linux/drivers/media/dvb/b2c2/flexcop-usb.c
<<
>>
Prefs
   1/*
   2 * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
   3 * flexcop-usb.c - covers the USB part
   4 * see flexcop.c for copyright information
   5 */
   6#define FC_LOG_PREFIX "flexcop_usb"
   7#include "flexcop-usb.h"
   8#include "flexcop-common.h"
   9
  10/* Version information */
  11#define DRIVER_VERSION "0.1"
  12#define DRIVER_NAME "Technisat/B2C2 FlexCop II/IIb/III Digital TV USB Driver"
  13#define DRIVER_AUTHOR "Patrick Boettcher <patrick.boettcher@desy.de>"
  14
  15/* debug */
  16#ifdef CONFIG_DVB_B2C2_FLEXCOP_DEBUG
  17#define dprintk(level,args...) \
  18        do { if ((debug & level)) printk(args); } while (0)
  19
  20#define debug_dump(b, l, method) do {\
  21        int i; \
  22        for (i = 0; i < l; i++) \
  23                method("%02x ", b[i]); \
  24        method("\n"); \
  25} while (0)
  26
  27#define DEBSTATUS ""
  28#else
  29#define dprintk(level, args...)
  30#define debug_dump(b, l, method)
  31#define DEBSTATUS " (debugging is not enabled)"
  32#endif
  33
  34static int debug;
  35module_param(debug, int, 0644);
  36MODULE_PARM_DESC(debug, "set debugging level (1=info,ts=2,"
  37                "ctrl=4,i2c=8,v8mem=16 (or-able))." DEBSTATUS);
  38#undef DEBSTATUS
  39
  40#define deb_info(args...) dprintk(0x01, args)
  41#define deb_ts(args...) dprintk(0x02, args)
  42#define deb_ctrl(args...) dprintk(0x04, args)
  43#define deb_i2c(args...) dprintk(0x08, args)
  44#define deb_v8(args...) dprintk(0x10, args)
  45
  46/* JLP 111700: we will include the 1 bit gap between the upper and lower 3 bits
  47 * in the IBI address, to make the V8 code simpler.
  48 * PCI ADDRESS FORMAT: 0x71C -> 0000 0111 0001 1100 (the six bits used)
  49 *                  in general: 0000 0HHH 000L LL00
  50 * IBI ADDRESS FORMAT:                    RHHH BLLL
  51 *
  52 * where R is the read(1)/write(0) bit, B is the busy bit
  53 * and HHH and LLL are the two sets of three bits from the PCI address.
  54 */
  55#define B2C2_FLEX_PCIOFFSET_TO_INTERNALADDR(usPCI) (u8) \
  56        (((usPCI >> 2) & 0x07) + ((usPCI >> 4) & 0x70))
  57#define B2C2_FLEX_INTERNALADDR_TO_PCIOFFSET(ucAddr) (u16) \
  58        (((ucAddr & 0x07) << 2) + ((ucAddr & 0x70) << 4))
  59
  60/*
  61 * DKT 020228
  62 * - forget about this VENDOR_BUFFER_SIZE, read and write register
  63 *   deal with DWORD or 4 bytes, that should be should from now on
  64 * - from now on, we don't support anything older than firm 1.00
  65 *   I eliminated the write register as a 2 trip of writing hi word and lo word
  66 *   and force this to write only 4 bytes at a time.
