linux/drivers/net/wireless/rtlwifi/rtl8192de/hw.c
<<
>>
Prefs
   1/******************************************************************************
   2 *
   3 * Copyright(c) 2009-2010  Realtek Corporation.
   4 *
   5 * This program is free software; you can redistribute it and/or modify it
   6 * under the terms of version 2 of the GNU General Public License as
   7 * published by the Free Software Foundation.
   8 *
   9 * This program is distributed in the hope that it will be useful, but WITHOUT
  10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  11 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  12 * more details.
  13 *
  14 * You should have received a copy of the GNU General Public License along with
  15 * this program; if not, write to the Free Software Foundation, Inc.,
  16 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
  17 *
  18 * The full GNU General Public License is included in this distribution in the
  19 * file called LICENSE.
  20 *
  21 * Contact Information:
  22 * wlanfae <wlanfae@realtek.com>
  23 * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
  24 * Hsinchu 300, Taiwan.
  25 *
  26 * Larry Finger <Larry.Finger@lwfinger.net>
  27 *
  28 *****************************************************************************/
  29
  30#include "../wifi.h"
  31#include "../efuse.h"
  32#include "../base.h"
  33#include "../regd.h"
  34#include "../cam.h"
  35#include "../ps.h"
  36#include "../pci.h"
  37#include "reg.h"
  38#include "def.h"
  39#include "phy.h"
  40#include "dm.h"
  41#include "fw.h"
  42#include "led.h"
  43#include "sw.h"
  44#include "hw.h"
  45
  46u32 rtl92de_read_dword_dbi(struct ieee80211_hw *hw, u16 offset, u8 direct)
  47{
  48        struct rtl_priv *rtlpriv = rtl_priv(hw);
  49        u32 value;
  50
  51        rtl_write_word(rtlpriv, REG_DBI_CTRL, (offset & 0xFFC));
  52        rtl_write_byte(rtlpriv, REG_DBI_FLAG, BIT(1) | direct);
  53        udelay(10);
  54        value = rtl_read_dword(rtlpriv, REG_DBI_RDATA);
  55        return value;
  56}
  57
  58void rtl92de_write_dword_dbi(struct ieee80211_hw *hw,
  59                             u16 offset, u32 value, u8 direct)
  60{
  61        struct rtl_priv *rtlpriv = rtl_priv(hw);
  62
  63        rtl_write_word(rtlpriv, REG_DBI_CTRL, ((offset & 0xFFC) | 0xF000));
  64        rtl_write_dword(rtlpriv, REG_DBI_WDATA, value);
  65        rtl_write_byte(rtlpriv, REG_DBI_FLAG, BIT(0) | direct);
  66}
  67
  68static void _rtl92de_set_bcn_ctrl_reg(struct ieee80211_hw *hw,
  69                                      u8 set_bits, u8 clear_bits)
  70{
  71        struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
  72        struct rtl_priv *rtlpriv = rtl_priv(hw);
  73
  74        rtlpci->reg_bcn_ctrl_val |= set_bits;
  75        rtlpci->reg_bcn_ctrl_val &= ~clear_bits;
  76        rtl_write_byte(rtlpriv, REG_BCN_CTRL, (u8) rtlpci->reg_bcn_ctrl_val);
  77}
  78
  79static void _rtl92de_stop_tx_beacon(struct ieee80211_hw *hw)
  80{
  81        struct rtl_priv *rtlpriv = rtl_priv(hw);
  82        u8 tmp1byte;
  83
  84        tmp1byte = rtl_read_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 2);
  85        rtl_write_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 2, tmp1byte & (~BIT(6)));
  86        rtl_write_byte(rtlpriv, REG_BCN_MAX_ERR, 0xff);
  87        rtl_write_byte(rtlpriv, REG_TBTT_PROHIBIT + 1, 0x64);
  88        tmp1byte = rtl_read_byte(rtlpriv, REG_TBTT_PROHIBIT + 2);
  89        tmp1byte &= ~(BIT(0));
  90        rtl_write_byte(rtlpriv, REG_TBTT_PROHIBIT + 2, tmp1byte);
  91}
  92
  93static void _rtl92de_resume_tx_beacon(struct ieee80211_hw *hw)
  94{
  95        struct rtl_priv *rtlpriv = rtl_priv(hw);
  96        u8 tmp1byte;
  97
  98        tmp1byte = rtl_read_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 2);
  99        rtl_write_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 2, tmp1byte | BIT(6));
 100        rtl_write_byte(rtlpriv, REG_BCN_MAX_ERR, 0x0a);
 101        rtl_write_byte(rtlpriv, REG_TBTT_PROHIBIT + 1, 0xff);
 102        tmp1byte = rtl_read_byte(rtlpriv, REG_TBTT_PROHIBIT + 2);
 103        tmp1byte |= BIT(0);
 104        rtl_write_byte(rtlpriv, REG_TBTT_PROHIBIT + 2, tmp1byte);
 105}
 106
 107static void _rtl92de_enable_bcn_sub_func(struct ieee80211_hw *hw)
 108{
 109        _rtl92de_set_bcn_ctrl_reg(hw, 0, BIT(1));
 110}
 111
 112static void _rtl92de_disable_bcn_sub_func(struct ieee80211_hw *hw)
 113{
 114        _rtl92de_set_bcn_ctrl_reg(hw, BIT(1), 0);
 115}
 116
 117void rtl92de_get_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
 118{
 119        struct rtl_priv *rtlpriv = rtl_priv(hw);
 120        struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
 121        struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
 122
 123        switch (variable) {
 124        case HW_VAR_RCR:
 125                *((u32 *) (val)) = rtlpci->receive_config;
 126                break;
 127        case HW_VAR_RF_STATE:
 128                *((enum rf_pwrstate *)(val)) = ppsc->rfpwr_state;
 129                break;
 130        case HW_VAR_FWLPS_RF_ON:{
 131                enum rf_pwrstate rfState;
 132                u32 val_rcr;
 133
 134                rtlpriv->cfg->ops->get_hw_reg(hw, HW_VAR_RF_STATE,
 135                                              (u8 *) (&rfState));
 136                if (rfState == ERFOFF) {
 137                        *((bool *) (val)) = true;
 138                } else {
 139                        val_rcr = rtl_read_dword(rtlpriv, REG_RCR);
 140                        val_rcr &= 0x00070000;
 141                        if (val_rcr)
 142                                *((bool *) (val)) = false;
 143                        else
 144                                *((bool *) (val)) = true;
 145                }
 146                break;
 147        }
 148        case HW_VAR_FW_PSMODE_STATUS:
 149                *((bool *) (val)) = ppsc->fw_current_inpsmode;
 150                break;
 151        case HW_VAR_CORRECT_TSF:{
 152                u64 tsf;
 153                u32 *ptsf_low = (u32 *)&tsf;
 154                u32 *ptsf_high = ((u32 *)&tsf) + 1;
 155
 156                *ptsf_high = rtl_read_dword(rtlpriv, (REG_TSFTR + 4));
 157                *ptsf_low = rtl_read_dword(rtlpriv, REG_TSFTR);
 158                *((u64 *) (val)) = tsf;
 159                break;
 160        }
 161        case HW_VAR_INT_MIGRATION:
 162                *((bool *)(val)) = rtlpriv->dm.interrupt_migration;
 163                break;
 164        case HW_VAR_INT_AC:
 165                *((bool *)(val)) = rtlpriv->dm.disable_tx_int;
 166                break;
 167        default:
 168                RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
 169                         ("switch case not process\n"));
 170                break;
 171        }
 172}
 173
 174void rtl92de_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
 175{
 176        struct rtl_priv *rtlpriv = rtl_priv(hw);
 177        struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
 178        struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
 179        struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
 180        struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
 181        struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
 182        u8 idx;
 183
 184        switch (variable) {
 185        case HW_VAR_ETHER_ADDR:
 186                for (idx = 0; idx < ETH_ALEN; idx++) {
 187                        rtl_write_byte(rtlpriv, (REG_MACID + idx),
 188                                       val[idx]);
 189                }
 190                break;
 191        case HW_VAR_BASIC_RATE: {
 192                u16 rate_cfg = ((u16 *) val)[0];
 193                u8 rate_index = 0;
 194
 195                rate_cfg = rate_cfg & 0x15f;
 196                if (mac->vendor == PEER_CISCO &&
 197                    ((rate_cfg & 0x150) == 0))
 198                        rate_cfg |= 0x01;
 199                rtl_write_byte(rtlpriv, REG_RRSR, rate_cfg & 0xff);
 200                rtl_write_byte(rtlpriv, REG_RRSR + 1,
 201                               (rate_cfg >> 8) & 0xff);
 202                while (rate_cfg > 0x1) {
 203                        rate_cfg = (rate_cfg >> 1);
 204                        rate_index++;
 205                }
 206                if (rtlhal->fw_version > 0xe)
 207                        rtl_write_byte(rtlpriv, REG_INIRTS_RATE_SEL,
 208                                       rate_index);
 209                break;
 210        }
 211        case HW_VAR_BSSID:
 212                for (idx = 0; idx < ETH_ALEN; idx++) {
 213                        rtl_write_byte(rtlpriv, (REG_BSSID + idx),
 214                                       val[idx]);
 215                }
 216                break;
 217        case HW_VAR_SIFS:
 218                rtl_write_byte(rtlpriv, REG_SIFS_CTX + 1, val[0]);
 219                rtl_write_byte(rtlpriv, REG_SIFS_TRX + 1, val[1]);
 220                rtl_write_byte(rtlpriv, REG_SPEC_SIFS + 1, val[0]);
 221                rtl_write_byte(rtlpriv, REG_MAC_SPEC_SIFS + 1, val[0]);
 222                if (!mac->ht_enable)
 223                        rtl_write_word(rtlpriv, REG_RESP_SIFS_OFDM,
 224                                       0x0e0e);
 225                else
 226                        rtl_write_word(rtlpriv, REG_RESP_SIFS_OFDM,
 227                                       *((u16 *) val));
 228                break;
 229        case HW_VAR_SLOT_TIME: {
 230                u8 e_aci;
 231
 232                RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD,
 233                         ("HW_VAR_SLOT_TIME %x\n", val[0]));
 234                rtl_write_byte(rtlpriv, REG_SLOT, val[0]);
 235                for (e_aci = 0; e_aci < AC_MAX; e_aci++)
 236                        rtlpriv->cfg->ops->set_hw_reg(hw,
 237                                                      HW_VAR_AC_PARAM,
 238                                                      (u8 *) (&e_aci));
 239                break;
 240        }
 241        case HW_VAR_ACK_PREAMBLE: {
 242                u8 reg_tmp;
 243                u8 short_preamble = (bool) (*(u8 *) val);
 244
 245                reg_tmp = (mac->cur_40_prime_sc) << 5;
 246                if (short_preamble)
 247                        reg_tmp |= 0x80;
 248                rtl_write_byte(rtlpriv, REG_RRSR + 2, reg_tmp);
 249                break;
 250        }
 251        case HW_VAR_AMPDU_MIN_SPACE: {
 252                u8 min_spacing_to_set;
 253                u8 sec_min_space;
 254
 255                min_spacing_to_set = *((u8 *) val);
 256                if (min_spacing_to_set <= 7) {
 257                        sec_min_space = 0;
 258                        if (min_spacing_to_set < sec_min_space)
 259                                min_spacing_to_set = sec_min_space;
 260                        mac->min_space_cfg = ((mac->min_space_cfg & 0xf8) |
 261                                              min_spacing_to_set);
 262                        *val = min_spacing_to_set;
 263                        RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD,
 264                                 ("Set HW_VAR_AMPDU_MIN_SPACE: %#x\n",
 265                                 mac->min_space_cfg));
 266                        rtl_write_byte(rtlpriv, REG_AMPDU_MIN_SPACE,
 267                                       mac->min_space_cfg);
 268                }
 269                break;
 270        }
 271        case HW_VAR_SHORTGI_DENSITY: {
 272                u8 density_to_set;
 273
 274                density_to_set = *((u8 *) val);
 275                mac->min_space_cfg = rtlpriv->rtlhal.minspace_cfg;
 276                mac->min_space_cfg |= (density_to_set << 3);
 277                RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD,
 278                         ("Set HW_VAR_SHORTGI_DENSITY: %#x\n",
 279                         mac->min_space_cfg));
 280                rtl_write_byte(rtlpriv, REG_AMPDU_MIN_SPACE,
 281                               mac->min_space_cfg);
 282                break;
 283        }
 284        case HW_VAR_AMPDU_FACTOR: {
 285                u8 factor_toset;
 286                u32 regtoSet;
 287                u8 *ptmp_byte = NULL;
 288                u8 index;
 289
 290                if (rtlhal->macphymode == DUALMAC_DUALPHY)
 291                        regtoSet = 0xb9726641;
 292                else if (rtlhal->macphymode == DUALMAC_SINGLEPHY)
 293                        regtoSet = 0x66626641;
 294                else
 295                        regtoSet = 0xb972a841;
 296                factor_toset = *((u8 *) val);
 297                if (factor_toset <= 3) {
 298                        factor_toset = (1 << (factor_toset + 2));
 299                        if (factor_toset > 0xf)
 300                                factor_toset = 0xf;
 301                        for (index = 0; index < 4; index++) {
 302                                ptmp_byte = (u8 *) (&regtoSet) + index;
 303                                if ((*ptmp_byte & 0xf0) >
 304                                    (factor_toset << 4))
 305                                        *ptmp_byte = (*ptmp_byte & 0x0f)
