1
2
3
4
5menuconfig USB_SERIAL
6 tristate "USB Serial Converter support"
7 depends on USB
8 ---help---
9 Say Y here if you have a USB device that provides normal serial
10 ports, or acts like a serial device, and you want to connect it to
11 your USB bus.
12
13 Please read <file:Documentation/usb/usb-serial.txt> for more
14 information on the specifics of the different devices that are
15 supported, and on how to use them.
16
17 To compile this driver as a module, choose M here: the
18 module will be called usbserial.
19
20if USB_SERIAL
21
22config USB_SERIAL_CONSOLE
23 bool "USB Serial Console device support"
24 depends on USB_SERIAL=y
25 ---help---
26 If you say Y here, it will be possible to use a USB to serial
27 converter port as the system console (the system console is the
28 device which receives all kernel messages and warnings and which
29 allows logins in single user mode). This could be useful if some
30 terminal or printer is connected to that serial port.
31
32 Even if you say Y here, the currently visible virtual console
33 (/dev/tty0) will still be used as the system console by default, but
34 you can alter that using a kernel command line option such as
35 "console=ttyUSB0". (Try "man bootparam" or see the documentation of
36 your boot loader (lilo or loadlin) about how to pass options to the
37 kernel at boot time.)
38
39 If you don't have a VGA card installed and you say Y here, the
40 kernel will automatically use the first USB to serial converter
41 port, /dev/ttyUSB0, as system console.
42
43 If unsure, say N.
44
45config USB_EZUSB
46 bool "Functions for loading firmware on EZUSB chips"
47 help
48 Say Y here if you need EZUSB device support.
49
50config USB_SERIAL_GENERIC
51 bool "USB Generic Serial Driver"
52 help
53 Say Y here if you want to use the generic USB serial driver. Please
54 read <file:Documentation/usb/usb-serial.txt> for more information on
55 using this driver. It is recommended that the "USB Serial converter
56 support" be compiled as a module for this driver to be used
57 properly.
58
59config USB_SERIAL_AIRCABLE
60 tristate "USB AIRcable Bluetooth Dongle Driver"
61 help
62 Say Y here if you want to use USB AIRcable Bluetooth Dongle.
63
64 To compile this driver as a module, choose M here: the module
65 will be called aircable.
66
67config USB_SERIAL_ARK3116
68 tristate "USB ARK Micro 3116 USB Serial Driver"
69 help
70 Say Y here if you want to use a ARK Micro 3116 USB to Serial
71 device.
72
73 To compile this driver as a module, choose M here: the
74 module will be called ark3116
75
76config USB_SERIAL_BELKIN
77 tristate "USB Belkin and Peracom Single Port Serial Driver"
78 help
79 Say Y here if you want to use a Belkin USB Serial single port
80 adaptor (F5U103 is one of the model numbers) or the Peracom single
81 port USB to serial adapter.
82
83 To compile this driver as a module, choose M here: the
84 module will be called belkin_sa.
85
86config USB_SERIAL_CH341
87 tristate "USB Winchiphead CH341 Single Port Serial Driver"
88 help
89 Say Y here if you want to use a Winchiphead CH341 single port
90 USB to serial adapter.
91
92 To compile this driver as a module, choose M here: the
93 module will be called ch341.
94
95config USB_SERIAL_WHITEHEAT
96 tristate "USB ConnectTech WhiteHEAT Serial Driver"
97 select USB_EZUSB
98 help
99 Say Y here if you want to use a ConnectTech WhiteHEAT 4 port
100 USB to serial converter device.
101
102 To compile this driver as a module, choose M here: the
103 module will be called whiteheat.
104
105config USB_SERIAL_DIGI_ACCELEPORT
106 tristate "USB Digi International AccelePort USB Serial Driver"
107 ---help---
108 Say Y here if you want to use Digi AccelePort USB 2 or 4 devices,
109 2 port (plus parallel port) and 4 port USB serial converters. The
110 parallel port on the USB 2 appears as a third serial port on Linux.
