1
2
3
4
5
6#include <linux/delay.h>
7#include <linux/hdlc.h>
8#include <linux/i2c-gpio.h>
9#include <linux/io.h>
10#include <linux/irq.h>
11#include <linux/kernel.h>
12#include <linux/pci.h>
13#include <linux/serial_8250.h>
14#include <asm/mach-types.h>
15#include <asm/mach/arch.h>
16#include <asm/mach/flash.h>
17#include <asm/mach/pci.h>
18
19#define SLOT_ETHA 0x0B
20#define SLOT_ETHB 0x0C
21#define SLOT_MPCI 0x0D
22#define SLOT_NEC 0x0E
23
24
25#define GPIO_SCL 0
26#define GPIO_SDA 1
27#define GPIO_STR 2
28#define GPIO_IRQ_NEC 3
29#define GPIO_IRQ_ETHA 4
30#define GPIO_IRQ_ETHB 5
31#define GPIO_HSS0_DCD_N 6
32#define GPIO_HSS1_DCD_N 7
33#define GPIO_UART0_DCD 8
34#define GPIO_UART1_DCD 9
35#define GPIO_HSS0_CTS_N 10
36#define GPIO_HSS1_CTS_N 11
37#define GPIO_IRQ_MPCI 12
38#define GPIO_HSS1_RTS_N 13
39#define GPIO_HSS0_RTS_N 14
40
41
42
43#define CONTROL_HSS0_CLK_INT 0
44#define CONTROL_HSS1_CLK_INT 1
45#define CONTROL_HSS0_DTR_N 2
46#define CONTROL_HSS1_DTR_N 3
47#define CONTROL_EXT 4
48#define CONTROL_AUTO_RESET 5
49#define CONTROL_PCI_RESET_N 6
50#define CONTROL_EEPROM_WC_N 7
51
52
53#define CFG_ETH0_ADDRESS 0x40
54#define CFG_ETH1_ADDRESS 0x46
55#define CFG_REV 0x4C
56#define CFG_SDRAM_SIZE 0x50
57#define CFG_SDRAM_CONF 0x54
58#define CFG_SDRAM_MODE 0x58
59#define CFG_SDRAM_REFRESH 0x5C
60
61#define CFG_HW_BITS 0x60
62#define CFG_HW_USB_PORTS 0x00000007
63#define CFG_HW_HAS_PCI_SLOT 0x00000008
64#define CFG_HW_HAS_ETH0 0x00000010
65#define CFG_HW_HAS_ETH1 0x00000020
66#define CFG_HW_HAS_HSS0 0x00000040
67#define CFG_HW_HAS_HSS1 0x00000080
68#define CFG_HW_HAS_UART0 0x00000100
69#define CFG_HW_HAS_UART1 0x00000200
70#define CFG_HW_HAS_EEPROM 0x00000400
71
72#define FLASH_CMD_READ_ARRAY 0xFF
73#define FLASH_CMD_READ_ID 0x90
74#define FLASH_SER_OFF 0x102
75
76static u32 hw_bits = 0xFFFFFFFD; ;
77static u8 control_value;
78
79static void set_scl(u8 value)
80{
81 gpio_line_set(GPIO_SCL, !!value);
82 udelay(3);
83}
84
85static void set_sda(u8 value)
86{
87 gpio_line_set(GPIO_SDA, !!value);
88 udelay(3);
89}
90
91static void set_str(u8 value)
92{
93 gpio_line_set(GPIO_STR, !!value);
94 udelay(3);
95}
96
97static inline void set_control(int line, int value)
98{
99 if (value)
100 control_value |= (1 << line);
101 else
102 control_value &= ~(1 << line);
103}
104
105
106static void output_control(void)
107{
108 int i;
109
110 gpio_line_config(GPIO_SCL, IXP4XX_GPIO_OUT);
111 gpio_line_config(GPIO_SDA, IXP4XX_GPIO_OUT);
112
113 for (i = 0; i < 8; i++) {
114 set_scl(0);
115 set_sda(control_value & (0x80 >> i));
116 set_scl(1);
117 }
118
119 set_str(1);
120 set_str(0);
121
122 set_scl(0);
123 set_sda(1);
124 set_scl(1);
125}
126
127
128static void (*set_carrier_cb_tab[2])(void *pdev, int carrier);
129
130static int hss_set_clock(int port, unsigned int clock_type)
131{
132 int ctrl_int = port ? CONTROL_HSS1_CLK_INT : CONTROL_HSS0_CLK_INT;
133
134 switch (clock_type) {
135 case CLOCK_DEFAULT:
136 case CLOCK_EXT:
137 set_control(ctrl_int, 0);
138 output_control();
139 return CLOCK_EXT;
140
141 case CLOCK_INT:
142 set_control(ctrl_int, 1);
143 output_control();
144 return CLOCK_INT;
145
146 default:
147 return -EINVAL;
148 }
149}
150
