1
2
3
4
5
6
7
8
9
10
11
12
13
14#include <linux/kernel.h>
15#include <linux/types.h>
16#include <linux/interrupt.h>
17#include <linux/list.h>
18#include <linux/timer.h>
19#include <linux/init.h>
20#include <linux/input.h>
21#include <linux/serial_core.h>
22#include <linux/platform_device.h>
23#include <linux/io.h>
24#include <linux/i2c.h>
25#include <linux/leds.h>
26#include <linux/fb.h>
27#include <linux/gpio.h>
28#include <linux/delay.h>
29#include <linux/smsc911x.h>
30#include <linux/regulator/fixed.h>
31#include <linux/regulator/machine.h>
32#include <linux/pwm_backlight.h>
33
34#ifdef CONFIG_SMDK6410_WM1190_EV1
35#include <linux/mfd/wm8350/core.h>
36#include <linux/mfd/wm8350/pmic.h>
37#endif
38
39#ifdef CONFIG_SMDK6410_WM1192_EV1
40#include <linux/mfd/wm831x/core.h>
41#include <linux/mfd/wm831x/pdata.h>
42#endif
43
44#include <video/platform_lcd.h>
45
46#include <asm/hardware/vic.h>
47#include <asm/mach/arch.h>
48#include <asm/mach/map.h>
49#include <asm/mach/irq.h>
50
51#include <mach/hardware.h>
52#include <mach/map.h>
53
54#include <asm/irq.h>
55#include <asm/mach-types.h>
56
57#include <plat/regs-serial.h>
58#include <mach/regs-modem.h>
59#include <mach/regs-gpio.h>
60#include <mach/regs-sys.h>
61#include <mach/regs-srom.h>
62#include <plat/ata.h>
63#include <plat/iic.h>
64#include <plat/fb.h>
65#include <plat/gpio-cfg.h>
66
67#include <plat/clock.h>
68#include <plat/devs.h>
69#include <plat/cpu.h>
70#include <plat/adc.h>
71#include <plat/ts.h>
72#include <plat/keypad.h>
73#include <plat/backlight.h>
74#include <plat/regs-fb-v4.h>
75#include <plat/udc-hs.h>
76
77#include "common.h"
78
79#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
80#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
81#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
82
83static struct s3c2410_uartcfg smdk6410_uartcfgs[] __initdata = {
84 [0] = {
85 .hwport = 0,
86 .flags = 0,
87 .ucon = UCON,
88 .ulcon = ULCON,
89 .ufcon = UFCON,
90 },
91 [1] = {
92 .hwport = 1,
93 .flags = 0,
94 .ucon = UCON,
95 .ulcon = ULCON,
96 .ufcon = UFCON,
97 },
98 [2] = {
99 .hwport = 2,
100 .flags = 0,
101 .ucon = UCON,
102 .ulcon = ULCON,
103 .ufcon = UFCON,
104 },
105 [3] = {
106 .hwport = 3,
107 .flags = 0,
108 .ucon = UCON,
109 .ulcon = ULCON,
110 .ufcon = UFCON,
111 },
112};
113
114
115
116
117
118
119
120
121
122static void smdk6410_lcd_power_set(struct plat_lcd_data *pd,
123 unsigned int power)
124{
125 if (power) {
126 gpio_direction_output(S3C64XX_GPF(13), 1);
127
128
129 gpio_direction_output(S3C64XX_GPN(5), 0);
130 msleep(10);
131 gpio_direction_output(S3C64XX_GPN(5), 1);
132 msleep(1);
133 } else {
134 gpio_direction_output(S3C64XX_GPF(13), 0);
135 }
136}
137
138static struct plat_lcd_data smdk6410_lcd_power_data = {
139 .set_power = smdk6410_lcd_power_set,