  67 *   NOTE: this should work with all the firmware from 1.00 and newer
  68 */
  69static int flexcop_usb_readwrite_dw(struct flexcop_device *fc, u16 wRegOffsPCI, u32 *val, u8 read)
  70{
  71        struct flexcop_usb *fc_usb = fc->bus_specific;
  72        u8 request = read ? B2C2_USB_READ_REG : B2C2_USB_WRITE_REG;
  73        u8 request_type = (read ? USB_DIR_IN : USB_DIR_OUT) | USB_TYPE_VENDOR;
  74        u8 wAddress = B2C2_FLEX_PCIOFFSET_TO_INTERNALADDR(wRegOffsPCI) |
  75                (read ? 0x80 : 0);
  76
  77        int len = usb_control_msg(fc_usb->udev,
  78                        read ? B2C2_USB_CTRL_PIPE_IN : B2C2_USB_CTRL_PIPE_OUT,
  79                        request,
  80                        request_type, /* 0xc0 read or 0x40 write */
  81                        wAddress,
  82                        0,
  83                        val,
  84                        sizeof(u32),
  85                        B2C2_WAIT_FOR_OPERATION_RDW * HZ);
  86
  87        if (len != sizeof(u32)) {
  88                err("error while %s dword from %d (%d).", read ? "reading" :
  89                                "writing", wAddress, wRegOffsPCI);
  90                return -EIO;
  91        }
  92        return 0;
  93}
  94/*
  95 * DKT 010817 - add support for V8 memory read/write and flash update
  96 */
  97static int flexcop_usb_v8_memory_req(struct flexcop_usb *fc_usb,
  98                flexcop_usb_request_t req, u8 page, u16 wAddress,
  99                u8 *pbBuffer, u32 buflen)
 100{
 101        u8 request_type = USB_TYPE_VENDOR;
 102        u16 wIndex;
 103        int nWaitTime, pipe, len;
 104        wIndex = page << 8;
 105
 106        switch (req) {
 107        case B2C2_USB_READ_V8_MEM:
 108                nWaitTime = B2C2_WAIT_FOR_OPERATION_V8READ;
 109                request_type |= USB_DIR_IN;
 110                pipe = B2C2_USB_CTRL_PIPE_IN;
 111                break;
 112        case B2C2_USB_WRITE_V8_MEM:
 113                wIndex |= pbBuffer[0];
 114                request_type |= USB_DIR_OUT;
 115                nWaitTime = B2C2_WAIT_FOR_OPERATION_V8WRITE;
 116                pipe = B2C2_USB_CTRL_PIPE_OUT;
 117                break;
 118        case B2C2_USB_FLASH_BLOCK:
 119                request_type |= USB_DIR_OUT;
 120                nWaitTime = B2C2_WAIT_FOR_OPERATION_V8FLASH;
 121                pipe = B2C2_USB_CTRL_PIPE_OUT;
 122                break;
 123        default:
 124                deb_info("unsupported request for v8_mem_req %x.\n", req);
 125                return -EINVAL;
 126        }
 127        deb_v8("v8mem: %02x %02x %04x %04x, len: %d\n", request_type, req,
 128                        wAddress, wIndex, buflen);
 129
 130        len = usb_control_msg(fc_usb->udev, pipe,
 131                        req,
 132                        request_type,
 133                        wAddress,
 134                        wIndex,
 135                        pbBuffer,
 136                        buflen,
 137                        nWaitTime * HZ);
 138
 139        debug_dump(pbBuffer, len, deb_v8);
 140        return len == buflen ? 0 : -EIO;
 141}
 142
 143#define bytes_left_to_read_on_page(paddr,buflen) \
 144        ((V8_MEMORY_PAGE_SIZE - (paddr & V8_MEMORY_PAGE_MASK)) > buflen \
 145         ? buflen : (V8_MEMORY_PAGE_SIZE - (paddr & V8_MEMORY_PAGE_MASK)))
 146
 147static int flexcop_usb_memory_req(struct flexcop_usb *fc_usb,
 148                flexcop_usb_request_t req, flexcop_usb_mem_page_t page_start,
 149                u32 addr, int extended, u8 *buf, u32 len)
 150{
 151        int i,ret = 0;
 152        u16 wMax;
 153        u32 pagechunk = 0;
 154
 155        switch(req) {
 156        case B2C2_USB_READ_V8_MEM:
 157                wMax = USB_MEM_READ_MAX;
 158                break;
 159        case B2C2_USB_WRITE_V8_MEM:
 160                wMax = USB_MEM_WRITE_MAX;
 161                break;
 162        case B2C2_USB_FLASH_BLOCK:
 163                wMax = USB_FLASH_MAX;
 164                break;
 165        default:
 166                return -EINVAL;
 167                break;
 168        }
 169        for (i = 0; i < len;) {
 170                pagechunk =
 171                        wMax < bytes_left_to_read_on_page(addr, len) ?