111 The Digi Acceleport USB 8 is not yet supported by this driver.
112
113 This driver works under SMP with the usb-uhci driver. It does not
114 work under SMP with the uhci driver.
115
116 To compile this driver as a module, choose M here: the
117 module will be called digi_acceleport.
118
119config USB_SERIAL_CP210X
120 tristate "USB CP210x family of UART Bridge Controllers"
121 help
122 Say Y here if you want to use a CP2101/CP2102/CP2103 based USB
123 to RS232 converters.
124
125 To compile this driver as a module, choose M here: the
126 module will be called cp210x.
127
128config USB_SERIAL_CYPRESS_M8
129 tristate "USB Cypress M8 USB Serial Driver"
130 help
131 Say Y here if you want to use a device that contains the Cypress
132 USB to Serial microcontroller, such as the DeLorme Earthmate GPS.
133
134 Attempted SMP support... send bug reports!
135
136 Supported microcontrollers in the CY4601 family are:
137 CY7C63741 CY7C63742 CY7C63743 CY7C64013
138
139 To compile this driver as a module, choose M here: the
140 module will be called cypress_m8.
141
142config USB_SERIAL_EMPEG
143 tristate "USB Empeg empeg-car Mark I/II Driver"
144 help
145 Say Y here if you want to connect to your Empeg empeg-car Mark I/II
146 mp3 player via USB. The driver uses a single ttyUSB{0,1,2,...}
147 device node. See <file:Documentation/usb/usb-serial.txt> for more
148 tidbits of information.
149
150 To compile this driver as a module, choose M here: the
151 module will be called empeg.
152
153config USB_SERIAL_FTDI_SIO
154 tristate "USB FTDI Single Port Serial Driver"
155 ---help---
156 Say Y here if you want to use a FTDI SIO single port USB to serial
157 converter device. The implementation I have is called the USC-1000.
158 This driver has also be tested with the 245 and 232 devices.
159
160 See <http://ftdi-usb-sio.sourceforge.net/> for more
161 information on this driver and the device.
162
163 To compile this driver as a module, choose M here: the
164 module will be called ftdi_sio.
165
166config USB_SERIAL_FUNSOFT
167 tristate "USB Fundamental Software Dongle Driver"
168 ---help---
169 Say Y here if you want to use the Fundamental Software dongle.
170
171 To compile this driver as a module, choose M here: the
172 module will be called funsoft.
173
174config USB_SERIAL_VISOR
175 tristate "USB Handspring Visor / Palm m50x / Sony Clie Driver"
176 help
177 Say Y here if you want to connect to your HandSpring Visor, Palm
178 m500 or m505 through its USB docking station. See
179 <http://usbvisor.sourceforge.net/index.php3> for more information on using this
180 driver.
181
182 To compile this driver as a module, choose M here: the
183 module will be called visor.
184
185config USB_SERIAL_IPAQ
186 tristate "USB PocketPC PDA Driver"
187 help
188 Say Y here if you want to connect to your Compaq iPAQ, HP Jornada
189 or any other PDA running Windows CE 3.0 or PocketPC 2002
190 using a USB cradle/cable. For information on using the driver,
191 read <file:Documentation/usb/usb-serial.txt>.
192
193 To compile this driver as a module, choose M here: the
194 module will be called ipaq.
195
196config USB_SERIAL_IR
197 tristate "USB IR Dongle Serial Driver"
198 help
199 Say Y here if you want to enable simple serial support for USB IrDA
200 devices. This is useful if you do not want to use the full IrDA
201 stack.
202
203 To compile this driver as a module, choose M here: the
204 module will be called ir-usb.
205
206config USB_SERIAL_EDGEPORT
207 tristate "USB Inside Out Edgeport Serial Driver"
208 ---help---
209 Say Y here if you want to use any of the following devices from
210 Inside Out Networks (Digi):
211 Edgeport/4
212 Rapidport/4
213 Edgeport/4t
214 Edgeport/2
215 Edgeport/4i
216 Edgeport/2i
217 Edgeport/421
218 Edgeport/21
219 Edgeport/8
220 Edgeport/8 Dual
221 Edgeport/2D8
222 Edgeport/4D8
223 Edgeport/8i
224 Edgeport/2 DIN
225 Edgeport/4 DIN
226 Edgeport/16 Dual
227
228 To compile this driver as a module, choose M here: the
229 module will be called io_edgeport.