140};
141
142static struct platform_device smdk6410_lcd_powerdev = {
143 .name = "platform-lcd",
144 .dev.parent = &s3c_device_fb.dev,
145 .dev.platform_data = &smdk6410_lcd_power_data,
146};
147
148static struct s3c_fb_pd_win smdk6410_fb_win0 = {
149
150 .win_mode = {
151 .left_margin = 8,
152 .right_margin = 13,
153 .upper_margin = 7,
154 .lower_margin = 5,
155 .hsync_len = 3,
156 .vsync_len = 1,
157 .xres = 800,
158 .yres = 480,
159 },
160 .max_bpp = 32,
161 .default_bpp = 16,
162 .virtual_y = 480 * 2,
163 .virtual_x = 800,
164};
165
166
167static struct s3c_fb_platdata smdk6410_lcd_pdata __initdata = {
168 .setup_gpio = s3c64xx_fb_gpio_setup_24bpp,
169 .win[0] = &smdk6410_fb_win0,
170 .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
171 .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
172};
173
174
175
176
177
178
179
180
181
182
183
184static struct resource smdk6410_smsc911x_resources[] = {
185 [0] = {
186 .start = S3C64XX_PA_XM0CSN1,
187 .end = S3C64XX_PA_XM0CSN1 + SZ_64K - 1,
188 .flags = IORESOURCE_MEM,
189 },
190 [1] = {
191 .start = S3C_EINT(10),
192 .end = S3C_EINT(10),
193 .flags = IORESOURCE_IRQ | IRQ_TYPE_LEVEL_LOW,
194 },
195};
196
197static struct smsc911x_platform_config smdk6410_smsc911x_pdata = {
198 .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
199 .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
200 .flags = SMSC911X_USE_32BIT | SMSC911X_FORCE_INTERNAL_PHY,
201 .phy_interface = PHY_INTERFACE_MODE_MII,
202};
203
204
205static struct platform_device smdk6410_smsc911x = {
206 .name = "smsc911x",
207 .id = -1,
208 .num_resources = ARRAY_SIZE(smdk6410_smsc911x_resources),
209 .resource = &smdk6410_smsc911x_resources[0],
210 .dev = {
211 .platform_data = &smdk6410_smsc911x_pdata,
212 },
213};
214
215#ifdef CONFIG_REGULATOR
216static struct regulator_consumer_supply smdk6410_b_pwr_5v_consumers[] __initdata = {
217 REGULATOR_SUPPLY("PVDD", "0-001b"),
218 REGULATOR_SUPPLY("AVDD", "0-001b"),
219};
220
221static struct regulator_init_data smdk6410_b_pwr_5v_data = {
222 .constraints = {
223 .always_on = 1,
224 },
225 .num_consumer_supplies = ARRAY_SIZE(smdk6410_b_pwr_5v_consumers),
226 .consumer_supplies = smdk6410_b_pwr_5v_consumers,
227};
228
229static struct fixed_voltage_config smdk6410_b_pwr_5v_pdata = {
230 .supply_name = "B_PWR_5V",
231 .microvolts = 5000000,
232 .init_data = &smdk6410_b_pwr_5v_data,
233 .gpio = -EINVAL,
234};
235
236static struct platform_device smdk6410_b_pwr_5v = {
237 .name = "reg-fixed-voltage",
238 .id = -1,
239 .dev = {
240 .platform_data = &smdk6410_b_pwr_5v_pdata,
241 },
242};
243#endif
244
245static struct s3c_ide_platdata smdk6410_ide_pdata __initdata = {
246 .setup_gpio = s3c64xx_ide_setup_gpio,
247};
248
249static uint32_t smdk6410_keymap[] __initdata = {
250