 306                                                 | (factor_toset << 4);
 307                                if ((*ptmp_byte & 0x0f) > factor_toset)
 308                                        *ptmp_byte = (*ptmp_byte & 0xf0)
 309                                                     | (factor_toset);
 310                        }
 311                        rtl_write_dword(rtlpriv, REG_AGGLEN_LMT, regtoSet);
 312                        RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD,
 313                                 ("Set HW_VAR_AMPDU_FACTOR: %#x\n",
 314                                 factor_toset));
 315                }
 316                break;
 317        }
 318        case HW_VAR_AC_PARAM: {
 319                u8 e_aci = *((u8 *) val);
 320                rtl92d_dm_init_edca_turbo(hw);
 321                if (rtlpci->acm_method != eAcmWay2_SW)
 322                        rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_ACM_CTRL,
 323                                                      (u8 *) (&e_aci));
 324                break;
 325        }
 326        case HW_VAR_ACM_CTRL: {
 327                u8 e_aci = *((u8 *) val);
 328                union aci_aifsn *p_aci_aifsn =
 329                    (union aci_aifsn *)(&(mac->ac[0].aifs));
 330                u8 acm = p_aci_aifsn->f.acm;
 331                u8 acm_ctrl = rtl_read_byte(rtlpriv, REG_ACMHWCTRL);
 332
 333                acm_ctrl = acm_ctrl | ((rtlpci->acm_method == 2) ?  0x0 : 0x1);
 334                if (acm) {
 335                        switch (e_aci) {
 336                        case AC0_BE:
 337                                acm_ctrl |= ACMHW_BEQEN;
 338                                break;
 339                        case AC2_VI:
 340                                acm_ctrl |= ACMHW_VIQEN;
 341                                break;
 342                        case AC3_VO:
 343                                acm_ctrl |= ACMHW_VOQEN;
 344                                break;
 345                        default:
 346                                RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
 347                                         ("HW_VAR_ACM_CTRL acm set "
 348                                         "failed: eACI is %d\n", acm));
 349                                break;
 350                        }
 351                } else {
 352                        switch (e_aci) {
 353                        case AC0_BE:
 354                                acm_ctrl &= (~ACMHW_BEQEN);
 355                                break;
 356                        case AC2_VI:
 357                                acm_ctrl &= (~ACMHW_VIQEN);
 358                                break;
 359                        case AC3_VO:
 360                                acm_ctrl &= (~ACMHW_VOQEN);
 361                                break;
 362                        default:
 363                                RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
 364                                         ("switch case not process\n"));
 365                                break;
 366                        }
 367                }
 368                RT_TRACE(rtlpriv, COMP_QOS, DBG_TRACE,
 369                         ("SetHwReg8190pci(): [HW_VAR_ACM_CTRL] "
 370                         "Write 0x%X\n", acm_ctrl));
 371                rtl_write_byte(rtlpriv, REG_ACMHWCTRL, acm_ctrl);
 372                break;
 373        }
 374        case HW_VAR_RCR:
 375                rtl_write_dword(rtlpriv, REG_RCR, ((u32 *) (val))[0]);
 376                rtlpci->receive_config = ((u32 *) (val))[0];
 377                break;
 378        case HW_VAR_RETRY_LIMIT: {
 379                u8 retry_limit = ((u8 *) (val))[0];
 380
 381                rtl_write_word(rtlpriv, REG_RL,
 382                               retry_limit << RETRY_LIMIT_SHORT_SHIFT |
 383                               retry_limit << RETRY_LIMIT_LONG_SHIFT);
 384                break;
 385        }
 386        case HW_VAR_DUAL_TSF_RST:
 387                rtl_write_byte(rtlpriv, REG_DUAL_TSF_RST, (BIT(0) | BIT(1)));
 388                break;
 389        case HW_VAR_EFUSE_BYTES:
 390                rtlefuse->efuse_usedbytes = *((u16 *) val);
 391                break;
 392        case HW_VAR_EFUSE_USAGE:
 393                rtlefuse->efuse_usedpercentage = *((u8 *) val);
 394                break;
 395        case HW_VAR_IO_CMD:
 396                rtl92d_phy_set_io_cmd(hw, (*(enum io_type *)val));
 397                break;
 398        case HW_VAR_WPA_CONFIG:
 399                rtl_write_byte(rtlpriv, REG_SECCFG, *((u8 *) val));
 400                break;
 401        case HW_VAR_SET_RPWM:
 402                rtl92d_fill_h2c_cmd(hw, H2C_PWRM, 1, (u8 *) (val));
 403                break;
 404        case HW_VAR_H2C_FW_PWRMODE:
 405                break;
 406        case HW_VAR_FW_PSMODE_STATUS:
 407                ppsc->fw_current_inpsmode = *((bool *) val);
 408                break;
 409        case HW_VAR_H2C_FW_JOINBSSRPT: {
 410                u8 mstatus = (*(u8 *) val);
 411                u8 tmp_regcr, tmp_reg422;
 412                bool recover = false;
 413
 414                if (mstatus == RT_MEDIA_CONNECT) {
 415                        rtlpriv->cfg->ops->set_hw_reg(hw,
 416                                                      HW_VAR_AID, NULL);
 417                        tmp_regcr = rtl_read_byte(rtlpriv, REG_CR + 1);
 418                        rtl_write_byte(rtlpriv, REG_CR + 1,
 419                                       (tmp_regcr | BIT(0)));
 420                        _rtl92de_set_bcn_ctrl_reg(hw, 0, BIT(3));
 421                        _rtl92de_set_bcn_ctrl_reg(hw, BIT(4), 0);
 422                        tmp_reg422 = rtl_read_byte(rtlpriv,
 423                                                 REG_FWHW_TXQ_CTRL + 2);
 424                        if (tmp_reg422 & BIT(6))
 425                                recover = true;
 426                        rtl_write_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 2,
 427                                       tmp_reg422 & (~BIT(6)));
 428                        rtl92d_set_fw_rsvdpagepkt(hw, 0);
 429                        _rtl92de_set_bcn_ctrl_reg(hw, BIT(3), 0);
 430                        _rtl92de_set_bcn_ctrl_reg(hw, 0, BIT(4));
 431                        if (recover)
 432                                rtl_write_byte(rtlpriv,
 433                                               REG_FWHW_TXQ_CTRL + 2,
 434                                               tmp_reg422);
 435                        rtl_write_byte(rtlpriv, REG_CR + 1,
 436                                       (tmp_regcr & ~(BIT(0))));
 437                }
 438                rtl92d_set_fw_joinbss_report_cmd(hw, (*(u8 *) val));
 439                break;
 440        }
 441        case HW_VAR_AID: {
 442                u16 u2btmp;
 443                u2btmp = rtl_read_word(rtlpriv, REG_BCN_PSR_RPT);
 444                u2btmp &= 0xC000;
 445                rtl_write_word(rtlpriv, REG_BCN_PSR_RPT, (u2btmp |
 446                               mac->assoc_id));
 447                break;
 448        }
 449        case HW_VAR_CORRECT_TSF: {
 450                u8 btype_ibss = ((u8 *) (val))[0];
 451
 452                if (btype_ibss)
 453                        _rtl92de_stop_tx_beacon(hw);
 454                _rtl92de_set_bcn_ctrl_reg(hw, 0, BIT(3));
 455                rtl_write_dword(rtlpriv, REG_TSFTR,
 456                                (u32) (mac->tsf & 0xffffffff));
 457                rtl_write_dword(rtlpriv, REG_TSFTR + 4,
 458                                (u32) ((mac->tsf >> 32) & 0xffffffff));
 459                _rtl92de_set_bcn_ctrl_reg(hw, BIT(3), 0);
 460                if (btype_ibss)
 461                        _rtl92de_resume_tx_beacon(hw);
 462
 463                break;
 464        }
 465        case HW_VAR_INT_MIGRATION: {
 466                bool int_migration = *(bool *) (val);
 467
 468                if (int_migration) {
 469                        /* Set interrrupt migration timer and
 470                         * corresponging Tx/Rx counter.
 471                         * timer 25ns*0xfa0=100us for 0xf packets.
 472                         * 0x306:Rx, 0x307:Tx */
 473                        rtl_write_dword(rtlpriv, REG_INT_MIG, 0xfe000fa0);
 474                        rtlpriv->dm.interrupt_migration = int_migration;
 475                } else {
 476                        /* Reset all interrupt migration settings. */
 477                        rtl_write_dword(rtlpriv, REG_INT_MIG, 0);
 478                        rtlpriv->dm.interrupt_migration = int_migration;
 479                }
 480                break;
 481        }
 482        case HW_VAR_INT_AC: {
 483                bool disable_ac_int = *((bool *) val);
 484
 485                /* Disable four ACs interrupts. */
 486                if (disable_ac_int) {
 487                        /* Disable VO, VI, BE and BK four AC interrupts
 488                         * to gain more efficient CPU utilization.
 489                         * When extremely highly Rx OK occurs,
 490                         * we will disable Tx interrupts.
 491                         */
 492                        rtlpriv->cfg->ops->update_interrupt_mask(hw, 0,
 493                                                 RT_AC_INT_MASKS);
 494                        rtlpriv->dm.disable_tx_int = disable_ac_int;
 495                /* Enable four ACs interrupts. */
 496                } else {
 497                        rtlpriv->cfg->ops->update_interrupt_mask(hw,
 498                                                 RT_AC_INT_MASKS, 0);
 499                        rtlpriv->dm.disable_tx_int = disable_ac_int;
 500                }
 501                break;
 502        }
 503        default:
 504                RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
 505                         ("switch case not process\n"));
 506                break;
 507        }
 508}
 509
 510static bool _rtl92de_llt_write(struct ieee80211_hw *hw, u32 address, u32 data)
 511{
 512        struct rtl_priv *rtlpriv = rtl_priv(hw);
 513        bool status = true;
 514        long count = 0;
 515        u32 value = _LLT_INIT_ADDR(address) |
 516            _LLT_INIT_DATA(data) | _LLT_OP(_LLT_WRITE_ACCESS);
 517
 518        rtl_write_dword(rtlpriv, REG_LLT_INIT, value);
 519        do {
 520                value = rtl_read_dword(rtlpriv, REG_LLT_INIT);
 521                if (_LLT_NO_ACTIVE == _LLT_OP_VALUE(value))
 522                        break;
 523                if (count > POLLING_LLT_THRESHOLD) {
 524                        RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
 525                                 ("Failed to polling write LLT done at "
 526                                  "address %d!\n", address));
 527                        status = false;
 528                        break;
 529                }
 530        } while (++count);
 531        return status;
 532}
 533
 534static bool _rtl92de_llt_table_init(struct ieee80211_hw *hw)
 535{
 536        struct rtl_priv *rtlpriv = rtl_priv(hw);
 537        unsigned short i;
 538        u8 txpktbuf_bndy;
 539        u8 maxPage;
 540        bool status;
 541        u32 value32; /* High+low page number */
 542        u8 value8;       /* normal page number */
 543
 544        if (rtlpriv->rtlhal.macphymode == SINGLEMAC_SINGLEPHY) {
 545                maxPage = 255;
 546                txpktbuf_bndy = 246;
 547                value8 = 0;
 548                value32 = 0x80bf0d29;
 549        } else if (rtlpriv->rtlhal.macphymode != SINGLEMAC_SINGLEPHY) {
 550                maxPage = 127;
 551                txpktbuf_bndy = 123;
 552                value8 = 0;
 553                value32 = 0x80750005;
 554        }
 555
 556        /* Set reserved page for each queue */
 557        /* 11.  RQPN 0x200[31:0] = 0x80BD1C1C */
 558        /* load RQPN */
 559        rtl_write_byte(rtlpriv, REG_RQPN_NPQ, value8);
 560        rtl_write_dword(rtlpriv, REG_RQPN, value32);
 561
 562        /* 12.  TXRKTBUG_PG_BNDY 0x114[31:0] = 0x27FF00F6 */
 563        /* TXRKTBUG_PG_BNDY */
 564        rtl_write_dword(rtlpriv, REG_TRXFF_BNDY,
 565                        (rtl_read_word(rtlpriv, REG_TRXFF_BNDY + 2) << 16 |
 566                        txpktbuf_bndy));
 567
 568        /* 13.  TDECTRL[15:8] 0x209[7:0] = 0xF6 */
 569        /* Beacon Head for TXDMA */
 570        rtl_write_byte(rtlpriv, REG_TDECTRL + 1, txpktbuf_bndy);
 571
 572        /* 14.  BCNQ_PGBNDY 0x424[7:0] =  0xF6 */
 573        /* BCNQ_PGBNDY */
 574        rtl_write_byte(rtlpriv, REG_TXPKTBUF_BCNQ_BDNY, txpktbuf_bndy);
 575        rtl_write_byte(rtlpriv, REG_TXPKTBUF_MGQ_BDNY, txpktbuf_bndy);
 576
 577        /* 15.  WMAC_LBK_BF_HD 0x45D[7:0] =  0xF6 */
 578        /* WMAC_LBK_BF_HD */
 579        rtl_write_byte(rtlpriv, 0x45D, txpktbuf_bndy);
 580
 581        /* Set Tx/Rx page size (Tx must be 128 Bytes, */
 582        /* Rx can be 64,128,256,512,1024 bytes) */
 583        /* 16.  PBP [7:0] = 0x11 */
 584        /* TRX page size */
 585        rtl_write_byte(rtlpriv, REG_PBP, 0x11);
 586
 587        /* 17.  DRV_INFO_SZ = 0x04 */
 588        rtl_write_byte(rtlpriv, REG_RX_DRVINFO_SZ, 0x4);
