LXR linux/arch/arm/mach-omap2/sram243x.S

   1/*
   2 * linux/arch/arm/mach-omap2/sram243x.S
   3 *
   4 * Omap2 specific functions that need to be run in internal SRAM
   5 *
   6 * (C) Copyright 2004
   7 * Texas Instruments, <www.ti.com>
   8 * Richard Woodruff <r-woodruff2@ti.com>
   9 *
  10 * This program is free software; you can redistribute it and/or
  11 * modify it under the terms of the GNU General Public License as
  12 * published by the Free Software Foundation; either version 2 of
  13 * the License, or (at your option) any later version.
  14 *
  15 * This program is distributed in the hope that it will be useful,
  16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
  17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
  18 * GNU General Public License for more details.
  19 *
  20 * You should have received a copy of the GNU General Public License
  21 * along with this program; if not, write to the Free Software
  22 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  23 * MA 02111-1307 USA
  24 *
  25 * Richard Woodruff notes that any changes to this code must be carefully
  26 * audited and tested to ensure that they don't cause a TLB miss while
  27 * the SDRAM is inaccessible.  Such a situation will crash the system
  28 * since it will cause the ARM MMU to attempt to walk the page tables.
  29 * These crashes may be intermittent.
  30 */
  31#include <linux/linkage.h>
  32#include <asm/assembler.h>
  33#include <mach/io.h>
  34#include <mach/hardware.h>
  35
  36#include "prm2xxx_3xxx.h"
  37#include "cm2xxx_3xxx.h"
  38#include "sdrc.h"
  39
  40        .text
  41
  42        .align  3
  43ENTRY(omap243x_sram_ddr_init)
  44        stmfd   sp!, {r0 - r12, lr}     @ save registers on stack
  45
  46        mov     r12, r2                 @ capture CS1 vs CS0
  47        mov     r8, r3                  @ capture force parameter
  48
  49        /* frequency shift down */
  50        ldr     r2, omap243x_sdi_cm_clksel2_pll @ get address of dpllout reg
  51        mov     r3, #0x1                @ value for 1x operation
  52        str     r3, [r2]                @ go to L1-freq operation
  53
  54        /* voltage shift down */
  55        mov r9, #0x1                    @ set up for L1 voltage call
  56        bl voltage_shift                @ go drop voltage
  57
  58        /* dll lock mode */
  59        ldr     r11, omap243x_sdi_sdrc_dlla_ctrl        @ addr of dlla ctrl
  60        ldr     r10, [r11]              @ get current val
  61        cmp     r12, #0x1               @ cs1 base (2422 es2.05/1)
  62        addeq   r11, r11, #0x8          @ if cs1 base, move to DLLB
  63        mvn     r9, #0x4                @ mask to get clear bit2
  64        and     r10, r10, r9            @ clear bit2 for lock mode.
  65        orr     r10, r10, #0x8          @ make sure DLL on (es2 bit pos)
  66        orr     r10, r10, #0x2          @ 90 degree phase for all below 133Mhz
  67        str     r10, [r11]              @ commit to DLLA_CTRL
  68        bl      i_dll_wait              @ wait for dll to lock
  69
  70        /* get dll value */
  71        add     r11, r11, #0x4          @ get addr of status reg
  72        ldr     r10, [r11]              @ get locked value
  73
  74        /* voltage shift up */
  75        mov r9, #0x0                    @ shift back to L0-voltage
  76        bl voltage_shift                @ go raise voltage
  77
  78        /* frequency shift up */
  79        mov     r3, #0x2                @ value for 2x operation
  80        str     r3, [r2]                @ go to L0-freq operation
  81
  82        /* reset entry mode for dllctrl */
  83        sub     r11, r11, #0x4          @ move from status to ctrl
  84        cmp     r12, #0x1               @ normalize if cs1 based
  85        subeq   r11, r11, #0x8          @ possibly back to DLLA
  86        cmp     r8, #0x1                @ if forced unlock exit
  87        orreq   r1, r1, #0x4            @ make sure exit with unlocked value
  88        str     r1, [r11]               @ restore DLLA_CTRL high value
  89        add     r11, r11, #0x8          @ move to DLLB_CTRL addr
  90        str     r1, [r11]               @ set value DLLB_CTRL
  91        bl      i_dll_wait              @ wait for possible lock
  92
  93        /* set up for return, DDR should be good */
  94        str r10, [r0]                   @ write dll_status and return counter
  95        ldmfd   sp!, {r0 - r12, pc}     @ restore regs and return
  96
  97        /* ensure the DLL has relocked */
  98i_dll_wait:
  99        mov     r4, #0x800              @ delay DLL relock, min 0x400 L3 clocks
 100i_dll_delay:
 101        subs    r4, r4, #0x1
 102        bne     i_dll_delay
 103        mov     pc, lr
 104
 105        /*
 106         * shift up or down voltage, use R9 as input to tell level.