251 KEY(0, 3, KEY_1), KEY(0, 4, KEY_2), KEY(0, 5, KEY_3),
252 KEY(0, 6, KEY_4), KEY(0, 7, KEY_5),
253 KEY(1, 3, KEY_A), KEY(1, 4, KEY_B), KEY(1, 5, KEY_C),
254 KEY(1, 6, KEY_D), KEY(1, 7, KEY_E)
255};
256
257static struct matrix_keymap_data smdk6410_keymap_data __initdata = {
258 .keymap = smdk6410_keymap,
259 .keymap_size = ARRAY_SIZE(smdk6410_keymap),
260};
261
262static struct samsung_keypad_platdata smdk6410_keypad_data __initdata = {
263 .keymap_data = &smdk6410_keymap_data,
264 .rows = 2,
265 .cols = 8,
266};
267
268static struct map_desc smdk6410_iodesc[] = {};
269
270static struct platform_device *smdk6410_devices[] __initdata = {
271#ifdef CONFIG_SMDK6410_SD_CH0
272 &s3c_device_hsmmc0,
273#endif
274#ifdef CONFIG_SMDK6410_SD_CH1
275 &s3c_device_hsmmc1,
276#endif
277 &s3c_device_i2c0,
278 &s3c_device_i2c1,
279 &s3c_device_fb,
280 &s3c_device_ohci,
281 &s3c_device_usb_hsotg,
282 &samsung_asoc_dma,
283 &s3c64xx_device_iisv4,
284 &samsung_device_keypad,
285
286#ifdef CONFIG_REGULATOR
287 &smdk6410_b_pwr_5v,
288#endif
289 &smdk6410_lcd_powerdev,
290
291 &smdk6410_smsc911x,
292 &s3c_device_adc,
293 &s3c_device_cfcon,
294 &s3c_device_rtc,
295 &s3c_device_ts,
296 &s3c_device_wdt,
297};
298
299#ifdef CONFIG_REGULATOR
300
301static struct regulator_consumer_supply smdk6410_vddarm_consumers[] = {
302 REGULATOR_SUPPLY("vddarm", NULL),
303};
304
305
306static struct regulator_init_data smdk6410_vddarm = {
307 .constraints = {
308 .name = "PVDD_ARM",
309 .min_uV = 1000000,
310 .max_uV = 1300000,
311 .always_on = 1,
312 .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
313 },
314 .num_consumer_supplies = ARRAY_SIZE(smdk6410_vddarm_consumers),
315 .consumer_supplies = smdk6410_vddarm_consumers,
316};
317
318
319static struct regulator_init_data smdk6410_vddint = {
320 .constraints = {
321 .name = "PVDD_INT",
322 .min_uV = 1000000,
323 .max_uV = 1200000,
324 .always_on = 1,
325 .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
326 },
327};
328
329
330static struct regulator_init_data smdk6410_vddhi = {
331 .constraints = {
332 .name = "PVDD_HI",
333 .always_on = 1,
334 },
335};
336
337
338static struct regulator_init_data smdk6410_vddpll = {
339 .constraints = {
340 .name = "PVDD_PLL",
341 .always_on = 1,
342 },
343};
344
345
346static struct regulator_init_data smdk6410_vdduh_mmc = {
347 .constraints = {
348 .name = "PVDD_UH+PVDD_MMC",
349 .always_on = 1,
350 },
351};
352
353
354static struct regulator_init_data smdk6410_vccmc3bt = {
355 .constraints = {
356 .name = "PVCCM3BT",
357 .always_on = 1,
358 },
359};
360
361
362static struct regulator_init_data smdk6410_vccm2mtv = {
363 .constraints = {
364 .name = "PVCCM2MTV",
365 .always_on = 1,
366 },
367};
368
369
370static struct regulator_init_data smdk6410_vddlcd = {
371 .constraints = {
