linux/drivers/hwmon/adt7475.c
<<
>>
Prefs
   1/*
   2 * adt7475 - Thermal sensor driver for the ADT7475 chip and derivatives
   3 * Copyright (C) 2007-2008, Advanced Micro Devices, Inc.
   4 * Copyright (C) 2008 Jordan Crouse <jordan@cosmicpenguin.net>
   5 * Copyright (C) 2008 Hans de Goede <hdegoede@redhat.com>
   6 * Copyright (C) 2009 Jean Delvare <khali@linux-fr.org>
   7 *
   8 * Derived from the lm83 driver by Jean Delvare
   9 *
  10 * This program is free software; you can redistribute it and/or modify
  11 * it under the terms of the GNU General Public License version 2 as
  12 * published by the Free Software Foundation.
  13 */
  14
  15#include <linux/module.h>
  16#include <linux/init.h>
  17#include <linux/slab.h>
  18#include <linux/i2c.h>
  19#include <linux/hwmon.h>
  20#include <linux/hwmon-sysfs.h>
  21#include <linux/hwmon-vid.h>
  22#include <linux/err.h>
  23
  24/* Indexes for the sysfs hooks */
  25
  26#define INPUT           0
  27#define MIN             1
  28#define MAX             2
  29#define CONTROL         3
  30#define OFFSET          3
  31#define AUTOMIN         4
  32#define THERM           5
  33#define HYSTERSIS       6
  34
  35/*
  36 * These are unique identifiers for the sysfs functions - unlike the
  37 * numbers above, these are not also indexes into an array
  38 */
  39
  40#define ALARM           9
  41#define FAULT           10
  42
  43/* 7475 Common Registers */
  44
  45#define REG_DEVREV2             0x12    /* ADT7490 only */
  46
  47#define REG_VTT                 0x1E    /* ADT7490 only */
  48#define REG_EXTEND3             0x1F    /* ADT7490 only */
  49
  50#define REG_VOLTAGE_BASE        0x20
  51#define REG_TEMP_BASE           0x25
  52#define REG_TACH_BASE           0x28
  53#define REG_PWM_BASE            0x30
  54#define REG_PWM_MAX_BASE        0x38
  55
  56#define REG_DEVID               0x3D
  57#define REG_VENDID              0x3E
  58#define REG_DEVID2              0x3F
  59
  60#define REG_STATUS1             0x41
  61#define REG_STATUS2             0x42
  62
  63#define REG_VID                 0x43    /* ADT7476 only */
  64
  65#define REG_VOLTAGE_MIN_BASE    0x44
  66#define REG_VOLTAGE_MAX_BASE    0x45
  67
  68#define REG_TEMP_MIN_BASE       0x4E
  69#define REG_TEMP_MAX_BASE       0x4F
  70
  71#define REG_TACH_MIN_BASE       0x54
  72
  73#define REG_PWM_CONFIG_BASE     0x5C
  74
  75#define REG_TEMP_TRANGE_BASE    0x5F
  76
  77#define REG_PWM_MIN_BASE        0x64
  78
  79#define REG_TEMP_TMIN_BASE      0x67
  80#define REG_TEMP_THERM_BASE     0x6A
  81
  82#define REG_REMOTE1_HYSTERSIS   0x6D
  83#define REG_REMOTE2_HYSTERSIS   0x6E
  84
  85#define REG_TEMP_OFFSET_BASE    0x70
  86
  87#define REG_CONFIG2             0x73
  88
  89#define REG_EXTEND1             0x76
  90#define REG_EXTEND2             0x77
  91
  92#define REG_CONFIG3             0x78
  93#define REG_CONFIG5             0x7C
  94#define REG_CONFIG4             0x7D
  95
  96#define REG_STATUS4             0x81    /* ADT7490 only */
  97
  98#define REG_VTT_MIN             0x84    /* ADT7490 only */
  99#define REG_VTT_MAX             0x86    /* ADT7490 only */
 100
 101#define VID_VIDSEL              0x80    /* ADT7476 only */
 102
 103#define CONFIG2_ATTN            0x20
 104
 105#define CONFIG3_SMBALERT        0x01
 106#define CONFIG3_THERM           0x02
 107
 108#define CONFIG4_PINFUNC         0x03
 109#define CONFIG4_MAXDUTY         0x08
 110#define CONFIG4_ATTN_IN10       0x30
 111#define CONFIG4_ATTN_IN43       0xC0
 112
 113#define CONFIG5_TWOSCOMP        0x01
 114#define CONFIG5_TEMPOFFSET      0x02
 115#define CONFIG5_VIDGPIO         0x10    /* ADT7476 only */
 116
 117/* ADT7475 Settings */
 118
 119#define ADT7475_VOLTAGE_COUNT   5       /* Not counting Vtt */
 120#define ADT7475_TEMP_COUNT      3
 121#define ADT7475_TACH_COUNT      4
 122#define ADT7475_PWM_COUNT       3
 123
 124/* Macro to read the registers */
 125
 126#define adt7475_read(reg) i2c_smbus_read_byte_data(client, (reg))
 127
 128/* Macros to easily index the registers */
 129
 130#define TACH_REG(idx) (REG_TACH_BASE + ((idx) * 2))
