linux/drivers/staging/rtl8712/usb_halinit.c
<<
>>
Prefs 
   1/******************************************************************************
   2 * usb_halinit.c
   3 *
   4 * Copyright(c) 2007 - 2010 Realtek Corporation. All rights reserved.
   5 * Linux device driver for RTL8192SU
   6 *
   7 * This program is free software; you can redistribute it and/or modify it
   8 * under the terms of version 2 of the GNU General Public License as
   9 * published by the Free Software Foundation.
  10 *
  11 * This program is distributed in the hope that it will be useful, but WITHOUT
  12 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  13 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  14 * more details.
  15 *
  16 * You should have received a copy of the GNU General Public License along with
  17 * this program; if not, write to the Free Software Foundation, Inc.,
  18 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
  19 *
  20 * Modifications for inclusion into the Linux staging tree are
  21 * Copyright(c) 2010 Larry Finger. All rights reserved.
  22 *
  23 * Contact information:
  24 * WLAN FAE <wlanfae@realtek.com>
  25 * Larry Finger <Larry.Finger@lwfinger.net>
  26 *
  27 ******************************************************************************/
  28
  29#define _HCI_HAL_INIT_C_
  30
  31#include "osdep_service.h"
  32#include "drv_types.h"
  33#include "usb_ops.h"
  34#include "usb_osintf.h"
  35
  36u8 r8712_usb_hal_bus_init(struct _adapter *padapter)
  37{
  38        u8 val8 = 0;
  39        u8 ret = _SUCCESS;
  40        int PollingCnt = 20;
  41        struct registry_priv *pregistrypriv = &padapter->registrypriv;
  42
  43        if (pregistrypriv->chip_version == RTL8712_FPGA) {
  44                val8 = 0x01;
  45                /* switch to 80M clock */
  46                r8712_write8(padapter, SYS_CLKR, val8);
  47                val8 = r8712_read8(padapter, SPS1_CTRL);
  48                val8 = val8 | 0x01;
  49                /* enable VSPS12 LDO Macro block */
  50                r8712_write8(padapter, SPS1_CTRL, val8);
  51                val8 = r8712_read8(padapter, AFE_MISC);
  52                val8 = val8 | 0x01;
  53                /* Enable AFE Macro Block's Bandgap */
  54                r8712_write8(padapter, AFE_MISC, val8);
  55                val8 = r8712_read8(padapter, LDOA15_CTRL);
  56                val8 = val8 | 0x01;
  57                /* enable LDOA15 block */
  58                r8712_write8(padapter, LDOA15_CTRL, val8);
  59                val8 = r8712_read8(padapter, SPS1_CTRL);
  60                val8 = val8 | 0x02;
  61                /* Enable VSPS12_SW Macro Block */
  62                r8712_write8(padapter, SPS1_CTRL, val8);
  63                val8 = r8712_read8(padapter, AFE_MISC);
  64                val8 = val8 | 0x02;
  65                /* Enable AFE Macro Block's Mbias */
  66                r8712_write8(padapter, AFE_MISC, val8);
  67                val8 = r8712_read8(padapter, SYS_ISO_CTRL + 1);
  68                val8 = val8 | 0x08;
  69                /* isolate PCIe Analog 1.2V to PCIe 3.3V and PCIE Digital */
  70                r8712_write8(padapter, SYS_ISO_CTRL + 1, val8);
  71                val8 = r8712_read8(padapter, SYS_ISO_CTRL + 1);
  72                val8 = val8 & 0xEF;
  73                /* attatch AFE PLL to MACTOP/BB/PCIe Digital */
  74                r8712_write8(padapter, SYS_ISO_CTRL + 1, val8);
  75                val8 = r8712_read8(padapter, AFE_XTAL_CTRL + 1);
  76                val8 = val8 & 0xFB;
  77                /* enable AFE clock */
  78                r8712_write8(padapter, AFE_XTAL_CTRL + 1, val8);
  79                val8 = r8712_read8(padapter, AFE_PLL_CTRL);
  80                val8 = val8 | 0x01;
  81                /* Enable AFE PLL Macro Block */
  82                r8712_write8(padapter, AFE_PLL_CTRL, val8);
  83                val8 = 0xEE;
  84                /* release isolation AFE PLL & MD */
  85                r8712_write8(padapter, SYS_ISO_CTRL, val8);
  86                val8 = r8712_read8(padapter, SYS_CLKR + 1);
  87                val8 = val8 | 0x08;
  88                /* enable MAC clock */
  89                r8712_write8(padapter, SYS_CLKR + 1, val8);
  90                val8 = r8712_read8(padapter, SYS_FUNC_EN + 1);
  91                val8 = val8 | 0x08;
  92                /* enable Core digital and enable IOREG R/W */
  93                r8712_write8(padapter, SYS_FUNC_EN + 1, val8);