 589
 590        /* 18.  LLT_table_init(Adapter);  */
 591        for (i = 0; i < (txpktbuf_bndy - 1); i++) {
 592                status = _rtl92de_llt_write(hw, i, i + 1);
 593                if (true != status)
 594                        return status;
 595        }
 596
 597        /* end of list */
 598        status = _rtl92de_llt_write(hw, (txpktbuf_bndy - 1), 0xFF);
 599        if (true != status)
 600                return status;
 601
 602        /* Make the other pages as ring buffer */
 603        /* This ring buffer is used as beacon buffer if we */
 604        /* config this MAC as two MAC transfer. */
 605        /* Otherwise used as local loopback buffer.  */
 606        for (i = txpktbuf_bndy; i < maxPage; i++) {
 607                status = _rtl92de_llt_write(hw, i, (i + 1));
 608                if (true != status)
 609                        return status;
 610        }
 611
 612        /* Let last entry point to the start entry of ring buffer */
 613        status = _rtl92de_llt_write(hw, maxPage, txpktbuf_bndy);
 614        if (true != status)
 615                return status;
 616
 617        return true;
 618}
 619
 620static void _rtl92de_gen_refresh_led_state(struct ieee80211_hw *hw)
 621{
 622        struct rtl_pci_priv *pcipriv = rtl_pcipriv(hw);
 623        struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
 624        struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
 625        struct rtl_led *pLed0 = &(pcipriv->ledctl.sw_led0);
 626
 627        if (rtlpci->up_first_time)
 628                return;
 629        if (ppsc->rfoff_reason == RF_CHANGE_BY_IPS)
 630                rtl92de_sw_led_on(hw, pLed0);
 631        else if (ppsc->rfoff_reason == RF_CHANGE_BY_INIT)
 632                rtl92de_sw_led_on(hw, pLed0);
 633        else
 634                rtl92de_sw_led_off(hw, pLed0);
 635}
 636
 637static bool _rtl92de_init_mac(struct ieee80211_hw *hw)
 638{
 639        struct rtl_priv *rtlpriv = rtl_priv(hw);
 640        struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
 641        unsigned char bytetmp;
 642        unsigned short wordtmp;
 643        u16 retry;
 644
 645        rtl92d_phy_set_poweron(hw);
 646        /* Add for resume sequence of power domain according
 647         * to power document V11. Chapter V.11....  */
 648        /* 0.   RSV_CTRL 0x1C[7:0] = 0x00  */
 649        /* unlock ISO/CLK/Power control register */
 650        rtl_write_byte(rtlpriv, REG_RSV_CTRL, 0x00);
 651        rtl_write_byte(rtlpriv, REG_LDOA15_CTRL, 0x05);
 652
 653        /* 1.   AFE_XTAL_CTRL [7:0] = 0x0F  enable XTAL */
 654        /* 2.   SPS0_CTRL 0x11[7:0] = 0x2b  enable SPS into PWM mode  */
 655        /* 3.   delay (1ms) this is not necessary when initially power on */
 656
 657        /* C.   Resume Sequence */
 658        /* a.   SPS0_CTRL 0x11[7:0] = 0x2b */
 659        rtl_write_byte(rtlpriv, REG_SPS0_CTRL, 0x2b);
 660
 661        /* b.   AFE_XTAL_CTRL [7:0] = 0x0F */
 662        rtl_write_byte(rtlpriv, REG_AFE_XTAL_CTRL, 0x0F);
 663
 664        /* c.   DRV runs power on init flow */
 665
 666        /* auto enable WLAN */
 667        /* 4.   APS_FSMCO 0x04[8] = 1; wait till 0x04[8] = 0   */
 668        /* Power On Reset for MAC Block */
 669        bytetmp = rtl_read_byte(rtlpriv, REG_APS_FSMCO + 1) | BIT(0);
 670        udelay(2);
 671        rtl_write_byte(rtlpriv, REG_APS_FSMCO + 1, bytetmp);
 672        udelay(2);
 673
 674        /* 5.   Wait while 0x04[8] == 0 goto 2, otherwise goto 1 */
 675        bytetmp = rtl_read_byte(rtlpriv, REG_APS_FSMCO + 1);
 676        udelay(50);
 677        retry = 0;
 678        while ((bytetmp & BIT(0)) && retry < 1000) {
 679                retry++;
 680                bytetmp = rtl_read_byte(rtlpriv, REG_APS_FSMCO + 1);
 681                udelay(50);
 682        }
 683
 684        /* Enable Radio off, GPIO, and LED function */
 685        /* 6.   APS_FSMCO 0x04[15:0] = 0x0012  when enable HWPDN */
 686        rtl_write_word(rtlpriv, REG_APS_FSMCO, 0x1012);
 687
 688        /* release RF digital isolation  */
 689        /* 7.  SYS_ISO_CTRL 0x01[1]    = 0x0;  */
 690        /*Set REG_SYS_ISO_CTRL 0x1=0x82 to prevent wake# problem. */
 691        rtl_write_byte(rtlpriv, REG_SYS_ISO_CTRL + 1, 0x82);
 692        udelay(2);
 693
 694        /* make sure that BB reset OK. */
 695        /* rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN, 0xE3); */
 696
 697        /* Disable REG_CR before enable it to assure reset */
 698        rtl_write_word(rtlpriv, REG_CR, 0x0);
 699
 700        /* Release MAC IO register reset */
 701        rtl_write_word(rtlpriv, REG_CR, 0x2ff);
 702
 703        /* clear stopping tx/rx dma   */
 704        rtl_write_byte(rtlpriv, REG_PCIE_CTRL_REG + 1, 0x0);
 705
 706        /* rtl_write_word(rtlpriv,REG_CR+2, 0x2); */
 707
 708        /* System init */
 709        /* 18.  LLT_table_init(Adapter);  */
 710        if (_rtl92de_llt_table_init(hw) == false)
 711                return false;
 712
 713        /* Clear interrupt and enable interrupt */
 714        /* 19.  HISR 0x124[31:0] = 0xffffffff;  */
 715        /*      HISRE 0x12C[7:0] = 0xFF */
 716        rtl_write_dword(rtlpriv, REG_HISR, 0xffffffff);
 717        rtl_write_byte(rtlpriv, REG_HISRE, 0xff);
 718
 719        /* 20.  HIMR 0x120[31:0] |= [enable INT mask bit map];  */
 720        /* 21.  HIMRE 0x128[7:0] = [enable INT mask bit map] */
 721        /* The IMR should be enabled later after all init sequence
 722         * is finished. */
 723
 724        /* 22.  PCIE configuration space configuration */
 725        /* 23.  Ensure PCIe Device 0x80[15:0] = 0x0143 (ASPM+CLKREQ),  */
 726        /*      and PCIe gated clock function is enabled.    */
 727        /* PCIE configuration space will be written after
 728         * all init sequence.(Or by BIOS) */
 729
 730        rtl92d_phy_config_maccoexist_rfpage(hw);
 731
 732        /* THe below section is not related to power document Vxx . */
 733        /* This is only useful for driver and OS setting. */
 734        /* -------------------Software Relative Setting---------------------- */
 735        wordtmp = rtl_read_word(rtlpriv, REG_TRXDMA_CTRL);
 736        wordtmp &= 0xf;
 737        wordtmp |= 0xF771;
 738        rtl_write_word(rtlpriv, REG_TRXDMA_CTRL, wordtmp);
 739
 740        /* Reported Tx status from HW for rate adaptive. */
 741        /* This should be realtive to power on step 14. But in document V11  */
 742        /* still not contain the description.!!! */
 743        rtl_write_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 1, 0x1F);
 744
 745        /* Set Tx/Rx page size (Tx must be 128 Bytes,
 746         * Rx can be 64,128,256,512,1024 bytes) */
 747        /* rtl_write_byte(rtlpriv,REG_PBP, 0x11); */
 748
 749        /* Set RCR register */
 750        rtl_write_dword(rtlpriv, REG_RCR, rtlpci->receive_config);
 751        /* rtl_write_byte(rtlpriv,REG_RX_DRVINFO_SZ, 4); */
 752
 753        /*  Set TCR register */
 754        rtl_write_dword(rtlpriv, REG_TCR, rtlpci->transmit_config);
 755
 756        /* disable earlymode */
 757        rtl_write_byte(rtlpriv, 0x4d0, 0x0);
 758
 759        /* Set TX/RX descriptor physical address(from OS API). */
 760        rtl_write_dword(rtlpriv, REG_BCNQ_DESA,
 761                        rtlpci->tx_ring[BEACON_QUEUE].dma);
 762        rtl_write_dword(rtlpriv, REG_MGQ_DESA, rtlpci->tx_ring[MGNT_QUEUE].dma);
 763        rtl_write_dword(rtlpriv, REG_VOQ_DESA, rtlpci->tx_ring[VO_QUEUE].dma);
 764        rtl_write_dword(rtlpriv, REG_VIQ_DESA, rtlpci->tx_ring[VI_QUEUE].dma);
 765        rtl_write_dword(rtlpriv, REG_BEQ_DESA, rtlpci->tx_ring[BE_QUEUE].dma);
 766        rtl_write_dword(rtlpriv, REG_BKQ_DESA, rtlpci->tx_ring[BK_QUEUE].dma);
 767        rtl_write_dword(rtlpriv, REG_HQ_DESA, rtlpci->tx_ring[HIGH_QUEUE].dma);
 768        /* Set RX Desc Address */
 769        rtl_write_dword(rtlpriv, REG_RX_DESA,
 770                        rtlpci->rx_ring[RX_MPDU_QUEUE].dma);
 771
 772        /* if we want to support 64 bit DMA, we should set it here,
 773         * but now we do not support 64 bit DMA*/
 774
 775        rtl_write_byte(rtlpriv, REG_PCIE_CTRL_REG + 3, 0x33);
 776
 777        /* Reset interrupt migration setting when initialization */
 778        rtl_write_dword(rtlpriv, REG_INT_MIG, 0);
 779
 780        /* Reconsider when to do this operation after asking HWSD. */
 781        bytetmp = rtl_read_byte(rtlpriv, REG_APSD_CTRL);
 782        rtl_write_byte(rtlpriv, REG_APSD_CTRL, bytetmp & ~BIT(6));
 783        do {
 784                retry++;
 785                bytetmp = rtl_read_byte(rtlpriv, REG_APSD_CTRL);
 786        } while ((retry < 200) && !(bytetmp & BIT(7)));
 787
 788        /* After MACIO reset,we must refresh LED state. */
 789        _rtl92de_gen_refresh_led_state(hw);
 790
 791        /* Reset H2C protection register */
 792        rtl_write_dword(rtlpriv, REG_MCUTST_1, 0x0);
 793
 794        return true;
 795}
 796
 797static void _rtl92de_hw_configure(struct ieee80211_hw *hw)
 798{
 799        struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
 800        struct rtl_priv *rtlpriv = rtl_priv(hw);
 801        struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
 802        u8 reg_bw_opmode = BW_OPMODE_20MHZ;
 803        u32 reg_rrsr;
 804
 805        reg_rrsr = RATE_ALL_CCK | RATE_ALL_OFDM_AG;
 806        rtl_write_byte(rtlpriv, REG_INIRTS_RATE_SEL, 0x8);
 807        rtl_write_byte(rtlpriv, REG_BWOPMODE, reg_bw_opmode);
 808        rtl_write_dword(rtlpriv, REG_RRSR, reg_rrsr);
 809        rtl_write_byte(rtlpriv, REG_SLOT, 0x09);
 810        rtl_write_byte(rtlpriv, REG_AMPDU_MIN_SPACE, 0x0);
 811        rtl_write_word(rtlpriv, REG_FWHW_TXQ_CTRL, 0x1F80);
 812        rtl_write_word(rtlpriv, REG_RL, 0x0707);
 813        rtl_write_dword(rtlpriv, REG_BAR_MODE_CTRL, 0x02012802);
 814        rtl_write_byte(rtlpriv, REG_HWSEQ_CTRL, 0xFF);
 815        rtl_write_dword(rtlpriv, REG_DARFRC, 0x01000000);
 816        rtl_write_dword(rtlpriv, REG_DARFRC + 4, 0x07060504);
 817        rtl_write_dword(rtlpriv, REG_RARFRC, 0x01000000);
 818        rtl_write_dword(rtlpriv, REG_RARFRC + 4, 0x07060504);
 819        /* Aggregation threshold */
 820        if (rtlhal->macphymode == DUALMAC_DUALPHY)
 821                rtl_write_dword(rtlpriv, REG_AGGLEN_LMT, 0xb9726641);
 822        else if (rtlhal->macphymode == DUALMAC_SINGLEPHY)
 823                rtl_write_dword(rtlpriv, REG_AGGLEN_LMT, 0x66626641);
 824        else
 825                rtl_write_dword(rtlpriv, REG_AGGLEN_LMT, 0xb972a841);
 826        rtl_write_byte(rtlpriv, REG_ATIMWND, 0x2);
 827        rtl_write_byte(rtlpriv, REG_BCN_MAX_ERR, 0x0a);
 828        rtlpci->reg_bcn_ctrl_val = 0x1f;
 829        rtl_write_byte(rtlpriv, REG_BCN_CTRL, rtlpci->reg_bcn_ctrl_val);
 830        rtl_write_byte(rtlpriv, REG_TBTT_PROHIBIT + 1, 0xff);
 831        rtl_write_byte(rtlpriv, REG_PIFS, 0x1C);
 832        rtl_write_byte(rtlpriv, REG_AGGR_BREAK_TIME, 0x16);
 833        rtl_write_word(rtlpriv, REG_NAV_PROT_LEN, 0x0020);
 834        /* For throughput */
 835        rtl_write_word(rtlpriv, REG_FAST_EDCA_CTRL, 0x6666);
 836        /* ACKTO for IOT issue. */
 837        rtl_write_byte(rtlpriv, REG_ACKTO, 0x40);
 838        /* Set Spec SIFS (used in NAV) */
 839        rtl_write_word(rtlpriv, REG_SPEC_SIFS, 0x1010);
 840        rtl_write_word(rtlpriv, REG_MAC_SPEC_SIFS, 0x1010);
 841        /* Set SIFS for CCK */
 842        rtl_write_word(rtlpriv, REG_SIFS_CTX, 0x1010);
 843        /* Set SIFS for OFDM */
 844        rtl_write_word(rtlpriv, REG_SIFS_TRX, 0x1010);
 845        /* Set Multicast Address. */
 846        rtl_write_dword(rtlpriv, REG_MAR, 0xffffffff);
 847        rtl_write_dword(rtlpriv, REG_MAR + 4, 0xffffffff);
 848        switch (rtlpriv->phy.rf_type) {
 849        case RF_1T2R:
 850        case RF_1T1R:
 851                rtlhal->minspace_cfg = (MAX_MSS_DENSITY_1T << 3);
 852                break;
 853        case RF_2T2R:
 854        case RF_2T2R_GREEN:
 855                rtlhal->minspace_cfg = (MAX_MSS_DENSITY_2T << 3);
 856                break;
 857        }
 858}
 859
 860static void _rtl92de_enable_aspm_back_door(struct ieee80211_hw *hw)
 861{
 862        struct rtl_priv *rtlpriv = rtl_priv(hw);
 863        struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
 864
 865        rtl_write_byte(rtlpriv, 0x34b, 0x93);
 866        rtl_write_word(rtlpriv, 0x350, 0x870c);
 867        rtl_write_byte(rtlpriv, 0x352, 0x1);
 868        if (ppsc->support_backdoor)
 869                rtl_write_byte(rtlpriv, 0x349, 0x1b);
 870        else
 871                rtl_write_byte(rtlpriv, 0x349, 0x03);
 872        rtl_write_word(rtlpriv, 0x350, 0x2718);
 873        rtl_write_byte(rtlpriv, 0x352, 0x1);
 874}
 875
 876void rtl92de_enable_hw_security_config(struct ieee80211_hw *hw)
 877{
 878        struct rtl_priv *rtlpriv = rtl_priv(hw);
 879        u8 sec_reg_value;
 880
 881        RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
 882                 ("PairwiseEncAlgorithm = %d GroupEncAlgorithm = %d\n",
 883                  rtlpriv->sec.pairwise_enc_algorithm,
 884                  rtlpriv->sec.group_enc_algorithm));
 885        if (rtlpriv->cfg->mod_params->sw_crypto || rtlpriv->sec.use_sw_sec) {