230
231config USB_SERIAL_EDGEPORT_TI
232 tristate "USB Inside Out Edgeport Serial Driver (TI devices)"
233 help
234 Say Y here if you want to use any of the devices from Inside Out
235 Networks (Digi) that are not supported by the io_edgeport driver.
236 This includes the Edgeport/1 device.
237
238 To compile this driver as a module, choose M here: the
239 module will be called io_ti.
240
241config USB_SERIAL_GARMIN
242 tristate "USB Garmin GPS driver"
243 help
244 Say Y here if you want to connect to your Garmin GPS.
245 Should work with most Garmin GPS devices which have a native USB port.
246
247 See <http://sourceforge.net/projects/garmin-gps> for the latest
248 version of the driver.
249
250 To compile this driver as a module, choose M here: the
251 module will be called garmin_gps.
252
253config USB_SERIAL_IPW
254 tristate "USB IPWireless (3G UMTS TDD) Driver"
255 select USB_SERIAL_WWAN
256 help
257 Say Y here if you want to use a IPWireless USB modem such as
258 the ones supplied by Axity3G/Sentech South Africa.
259
260 To compile this driver as a module, choose M here: the
261 module will be called ipw.
262
263config USB_SERIAL_IUU
264 tristate "USB Infinity USB Unlimited Phoenix Driver"
265 help
266 Say Y here if you want to use a IUU in phoenix mode and get
267 an extra ttyUSBx device. More information available on
268 http://eczema.ecze.com/iuu_phoenix.html
269
270 To compile this driver as a module, choose M here: the
271 module will be called iuu_phoenix.o
272
273config USB_SERIAL_KEYSPAN_PDA
274 tristate "USB Keyspan PDA Single Port Serial Driver"
275 select USB_EZUSB
276 help
277 Say Y here if you want to use a Keyspan PDA single port USB to
278 serial converter device. This driver makes use of firmware
279 developed from scratch by Brian Warner.
280
281 To compile this driver as a module, choose M here: the
282 module will be called keyspan_pda.
283
284config USB_SERIAL_KEYSPAN
285 tristate "USB Keyspan USA-xxx Serial Driver"
286 select USB_EZUSB
287 ---help---
288 Say Y here if you want to use Keyspan USB to serial converter
289 devices. This driver makes use of Keyspan's official firmware
290 and was developed with their support. You must also include
291 firmware to support your particular device(s).
292
293 See <http://blemings.org/hugh/keyspan.html> for more information.
294
295 To compile this driver as a module, choose M here: the
296 module will be called keyspan.
297
298config USB_SERIAL_KEYSPAN_MPR
299 bool "USB Keyspan MPR Firmware"
300 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
301 help
302 Say Y here to include firmware for the Keyspan MPR converter.
303
304config USB_SERIAL_KEYSPAN_USA28
305 bool "USB Keyspan USA-28 Firmware"
306 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
307 help
308 Say Y here to include firmware for the USA-28 converter.
309
310config USB_SERIAL_KEYSPAN_USA28X
311 bool "USB Keyspan USA-28X Firmware"
312 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
313 help
314 Say Y here to include firmware for the USA-28X converter.
315 Be sure you have a USA-28X, there are also 28XA and 28XB
316 models, the label underneath has the actual part number.
317
318config USB_SERIAL_KEYSPAN_USA28XA
319 bool "USB Keyspan USA-28XA Firmware"
320 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
321 help
322 Say Y here to include firmware for the USA-28XA converter.
323 Be sure you have a USA-28XA, there are also 28X and 28XB
324 models, the label underneath has the actual part number.
325
326config USB_SERIAL_KEYSPAN_USA28XB
327 bool "USB Keyspan USA-28XB Firmware"
328 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
329 help
330 Say Y here to include firmware for the USA-28XB converter.
331 Be sure you have a USA-28XB, there are also 28X and 28XA
332 models, the label underneath has the actual part number.