 131#define TACH_MIN_REG(idx) (REG_TACH_MIN_BASE + ((idx) * 2))
 132
 133#define PWM_REG(idx) (REG_PWM_BASE + (idx))
 134#define PWM_MAX_REG(idx) (REG_PWM_MAX_BASE + (idx))
 135#define PWM_MIN_REG(idx) (REG_PWM_MIN_BASE + (idx))
 136#define PWM_CONFIG_REG(idx) (REG_PWM_CONFIG_BASE + (idx))
 137
 138#define VOLTAGE_REG(idx) (REG_VOLTAGE_BASE + (idx))
 139#define VOLTAGE_MIN_REG(idx) (REG_VOLTAGE_MIN_BASE + ((idx) * 2))
 140#define VOLTAGE_MAX_REG(idx) (REG_VOLTAGE_MAX_BASE + ((idx) * 2))
 141
 142#define TEMP_REG(idx) (REG_TEMP_BASE + (idx))
 143#define TEMP_MIN_REG(idx) (REG_TEMP_MIN_BASE + ((idx) * 2))
 144#define TEMP_MAX_REG(idx) (REG_TEMP_MAX_BASE + ((idx) * 2))
 145#define TEMP_TMIN_REG(idx) (REG_TEMP_TMIN_BASE + (idx))
 146#define TEMP_THERM_REG(idx) (REG_TEMP_THERM_BASE + (idx))
 147#define TEMP_OFFSET_REG(idx) (REG_TEMP_OFFSET_BASE + (idx))
 148#define TEMP_TRANGE_REG(idx) (REG_TEMP_TRANGE_BASE + (idx))
 149
 150static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
 151
 152enum chips { adt7473, adt7475, adt7476, adt7490 };
 153
 154static const struct i2c_device_id adt7475_id[] = {
 155        { "adt7473", adt7473 },
 156        { "adt7475", adt7475 },
 157        { "adt7476", adt7476 },
 158        { "adt7490", adt7490 },
 159        { }
 160};
 161MODULE_DEVICE_TABLE(i2c, adt7475_id);
 162
 163struct adt7475_data {
 164        struct device *hwmon_dev;
 165        struct mutex lock;
 166
 167        unsigned long measure_updated;
 168        unsigned long limits_updated;
 169        char valid;
 170
 171        u8 config4;
 172        u8 config5;
 173        u8 has_voltage;
 174        u8 bypass_attn;         /* Bypass voltage attenuator */
 175        u8 has_pwm2:1;
 176        u8 has_fan4:1;
 177        u8 has_vid:1;
 178        u32 alarms;
 179        u16 voltage[3][6];
 180        u16 temp[7][3];
 181        u16 tach[2][4];
 182        u8 pwm[4][3];
 183        u8 range[3];
 184        u8 pwmctl[3];
 185        u8 pwmchan[3];
 186
 187        u8 vid;
 188        u8 vrm;
 189};
 190
 191static struct i2c_driver adt7475_driver;
 192static struct adt7475_data *adt7475_update_device(struct device *dev);
 193static void adt7475_read_hystersis(struct i2c_client *client);
 194static void adt7475_read_pwm(struct i2c_client *client, int index);
 195
 196/* Given a temp value, convert it to register value */
 197
 198static inline u16 temp2reg(struct adt7475_data *data, long val)
 199{
 200        u16 ret;
 201
 202        if (!(data->config5 & CONFIG5_TWOSCOMP)) {
 203                val = SENSORS_LIMIT(val, -64000, 191000);
 204                ret = (val + 64500) / 1000;
 205        } else {
 206                val = SENSORS_LIMIT(val, -128000, 127000);
 207                if (val < -500)
 208                        ret = (256500 + val) / 1000;
 209                else
 210                        ret = (val + 500) / 1000;
 211        }
 212
 213        return ret << 2;
 214}
 215
 216/* Given a register value, convert it to a real temp value */
 217
 218static inline int reg2temp(struct adt7475_data *data, u16 reg)
 219{
 220        if (data->config5 & CONFIG5_TWOSCOMP) {
 221                if (reg >= 512)
 222                        return (reg - 1024) * 250;
 223                else
 224                        return reg * 250;
 225        } else
 226                return (reg - 256) * 250;
 227}
 228
 229static inline int tach2rpm(u16 tach)
 230{
 231        if (tach == 0 || tach == 0xFFFF)
 232                return 0;
 233
 234        return (90000 * 60) / tach;
 235}
 236
 237static inline u16 rpm2tach(unsigned long rpm)
 238{
 239        if (rpm == 0)
 240                return 0;
 241
 242        return SENSORS_LIMIT((90000 * 60) / rpm, 1, 0xFFFF);
 243}
 244
 245/* Scaling factors for voltage inputs, taken from the ADT7490 datasheet */
 246static const int adt7473_in_scaling[ADT7475_VOLTAGE_COUNT + 1][2] = {
 247        { 45, 94 },     /* +2.5V */
 248        { 175, 525 },   /* Vccp */
 249        { 68, 71 },     /* Vcc */
 250        { 93, 47 },     /* +5V */
 251        { 120, 20 },    /* +12V */
 252        { 45, 45 },     /* Vtt */
 253};
 254