  94                val8 = val8 | 0x80;
  95                /* enable REG_EN */
  96                r8712_write8(padapter, SYS_FUNC_EN + 1, val8);
  97                val8 = r8712_read8(padapter, SYS_CLKR + 1);
  98                val8 = (val8 | 0x80) & 0xBF;
  99                /* switch the control path */
 100                r8712_write8(padapter, SYS_CLKR + 1, val8);
 101                val8 = 0xFC;
 102                r8712_write8(padapter, CR, val8);
 103                val8 = 0x37;
 104                r8712_write8(padapter, CR + 1, val8);
 105                /* reduce EndPoint & init it */
 106                r8712_write8(padapter, 0x102500ab, r8712_read8(padapter,
 107                             0x102500ab) | BIT(6) | BIT(7));
 108                /* consideration of power consumption - init */
 109                r8712_write8(padapter, 0x10250008, r8712_read8(padapter,
 110                             0x10250008) & 0xfffffffb);
 111        } else if (pregistrypriv->chip_version == RTL8712_1stCUT) {
 112                /* Initialization for power on sequence, */
 113                r8712_write8(padapter, SPS0_CTRL + 1, 0x53);
 114                r8712_write8(padapter, SPS0_CTRL, 0x57);
 115                /* Enable AFE Macro Block's Bandgap and Enable AFE Macro
 116                 * Block's Mbias
 117                 */
 118                val8 = r8712_read8(padapter, AFE_MISC);
 119                r8712_write8(padapter, AFE_MISC, (val8 | AFE_MISC_BGEN |
 120                             AFE_MISC_MBEN));
 121                /* Enable LDOA15 block */
 122                val8 = r8712_read8(padapter, LDOA15_CTRL);
 123                r8712_write8(padapter, LDOA15_CTRL, (val8 | LDA15_EN));
 124                val8 = r8712_read8(padapter, SPS1_CTRL);
 125                r8712_write8(padapter, SPS1_CTRL, (val8 | SPS1_LDEN));
 126                msleep(20);
 127                /* Enable Switch Regulator Block */
 128                val8 = r8712_read8(padapter, SPS1_CTRL);
 129                r8712_write8(padapter, SPS1_CTRL, (val8 | SPS1_SWEN));
 130                r8712_write32(padapter, SPS1_CTRL, 0x00a7b267);
 131                val8 = r8712_read8(padapter, SYS_ISO_CTRL + 1);
 132                r8712_write8(padapter, SYS_ISO_CTRL + 1, (val8 | 0x08));
 133                /* Engineer Packet CP test Enable */
 134                val8 = r8712_read8(padapter, SYS_FUNC_EN + 1);
 135                r8712_write8(padapter, SYS_FUNC_EN + 1, (val8 | 0x20));
 136                val8 = r8712_read8(padapter, SYS_ISO_CTRL + 1);
 137                r8712_write8(padapter, SYS_ISO_CTRL + 1, (val8 & 0x6F));
 138                /* Enable AFE clock */
 139                val8 = r8712_read8(padapter, AFE_XTAL_CTRL + 1);
 140                r8712_write8(padapter, AFE_XTAL_CTRL + 1, (val8 & 0xfb));
 141                /* Enable AFE PLL Macro Block */
 142                val8 = r8712_read8(padapter, AFE_PLL_CTRL);
 143                r8712_write8(padapter, AFE_PLL_CTRL, (val8 | 0x11));
 144                /* Attatch AFE PLL to MACTOP/BB/PCIe Digital */
 145                val8 = r8712_read8(padapter, SYS_ISO_CTRL);
 146                r8712_write8(padapter, SYS_ISO_CTRL, (val8 & 0xEE));
 147                /* Switch to 40M clock */
 148                val8 = r8712_read8(padapter, SYS_CLKR);
 149                r8712_write8(padapter, SYS_CLKR, val8 & (~SYS_CLKSEL));
 150                /* SSC Disable */
 151                val8 = r8712_read8(padapter, SYS_CLKR);
 152                /* Enable MAC clock */
 153                val8 = r8712_read8(padapter, SYS_CLKR + 1);
 154                r8712_write8(padapter, SYS_CLKR + 1, (val8 | 0x18));
 155                /* Revised POS, */
 156                r8712_write8(padapter, PMC_FSM, 0x02);
 157                /* Enable Core digital and enable IOREG R/W */
 158                val8 = r8712_read8(padapter, SYS_FUNC_EN + 1);
 159                r8712_write8(padapter, SYS_FUNC_EN + 1, (val8 | 0x08));
 160                /* Enable REG_EN */
 161                val8 = r8712_read8(padapter, SYS_FUNC_EN + 1);
 162                r8712_write8(padapter, SYS_FUNC_EN + 1, (val8 | 0x80));
 163                /* Switch the control path to FW */
 164                val8 = r8712_read8(padapter, SYS_CLKR + 1);
 165                r8712_write8(padapter, SYS_CLKR + 1, (val8 | 0x80) & 0xBF);
 166                r8712_write8(padapter, CR, 0xFC);
 167                r8712_write8(padapter, CR + 1, 0x37);