333
334config USB_SERIAL_KEYSPAN_USA19
335 bool "USB Keyspan USA-19 Firmware"
336 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
337 help
338 Say Y here to include firmware for the USA-19 converter.
339
340config USB_SERIAL_KEYSPAN_USA18X
341 bool "USB Keyspan USA-18X Firmware"
342 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
343 help
344 Say Y here to include firmware for the USA-18X converter.
345
346config USB_SERIAL_KEYSPAN_USA19W
347 bool "USB Keyspan USA-19W Firmware"
348 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
349 help
350 Say Y here to include firmware for the USA-19W converter.
351
352config USB_SERIAL_KEYSPAN_USA19QW
353 bool "USB Keyspan USA-19QW Firmware"
354 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
355 help
356 Say Y here to include firmware for the USA-19QW converter.
357
358config USB_SERIAL_KEYSPAN_USA19QI
359 bool "USB Keyspan USA-19QI Firmware"
360 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
361 help
362 Say Y here to include firmware for the USA-19QI converter.
363
364config USB_SERIAL_KEYSPAN_USA49W
365 bool "USB Keyspan USA-49W Firmware"
366 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
367 help
368 Say Y here to include firmware for the USA-49W converter.
369
370config USB_SERIAL_KEYSPAN_USA49WLC
371 bool "USB Keyspan USA-49WLC Firmware"
372 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
373 help
374 Say Y here to include firmware for the USA-49WLC converter.
375
376config USB_SERIAL_KLSI
377 tristate "USB KL5KUSB105 (Palmconnect) Driver"
378 ---help---
379 Say Y here if you want to use a KL5KUSB105 - based single port
380 serial adapter. The most widely known -- and currently the only
381 tested -- device in this category is the PalmConnect USB Serial
382 adapter sold by Palm Inc. for use with their Palm III and Palm V
383 series PDAs.
384
385 Please read <file:Documentation/usb/usb-serial.txt> for more
386 information.
387
388 To compile this driver as a module, choose M here: the
389 module will be called kl5kusb105.
390
391config USB_SERIAL_KOBIL_SCT
392 tristate "USB KOBIL chipcard reader"
393 ---help---
394 Say Y here if you want to use one of the following KOBIL USB chipcard
395 readers:
396
397 - USB TWIN
398 - KAAN Standard Plus
399 - KAAN SIM
400 - SecOVID Reader Plus
401 - B1 Professional
402 - KAAN Professional
403
404 Note that you need a current CT-API.
405 To compile this driver as a module, choose M here: the
406 module will be called kobil_sct.
407
408config USB_SERIAL_MCT_U232
409 tristate "USB MCT Single Port Serial Driver"
410 ---help---
411 Say Y here if you want to use a USB Serial single port adapter from
412 Magic Control Technology Corp. (U232 is one of the model numbers).
413
414 This driver also works with Sitecom U232-P25 and D-Link DU-H3SP USB
415 BAY, Belkin F5U109, and Belkin F5U409 devices.
416
417 To compile this driver as a module, choose M here: the
418 module will be called mct_u232.
419
420config USB_SERIAL_MOS7720
421 tristate "USB Moschip 7720 Serial Driver"
422 ---help---
423 Say Y here if you want to use USB Serial single and double
424 port adapters from Moschip Semiconductor Tech.
425
426 To compile this driver as a module, choose M here: the
427 module will be called mos7720.
428
429config USB_SERIAL_MOS7715_PARPORT
430 bool "Support for parallel port on the Moschip 7715"
431 depends on USB_SERIAL_MOS7720
432 depends on PARPORT=y || PARPORT=USB_SERIAL_MOS7720
433 select PARPORT_NOT_PC
434 ---help---
435 Say Y if you have a Moschip 7715 device and would like to use
436 the parallel port it provides. The port will register with
437 the parport subsystem as a low-level driver.