 886                RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
 887                         ("not open hw encryption\n"));
 888                return;
 889        }
 890        sec_reg_value = SCR_TXENCENABLE | SCR_RXENCENABLE;
 891        if (rtlpriv->sec.use_defaultkey) {
 892                sec_reg_value |= SCR_TXUSEDK;
 893                sec_reg_value |= SCR_RXUSEDK;
 894        }
 895        sec_reg_value |= (SCR_RXBCUSEDK | SCR_TXBCUSEDK);
 896        rtl_write_byte(rtlpriv, REG_CR + 1, 0x02);
 897        RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD,
 898                 ("The SECR-value %x\n", sec_reg_value));
 899        rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_WPA_CONFIG, &sec_reg_value);
 900}
 901
 902int rtl92de_hw_init(struct ieee80211_hw *hw)
 903{
 904        struct rtl_priv *rtlpriv = rtl_priv(hw);
 905        struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
 906        struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
 907        struct rtl_phy *rtlphy = &(rtlpriv->phy);
 908        struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
 909        struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
 910        bool rtstatus = true;
 911        u8 tmp_u1b;
 912        int i;
 913        int err;
 914        unsigned long flags;
 915
 916        rtlpci->being_init_adapter = true;
 917        rtlpci->init_ready = false;
 918        spin_lock_irqsave(&globalmutex_for_power_and_efuse, flags);
 919        /* we should do iqk after disable/enable */
 920        rtl92d_phy_reset_iqk_result(hw);
 921        /* rtlpriv->intf_ops->disable_aspm(hw); */
 922        rtstatus = _rtl92de_init_mac(hw);
 923        if (rtstatus != true) {
 924                RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, ("Init MAC failed\n"));
 925                err = 1;
 926                spin_unlock_irqrestore(&globalmutex_for_power_and_efuse, flags);
 927                return err;
 928        }
 929        err = rtl92d_download_fw(hw);
 930        spin_unlock_irqrestore(&globalmutex_for_power_and_efuse, flags);
 931        if (err) {
 932                RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
 933                         ("Failed to download FW. Init HW "
 934                         "without FW..\n"));
 935                rtlhal->fw_ready = false;
 936                return 1;
 937        } else {
 938                rtlhal->fw_ready = true;
 939        }
 940        rtlhal->last_hmeboxnum = 0;
 941        rtlpriv->psc.fw_current_inpsmode = false;
 942
 943        tmp_u1b = rtl_read_byte(rtlpriv, 0x605);
 944        tmp_u1b = tmp_u1b | 0x30;
 945        rtl_write_byte(rtlpriv, 0x605, tmp_u1b);
 946
 947        if (rtlhal->earlymode_enable) {
 948                RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
 949                         ("EarlyMode Enabled!!!\n"));
 950
 951                tmp_u1b = rtl_read_byte(rtlpriv, 0x4d0);
 952                tmp_u1b = tmp_u1b | 0x1f;
 953                rtl_write_byte(rtlpriv, 0x4d0, tmp_u1b);
 954
 955                rtl_write_byte(rtlpriv, 0x4d3, 0x80);
 956
 957                tmp_u1b = rtl_read_byte(rtlpriv, 0x605);
 958                tmp_u1b = tmp_u1b | 0x40;
 959                rtl_write_byte(rtlpriv, 0x605, tmp_u1b);
 960        }
 961
 962        if (mac->rdg_en) {
 963                rtl_write_byte(rtlpriv, REG_RD_CTRL, 0xff);
 964                rtl_write_word(rtlpriv, REG_RD_NAV_NXT, 0x200);
 965                rtl_write_byte(rtlpriv, REG_RD_RESP_PKT_TH, 0x05);
 966        }
 967
 968        rtl92d_phy_mac_config(hw);
 969        /* because last function modify RCR, so we update
 970         * rcr var here, or TP will unstable for receive_config
 971         * is wrong, RX RCR_ACRC32 will cause TP unstabel & Rx
 972         * RCR_APP_ICV will cause mac80211 unassoc for cisco 1252*/
 973        rtlpci->receive_config = rtl_read_dword(rtlpriv, REG_RCR);
 974        rtlpci->receive_config &= ~(RCR_ACRC32 | RCR_AICV);
 975
 976        rtl92d_phy_bb_config(hw);
 977
 978        rtlphy->rf_mode = RF_OP_BY_SW_3WIRE;
 979        /* set before initialize RF */
 980        rtl_set_bbreg(hw, RFPGA0_ANALOGPARAMETER4, 0x00f00000, 0xf);
 981
 982        /* config RF */
 983        rtl92d_phy_rf_config(hw);
 984
 985        /* After read predefined TXT, we must set BB/MAC/RF
 986         * register as our requirement */
 987        /* After load BB,RF params,we need do more for 92D. */
 988        rtl92d_update_bbrf_configuration(hw);
 989        /* set default value after initialize RF,  */
 990        rtl_set_bbreg(hw, RFPGA0_ANALOGPARAMETER4, 0x00f00000, 0);
 991        rtlphy->rfreg_chnlval[0] = rtl_get_rfreg(hw, (enum radio_path)0,
 992                        RF_CHNLBW, BRFREGOFFSETMASK);
 993        rtlphy->rfreg_chnlval[1] = rtl_get_rfreg(hw, (enum radio_path)1,
 994                        RF_CHNLBW, BRFREGOFFSETMASK);
 995
 996        /*---- Set CCK and OFDM Block "ON"----*/
 997        if (rtlhal->current_bandtype == BAND_ON_2_4G)
 998                rtl_set_bbreg(hw, RFPGA0_RFMOD, BCCKEN, 0x1);
 999        rtl_set_bbreg(hw, RFPGA0_RFMOD, BOFDMEN, 0x1);
1000        if (rtlhal->interfaceindex == 0) {
1001                /* RFPGA0_ANALOGPARAMETER2: cck clock select,
1002                 *  set to 20MHz by default */
1003                rtl_set_bbreg(hw, RFPGA0_ANALOGPARAMETER2, BIT(10) |
1004                              BIT(11), 3);
1005        } else {
1006                /* Mac1 */
1007                rtl_set_bbreg(hw, RFPGA0_ANALOGPARAMETER2, BIT(11) |
1008                              BIT(10), 3);
1009        }
1010
1011        _rtl92de_hw_configure(hw);
1012
1013        /* reset hw sec */
1014        rtl_cam_reset_all_entry(hw);
1015        rtl92de_enable_hw_security_config(hw);
1016
1017        /* Read EEPROM TX power index and PHY_REG_PG.txt to capture correct */
1018        /* TX power index for different rate set. */
1019        rtl92d_phy_get_hw_reg_originalvalue(hw);
1020        rtl92d_phy_set_txpower_level(hw, rtlphy->current_channel);
1021
1022        ppsc->rfpwr_state = ERFON;
1023
1024        rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_ETHER_ADDR, mac->mac_addr);
1025
1026        _rtl92de_enable_aspm_back_door(hw);
1027        /* rtlpriv->intf_ops->enable_aspm(hw); */
1028
1029        rtl92d_dm_init(hw);
1030        rtlpci->being_init_adapter = false;
1031
1032        if (ppsc->rfpwr_state == ERFON) {
1033                rtl92d_phy_lc_calibrate(hw);
1034                /* 5G and 2.4G must wait sometime to let RF LO ready */
1035                if (rtlhal->macphymode == DUALMAC_DUALPHY) {
1036                        u32 tmp_rega;
1037                        for (i = 0; i < 10000; i++) {
1038                                udelay(MAX_STALL_TIME);
1039
1040                                tmp_rega = rtl_get_rfreg(hw,
1041                                                  (enum radio_path)RF90_PATH_A,
1042                                                  0x2a, BMASKDWORD);
1043
1044                                if (((tmp_rega & BIT(11)) == BIT(11)))
1045                                        break;
1046                        }
1047                        /* check that loop was successful. If not, exit now */
1048                        if (i == 10000) {
1049                                rtlpci->init_ready = false;
1050                                return 1;
1051                        }
1052                }
1053        }
1054        rtlpci->init_ready = true;
1055        return err;
1056}
1057
1058static enum version_8192d _rtl92de_read_chip_version(struct ieee80211_hw *hw)
1059{
1060        struct rtl_priv *rtlpriv = rtl_priv(hw);
1061        enum version_8192d version = VERSION_NORMAL_CHIP_92D_SINGLEPHY;
1062        u32 value32;
1063
1064        value32 = rtl_read_dword(rtlpriv, REG_SYS_CFG);
1065        if (!(value32 & 0x000f0000)) {
1066                version = VERSION_TEST_CHIP_92D_SINGLEPHY;
1067                RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("TEST CHIP!!!\n"));
1068        } else {
1069                version = VERSION_NORMAL_CHIP_92D_SINGLEPHY;
1070                RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("Normal CHIP!!!\n"));
1071        }
1072        return version;
1073}
1074
1075static int _rtl92de_set_media_status(struct ieee80211_hw *hw,
1076                                     enum nl80211_iftype type)
1077{
1078        struct rtl_priv *rtlpriv = rtl_priv(hw);
1079        u8 bt_msr = rtl_read_byte(rtlpriv, MSR);
1080        enum led_ctl_mode ledaction = LED_CTL_NO_LINK;
1081        u8 bcnfunc_enable;
1082
1083        bt_msr &= 0xfc;
1084
1085        if (type == NL80211_IFTYPE_UNSPECIFIED ||
1086            type == NL80211_IFTYPE_STATION) {
1087                _rtl92de_stop_tx_beacon(hw);
1088                _rtl92de_enable_bcn_sub_func(hw);
1089        } else if (type == NL80211_IFTYPE_ADHOC ||
1090                type == NL80211_IFTYPE_AP) {
1091                _rtl92de_resume_tx_beacon(hw);
1092                _rtl92de_disable_bcn_sub_func(hw);
1093        } else {
1094                RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
1095                         ("Set HW_VAR_MEDIA_STATUS: No such media "
1096                         "status(%x).\n", type));
1097        }
1098        bcnfunc_enable = rtl_read_byte(rtlpriv, REG_BCN_CTRL);
1099        switch (type) {
1100        case NL80211_IFTYPE_UNSPECIFIED:
1101                bt_msr |= MSR_NOLINK;
1102                ledaction = LED_CTL_LINK;
1103                bcnfunc_enable &= 0xF7;
1104                RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
1105                         ("Set Network type to NO LINK!\n"));
1106                break;
1107        case NL80211_IFTYPE_ADHOC:
1108                bt_msr |= MSR_ADHOC;
1109                bcnfunc_enable |= 0x08;
1110                RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
1111                         ("Set Network type to Ad Hoc!\n"));
1112                break;
1113        case NL80211_IFTYPE_STATION:
1114                bt_msr |= MSR_INFRA;
1115                ledaction = LED_CTL_LINK;
1116                bcnfunc_enable &= 0xF7;
1117                RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
1118                         ("Set Network type to STA!\n"));
1119                break;
1120        case NL80211_IFTYPE_AP:
1121                bt_msr |= MSR_AP;
1122                bcnfunc_enable |= 0x08;
1123                RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
1124                         ("Set Network type to AP!\n"));
1125                break;
1126        default:
1127                RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
1128                         ("Network type %d not support!\n", type));
1129                return 1;
1130                break;
1131
1132        }
1133        rtl_write_byte(rtlpriv, REG_CR + 2, bt_msr);
1134        rtlpriv->cfg->ops->led_control(hw, ledaction);
1135        if ((bt_msr & 0xfc) == MSR_AP)
1136                rtl_write_byte(rtlpriv, REG_BCNTCFG + 1, 0x00);
1137        else
1138                rtl_write_byte(rtlpriv, REG_BCNTCFG + 1, 0x66);
1139        return 0;
1140}
1141
1142void rtl92de_set_check_bssid(struct ieee80211_hw *hw, bool check_bssid)
1143{
1144        struct rtl_priv *rtlpriv = rtl_priv(hw);
1145        struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
1146        u32 reg_rcr = rtlpci->receive_config;
1147
1148        if (rtlpriv->psc.rfpwr_state != ERFON)
1149                return;
1150        if (check_bssid) {
1151                reg_rcr |= (RCR_CBSSID_DATA | RCR_CBSSID_BCN);
1152                rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR, (u8 *)(&reg_rcr));
1153                _rtl92de_set_bcn_ctrl_reg(hw, 0, BIT(4));
1154        } else if (check_bssid == false) {
1155                reg_rcr &= (~(RCR_CBSSID_DATA | RCR_CBSSID_BCN));
1156                _rtl92de_set_bcn_ctrl_reg(hw, BIT(4), 0);
1157                rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR, (u8 *)(&reg_rcr));
1158        }
1159}
1160
1161int rtl92de_set_network_type(struct ieee80211_hw *hw, enum nl80211_iftype type)
1162{
1163        struct rtl_priv *rtlpriv = rtl_priv(hw);
1164
1165        if (_rtl92de_set_media_status(hw, type))
1166                return -EOPNOTSUPP;
1167
1168        /* check bssid */
1169        if (rtlpriv->mac80211.link_state == MAC80211_LINKED) {
1170                if (type != NL80211_IFTYPE_AP)
1171                        rtl92de_set_check_bssid(hw, true);
1172        } else {
1173                rtl92de_set_check_bssid(hw, false);
1174        }
1175        return 0;
1176}
1177
1178/* do iqk or reload iqk */
1179/* windows just rtl92d_phy_reload_iqk_setting in set channel,
1180 * but it's very strict for time sequence so we add
1181 * rtl92d_phy_reload_iqk_setting here */
1182void rtl92d_linked_set_reg(struct ieee80211_hw *hw)
1183{
1184        struct rtl_priv *rtlpriv = rtl_priv(hw);
1185        struct rtl_phy *rtlphy = &(rtlpriv->phy);
1186        u8 indexforchannel;
1187        u8 channel = rtlphy->current_channel;
1188
1189        indexforchannel = rtl92d_get_rightchnlplace_for_iqk(channel);
