, y,
                      fb->pitches[0]);
        I915_WRITE(DSPSTRIDE(plane), fb->pitches[0]);
        if (INTEL_INFO(dev)->gen >= 4) {
                I915_WRITE(DSPSURF(plane),
                           i915_gem_obj_ggtt_offset(obj) + intel_crtc->dspaddr_offset);
                I915_WRITE(DSPTILEOFF(plane), (y << 16) | x);
                I915_WRITE(DSPLINOFF(plane), linear_offset);
        } else
                I915_WRITE(DSPADDR(plane), i915_gem_obj_ggtt_offset(obj) + linear_offset);
        POSTING_READ(reg);
}

static void ironlake_update_primary_plane(struct drm_crtc *crtc,
                                          struct drm_framebuffer *fb,
                                          int x, int y)
{
        struct drm_device *dev = crtc->dev;
        struct drm_i915_private *dev_priv = dev->dev_private;
        struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
        struct drm_i915_gem_object *obj;
        int plane = intel_crtc->plane;
        unsigned long linear_offset;
        u32 dspcntr;
        u32 reg = DSPCNTR(plane);
        int pixel_size;

        if (!intel_crtc->primary_enabled) {
                I915_WRITE(reg, 0);
                I915_WRITE(DSPSURF(plane), 0);
                POSTING_READ(reg);
                return;
        }

        obj = intel_fb_obj(fb);
        if (WARN_ON(obj == NULL))
                return;

        pixel_size = drm_format_plane_cpp(fb->pixel_format, 0);

        dspcntr = DISPPLANE_GAMMA_ENABLE;

        dspcntr |= DISPLAY_PLANE_ENABLE;

        if (IS_HASWELL(dev) || IS_BROADWELL(dev))
                dspcntr |= DISPPLANE_PIPE_CSC_ENABLE;

        switch (fb->pixel_format) {
        case DRM_FORMAT_C8:
                dspcntr |= DISPPLANE_8BPP;
                break;
        case DRM_FORMAT_RGB565:
                dspcntr |= DISPPLANE_BGRX565;
                break;
        case DRM_FORMAT_XRGB8888:
        case DRM_FORMAT_ARGB8888:
                dspcntr |= DISPPLANE_BGRX888;
                break;
        case DRM_FORMAT_XBGR8888:
        case DRM_FORMAT_ABGR8888:
                dspcntr |= DISPPLANE_RGBX888;
                break;
        case DRM_FORMAT_XRGB2101010:
        case DRM_FORMAT_ARGB2101010:
                dspcntr |= DISPPLANE_BGRX101010;
                break;
        case DRM_FORMAT_XBGR2101010:
        case DRM_FORMAT_ABGR2101010:
                dspcntr |= DISPPLANE_RGBX101010;
                break;
        default:
                BUG();
        }

        if (obj->tiling_mode != I915_TILING_NONE)
                dspcntr |= DISPPLANE_TILED;

        if (!IS_HASWELL(dev) && !IS_BROADWELL(dev))
                dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE;

        linear_offset = y * fb->pitches[0] + x * pixel_size;
        intel_crtc->dspaddr_offset =
                intel_gen4_compute_page_offset(&x, &y, obj->tiling_mode,
                                               pixel_size,
                                               fb->pitches[0]);
        linear_offset -= intel_crtc->dspaddr_offset;
        if (to_intel_plane(crtc->primary)->rotation == BIT(DRM_ROTATE_180)) {
                dspcntr |= DISPPLANE_ROTATE_180;

                if (!IS_HASWELL(dev) && !IS_BROADWELL(dev)) {
                        x += (intel_crtc->config.pipe_src_w - 1);
                        y += (intel_crtc->config.pipe_src_h - 1);

                        /* Finding the last pixel of the last line of the display
                        data and adding to linear_offset*/
                        linear_offset +=
                                (intel_crtc->config.pipe_src_h - 1) * fb->pitches[0] +
                                (intel_crtc->config.pipe_src_w - 1) * pixel_size;
                }
        }

        I915_WRITE(reg, dspcntr);