 107         * wait for it to finish, use 32k sync counter, 1tick=31uS.
 108         */
 109voltage_shift:
 110        ldr     r4, omap243x_sdi_prcm_voltctrl  @ get addr of volt ctrl.
 111        ldr     r5, [r4]                @ get value.
 112        ldr     r6, prcm_mask_val       @ get value of mask
 113        and     r5, r5, r6              @ apply mask to clear bits
 114        orr     r5, r5, r9              @ bulld value for L0/L1-volt operation.
 115        str     r5, [r4]                @ set up for change.
 116        mov     r3, #0x4000             @ get val for force
 117        orr     r5, r5, r3              @ build value for force
 118        str     r5, [r4]                @ Force transition to L1
 119
 120        ldr     r3, omap243x_sdi_timer_32ksynct_cr      @ get addr of counter
 121        ldr     r5, [r3]                @ get value
 122        add     r5, r5, #0x3            @ give it at most 93uS
 123volt_delay:
 124        ldr     r7, [r3]                @ get timer value
 125        cmp     r5, r7                  @ time up?
 126        bhi     volt_delay              @ not yet->branch
 127        mov     pc, lr                  @ back to caller.
 128
 129omap243x_sdi_cm_clksel2_pll:
 130        .word OMAP2430_CM_REGADDR(PLL_MOD, CM_CLKSEL2)
 131omap243x_sdi_sdrc_dlla_ctrl:
 132        .word OMAP243X_SDRC_REGADDR(SDRC_DLLA_CTRL)
 133omap243x_sdi_prcm_voltctrl:
 134        .word OMAP2430_PRCM_VOLTCTRL
 135prcm_mask_val:
 136        .word 0xFFFF3FFC
 137omap243x_sdi_timer_32ksynct_cr:
 138        .word OMAP2_L4_IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010)
 139ENTRY(omap243x_sram_ddr_init_sz)
 140        .word   . - omap243x_sram_ddr_init
 141
 142/*
 143 * Reprograms memory timings.
 144 * r0 = [PRCM_FULL | PRCM_HALF] r1 = SDRC_DLLA_CTRL value r2 = [DDR | SDR]
 145 * PRCM_FULL = 2, PRCM_HALF = 1, DDR = 1, SDR = 0
 146 */
 147        .align  3
 148ENTRY(omap243x_sram_reprogram_sdrc)
 149        stmfd   sp!, {r0 - r10, lr}     @ save registers on stack
 150        mov     r3, #0x0                @ clear for mrc call
 151        mcr     p15, 0, r3, c7, c10, 4  @ memory barrier, finish ARM SDR/DDR
 152        nop
 153        nop
 154        ldr     r6, omap243x_srs_sdrc_rfr_ctrl  @ get addr of refresh reg
 155        ldr     r5, [r6]                @ get value
 156        mov     r5, r5, lsr #8          @ isolate rfr field and drop burst
 157
 158        cmp     r0, #0x1                @ going to half speed?
