linux/drivers/net/usb/smsc75xx.c
<<
>>
Prefs
   1 /***************************************************************************
   2 *
   3 * Copyright (C) 2007-2010 SMSC
   4 *
   5 * This program is free software; you can redistribute it and/or
   6 * modify it under the terms of the GNU General Public License
   7 * as published by the Free Software Foundation; either version 2
   8 * of the License, or (at your option) any later version.
   9 *
  10 * This program is distributed in the hope that it will be useful,
  11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
  12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  13 * GNU General Public License for more details.
  14 *
  15 * You should have received a copy of the GNU General Public License
  16 * along with this program; if not, write to the Free Software
  17 * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
  18 *
  19 *****************************************************************************/
  20
  21#include <linux/module.h>
  22#include <linux/kmod.h>
  23#include <linux/init.h>
  24#include <linux/netdevice.h>
  25#include <linux/etherdevice.h>
  26#include <linux/ethtool.h>
  27#include <linux/mii.h>
  28#include <linux/usb.h>
  29#include <linux/crc32.h>
  30#include <linux/usb/usbnet.h>
  31#include <linux/slab.h>
  32#include "smsc75xx.h"
  33
  34#define SMSC_CHIPNAME                   "smsc75xx"
  35#define SMSC_DRIVER_VERSION             "1.0.0"
  36#define HS_USB_PKT_SIZE                 (512)
  37#define FS_USB_PKT_SIZE                 (64)
  38#define DEFAULT_HS_BURST_CAP_SIZE       (16 * 1024 + 5 * HS_USB_PKT_SIZE)
  39#define DEFAULT_FS_BURST_CAP_SIZE       (6 * 1024 + 33 * FS_USB_PKT_SIZE)
  40#define DEFAULT_BULK_IN_DELAY           (0x00002000)
  41#define MAX_SINGLE_PACKET_SIZE          (9000)
  42#define LAN75XX_EEPROM_MAGIC            (0x7500)
  43#define EEPROM_MAC_OFFSET               (0x01)
  44#define DEFAULT_TX_CSUM_ENABLE          (true)
  45#define DEFAULT_RX_CSUM_ENABLE          (true)
  46#define DEFAULT_TSO_ENABLE              (true)
  47#define SMSC75XX_INTERNAL_PHY_ID        (1)
  48#define SMSC75XX_TX_OVERHEAD            (8)
  49#define MAX_RX_FIFO_SIZE                (20 * 1024)
  50#define MAX_TX_FIFO_SIZE                (12 * 1024)
  51#define USB_VENDOR_ID_SMSC              (0x0424)
  52#define USB_PRODUCT_ID_LAN7500          (0x7500)
  53#define USB_PRODUCT_ID_LAN7505          (0x7505)
  54#define RXW_PADDING                     2
  55
  56#define check_warn(ret, fmt, args...) \
  57        ({ if (ret < 0) netdev_warn(dev->net, fmt, ##args); })
  58
  59#define check_warn_return(ret, fmt, args...) \
  60        ({ if (ret < 0) { netdev_warn(dev->net, fmt, ##args); return ret; } })
  61
  62#define check_warn_goto_done(ret, fmt, args...) \
  63        ({ if (ret < 0) { netdev_warn(dev->net, fmt, ##args); goto done; } })
  64
  65struct smsc75xx_priv {
  66        struct usbnet *dev;
  67        u32 rfe_ctl;
  68        u32 multicast_hash_table[DP_SEL_VHF_HASH_LEN];
  69        struct mutex dataport_mutex;
  70        spinlock_t rfe_ctl_lock;
  71        struct work_struct set_multicast;
  72};
  73
  74struct usb_context {
  75        struct usb_ctrlrequest req;
  76        struct usbnet *dev;
  77};
  78
  79static int turbo_mode = true;
  80module_param(turbo_mode, bool, 0644);
  81MODULE_PARM_DESC(turbo_mode, "Enable multiple frames per Rx transaction");
  82
  83static int __must_check smsc75xx_read_reg(struct usbnet *dev, u32 index,
  84                                          u32 *data)
  85{
  86        u32 *buf = kmalloc(4, GFP_KERNEL);
  87        int ret;
  88
  89        BUG_ON(!dev);
  90
  91        if (!buf)
  92                return -ENOMEM;
  93
  94        ret = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0),
  95                USB_VENDOR_REQUEST_READ_REGISTER,
  96                USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
  97                00, index, buf, 4, USB_CTRL_GET_TIMEOUT);
  98
  99        if (unlikely(ret < 0))
 100                netdev_warn(dev->net,
 101                        "Failed to read register index 0x%08x", index);
 102
 103        le32_to_cpus(buf);
 104        *data = *buf;
 105        kfree(buf);
 106
 107        return ret;
 108}
 109
 110static int __must_check smsc75xx_write_reg(struct usbnet *dev, u32 index,
 111                                           u32 data)
 112{
 113        u32 *buf = kmalloc(4, GFP_KERNEL);
 114        int ret;
 115
 116        BUG_ON(!dev);
 117
 118        if (!buf)
 119                return -ENOMEM;
 120
 121        *buf = data;
 122        cpu_to_le32s(buf);
 123
 124        ret = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0),
 125                USB_VENDOR_REQUEST_WRITE_REGISTER,
 126                USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 127                00, index, buf, 4, USB_CTRL_SET_TIMEOUT);
 128
 129        if (unlikely(ret < 0))
 130                netdev_warn(dev->net,
 131                        "Failed to write register index 0x%08x", index);
 132
 133        kfree(buf);
 134
 135        return ret;
 136}
 137
 138/* Loop until the read is completed with timeout
 139 * called with phy_mutex held */
 140static int smsc75xx_phy_wait_not_busy(struct usbnet *dev)
 141{
 142        unsigned long start_time = jiffies;
 143        u32 val;
 144        int ret;
 145
 146        do {
 147                ret = smsc75xx_read_reg(dev, MII_ACCESS, &val);
 148                check_warn_return(ret, "Error reading MII_ACCESS");
 149
 150                if (!(val & MII_ACCESS_BUSY))
 151                        return 0;
 152        } while (!time_after(jiffies, start_time + HZ));
 153
 154        return -EIO;
 155}
 156
 157static int smsc75xx_mdio_read(struct net_device *netdev, int phy_id, int idx)
 158{
 159        struct usbnet *dev = netdev_priv(netdev);
 160        u32 val, addr;
 161        int ret;
 162
 163        mutex_lock(&dev->phy_mutex);
 164
