/*
 * Atheros CARL9170 driver
 *
 * USB - frontend
 *
 * Copyright 2008, Johannes Berg <johannes@sipsolutions.net>
 * Copyright 2009, 2010, Christian Lamparter <chunkeey@googlemail.com>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; see the file COPYING.  If not, see
 * http://www.gnu.org/licenses/.
 *
 * This file incorporates work covered by the following copyright and
 * permission notice:
 *    Copyright (c) 2007-2008 Atheros Communications, Inc.
 *
 *    Permission to use, copy, modify, and/or distribute this software for any
 *    purpose with or without fee is hereby granted, provided that the above
 *    copyright notice and this permission notice appear in all copies.
 *
 *    THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
 *    WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
 *    MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
 *    ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
 *    WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
 *    ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
 *    OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 */

#include <linux/module.h>
#include <linux/slab.h>
#include <linux/usb.h>
#include <linux/firmware.h>
#include <linux/etherdevice.h>
#include <linux/device.h>
#include <net/mac80211.h>
#include "carl9170.h"
#include "cmd.h"
#include "hw.h"
#include "fwcmd.h"

MODULE_AUTHOR("Johannes Berg <johannes@sipsolutions.net>");
MODULE_AUTHOR("Christian Lamparter <chunkeey@googlemail.com>");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Atheros AR9170 802.11n USB wireless");
MODULE_FIRMWARE(CARL9170FW_NAME);
MODULE_ALIAS("ar9170usb");
MODULE_ALIAS("arusb_lnx");

/*
 * Note:
 *
 * Always update our wiki's device list (located at:
 * http://wireless.kernel.org/en/users/Drivers/ar9170/devices ),
 * whenever you add a new device.
 */
static struct usb_device_id carl9170_usb_ids[] = {
        /* Atheros 9170 */
        { USB_DEVICE(0x0cf3, 0x9170) },
        /* Atheros TG121N */
        { USB_DEVICE(0x0cf3, 0x1001) },
        /* TP-Link TL-WN821N v2 */
        { USB_DEVICE(0x0cf3, 0x1002), .driver_info = CARL9170_WPS_BUTTON |
                 CARL9170_ONE_LED },
        /* 3Com Dual Band 802.11n USB Adapter */
        { USB_DEVICE(0x0cf3, 0x1010) },
        /* H3C Dual Band 802.11n USB Adapter */
        { USB_DEVICE(0x0cf3, 0x1011) },
        /* Cace Airpcap NX */
        { USB_DEVICE(0xcace, 0x0300) },
        /* D-Link DWA 160 A1 */
        { USB_DEVICE(0x07d1, 0x3c10) },
        /* D-Link DWA 160 A2 */
        { USB_DEVICE(0x07d1, 0x3a09) },
        /* D-Link DWA 130 D */
        { USB_DEVICE(0x07d1, 0x3a0f) },
        /* Netgear WNA1000 */
        { USB_DEVICE(0x0846, 0x9040) },
        /* Netgear WNDA3100 (v1) */
        { USB_DEVICE(0x0846, 0x9010) },
        /* Netgear WN111 v2 */
        { USB_DEVICE(0x0846, 0x9001), .driver_info = CARL9170_ONE_LED },
        /* Zydas ZD1221 */
        { USB_DEVICE(0x0ace, 0x1221) },
        /* Proxim ORiNOCO 802.11n USB */
        { USB_DEVICE(0x1435, 0x0804) },
        /* WNC Generic 11n USB Dongle */
        { USB_DEVICE(0x1435, 0x0326) },
        /* ZyXEL NWD271N */
        { USB_DEVICE(0x0586, 0x3417) },
        /* Z-Com UB81 BG */
        { USB_DEVICE(0x0cde, 0x0023) },
        /* Z-Com UB82 ABG */
        { USB_DEVICE(0x0cde, 0x0026) },
        /* Sphairon Homelink 1202 */
        { USB_DEVICE(0x0cde, 0x0027) },
        /* Arcadyan WN7512 */
        { USB_DEVICE(0x083a, 0xf522) },
        /* Planex GWUS300 */
        { USB_DEVICE(0x2019, 0x5304) },
        /* IO-Data WNGDNUS2 */
        { USB_DEVICE(0x04bb, 0x093f) },
        /* NEC WL300NU-G */
        { USB_DEVICE(0x0409, 0x0249) },
        /* NEC WL300NU-AG */
        { USB_DEVICE(0x0409, 0x02b4) },
        /* AVM FRITZ!WLAN USB Stick N */
        { USB_DEVICE(0x057c, 0x8401) },
        /* AVM FRITZ!WLAN USB Stick N 2.4 */
        { USB_DEVICE(0x057c, 0x8402) },
        /* Qwest/Actiontec 802AIN Wireless N USB Network Adapter */
        { USB_DEVICE(0x1668, 0x1200) },
        /* Airlive X.USB a/b/g/n */
        { USB_DEVICE(0x1b75, 0x9170) },