 159        movne   r9, #0x0                @ if up set flag up for pre up, hi volt
 160
 161        blne    voltage_shift_c         @ adjust voltage
 162
 163        cmp     r0, #0x1                @ going to half speed (post branch link)
 164        moveq   r5, r5, lsr #1          @ divide by 2 if to half
 165        movne   r5, r5, lsl #1          @ mult by 2 if to full
 166        mov     r5, r5, lsl #8          @ put rfr field back into place
 167        add     r5, r5, #0x1            @ turn on burst of 1
 168        ldr     r4, omap243x_srs_cm_clksel2_pll @ get address of out reg
 169        ldr     r3, [r4]                @ get curr value
 170        orr     r3, r3, #0x3
 171        bic     r3, r3, #0x3            @ clear lower bits
 172        orr     r3, r3, r0              @ new state value
 173        str     r3, [r4]                @ set new state (pll/x, x=1 or 2)
 174        nop
 175        nop
 176
 177        moveq   r9, #0x1                @ if speed down, post down, drop volt
 178        bleq    voltage_shift_c
 179
 180        mcr     p15, 0, r3, c7, c10, 4  @ memory barrier
 181        str     r5, [r6]                @ set new RFR_1 value
 182        add     r6, r6, #0x30           @ get RFR_2 addr
 183        str     r5, [r6]                @ set RFR_2
 184        nop
 185        cmp     r2, #0x1                @ (SDR or DDR) do we need to adjust DLL
 186        bne     freq_out                @ leave if SDR, no DLL function
 187
 188        /* With DDR, we need to take care of the DLL for the frequency change */
 189        ldr     r2, omap243x_srs_sdrc_dlla_ctrl @ addr of dlla ctrl
 190        str     r1, [r2]                @ write out new SDRC_DLLA_CTRL
 191        add     r2, r2, #0x8            @ addr to SDRC_DLLB_CTRL
 192        str     r1, [r2]                @ commit to SDRC_DLLB_CTRL
 193        mov     r1, #0x2000             @ wait DLL relock, min 0x400 L3 clocks
 194dll_wait:
 195        subs    r1, r1, #0x1
 196        bne     dll_wait
 197freq_out:
 198        ldmfd   sp!, {r0 - r10, pc}     @ restore regs and return
 199
 200    /*
 201     * shift up or down voltage, use R9 as input to tell level.
 202     *  wait for it to finish, use 32k sync counter, 1tick=31uS.
 203     */
 204voltage_shift_c:
 205        ldr     r10, omap243x_srs_prcm_voltctrl @ get addr of volt ctrl
 206        ldr     r8, [r10]               @ get value
 207        ldr     r7, ddr_prcm_mask_val   @ get value of mask
 208        and     r8, r8, r7              @ apply mask to clear bits
 209        orr     r8, r8, r9              @ bulld value for L0/L1-volt operation.
 210        str     r8, [r10]               @ set up for change.
 211        mov     r7, #0x4000             @ get val for force
 212        orr     r8, r8, r7              @ build value for force
 213        str     r8, [r10]               @ Force transition to L1
 214
 215        ldr     r10, omap243x_srs_timer_32ksynct        @ get addr of counter
 216        ldr     r8, [r10]               @ get value
 217        add     r8, r8, #0x2            @ give it at most 62uS (min 31+)
 218volt_delay_c:
 219        ldr     r7, [r10]               @ get timer value
 220        cmp     r8, r7                  @ time up?
 221        bhi     volt_delay_c            @ not yet->branch
 222        mov     pc, lr                  @ back to caller
 223
 224omap243x_srs_cm_clksel2_pll:
 225        .word OMAP2430_CM_REGADDR(PLL_MOD, CM_CLKSEL2)
 226omap243x_srs_sdrc_dlla_ctrl:
 227        .word OMAP243X_SDRC_REGADDR(SDRC_DLLA_CTRL)
 228omap243x_srs_sdrc_rfr_ctrl:
 229        .word OMAP243X_SDRC_REGADDR(SDRC_RFR_CTRL_0)
 230omap243x_srs_prcm_voltctrl:
 231        .word OMAP2430_PRCM_VOLTCTRL
 232ddr_prcm_mask_val:
 233        .word 0xFFFF3FFC
 234omap243x_srs_timer_32ksynct:
 235        .word OMAP2_L4_IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010)
 236
 237ENTRY(omap243x_sram_reprogram_sdrc_sz)
 238        .word   . - omap243x_sram_reprogram_sdrc
 239
 240/*
 241 * Set dividers and pll. Also recalculate DLL value for DDR and unlock mode.