 255static inline int reg2volt(int channel, u16 reg, u8 bypass_attn)
 256{
 257        const int *r = adt7473_in_scaling[channel];
 258
 259        if (bypass_attn & (1 << channel))
 260                return DIV_ROUND_CLOSEST(reg * 2250, 1024);
 261        return DIV_ROUND_CLOSEST(reg * (r[0] + r[1]) * 2250, r[1] * 1024);
 262}
 263
 264static inline u16 volt2reg(int channel, long volt, u8 bypass_attn)
 265{
 266        const int *r = adt7473_in_scaling[channel];
 267        long reg;
 268
 269        if (bypass_attn & (1 << channel))
 270                reg = (volt * 1024) / 2250;
 271        else
 272                reg = (volt * r[1] * 1024) / ((r[0] + r[1]) * 2250);
 273        return SENSORS_LIMIT(reg, 0, 1023) & (0xff << 2);
 274}
 275
 276static u16 adt7475_read_word(struct i2c_client *client, int reg)
 277{
 278        u16 val;
 279
 280        val = i2c_smbus_read_byte_data(client, reg);
 281        val |= (i2c_smbus_read_byte_data(client, reg + 1) << 8);
 282
 283        return val;
 284}
 285
 286static void adt7475_write_word(struct i2c_client *client, int reg, u16 val)
 287{
 288        i2c_smbus_write_byte_data(client, reg + 1, val >> 8);
 289        i2c_smbus_write_byte_data(client, reg, val & 0xFF);
 290}
 291
 292/*
 293 * Find the nearest value in a table - used for pwm frequency and
 294 * auto temp range
 295 */
 296static int find_nearest(long val, const int *array, int size)
 297{
 298        int i;
 299
 300        if (val < array[0])
 301                return 0;
 302
 303        if (val > array[size - 1])
 304                return size - 1;
 305
 306        for (i = 0; i < size - 1; i++) {
 307                int a, b;
 308
 309                if (val > array[i + 1])
 310                        continue;
 311
 312                a = val - array[i];
 313                b = array[i + 1] - val;
 314
 315                return (a <= b) ? i : i + 1;
 316        }
 317
 318        return 0;
 319}
 320
 321static ssize_t show_voltage(struct device *dev, struct device_attribute *attr,
 322                            char *buf)
 323{
 324        struct adt7475_data *data = adt7475_update_device(dev);
 325        struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
 326        unsigned short val;
 327
 328        switch (sattr->nr) {
 329        case ALARM:
 330                return sprintf(buf, "%d\n",
 331                               (data->alarms >> sattr->index) & 1);
 332        default:
 333                val = data->voltage[sattr->nr][sattr->index];
 334                return sprintf(buf, "%d\n",
 335                               reg2volt(sattr->index, val, data->bypass_attn));
 336        }
 337}
 338
 339static ssize_t set_voltage(struct device *dev, struct device_attribute *attr,
 340                           const char *buf, size_t count)
 341{
 342
 343        struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
 344        struct i2c_client *client = to_i2c_client(dev);
 345        struct adt7475_data *data = i2c_get_clientdata(client);
 346        unsigned char reg;
 347        long val;
 348
 349        if (kstrtol(buf, 10, &val))
 350                return -EINVAL;
 351
 352        mutex_lock(&data->lock);
 353
 354        data->voltage[sattr->nr][sattr->index] =
 355                                volt2reg(sattr->index, val, data->bypass_attn);
 356
 357        if (sattr->index < ADT7475_VOLTAGE_COUNT) {
 358                if (sattr->nr == MIN)
 359                        reg = VOLTAGE_MIN_REG(sattr->index);
 360                else
 361                        reg = VOLTAGE_MAX_REG(sattr->index);
 362        } else {
 363                if (sattr->nr == MIN)
 364                        reg = REG_VTT_MIN;
 365                else
 366                        reg = REG_VTT_MAX;
 367        }
 368
 369        i2c_smbus_write_byte_data(client, reg,
 370                                  data->voltage[sattr->nr][sattr->index] >> 2);
 371        mutex_unlock(&data->lock);
 372
 373        return count;
 374}
 375
 376static ssize_t show_temp(struct device *dev, struct device_attribute *attr,
 377                         char *buf)
 378{
 379        struct adt7475_data *data = adt7475_update_device(dev);