        /* terminate */
        {}
};
MODULE_DEVICE_TABLE(usb, carl9170_usb_ids);

static void carl9170_usb_submit_data_urb(struct ar9170 *ar)
{
        struct urb *urb;
        int err;

        if (atomic_inc_return(&ar->tx_anch_urbs) > AR9170_NUM_TX_URBS)
                goto err_acc;

        urb = usb_get_from_anchor(&ar->tx_wait);
        if (!urb)
                goto err_acc;

        usb_anchor_urb(urb, &ar->tx_anch);

        err = usb_submit_urb(urb, GFP_ATOMIC);
        if (unlikely(err)) {
                if (net_ratelimit()) {
                        dev_err(&ar->udev->dev, "tx submit failed (%d)\n",
                                urb->status);
                }

                usb_unanchor_urb(urb);
                usb_anchor_urb(urb, &ar->tx_err);
        }

        usb_free_urb(urb);

        if (likely(err == 0))
                return;

err_acc:
        atomic_dec(&ar->tx_anch_urbs);
}

static void carl9170_usb_tx_data_complete(struct urb *urb)
{
        struct ar9170 *ar = usb_get_intfdata(usb_ifnum_to_if(urb->dev, 0));

        if (WARN_ON_ONCE(!ar)) {
                dev_kfree_skb_irq(urb->context);
                return;
        }

        atomic_dec(&ar->tx_anch_urbs);

        switch (urb->status) {
        /* everything is fine */
        case 0:
                carl9170_tx_callback(ar, (void *)urb->context);
                break;

        /* disconnect */
        case -ENOENT:
        case -ECONNRESET:
        case -ENODEV:
        case -ESHUTDOWN:
                /*
                 * Defer the frame clean-up to the tasklet worker.
                 * This is necessary, because carl9170_tx_drop
                 * does not work in an irqsave context.
                 */
                usb_anchor_urb(urb, &ar->tx_err);
                return;

        /* a random transmission error has occurred? */
        default:
                if (net_ratelimit()) {
                        dev_err(&ar->udev->dev, "tx failed (%d)\n",
                                urb->status);
                }

                usb_anchor_urb(urb, &ar->tx_err);
                break;
        }

        if (likely(IS_STARTED(ar)))
                carl9170_usb_submit_data_urb(ar);
}

static int carl9170_usb_submit_cmd_urb(struct ar9170 *ar)
{
        struct urb *urb;
        int err;

        if (atomic_inc_return(&ar->tx_cmd_urbs) != 1) {
                atomic_dec(&ar->tx_cmd_urbs);
                return 0;
        }

        urb = usb_get_from_anchor(&ar->tx_cmd);
        if (!urb) {
                atomic_dec(&ar->tx_cmd_urbs);
                return 0;
        }

        usb_anchor_urb(urb, &ar->tx_anch);
        err = usb_submit_urb(urb, GFP_ATOMIC);
        if (unlikely(err)) {
                usb_unanchor_urb(urb);
                atomic_dec(&ar->tx_cmd_urbs);
        }
        usb_free_urb(urb);

        return err;
}

static void carl9170_usb_cmd_complete(struct urb *urb)
{
        struct ar9170 *ar = urb->context;
        int err = 0;

        if (WARN_ON_ONCE(!ar))
                return;

        atomic_dec(&ar->tx_cmd_urbs);

        switch (urb->status) {
        /* everything is fine */
        case 0:
                break;

        /* disconnect */
        case -ENOENT:
        case -ECONNRESET:
        case -ENODEV:
        case -ESHUTDOWN:
                return;

        default:
                err = urb->status;
                break;
        }

        if (!IS_INITIALIZED(ar))
                return;

        if (err)
                dev_err(&ar->udev->dev, "submit cmd cb failed (%d).\n", err);

        err = carl9170_usb_submit_cmd_urb(ar);
        if (err)
                dev_err(&ar->udev->dev, "submit cmd failed (%d).\n", err);
}

static void carl9170_usb_rx_irq_complete(struct urb *urb)
{
        struct ar9170 *ar = urb->context;

        if (WARN_ON_ONCE(!ar))
                return;

        switch (urb->status) {
        /* everything is fine */
        case 0:
                break;