372 .name = "PVDD_LCD",
373 .always_on = 1,
374 },
375};
376
377
378static struct regulator_init_data smdk6410_vddotgi = {
379 .constraints = {
380 .name = "PVDD_OTGI",
381 .always_on = 1,
382 },
383};
384
385
386static struct regulator_init_data smdk6410_vddotg = {
387 .constraints = {
388 .name = "PVDD_OTG",
389 .always_on = 1,
390 },
391};
392
393
394static struct regulator_init_data smdk6410_vddalive = {
395 .constraints = {
396 .name = "PVDD_ALIVE",
397 .always_on = 1,
398 },
399};
400
401
402static struct regulator_init_data smdk6410_vddaudio = {
403 .constraints = {
404 .name = "PVDD_AUDIO",
405 .always_on = 1,
406 },
407};
408#endif
409
410#ifdef CONFIG_SMDK6410_WM1190_EV1
411
412static struct regulator_init_data wm8350_dcdc1_data = {
413 .constraints = {
414 .name = "PVDD_INT+PVDD_PLL",
415 .min_uV = 1200000,
416 .max_uV = 1200000,
417 .always_on = 1,
418 .apply_uV = 1,
419 },
420};
421
422
423static struct regulator_init_data wm8350_dcdc3_data = {
424 .constraints = {
425 .name = "PVDD_MEM",
426 .min_uV = 1800000,
427 .max_uV = 1800000,
428 .always_on = 1,
429 .state_mem = {
430 .uV = 1800000,
431 .mode = REGULATOR_MODE_NORMAL,
432 .enabled = 1,
433 },
434 .initial_state = PM_SUSPEND_MEM,
435 },
436};
437
438
439static struct regulator_consumer_supply wm8350_dcdc4_consumers[] = {
440 REGULATOR_SUPPLY("DVDD", "0-001b"),
441};
442
443static struct regulator_init_data wm8350_dcdc4_data = {
444 .constraints = {
445 .name = "PVDD_HI+PVDD_EXT+PVDD_SYS+PVCCM2MTV",
446 .min_uV = 3000000,
447 .max_uV = 3000000,
448 .always_on = 1,
449 },
450 .num_consumer_supplies = ARRAY_SIZE(wm8350_dcdc4_consumers),
451 .consumer_supplies = wm8350_dcdc4_consumers,
452};
453
454
455static struct regulator_init_data wm8350_ldo4_data = {
456 .constraints = {
457 .name = "PVDD_OTGI+HPVDD+AVDD",
458 .min_uV = 1200000,
459 .max_uV = 1200000,
460 .apply_uV = 1,
461 .always_on = 1,
462 },
463};
464
465static struct {
466 int regulator;
467 struct regulator_init_data *initdata;
468} wm1190_regulators[] = {
469 { WM8350_DCDC_1, &wm8350_dcdc1_data },
470 { WM8350_DCDC_3, &wm8350_dcdc3_data },
471 { WM8350_DCDC_4, &wm8350_dcdc4_data },
472 { WM8350_DCDC_6, &smdk6410_vddarm },
473 { WM8350_LDO_1, &smdk6410_vddalive },
474 { WM8350_LDO_2, &smdk6410_vddotg },
475 { WM8350_LDO_3, &smdk6410_vddlcd },
476 { WM8350_LDO_4, &wm8350_ldo4_data },
477};
478
479static int __init smdk6410_wm8350_init(struct wm8350 *wm8350)
480{
481 int i;
482
483
484 s3c_gpio_setpull(S3C64XX_GPN(12), S3C_GPIO_PULL_UP);
485
486
487 for (i = 0; i < ARRAY_SIZE(wm1190_regulators); i++)
488 wm8350_register_regulator(wm8350,
489 wm1190_regulators[i].regulator,
490 wm1190_regulators[i].initdata);
491
492 return 0;
493}
494
495static struct wm8350_platform_data __initdata smdk6410_wm8350_pdata = {