 380        struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
 381        int out;
 382
 383        switch (sattr->nr) {
 384        case HYSTERSIS:
 385                mutex_lock(&data->lock);
 386                out = data->temp[sattr->nr][sattr->index];
 387                if (sattr->index != 1)
 388                        out = (out >> 4) & 0xF;
 389                else
 390                        out = (out & 0xF);
 391                /*
 392                 * Show the value as an absolute number tied to
 393                 * THERM
 394                 */
 395                out = reg2temp(data, data->temp[THERM][sattr->index]) -
 396                        out * 1000;
 397                mutex_unlock(&data->lock);
 398                break;
 399
 400        case OFFSET:
 401                /*
 402                 * Offset is always 2's complement, regardless of the
 403                 * setting in CONFIG5
 404                 */
 405                mutex_lock(&data->lock);
 406                out = (s8)data->temp[sattr->nr][sattr->index];
 407                if (data->config5 & CONFIG5_TEMPOFFSET)
 408                        out *= 1000;
 409                else
 410                        out *= 500;
 411                mutex_unlock(&data->lock);
 412                break;
 413
 414        case ALARM:
 415                out = (data->alarms >> (sattr->index + 4)) & 1;
 416                break;
 417
 418        case FAULT:
 419                /* Note - only for remote1 and remote2 */
 420                out = !!(data->alarms & (sattr->index ? 0x8000 : 0x4000));
 421                break;
 422
 423        default:
 424                /* All other temp values are in the configured format */
 425                out = reg2temp(data, data->temp[sattr->nr][sattr->index]);
 426        }
 427
 428        return sprintf(buf, "%d\n", out);
 429}
 430
 431static ssize_t set_temp(struct device *dev, struct device_attribute *attr,
 432                        const char *buf, size_t count)
 433{
 434        struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
 435        struct i2c_client *client = to_i2c_client(dev);
 436        struct adt7475_data *data = i2c_get_clientdata(client);
 437        unsigned char reg = 0;
 438        u8 out;
 439        int temp;
 440        long val;
 441
 442        if (kstrtol(buf, 10, &val))
 443                return -EINVAL;
 444
 445        mutex_lock(&data->lock);
 446
 447        /* We need the config register in all cases for temp <-> reg conv. */
 448        data->config5 = adt7475_read(REG_CONFIG5);
 449
 450        switch (sattr->nr) {
 451        case OFFSET:
 452                if (data->config5 & CONFIG5_TEMPOFFSET) {
 453                        val = SENSORS_LIMIT(val, -63000, 127000);
 454                        out = data->temp[OFFSET][sattr->index] = val / 1000;
 455                } else {
 456                        val = SENSORS_LIMIT(val, -63000, 64000);
 457                        out = data->temp[OFFSET][sattr->index] = val / 500;
 458                }
 459                break;
 460
 461        case HYSTERSIS:
 462                /*
 463                 * The value will be given as an absolute value, turn it
 464                 * into an offset based on THERM
 465                 */
 466
 467                /* Read fresh THERM and HYSTERSIS values from the chip */
 468                data->temp[THERM][sattr->index] =
 469                        adt7475_read(TEMP_THERM_REG(sattr->index)) << 2;
 470                adt7475_read_hystersis(client);
 471
 472                temp = reg2temp(data, data->temp[THERM][sattr->index]);
 473                val = SENSORS_LIMIT(val, temp - 15000, temp);
 474                val = (temp - val) / 1000;
 475
 476                if (sattr->index != 1) {
 477                        data->temp[HYSTERSIS][sattr->index] &= 0xF0;
 478                        data->temp[HYSTERSIS][sattr->index] |= (val & 0xF) << 4;
 479                } else {
 480                        data->temp[HYSTERSIS][sattr->index] &= 0x0F;
 481                        data->temp[HYSTERSIS][sattr->index] |= (val & 0xF);