        DRM_DEBUG_KMS("Writing base %08lX %08lX %d %d %d\n",
                      i915_gem_obj_ggtt_offset(obj), linear_offset, x, y,
                      fb->pitches[0]);
        I915_WRITE(DSPSTRIDE(plane), fb->pitches[0]);
        I915_WRITE(DSPSURF(plane),
                   i915_gem_obj_ggtt_offset(obj) + intel_crtc->dspaddr_offset);
        if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
                I915_WRITE(DSPOFFSET(plane), (y << 16) | x);
        } else {
                I915_WRITE(DSPTILEOFF(plane), (y << 16) | x);
                I915_WRITE(DSPLINOFF(plane), linear_offset);
        }
        POSTING_READ(reg);
}

static void skylake_update_primary_plane(struct drm_crtc *crtc,
                                         struct drm_framebuffer *fb,
                                         int x, int y)
{
        struct drm_device *dev = crtc->dev;
        struct drm_i915_private *dev_priv = dev->dev_private;
        struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
        struct intel_framebuffer *intel_fb;
        struct drm_i915_gem_object *obj;
        int pipe = intel_crtc->pipe;
        u32 plane_ctl, stride;

        if (!intel_crtc->primary_enabled) {
                I915_WRITE(PLANE_CTL(pipe, 0), 0);
                I915_WRITE(PLANE_SURF(pipe, 0), 0);
                POSTING_READ(PLANE_CTL(pipe, 0));
                return;
        }

        plane_ctl = PLANE_CTL_ENABLE |
                    PLANE_CTL_PIPE_GAMMA_ENABLE |
                    PLANE_CTL_PIPE_CSC_ENABLE;

        switch (fb->pixel_format) {
        case DRM_FORMAT_RGB565:
                plane_ctl |= PLANE_CTL_FORMAT_RGB_565;
                break;
        case DRM_FORMAT_XRGB8888:
                plane_ctl |= PLANE_CTL_FORMAT_XRGB_8888;
                break;
        case DRM_FORMAT_XBGR8888:
                plane_ctl |= PLANE_CTL_ORDER_RGBX;
                plane_ctl |= PLANE_CTL_FORMAT_XRGB_8888;
                break;
        case DRM_FORMAT_XRGB2101010:
                plane_ctl |= PLANE_CTL_FORMAT_XRGB_2101010;
                break;
        case DRM_FORMAT_XBGR2101010:
                plane_ctl |= PLANE_CTL_ORDER_RGBX;
                plane_ctl |= PLANE_CTL_FORMAT_XRGB_2101010;
                break;
        default:
                BUG();
        }

        intel_fb = to_intel_framebuffer(fb);
        obj = intel_fb->obj;

        /*
         * The stride is either expressed as a multiple of 64 bytes chunks for
         * linear buffers or in number of tiles for tiled buffers.
         */
        switch (obj->tiling_mode) {
        case I915_TILING_NONE:
                stride = fb->pitches[0] >> 6;
                break;
        case I915_TILING_X:
                plane_ctl |= PLANE_CTL_TILED_X;
                stride = fb->pitches[0] >> 9;
                break;
        default:
                BUG();
        }

        plane_ctl |= PLANE_CTL_PLANE_GAMMA_DISABLE;
        if (to_intel_plane(crtc->primary)->rotation == BIT(DRM_ROTATE_180))
                plane_ctl |= PLANE_CTL_ROTATE_180;

        I915_WRITE(PLANE_CTL(pipe, 0), plane_ctl);

        DRM_DEBUG_KMS("Writing base %08lX %d,%d,%d,%d pitch=%d\n",
                      i915_gem_obj_ggtt_offset(obj),
                      x, y, fb->width, fb->height,
                      fb->pitches[0]);

        I915_WRITE(PLANE_POS(pipe, 0), 0);
        I915_WRITE(PLANE_OFFSET(pipe, 0), (y << 16) | x);
        I915_WRITE(PLANE_SIZE(pipe, 0),
                   (intel_crtc->config.pipe_src_h - 1) << 16 |
                   (intel_crtc->config.pipe_src_w - 1));
        I915_WRITE(PLANE_STRIDE(pipe, 0), stride);
        I915_WRITE(PLANE_SURF(pipe, 0), i915_gem_obj_ggtt_offset(obj));