        /* disconnect */
        case -ENOENT:
        case -ECONNRESET:
        case -ENODEV:
        case -ESHUTDOWN:
                return;

        default:
                goto resubmit;
        }

        carl9170_handle_command_response(ar, urb->transfer_buffer,
                                         urb->actual_length);

resubmit:
        usb_anchor_urb(urb, &ar->rx_anch);
        if (unlikely(usb_submit_urb(urb, GFP_ATOMIC)))
                usb_unanchor_urb(urb);
}

static int carl9170_usb_submit_rx_urb(struct ar9170 *ar, gfp_t gfp)
{
        struct urb *urb;
        int err = 0, runs = 0;

        while ((atomic_read(&ar->rx_anch_urbs) < AR9170_NUM_RX_URBS) &&
                (runs++ < AR9170_NUM_RX_URBS)) {
                err = -ENOSPC;
                urb = usb_get_from_anchor(&ar->rx_pool);
                if (urb) {
                        usb_anchor_urb(urb, &ar->rx_anch);
                        err = usb_submit_urb(urb, gfp);
                        if (unlikely(err)) {
                                usb_unanchor_urb(urb);
                                usb_anchor_urb(urb, &ar->rx_pool);
                        } else {
                                atomic_dec(&ar->rx_pool_urbs);
                                atomic_inc(&ar->rx_anch_urbs);
                        }
                        usb_free_urb(urb);
                }
        }

        return err;
}

static void carl9170_usb_rx_work(struct ar9170 *ar)
{
        struct urb *urb;
        int i;

        for (i = 0; i < AR9170_NUM_RX_URBS_POOL; i++) {
                urb = usb_get_from_anchor(&ar->rx_work);
                if (!urb)
                        break;

                atomic_dec(&ar->rx_work_urbs);
                if (IS_INITIALIZED(ar)) {
                        carl9170_rx(ar, urb->transfer_buffer,
                                    urb->actual_length);
                }

                usb_anchor_urb(urb, &ar->rx_pool);
                atomic_inc(&ar->rx_pool_urbs);

                usb_free_urb(urb);

                carl9170_usb_submit_rx_urb(ar, GFP_ATOMIC);
        }
}

void carl9170_usb_handle_tx_err(struct ar9170 *ar)
{
        struct urb *urb;

        while ((urb = usb_get_from_anchor(&ar->tx_err))) {
                struct sk_buff *skb = (void *)urb->context;

                carl9170_tx_drop(ar, skb);
                carl9170_tx_callback(ar, skb);
                usb_free_urb(urb);
        }
}

static void carl9170_usb_tasklet(unsigned long data)
{
        struct ar9170 *ar = (struct ar9170 *) data;

        if (!IS_INITIALIZED(ar))
                return;

        carl9170_usb_rx_work(ar);

        /*
         * Strictly speaking: The tx scheduler is not part of the USB system.
         * But the rx worker returns frames back to the mac80211-stack and
         * this is the _perfect_ place to generate the next transmissions.
         */
        if (IS_STARTED(ar))
                carl9170_tx_scheduler(ar);
}

static void carl9170_usb_rx_complete(struct urb *urb)
{
        struct ar9170 *ar = (struct ar9170 *)urb->context;
        int err;

        if (WARN_ON_ONCE(!ar))
                return;

        atomic_dec(&ar->rx_anch_urbs);

        switch (urb->status) {
        case 0:
                /* rx path */
                usb_anchor_urb(urb, &ar->rx_work);
                atomic_inc(&ar->rx_work_urbs);
                break;

        case -ENOENT:
        case -ECONNRESET:
        case -ENODEV:
        case -ESHUTDOWN:
                /* handle disconnect events*/
                return;

        default:
                /* handle all other errors */
                usb_anchor_urb(urb, &ar->rx_pool);
                atomic_inc(&ar->rx_pool_urbs);
                break;
        }

        err = carl9170_usb_submit_rx_urb(ar, GFP_ATOMIC);
        if (unlikely(err)) {
                /*
                 * usb_submit_rx_urb reported a problem.
                 * In case this is due to a rx buffer shortage,
                 * elevate the tasklet worker priority to
                 * the highest available level.
                 */
                tasklet_hi_schedule(&ar->usb_tasklet);

                if (atomic_read(&ar->rx_anch_urbs) == 0) {
                        /*
                         * The system is too slow to cope with
                         * the enormous workload. We have simply
                         * run out of active rx urbs and this
                         * unfortunately leads to an unpredictable
                         * device.
                         */