438
439config USB_SERIAL_MOS7840
440 tristate "USB Moschip 7840/7820 USB Serial Driver"
441 ---help---
442 Say Y here if you want to use a MCS7840 Quad-Serial or MCS7820
443 Dual-Serial port device from MosChip Semiconductor.
444
445 The MCS7840 and MCS7820 have been developed to connect a wide range
446 of standard serial devices to a USB host. The MCS7840 has a USB
447 device controller connected to four (4) individual UARTs while the
448 MCS7820 controller connects to two (2) individual UARTs.
449
450 To compile this driver as a module, choose M here: the
451 module will be called mos7840. If unsure, choose N.
452
453config USB_SERIAL_MOTOROLA
454 tristate "USB Motorola Phone modem driver"
455 ---help---
456 Say Y here if you want to use a Motorola phone with a USB
457 connector as a modem link.
458
459 To compile this driver as a module, choose M here: the
460 module will be called moto_modem. If unsure, choose N.
461
462config USB_SERIAL_NAVMAN
463 tristate "USB Navman GPS device"
464 help
465 To compile this driver as a module, choose M here: the
466 module will be called navman.
467
468config USB_SERIAL_PL2303
469 tristate "USB Prolific 2303 Single Port Serial Driver"
470 help
471 Say Y here if you want to use the PL2303 USB Serial single port
472 adapter from Prolific.
473
474 To compile this driver as a module, choose M here: the
475 module will be called pl2303.
476
477config USB_SERIAL_OTI6858
478 tristate "USB Ours Technology Inc. OTi-6858 USB To RS232 Bridge Controller"
479 help
480 Say Y here if you want to use the OTi-6858 single port USB to serial
481 converter device.
482
483 To compile this driver as a module, choose M here: the
484 module will be called oti6858.
485
486config USB_SERIAL_QCAUX
487 tristate "USB Qualcomm Auxiliary Serial Port Driver"
488 help
489 Say Y here if you want to use the auxiliary serial ports provided
490 by many modems based on Qualcomm chipsets. These ports often use
491 a proprietary protocol called DM and cannot be used for AT- or
492 PPP-based communication.
493
494 To compile this driver as a module, choose M here: the
495 module will be called qcaux. If unsure, choose N.
496
497config USB_SERIAL_QUALCOMM
498 tristate "USB Qualcomm Serial modem"
499 select USB_SERIAL_WWAN
500 help
501 Say Y here if you have a Qualcomm USB modem device. These are
502 usually wireless cellular modems.
503
504 To compile this driver as a module, choose M here: the
505 module will be called qcserial.
506
507config USB_SERIAL_SPCP8X5
508 tristate "USB SPCP8x5 USB To Serial Driver"
509 help
510 Say Y here if you want to use the spcp8x5 converter chip. This is
511 commonly found in some Z-Wave USB devices.
512
513 To compile this driver as a module, choose M here: the
514 module will be called spcp8x5.
515
516config USB_SERIAL_HP4X
517 tristate "USB HP4x Calculators support"
518 help
519 Say Y here if you want to use an Hewlett-Packard 4x Calculator.
520
521 To compile this driver as a module, choose M here: the
522 module will be called hp4x.
523
524config USB_SERIAL_SAFE
525 tristate "USB Safe Serial (Encapsulated) Driver"
526
527config USB_SERIAL_SAFE_PADDED
528 bool "USB Secure Encapsulated Driver - Padded"
529 depends on USB_SERIAL_SAFE
530
531config USB_SERIAL_SIEMENS_MPI
532 tristate "USB Siemens MPI driver"
533 help
534 Say M here if you want to use a Siemens USB/MPI adapter.
535
536 To compile this driver as a module, choose M here: the
537 module will be called siemens_mpi.
538
539config USB_SERIAL_SIERRAWIRELESS
540 tristate "USB Sierra Wireless Driver"
541 help
542 Say M here if you want to use Sierra Wireless devices.
543
544 Many devices have a feature known as TRU-Install. For those devices
545 to work properly, the USB Storage Sierra feature must be enabled.
546
547 To compile this driver as a module, choose M here: the
548 module will be called sierra.