        POSTING_READ(PLANE_SURF(pipe, 0));
}

/* Assume fb object is pinned & idle & fenced and just update base pointers */
static int
intel_pipe_set_base_atomic(struct drm_crtc *crtc, struct drm_framebuffer *fb,
                           int x, int y, enum mode_set_atomic state)
{
        struct drm_device *dev = crtc->dev;
        struct drm_i915_private *dev_priv = dev->dev_private;

        if (dev_priv->display.disable_fbc)
                dev_priv->display.disable_fbc(dev);

        dev_priv->display.update_primary_plane(crtc, fb, x, y);

        return 0;
}

static void intel_complete_page_flips(struct drm_device *dev)
{
        struct drm_crtc *crtc;

        for_each_crtc(dev, crtc) {
                struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
                enum plane plane = intel_crtc->plane;

                intel_prepare_page_flip(dev, plane);
                intel_finish_page_flip_plane(dev, plane);
        }
}

static void intel_update_primary_planes(struct drm_device *dev)
{
        struct drm_i915_private *dev_priv = dev->dev_private;
        struct drm_crtc *crtc;

        for_each_crtc(dev, crtc) {
                struct intel_crtc *intel_crtc = to_intel_crtc(crtc);

                drm_modeset_lock(&crtc->mutex, NULL);
                /*
                 * FIXME: Once we have proper support for primary planes (and
                 * disabling them without disabling the entire crtc) allow again
                 * a NULL crtc->primary->fb.
                 */
                if (intel_crtc->active && crtc->primary->fb)
                        dev_priv->display.update_primary_plane(crtc,
                                                               crtc->primary->fb,
                                                               crtc->x,
                                                               crtc->y);
                drm_modeset_unlock(&crtc->mutex);
        }
}

void intel_prepare_reset(struct drm_device *dev)
{
        struct drm_i915_private *dev_priv = to_i915(dev);
        struct intel_crtc *crtc;

        /* no reset support for gen2 */
        if (IS_GEN2(dev))
                return;

        /* reset doesn't touch the display */
        if (INTEL_INFO(dev)->gen >= 5 || IS_G4X(dev))
                return;

        drm_modeset_lock_all(dev);

        /*
         * Disabling the crtcs gracefully seems nicer. Also the
         * g33 docs say we should at least disable all the planes.
         */
        for_each_intel_crtc(dev, crtc) {
                if (crtc->active)
                        dev_priv->display.crtc_disable(&crtc->base);
        }
}

void intel_finish_reset(struct drm_device *dev)
{
        struct drm_i915_private *dev_priv = to_i915(dev);

        /*
         * Flips in the rings will be nuked by the reset,
         * so complete all pending flips so that user space
         * will get its events and not get stuck.
         */
        intel_complete_page_flips(dev);

        /* no reset support for gen2 */
        if (IS_GEN2(dev))
                return;

        /* reset doesn't touch the display */
        if (INTEL_INFO(dev)->gen >= 5 || IS_G4X(dev)) {
                /*
                 * Flips in the rings have been nuked by the reset,
                 * so update the base address of all primary
                 * planes to the the last fb to make sure we're
                 * showing the correct fb after a reset.
                 */
                intel_update_primary_planes(dev);
                return;
        }

        /*
         * The display has been reset as well,
         * so need a full re-initialization.
         */
        intel_runtime_pm_disable_interrupts(dev_priv);
        intel_runtime_pm_enable_interrupts(dev_priv);

        intel_modeset_init_hw(dev);

        spin_lock_irq(&dev_priv->irq_lock);
        if (dev_priv->display.hpd_irq_setup)
                dev_priv->display.hpd_irq_setup(dev);
        spin_unlock_irq(&dev_priv->irq_lock);

        intel_modeset_setup_hw_state(dev, true);

        intel_hpd_init(dev_priv);

        drm_modeset_unlock_all(dev);
}

static int
intel_finish_fb(struct drm_framebuffer *old_fb)
{
        struct drm_i915_gem_object *obj = intel_fb_obj(old_fb);
        struct drm_i915_private *dev_priv = obj->base.dev->dev_private;
        bool was_interruptible = dev_priv->mm.interruptible;
        int ret;