                        ieee80211_queue_work(ar->hw, &ar->ping_work);
                }
        } else {
                /*
                 * Using anything less than _high_ priority absolutely
                 * kills the rx performance my UP-System...
                 */
                tasklet_hi_schedule(&ar->usb_tasklet);
        }
}

static struct urb *carl9170_usb_alloc_rx_urb(struct ar9170 *ar, gfp_t gfp)
{
        struct urb *urb;
        void *buf;

        buf = kmalloc(ar->fw.rx_size, gfp);
        if (!buf)
                return NULL;

        urb = usb_alloc_urb(0, gfp);
        if (!urb) {
                kfree(buf);
                return NULL;
        }

        usb_fill_bulk_urb(urb, ar->udev, usb_rcvbulkpipe(ar->udev,
                          AR9170_USB_EP_RX), buf, ar->fw.rx_size,
                          carl9170_usb_rx_complete, ar);

        urb->transfer_flags |= URB_FREE_BUFFER;

        return urb;
}

static int carl9170_usb_send_rx_irq_urb(struct ar9170 *ar)
{
        struct urb *urb = NULL;
        void *ibuf;
        int err = -ENOMEM;

        urb = usb_alloc_urb(0, GFP_KERNEL);
        if (!urb)
                goto out;

        ibuf = kmalloc(AR9170_USB_EP_CTRL_MAX, GFP_KERNEL);
        if (!ibuf)
                goto out;

        usb_fill_int_urb(urb, ar->udev, usb_rcvintpipe(ar->udev,
                         AR9170_USB_EP_IRQ), ibuf, AR9170_USB_EP_CTRL_MAX,
                         carl9170_usb_rx_irq_complete, ar, 1);

        urb->transfer_flags |= URB_FREE_BUFFER;

        usb_anchor_urb(urb, &ar->rx_anch);
        err = usb_submit_urb(urb, GFP_KERNEL);
        if (err)
                usb_unanchor_urb(urb);

out:
        usb_free_urb(urb);
        return err;
}

static int carl9170_usb_init_rx_bulk_urbs(struct ar9170 *ar)
{
        struct urb *urb;
        int i, err = -EINVAL;

        /*
         * The driver actively maintains a second shadow
         * pool for inactive, but fully-prepared rx urbs.
         *
         * The pool should help the driver to master huge
         * workload spikes without running the risk of
         * undersupplying the hardware or wasting time by
         * processing rx data (streams) inside the urb
         * completion (hardirq context).
         */
        for (i = 0; i < AR9170_NUM_RX_URBS_POOL; i++) {
                urb = carl9170_usb_alloc_rx_urb(ar, GFP_KERNEL);
                if (!urb) {
                        err = -ENOMEM;
                        goto err_out;
                }

                usb_anchor_urb(urb, &ar->rx_pool);
                atomic_inc(&ar->rx_pool_urbs);
                usb_free_urb(urb);
        }

        err = carl9170_usb_submit_rx_urb(ar, GFP_KERNEL);
        if (err)
                goto err_out;

        /* the device now waiting for the firmware. */
        carl9170_set_state_when(ar, CARL9170_STOPPED, CARL9170_IDLE);
        return 0;

err_out:

        usb_scuttle_anchored_urbs(&ar->rx_pool);
        usb_scuttle_anchored_urbs(&ar->rx_work);
        usb_kill_anchored_urbs(&ar->rx_anch);
        return err;
}

static int carl9170_usb_flush(struct ar9170 *ar)
{
        struct urb *urb;
        int ret, err = 0;

        while ((urb = usb_get_from_anchor(&ar->tx_wait))) {
                struct sk_buff *skb = (void *)urb->context;
                carl9170_tx_drop(ar, skb);
                carl9170_tx_callback(ar, skb);
                usb_free_urb(urb);
        }

        ret = usb_wait_anchor_empty_timeout(&ar->tx_cmd, 1000);
        if (ret == 0)
                err = -ETIMEDOUT;