151static irqreturn_t hss_dcd_irq(int irq, void *pdev)
152{
153 int i, port = (irq == IXP4XX_GPIO_IRQ(GPIO_HSS1_DCD_N));
154 gpio_line_get(port ? GPIO_HSS1_DCD_N : GPIO_HSS0_DCD_N, &i);
155 set_carrier_cb_tab[port](pdev, !i);
156 return IRQ_HANDLED;
157}
158
159
160static int hss_open(int port, void *pdev,
161 void (*set_carrier_cb)(void *pdev, int carrier))
162{
163 int i, irq;
164
165 if (!port)
166 irq = IXP4XX_GPIO_IRQ(GPIO_HSS0_DCD_N);
167 else
168 irq = IXP4XX_GPIO_IRQ(GPIO_HSS1_DCD_N);
169
170 gpio_line_get(port ? GPIO_HSS1_DCD_N : GPIO_HSS0_DCD_N, &i);
171 set_carrier_cb(pdev, !i);
172
173 set_carrier_cb_tab[!!port] = set_carrier_cb;
174
175 if ((i = request_irq(irq, hss_dcd_irq, 0, "IXP4xx HSS", pdev)) != 0) {
176 printk(KERN_ERR "ixp4xx_hss: failed to request IRQ%i (%i)\n",
177 irq, i);
178 return i;
179 }
180
181 set_control(port ? CONTROL_HSS1_DTR_N : CONTROL_HSS0_DTR_N, 0);
182 output_control();
183 gpio_line_set(port ? GPIO_HSS1_RTS_N : GPIO_HSS0_RTS_N, 0);
184 return 0;
185}
186
187static void hss_close(int port, void *pdev)
188{
189 free_irq(port ? IXP4XX_GPIO_IRQ(GPIO_HSS1_DCD_N) :
190 IXP4XX_GPIO_IRQ(GPIO_HSS0_DCD_N), pdev);
191 set_carrier_cb_tab[!!port] = NULL;
192
193 set_control(port ? CONTROL_HSS1_DTR_N : CONTROL_HSS0_DTR_N, 1);
194 output_control();
195 gpio_line_set(port ? GPIO_HSS1_RTS_N : GPIO_HSS0_RTS_N, 1);
196}
197
198
199
200static struct flash_platform_data flash_data = {
201 .map_name = "cfi_probe",
202 .width = 2,
203};
204
205static struct resource flash_resource = {
206 .flags = IORESOURCE_MEM,
207};
208
209static struct platform_device device_flash = {
210 .name = "IXP4XX-Flash",
211 .id = 0,
212 .dev = { .platform_data = &flash_data },
213 .num_resources = 1,
214 .resource = &flash_resource,
215};
216
217
218
219static struct i2c_gpio_platform_data i2c_data = {
220 .sda_pin = GPIO_SDA,
221 .scl_pin = GPIO_SCL,
222};
223
224static struct platform_device device_i2c = {
225 .name = "i2c-gpio",
226 .id = 0,
227 .dev = { .platform_data = &i2c_data },
228};
229
230
231
232static struct resource uart_resources[] = {
233 {
234 .start = IXP4XX_UART1_BASE_PHYS,
235 .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
236 .flags = IORESOURCE_MEM,
237 },
238 {
239 .start = IXP4XX_UART2_BASE_PHYS,
240 .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
241 .flags = IORESOURCE_MEM,
242 }
243};
244
245static struct plat_serial8250_port uart_data[] = {
246 {
247 .mapbase = IXP4XX_UART1_BASE_PHYS,
248 .membase = (char __iomem *)IXP4XX_UART1_BASE_VIRT +
249 REG_OFFSET,
250 .irq = IRQ_IXP4XX_UART1,
251 .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
252 .iotype = UPIO_MEM,
253 .regshift = 2,
254 .uartclk = IXP4XX_UART_XTAL,
255 },
256 {
257 .mapbase = IXP4XX_UART2_BASE_PHYS,
258 .membase = (char __iomem *)IXP4XX_UART2_BASE_VIRT +
259 REG_OFFSET,
260 .irq = IRQ_IXP4XX_UART2,
261 .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
262 .iotype = UPIO_MEM,
263 .regshift = 2,
264 .uartclk = IXP4XX_UART_XTAL,
265 },
266 { },
267};
268
269static struct platform_device device_uarts = {
270 .name = "serial8250",
271 .id = PLAT8250_DEV_PLATFORM,
272 .dev.platform_data = uart_data,
273 .num_resources = 2,
274 .resource = uart_resources,
275};
276