1190        if (!rtlphy->iqk_matrix_regsetting[indexforchannel].iqk_done) {
1191                RT_TRACE(rtlpriv, COMP_SCAN | COMP_INIT, DBG_DMESG,
1192                                ("Do IQK for channel:%d.\n", channel));
1193                rtl92d_phy_iq_calibrate(hw);
1194        }
1195}
1196
1197/* don't set REG_EDCA_BE_PARAM here because
1198 * mac80211 will send pkt when scan */
1199void rtl92de_set_qos(struct ieee80211_hw *hw, int aci)
1200{
1201        struct rtl_priv *rtlpriv = rtl_priv(hw);
1202        rtl92d_dm_init_edca_turbo(hw);
1203        return;
1204        switch (aci) {
1205        case AC1_BK:
1206                rtl_write_dword(rtlpriv, REG_EDCA_BK_PARAM, 0xa44f);
1207                break;
1208        case AC0_BE:
1209                break;
1210        case AC2_VI:
1211                rtl_write_dword(rtlpriv, REG_EDCA_VI_PARAM, 0x5e4322);
1212                break;
1213        case AC3_VO:
1214                rtl_write_dword(rtlpriv, REG_EDCA_VO_PARAM, 0x2f3222);
1215                break;
1216        default:
1217                RT_ASSERT(false, ("invalid aci: %d !\n", aci));
1218                break;
1219        }
1220}
1221
1222void rtl92de_enable_interrupt(struct ieee80211_hw *hw)
1223{
1224        struct rtl_priv *rtlpriv = rtl_priv(hw);
1225        struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
1226
1227        rtl_write_dword(rtlpriv, REG_HIMR, rtlpci->irq_mask[0] & 0xFFFFFFFF);
1228        rtl_write_dword(rtlpriv, REG_HIMRE, rtlpci->irq_mask[1] & 0xFFFFFFFF);
1229}
1230
1231void rtl92de_disable_interrupt(struct ieee80211_hw *hw)
1232{
1233        struct rtl_priv *rtlpriv = rtl_priv(hw);
1234        struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
1235
1236        rtl_write_dword(rtlpriv, REG_HIMR, IMR8190_DISABLED);
1237        rtl_write_dword(rtlpriv, REG_HIMRE, IMR8190_DISABLED);
1238        synchronize_irq(rtlpci->pdev->irq);
1239}
1240
1241static void _rtl92de_poweroff_adapter(struct ieee80211_hw *hw)
1242{
1243        struct rtl_priv *rtlpriv = rtl_priv(hw);
1244        u8 u1b_tmp;
1245        unsigned long flags;
1246
1247        rtlpriv->intf_ops->enable_aspm(hw);
1248        rtl_write_byte(rtlpriv, REG_RF_CTRL, 0x00);
1249        rtl_set_bbreg(hw, RFPGA0_XCD_RFPARAMETER, BIT(3), 0);
1250        rtl_set_bbreg(hw, RFPGA0_XCD_RFPARAMETER, BIT(15), 0);
1251
1252        /* 0x20:value 05-->04 */
1253        rtl_write_byte(rtlpriv, REG_LDOA15_CTRL, 0x04);
1254
1255        /*  ==== Reset digital sequence   ====== */
1256        rtl92d_firmware_selfreset(hw);
1257
1258        /* f.   SYS_FUNC_EN 0x03[7:0]=0x51 reset MCU, MAC register, DCORE */
1259        rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN + 1, 0x51);
1260
1261        /* g.   MCUFWDL 0x80[1:0]=0 reset MCU ready status */
1262        rtl_write_byte(rtlpriv, REG_MCUFWDL, 0x00);
1263
1264        /*  ==== Pull GPIO PIN to balance level and LED control ====== */
1265
1266        /* h.     GPIO_PIN_CTRL 0x44[31:0]=0x000  */
1267        rtl_write_dword(rtlpriv, REG_GPIO_PIN_CTRL, 0x00000000);
1268
1269        /* i.    Value = GPIO_PIN_CTRL[7:0] */
1270        u1b_tmp = rtl_read_byte(rtlpriv, REG_GPIO_PIN_CTRL);
1271
1272        /* j.    GPIO_PIN_CTRL 0x44[31:0] = 0x00FF0000 | (value <<8); */
1273        /* write external PIN level  */
1274        rtl_write_dword(rtlpriv, REG_GPIO_PIN_CTRL,
1275                        0x00FF0000 | (u1b_tmp << 8));
1276
1277        /* k.   GPIO_MUXCFG 0x42 [15:0] = 0x0780 */
1278        rtl_write_word(rtlpriv, REG_GPIO_IO_SEL, 0x0790);
1279
1280        /* l.   LEDCFG 0x4C[15:0] = 0x8080 */
1281        rtl_write_word(rtlpriv, REG_LEDCFG0, 0x8080);
1282
1283        /*  ==== Disable analog sequence === */
1284
1285        /* m.   AFE_PLL_CTRL[7:0] = 0x80  disable PLL */
1286        rtl_write_byte(rtlpriv, REG_AFE_PLL_CTRL, 0x80);
1287
1288        /* n.   SPS0_CTRL 0x11[7:0] = 0x22  enter PFM mode */
1289        rtl_write_byte(rtlpriv, REG_SPS0_CTRL, 0x23);
1290
1291        /* o.   AFE_XTAL_CTRL 0x24[7:0] = 0x0E  disable XTAL, if No BT COEX */
1292        rtl_write_byte(rtlpriv, REG_AFE_XTAL_CTRL, 0x0e);
1293
1294        /* p.   RSV_CTRL 0x1C[7:0] = 0x0E lock ISO/CLK/Power control register */
1295        rtl_write_byte(rtlpriv, REG_RSV_CTRL, 0x0e);
1296
1297        /*  ==== interface into suspend === */
1298
1299        /* q.   APS_FSMCO[15:8] = 0x58 PCIe suspend mode */
1300        /* According to power document V11, we need to set this */
1301        /* value as 0x18. Otherwise, we may not L0s sometimes. */
1302        /* This indluences power consumption. Bases on SD1's test, */
1303        /* set as 0x00 do not affect power current. And if it */
1304        /* is set as 0x18, they had ever met auto load fail problem. */
1305        rtl_write_byte(rtlpriv, REG_APS_FSMCO + 1, 0x10);
1306
1307        RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
1308                 ("In PowerOff,reg0x%x=%X\n", REG_SPS0_CTRL,
1309                  rtl_read_byte(rtlpriv, REG_SPS0_CTRL)));
1310        /* r.   Note: for PCIe interface, PON will not turn */
1311        /* off m-bias and BandGap in PCIe suspend mode.  */
1312
1313        /* 0x17[7] 1b': power off in process  0b' : power off over */
1314        if (rtlpriv->rtlhal.macphymode != SINGLEMAC_SINGLEPHY) {
1315                spin_lock_irqsave(&globalmutex_power, flags);
1316                u1b_tmp = rtl_read_byte(rtlpriv, REG_POWER_OFF_IN_PROCESS);
1317                u1b_tmp &= (~BIT(7));
1318                rtl_write_byte(rtlpriv, REG_POWER_OFF_IN_PROCESS, u1b_tmp);
1319                spin_unlock_irqrestore(&globalmutex_power, flags);
1320        }
1321
1322        RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("<=======\n"));
1323}
1324
1325void rtl92de_card_disable(struct ieee80211_hw *hw)
1326{
1327        struct rtl_priv *rtlpriv = rtl_priv(hw);
1328        struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
1329        struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
1330        struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
1331        enum nl80211_iftype opmode;
1332
1333        mac->link_state = MAC80211_NOLINK;
1334        opmode = NL80211_IFTYPE_UNSPECIFIED;
1335        _rtl92de_set_media_status(hw, opmode);
1336
1337        if (rtlpci->driver_is_goingto_unload ||
1338            ppsc->rfoff_reason > RF_CHANGE_BY_PS)
1339                rtlpriv->cfg->ops->led_control(hw, LED_CTL_POWER_OFF);
1340        RT_SET_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC);
1341        /* Power sequence for each MAC. */
1342        /* a. stop tx DMA  */
1343        /* b. close RF */
1344        /* c. clear rx buf */
1345        /* d. stop rx DMA */
1346        /* e.  reset MAC */
1347
1348        /* a. stop tx DMA */
1349        rtl_write_byte(rtlpriv, REG_PCIE_CTRL_REG + 1, 0xFE);
1350        udelay(50);
1351
1352        /* b. TXPAUSE 0x522[7:0] = 0xFF Pause MAC TX queue */
1353
1354        /* c. ========RF OFF sequence==========  */
1355        /* 0x88c[23:20] = 0xf. */
1356        rtl_set_bbreg(hw, RFPGA0_ANALOGPARAMETER4, 0x00f00000, 0xf);
1357        rtl_set_rfreg(hw, RF90_PATH_A, 0x00, BRFREGOFFSETMASK, 0x00);
1358
1359        /* APSD_CTRL 0x600[7:0] = 0x40 */
1360        rtl_write_byte(rtlpriv, REG_APSD_CTRL, 0x40);
1361
1362        /* Close antenna 0,0xc04,0xd04 */
1363        rtl_set_bbreg(hw, ROFDM0_TRXPATHENABLE, BMASKBYTE0, 0);
1364        rtl_set_bbreg(hw, ROFDM1_TRXPATHENABLE, BDWORD, 0);
1365
1366        /*  SYS_FUNC_EN 0x02[7:0] = 0xE2   reset BB state machine */
1367        rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN, 0xE2);
1368
1369        /* Mac0 can not do Global reset. Mac1 can do. */
1370        /* SYS_FUNC_EN 0x02[7:0] = 0xE0  reset BB state machine  */
1371        if (rtlpriv->rtlhal.interfaceindex == 1)
1372                rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN, 0xE0);
1373        udelay(50);
1374
1375        /* d.  stop tx/rx dma before disable REG_CR (0x100) to fix */
1376        /* dma hang issue when disable/enable device.  */
1377        rtl_write_byte(rtlpriv, REG_PCIE_CTRL_REG + 1, 0xff);
1378        udelay(50);
1379        rtl_write_byte(rtlpriv, REG_CR, 0x0);
1380        RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("==> Do power off.......\n"));
1381        if (rtl92d_phy_check_poweroff(hw))
1382                _rtl92de_poweroff_adapter(hw);
1383        return;
1384}
1385
1386void rtl92de_interrupt_recognized(struct ieee80211_hw *hw,
1387                                  u32 *p_inta, u32 *p_intb)
1388{
1389        struct rtl_priv *rtlpriv = rtl_priv(hw);
1390        struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
1391
1392        *p_inta = rtl_read_dword(rtlpriv, ISR) & rtlpci->irq_mask[0];
1393        rtl_write_dword(rtlpriv, ISR, *p_inta);
1394
1395        /*
1396         * *p_intb = rtl_read_dword(rtlpriv, REG_HISRE) & rtlpci->irq_mask[1];
1397         * rtl_write_dword(rtlpriv, ISR + 4, *p_intb);
1398         */
1399}
1400
1401void rtl92de_set_beacon_related_registers(struct ieee80211_hw *hw)
1402{
1403        struct rtl_priv *rtlpriv = rtl_priv(hw);
1404        struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
1405        u16 bcn_interval, atim_window;
1406
1407        bcn_interval = mac->beacon_interval;
1408        atim_window = 2;
1409        /*rtl92de_disable_interrupt(hw);  */
1410        rtl_write_word(rtlpriv, REG_ATIMWND, atim_window);
1411        rtl_write_word(rtlpriv, REG_BCN_INTERVAL, bcn_interval);
1412        rtl_write_word(rtlpriv, REG_BCNTCFG, 0x660f);
1413        rtl_write_byte(rtlpriv, REG_RXTSF_OFFSET_CCK, 0x20);
1414        if (rtlpriv->rtlhal.current_bandtype == BAND_ON_5G)
1415                rtl_write_byte(rtlpriv, REG_RXTSF_OFFSET_OFDM, 0x30);
1416        else
1417                rtl_write_byte(rtlpriv, REG_RXTSF_OFFSET_OFDM, 0x20);
1418        rtl_write_byte(rtlpriv, 0x606, 0x30);
1419}
1420
1421void rtl92de_set_beacon_interval(struct ieee80211_hw *hw)
1422{
1423        struct rtl_priv *rtlpriv = rtl_priv(hw);
1424        struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
1425        u16 bcn_interval = mac->beacon_interval;
1426
1427        RT_TRACE(rtlpriv, COMP_BEACON, DBG_DMESG,
1428                 ("beacon_interval:%d\n", bcn_interval));
1429        /* rtl92de_disable_interrupt(hw); */
1430        rtl_write_word(rtlpriv, REG_BCN_INTERVAL, bcn_interval);
1431        /* rtl92de_enable_interrupt(hw); */
1432}
1433
1434void rtl92de_update_interrupt_mask(struct ieee80211_hw *hw,
1435                                   u32 add_msr, u32 rm_msr)
1436{
1437        struct rtl_priv *rtlpriv = rtl_priv(hw);
1438        struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
1439
1440        RT_TRACE(rtlpriv, COMP_INTR, DBG_LOUD,
1441                 ("add_msr:%x, rm_msr:%x\n", add_msr, rm_msr));
1442        if (add_msr)
1443                rtlpci->irq_mask[0] |= add_msr;
1444        if (rm_msr)
1445                rtlpci->irq_mask[0] &= (~rm_msr);
1446        rtl92de_disable_interrupt(hw);
1447        rtl92de_enable_interrupt(hw);
1448}
1449
1450static void _rtl92de_readpowervalue_fromprom(struct txpower_info *pwrinfo,
1451                                 u8 *rom_content, bool autoLoadfail)
1452{
1453        u32 rfpath, eeaddr, group, offset1, offset2;
1454        u8 i;
1455
1456        memset(pwrinfo, 0, sizeof(struct txpower_info));
1457        if (autoLoadfail) {
1458                for (group = 0; group < CHANNEL_GROUP_MAX; group++) {
1459                        for (rfpath = 0; rfpath < RF6052_MAX_PATH; rfpath++) {
1460                                if (group < CHANNEL_GROUP_MAX_2G) {
1461                                        pwrinfo->cck_index[rfpath][group] =
1462                                            EEPROM_DEFAULT_TXPOWERLEVEL_2G;
1463                                        pwrinfo->ht40_1sindex[rfpath][group] =
1464                                            EEPROM_DEFAULT_TXPOWERLEVEL_2G;
1465                                } else {
1466                                        pwrinfo->ht40_1sindex[rfpath][group] =
1467                                            EEPROM_DEFAULT_TXPOWERLEVEL_5G;
1468                                }
1469                                pwrinfo->ht40_2sindexdiff[rfpath][group] =
1470                                    EEPROM_DEFAULT_HT40_2SDIFF;
1471                                pwrinfo->ht20indexdiff[rfpath][group] =
1472                                    EEPROM_DEFAULT_HT20_DIFF;
1473                                pwrinfo->ofdmindexdiff[rfpath][group] =
1474                                    EEPROM_DEFAULT_LEGACYHTTXPOWERDIFF;
1475                                pwrinfo->ht40maxoffset[rfpath][group] =
1476                                    EEPROM_DEFAULT_HT40_PWRMAXOFFSET;
1477                                pwrinfo->ht20maxoffset[rfpath][group] =
1478                                    EEPROM_DEFAULT_HT20_PWRMAXOFFSET;
1479                        }
1480                }
1481                for (i = 0; i < 3; i++) {
1482                        pwrinfo->tssi_a[i] = EEPROM_DEFAULT_TSSI;
1483                        pwrinfo->tssi_b[i] = EEPROM_DEFAULT_TSSI;
1484                }
1485                return;
1486        }
1487
1488        /* Maybe autoload OK,buf the tx power index value is not filled.