        /* lets wait a while until the tx - queues are dried out */
        ret = usb_wait_anchor_empty_timeout(&ar->tx_anch, 1000);
        if (ret == 0)
                err = -ETIMEDOUT;

        usb_kill_anchored_urbs(&ar->tx_anch);
        carl9170_usb_handle_tx_err(ar);

        return err;
}

static void carl9170_usb_cancel_urbs(struct ar9170 *ar)
{
        int err;

        carl9170_set_state(ar, CARL9170_UNKNOWN_STATE);

        err = carl9170_usb_flush(ar);
        if (err)
                dev_err(&ar->udev->dev, "stuck tx urbs!\n");

        usb_poison_anchored_urbs(&ar->tx_anch);
        carl9170_usb_handle_tx_err(ar);
        usb_poison_anchored_urbs(&ar->rx_anch);

        tasklet_kill(&ar->usb_tasklet);

        usb_scuttle_anchored_urbs(&ar->rx_work);
        usb_scuttle_anchored_urbs(&ar->rx_pool);
        usb_scuttle_anchored_urbs(&ar->tx_cmd);
}

int __carl9170_exec_cmd(struct ar9170 *ar, struct carl9170_cmd *cmd,
                        const bool free_buf)
{
        struct urb *urb;
        int err = 0;

        if (!IS_INITIALIZED(ar)) {
                err = -EPERM;
                goto err_free;
        }

        if (WARN_ON(cmd->hdr.len > CARL9170_MAX_CMD_LEN - 4)) {
                err = -EINVAL;
                goto err_free;
        }

        urb = usb_alloc_urb(0, GFP_ATOMIC);
        if (!urb) {
                err = -ENOMEM;
                goto err_free;
        }

        usb_fill_int_urb(urb, ar->udev, usb_sndintpipe(ar->udev,
                AR9170_USB_EP_CMD), cmd, cmd->hdr.len + 4,
                carl9170_usb_cmd_complete, ar, 1);

        if (free_buf)
                urb->transfer_flags |= URB_FREE_BUFFER;

        usb_anchor_urb(urb, &ar->tx_cmd);
        usb_free_urb(urb);

        return carl9170_usb_submit_cmd_urb(ar);

err_free:
        if (free_buf)
                kfree(cmd);

        return err;
}

int carl9170_exec_cmd(struct ar9170 *ar, const enum carl9170_cmd_oids cmd,
        unsigned int plen, void *payload, unsigned int outlen, void *out)
{
        int err = -ENOMEM;

        if (!IS_ACCEPTING_CMD(ar))
                return -EIO;

        if (!(cmd & CARL9170_CMD_ASYNC_FLAG))
                might_sleep();

        ar->cmd.hdr.len = plen;
        ar->cmd.hdr.cmd = cmd;
        /* writing multiple regs fills this buffer already */
        if (plen && payload != (u8 *)(ar->cmd.data))
                memcpy(ar->cmd.data, payload, plen);

        spin_lock_bh(&ar->cmd_lock);
        ar->readbuf = (u8 *)out;
        ar->readlen = outlen;
        spin_unlock_bh(&ar->cmd_lock);

        err = __carl9170_exec_cmd(ar, &ar->cmd, false);

        if (!(cmd & CARL9170_CMD_ASYNC_FLAG)) {
                err = wait_for_completion_timeout(&ar->cmd_wait, HZ);
                if (err == 0) {
                        err = -ETIMEDOUT;
                        goto err_unbuf;
                }

                if (ar->readlen != outlen) {
                        err = -EMSGSIZE;
                        goto err_unbuf;
                }
        }

        return 0;

err_unbuf:
        /* Maybe the device was removed in the moment we were waiting? */
        if (IS_STARTED(ar)) {
                dev_err(&ar->udev->dev, "no command feedback "
                        "received (%d).\n", err);