 165        /* confirm MII not busy */
 166        ret = smsc75xx_phy_wait_not_busy(dev);
 167        check_warn_goto_done(ret, "MII is busy in smsc75xx_mdio_read");
 168
 169        /* set the address, index & direction (read from PHY) */
 170        phy_id &= dev->mii.phy_id_mask;
 171        idx &= dev->mii.reg_num_mask;
 172        addr = ((phy_id << MII_ACCESS_PHY_ADDR_SHIFT) & MII_ACCESS_PHY_ADDR)
 173                | ((idx << MII_ACCESS_REG_ADDR_SHIFT) & MII_ACCESS_REG_ADDR)
 174                | MII_ACCESS_READ;
 175        ret = smsc75xx_write_reg(dev, MII_ACCESS, addr);
 176        check_warn_goto_done(ret, "Error writing MII_ACCESS");
 177
 178        ret = smsc75xx_phy_wait_not_busy(dev);
 179        check_warn_goto_done(ret, "Timed out reading MII reg %02X", idx);
 180
 181        ret = smsc75xx_read_reg(dev, MII_DATA, &val);
 182        check_warn_goto_done(ret, "Error reading MII_DATA");
 183
 184        ret = (u16)(val & 0xFFFF);
 185
 186done:
 187        mutex_unlock(&dev->phy_mutex);
 188        return ret;
 189}
 190
 191static void smsc75xx_mdio_write(struct net_device *netdev, int phy_id, int idx,
 192                                int regval)
 193{
 194        struct usbnet *dev = netdev_priv(netdev);
 195        u32 val, addr;
 196        int ret;
 197
 198        mutex_lock(&dev->phy_mutex);
 199
 200        /* confirm MII not busy */
 201        ret = smsc75xx_phy_wait_not_busy(dev);
 202        check_warn_goto_done(ret, "MII is busy in smsc75xx_mdio_write");
 203
 204        val = regval;
 205        ret = smsc75xx_write_reg(dev, MII_DATA, val);
 206        check_warn_goto_done(ret, "Error writing MII_DATA");
 207
 208        /* set the address, index & direction (write to PHY) */
 209        phy_id &= dev->mii.phy_id_mask;
 210        idx &= dev->mii.reg_num_mask;
 211        addr = ((phy_id << MII_ACCESS_PHY_ADDR_SHIFT) & MII_ACCESS_PHY_ADDR)
 212                | ((idx << MII_ACCESS_REG_ADDR_SHIFT) & MII_ACCESS_REG_ADDR)
 213                | MII_ACCESS_WRITE;
 214        ret = smsc75xx_write_reg(dev, MII_ACCESS, addr);
 215        check_warn_goto_done(ret, "Error writing MII_ACCESS");
 216
 217        ret = smsc75xx_phy_wait_not_busy(dev);
 218        check_warn_goto_done(ret, "Timed out writing MII reg %02X", idx);
 219
 220done:
 221        mutex_unlock(&dev->phy_mutex);
 222}
 223
 224static int smsc75xx_wait_eeprom(struct usbnet *dev)
 225{
 226        unsigned long start_time = jiffies;
 227        u32 val;
 228        int ret;
 229
 230        do {
 231                ret = smsc75xx_read_reg(dev, E2P_CMD, &val);
 232                check_warn_return(ret, "Error reading E2P_CMD");
 233
 234                if (!(val & E2P_CMD_BUSY) || (val & E2P_CMD_TIMEOUT))
 235                        break;
 236                udelay(40);
 237        } while (!time_after(jiffies, start_time + HZ));
 238
 239        if (val & (E2P_CMD_TIMEOUT | E2P_CMD_BUSY)) {
 240                netdev_warn(dev->net, "EEPROM read operation timeout");
 241                return -EIO;
 242        }
 243
 244        return 0;
 245}
 246
 247static int smsc75xx_eeprom_confirm_not_busy(struct usbnet *dev)
 248{
 249        unsigned long start_time = jiffies;
 250        u32 val;
 251        int ret;
 252
 253        do {
 254                ret = smsc75xx_read_reg(dev, E2P_CMD, &val);
 255                check_warn_return(ret, "Error reading E2P_CMD");
 256
 257                if (!(val & E2P_CMD_BUSY))
 258                        return 0;
 259
 260                udelay(40);
 261        } while (!time_after(jiffies, start_time + HZ));
 262
 263        netdev_warn(dev->net, "EEPROM is busy");
 264        return -EIO;
 265}
 266
 267static int smsc75xx_read_eeprom(struct usbnet *dev, u32 offset, u32 length,
 268                                u8 *data)
 269{
 270        u32 val;
 271        int i, ret;
 272
 273        BUG_ON(!dev);
 274        BUG_ON(!data);
 275
 276        ret = smsc75xx_eeprom_confirm_not_busy(dev);
 277        if (ret)
 278                return ret;
 279
 280        for (i = 0; i < length; i++) {
 281                val = E2P_CMD_BUSY | E2P_CMD_READ | (offset & E2P_CMD_ADDR);
 282                ret = smsc75xx_write_reg(dev, E2P_CMD, val);
 283                check_warn_return(ret, "Error writing E2P_CMD");
 284
 285                ret = smsc75xx_wait_eeprom(dev);
 286                if (ret < 0)
 287                        return ret;
 288
 289                ret = smsc75xx_read_reg(dev, E2P_DATA, &val);
 290                check_warn_return(ret, "Error reading E2P_DATA");
 291
 292                data[i] = val & 0xFF;
 293                offset++;
 294        }
 295
 296        return 0;
 297}
 298
 299static int smsc75xx_write_eeprom(struct usbnet *dev, u32 offset, u32 length,
 300                                 u8 *data)
 301{
 302        u32 val;
 303        int i, ret;
 304
 305        BUG_ON(!dev);
 306        BUG_ON(!data);
 307
 308        ret = smsc75xx_eeprom_confirm_not_busy(dev);
 309        if (ret)
 310                return ret;
 311
 312        /* Issue write/erase enable command */
 313        val = E2P_CMD_BUSY | E2P_CMD_EWEN;
 314        ret = smsc75xx_write_reg(dev, E2P_CMD, val);
 315        check_warn_return(ret, "Error writing E2P_CMD");
 316
 317        ret = smsc75xx_wait_eeprom(dev);
 318        if (ret < 0)
 319                return ret;
 320
 321        for (i = 0; i < length; i++) {
 322
 323                /* Fill data register */
 324                val = data[i];
 325                ret = smsc75xx_write_reg(dev, E2P_DATA, val);
 326                check_warn_return(ret, "Error writing E2P_DATA");
 327
 328                /* Send "write" command */
 329                val = E2P_CMD_BUSY | E2P_CMD_WRITE | (offset & E2P_CMD_ADDR);
 330                ret = smsc75xx_write_reg(dev, E2P_CMD, val);
 331                check_warn_return(ret, "Error writing E2P_CMD");
 332
 333                ret = smsc75xx_wait_eeprom(dev);
 334                if (ret < 0)