1489         * If we find it, we set it to default value. */
1490        for (rfpath = 0; rfpath < RF6052_MAX_PATH; rfpath++) {
1491                for (group = 0; group < CHANNEL_GROUP_MAX_2G; group++) {
1492                        eeaddr = EEPROM_CCK_TX_PWR_INX_2G + (rfpath * 3)
1493                                 + group;
1494                        pwrinfo->cck_index[rfpath][group] =
1495                                        (rom_content[eeaddr] == 0xFF) ?
1496                                             (eeaddr > 0x7B ?
1497                                             EEPROM_DEFAULT_TXPOWERLEVEL_5G :
1498                                             EEPROM_DEFAULT_TXPOWERLEVEL_2G) :
1499                                             rom_content[eeaddr];
1500                }
1501        }
1502        for (rfpath = 0; rfpath < RF6052_MAX_PATH; rfpath++) {
1503                for (group = 0; group < CHANNEL_GROUP_MAX; group++) {
1504                        offset1 = group / 3;
1505                        offset2 = group % 3;
1506                        eeaddr = EEPROM_HT40_1S_TX_PWR_INX_2G + (rfpath * 3) +
1507                            offset2 + offset1 * 21;
1508                        pwrinfo->ht40_1sindex[rfpath][group] =
1509                            (rom_content[eeaddr] == 0xFF) ? (eeaddr > 0x7B ?
1510                                             EEPROM_DEFAULT_TXPOWERLEVEL_5G :
1511                                             EEPROM_DEFAULT_TXPOWERLEVEL_2G) :
1512                                                 rom_content[eeaddr];
1513                }
1514        }
1515        /* These just for 92D efuse offset. */
1516        for (group = 0; group < CHANNEL_GROUP_MAX; group++) {
1517                for (rfpath = 0; rfpath < RF6052_MAX_PATH; rfpath++) {
1518                        int base1 = EEPROM_HT40_2S_TX_PWR_INX_DIFF_2G;
1519
1520                        offset1 = group / 3;
1521                        offset2 = group % 3;
1522
1523                        if (rom_content[base1 + offset2 + offset1 * 21] != 0xFF)
1524                                pwrinfo->ht40_2sindexdiff[rfpath][group] =
1525                                    (rom_content[base1 +
1526                                     offset2 + offset1 * 21] >> (rfpath * 4))
1527                                     & 0xF;
1528                        else
1529                                pwrinfo->ht40_2sindexdiff[rfpath][group] =
1530                                    EEPROM_DEFAULT_HT40_2SDIFF;
1531                        if (rom_content[EEPROM_HT20_TX_PWR_INX_DIFF_2G + offset2
1532                            + offset1 * 21] != 0xFF)
1533                                pwrinfo->ht20indexdiff[rfpath][group] =
1534                                    (rom_content[EEPROM_HT20_TX_PWR_INX_DIFF_2G
1535                                    + offset2 + offset1 * 21] >> (rfpath * 4))
1536                                    & 0xF;
1537                        else
1538                                pwrinfo->ht20indexdiff[rfpath][group] =
1539                                    EEPROM_DEFAULT_HT20_DIFF;
1540                        if (rom_content[EEPROM_OFDM_TX_PWR_INX_DIFF_2G + offset2
1541                            + offset1 * 21] != 0xFF)
1542                                pwrinfo->ofdmindexdiff[rfpath][group] =
1543                                    (rom_content[EEPROM_OFDM_TX_PWR_INX_DIFF_2G
1544                                     + offset2 + offset1 * 21] >> (rfpath * 4))
1545                                     & 0xF;
1546                        else
1547                                pwrinfo->ofdmindexdiff[rfpath][group] =
1548                                    EEPROM_DEFAULT_LEGACYHTTXPOWERDIFF;
1549                        if (rom_content[EEPROM_HT40_MAX_PWR_OFFSET_2G + offset2
1550                            + offset1 * 21] != 0xFF)
1551                                pwrinfo->ht40maxoffset[rfpath][group] =
1552                                    (rom_content[EEPROM_HT40_MAX_PWR_OFFSET_2G
1553                                    + offset2 + offset1 * 21] >> (rfpath * 4))
1554                                    & 0xF;
1555                        else
1556                                pwrinfo->ht40maxoffset[rfpath][group] =
1557                                    EEPROM_DEFAULT_HT40_PWRMAXOFFSET;
1558                        if (rom_content[EEPROM_HT20_MAX_PWR_OFFSET_2G + offset2
1559                            + offset1 * 21] != 0xFF)
1560                                pwrinfo->ht20maxoffset[rfpath][group] =
1561                                    (rom_content[EEPROM_HT20_MAX_PWR_OFFSET_2G +
1562                                     offset2 + offset1 * 21] >> (rfpath * 4)) &
1563                                     0xF;
1564                        else
1565                                pwrinfo->ht20maxoffset[rfpath][group] =
1566                                    EEPROM_DEFAULT_HT20_PWRMAXOFFSET;
1567                }
1568        }
1569        if (rom_content[EEPROM_TSSI_A_5G] != 0xFF) {
1570                /* 5GL */
1571                pwrinfo->tssi_a[0] = rom_content[EEPROM_TSSI_A_5G] & 0x3F;
1572                pwrinfo->tssi_b[0] = rom_content[EEPROM_TSSI_B_5G] & 0x3F;
1573                /* 5GM */
1574                pwrinfo->tssi_a[1] = rom_content[EEPROM_TSSI_AB_5G] & 0x3F;
1575                pwrinfo->tssi_b[1] =
1576                    (rom_content[EEPROM_TSSI_AB_5G] & 0xC0) >> 6 |
1577                    (rom_content[EEPROM_TSSI_AB_5G + 1] & 0x0F) << 2;
1578                /* 5GH */
1579                pwrinfo->tssi_a[2] = (rom_content[EEPROM_TSSI_AB_5G + 1] &
1580                                      0xF0) >> 4 |
1581                    (rom_content[EEPROM_TSSI_AB_5G + 2] & 0x03) << 4;
1582                pwrinfo->tssi_b[2] = (rom_content[EEPROM_TSSI_AB_5G + 2] &
1583                                      0xFC) >> 2;
1584        } else {
1585                for (i = 0; i < 3; i++) {
1586                        pwrinfo->tssi_a[i] = EEPROM_DEFAULT_TSSI;
1587                        pwrinfo->tssi_b[i] = EEPROM_DEFAULT_TSSI;
1588                }
1589        }
1590}
1591
1592static void _rtl92de_read_txpower_info(struct ieee80211_hw *hw,
1593                                       bool autoload_fail, u8 *hwinfo)
1594{
1595        struct rtl_priv *rtlpriv = rtl_priv(hw);
1596        struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
1597        struct txpower_info pwrinfo;
1598        u8 tempval[2], i, pwr, diff;
1599        u32 ch, rfPath, group;
1600
1601        _rtl92de_readpowervalue_fromprom(&pwrinfo, hwinfo, autoload_fail);
1602        if (!autoload_fail) {
1603                /* bit0~2 */
1604                rtlefuse->eeprom_regulatory = (hwinfo[EEPROM_RF_OPT1] & 0x7);
1605                rtlefuse->eeprom_thermalmeter =
1606                         hwinfo[EEPROM_THERMAL_METER] & 0x1f;
1607                rtlefuse->crystalcap = hwinfo[EEPROM_XTAL_K];
1608                tempval[0] = hwinfo[EEPROM_IQK_DELTA] & 0x03;
1609                tempval[1] = (hwinfo[EEPROM_LCK_DELTA] & 0x0C) >> 2;
1610                rtlefuse->txpwr_fromeprom = true;
1611                if (IS_92D_D_CUT(rtlpriv->rtlhal.version) ||
1612                    IS_92D_E_CUT(rtlpriv->rtlhal.version)) {
1613                        rtlefuse->internal_pa_5g[0] =
1614                                !((hwinfo[EEPROM_TSSI_A_5G] & BIT(6)) >> 6);
1615                        rtlefuse->internal_pa_5g[1] =
1616                                !((hwinfo[EEPROM_TSSI_B_5G] & BIT(6)) >> 6);
1617                        RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG,
1618                                 ("Is D cut,Internal PA0 %d Internal PA1 %d\n",
1619                                 rtlefuse->internal_pa_5g[0],
1620                                 rtlefuse->internal_pa_5g[1]))
1621                }
1622                rtlefuse->eeprom_c9 = hwinfo[EEPROM_RF_OPT6];
1623                rtlefuse->eeprom_cc = hwinfo[EEPROM_RF_OPT7];
1624        } else {
1625                rtlefuse->eeprom_regulatory = 0;
1626                rtlefuse->eeprom_thermalmeter = EEPROM_DEFAULT_THERMALMETER;
1627                rtlefuse->crystalcap = EEPROM_DEFAULT_CRYSTALCAP;
1628                tempval[0] = tempval[1] = 3;
1629        }
1630
1631        /* Use default value to fill parameters if
1632         * efuse is not filled on some place. */
1633
1634        /* ThermalMeter from EEPROM */
1635        if (rtlefuse->eeprom_thermalmeter < 0x06 ||
1636            rtlefuse->eeprom_thermalmeter > 0x1c)
1637                rtlefuse->eeprom_thermalmeter = 0x12;
1638        rtlefuse->thermalmeter[0] = rtlefuse->eeprom_thermalmeter;
1639
1640        /* check XTAL_K */
1641        if (rtlefuse->crystalcap == 0xFF)
1642                rtlefuse->crystalcap = 0;
1643        if (rtlefuse->eeprom_regulatory > 3)
1644                rtlefuse->eeprom_regulatory = 0;
1645
1646        for (i = 0; i < 2; i++) {
1647                switch (tempval[i]) {
1648                case 0:
1649                        tempval[i] = 5;
1650                        break;
1651                case 1:
1652                        tempval[i] = 4;
1653                        break;
1654                case 2:
1655                        tempval[i] = 3;
1656                        break;
1657                case 3:
1658                default:
1659                        tempval[i] = 0;
1660                        break;
1661                }
1662        }
1663
1664        rtlefuse->delta_iqk = tempval[0];
1665        if (tempval[1] > 0)
1666                rtlefuse->delta_lck = tempval[1] - 1;
1667        if (rtlefuse->eeprom_c9 == 0xFF)
1668                rtlefuse->eeprom_c9 = 0x00;
1669        RT_TRACE(rtlpriv, COMP_INTR, DBG_LOUD,
1670                 ("EEPROMRegulatory = 0x%x\n", rtlefuse->eeprom_regulatory));
1671        RT_TRACE(rtlpriv, COMP_INTR, DBG_LOUD,
1672                 ("ThermalMeter = 0x%x\n", rtlefuse->eeprom_thermalmeter));
1673        RT_TRACE(rtlpriv, COMP_INTR, DBG_LOUD,
1674                 ("CrystalCap = 0x%x\n", rtlefuse->crystalcap));
1675        RT_TRACE(rtlpriv, COMP_INTR, DBG_LOUD,
1676                 ("Delta_IQK = 0x%x Delta_LCK = 0x%x\n", rtlefuse->delta_iqk,
1677                 rtlefuse->delta_lck));
1678
1679        for (rfPath = 0; rfPath < RF6052_MAX_PATH; rfPath++) {
1680                for (ch = 0; ch < CHANNEL_MAX_NUMBER; ch++) {
1681                        group = rtl92d_get_chnlgroup_fromarray((u8) ch);
1682                        if (ch < CHANNEL_MAX_NUMBER_2G)
1683                                rtlefuse->txpwrlevel_cck[rfPath][ch] =
1684                                    pwrinfo.cck_index[rfPath][group];
1685                        rtlefuse->txpwrlevel_ht40_1s[rfPath][ch] =
1686                                    pwrinfo.ht40_1sindex[rfPath][group];
1687                        rtlefuse->txpwr_ht20diff[rfPath][ch] =
1688                                    pwrinfo.ht20indexdiff[rfPath][group];
1689                        rtlefuse->txpwr_legacyhtdiff[rfPath][ch] =
1690                                    pwrinfo.ofdmindexdiff[rfPath][group];
1691                        rtlefuse->pwrgroup_ht20[rfPath][ch] =
1692                                    pwrinfo.ht20maxoffset[rfPath][group];
1693                        rtlefuse->pwrgroup_ht40[rfPath][ch] =
1694                                    pwrinfo.ht40maxoffset[rfPath][group];
1695                        pwr = pwrinfo.ht40_1sindex[rfPath][group];
1696                        diff = pwrinfo.ht40_2sindexdiff[rfPath][group];
1697                        rtlefuse->txpwrlevel_ht40_2s[rfPath][ch] =
1698                                    (pwr > diff) ? (pwr - diff) : 0;
1699                }
1700        }
1701}
1702
1703static void _rtl92de_read_macphymode_from_prom(struct ieee80211_hw *hw,
1704                                               u8 *content)
1705{
1706        struct rtl_priv *rtlpriv = rtl_priv(hw);
1707        struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
1708        u8 macphy_crvalue = content[EEPROM_MAC_FUNCTION];
1709
1710        if (macphy_crvalue & BIT(3)) {
1711                rtlhal->macphymode = SINGLEMAC_SINGLEPHY;
1712                RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
1713                         ("MacPhyMode SINGLEMAC_SINGLEPHY\n"));
1714        } else {