 172                                wMax :
 173                                bytes_left_to_read_on_page(addr, len);
 174                deb_info("%x\n",
 175                        (addr & V8_MEMORY_PAGE_MASK) |
 176                                (V8_MEMORY_EXTENDED*extended));
 177
 178                ret = flexcop_usb_v8_memory_req(fc_usb, req,
 179                        page_start + (addr / V8_MEMORY_PAGE_SIZE),
 180                        (addr & V8_MEMORY_PAGE_MASK) |
 181                                (V8_MEMORY_EXTENDED*extended),
 182                        &buf[i], pagechunk);
 183
 184                if (ret < 0)
 185                        return ret;
 186                addr += pagechunk;
 187                len -= pagechunk;
 188        }
 189        return 0;
 190}
 191
 192static int flexcop_usb_get_mac_addr(struct flexcop_device *fc, int extended)
 193{
 194        return flexcop_usb_memory_req(fc->bus_specific, B2C2_USB_READ_V8_MEM,
 195                V8_MEMORY_PAGE_FLASH, 0x1f010, 1,
 196                fc->dvb_adapter.proposed_mac, 6);
 197}
 198
 199#if 0
 200static int flexcop_usb_utility_req(struct flexcop_usb *fc_usb, int set,
 201                flexcop_usb_utility_function_t func, u8 extra, u16 wIndex,
 202                u16 buflen, u8 *pvBuffer)
 203{
 204        u16 wValue;
 205        u8 request_type = (set ? USB_DIR_OUT : USB_DIR_IN) | USB_TYPE_VENDOR;
 206        int nWaitTime = 2,
 207            pipe = set ? B2C2_USB_CTRL_PIPE_OUT : B2C2_USB_CTRL_PIPE_IN, len;
 208        wValue = (func << 8) | extra;
 209
 210        len = usb_control_msg(fc_usb->udev,pipe,
 211                        B2C2_USB_UTILITY,
 212                        request_type,
 213                        wValue,
 214                        wIndex,
 215                        pvBuffer,
 216                        buflen,
 217                        nWaitTime * HZ);
 218        return len == buflen ? 0 : -EIO;
 219}
 220#endif
 221
 222/* usb i2c stuff */
 223static int flexcop_usb_i2c_req(struct flexcop_i2c_adapter *i2c,
 224                flexcop_usb_request_t req, flexcop_usb_i2c_function_t func,
 225                u8 chipaddr, u8 addr, u8 *buf, u8 buflen)
 226{
 227        struct flexcop_usb *fc_usb = i2c->fc->bus_specific;
 228        u16 wValue, wIndex;
 229        int nWaitTime,pipe,len;
 230        u8 request_type = USB_TYPE_VENDOR;
 231
 232        switch (func) {
 233        case USB_FUNC_I2C_WRITE:
 234        case USB_FUNC_I2C_MULTIWRITE:
 235        case USB_FUNC_I2C_REPEATWRITE:
 236                /* DKT 020208 - add this to support special case of DiSEqC */
 237        case USB_FUNC_I2C_CHECKWRITE:
 238                pipe = B2C2_USB_CTRL_PIPE_OUT;
 239                nWaitTime = 2;
 240                request_type |= USB_DIR_OUT;
 241                break;
 242        case USB_FUNC_I2C_READ:
 243        case USB_FUNC_I2C_REPEATREAD:
 244                pipe = B2C2_USB_CTRL_PIPE_IN;
 245                nWaitTime = 2;
 246                request_type |= USB_DIR_IN;
 247                break;
 248        default:
 249                deb_info("unsupported function for i2c_req %x\n", func);
 250                return -EINVAL;
 251        }
 252        wValue = (func << 8) | (i2c->port << 4);
 253        wIndex = (chipaddr << 8 ) | addr;
 254
 255        deb_i2c("i2c %2d: %02x %02x %02x %02x %02x %02x\n",
 256                        func, request_type, req,
 257                        wValue & 0xff, wValue >> 8,
 258                        wIndex & 0xff, wIndex >> 8);
 259
 260        len = usb_control_msg(fc_usb->udev,pipe,
 261                        req,
 262                        request_type,
 263                        wValue,
 264                        wIndex,
 265                        buf,
 266                        buflen,
 267                        nWaitTime * HZ);
 268        return len == buflen ? 0 : -EREMOTEIO;
 269}
 270
 271/* actual bus specific access functions,
 272   make sure prototype are/will be equal to pci */
 273static flexcop_ibi_value flexcop_usb_read_ibi_reg(struct flexcop_device *fc,
 274        flexcop_ibi_register reg)
 275{
 276        flexcop_ibi_value val;