 335                        return ret;
 336
 337                offset++;
 338        }
 339
 340        return 0;
 341}
 342
 343static int smsc75xx_dataport_wait_not_busy(struct usbnet *dev)
 344{
 345        int i, ret;
 346
 347        for (i = 0; i < 100; i++) {
 348                u32 dp_sel;
 349                ret = smsc75xx_read_reg(dev, DP_SEL, &dp_sel);
 350                check_warn_return(ret, "Error reading DP_SEL");
 351
 352                if (dp_sel & DP_SEL_DPRDY)
 353                        return 0;
 354
 355                udelay(40);
 356        }
 357
 358        netdev_warn(dev->net, "smsc75xx_dataport_wait_not_busy timed out");
 359
 360        return -EIO;
 361}
 362
 363static int smsc75xx_dataport_write(struct usbnet *dev, u32 ram_select, u32 addr,
 364                                   u32 length, u32 *buf)
 365{
 366        struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
 367        u32 dp_sel;
 368        int i, ret;
 369
 370        mutex_lock(&pdata->dataport_mutex);
 371
 372        ret = smsc75xx_dataport_wait_not_busy(dev);
 373        check_warn_goto_done(ret, "smsc75xx_dataport_write busy on entry");
 374
 375        ret = smsc75xx_read_reg(dev, DP_SEL, &dp_sel);
 376        check_warn_goto_done(ret, "Error reading DP_SEL");
 377
 378        dp_sel &= ~DP_SEL_RSEL;
 379        dp_sel |= ram_select;
 380        ret = smsc75xx_write_reg(dev, DP_SEL, dp_sel);
 381        check_warn_goto_done(ret, "Error writing DP_SEL");
 382
 383        for (i = 0; i < length; i++) {
 384                ret = smsc75xx_write_reg(dev, DP_ADDR, addr + i);
 385                check_warn_goto_done(ret, "Error writing DP_ADDR");
 386
 387                ret = smsc75xx_write_reg(dev, DP_DATA, buf[i]);
 388                check_warn_goto_done(ret, "Error writing DP_DATA");
 389
 390                ret = smsc75xx_write_reg(dev, DP_CMD, DP_CMD_WRITE);
 391                check_warn_goto_done(ret, "Error writing DP_CMD");
 392
 393                ret = smsc75xx_dataport_wait_not_busy(dev);
 394                check_warn_goto_done(ret, "smsc75xx_dataport_write timeout");
 395        }
 396
 397done:
 398        mutex_unlock(&pdata->dataport_mutex);
 399        return ret;
 400}
 401
 402/* returns hash bit number for given MAC address */
 403static u32 smsc75xx_hash(char addr[ETH_ALEN])
 404{
 405        return (ether_crc(ETH_ALEN, addr) >> 23) & 0x1ff;
 406}
 407
 408static void smsc75xx_deferred_multicast_write(struct work_struct *param)
 409{
 410        struct smsc75xx_priv *pdata =
 411                container_of(param, struct smsc75xx_priv, set_multicast);
 412        struct usbnet *dev = pdata->dev;
 413        int ret;
 414
 415        netif_dbg(dev, drv, dev->net, "deferred multicast write 0x%08x",
 416                pdata->rfe_ctl);
 417
 418        smsc75xx_dataport_write(dev, DP_SEL_VHF, DP_SEL_VHF_VLAN_LEN,
 419                DP_SEL_VHF_HASH_LEN, pdata->multicast_hash_table);
 420
 421        ret = smsc75xx_write_reg(dev, RFE_CTL, pdata->rfe_ctl);
 422        check_warn(ret, "Error writing RFE_CRL");
 423}
 424
 425static void smsc75xx_set_multicast(struct net_device *netdev)
 426{
 427        struct usbnet *dev = netdev_priv(netdev);
 428        struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
 429        unsigned long flags;
 430        int i;
 431
 432        spin_lock_irqsave(&pdata->rfe_ctl_lock, flags);
 433
 434        pdata->rfe_ctl &=
 435                ~(RFE_CTL_AU | RFE_CTL_AM | RFE_CTL_DPF | RFE_CTL_MHF);
 436        pdata->rfe_ctl |= RFE_CTL_AB;
 437
 438        for (i = 0; i < DP_SEL_VHF_HASH_LEN; i++)
 439                pdata->multicast_hash_table[i] = 0;
 440
 441        if (dev->net->flags & IFF_PROMISC) {
 442                netif_dbg(dev, drv, dev->net, "promiscuous mode enabled");
 443                pdata->rfe_ctl |= RFE_CTL_AM | RFE_CTL_AU;
 444        } else if (dev->net->flags & IFF_ALLMULTI) {
 445                netif_dbg(dev, drv, dev->net, "receive all multicast enabled");
 446                pdata->rfe_ctl |= RFE_CTL_AM | RFE_CTL_DPF;
 447        } else if (!netdev_mc_empty(dev->net)) {
 448                struct netdev_hw_addr *ha;
 449
 450                netif_dbg(dev, drv, dev->net, "receive multicast hash filter");
 451
 452                pdata->rfe_ctl |= RFE_CTL_MHF | RFE_CTL_DPF;
 453
 454                netdev_for_each_mc_addr(ha, netdev) {
 455                        u32 bitnum = smsc75xx_hash(ha->addr);
 456                        pdata->multicast_hash_table[bitnum / 32] |=
 457                                (1 << (bitnum % 32));
 458                }
 459        } else {
 460                netif_dbg(dev, drv, dev->net, "receive own packets only");
 461                pdata->rfe_ctl |= RFE_CTL_DPF;
 462        }
 463
 464        spin_unlock_irqrestore(&pdata->rfe_ctl_lock, flags);
 465
 466        /* defer register writes to a sleepable context */
 467        schedule_work(&pdata->set_multicast);
 468}
 469
 470static int smsc75xx_update_flowcontrol(struct usbnet *dev, u8 duplex,
 471                                            u16 lcladv, u16 rmtadv)
 472{
 473        u32 flow = 0, fct_flow = 0;
 474        int ret;
 475
 476        if (duplex == DUPLEX_FULL) {
 477                u8 cap = mii_resolve_flowctrl_fdx(lcladv, rmtadv);
 478
 479                if (cap & FLOW_CTRL_TX) {
 480                        flow = (FLOW_TX_FCEN | 0xFFFF);
 481                        /* set fct_flow thresholds to 20% and 80% */
 482                        fct_flow = (8 << 8) | 32;
 483                }
 484
 485                if (cap & FLOW_CTRL_RX)
 486                        flow |= FLOW_RX_FCEN;
 487
 488                netif_dbg(dev, link, dev->net, "rx pause %s, tx pause %s",
 489                        (cap & FLOW_CTRL_RX ? "enabled" : "disabled"),
 490                        (cap & FLOW_CTRL_TX ? "enabled" : "disabled"));
 491        } else {
 492                netif_dbg(dev, link, dev->net, "half duplex");
 493        }