 242 */
 243        .align  3
 244ENTRY(omap243x_sram_set_prcm)
 245        stmfd   sp!, {r0-r12, lr}       @ regs to stack
 246        adr     r4, pbegin              @ addr of preload start
 247        adr     r8, pend                @ addr of preload end
 248        mcrr    p15, 1, r8, r4, c12     @ preload into icache
 249pbegin:
 250        /* move into fast relock bypass */
 251        ldr     r8, omap243x_ssp_pll_ctl        @ get addr
 252        ldr     r5, [r8]                @ get val
 253        mvn     r6, #0x3                @ clear mask
 254        and     r5, r5, r6              @ clear field
 255        orr     r7, r5, #0x2            @ fast relock val
 256        str     r7, [r8]                @ go to fast relock
 257        ldr     r4, omap243x_ssp_pll_stat       @ addr of stat
 258block:
 259        /* wait for bypass */
 260        ldr     r8, [r4]                @ stat value
 261        and     r8, r8, #0x3            @ mask for stat
 262        cmp     r8, #0x1                @ there yet
 263        bne     block                   @ loop if not
 264
 265        /* set new dpll dividers _after_ in bypass */
 266        ldr     r4, omap243x_ssp_pll_div        @ get addr
 267        str     r0, [r4]                @ set dpll ctrl val
 268
 269        ldr     r4, omap243x_ssp_set_config     @ get addr
 270        mov     r8, #1                  @ valid cfg msk
 271        str     r8, [r4]                @ make dividers take
 272
 273        mov     r4, #100                @ dead spin a bit
 274wait_a_bit:
 275        subs    r4, r4, #1              @ dec loop
 276        bne     wait_a_bit              @ delay done?
 277
 278        /* check if staying in bypass */
 279        cmp     r2, #0x1                @ stay in bypass?
 280        beq     pend                    @ jump over dpll relock
 281
 282        /* relock DPLL with new vals */
 283        ldr     r5, omap243x_ssp_pll_stat       @ get addr
 284        ldr     r4, omap243x_ssp_pll_ctl        @ get addr
 285        orr     r8, r7, #0x3            @ val for lock dpll
 286        str     r8, [r4]                @ set val
 287        mov     r0, #1000               @ dead spin a bit
 288wait_more:
 289        subs    r0, r0, #1              @ dec loop
 290        bne     wait_more               @ delay done?
 291wait_lock:
 292        ldr     r8, [r5]                @ get lock val
 293        and     r8, r8, #3              @ isolate field
 294        cmp     r8, #2                  @ locked?
 295        bne     wait_lock               @ wait if not
 296pend:
 297        /* update memory timings & briefly lock dll */
 298        ldr     r4, omap243x_ssp_sdrc_rfr       @ get addr
 299        str     r1, [r4]                @ update refresh timing
 300        ldr     r11, omap243x_ssp_dlla_ctrl     @ get addr of DLLA ctrl
 301        ldr     r10, [r11]              @ get current val
 302        mvn     r9, #0x4                @ mask to get clear bit2
 303        and     r10, r10, r9            @ clear bit2 for lock mode
 304        orr     r10, r10, #0x8          @ make sure DLL on (es2 bit pos)
 305        str     r10, [r11]              @ commit to DLLA_CTRL
 306        add     r11, r11, #0x8          @ move to dllb
 307        str     r10, [r11]              @ hit DLLB also
 308
 309        mov     r4, #0x800              @ relock time (min 0x400 L3 clocks)
 310wait_dll_lock:
 311        subs    r4, r4, #0x1
 312        bne     wait_dll_lock
 313        nop
 314        ldmfd   sp!, {r0-r12, pc}       @ restore regs and return
 315
 316omap243x_ssp_set_config:
 317        .word OMAP2430_PRCM_CLKCFG_CTRL
 318omap243x_ssp_pll_ctl:
 319        .word OMAP2430_CM_REGADDR(PLL_MOD, CM_CLKEN)
 320omap243x_ssp_pll_stat:
 321        .word OMAP2430_CM_REGADDR(PLL_MOD, CM_IDLEST)
 322omap243x_ssp_pll_div:
 323        .word OMAP2430_CM_REGADDR(PLL_MOD, CM_CLKSEL1)
 324omap243x_ssp_sdrc_rfr:
 325        .word OMAP243X_SDRC_REGADDR(SDRC_RFR_CTRL_0)
 326omap243x_ssp_dlla_ctrl:
 327        .word OMAP243X_SDRC_REGADDR(SDRC_DLLA_CTRL)
 328
 329ENTRY(omap243x_sram_set_prcm_sz)
 330        .word   . - omap243x_sram_set_prcm
 331