/*
 * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
 *              http://www.samsung.com
 *
 * EXYNOS - CPU frequency scaling support for EXYNOS series
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
*/

#include <linux/kernel.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/regulator/consumer.h>
#include <linux/cpufreq.h>
#include <linux/suspend.h>

#include <mach/cpufreq.h>

#include <plat/cpu.h>

static struct exynos_dvfs_info *exynos_info;

static struct regulator *arm_regulator;
static struct cpufreq_freqs freqs;

static unsigned int locking_frequency;
static bool frequency_locked;
static DEFINE_MUTEX(cpufreq_lock);

int exynos_verify_speed(struct cpufreq_policy *policy)
{
        return cpufreq_frequency_table_verify(policy,
                                              exynos_info->freq_table);
}

unsigned int exynos_getspeed(unsigned int cpu)
{
        return clk_get_rate(exynos_info->cpu_clk) / 1000;
}

static int exynos_target(struct cpufreq_policy *policy,
                          unsigned int target_freq,
                          unsigned int relation)
{
        unsigned int index, old_index;
        unsigned int arm_volt, safe_arm_volt = 0;
        int ret = 0;
        struct cpufreq_frequency_table *freq_table = exynos_info->freq_table;
        unsigned int *volt_table = exynos_info->volt_table;
        unsigned int mpll_freq_khz = exynos_info->mpll_freq_khz;

        mutex_lock(&cpufreq_lock);

        freqs.old = policy->cur;

        if (frequency_locked && target_freq != locking_frequency) {
                ret = -EAGAIN;
                goto out;
        }

        if (cpufreq_frequency_table_target(policy, freq_table,
                                           freqs.old, relation, &old_index)) {
                ret = -EINVAL;
                goto out;
        }

        if (cpufreq_frequency_table_target(policy, freq_table,
                                           target_freq, relation, &index)) {
                ret = -EINVAL;
                goto out;
        }

        freqs.new = freq_table[index].frequency;
        freqs.cpu = policy->cpu;

        /*
         * ARM clock source will be changed APLL to MPLL temporary
         * To support this level, need to control regulator for
         * required voltage level
         */
        if (exynos_info->need_apll_change != NULL) {
                if (exynos_info->need_apll_change(old_index, index) &&
                   (freq_table[index].frequency < mpll_freq_khz) &&
                   (freq_table[old_index].frequency < mpll_freq_khz))
                        safe_arm_volt = volt_table[exynos_info->pll_safe_idx];
        }
        arm_volt = volt_table[index];

        cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);

        /* When the new frequency is higher than current frequency */
        if ((freqs.new > freqs.old) && !safe_arm_volt) {
                /* Firstly, voltage up to increase frequency */
                regulator_set_voltage(arm_regulator, arm_volt,
                                arm_volt);
        }

        if (safe_arm_volt)
                regulator_set_voltage(arm_regulator, safe_arm_volt,
                                      safe_arm_volt);
        if (freqs.new != freqs.old)
                exynos_info->set_freq(old_index, index);

        cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);

        /* When the new frequency is lower than current frequency */
        if ((freqs.new < freqs.old) ||
           ((freqs.new > freqs.old) && safe_arm_volt)) {
                /* down the voltage after frequency change */
                regulator_set_voltage(arm_regulator, arm_volt,
                                arm_volt);
        }

out:
        mutex_unlock(&cpufreq_lock);

        return ret;
}

#ifdef CONFIG_PM
static int exynos_cpufreq_suspend(struct cpufreq_policy *policy)
{
        return 0;
}

static int exynos_cpufreq_resume(struct cpufreq_policy *policy)
{
        return 0;
}
#endif

/**
 * exynos_cpufreq_pm_notifier - block CPUFREQ's activities in suspend-resume
 *                      context
 * @notifier
 * @pm_event
 * @v
 *
 * While frequency_locked == true, target() ignores every frequency but
 * locking_frequency. The locking_frequency value is the initial frequency,
 * which is set by the bootloader. In order to eliminate possible
 * inconsistency in clock values, we save and restore frequencies during
 * suspend and resume and block CPUFREQ activities. Note that the standard
 * suspend/resume cannot be used as they are too deep (syscore_ops) for
 * regulator actions.
 */
static int exynos_cpufreq_pm_notifier(struct notifier_block *notifier,
                                       unsigned long pm_event, void *v)
{
        struct cpufreq_policy *policy = cpufreq_cpu_get(0); /* boot CPU */
        static unsigned int saved_frequency;
        unsigned int temp;

        mutex_lock(&cpufreq_lock);
        switch (pm_event) {
        case PM_SUSPEND_PREPARE:
                if (frequency_locked)
                        goto out;

                frequency_locked = true;

                if (locking_frequency) {
                        saved_frequency = exynos_getspeed(0);