 494
 495        ret = smsc75xx_write_reg(dev, FLOW, flow);
 496        check_warn_return(ret, "Error writing FLOW");
 497
 498        ret = smsc75xx_write_reg(dev, FCT_FLOW, fct_flow);
 499        check_warn_return(ret, "Error writing FCT_FLOW");
 500
 501        return 0;
 502}
 503
 504static int smsc75xx_link_reset(struct usbnet *dev)
 505{
 506        struct mii_if_info *mii = &dev->mii;
 507        struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET };
 508        u16 lcladv, rmtadv;
 509        int ret;
 510
 511        /* clear interrupt status */
 512        ret = smsc75xx_mdio_read(dev->net, mii->phy_id, PHY_INT_SRC);
 513        check_warn_return(ret, "Error reading PHY_INT_SRC");
 514
 515        ret = smsc75xx_write_reg(dev, INT_STS, INT_STS_CLEAR_ALL);
 516        check_warn_return(ret, "Error writing INT_STS");
 517
 518        mii_check_media(mii, 1, 1);
 519        mii_ethtool_gset(&dev->mii, &ecmd);
 520        lcladv = smsc75xx_mdio_read(dev->net, mii->phy_id, MII_ADVERTISE);
 521        rmtadv = smsc75xx_mdio_read(dev->net, mii->phy_id, MII_LPA);
 522
 523        netif_dbg(dev, link, dev->net, "speed: %u duplex: %d lcladv: %04x"
 524                  " rmtadv: %04x", ethtool_cmd_speed(&ecmd),
 525                  ecmd.duplex, lcladv, rmtadv);
 526
 527        return smsc75xx_update_flowcontrol(dev, ecmd.duplex, lcladv, rmtadv);
 528}
 529
 530static void smsc75xx_status(struct usbnet *dev, struct urb *urb)
 531{
 532        u32 intdata;
 533
 534        if (urb->actual_length != 4) {
 535                netdev_warn(dev->net,
 536                        "unexpected urb length %d", urb->actual_length);
 537                return;
 538        }
 539
 540        memcpy(&intdata, urb->transfer_buffer, 4);
 541        le32_to_cpus(&intdata);
 542
 543        netif_dbg(dev, link, dev->net, "intdata: 0x%08X", intdata);
 544
 545        if (intdata & INT_ENP_PHY_INT)
 546                usbnet_defer_kevent(dev, EVENT_LINK_RESET);
 547        else
 548                netdev_warn(dev->net,
 549                        "unexpected interrupt, intdata=0x%08X", intdata);
 550}
 551
 552static int smsc75xx_ethtool_get_eeprom_len(struct net_device *net)
 553{
 554        return MAX_EEPROM_SIZE;
 555}
 556
 557static int smsc75xx_ethtool_get_eeprom(struct net_device *netdev,
 558                                       struct ethtool_eeprom *ee, u8 *data)
 559{
 560        struct usbnet *dev = netdev_priv(netdev);
 561
 562        ee->magic = LAN75XX_EEPROM_MAGIC;
 563
 564        return smsc75xx_read_eeprom(dev, ee->offset, ee->len, data);
 565}
 566
 567static int smsc75xx_ethtool_set_eeprom(struct net_device *netdev,
 568                                       struct ethtool_eeprom *ee, u8 *data)
 569{
 570        struct usbnet *dev = netdev_priv(netdev);
 571
 572        if (ee->magic != LAN75XX_EEPROM_MAGIC) {
 573                netdev_warn(dev->net,
 574                        "EEPROM: magic value mismatch: 0x%x", ee->magic);
 575                return -EINVAL;
 576        }
 577
 578        return smsc75xx_write_eeprom(dev, ee->offset, ee->len, data);
 579}
 580
 581static const struct ethtool_ops smsc75xx_ethtool_ops = {
 582        .get_link       = usbnet_get_link,
 583        .nway_reset     = usbnet_nway_reset,
 584        .get_drvinfo    = usbnet_get_drvinfo,
 585        .get_msglevel   = usbnet_get_msglevel,
 586        .set_msglevel   = usbnet_set_msglevel,
 587        .get_settings   = usbnet_get_settings,
 588        .set_settings   = usbnet_set_settings,
 589        .get_eeprom_len = smsc75xx_ethtool_get_eeprom_len,
 590        .get_eeprom     = smsc75xx_ethtool_get_eeprom,
 591        .set_eeprom     = smsc75xx_ethtool_set_eeprom,
 592};
 593
 594static int smsc75xx_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd)
 595{
 596        struct usbnet *dev = netdev_priv(netdev);
 597
 598        if (!netif_running(netdev))
 599                return -EINVAL;
 600
 601        return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
 602}
 603
 604static void smsc75xx_init_mac_address(struct usbnet *dev)
 605{
 606        /* try reading mac address from EEPROM */
 607        if (smsc75xx_read_eeprom(dev, EEPROM_MAC_OFFSET, ETH_ALEN,
 608                        dev->net->dev_addr) == 0) {
 609                if (is_valid_ether_addr(dev->net->dev_addr)) {
 610                        /* eeprom values are valid so use them */
 611                        netif_dbg(dev, ifup, dev->net,
 612                                "MAC address read from EEPROM");
 613                        return;
 614                }
 615        }
 616
 617        /* no eeprom, or eeprom values are invalid. generate random MAC */
 618        random_ether_addr(dev->net->dev_addr);
 619        netif_dbg(dev, ifup, dev->net, "MAC address set to random_ether_addr");
 620}
 621
 622static int smsc75xx_set_mac_address(struct usbnet *dev)
 623{
 624        u32 addr_lo = dev->net->dev_addr[0] | dev->net->dev_addr[1] << 8 |
 625                dev->net->dev_addr[2] << 16 | dev->net->dev_addr[3] << 24;
 626        u32 addr_hi = dev->net->dev_addr[4] | dev->net->dev_addr[5] << 8;
 627
 628        int ret = smsc75xx_write_reg(dev, RX_ADDRH, addr_hi);
 629        check_warn_return(ret, "Failed to write RX_ADDRH: %d", ret);
 630
 631        ret = smsc75xx_write_reg(dev, RX_ADDRL, addr_lo);
 632        check_warn_return(ret, "Failed to write RX_ADDRL: %d", ret);
 633
 634        addr_hi |= ADDR_FILTX_FB_VALID;
 635        ret = smsc75xx_write_reg(dev, ADDR_FILTX, addr_hi);
 636        check_warn_return(ret, "Failed to write ADDR_FILTX: %d", ret);
 637
 638        ret = smsc75xx_write_reg(dev, ADDR_FILTX + 4, addr_lo);
 639        check_warn_return(ret, "Failed to write ADDR_FILTX+4: %d", ret);
 640
 641        return 0;
 642}
 643
 644static int smsc75xx_phy_initialize(struct usbnet *dev)
 645{
 646        int bmcr, timeout = 0;
 647
 648        /* Initialize MII structure */
 649        dev->mii.dev = dev->net;