        /* Big Hammer, we also need to ensure that any pending
         * MI_WAIT_FOR_EVENT inside a user batch buffer on the
         * current scanout is retired before unpinning the old
         * framebuffer.
         *
         * This should only fail upon a hung GPU, in which case we
         * can safely continue.
         */
        dev_priv->mm.interruptible = false;
        ret = i915_gem_object_finish_gpu(obj);
        dev_priv->mm.interruptible = was_interruptible;

        return ret;
}

static bool intel_crtc_has_pending_flip(struct drm_crtc *crtc)
{
        struct drm_device *dev = crtc->dev;
        struct drm_i915_private *dev_priv = dev->dev_private;
        struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
        bool pending;

        if (i915_reset_in_progress(&dev_priv->gpu_error) ||
            intel_crtc->reset_counter != atomic_read(&dev_priv->gpu_error.reset_counter))
                return false;

        spin_lock_irq(&dev->event_lock);
        pending = to_intel_crtc(crtc)->unpin_work != NULL;
        spin_unlock_irq(&dev->event_lock);

        return pending;
}

static void intel_update_pipe_size(struct intel_crtc *crtc)
{
        struct drm_device *dev = crtc->base.dev;
        struct drm_i915_private *dev_priv = dev->dev_private;
        const struct drm_display_mode *adjusted_mode;

        if (!i915.fastboot)
                return;

        /*
         * Update pipe size and adjust fitter if needed: the reason for this is
         * that in compute_mode_changes we check the native mode (not the pfit
         * mode) to see if we can flip rather than do a full mode set. In the
         * fastboot case, we'll flip, but if we don't update the pipesrc and
         * pfit state, we'll end up with a big fb scanned out into the wrong
         * sized surface.
         *
         * To fix this properly, we need to hoist the checks up into
         * compute_mode_changes (or above), check the actual pfit state and
         * whether the platform allows pfit disable with pipe active, and only
         * then update the pipesrc and pfit state, even on the flip path.
         */

        adjusted_mode = &crtc->config.adjusted_mode;

        I915_WRITE(PIPESRC(crtc->pipe),
                   ((adjusted_mode->crtc_hdisplay - 1) << 16) |
                   (adjusted_mode->crtc_vdisplay - 1));
        if (!crtc->config.pch_pfit.enabled &&
            (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) ||
             intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))) {
                I915_WRITE(PF_CTL(crtc->pipe), 0);
                I915_WRITE(PF_WIN_POS(crtc->pipe), 0);
                I915_WRITE(PF_WIN_SZ(crtc->pipe), 0);
        }
        crtc->config.pipe_src_w = adjusted_mode->crtc_hdisplay;
        crtc->config.pipe_src_h = adjusted_mode->crtc_vdisplay;
}

static int
intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
                    struct drm_framebuffer *fb)
{
        struct drm_device *dev = crtc->dev;
        struct drm_i915_private *dev_priv = dev->dev_private;
        struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
        enum pipe pipe = intel_crtc->pipe;
        struct drm_framebuffer *old_fb = crtc->primary->fb;
        struct drm_i915_gem_object *old_obj = intel_fb_obj(old_fb);
        int ret;

        if (intel_crtc_has_pending_flip(crtc)) {
                DRM_ERROR("pipe is still busy with an old pageflip\n");
                return -EBUSY;
        }

        /* no fb bound */
        if (!fb) {
                DRM_ERROR("No FB bound\n");
                return 0;
        }

        if (intel_crtc->plane > INTEL_INFO(dev)->num_pipes) {
                DRM_ERROR("no plane for crtc: plane %c, num_pipes %d\n",
                          plane_name(intel_crtc->plane),
                          INTEL_INFO(dev)->num_pipes);
                return -EINVAL;
        }

        mutex_lock(&dev->struct_mutex);
        ret = intel_pin_and_fence_fb_obj(crtc->primary, fb, NULL);
        if (ret == 0)
                i915_gem_track_fb(old_obj, intel_fb_obj(fb),
                                  INTEL_FRONTBUFFER_PRIMARY(pipe));
        mutex_unlock(&dev->struct_mutex);
        if (ret != 0) {
                DRM_ERROR("pin & fence failed\n");
                return ret;
        }

        dev_priv->display.update_primary_plane(crtc, fb, x, y);

        if (intel_crtc->active)