549
550config USB_SERIAL_SYMBOL
551 tristate "USB Symbol Barcode driver (serial mode)"
552 help
553 Say Y here if you want to use a Symbol USB Barcode device
554 in serial emulation mode.
555
556 To compile this driver as a module, choose M here: the
557 module will be called symbolserial.
558
559config USB_SERIAL_TI
560 tristate "USB TI 3410/5052 Serial Driver"
561 help
562 Say Y here if you want to use the TI USB 3410 or 5052
563 serial devices.
564
565 To compile this driver as a module, choose M here: the
566 module will be called ti_usb_3410_5052.
567
568config USB_SERIAL_CYBERJACK
569 tristate "USB REINER SCT cyberJack pinpad/e-com chipcard reader"
570 ---help---
571 Say Y here if you want to use a cyberJack pinpad/e-com USB chipcard
572 reader. This is an interface to ISO 7816 compatible contact-based
573 chipcards, e.g. GSM SIMs.
574
575 To compile this driver as a module, choose M here: the
576 module will be called cyberjack.
577
578 If unsure, say N.
579
580config USB_SERIAL_XIRCOM
581 tristate "USB Xircom / Entregra Single Port Serial Driver"
582 select USB_EZUSB
583 help
584 Say Y here if you want to use a Xircom or Entregra single port USB to
585 serial converter device. This driver makes use of firmware
586 developed from scratch by Brian Warner.
587
588 To compile this driver as a module, choose M here: the
589 module will be called keyspan_pda.
590
591config USB_SERIAL_WWAN
592 tristate
593
594config USB_SERIAL_OPTION
595 tristate "USB driver for GSM and CDMA modems"
596 select USB_SERIAL_WWAN
597 help
598 Say Y here if you have a GSM or CDMA modem that's connected to USB.
599
600 This driver also supports several PCMCIA cards which have a
601 built-in OHCI-USB adapter and an internally-connected GSM modem.
602 The USB bus on these cards is not accessible externally.
603
604 Supported devices include (some of?) those made by:
605 Option, Huawei, Audiovox, Novatel Wireless, or Anydata.
606
607 To compile this driver as a module, choose M here: the
608 module will be called option.
609
610 If this driver doesn't recognize your device,
611 it might be accessible via the FTDI_SIO driver.
612
613config USB_SERIAL_OMNINET
614 tristate "USB ZyXEL omni.net LCD Plus Driver"
615 help
616 Say Y here if you want to use a ZyXEL omni.net LCD ISDN TA.
617
618 To compile this driver as a module, choose M here: the
619 module will be called omninet.
620
621config USB_SERIAL_OPTICON
622 tristate "USB Opticon Barcode driver (serial mode)"
623 help
624 Say Y here if you want to use a Opticon USB Barcode device
625 in serial emulation mode.
626
627 To compile this driver as a module, choose M here: the
628 module will be called opticon.
629
630config USB_SERIAL_VIVOPAY_SERIAL
631 tristate "USB ViVOpay serial interface driver"
632 help
633 Say Y here if you want to use a ViVOtech ViVOpay USB device.
634
635 To compile this driver as a module, choose M here: the
636 module will be called vivopay-serial.
637
638config USB_SERIAL_ZIO
639 tristate "ZIO Motherboard USB serial interface driver"
640 help
641 Say Y here if you want to use ZIO Motherboard.
642
643 To compile this driver as a module, choose M here: the
644 module will be called zio.
645
646config USB_SERIAL_SSU100
647 tristate "USB Quatech SSU-100 Single Port Serial Driver"
648 help
649 Say Y here if you want to use the Quatech SSU-100 single
650 port usb to serial adapter.
651
652 To compile this driver as a module, choose M here: the
653 module will be called ssu100.
654
655config USB_SERIAL_DEBUG
656 tristate "USB Debugging Device"
657 help
658 Say Y here if you have a USB debugging device used to receive
659 debugging data from another machine. The most common of these
660 devices is the NetChip TurboCONNECT device.
661
662 To compile this driver as a module, choose M here: the
663 module will be called usb-debug.
664
665endif
666