496 .init = smdk6410_wm8350_init,
497 .irq_high = 1,
498 .irq_base = IRQ_BOARD_START,
499};
500#endif
501
502#ifdef CONFIG_SMDK6410_WM1192_EV1
503static struct gpio_led wm1192_pmic_leds[] = {
504 {
505 .name = "PMIC:red:power",
506 .gpio = GPIO_BOARD_START + 3,
507 .default_state = LEDS_GPIO_DEFSTATE_ON,
508 },
509};
510
511static struct gpio_led_platform_data wm1192_pmic_led = {
512 .num_leds = ARRAY_SIZE(wm1192_pmic_leds),
513 .leds = wm1192_pmic_leds,
514};
515
516static struct platform_device wm1192_pmic_led_dev = {
517 .name = "leds-gpio",
518 .id = -1,
519 .dev = {
520 .platform_data = &wm1192_pmic_led,
521 },
522};
523
524static int wm1192_pre_init(struct wm831x *wm831x)
525{
526 int ret;
527
528
529 s3c_gpio_setpull(S3C64XX_GPN(12), S3C_GPIO_PULL_UP);
530
531 ret = platform_device_register(&wm1192_pmic_led_dev);
532 if (ret != 0)
533 dev_err(wm831x->dev, "Failed to add PMIC LED: %d\n", ret);
534
535 return 0;
536}
537
538static struct wm831x_backlight_pdata wm1192_backlight_pdata = {
539 .isink = 1,
540 .max_uA = 27554,
541};
542
543static struct regulator_init_data wm1192_dcdc3 = {
544 .constraints = {
545 .name = "PVDD_MEM+PVDD_GPS",
546 .always_on = 1,
547 },
548};
549
550static struct regulator_consumer_supply wm1192_ldo1_consumers[] = {
551 REGULATOR_SUPPLY("DVDD", "0-001b"),
552};
553
554static struct regulator_init_data wm1192_ldo1 = {
555 .constraints = {
556 .name = "PVDD_LCD+PVDD_EXT",
557 .always_on = 1,
558 },
559 .consumer_supplies = wm1192_ldo1_consumers,
560 .num_consumer_supplies = ARRAY_SIZE(wm1192_ldo1_consumers),
561};
562
563static struct wm831x_status_pdata wm1192_led7_pdata = {
564 .name = "LED7:green:",
565};
566
567static struct wm831x_status_pdata wm1192_led8_pdata = {
568 .name = "LED8:green:",
569};
570
571static struct wm831x_pdata smdk6410_wm1192_pdata = {
572 .pre_init = wm1192_pre_init,
573 .irq_base = IRQ_BOARD_START,
574
575 .backlight = &wm1192_backlight_pdata,
576 .dcdc = {
577 &smdk6410_vddarm,
578 &smdk6410_vddint,
579 &wm1192_dcdc3,
580 },
581 .gpio_base = GPIO_BOARD_START,
582 .ldo = {
583 &wm1192_ldo1,
584 &smdk6410_vdduh_mmc,
585 NULL,
586 &smdk6410_vddotgi,
587 &smdk6410_vddotg,
588 &smdk6410_vddhi,
589 &smdk6410_vddaudio,
590 &smdk6410_vccm2mtv,
591 &smdk6410_vddpll,
592 &smdk6410_vccmc3bt,
593 &smdk6410_vddalive,
594 },
595 .status = {
596 &wm1192_led7_pdata,
597 &wm1192_led8_pdata,
598 },
599};
600#endif
601
602static struct i2c_board_info i2c_devs0[] __initdata = {
603 { I2C_BOARD_INFO("24c08", 0x50), },
604 { I2C_BOARD_INFO("wm8580", 0x1b), },
605
606#ifdef CONFIG_SMDK6410_WM1192_EV1
607 { I2C_BOARD_INFO("wm8312", 0x34),
608 .platform_data = &smdk6410_wm1192_pdata,
609 .irq = S3C_EINT(12),
610 },
611#endif
612
613#ifdef CONFIG_SMDK6410_WM1190_EV1
614 { I2C_BOARD_INFO("wm8350", 0x1a),