                /* provide some maybe useful debug information */
                print_hex_dump_bytes("carl9170 cmd: ", DUMP_PREFIX_NONE,
                                     &ar->cmd, plen + 4);

                carl9170_restart(ar, CARL9170_RR_COMMAND_TIMEOUT);
        }

        /* invalidate to avoid completing the next command prematurely */
        spin_lock_bh(&ar->cmd_lock);
        ar->readbuf = NULL;
        ar->readlen = 0;
        spin_unlock_bh(&ar->cmd_lock);

        return err;
}

void carl9170_usb_tx(struct ar9170 *ar, struct sk_buff *skb)
{
        struct urb *urb;
        struct ar9170_stream *tx_stream;
        void *data;
        unsigned int len;

        if (!IS_STARTED(ar))
                goto err_drop;

        urb = usb_alloc_urb(0, GFP_ATOMIC);
        if (!urb)
                goto err_drop;

        if (ar->fw.tx_stream) {
                tx_stream = (void *) (skb->data - sizeof(*tx_stream));

                len = skb->len + sizeof(*tx_stream);
                tx_stream->length = cpu_to_le16(len);
                tx_stream->tag = cpu_to_le16(AR9170_TX_STREAM_TAG);
                data = tx_stream;
        } else {
                data = skb->data;
                len = skb->len;
        }

        usb_fill_bulk_urb(urb, ar->udev, usb_sndbulkpipe(ar->udev,
                AR9170_USB_EP_TX), data, len,
                carl9170_usb_tx_data_complete, skb);

        urb->transfer_flags |= URB_ZERO_PACKET;

        usb_anchor_urb(urb, &ar->tx_wait);

        usb_free_urb(urb);

        carl9170_usb_submit_data_urb(ar);
        return;

err_drop:
        carl9170_tx_drop(ar, skb);
        carl9170_tx_callback(ar, skb);
}

static void carl9170_release_firmware(struct ar9170 *ar)
{
        if (ar->fw.fw) {
                release_firmware(ar->fw.fw);
                memset(&ar->fw, 0, sizeof(ar->fw));
        }
}

void carl9170_usb_stop(struct ar9170 *ar)
{
        int ret;

        carl9170_set_state_when(ar, CARL9170_IDLE, CARL9170_STOPPED);

        ret = carl9170_usb_flush(ar);
        if (ret)
                dev_err(&ar->udev->dev, "kill pending tx urbs.\n");

        usb_poison_anchored_urbs(&ar->tx_anch);
        carl9170_usb_handle_tx_err(ar);

        /* kill any pending command */
        spin_lock_bh(&ar->cmd_lock);
        ar->readlen = 0;
        spin_unlock_bh(&ar->cmd_lock);
        complete_all(&ar->cmd_wait);

        /* This is required to prevent an early completion on _start */
        INIT_COMPLETION(ar->cmd_wait);

        /*
         * Note:
         * So far we freed all tx urbs, but we won't dare to touch any rx urbs.
         * Else we would end up with a unresponsive device...
         */
}

int carl9170_usb_open(struct ar9170 *ar)
{
        usb_unpoison_anchored_urbs(&ar->tx_anch);

        carl9170_set_state_when(ar, CARL9170_STOPPED, CARL9170_IDLE);
        return 0;
}

static int carl9170_usb_load_firmware(struct ar9170 *ar)
{
        const u8 *data;
        u8 *buf;
        unsigned int transfer;
        size_t len;
        u32 addr;
        int err = 0;

        buf = kmalloc(4096, GFP_KERNEL);
        if (!buf) {
                err = -ENOMEM;
                goto err_out;
        }

        data = ar->fw.fw->data;
        len = ar->fw.fw->size;
        addr = ar->fw.address;

        /* this removes the miniboot image */
        data += ar->fw.offset;
        len -= ar->fw.offset;

        while (len) {
                transfer = min_t(unsigned int, len, 4096u);
                memcpy(buf, data, transfer);

                err = usb_control_msg(ar->udev, usb_sndctrlpipe(ar->udev, 0),
                                      0x30 /* FW DL */, 0x40 | USB_DIR_OUT,
                                      addr >> 8, 0, buf, transfer, 100);

                if (err < 0) {
                        kfree(buf);
                        goto err_out;
                }

                len -= transfer;
                data += transfer;
                addr += transfer;
        }
        kfree(buf);

        err = usb_control_msg(ar->udev, usb_sndctrlpipe(ar->udev, 0),
                              0x31 /* FW DL COMPLETE */,
                              0x40 | USB_DIR_OUT, 0, 0, NULL, 0, 200);

        if (wait_for_completion_timeout(&ar->fw_boot_wait, HZ) == 0) {
                err = -ETIMEDOUT;
                goto err_out;
        }

        err = carl9170_echo_test(ar, 0x4a110123);
        if (err)
                goto err_out;