 650        dev->mii.mdio_read = smsc75xx_mdio_read;
 651        dev->mii.mdio_write = smsc75xx_mdio_write;
 652        dev->mii.phy_id_mask = 0x1f;
 653        dev->mii.reg_num_mask = 0x1f;
 654        dev->mii.phy_id = SMSC75XX_INTERNAL_PHY_ID;
 655
 656        /* reset phy and wait for reset to complete */
 657        smsc75xx_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
 658
 659        do {
 660                msleep(10);
 661                bmcr = smsc75xx_mdio_read(dev->net, dev->mii.phy_id, MII_BMCR);
 662                check_warn_return(bmcr, "Error reading MII_BMCR");
 663                timeout++;
 664        } while ((bmcr & MII_BMCR) && (timeout < 100));
 665
 666        if (timeout >= 100) {
 667                netdev_warn(dev->net, "timeout on PHY Reset");
 668                return -EIO;
 669        }
 670
 671        smsc75xx_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
 672                ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP |
 673                ADVERTISE_PAUSE_ASYM);
 674
 675        /* read to clear */
 676        smsc75xx_mdio_read(dev->net, dev->mii.phy_id, PHY_INT_SRC);
 677        check_warn_return(bmcr, "Error reading PHY_INT_SRC");
 678
 679        smsc75xx_mdio_write(dev->net, dev->mii.phy_id, PHY_INT_MASK,
 680                PHY_INT_MASK_DEFAULT);
 681        mii_nway_restart(&dev->mii);
 682
 683        netif_dbg(dev, ifup, dev->net, "phy initialised successfully");
 684        return 0;
 685}
 686
 687static int smsc75xx_set_rx_max_frame_length(struct usbnet *dev, int size)
 688{
 689        int ret = 0;
 690        u32 buf;
 691        bool rxenabled;
 692
 693        ret = smsc75xx_read_reg(dev, MAC_RX, &buf);
 694        check_warn_return(ret, "Failed to read MAC_RX: %d", ret);
 695
 696        rxenabled = ((buf & MAC_RX_RXEN) != 0);
 697
 698        if (rxenabled) {
 699                buf &= ~MAC_RX_RXEN;
 700                ret = smsc75xx_write_reg(dev, MAC_RX, buf);
 701                check_warn_return(ret, "Failed to write MAC_RX: %d", ret);
 702        }
 703
 704        /* add 4 to size for FCS */
 705        buf &= ~MAC_RX_MAX_SIZE;
 706        buf |= (((size + 4) << MAC_RX_MAX_SIZE_SHIFT) & MAC_RX_MAX_SIZE);
 707
 708        ret = smsc75xx_write_reg(dev, MAC_RX, buf);
 709        check_warn_return(ret, "Failed to write MAC_RX: %d", ret);
 710
 711        if (rxenabled) {
 712                buf |= MAC_RX_RXEN;
 713                ret = smsc75xx_write_reg(dev, MAC_RX, buf);
 714                check_warn_return(ret, "Failed to write MAC_RX: %d", ret);
 715        }
 716
 717        return 0;
 718}
 719
 720static int smsc75xx_change_mtu(struct net_device *netdev, int new_mtu)
 721{
 722        struct usbnet *dev = netdev_priv(netdev);
 723
 724        int ret = smsc75xx_set_rx_max_frame_length(dev, new_mtu);
 725        check_warn_return(ret, "Failed to set mac rx frame length");
 726
 727        return usbnet_change_mtu(netdev, new_mtu);
 728}
 729
 730/* Enable or disable Rx checksum offload engine */
 731static int smsc75xx_set_features(struct net_device *netdev, u32 features)
 732{
 733        struct usbnet *dev = netdev_priv(netdev);
 734        struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
 735        unsigned long flags;
 736        int ret;
 737
 738        spin_lock_irqsave(&pdata->rfe_ctl_lock, flags);
 739
 740        if (features & NETIF_F_RXCSUM)
 741                pdata->rfe_ctl |= RFE_CTL_TCPUDP_CKM | RFE_CTL_IP_CKM;
 742        else
 743                pdata->rfe_ctl &= ~(RFE_CTL_TCPUDP_CKM | RFE_CTL_IP_CKM);
 744
 745        spin_unlock_irqrestore(&pdata->rfe_ctl_lock, flags);
 746        /* it's racing here! */
 747
 748        ret = smsc75xx_write_reg(dev, RFE_CTL, pdata->rfe_ctl);
 749        check_warn_return(ret, "Error writing RFE_CTL");
 750
 751        return 0;
 752}
 753
 754static int smsc75xx_reset(struct usbnet *dev)
 755{
 756        struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
 757        u32 buf;
 758        int ret = 0, timeout;
 759
 760        netif_dbg(dev, ifup, dev->net, "entering smsc75xx_reset");
 761
 762        ret = smsc75xx_read_reg(dev, HW_CFG, &buf);
 763        check_warn_return(ret, "Failed to read HW_CFG: %d", ret);
 764
 765        buf |= HW_CFG_LRST;
 766
 767        ret = smsc75xx_write_reg(dev, HW_CFG, buf);
 768        check_warn_return(ret, "Failed to write HW_CFG: %d", ret);
 769
 770        timeout = 0;
 771        do {
 772                msleep(10);
 773                ret = smsc75xx_read_reg(dev, HW_CFG, &buf);
 774                check_warn_return(ret, "Failed to read HW_CFG: %d", ret);
 775                timeout++;
 776        } while ((buf & HW_CFG_LRST) && (timeout < 100));
 777
 778        if (timeout >= 100) {
 779                netdev_warn(dev->net, "timeout on completion of Lite Reset");
 780                return -EIO;
 781        }
 782
 783        netif_dbg(dev, ifup, dev->net, "Lite reset complete, resetting PHY");
 784
 785        ret = smsc75xx_read_reg(dev, PMT_CTL, &buf);
 786        check_warn_return(ret, "Failed to read PMT_CTL: %d", ret);
 787
 788        buf |= PMT_CTL_PHY_RST;
 789
 790        ret = smsc75xx_write_reg(dev, PMT_CTL, buf);
 791        check_warn_return(ret, "Failed to write PMT_CTL: %d", ret);
 792
 793        timeout = 0;
 794        do {
 795                msleep(10);
 796                ret = smsc75xx_read_reg(dev, PMT_CTL, &buf);
 797                check_warn_return(ret, "Failed to read PMT_CTL: %d", ret);
 798                timeout++;
 799        } while ((buf & PMT_CTL_PHY_RST) && (timeout < 100));
 800
 801        if (timeout >= 100) {
 802                netdev_warn(dev->net, "timeout waiting for PHY Reset");
 803                return -EIO;
 804        }
 805
 806        netif_dbg(dev, ifup, dev->net, "PHY reset complete");
 807
 808        smsc75xx_init_mac_address(dev);
 809
 810        ret = smsc75xx_set_mac_address(dev);
 811        check_warn_return(ret, "Failed to set mac address");