                        mutex_unlock(&cpufreq_lock);
                        exynos_target(policy, locking_frequency,
                                      CPUFREQ_RELATION_H);
                        mutex_lock(&cpufreq_lock);
                }
                break;

        case PM_POST_SUSPEND:
                if (saved_frequency) {
                        /*
                         * While frequency_locked, only locking_frequency
                         * is valid for target(). In order to use
                         * saved_frequency while keeping frequency_locked,
                         * we temporarly overwrite locking_frequency.
                         */
                        temp = locking_frequency;
                        locking_frequency = saved_frequency;

                        mutex_unlock(&cpufreq_lock);
                        exynos_target(policy, locking_frequency,
                                      CPUFREQ_RELATION_H);
                        mutex_lock(&cpufreq_lock);

                        locking_frequency = temp;
                }
                frequency_locked = false;
                break;
        }
out:
        mutex_unlock(&cpufreq_lock);

        return NOTIFY_OK;
}

static struct notifier_block exynos_cpufreq_nb = {
        .notifier_call = exynos_cpufreq_pm_notifier,
};

static int exynos_cpufreq_cpu_init(struct cpufreq_policy *policy)
{
        policy->cur = policy->min = policy->max = exynos_getspeed(policy->cpu);

        cpufreq_frequency_table_get_attr(exynos_info->freq_table, policy->cpu);

        locking_frequency = exynos_getspeed(0);

        /* set the transition latency value */
        policy->cpuinfo.transition_latency = 100000;

        /*
         * EXYNOS4 multi-core processors has 2 cores
         * that the frequency cannot be set independently.
         * Each cpu is bound to the same speed.
         * So the affected cpu is all of the cpus.
         */
        if (num_online_cpus() == 1) {
                cpumask_copy(policy->related_cpus, cpu_possible_mask);
                cpumask_copy(policy->cpus, cpu_online_mask);
        } else {
                cpumask_setall(policy->cpus);
        }

        return cpufreq_frequency_table_cpuinfo(policy, exynos_info->freq_table);
}

static struct cpufreq_driver exynos_driver = {
        .flags          = CPUFREQ_STICKY,
        .verify         = exynos_verify_speed,
        .target         = exynos_target,
        .get            = exynos_getspeed,
        .init           = exynos_cpufreq_cpu_init,
        .name           = "exynos_cpufreq",
#ifdef CONFIG_PM
        .suspend        = exynos_cpufreq_suspend,
        .resume         = exynos_cpufreq_resume,
#endif
};

static int __init exynos_cpufreq_init(void)
{
        int ret = -EINVAL;

        exynos_info = kzalloc(sizeof(struct exynos_dvfs_info), GFP_KERNEL);
        if (!exynos_info)
                return -ENOMEM;

        if (soc_is_exynos4210())
                ret = exynos4210_cpufreq_init(exynos_info);
        else if (soc_is_exynos4212() || soc_is_exynos4412())
                ret = exynos4x12_cpufreq_init(exynos_info);
        else if (soc_is_exynos5250())
                ret = exynos5250_cpufreq_init(exynos_info);
        else
                pr_err("%s: CPU type not found\n", __func__);

        if (ret)
                goto err_vdd_arm;

        if (exynos_info->set_freq == NULL) {
                pr_err("%s: No set_freq function (ERR)\n", __func__);
                goto err_vdd_arm;
        }

        arm_regulator = regulator_get(NULL, "vdd_arm");
        if (IS_ERR(arm_regulator)) {
                pr_err("%s: failed to get resource vdd_arm\n", __func__);
                goto err_vdd_arm;
        }

        register_pm_notifier(&exynos_cpufreq_nb);

        if (cpufreq_register_driver(&exynos_driver)) {
                pr_err("%s: failed to register cpufreq driver\n", __func__);
                goto err_cpufreq;
        }

        return 0;
err_cpufreq:
        unregister_pm_notifier(&exynos_cpufreq_nb);

        if (!IS_ERR(arm_regulator))
                regulator_put(arm_regulator);
err_vdd_arm:
        kfree(exynos_info);
        pr_debug("%s: failed initialization\n", __func__);
        return -EINVAL;
}
late_initcall(exynos_cpufreq_init);