277
278
279static struct eth_plat_info eth_plat[] = {
280 {
281 .phy = 0,
282 .rxq = 3,
283 .txreadyq = 32,
284 }, {
285 .phy = 1,
286 .rxq = 4,
287 .txreadyq = 33,
288 }
289};
290
291static struct platform_device device_eth_tab[] = {
292 {
293 .name = "ixp4xx_eth",
294 .id = IXP4XX_ETH_NPEB,
295 .dev.platform_data = eth_plat,
296 }, {
297 .name = "ixp4xx_eth",
298 .id = IXP4XX_ETH_NPEC,
299 .dev.platform_data = eth_plat + 1,
300 }
301};
302
303
304
305static struct hss_plat_info hss_plat[] = {
306 {
307 .set_clock = hss_set_clock,
308 .open = hss_open,
309 .close = hss_close,
310 .txreadyq = 34,
311 }, {
312 .set_clock = hss_set_clock,
313 .open = hss_open,
314 .close = hss_close,
315 .txreadyq = 35,
316 }
317};
318
319static struct platform_device device_hss_tab[] = {
320 {
321 .name = "ixp4xx_hss",
322 .id = 0,
323 .dev.platform_data = hss_plat,
324 }, {
325 .name = "ixp4xx_hss",
326 .id = 1,
327 .dev.platform_data = hss_plat + 1,
328 }
329};
330
331
332static struct platform_device *device_tab[6] __initdata = {
333 &device_flash,
334};
335
336static inline u8 __init flash_readb(u8 __iomem *flash, u32 addr)
337{
338#ifdef __ARMEB__
339 return __raw_readb(flash + addr);
340#else
341 return __raw_readb(flash + (addr ^ 3));
342#endif
343}
344
345static inline u16 __init flash_readw(u8 __iomem *flash, u32 addr)
346{
347#ifdef __ARMEB__
348 return __raw_readw(flash + addr);
349#else
350 return __raw_readw(flash + (addr ^ 2));
351#endif
352}
353
354static void __init gmlr_init(void)
355{
356 u8 __iomem *flash;
357 int i, devices = 1;
358
359 ixp4xx_sys_init();
360
361 if ((flash = ioremap(IXP4XX_EXP_BUS_BASE_PHYS, 0x80)) == NULL)
362 printk(KERN_ERR "goramo-mlr: unable to access system"
363 " configuration data\n");
364 else {
365 system_rev = __raw_readl(flash + CFG_REV);
366 hw_bits = __raw_readl(flash + CFG_HW_BITS);
367
368 for (i = 0; i < ETH_ALEN; i++) {
369 eth_plat[0].hwaddr[i] =
370 flash_readb(flash, CFG_ETH0_ADDRESS + i);
371 eth_plat[1].hwaddr[i] =
372 flash_readb(flash, CFG_ETH1_ADDRESS + i);
373 }
374
375 __raw_writew(FLASH_CMD_READ_ID, flash);
376 system_serial_high = flash_readw(flash, FLASH_SER_OFF);
377 system_serial_high <<= 16;
378 system_serial_high |= flash_readw(flash, FLASH_SER_OFF + 2);
379 system_serial_low = flash_readw(flash, FLASH_SER_OFF + 4);
380 system_serial_low <<= 16;
381 system_serial_low |= flash_readw(flash, FLASH_SER_OFF + 6);
382 __raw_writew(FLASH_CMD_READ_ARRAY, flash);
383
384 iounmap(flash);
385 }
386
387 switch (hw_bits & (CFG_HW_HAS_UART0 | CFG_HW_HAS_UART1)) {
388 case CFG_HW_HAS_UART0:
389 memset(&uart_data[1], 0, sizeof(uart_data[1]));
390 device_uarts.num_resources = 1;
391 break;
392
393 case CFG_HW_HAS_UART1:
394 device_uarts.dev.platform_data = &uart_data[1];
395 device_uarts.resource = &uart_resources[1];
396 device_uarts.num_resources = 1;
397 break;
398 }
399 if (hw_bits & (CFG_HW_HAS_UART0 | CFG_HW_HAS_UART1))
400 device_tab[devices++] = &device_uarts;
401
402 if (hw_bits & CFG_HW_HAS_ETH0)
403 device_tab[devices++] = &device_eth_tab[0];
404 if (hw_bits & CFG_HW_HAS_ETH1)
405 device_tab[devices++] = &device_eth_tab[1];
406
407 if (hw_bits & CFG_HW_HAS_HSS0)
408 device_tab[devices++] = &device_hss_tab[0];