 812
 813        netif_dbg(dev, ifup, dev->net, "MAC Address: %pM", dev->net->dev_addr);
 814
 815        ret = smsc75xx_read_reg(dev, HW_CFG, &buf);
 816        check_warn_return(ret, "Failed to read HW_CFG: %d", ret);
 817
 818        netif_dbg(dev, ifup, dev->net, "Read Value from HW_CFG : 0x%08x", buf);
 819
 820        buf |= HW_CFG_BIR;
 821
 822        ret = smsc75xx_write_reg(dev, HW_CFG, buf);
 823        check_warn_return(ret, "Failed to write HW_CFG: %d", ret);
 824
 825        ret = smsc75xx_read_reg(dev, HW_CFG, &buf);
 826        check_warn_return(ret, "Failed to read HW_CFG: %d", ret);
 827
 828        netif_dbg(dev, ifup, dev->net, "Read Value from HW_CFG after "
 829                        "writing HW_CFG_BIR: 0x%08x", buf);
 830
 831        if (!turbo_mode) {
 832                buf = 0;
 833                dev->rx_urb_size = MAX_SINGLE_PACKET_SIZE;
 834        } else if (dev->udev->speed == USB_SPEED_HIGH) {
 835                buf = DEFAULT_HS_BURST_CAP_SIZE / HS_USB_PKT_SIZE;
 836                dev->rx_urb_size = DEFAULT_HS_BURST_CAP_SIZE;
 837        } else {
 838                buf = DEFAULT_FS_BURST_CAP_SIZE / FS_USB_PKT_SIZE;
 839                dev->rx_urb_size = DEFAULT_FS_BURST_CAP_SIZE;
 840        }
 841
 842        netif_dbg(dev, ifup, dev->net, "rx_urb_size=%ld",
 843                (ulong)dev->rx_urb_size);
 844
 845        ret = smsc75xx_write_reg(dev, BURST_CAP, buf);
 846        check_warn_return(ret, "Failed to write BURST_CAP: %d", ret);
 847
 848        ret = smsc75xx_read_reg(dev, BURST_CAP, &buf);
 849        check_warn_return(ret, "Failed to read BURST_CAP: %d", ret);
 850
 851        netif_dbg(dev, ifup, dev->net,
 852                "Read Value from BURST_CAP after writing: 0x%08x", buf);
 853
 854        ret = smsc75xx_write_reg(dev, BULK_IN_DLY, DEFAULT_BULK_IN_DELAY);
 855        check_warn_return(ret, "Failed to write BULK_IN_DLY: %d", ret);
 856
 857        ret = smsc75xx_read_reg(dev, BULK_IN_DLY, &buf);
 858        check_warn_return(ret, "Failed to read BULK_IN_DLY: %d", ret);
 859
 860        netif_dbg(dev, ifup, dev->net,
 861                "Read Value from BULK_IN_DLY after writing: 0x%08x", buf);
 862
 863        if (turbo_mode) {
 864                ret = smsc75xx_read_reg(dev, HW_CFG, &buf);
 865                check_warn_return(ret, "Failed to read HW_CFG: %d", ret);
 866
 867                netif_dbg(dev, ifup, dev->net, "HW_CFG: 0x%08x", buf);
 868
 869                buf |= (HW_CFG_MEF | HW_CFG_BCE);
 870
 871                ret = smsc75xx_write_reg(dev, HW_CFG, buf);
 872                check_warn_return(ret, "Failed to write HW_CFG: %d", ret);
 873
 874                ret = smsc75xx_read_reg(dev, HW_CFG, &buf);
 875                check_warn_return(ret, "Failed to read HW_CFG: %d", ret);
 876
 877                netif_dbg(dev, ifup, dev->net, "HW_CFG: 0x%08x", buf);
 878        }
 879
 880        /* set FIFO sizes */
 881        buf = (MAX_RX_FIFO_SIZE - 512) / 512;
 882        ret = smsc75xx_write_reg(dev, FCT_RX_FIFO_END, buf);
 883        check_warn_return(ret, "Failed to write FCT_RX_FIFO_END: %d", ret);
 884
 885        netif_dbg(dev, ifup, dev->net, "FCT_RX_FIFO_END set to 0x%08x", buf);
 886
 887        buf = (MAX_TX_FIFO_SIZE - 512) / 512;
 888        ret = smsc75xx_write_reg(dev, FCT_TX_FIFO_END, buf);
 889        check_warn_return(ret, "Failed to write FCT_TX_FIFO_END: %d", ret);
 890
 891        netif_dbg(dev, ifup, dev->net, "FCT_TX_FIFO_END set to 0x%08x", buf);
 892
 893        ret = smsc75xx_write_reg(dev, INT_STS, INT_STS_CLEAR_ALL);
 894        check_warn_return(ret, "Failed to write INT_STS: %d", ret);
 895
 896        ret = smsc75xx_read_reg(dev, ID_REV, &buf);
 897        check_warn_return(ret, "Failed to read ID_REV: %d", ret);
 898
 899        netif_dbg(dev, ifup, dev->net, "ID_REV = 0x%08x", buf);
 900
 901        /* Configure GPIO pins as LED outputs */
 902        ret = smsc75xx_read_reg(dev, LED_GPIO_CFG, &buf);
 903        check_warn_return(ret, "Failed to read LED_GPIO_CFG: %d", ret);
 904
 905        buf &= ~(LED_GPIO_CFG_LED2_FUN_SEL | LED_GPIO_CFG_LED10_FUN_SEL);
 906        buf |= LED_GPIO_CFG_LEDGPIO_EN | LED_GPIO_CFG_LED2_FUN_SEL;
 907
 908        ret = smsc75xx_write_reg(dev, LED_GPIO_CFG, buf);
 909        check_warn_return(ret, "Failed to write LED_GPIO_CFG: %d", ret);
 910
 911        ret = smsc75xx_write_reg(dev, FLOW, 0);
 912        check_warn_return(ret, "Failed to write FLOW: %d", ret);
 913
 914        ret = smsc75xx_write_reg(dev, FCT_FLOW, 0);
 915        check_warn_return(ret, "Failed to write FCT_FLOW: %d", ret);
 916
 917        /* Don't need rfe_ctl_lock during initialisation */
 918        ret = smsc75xx_read_reg(dev, RFE_CTL, &pdata->rfe_ctl);
 919        check_warn_return(ret, "Failed to read RFE_CTL: %d", ret);
 920
 921        pdata->rfe_ctl |= RFE_CTL_AB | RFE_CTL_DPF;
 922
 923        ret = smsc75xx_write_reg(dev, RFE_CTL, pdata->rfe_ctl);
 924        check_warn_return(ret, "Failed to write RFE_CTL: %d", ret);
 925
 926        ret = smsc75xx_read_reg(dev, RFE_CTL, &pdata->rfe_ctl);
 927        check_warn_return(ret, "Failed to read RFE_CTL: %d", ret);
 928
 929        netif_dbg(dev, ifup, dev->net, "RFE_CTL set to 0x%08x", pdata->rfe_ctl);
 930
 931        /* Enable or disable checksum offload engines */
 932        smsc75xx_set_features(dev->net, dev->net->features);
 933
 934        smsc75xx_set_multicast(dev->net);
 935
 936        ret = smsc75xx_phy_initialize(dev);
 937        check_warn_return(ret, "Failed to initialize PHY: %d", ret);
 938
 939        ret = smsc75xx_read_reg(dev, INT_EP_CTL, &buf);
 940        check_warn_return(ret, "Failed to read INT_EP_CTL: %d", ret);
 941
 942        /* enable PHY interrupts */
 943        buf |= INT_ENP_PHY_INT;
 944
 945        ret = smsc75xx_write_reg(dev, INT_EP_CTL, buf);
 946        check_warn_return(ret, "Failed to write INT_EP_CTL: %d", ret);
 947
 948        ret = smsc75xx_read_reg(dev, MAC_TX, &buf);