 482                }
 483
 484                out = data->temp[HYSTERSIS][sattr->index];
 485                break;
 486
 487        default:
 488                data->temp[sattr->nr][sattr->index] = temp2reg(data, val);
 489
 490                /*
 491                 * We maintain an extra 2 digits of precision for simplicity
 492                 * - shift those back off before writing the value
 493                 */
 494                out = (u8) (data->temp[sattr->nr][sattr->index] >> 2);
 495        }
 496
 497        switch (sattr->nr) {
 498        case MIN:
 499                reg = TEMP_MIN_REG(sattr->index);
 500                break;
 501        case MAX:
 502                reg = TEMP_MAX_REG(sattr->index);
 503                break;
 504        case OFFSET:
 505                reg = TEMP_OFFSET_REG(sattr->index);
 506                break;
 507        case AUTOMIN:
 508                reg = TEMP_TMIN_REG(sattr->index);
 509                break;
 510        case THERM:
 511                reg = TEMP_THERM_REG(sattr->index);
 512                break;
 513        case HYSTERSIS:
 514                if (sattr->index != 2)
 515                        reg = REG_REMOTE1_HYSTERSIS;
 516                else
 517                        reg = REG_REMOTE2_HYSTERSIS;
 518
 519                break;
 520        }
 521
 522        i2c_smbus_write_byte_data(client, reg, out);
 523
 524        mutex_unlock(&data->lock);
 525        return count;
 526}
 527
 528/*
 529 * Table of autorange values - the user will write the value in millidegrees,
 530 * and we'll convert it
 531 */
 532static const int autorange_table[] = {
 533        2000, 2500, 3330, 4000, 5000, 6670, 8000,
 534        10000, 13330, 16000, 20000, 26670, 32000, 40000,
 535        53330, 80000
 536};
 537
 538static ssize_t show_point2(struct device *dev, struct device_attribute *attr,
 539                           char *buf)
 540{
 541        struct adt7475_data *data = adt7475_update_device(dev);
 542        struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
 543        int out, val;
 544
 545        mutex_lock(&data->lock);
 546        out = (data->range[sattr->index] >> 4) & 0x0F;
 547        val = reg2temp(data, data->temp[AUTOMIN][sattr->index]);
 548        mutex_unlock(&data->lock);
 549
 550        return sprintf(buf, "%d\n", val + autorange_table[out]);
 551}
 552
 553static ssize_t set_point2(struct device *dev, struct device_attribute *attr,
 554                          const char *buf, size_t count)
 555{
 556        struct i2c_client *client = to_i2c_client(dev);
 557        struct adt7475_data *data = i2c_get_clientdata(client);
 558        struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
 559        int temp;
 560        long val;
 561
 562        if (kstrtol(buf, 10, &val))
 563                return -EINVAL;
 564
 565        mutex_lock(&data->lock);
 566
 567        /* Get a fresh copy of the needed registers */
 568        data->config5 = adt7475_read(REG_CONFIG5);
 569        data->temp[AUTOMIN][sattr->index] =
 570                adt7475_read(TEMP_TMIN_REG(sattr->index)) << 2;
 571        data->range[sattr->index] =
 572                adt7475_read(TEMP_TRANGE_REG(sattr->index));
 573
 574        /*
 575         * The user will write an absolute value, so subtract the start point
 576         * to figure the range
 577         */
 578        temp = reg2temp(data, data->temp[AUTOMIN][sattr->index]);
 579        val = SENSORS_LIMIT(val, temp + autorange_table[0],
 580                temp + autorange_table[ARRAY_SIZE(autorange_table) - 1]);
 581        val -= temp;
 582
 583        /* Find the nearest table entry to what the user wrote */
 584        val = find_nearest(val, autorange_table, ARRAY_SIZE(autorange_table));
 585
 586        data->range[sattr->index] &= ~0xF0;
 587        data->range[sattr->index] |= val << 4;
 588
 589        i2c_smbus_write_byte_data(client, TEMP_TRANGE_REG(sattr->index),
 590                                  data->range[sattr->index]);
 591
 592        mutex_unlock(&data->lock);
 593        return count;
 594}
 595