 277        val.raw = 0;
 278        flexcop_usb_readwrite_dw(fc, reg, &val.raw, 1);
 279        return val;
 280}
 281
 282static int flexcop_usb_write_ibi_reg(struct flexcop_device *fc,
 283                flexcop_ibi_register reg, flexcop_ibi_value val)
 284{
 285        return flexcop_usb_readwrite_dw(fc, reg, &val.raw, 0);
 286}
 287
 288static int flexcop_usb_i2c_request(struct flexcop_i2c_adapter *i2c,
 289                flexcop_access_op_t op, u8 chipaddr, u8 addr, u8 *buf, u16 len)
 290{
 291        if (op == FC_READ)
 292                return flexcop_usb_i2c_req(i2c, B2C2_USB_I2C_REQUEST,
 293                                USB_FUNC_I2C_READ, chipaddr, addr, buf, len);
 294        else
 295                return flexcop_usb_i2c_req(i2c, B2C2_USB_I2C_REQUEST,
 296                                USB_FUNC_I2C_WRITE, chipaddr, addr, buf, len);
 297}
 298
 299static void flexcop_usb_process_frame(struct flexcop_usb *fc_usb,
 300        u8 *buffer, int buffer_length)
 301{
 302        u8 *b;
 303        int l;
 304
 305        deb_ts("tmp_buffer_length=%d, buffer_length=%d\n",
 306                fc_usb->tmp_buffer_length, buffer_length);
 307
 308        if (fc_usb->tmp_buffer_length > 0) {
 309                memcpy(fc_usb->tmp_buffer+fc_usb->tmp_buffer_length, buffer,
 310                                buffer_length);
 311                fc_usb->tmp_buffer_length += buffer_length;
 312                b = fc_usb->tmp_buffer;
 313                l = fc_usb->tmp_buffer_length;
 314        } else {
 315                b=buffer;
 316                l=buffer_length;
 317        }
 318
 319        while (l >= 190) {
 320                if (*b == 0xff) {
 321                        switch (*(b+1) & 0x03) {
 322                        case 0x01: /* media packet */
 323                                if (*(b+2) == 0x47)
 324                                        flexcop_pass_dmx_packets(
 325                                                        fc_usb->fc_dev, b+2, 1);
 326                                else
 327                                        deb_ts(
 328                                        "not ts packet %02x %02x %02x %02x \n",
 329                                                *(b+2), *(b+3),
 330                                                *(b+4), *(b+5));
 331                                b += 190;
 332                                l -= 190;
 333                                break;
 334                        default:
 335                                deb_ts("wrong packet type\n");
 336                                l = 0;
 337                                break;
 338                        }
 339                } else {
 340                        deb_ts("wrong header\n");
 341                        l = 0;
 342                }
 343        }
 344
 345        if (l>0)
 346                memcpy(fc_usb->tmp_buffer, b, l);
 347        fc_usb->tmp_buffer_length = l;
 348}
 349
 350static void flexcop_usb_urb_complete(struct urb *urb)
 351{
 352        struct flexcop_usb *fc_usb = urb->context;
 353        int i;
 354
 355        if (urb->actual_length > 0)
 356                deb_ts("urb completed, bufsize: %d actlen; %d\n",
 357                        urb->transfer_buffer_length, urb->actual_length);
 358
 359        for (i = 0; i < urb->number_of_packets; i++) {
 360                if (urb->iso_frame_desc[i].status < 0) {
 361                        err("iso frame descriptor %d has an error: %d\n", i,
 362                                urb->iso_frame_desc[i].status);
 363                } else
 364                        if (urb->iso_frame_desc[i].actual_length > 0) {
 365                                deb_ts("passed %d bytes to the demux\n",
 366                                        urb->iso_frame_desc[i].actual_length);
 367
 368                                flexcop_usb_process_frame(fc_usb,
 369                                        urb->transfer_buffer +
 370                                                urb->iso_frame_desc[i].offset,
 371                                        urb->iso_frame_desc[i].actual_length);
 372                        }
 373                urb->iso_frame_desc[i].status = 0;