615 .platform_data = &smdk6410_wm8350_pdata,
616 .irq = S3C_EINT(12),
617 },
618#endif
619};
620
621static struct i2c_board_info i2c_devs1[] __initdata = {
622 { I2C_BOARD_INFO("24c128", 0x57), },
623};
624
625
626static struct samsung_bl_gpio_info smdk6410_bl_gpio_info = {
627 .no = S3C64XX_GPF(15),
628 .func = S3C_GPIO_SFN(2),
629};
630
631static struct platform_pwm_backlight_data smdk6410_bl_data = {
632 .pwm_id = 1,
633};
634
635static struct s3c_hsotg_plat smdk6410_hsotg_pdata;
636
637static void __init smdk6410_map_io(void)
638{
639 u32 tmp;
640
641 s3c64xx_init_io(smdk6410_iodesc, ARRAY_SIZE(smdk6410_iodesc));
642 s3c24xx_init_clocks(12000000);
643 s3c24xx_init_uarts(smdk6410_uartcfgs, ARRAY_SIZE(smdk6410_uartcfgs));
644
645
646
647 tmp = __raw_readl(S3C64XX_SPCON);
648 tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK;
649 tmp |= S3C64XX_SPCON_LCD_SEL_RGB;
650 __raw_writel(tmp, S3C64XX_SPCON);
651
652
653 tmp = __raw_readl(S3C64XX_MODEM_MIFPCON);
654 tmp &= ~MIFPCON_LCD_BYPASS;
655 __raw_writel(tmp, S3C64XX_MODEM_MIFPCON);
656}
657
658static void __init smdk6410_machine_init(void)
659{
660 u32 cs1;
661
662 s3c_i2c0_set_platdata(NULL);
663 s3c_i2c1_set_platdata(NULL);
664 s3c_fb_set_platdata(&smdk6410_lcd_pdata);
665 s3c_hsotg_set_platdata(&smdk6410_hsotg_pdata);
666
667 samsung_keypad_set_platdata(&smdk6410_keypad_data);
668
669 s3c24xx_ts_set_platdata(NULL);
670
671
672
673 cs1 = __raw_readl(S3C64XX_SROM_BW) &
674 ~(S3C64XX_SROM_BW__CS_MASK << S3C64XX_SROM_BW__NCS1__SHIFT);
675 cs1 |= ((1 << S3C64XX_SROM_BW__DATAWIDTH__SHIFT) |
676 (1 << S3C64XX_SROM_BW__WAITENABLE__SHIFT) |
677 (1 << S3C64XX_SROM_BW__BYTEENABLE__SHIFT)) <<
678 S3C64XX_SROM_BW__NCS1__SHIFT;
679 __raw_writel(cs1, S3C64XX_SROM_BW);
680
681
682
683 __raw_writel((0 << S3C64XX_SROM_BCX__PMC__SHIFT) |
684 (6 << S3C64XX_SROM_BCX__TACP__SHIFT) |
685 (4 << S3C64XX_SROM_BCX__TCAH__SHIFT) |
686 (1 << S3C64XX_SROM_BCX__TCOH__SHIFT) |
687 (0xe << S3C64XX_SROM_BCX__TACC__SHIFT) |
688 (4 << S3C64XX_SROM_BCX__TCOS__SHIFT) |
689 (0 << S3C64XX_SROM_BCX__TACS__SHIFT), S3C64XX_SROM_BC1);
690
691 gpio_request(S3C64XX_GPN(5), "LCD power");
692 gpio_request(S3C64XX_GPF(13), "LCD power");
693
694 i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
695 i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
696
697 s3c_ide_set_platdata(&smdk6410_ide_pdata);
698
699 samsung_bl_set(&smdk6410_bl_gpio_info, &smdk6410_bl_data);
700
701 platform_add_devices(smdk6410_devices, ARRAY_SIZE(smdk6410_devices));
702}
703
704MACHINE_START(SMDK6410, "SMDK6410")
705
706 .atag_offset = 0x100,
707
708 .init_irq = s3c6410_init_irq,
709 .handle_irq = vic_handle_irq,
710 .map_io = smdk6410_map_io,
711 .init_machine = smdk6410_machine_init,
712 .timer = &s3c24xx_timer,
713 .restart = s3c64xx_restart,
714MACHINE_END
715