 596static ssize_t show_tach(struct device *dev, struct device_attribute *attr,
 597                         char *buf)
 598{
 599        struct adt7475_data *data = adt7475_update_device(dev);
 600        struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
 601        int out;
 602
 603        if (sattr->nr == ALARM)
 604                out = (data->alarms >> (sattr->index + 10)) & 1;
 605        else
 606                out = tach2rpm(data->tach[sattr->nr][sattr->index]);
 607
 608        return sprintf(buf, "%d\n", out);
 609}
 610
 611static ssize_t set_tach(struct device *dev, struct device_attribute *attr,
 612                        const char *buf, size_t count)
 613{
 614
 615        struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
 616        struct i2c_client *client = to_i2c_client(dev);
 617        struct adt7475_data *data = i2c_get_clientdata(client);
 618        unsigned long val;
 619
 620        if (kstrtoul(buf, 10, &val))
 621                return -EINVAL;
 622
 623        mutex_lock(&data->lock);
 624
 625        data->tach[MIN][sattr->index] = rpm2tach(val);
 626
 627        adt7475_write_word(client, TACH_MIN_REG(sattr->index),
 628                           data->tach[MIN][sattr->index]);
 629
 630        mutex_unlock(&data->lock);
 631        return count;
 632}
 633
 634static ssize_t show_pwm(struct device *dev, struct device_attribute *attr,
 635                        char *buf)
 636{
 637        struct adt7475_data *data = adt7475_update_device(dev);
 638        struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
 639
 640        return sprintf(buf, "%d\n", data->pwm[sattr->nr][sattr->index]);
 641}
 642
 643static ssize_t show_pwmchan(struct device *dev, struct device_attribute *attr,
 644                            char *buf)
 645{
 646        struct adt7475_data *data = adt7475_update_device(dev);
 647        struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
 648
 649        return sprintf(buf, "%d\n", data->pwmchan[sattr->index]);
 650}
 651
 652static ssize_t show_pwmctrl(struct device *dev, struct device_attribute *attr,
 653                            char *buf)
 654{
 655        struct adt7475_data *data = adt7475_update_device(dev);
 656        struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
 657
 658        return sprintf(buf, "%d\n", data->pwmctl[sattr->index]);
 659}
 660
 661static ssize_t set_pwm(struct device *dev, struct device_attribute *attr,
 662                       const char *buf, size_t count)
 663{
 664
 665        struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
 666        struct i2c_client *client = to_i2c_client(dev);
 667        struct adt7475_data *data = i2c_get_clientdata(client);
 668        unsigned char reg = 0;
 669        long val;
 670
 671        if (kstrtol(buf, 10, &val))
 672                return -EINVAL;
 673
 674        mutex_lock(&data->lock);
 675
 676        switch (sattr->nr) {
 677        case INPUT:
 678                /* Get a fresh value for CONTROL */
 679                data->pwm[CONTROL][sattr->index] =
 680                        adt7475_read(PWM_CONFIG_REG(sattr->index));
 681
 682                /*
 683                 * If we are not in manual mode, then we shouldn't allow
 684                 * the user to set the pwm speed
 685                 */
 686                if (((data->pwm[CONTROL][sattr->index] >> 5) & 7) != 7) {
 687                        mutex_unlock(&data->lock);
 688                        return count;
 689                }
 690
 691                reg = PWM_REG(sattr->index);
 692                break;
 693
 694        case MIN:
 695                reg = PWM_MIN_REG(sattr->index);
 696                break;
 697
 698        case MAX:
 699                reg = PWM_MAX_REG(sattr->index);
 700                break;
 701        }
 702
 703        data->pwm[sattr->nr][sattr->index] = SENSORS_LIMIT(val, 0, 0xFF);
 704        i2c_smbus_write_byte_data(client, reg,
 705                                  data->pwm[sattr->nr][sattr->index]);
 706
 707        mutex_unlock(&data->lock);
 708
 709        return count;
 710}
 711