 374                urb->iso_frame_desc[i].actual_length = 0;
 375        }
 376        usb_submit_urb(urb,GFP_ATOMIC);
 377}
 378
 379static int flexcop_usb_stream_control(struct flexcop_device *fc, int onoff)
 380{
 381        /* submit/kill iso packets */
 382        return 0;
 383}
 384
 385static void flexcop_usb_transfer_exit(struct flexcop_usb *fc_usb)
 386{
 387        int i;
 388        for (i = 0; i < B2C2_USB_NUM_ISO_URB; i++)
 389                if (fc_usb->iso_urb[i] != NULL) {
 390                        deb_ts("unlinking/killing urb no. %d\n",i);
 391                        usb_kill_urb(fc_usb->iso_urb[i]);
 392                        usb_free_urb(fc_usb->iso_urb[i]);
 393                }
 394
 395        if (fc_usb->iso_buffer != NULL)
 396                pci_free_consistent(NULL,
 397                        fc_usb->buffer_size, fc_usb->iso_buffer,
 398                        fc_usb->dma_addr);
 399}
 400
 401static int flexcop_usb_transfer_init(struct flexcop_usb *fc_usb)
 402{
 403        u16 frame_size = le16_to_cpu(
 404                fc_usb->uintf->cur_altsetting->endpoint[0].desc.wMaxPacketSize);
 405        int bufsize = B2C2_USB_NUM_ISO_URB * B2C2_USB_FRAMES_PER_ISO *
 406                frame_size, i, j, ret;
 407        int buffer_offset = 0;
 408
 409        deb_ts("creating %d iso-urbs with %d frames "
 410                        "each of %d bytes size = %d.\n", B2C2_USB_NUM_ISO_URB,
 411                        B2C2_USB_FRAMES_PER_ISO, frame_size, bufsize);
 412
 413        fc_usb->iso_buffer = pci_alloc_consistent(NULL,
 414                        bufsize, &fc_usb->dma_addr);
 415        if (fc_usb->iso_buffer == NULL)
 416                return -ENOMEM;
 417
 418        memset(fc_usb->iso_buffer, 0, bufsize);
 419        fc_usb->buffer_size = bufsize;
 420
 421        /* creating iso urbs */
 422        for (i = 0; i < B2C2_USB_NUM_ISO_URB; i++) {
 423                fc_usb->iso_urb[i] = usb_alloc_urb(B2C2_USB_FRAMES_PER_ISO,
 424                        GFP_ATOMIC);
 425                if (fc_usb->iso_urb[i] == NULL) {
 426                        ret = -ENOMEM;
 427                        goto urb_error;
 428                }
 429        }
 430
 431        /* initialising and submitting iso urbs */
 432        for (i = 0; i < B2C2_USB_NUM_ISO_URB; i++) {
 433                int frame_offset = 0;
 434                struct urb *urb = fc_usb->iso_urb[i];
 435                deb_ts("initializing and submitting urb no. %d "
 436                        "(buf_offset: %d).\n", i, buffer_offset);
 437
 438                urb->dev = fc_usb->udev;
 439                urb->context = fc_usb;
 440                urb->complete = flexcop_usb_urb_complete;
 441                urb->pipe = B2C2_USB_DATA_PIPE;
 442                urb->transfer_flags = URB_ISO_ASAP;
 443                urb->interval = 1;
 444                urb->number_of_packets = B2C2_USB_FRAMES_PER_ISO;
 445                urb->transfer_buffer_length = frame_size * B2C2_USB_FRAMES_PER_ISO;
 446                urb->transfer_buffer = fc_usb->iso_buffer + buffer_offset;
 447
 448                buffer_offset += frame_size * B2C2_USB_FRAMES_PER_ISO;
 449                for (j = 0; j < B2C2_USB_FRAMES_PER_ISO; j++) {
 450                        deb_ts("urb no: %d, frame: %d, frame_offset: %d\n",
 451                                        i, j, frame_offset);
 452                        urb->iso_frame_desc[j].offset = frame_offset;
 453                        urb->iso_frame_desc[j].length = frame_size;
 454                        frame_offset += frame_size;
 455                }
 456
 457                if ((ret = usb_submit_urb(fc_usb->iso_urb[i],GFP_ATOMIC))) {
 458                        err("submitting urb %d failed with %d.", i, ret);
 459                        goto urb_error;
 460                }
 461                deb_ts("submitted urb no. %d.\n",i);
 462        }
 463
 464        /* SRAM */
 465        flexcop_sram_set_dest(fc_usb->fc_dev, FC_SRAM_DEST_MEDIA |
 466                        FC_SRAM_DEST_NET | FC_SRAM_DEST_CAO | FC_SRAM_DEST_CAI,
 467                        FC_SRAM_DEST_TARGET_WAN_USB);