 949        check_warn_return(ret, "Failed to read MAC_TX: %d", ret);
 950
 951        buf |= MAC_TX_TXEN;
 952
 953        ret = smsc75xx_write_reg(dev, MAC_TX, buf);
 954        check_warn_return(ret, "Failed to write MAC_TX: %d", ret);
 955
 956        netif_dbg(dev, ifup, dev->net, "MAC_TX set to 0x%08x", buf);
 957
 958        ret = smsc75xx_read_reg(dev, FCT_TX_CTL, &buf);
 959        check_warn_return(ret, "Failed to read FCT_TX_CTL: %d", ret);
 960
 961        buf |= FCT_TX_CTL_EN;
 962
 963        ret = smsc75xx_write_reg(dev, FCT_TX_CTL, buf);
 964        check_warn_return(ret, "Failed to write FCT_TX_CTL: %d", ret);
 965
 966        netif_dbg(dev, ifup, dev->net, "FCT_TX_CTL set to 0x%08x", buf);
 967
 968        ret = smsc75xx_set_rx_max_frame_length(dev, 1514);
 969        check_warn_return(ret, "Failed to set max rx frame length");
 970
 971        ret = smsc75xx_read_reg(dev, MAC_RX, &buf);
 972        check_warn_return(ret, "Failed to read MAC_RX: %d", ret);
 973
 974        buf |= MAC_RX_RXEN;
 975
 976        ret = smsc75xx_write_reg(dev, MAC_RX, buf);
 977        check_warn_return(ret, "Failed to write MAC_RX: %d", ret);
 978
 979        netif_dbg(dev, ifup, dev->net, "MAC_RX set to 0x%08x", buf);
 980
 981        ret = smsc75xx_read_reg(dev, FCT_RX_CTL, &buf);
 982        check_warn_return(ret, "Failed to read FCT_RX_CTL: %d", ret);
 983
 984        buf |= FCT_RX_CTL_EN;
 985
 986        ret = smsc75xx_write_reg(dev, FCT_RX_CTL, buf);
 987        check_warn_return(ret, "Failed to write FCT_RX_CTL: %d", ret);
 988
 989        netif_dbg(dev, ifup, dev->net, "FCT_RX_CTL set to 0x%08x", buf);
 990
 991        netif_dbg(dev, ifup, dev->net, "smsc75xx_reset, return 0");
 992        return 0;
 993}
 994
 995static const struct net_device_ops smsc75xx_netdev_ops = {
 996        .ndo_open               = usbnet_open,
 997        .ndo_stop               = usbnet_stop,
 998        .ndo_start_xmit         = usbnet_start_xmit,
 999        .ndo_tx_timeout         = usbnet_tx_timeout,
1000        .ndo_change_mtu         = smsc75xx_change_mtu,
1001        .ndo_set_mac_address    = eth_mac_addr,
1002        .ndo_validate_addr      = eth_validate_addr,
1003        .ndo_do_ioctl           = smsc75xx_ioctl,
1004        .ndo_set_rx_mode        = smsc75xx_set_multicast,
1005        .ndo_set_features       = smsc75xx_set_features,
1006};
1007
1008static int smsc75xx_bind(struct usbnet *dev, struct usb_interface *intf)
1009{
1010        struct smsc75xx_priv *pdata = NULL;
1011        int ret;
1012
1013        printk(KERN_INFO SMSC_CHIPNAME " v" SMSC_DRIVER_VERSION "\n");
1014
1015        ret = usbnet_get_endpoints(dev, intf);
1016        check_warn_return(ret, "usbnet_get_endpoints failed: %d", ret);
1017
1018        dev->data[0] = (unsigned long)kzalloc(sizeof(struct smsc75xx_priv),
1019                GFP_KERNEL);
1020
1021        pdata = (struct smsc75xx_priv *)(dev->data[0]);
1022        if (!pdata) {
1023                netdev_warn(dev->net, "Unable to allocate smsc75xx_priv");
1024                return -ENOMEM;
1025        }
1026
1027        pdata->dev = dev;
1028
1029        spin_lock_init(&pdata->rfe_ctl_lock);
1030        mutex_init(&pdata->dataport_mutex);
1031
1032        INIT_WORK(&pdata->set_multicast, smsc75xx_deferred_multicast_write);
1033
1034        if (DEFAULT_TX_CSUM_ENABLE) {
1035                dev->net->features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
1036                if (DEFAULT_TSO_ENABLE)
1037                        dev->net->features |= NETIF_F_SG |
1038                                NETIF_F_TSO | NETIF_F_TSO6;
1039        }
1040        if (DEFAULT_RX_CSUM_ENABLE)
1041                dev->net->features |= NETIF_F_RXCSUM;
1042
1043        dev->net->hw_features = NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
1044                NETIF_F_SG | NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_RXCSUM;
1045
1046        /* Init all registers */
1047        ret = smsc75xx_reset(dev);
1048
1049        dev->net->netdev_ops = &smsc75xx_netdev_ops;
1050        dev->net->ethtool_ops = &smsc75xx_ethtool_ops;
1051        dev->net->flags |= IFF_MULTICAST;
1052        dev->net->hard_header_len += SMSC75XX_TX_OVERHEAD;
1053        return 0;
1054}
1055
1056static void smsc75xx_unbind(struct usbnet *dev, struct usb_interface *intf)
1057{
1058        struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
1059        if (pdata) {
1060                netif_dbg(dev, ifdown, dev->net, "free pdata");
1061                kfree(pdata);
1062                pdata = NULL;
1063                dev->data[0] = 0;
1064        }
1065}
1066
1067static void smsc75xx_rx_csum_offload(struct usbnet *dev, struct sk_buff *skb,
1068                                     u32 rx_cmd_a, u32 rx_cmd_b)
1069{
1070        if (!(dev->net->features & NETIF_F_RXCSUM) ||
1071            unlikely(rx_cmd_a & RX_CMD_A_LCSM)) {
1072                skb->ip_summed = CHECKSUM_NONE;
1073        } else {
1074                skb->csum = ntohs((u16)(rx_cmd_b >> RX_CMD_B_CSUM_SHIFT));
1075                skb->ip_summed = CHECKSUM_COMPLETE;
1076        }
1077}
1078
1079static int smsc75xx_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
1080{
1081        while (skb->len > 0) {
1082                u32 rx_cmd_a, rx_cmd_b, align_count, size;
1083                struct sk_buff *ax_skb;
1084                unsigned char *packet;
1085
1086                memcpy(&rx_cmd_a, skb->data, sizeof(rx_cmd_a));
1087                le32_to_cpus(&rx_cmd_a);
1088                skb_pull(skb, 4);
1089
1090                memcpy(&rx_cmd_b, skb->data, sizeof(rx_cmd_b));
1091                le32_to_cpus(&rx_cmd_b);
1092                skb_pull(skb, 4 + RXW_PADDING);
1093
1094                packet = skb->data;
1095
1096                /* get the packet length */
1097                size = (rx_cmd_a & RX_CMD_A_LEN) - RXW_PADDING;
1098                align_count = (4 - ((size + RXW_PADDING) % 4)) % 4;
1099
1100                if (unlikely(rx_cmd_a & RX_CMD_A_RED)) {