 712/* Called by set_pwmctrl and set_pwmchan */
 713
 714static int hw_set_pwm(struct i2c_client *client, int index,
 715                      unsigned int pwmctl, unsigned int pwmchan)
 716{
 717        struct adt7475_data *data = i2c_get_clientdata(client);
 718        long val = 0;
 719
 720        switch (pwmctl) {
 721        case 0:
 722                val = 0x03;     /* Run at full speed */
 723                break;
 724        case 1:
 725                val = 0x07;     /* Manual mode */
 726                break;
 727        case 2:
 728                switch (pwmchan) {
 729                case 1:
 730                        /* Remote1 controls PWM */
 731                        val = 0x00;
 732                        break;
 733                case 2:
 734                        /* local controls PWM */
 735                        val = 0x01;
 736                        break;
 737                case 4:
 738                        /* remote2 controls PWM */
 739                        val = 0x02;
 740                        break;
 741                case 6:
 742                        /* local/remote2 control PWM */
 743                        val = 0x05;
 744                        break;
 745                case 7:
 746                        /* All three control PWM */
 747                        val = 0x06;
 748                        break;
 749                default:
 750                        return -EINVAL;
 751                }
 752                break;
 753        default:
 754                return -EINVAL;
 755        }
 756
 757        data->pwmctl[index] = pwmctl;
 758        data->pwmchan[index] = pwmchan;
 759
 760        data->pwm[CONTROL][index] &= ~0xE0;
 761        data->pwm[CONTROL][index] |= (val & 7) << 5;
 762
 763        i2c_smbus_write_byte_data(client, PWM_CONFIG_REG(index),
 764                                  data->pwm[CONTROL][index]);
 765
 766        return 0;
 767}
 768
 769static ssize_t set_pwmchan(struct device *dev, struct device_attribute *attr,
 770                           const char *buf, size_t count)
 771{
 772        struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
 773        struct i2c_client *client = to_i2c_client(dev);
 774        struct adt7475_data *data = i2c_get_clientdata(client);
 775        int r;
 776        long val;
 777
 778        if (kstrtol(buf, 10, &val))
 779                return -EINVAL;
 780
 781        mutex_lock(&data->lock);
 782        /* Read Modify Write PWM values */
 783        adt7475_read_pwm(client, sattr->index);
 784        r = hw_set_pwm(client, sattr->index, data->pwmctl[sattr->index], val);
 785        if (r)
 786                count = r;
 787        mutex_unlock(&data->lock);
 788
 789        return count;
 790}
 791
 792static ssize_t set_pwmctrl(struct device *dev, struct device_attribute *attr,
 793                           const char *buf, size_t count)
 794{
 795        struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
 796        struct i2c_client *client = to_i2c_client(dev);
 797        struct adt7475_data *data = i2c_get_clientdata(client);
 798        int r;
 799        long val;
 800
 801        if (kstrtol(buf, 10, &val))
 802                return -EINVAL;
 803
 804        mutex_lock(&data->lock);
 805        /* Read Modify Write PWM values */
 806        adt7475_read_pwm(client, sattr->index);
 807        r = hw_set_pwm(client, sattr->index, val, data->pwmchan[sattr->index]);
 808        if (r)
 809                count = r;
 810        mutex_unlock(&data->lock);
 811
 812        return count;
 813}
 814
 815/* List of frequencies for the PWM */
 816static const int pwmfreq_table[] = {
 817        11, 14, 22, 29, 35, 44, 58, 88
 818};
 819
 820static ssize_t show_pwmfreq(struct device *dev, struct device_attribute *attr,
 821                            char *buf)
 822{
 823        struct adt7475_data *data = adt7475_update_device(dev);
 824        struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
 825
 826        return sprintf(buf, "%d\n",
 827                       pwmfreq_table[data->range[sattr->index] & 7]);
 828}
 829