 468        flexcop_wan_set_speed(fc_usb->fc_dev, FC_WAN_SPEED_8MBITS);
 469        flexcop_sram_ctrl(fc_usb->fc_dev, 1, 1, 1);
 470        return 0;
 471
 472urb_error:
 473        flexcop_usb_transfer_exit(fc_usb);
 474        return ret;
 475}
 476
 477static int flexcop_usb_init(struct flexcop_usb *fc_usb)
 478{
 479        /* use the alternate setting with the larges buffer */
 480        usb_set_interface(fc_usb->udev,0,1);
 481        switch (fc_usb->udev->speed) {
 482        case USB_SPEED_LOW:
 483                err("cannot handle USB speed because it is too slow.");
 484                return -ENODEV;
 485                break;
 486        case USB_SPEED_FULL:
 487                info("running at FULL speed.");
 488                break;
 489        case USB_SPEED_HIGH:
 490                info("running at HIGH speed.");
 491                break;
 492        case USB_SPEED_UNKNOWN: /* fall through */
 493        default:
 494                err("cannot handle USB speed because it is unknown.");
 495                return -ENODEV;
 496        }
 497        usb_set_intfdata(fc_usb->uintf, fc_usb);
 498        return 0;
 499}
 500
 501static void flexcop_usb_exit(struct flexcop_usb *fc_usb)
 502{
 503        usb_set_intfdata(fc_usb->uintf, NULL);
 504}
 505
 506static int flexcop_usb_probe(struct usb_interface *intf,
 507                const struct usb_device_id *id)
 508{
 509        struct usb_device *udev = interface_to_usbdev(intf);
 510        struct flexcop_usb *fc_usb = NULL;
 511        struct flexcop_device *fc = NULL;
 512        int ret;
 513
 514        if ((fc = flexcop_device_kmalloc(sizeof(struct flexcop_usb))) == NULL) {
 515                err("out of memory\n");
 516                return -ENOMEM;
 517        }
 518
 519        /* general flexcop init */
 520        fc_usb = fc->bus_specific;
 521        fc_usb->fc_dev = fc;
 522
 523        fc->read_ibi_reg  = flexcop_usb_read_ibi_reg;
 524        fc->write_ibi_reg = flexcop_usb_write_ibi_reg;
 525        fc->i2c_request = flexcop_usb_i2c_request;
 526        fc->get_mac_addr = flexcop_usb_get_mac_addr;
 527
 528        fc->stream_control = flexcop_usb_stream_control;
 529
 530        fc->pid_filtering = 1;
 531        fc->bus_type = FC_USB;
 532
 533        fc->dev = &udev->dev;
 534        fc->owner = THIS_MODULE;
 535
 536        /* bus specific part */
 537        fc_usb->udev = udev;
 538        fc_usb->uintf = intf;
 539        if ((ret = flexcop_usb_init(fc_usb)) != 0)
 540                goto err_kfree;
 541
 542        /* init flexcop */
 543        if ((ret = flexcop_device_initialize(fc)) != 0)
 544                goto err_usb_exit;
 545
 546        /* xfer init */
 547        if ((ret = flexcop_usb_transfer_init(fc_usb)) != 0)
 548                goto err_fc_exit;
 549
 550        info("%s successfully initialized and connected.", DRIVER_NAME);
 551        return 0;
 552
 553err_fc_exit:
 554        flexcop_device_exit(fc);
 555err_usb_exit:
 556        flexcop_usb_exit(fc_usb);
 557err_kfree:
 558        flexcop_device_kfree(fc);
 559        return ret;
 560}
 561
 562static void flexcop_usb_disconnect(struct usb_interface *intf)
 563{
 564        struct flexcop_usb *fc_usb = usb_get_intfdata(intf);
 565        flexcop_usb_transfer_exit(fc_usb);
 566        flexcop_device_exit(fc_usb->fc_dev);
 567        flexcop_usb_exit(fc_usb);
 568        flexcop_device_kfree(fc_usb->fc_dev);
 569        info("%s successfully deinitialized and disconnected.", DRIVER_NAME);
 570}
 571
 572static struct usb_device_id flexcop_usb_table [] = {
 573        { USB_DEVICE(0x0af7, 0x0101) },
 574        { }
 575};
 576MODULE_DEVICE_TABLE (usb, flexcop_usb_table);
 577
 578/* usb specific object needed to register this driver with the usb subsystem */
 579static struct usb_driver flexcop_usb_driver = {
 580        .name           = "b2c2_flexcop_usb",
 581        .probe          = flexcop_usb_probe,
 582        .disconnect = flexcop_usb_disconnect,
 583        .id_table       = flexcop_usb_table,
 584};
 585
 586module_usb_driver(flexcop_usb_driver);
 587
 588MODULE_AUTHOR(DRIVER_AUTHOR);
 589MODULE_DESCRIPTION(DRIVER_NAME);
 590MODULE_LICENSE("GPL");
 591