409 if (hw_bits & CFG_HW_HAS_HSS1)
410 device_tab[devices++] = &device_hss_tab[1];
411
412 if (hw_bits & CFG_HW_HAS_EEPROM)
413 device_tab[devices++] = &device_i2c;
414
415 gpio_line_config(GPIO_SCL, IXP4XX_GPIO_OUT);
416 gpio_line_config(GPIO_SDA, IXP4XX_GPIO_OUT);
417 gpio_line_config(GPIO_STR, IXP4XX_GPIO_OUT);
418 gpio_line_config(GPIO_HSS0_RTS_N, IXP4XX_GPIO_OUT);
419 gpio_line_config(GPIO_HSS1_RTS_N, IXP4XX_GPIO_OUT);
420 gpio_line_config(GPIO_HSS0_DCD_N, IXP4XX_GPIO_IN);
421 gpio_line_config(GPIO_HSS1_DCD_N, IXP4XX_GPIO_IN);
422 irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_HSS0_DCD_N), IRQ_TYPE_EDGE_BOTH);
423 irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_HSS1_DCD_N), IRQ_TYPE_EDGE_BOTH);
424
425 set_control(CONTROL_HSS0_DTR_N, 1);
426 set_control(CONTROL_HSS1_DTR_N, 1);
427 set_control(CONTROL_EEPROM_WC_N, 1);
428 set_control(CONTROL_PCI_RESET_N, 1);
429 output_control();
430
431 msleep(1);
432
433 flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
434 flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
435
436 platform_add_devices(device_tab, devices);
437}
438
439
440#ifdef CONFIG_PCI
441static void __init gmlr_pci_preinit(void)
442{
443 irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_IRQ_ETHA), IRQ_TYPE_LEVEL_LOW);
444 irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_IRQ_ETHB), IRQ_TYPE_LEVEL_LOW);
445 irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_IRQ_NEC), IRQ_TYPE_LEVEL_LOW);
446 irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_IRQ_MPCI), IRQ_TYPE_LEVEL_LOW);
447 ixp4xx_pci_preinit();
448}
449
450static void __init gmlr_pci_postinit(void)
451{
452 if ((hw_bits & CFG_HW_USB_PORTS) >= 2 &&
453 (hw_bits & CFG_HW_USB_PORTS) < 5) {
454
455 u32 value, addr = BIT(32 - SLOT_NEC) | 0xE0;
456 if (!ixp4xx_pci_read(addr, NP_CMD_CONFIGREAD, &value)) {
457 value &= ~7;
458 value |= (hw_bits & CFG_HW_USB_PORTS);
459 ixp4xx_pci_write(addr, NP_CMD_CONFIGWRITE, value);
460 }
461 }
462}
463
464static int __init gmlr_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
465{
466 switch(slot) {
467 case SLOT_ETHA: return IXP4XX_GPIO_IRQ(GPIO_IRQ_ETHA);
468 case SLOT_ETHB: return IXP4XX_GPIO_IRQ(GPIO_IRQ_ETHB);
469 case SLOT_NEC: return IXP4XX_GPIO_IRQ(GPIO_IRQ_NEC);
470 default: return IXP4XX_GPIO_IRQ(GPIO_IRQ_MPCI);
471 }
472}
473
474static struct hw_pci gmlr_hw_pci __initdata = {
475 .nr_controllers = 1,
476 .preinit = gmlr_pci_preinit,
477 .postinit = gmlr_pci_postinit,
478 .swizzle = pci_std_swizzle,
479 .setup = ixp4xx_setup,
480 .scan = ixp4xx_scan_bus,
481 .map_irq = gmlr_map_irq,
482};
483
484static int __init gmlr_pci_init(void)
485{
486 if (machine_is_goramo_mlr() &&
487 (hw_bits & (CFG_HW_USB_PORTS | CFG_HW_HAS_PCI_SLOT)))
488 pci_common_init(&gmlr_hw_pci);
489 return 0;
490}
491
492subsys_initcall(gmlr_pci_init);
493#endif
494
495
496MACHINE_START(GORAMO_MLR, "MultiLink")
497
498 .map_io = ixp4xx_map_io,
499 .init_early = ixp4xx_init_early,
500 .init_irq = ixp4xx_init_irq,
501 .timer = &ixp4xx_timer,
502 .atag_offset = 0x100,
503 .init_machine = gmlr_init,
504#if defined(CONFIG_PCI)
505 .dma_zone_size = SZ_64M,
506#endif
507 .restart = ixp4xx_restart,
508MACHINE_END
509