        /* now, start the command response counter */
        ar->cmd_seq = -1;

        return 0;

err_out:
        dev_err(&ar->udev->dev, "firmware upload failed (%d).\n", err);
        return err;
}

int carl9170_usb_restart(struct ar9170 *ar)
{
        int err = 0;

        if (ar->intf->condition != USB_INTERFACE_BOUND)
                return 0;

        /*
         * Disable the command response sequence counter check.
         * We already know that the device/firmware is in a bad state.
         * So, no extra points are awarded to anyone who reminds the
         * driver about that.
         */
        ar->cmd_seq = -2;

        err = carl9170_reboot(ar);

        carl9170_usb_stop(ar);

        if (err)
                goto err_out;

        tasklet_schedule(&ar->usb_tasklet);

        /* The reboot procedure can take quite a while to complete. */
        msleep(1100);

        err = carl9170_usb_open(ar);
        if (err)
                goto err_out;

        err = carl9170_usb_load_firmware(ar);
        if (err)
                goto err_out;

        return 0;

err_out:
        carl9170_usb_cancel_urbs(ar);
        return err;
}

void carl9170_usb_reset(struct ar9170 *ar)
{
        /*
         * This is the last resort to get the device going again
         * without any *user replugging action*.
         *
         * But there is a catch: usb_reset really is like a physical
         * *reconnect*. The mac80211 state will be lost in the process.
         * Therefore a userspace application, which is monitoring
         * the link must step in.
         */
        carl9170_usb_cancel_urbs(ar);

        carl9170_usb_stop(ar);

        usb_queue_reset_device(ar->intf);
}

static int carl9170_usb_init_device(struct ar9170 *ar)
{
        int err;

        /*
         * The carl9170 firmware let's the driver know when it's
         * ready for action. But we have to be prepared to gracefully
         * handle all spurious [flushed] messages after each (re-)boot.
         * Thus the command response counter remains disabled until it
         * can be safely synchronized.
         */
        ar->cmd_seq = -2;

        err = carl9170_usb_send_rx_irq_urb(ar);
        if (err)
                goto err_out;

        err = carl9170_usb_init_rx_bulk_urbs(ar);
        if (err)
                goto err_unrx;

        err = carl9170_usb_open(ar);
        if (err)
                goto err_unrx;

        mutex_lock(&ar->mutex);
        err = carl9170_usb_load_firmware(ar);
        mutex_unlock(&ar->mutex);
        if (err)
                goto err_stop;

        return 0;

err_stop:
        carl9170_usb_stop(ar);

err_unrx:
        carl9170_usb_cancel_urbs(ar);

err_out:
        return err;
}

static void carl9170_usb_firmware_failed(struct ar9170 *ar)
{
        struct device *parent = ar->udev->dev.parent;
        struct usb_device *udev;

        /*
         * Store a copy of the usb_device pointer locally.
         * This is because device_release_driver initiates
         * carl9170_usb_disconnect, which in turn frees our
         * driver context (ar).
         */
        udev = ar->udev;

        complete(&ar->fw_load_wait);

        /* unbind anything failed */
        if (parent)
                device_lock(parent);

        device_release_driver(&udev->dev);
        if (parent)
                device_unlock(parent);

        usb_put_dev(udev);
}

static void carl9170_usb_firmware_finish(struct ar9170 *ar)
{
        int err;

        err = carl9170_parse_firmware(ar);
        if (err)
                goto err_freefw;

        err = carl9170_usb_init_device(ar);
        if (err)
                goto err_freefw;

        err = carl9170_register(ar);

        carl9170_usb_stop(ar);
        if (err)
                goto err_unrx;

        complete(&ar->fw_load_wait);
        usb_put_dev(ar->udev);
        return;

err_unrx:
        carl9170_usb_cancel_urbs(ar);

err_freefw:
        carl9170_release_firmware(ar);
        carl9170_usb_firmware_failed(ar);
}

static void carl9170_usb_firmware_step2(const struct firmware *fw,
                                        void *context)
{
        struct ar9170 *ar = context;

        if (fw) {
                ar->fw.fw = fw;
                carl9170_usb_firmware_finish(ar);
                return;
        }

        dev_err(&ar->udev->dev, "firmware not found.\n");
        carl9170_usb_firmware_failed(ar);
}

static int carl9170_usb_probe(struct usb_interface *intf,
                              const struct usb_device_id *id)
{
        struct ar9170 *ar;
        struct usb_device *udev;
        int err;