1715                rtlhal->macphymode = DUALMAC_DUALPHY;
1716                RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
1717                         ("MacPhyMode DUALMAC_DUALPHY\n"));
1718        }
1719}
1720
1721static void _rtl92de_read_macphymode_and_bandtype(struct ieee80211_hw *hw,
1722                                                  u8 *content)
1723{
1724        _rtl92de_read_macphymode_from_prom(hw, content);
1725        rtl92d_phy_config_macphymode(hw);
1726        rtl92d_phy_config_macphymode_info(hw);
1727}
1728
1729static void _rtl92de_efuse_update_chip_version(struct ieee80211_hw *hw)
1730{
1731        struct rtl_priv *rtlpriv = rtl_priv(hw);
1732        enum version_8192d chipver = rtlpriv->rtlhal.version;
1733        u8 cutvalue[2];
1734        u16 chipvalue;
1735
1736        rtlpriv->intf_ops->read_efuse_byte(hw, EEPROME_CHIP_VERSION_H,
1737                                           &cutvalue[1]);
1738        rtlpriv->intf_ops->read_efuse_byte(hw, EEPROME_CHIP_VERSION_L,
1739                                           &cutvalue[0]);
1740        chipvalue = (cutvalue[1] << 8) | cutvalue[0];
1741        switch (chipvalue) {
1742        case 0xAA55:
1743                chipver |= CHIP_92D_C_CUT;
1744                RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("C-CUT!!!\n"));
1745                break;
1746        case 0x9966:
1747                chipver |= CHIP_92D_D_CUT;
1748                RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("D-CUT!!!\n"));
1749                break;
1750        default:
1751                chipver |= CHIP_92D_D_CUT;
1752                RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG, ("Unkown CUT!\n"));
1753                break;
1754        }
1755        rtlpriv->rtlhal.version = chipver;
1756}
1757
1758static void _rtl92de_read_adapter_info(struct ieee80211_hw *hw)
1759{
1760        struct rtl_priv *rtlpriv = rtl_priv(hw);
1761        struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
1762        struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
1763        u16 i, usvalue;
1764        u8 hwinfo[HWSET_MAX_SIZE];
1765        u16 eeprom_id;
1766        unsigned long flags;
1767
1768        if (rtlefuse->epromtype == EEPROM_BOOT_EFUSE) {
1769                spin_lock_irqsave(&globalmutex_for_power_and_efuse, flags);
1770                rtl_efuse_shadow_map_update(hw);
1771                _rtl92de_efuse_update_chip_version(hw);
1772                spin_unlock_irqrestore(&globalmutex_for_power_and_efuse, flags);
1773                memcpy((void *)hwinfo, (void *)&rtlefuse->efuse_map
1774                       [EFUSE_INIT_MAP][0],
1775                       HWSET_MAX_SIZE);
1776        } else if (rtlefuse->epromtype == EEPROM_93C46) {
1777                RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
1778                         ("RTL819X Not boot from eeprom, check it !!"));
1779        }
1780        RT_PRINT_DATA(rtlpriv, COMP_INIT, DBG_DMESG, ("MAP\n"),
1781                      hwinfo, HWSET_MAX_SIZE);
1782
1783        eeprom_id = *((u16 *)&hwinfo[0]);
1784        if (eeprom_id != RTL8190_EEPROM_ID) {
1785                RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
1786                         ("EEPROM ID(%#x) is invalid!!\n", eeprom_id));
1787                rtlefuse->autoload_failflag = true;
1788        } else {
1789                RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("Autoload OK\n"));
1790                rtlefuse->autoload_failflag = false;
1791        }
1792        if (rtlefuse->autoload_failflag) {
1793                RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
1794                         ("RTL819X Not boot from eeprom, check it !!"));
1795                return;
1796        }
1797        rtlefuse->eeprom_oemid = *(u8 *)&hwinfo[EEPROM_CUSTOMER_ID];
1798        _rtl92de_read_macphymode_and_bandtype(hw, hwinfo);
1799
1800        /* VID, DID  SE     0xA-D */
1801        rtlefuse->eeprom_vid = *(u16 *)&hwinfo[EEPROM_VID];
1802        rtlefuse->eeprom_did = *(u16 *)&hwinfo[EEPROM_DID];
1803        rtlefuse->eeprom_svid = *(u16 *)&hwinfo[EEPROM_SVID];
1804        rtlefuse->eeprom_smid = *(u16 *)&hwinfo[EEPROM_SMID];
1805        RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
1806                 ("EEPROMId = 0x%4x\n", eeprom_id));
1807        RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
1808                 ("EEPROM VID = 0x%4x\n", rtlefuse->eeprom_vid));
1809        RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
1810                 ("EEPROM DID = 0x%4x\n", rtlefuse->eeprom_did));
1811        RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
1812                 ("EEPROM SVID = 0x%4x\n", rtlefuse->eeprom_svid));
1813        RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
1814                 ("EEPROM SMID = 0x%4x\n", rtlefuse->eeprom_smid));
1815
1816        /* Read Permanent MAC address */
1817        if (rtlhal->interfaceindex == 0) {
1818                for (i = 0; i < 6; i += 2) {
1819                        usvalue = *(u16 *)&hwinfo[EEPROM_MAC_ADDR_MAC0_92D + i];
1820                        *((u16 *) (&rtlefuse->dev_addr[i])) = usvalue;
1821                }
1822        } else {
1823                for (i = 0; i < 6; i += 2) {
1824                        usvalue = *(u16 *)&hwinfo[EEPROM_MAC_ADDR_MAC1_92D + i];
1825                        *((u16 *) (&rtlefuse->dev_addr[i])) = usvalue;
1826                }
1827        }
1828        rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_ETHER_ADDR,
1829                                      rtlefuse->dev_addr);
1830        RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG,
1831                 ("%pM\n", rtlefuse->dev_addr));
1832        _rtl92de_read_txpower_info(hw, rtlefuse->autoload_failflag, hwinfo);
1833
1834        /* Read Channel Plan */
1835        switch (rtlhal->bandset) {
1836        case BAND_ON_2_4G:
1837                rtlefuse->channel_plan = COUNTRY_CODE_TELEC;
1838                break;
1839        case BAND_ON_5G:
1840                rtlefuse->channel_plan = COUNTRY_CODE_FCC;
1841                break;
1842        case BAND_ON_BOTH:
1843                rtlefuse->channel_plan = COUNTRY_CODE_FCC;
1844                break;
1845        default:
1846                rtlefuse->channel_plan = COUNTRY_CODE_FCC;
1847                break;
1848        }
1849        rtlefuse->eeprom_version = *(u16 *)&hwinfo[EEPROM_VERSION];
1850        rtlefuse->txpwr_fromeprom = true;
1851        RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
1852                 ("EEPROM Customer ID: 0x%2x\n", rtlefuse->eeprom_oemid));
1853}
1854
1855void rtl92de_read_eeprom_info(struct ieee80211_hw *hw)
1856{
1857        struct rtl_priv *rtlpriv = rtl_priv(hw);
1858        struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
1859        struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
1860        u8 tmp_u1b;
1861
1862        rtlhal->version = _rtl92de_read_chip_version(hw);
1863        tmp_u1b = rtl_read_byte(rtlpriv, REG_9346CR);
1864        rtlefuse->autoload_status = tmp_u1b;
1865        if (tmp_u1b & BIT(4)) {
1866                RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, ("Boot from EEPROM\n"));
1867                rtlefuse->epromtype = EEPROM_93C46;
1868        } else {
1869                RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, ("Boot from EFUSE\n"));
1870                rtlefuse->epromtype = EEPROM_BOOT_EFUSE;
1871        }
1872        if (tmp_u1b & BIT(5)) {
1873                RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("Autoload OK\n"));
1874
1875                rtlefuse->autoload_failflag = false;
1876                _rtl92de_read_adapter_info(hw);
1877        } else {
1878                RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, ("Autoload ERR!!\n"));
1879        }
1880        return;
1881}
1882
1883static void rtl92de_update_hal_rate_table(struct ieee80211_hw *hw,
1884                                          struct ieee80211_sta *sta)
1885{
1886        struct rtl_priv *rtlpriv = rtl_priv(hw);
1887        struct rtl_phy *rtlphy = &(rtlpriv->phy);
1888        struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
1889        struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
1890        u32 ratr_value;
1891        u8 ratr_index = 0;
1892        u8 nmode = mac->ht_enable;
1893        u8 mimo_ps = IEEE80211_SMPS_OFF;
1894        u16 shortgi_rate;
1895        u32 tmp_ratr_value;
1896        u8 curtxbw_40mhz = mac->bw_40;
1897        u8 curshortgi_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) ?
1898                                                        1 : 0;
1899        u8 curshortgi_20mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_20) ?
1900                                                        1 : 0;
1901        enum wireless_mode wirelessmode = mac->mode;
1902
1903        if (rtlhal->current_bandtype == BAND_ON_5G)
1904                ratr_value = sta->supp_rates[1] << 4;
1905        else
1906                ratr_value = sta->supp_rates[0];
1907        ratr_value |= (sta->ht_cap.mcs.rx_mask[1] << 20 |
1908                       sta->ht_cap.mcs.rx_mask[0] << 12);
1909        switch (wirelessmode) {
1910        case WIRELESS_MODE_A:
1911                ratr_value &= 0x00000FF0;
1912                break;
1913        case WIRELESS_MODE_B:
1914                if (ratr_value & 0x0000000c)
1915                        ratr_value &= 0x0000000d;
1916                else
1917                        ratr_value &= 0x0000000f;
1918                break;
1919        case WIRELESS_MODE_G:
1920                ratr_value &= 0x00000FF5;
1921                break;
1922        case WIRELESS_MODE_N_24G:
1923        case WIRELESS_MODE_N_5G:
1924                nmode = 1;
1925                if (mimo_ps == IEEE80211_SMPS_STATIC) {
1926                        ratr_value &= 0x0007F005;
1927                } else {
1928                        u32 ratr_mask;
1929
1930                        if (get_rf_type(rtlphy) == RF_1T2R ||
1931                            get_rf_type(rtlphy) == RF_1T1R) {
1932                                ratr_mask = 0x000ff005;
1933                        } else {
1934                                ratr_mask = 0x0f0ff005;
1935                        }
1936
1937                        ratr_value &= ratr_mask;
1938                }
1939                break;
1940        default:
1941                if (rtlphy->rf_type == RF_1T2R)
1942                        ratr_value &= 0x000ff0ff;
1943                else
1944                        ratr_value &= 0x0f0ff0ff;
1945
1946                break;
1947        }
1948        ratr_value &= 0x0FFFFFFF;
1949        if (nmode && ((curtxbw_40mhz && curshortgi_40mhz) ||
1950            (!curtxbw_40mhz && curshortgi_20mhz))) {
1951                ratr_value |= 0x10000000;
1952                tmp_ratr_value = (ratr_value >> 12);
1953                for (shortgi_rate = 15; shortgi_rate > 0; shortgi_rate--) {
1954                        if ((1 << shortgi_rate) & tmp_ratr_value)
1955                                break;
1956                }
1957                shortgi_rate = (shortgi_rate << 12) | (shortgi_rate << 8) |
1958                    (shortgi_rate << 4) | (shortgi_rate);
1959        }
1960        rtl_write_dword(rtlpriv, REG_ARFR0 + ratr_index * 4, ratr_value);
1961        RT_TRACE(rtlpriv, COMP_RATR, DBG_DMESG,
1962                 ("%x\n", rtl_read_dword(rtlpriv, REG_ARFR0)));
1963}
1964
1965static void rtl92de_update_hal_rate_mask(struct ieee80211_hw *hw,
1966                struct ieee80211_sta *sta, u8 rssi_level)
1967{
1968        struct rtl_priv *rtlpriv = rtl_priv(hw);
1969        struct rtl_phy *rtlphy = &(rtlpriv->phy);
1970        struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
1971        struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
1972        struct rtl_sta_info *sta_entry = NULL;
1973        u32 ratr_bitmap;
1974        u8 ratr_index;
1975        u8 curtxbw_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40)
1976                                                        ? 1 : 0;
1977        u8 curshortgi_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) ?
1978                                                        1 : 0;
1979        u8 curshortgi_20mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_20) ?