 168                /* Fix the RX FIFO issue(usb error), */
 169                val8 = r8712_read8(padapter, 0x1025FE5c);
 170                r8712_write8(padapter, 0x1025FE5c, (val8|BIT(7)));
 171                val8 = r8712_read8(padapter, 0x102500ab);
 172                r8712_write8(padapter, 0x102500ab, (val8|BIT(6)|BIT(7)));
 173                /* For power save, used this in the bit file after 970621 */
 174                val8 = r8712_read8(padapter, SYS_CLKR);
 175                r8712_write8(padapter, SYS_CLKR, val8&(~CPU_CLKSEL));
 176        } else if (pregistrypriv->chip_version == RTL8712_2ndCUT ||
 177                  pregistrypriv->chip_version == RTL8712_3rdCUT) {
 178                /* Initialization for power on sequence,
 179                 * E-Fuse leakage prevention sequence
 180                 */
 181                r8712_write8(padapter, 0x37, 0xb0);
 182                msleep(20);
 183                r8712_write8(padapter, 0x37, 0x30);
 184                /* Set control path switch to HW control and reset Digital Core,
 185                 * CPU Core and MAC I/O to solve FW download fail when system
 186                 * from resume sate.
 187                 */
 188                val8 = r8712_read8(padapter, SYS_CLKR + 1);
 189                if (val8 & 0x80) {
 190                        val8 &= 0x3f;
 191                        r8712_write8(padapter, SYS_CLKR + 1, val8);
 192                }
 193                val8 = r8712_read8(padapter, SYS_FUNC_EN + 1);
 194                val8 &= 0x73;
 195                r8712_write8(padapter, SYS_FUNC_EN + 1, val8);
 196                msleep(20);
 197                /* Revised POS, */
 198                /* Enable AFE Macro Block's Bandgap and Enable AFE Macro
 199                 * Block's Mbias */
 200                r8712_write8(padapter, SPS0_CTRL + 1, 0x53);
 201                r8712_write8(padapter, SPS0_CTRL, 0x57);
 202                val8 = r8712_read8(padapter, AFE_MISC);
 203                /*Bandgap*/
 204                r8712_write8(padapter, AFE_MISC, (val8 | AFE_MISC_BGEN));
 205                r8712_write8(padapter, AFE_MISC, (val8 | AFE_MISC_BGEN |
 206                             AFE_MISC_MBEN | AFE_MISC_I32_EN));
 207                /* Enable PLL Power (LDOA15V) */
 208                val8 = r8712_read8(padapter, LDOA15_CTRL);
 209                r8712_write8(padapter, LDOA15_CTRL, (val8 | LDA15_EN));
 210                /* Enable LDOV12D block */
 211                val8 = r8712_read8(padapter, LDOV12D_CTRL);
 212                r8712_write8(padapter, LDOV12D_CTRL, (val8 | LDV12_EN));
 213                val8 = r8712_read8(padapter, SYS_ISO_CTRL + 1);
 214                r8712_write8(padapter, SYS_ISO_CTRL + 1, (val8 | 0x08));
 215                /* Engineer Packet CP test Enable */
 216                val8 = r8712_read8(padapter, SYS_FUNC_EN + 1);
 217                r8712_write8(padapter, SYS_FUNC_EN + 1, (val8 | 0x20));
 218                /* Support 64k IMEM */
 219                val8 = r8712_read8(padapter, SYS_ISO_CTRL + 1);
 220                r8712_write8(padapter, SYS_ISO_CTRL + 1, (val8 & 0x68));
 221                /* Enable AFE clock */
 222                val8 = r8712_read8(padapter, AFE_XTAL_CTRL + 1);
 223                r8712_write8(padapter, AFE_XTAL_CTRL + 1, (val8 & 0xfb));
 224                /* Enable AFE PLL Macro Block */
 225                val8 = r8712_read8(padapter, AFE_PLL_CTRL);
 226                r8712_write8(padapter, AFE_PLL_CTRL, (val8 | 0x11));
 227                /* Some sample will download fw failure. The clock will be
 228                 * stable with 500 us delay after reset the PLL
 229                 * TODO: When usleep is added to kernel, change next 3
 230                 * udelay(500) to usleep(500)
 231                 */
 232                udelay(500);
 233                r8712_write8(padapter, AFE_PLL_CTRL, (val8 | 0x51));
 234                udelay(500);
 235                r8712_write8(padapter, AFE_PLL_CTRL, (val8 | 0x11));
 236                udelay(500);
 237                /* Attatch AFE PLL to MACTOP/BB/PCIe Digital */
 238                val8 = r8712_read8(padapter, SYS_ISO_CTRL);
 239                r8712_write8(padapter, SYS_ISO_CTRL, (val8 & 0xEE));
 240                /* Switch to 40M clock */
 241                r8712_write8(padapter, SYS_CLKR, 0x00);
 242                /* CPU Clock and 80M Clock SSC Disable to overcome FW download
 243                 * fail timing issue.