        err = usb_reset_device(interface_to_usbdev(intf));
        if (err)
                return err;

        ar = carl9170_alloc(sizeof(*ar));
        if (IS_ERR(ar))
                return PTR_ERR(ar);

        udev = interface_to_usbdev(intf);
        usb_get_dev(udev);
        ar->udev = udev;
        ar->intf = intf;
        ar->features = id->driver_info;

        usb_set_intfdata(intf, ar);
        SET_IEEE80211_DEV(ar->hw, &intf->dev);

        init_usb_anchor(&ar->rx_anch);
        init_usb_anchor(&ar->rx_pool);
        init_usb_anchor(&ar->rx_work);
        init_usb_anchor(&ar->tx_wait);
        init_usb_anchor(&ar->tx_anch);
        init_usb_anchor(&ar->tx_cmd);
        init_usb_anchor(&ar->tx_err);
        init_completion(&ar->cmd_wait);
        init_completion(&ar->fw_boot_wait);
        init_completion(&ar->fw_load_wait);
        tasklet_init(&ar->usb_tasklet, carl9170_usb_tasklet,
                     (unsigned long)ar);

        atomic_set(&ar->tx_cmd_urbs, 0);
        atomic_set(&ar->tx_anch_urbs, 0);
        atomic_set(&ar->rx_work_urbs, 0);
        atomic_set(&ar->rx_anch_urbs, 0);
        atomic_set(&ar->rx_pool_urbs, 0);

        usb_get_dev(ar->udev);

        carl9170_set_state(ar, CARL9170_STOPPED);

        return request_firmware_nowait(THIS_MODULE, 1, CARL9170FW_NAME,
                &ar->udev->dev, GFP_KERNEL, ar, carl9170_usb_firmware_step2);
}

static void carl9170_usb_disconnect(struct usb_interface *intf)
{
        struct ar9170 *ar = usb_get_intfdata(intf);
        struct usb_device *udev;

        if (WARN_ON(!ar))
                return;

        udev = ar->udev;
        wait_for_completion(&ar->fw_load_wait);

        if (IS_INITIALIZED(ar)) {
                carl9170_reboot(ar);
                carl9170_usb_stop(ar);
        }

        carl9170_usb_cancel_urbs(ar);
        carl9170_unregister(ar);

        usb_set_intfdata(intf, NULL);

        carl9170_release_firmware(ar);
        carl9170_free(ar);
        usb_put_dev(udev);
}

#ifdef CONFIG_PM
static int carl9170_usb_suspend(struct usb_interface *intf,
                                pm_message_t message)
{
        struct ar9170 *ar = usb_get_intfdata(intf);

        if (!ar)
                return -ENODEV;

        carl9170_usb_cancel_urbs(ar);

        return 0;
}

static int carl9170_usb_resume(struct usb_interface *intf)
{
        struct ar9170 *ar = usb_get_intfdata(intf);
        int err;

        if (!ar)
                return -ENODEV;

        usb_unpoison_anchored_urbs(&ar->rx_anch);
        carl9170_set_state(ar, CARL9170_STOPPED);

        /*
         * The USB documentation demands that [for suspend] all traffic
         * to and from the device has to stop. This would be fine, but
         * there's a catch: the device[usb phy] does not come back.
         *
         * Upon resume the firmware will "kill" itself and the
         * boot-code sorts out the magic voodoo.
         * Not very nice, but there's not much what could go wrong.
         */
        msleep(1100);

        err = carl9170_usb_init_device(ar);
        if (err)
                goto err_unrx;

        return 0;

err_unrx:
        carl9170_usb_cancel_urbs(ar);

        return err;
}
#endif /* CONFIG_PM */

static struct usb_driver carl9170_driver = {
        .name = KBUILD_MODNAME,
        .probe = carl9170_usb_probe,
        .disconnect = carl9170_usb_disconnect,
        .id_table = carl9170_usb_ids,
        .soft_unbind = 1,
#ifdef CONFIG_PM
        .suspend = carl9170_usb_suspend,
        .resume = carl9170_usb_resume,
        .reset_resume = carl9170_usb_resume,
#endif /* CONFIG_PM */
};

static int __init carl9170_usb_init(void)
{
        return usb_register(&carl9170_driver);
}

static void __exit carl9170_usb_exit(void)
{
        usb_deregister(&carl9170_driver);
}

module_init(carl9170_usb_init);
module_exit(carl9170_usb_exit);