1980                                                        1 : 0;
1981        enum wireless_mode wirelessmode = 0;
1982        bool shortgi = false;
1983        u32 value[2];
1984        u8 macid = 0;
1985        u8 mimo_ps = IEEE80211_SMPS_OFF;
1986
1987        sta_entry = (struct rtl_sta_info *) sta->drv_priv;
1988        mimo_ps = sta_entry->mimo_ps;
1989        wirelessmode = sta_entry->wireless_mode;
1990        if (mac->opmode == NL80211_IFTYPE_STATION)
1991                curtxbw_40mhz = mac->bw_40;
1992        else if (mac->opmode == NL80211_IFTYPE_AP ||
1993                mac->opmode == NL80211_IFTYPE_ADHOC)
1994                macid = sta->aid + 1;
1995
1996        if (rtlhal->current_bandtype == BAND_ON_5G)
1997                ratr_bitmap = sta->supp_rates[1] << 4;
1998        else
1999                ratr_bitmap = sta->supp_rates[0];
2000        ratr_bitmap |= (sta->ht_cap.mcs.rx_mask[1] << 20 |
2001                        sta->ht_cap.mcs.rx_mask[0] << 12);
2002        switch (wirelessmode) {
2003        case WIRELESS_MODE_B:
2004                ratr_index = RATR_INX_WIRELESS_B;
2005                if (ratr_bitmap & 0x0000000c)
2006                        ratr_bitmap &= 0x0000000d;
2007                else
2008                        ratr_bitmap &= 0x0000000f;
2009                break;
2010        case WIRELESS_MODE_G:
2011                ratr_index = RATR_INX_WIRELESS_GB;
2012
2013                if (rssi_level == 1)
2014                        ratr_bitmap &= 0x00000f00;
2015                else if (rssi_level == 2)
2016                        ratr_bitmap &= 0x00000ff0;
2017                else
2018                        ratr_bitmap &= 0x00000ff5;
2019                break;
2020        case WIRELESS_MODE_A:
2021                ratr_index = RATR_INX_WIRELESS_G;
2022                ratr_bitmap &= 0x00000ff0;
2023                break;
2024        case WIRELESS_MODE_N_24G:
2025        case WIRELESS_MODE_N_5G:
2026                if (wirelessmode == WIRELESS_MODE_N_24G)
2027                        ratr_index = RATR_INX_WIRELESS_NGB;
2028                else
2029                        ratr_index = RATR_INX_WIRELESS_NG;
2030                if (mimo_ps == IEEE80211_SMPS_STATIC) {
2031                        if (rssi_level == 1)
2032                                ratr_bitmap &= 0x00070000;
2033                        else if (rssi_level == 2)
2034                                ratr_bitmap &= 0x0007f000;
2035                        else
2036                                ratr_bitmap &= 0x0007f005;
2037                } else {
2038                        if (rtlphy->rf_type == RF_1T2R ||
2039                            rtlphy->rf_type == RF_1T1R) {
2040                                if (curtxbw_40mhz) {
2041                                        if (rssi_level == 1)
2042                                                ratr_bitmap &= 0x000f0000;
2043                                        else if (rssi_level == 2)
2044                                                ratr_bitmap &= 0x000ff000;
2045                                        else
2046                                                ratr_bitmap &= 0x000ff015;
2047                                } else {
2048                                        if (rssi_level == 1)
2049                                                ratr_bitmap &= 0x000f0000;
2050                                        else if (rssi_level == 2)
2051                                                ratr_bitmap &= 0x000ff000;
2052                                        else
2053                                                ratr_bitmap &= 0x000ff005;
2054                                }
2055                        } else {
2056                                if (curtxbw_40mhz) {
2057                                        if (rssi_level == 1)
2058                                                ratr_bitmap &= 0x0f0f0000;
2059                                        else if (rssi_level == 2)
2060                                                ratr_bitmap &= 0x0f0ff000;
2061                                        else
2062                                                ratr_bitmap &= 0x0f0ff015;
2063                                } else {
2064                                        if (rssi_level == 1)
2065                                                ratr_bitmap &= 0x0f0f0000;
2066                                        else if (rssi_level == 2)
2067                                                ratr_bitmap &= 0x0f0ff000;
2068                                        else
2069                                                ratr_bitmap &= 0x0f0ff005;
2070                                }
2071                        }
2072                }
2073                if ((curtxbw_40mhz && curshortgi_40mhz) ||
2074                    (!curtxbw_40mhz && curshortgi_20mhz)) {
2075
2076                        if (macid == 0)
2077                                shortgi = true;
2078                        else if (macid == 1)
2079                                shortgi = false;
2080                }
2081                break;
2082        default:
2083                ratr_index = RATR_INX_WIRELESS_NGB;
2084
2085                if (rtlphy->rf_type == RF_1T2R)
2086                        ratr_bitmap &= 0x000ff0ff;
2087                else
2088                        ratr_bitmap &= 0x0f0ff0ff;
2089                break;
2090        }
2091
2092        value[0] = (ratr_bitmap & 0x0fffffff) | (ratr_index << 28);
2093        value[1] = macid | (shortgi ? 0x20 : 0x00) | 0x80;
2094        RT_TRACE(rtlpriv, COMP_RATR, DBG_DMESG,
2095                 ("ratr_bitmap :%x value0:%x value1:%x\n",
2096                  ratr_bitmap, value[0], value[1]));
2097        rtl92d_fill_h2c_cmd(hw, H2C_RA_MASK, 5, (u8 *) value);
2098        if (macid != 0)
2099                sta_entry->ratr_index = ratr_index;
2100}
2101
2102void rtl92de_update_hal_rate_tbl(struct ieee80211_hw *hw,
2103                struct ieee80211_sta *sta, u8 rssi_level)
2104{
2105        struct rtl_priv *rtlpriv = rtl_priv(hw);
2106
2107        if (rtlpriv->dm.useramask)
2108                rtl92de_update_hal_rate_mask(hw, sta, rssi_level);
2109        else
2110                rtl92de_update_hal_rate_table(hw, sta);
2111}
2112
2113void rtl92de_update_channel_access_setting(struct ieee80211_hw *hw)
2114{
2115        struct rtl_priv *rtlpriv = rtl_priv(hw);
2116        struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
2117        u16 sifs_timer;
2118
2119        rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SLOT_TIME,
2120                                      (u8 *)&mac->slot_time);
2121        if (!mac->ht_enable)
2122                sifs_timer = 0x0a0a;
2123        else
2124                sifs_timer = 0x1010;
2125        rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SIFS, (u8 *)&sifs_timer);
2126}
2127
2128bool rtl92de_gpio_radio_on_off_checking(struct ieee80211_hw *hw, u8 *valid)
2129{
2130        struct rtl_priv *rtlpriv = rtl_priv(hw);
2131        struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
2132        struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
2133        enum rf_pwrstate e_rfpowerstate_toset;
2134        u8 u1tmp;
2135        bool actuallyset = false;
2136        unsigned long flag;
2137
2138        if (rtlpci->being_init_adapter)
2139                return false;
2140        if (ppsc->swrf_processing)
2141                return false;
2142        spin_lock_irqsave(&rtlpriv->locks.rf_ps_lock, flag);
2143        if (ppsc->rfchange_inprogress) {
2144                spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag);
2145                return false;
2146        } else {
2147                ppsc->rfchange_inprogress = true;
2148                spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag);
2149        }
2150        rtl_write_byte(rtlpriv, REG_MAC_PINMUX_CFG, rtl_read_byte(rtlpriv,
2151                          REG_MAC_PINMUX_CFG) & ~(BIT(3)));
2152        u1tmp = rtl_read_byte(rtlpriv, REG_GPIO_IO_SEL);
2153        e_rfpowerstate_toset = (u1tmp & BIT(3)) ? ERFON : ERFOFF;
2154        if (ppsc->hwradiooff && (e_rfpowerstate_toset == ERFON)) {
2155                RT_TRACE(rtlpriv, COMP_RF, DBG_DMESG,
2156                         ("GPIOChangeRF  - HW Radio ON, RF ON\n"));
2157                e_rfpowerstate_toset = ERFON;
2158                ppsc->hwradiooff = false;
2159                actuallyset = true;
2160        } else if ((ppsc->hwradiooff == false)
2161                && (e_rfpowerstate_toset == ERFOFF)) {
2162                RT_TRACE(rtlpriv, COMP_RF, DBG_DMESG,
2163                         ("GPIOChangeRF  - HW Radio OFF, RF OFF\n"));
2164                e_rfpowerstate_toset = ERFOFF;
2165                ppsc->hwradiooff = true;
2166                actuallyset = true;
2167        }
2168        if (actuallyset) {
2169                spin_lock_irqsave(&rtlpriv->locks.rf_ps_lock, flag);
2170                ppsc->rfchange_inprogress = false;
2171                spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag);
2172        } else {
2173                if (ppsc->reg_rfps_level & RT_RF_OFF_LEVL_HALT_NIC)
2174                        RT_SET_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC);
2175                spin_lock_irqsave(&rtlpriv->locks.rf_ps_lock, flag);
2176                ppsc->rfchange_inprogress = false;
2177                spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag);
2178        }
2179        *valid = 1;
2180        return !ppsc->hwradiooff;
2181}
2182
2183void rtl92de_set_key(struct ieee80211_hw *hw, u32 key_index,
2184                     u8 *p_macaddr, bool is_group, u8 enc_algo,
2185                     bool is_wepkey, bool clear_all)
2186{
2187        struct rtl_priv *rtlpriv = rtl_priv(hw);
2188        struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
2189        struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
2190        u8 *macaddr = p_macaddr;
2191        u32 entry_id;
2192        bool is_pairwise = false;
2193        static u8 cam_const_addr[4][6] = {
2194                {0x00, 0x00, 0x00, 0x00, 0x00, 0x00},
2195                {0x00, 0x00, 0x00, 0x00, 0x00, 0x01},
2196                {0x00, 0x00, 0x00, 0x00, 0x00, 0x02},
2197                {0x00, 0x00, 0x00, 0x00, 0x00, 0x03}
2198        };
2199        static u8 cam_const_broad[] = {
2200                0xff, 0xff, 0xff, 0xff, 0xff, 0xff
2201        };
2202
2203        if (clear_all) {
2204                u8 idx;
2205                u8 cam_offset = 0;
2206                u8 clear_number = 5;
2207                RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, ("clear_all\n"));
2208                for (idx = 0; idx < clear_number; idx++) {
2209                        rtl_cam_mark_invalid(hw, cam_offset + idx);
2210                        rtl_cam_empty_entry(hw, cam_offset + idx);
2211
2212                        if (idx < 5) {
2213                                memset(rtlpriv->sec.key_buf[idx], 0,
2214                                       MAX_KEY_LEN);
2215                                rtlpriv->sec.key_len[idx] = 0;
2216                        }
2217                }
2218        } else {
2219                switch (enc_algo) {
2220                case WEP40_ENCRYPTION:
2221                        enc_algo = CAM_WEP40;
2222                        break;
2223                case WEP104_ENCRYPTION:
2224                        enc_algo = CAM_WEP104;
2225                        break;
2226                case TKIP_ENCRYPTION:
2227                        enc_algo = CAM_TKIP;
2228                        break;
2229                case AESCCMP_ENCRYPTION:
2230                        enc_algo = CAM_AES;
2231                        break;
2232                default:
2233                        RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, ("switch case "
2234                                                "not process\n"));
2235                        enc_algo = CAM_TKIP;
2236                        break;
2237                }
2238                if (is_wepkey || rtlpriv->sec.use_defaultkey) {
2239                        macaddr = cam_const_addr[key_index];
2240                        entry_id = key_index;
2241                } else {
2242                        if (is_group) {
2243                                macaddr = cam_const_broad;
2244                                entry_id = key_index;
2245                        } else {
2246                                if (mac->opmode == NL80211_IFTYPE_AP) {
2247                                        entry_id = rtl_cam_get_free_entry(hw,
2248                                                                 p_macaddr);
2249                                        if (entry_id >=  TOTAL_CAM_ENTRY) {
2250                                                RT_TRACE(rtlpriv, COMP_SEC,
2251                                                         DBG_EMERG, ("Can not "
2252                                                         "find free hw security"
2253                                                         " cam entry\n"));
2254                                                return;
2255                                        }
2256                                } else {
2257                                        entry_id = CAM_PAIRWISE_KEY_POSITION;
2258                                }
2259                                key_index = PAIRWISE_KEYIDX;
2260                                is_pairwise = true;
2261                        }
2262                }
2263                if (rtlpriv->sec.key_len[key_index] == 0) {
2264                        RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
2265                                 ("delete one entry, entry_id is %d\n",
2266                                 entry_id));
2267                        if (mac->opmode == NL80211_IFTYPE_AP)
2268                                rtl_cam_del_entry(hw, p_macaddr);
2269                        rtl_cam_delete_one_entry(hw, p_macaddr, entry_id);
2270                } else {
2271                        RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD,
2272                                 ("The insert KEY length is %d\n",
2273                                  rtlpriv->sec.key_len[PAIRWISE_KEYIDX]));
2274                        RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD,
2275                                 ("The insert KEY  is %x %x\n",
2276                                  rtlpriv->sec.key_buf[0][0],
2277                                  rtlpriv->sec.key_buf[0][1]));
2278                        RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
2279                                 ("add one entry\n"));
2280                        if (is_pairwise) {
2281                                RT_PRINT_DATA(rtlpriv, COMP_SEC, DBG_LOUD,
2282                                              "Pairwiase Key content :",
2283                                              rtlpriv->sec.pairwise_key,
2284                                              rtlpriv->
2285                                              sec.key_len[PAIRWISE_KEYIDX]);
2286                                RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
2287                                         ("set Pairwiase key\n"));
2288                                rtl_cam_add_one_entry(hw, macaddr, key_index,
2289                                                      entry_id, enc_algo,
2290                                                      CAM_CONFIG_NO_USEDK,
2291                                                      rtlpriv->
2292                                                      sec.key_buf[key_index]);
2293                        } else {
2294                                RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
2295                                         ("set group key\n"));
2296                                if (mac->opmode == NL80211_IFTYPE_ADHOC) {
2297                                        rtl_cam_add_one_entry(hw,
2298                                                rtlefuse->dev_addr,
2299                                                PAIRWISE_KEYIDX,
2300                                                CAM_PAIRWISE_KEY_POSITION,
2301                                                enc_algo, CAM_CONFIG_NO_USEDK,
2302                                                rtlpriv->sec.key_buf[entry_id]);
2303                                }
2304                                rtl_cam_add_one_entry(hw, macaddr, key_index,
2305                                                entry_id, enc_algo,
2306                                                CAM_CONFIG_NO_USEDK,
2307                                                rtlpriv->sec.key_buf
2308                                                [entry_id]);
2309                        }
2310                }
2311        }
2312}
2313
2314void rtl92de_suspend(struct ieee80211_hw *hw)
2315{
2316        struct rtl_priv *rtlpriv = rtl_priv(hw);
2317
2318        rtlpriv->rtlhal.macphyctl_reg = rtl_read_byte(rtlpriv,
2319                REG_MAC_PHY_CTRL_NORMAL);
2320}
2321
2322void rtl92de_resume(struct ieee80211_hw *hw)
2323{
2324        struct rtl_priv *rtlpriv = rtl_priv(hw);
2325
2326        rtl_write_byte(rtlpriv, REG_MAC_PHY_CTRL_NORMAL,
2327                       rtlpriv->rtlhal.macphyctl_reg);
2328}
2329