 244                 */
 245                val8 = r8712_read8(padapter, SYS_CLKR);
 246                r8712_write8(padapter, SYS_CLKR, (val8 | 0xa0));
 247                /* Enable MAC clock */
 248                val8 = r8712_read8(padapter, SYS_CLKR + 1);
 249                r8712_write8(padapter, SYS_CLKR + 1, (val8 | 0x18));
 250                /* Revised POS, */
 251                r8712_write8(padapter, PMC_FSM, 0x02);
 252                /* Enable Core digital and enable IOREG R/W */
 253                val8 = r8712_read8(padapter, SYS_FUNC_EN + 1);
 254                r8712_write8(padapter, SYS_FUNC_EN + 1, (val8 | 0x08));
 255                /* Enable REG_EN */
 256                val8 = r8712_read8(padapter, SYS_FUNC_EN + 1);
 257                r8712_write8(padapter, SYS_FUNC_EN + 1, (val8 | 0x80));
 258                /* Switch the control path to FW */
 259                val8 = r8712_read8(padapter, SYS_CLKR + 1);
 260                r8712_write8(padapter, SYS_CLKR + 1, (val8 | 0x80) & 0xBF);
 261                r8712_write8(padapter, CR, 0xFC);
 262                r8712_write8(padapter, CR + 1, 0x37);
 263                /* Fix the RX FIFO issue(usb error), 970410 */
 264                val8 = r8712_read8(padapter, 0x1025FE5c);
 265                r8712_write8(padapter, 0x1025FE5c, (val8 | BIT(7)));
 266                /* For power save, used this in the bit file after 970621 */
 267                val8 = r8712_read8(padapter, SYS_CLKR);
 268                r8712_write8(padapter, SYS_CLKR, val8 & (~CPU_CLKSEL));
 269                /* Revised for 8051 ROM code wrong operation. */
 270                r8712_write8(padapter, 0x1025fe1c, 0x80);
 271                /* To make sure that TxDMA can ready to download FW.
 272                 * We should reset TxDMA if IMEM RPT was not ready.
 273                 */
 274                do {
 275                        val8 = r8712_read8(padapter, TCR);
 276                        if ((val8 & _TXDMA_INIT_VALUE) == _TXDMA_INIT_VALUE)
 277                                break;
 278                        udelay(5); /* PlatformStallExecution(5); */
 279                } while (PollingCnt--); /* Delay 1ms */
 280
 281                if (PollingCnt <= 0) {
 282                        val8 = r8712_read8(padapter, CR);
 283                        r8712_write8(padapter, CR, val8&(~_TXDMA_EN));
 284                        udelay(2); /* PlatformStallExecution(2); */
 285                        /* Reset TxDMA */
 286                        r8712_write8(padapter, CR, val8|_TXDMA_EN);
 287                }
 288        } else
 289                ret = _FAIL;
 290        return ret;
 291}
 292
 293unsigned int r8712_usb_inirp_init(struct _adapter *padapter)
 294{
 295        u8 i;
 296        struct recv_buf *precvbuf;
 297        struct intf_hdl *pintfhdl = &padapter->pio_queue->intf;
 298        struct recv_priv *precvpriv = &(padapter->recvpriv);
 299
 300        precvpriv->ff_hwaddr = RTL8712_DMA_RX0FF; /* mapping rx fifo address */
 301        /* issue Rx irp to receive data */
 302        precvbuf = (struct recv_buf *)precvpriv->precv_buf;
 303        for (i = 0; i < NR_RECVBUFF; i++) {
 304                if (r8712_usb_read_port(pintfhdl, precvpriv->ff_hwaddr, 0,
 305                   (unsigned char *)precvbuf) == false)
 306                        return _FAIL;
 307                precvbuf++;
 308                precvpriv->free_recv_buf_queue_cnt--;
 309        }
 310        return _SUCCESS;
 311}
 312
 313unsigned int r8712_usb_inirp_deinit(struct _adapter *padapter)
 314{
 315        r8712_usb_read_port_cancel(padapter);
 316        return _SUCCESS;
 317}
 318
Hosted by Missing Link Electronics. The original LXR software by the LXR community, this experimental version by lxr@linux.no.