1101                        netif_dbg(dev, rx_err, dev->net,
1102                                "Error rx_cmd_a=0x%08x", rx_cmd_a);
1103                        dev->net->stats.rx_errors++;
1104                        dev->net->stats.rx_dropped++;
1105
1106                        if (rx_cmd_a & RX_CMD_A_FCS)
1107                                dev->net->stats.rx_crc_errors++;
1108                        else if (rx_cmd_a & (RX_CMD_A_LONG | RX_CMD_A_RUNT))
1109                                dev->net->stats.rx_frame_errors++;
1110                } else {
1111                        /* ETH_FRAME_LEN + 4(CRC) + 2(COE) + 4(Vlan) */
1112                        if (unlikely(size > (ETH_FRAME_LEN + 12))) {
1113                                netif_dbg(dev, rx_err, dev->net,
1114                                        "size err rx_cmd_a=0x%08x", rx_cmd_a);
1115                                return 0;
1116                        }
1117
1118                        /* last frame in this batch */
1119                        if (skb->len == size) {
1120                                smsc75xx_rx_csum_offload(dev, skb, rx_cmd_a,
1121                                        rx_cmd_b);
1122
1123                                skb_trim(skb, skb->len - 4); /* remove fcs */
1124                                skb->truesize = size + sizeof(struct sk_buff);
1125
1126                                return 1;
1127                        }
1128
1129                        ax_skb = skb_clone(skb, GFP_ATOMIC);
1130                        if (unlikely(!ax_skb)) {
1131                                netdev_warn(dev->net, "Error allocating skb");
1132                                return 0;
1133                        }
1134
1135                        ax_skb->len = size;
1136                        ax_skb->data = packet;
1137                        skb_set_tail_pointer(ax_skb, size);
1138
1139                        smsc75xx_rx_csum_offload(dev, ax_skb, rx_cmd_a,
1140                                rx_cmd_b);
1141
1142                        skb_trim(ax_skb, ax_skb->len - 4); /* remove fcs */
1143                        ax_skb->truesize = size + sizeof(struct sk_buff);
1144
1145                        usbnet_skb_return(dev, ax_skb);
1146                }
1147
1148                skb_pull(skb, size);
1149
1150                /* padding bytes before the next frame starts */
1151                if (skb->len)
1152                        skb_pull(skb, align_count);
1153        }
1154
1155        if (unlikely(skb->len < 0)) {
1156                netdev_warn(dev->net, "invalid rx length<0 %d", skb->len);
1157                return 0;
1158        }
1159
1160        return 1;
1161}
1162
1163static struct sk_buff *smsc75xx_tx_fixup(struct usbnet *dev,
1164                                         struct sk_buff *skb, gfp_t flags)
1165{
1166        u32 tx_cmd_a, tx_cmd_b;
1167
1168        skb_linearize(skb);
1169
1170        if (skb_headroom(skb) < SMSC75XX_TX_OVERHEAD) {
1171                struct sk_buff *skb2 =
1172                        skb_copy_expand(skb, SMSC75XX_TX_OVERHEAD, 0, flags);
1173                dev_kfree_skb_any(skb);
1174                skb = skb2;
1175                if (!skb)
1176                        return NULL;
1177        }
1178
1179        tx_cmd_a = (u32)(skb->len & TX_CMD_A_LEN) | TX_CMD_A_FCS;
1180
1181        if (skb->ip_summed == CHECKSUM_PARTIAL)
1182                tx_cmd_a |= TX_CMD_A_IPE | TX_CMD_A_TPE;
1183
1184        if (skb_is_gso(skb)) {
1185                u16 mss = max(skb_shinfo(skb)->gso_size, TX_MSS_MIN);
1186                tx_cmd_b = (mss << TX_CMD_B_MSS_SHIFT) & TX_CMD_B_MSS;
1187
1188                tx_cmd_a |= TX_CMD_A_LSO;
1189        } else {
1190                tx_cmd_b = 0;
1191        }
1192
1193        skb_push(skb, 4);
1194        cpu_to_le32s(&tx_cmd_b);
1195        memcpy(skb->data, &tx_cmd_b, 4);
1196
1197        skb_push(skb, 4);
1198        cpu_to_le32s(&tx_cmd_a);
1199        memcpy(skb->data, &tx_cmd_a, 4);
1200
1201        return skb;
1202}
1203
1204static const struct driver_info smsc75xx_info = {
1205        .description    = "smsc75xx USB 2.0 Gigabit Ethernet",
1206        .bind           = smsc75xx_bind,
1207        .unbind         = smsc75xx_unbind,
1208        .link_reset     = smsc75xx_link_reset,
1209        .reset          = smsc75xx_reset,
1210        .rx_fixup       = smsc75xx_rx_fixup,
1211        .tx_fixup       = smsc75xx_tx_fixup,
1212        .status         = smsc75xx_status,
1213        .flags          = FLAG_ETHER | FLAG_SEND_ZLP,
1214};
1215
1216static const struct usb_device_id products[] = {
1217        {
1218                /* SMSC7500 USB Gigabit Ethernet Device */
1219                USB_DEVICE(USB_VENDOR_ID_SMSC, USB_PRODUCT_ID_LAN7500),
1220                .driver_info = (unsigned long) &smsc75xx_info,
1221        },
1222        {
1223                /* SMSC7500 USB Gigabit Ethernet Device */
1224                USB_DEVICE(USB_VENDOR_ID_SMSC, USB_PRODUCT_ID_LAN7505),
1225                .driver_info = (unsigned long) &smsc75xx_info,
1226        },
1227        { },            /* END */
1228};
1229MODULE_DEVICE_TABLE(usb, products);
1230
1231static struct usb_driver smsc75xx_driver = {
1232        .name           = SMSC_CHIPNAME,
1233        .id_table       = products,
1234        .probe          = usbnet_probe,
1235        .suspend        = usbnet_suspend,
1236        .resume         = usbnet_resume,
1237        .disconnect     = usbnet_disconnect,
1238};
1239
1240static int __init smsc75xx_init(void)
1241{
1242        return usb_register(&smsc75xx_driver);
1243}
1244module_init(smsc75xx_init);
1245
1246static void __exit smsc75xx_exit(void)
1247{
1248        usb_deregister(&smsc75xx_driver);
1249}
1250module_exit(smsc75xx_exit);
1251
1252MODULE_AUTHOR("Nancy Lin");
1253MODULE_AUTHOR("Steve Glendinning <steve.glendinning@smsc.com>");
1254MODULE_DESCRIPTION("SMSC75XX USB 2.0 Gigabit Ethernet Devices");
1255MODULE_LICENSE("GPL");
1256