 830static ssize_t set_pwmfreq(struct device *dev, struct device_attribute *attr,
 831                           const char *buf, size_t count)
 832{
 833        struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
 834        struct i2c_client *client = to_i2c_client(dev);
 835        struct adt7475_data *data = i2c_get_clientdata(client);
 836        int out;
 837        long val;
 838
 839        if (kstrtol(buf, 10, &val))
 840                return -EINVAL;
 841
 842        out = find_nearest(val, pwmfreq_table, ARRAY_SIZE(pwmfreq_table));
 843
 844        mutex_lock(&data->lock);
 845
 846        data->range[sattr->index] =
 847                adt7475_read(TEMP_TRANGE_REG(sattr->index));
 848        data->range[sattr->index] &= ~7;
 849        data->range[sattr->index] |= out;
 850
 851        i2c_smbus_write_byte_data(client, TEMP_TRANGE_REG(sattr->index),
 852                                  data->range[sattr->index]);
 853
 854        mutex_unlock(&data->lock);
 855        return count;
 856}
 857
 858static ssize_t show_pwm_at_crit(struct device *dev,
 859                                struct device_attribute *devattr, char *buf)
 860{
 861        struct adt7475_data *data = adt7475_update_device(dev);
 862        return sprintf(buf, "%d\n", !!(data->config4 & CONFIG4_MAXDUTY));
 863}
 864
 865static ssize_t set_pwm_at_crit(struct device *dev,
 866                               struct device_attribute *devattr,
 867                               const char *buf, size_t count)
 868{
 869        struct i2c_client *client = to_i2c_client(dev);
 870        struct adt7475_data *data = i2c_get_clientdata(client);
 871        long val;
 872
 873        if (kstrtol(buf, 10, &val))
 874                return -EINVAL;
 875        if (val != 0 && val != 1)
 876                return -EINVAL;
 877
 878        mutex_lock(&data->lock);
 879        data->config4 = i2c_smbus_read_byte_data(client, REG_CONFIG4);
 880        if (val)
 881                data->config4 |= CONFIG4_MAXDUTY;
 882        else
 883                data->config4 &= ~CONFIG4_MAXDUTY;
 884        i2c_smbus_write_byte_data(client, REG_CONFIG4, data->config4);
 885        mutex_unlock(&data->lock);
 886
 887        return count;
 888}
 889
 890static ssize_t show_vrm(struct device *dev, struct device_attribute *devattr,
 891                        char *buf)
 892{
 893        struct adt7475_data *data = dev_get_drvdata(dev);
 894        return sprintf(buf, "%d\n", (int)data->vrm);
 895}
 896
 897static ssize_t set_vrm(struct device *dev, struct device_attribute *devattr,
 898                       const char *buf, size_t count)
 899{
 900        struct adt7475_data *data = dev_get_drvdata(dev);
 901        long val;
 902
 903        if (kstrtol(buf, 10, &val))
 904                return -EINVAL;
 905        if (val < 0 || val > 255)
 906                return -EINVAL;
 907        data->vrm = val;
 908
 909        return count;
 910}
 911
 912static ssize_t show_vid(struct device *dev, struct device_attribute *devattr,
 913                        char *buf)
 914{
 915        struct adt7475_data *data = adt7475_update_device(dev);
 916        return sprintf(buf, "%d\n", vid_from_reg(data->vid, data->vrm));
 917}
 918
 919static SENSOR_DEVICE_ATTR_2(in0_input, S_IRUGO, show_voltage, NULL, INPUT, 0);
 920static SENSOR_DEVICE_ATTR_2(in0_max, S_IRUGO | S_IWUSR, show_voltage,
 921                            set_voltage, MAX, 0);
 922static SENSOR_DEVICE_ATTR_2(in0_min, S_IRUGO | S_IWUSR, show_voltage,
 923                            set_voltage, MIN, 0);
 924static SENSOR_DEVICE_ATTR_2(in0_alarm, S_IRUGO, show_voltage, NULL, ALARM, 0);
 925static SENSOR_DEVICE_ATTR_2(in1_input, S_IRUGO, show_voltage, NULL, INPUT, 1);
 926static SENSOR_DEVICE_ATTR_2(in1_max, S_IRUGO | S_IWUSR, show_voltage,
 927                            set_voltage, MAX, 1);
 928static SENSOR_DEVICE_ATTR_2(in1_min, S_IRUGO | S_IWUSR, show_voltage,
 929                            set_voltage, MIN, 1);
 930static SENSOR_DEVICE_ATTR_2(in1_alarm, S_IRUGO, show_voltage, NULL, ALARM, 1);
 931static SENSOR_DEVICE_ATTR_2(in2_input, S_IRUGO, show_voltage, NULL, INPUT, 2);
 932static SENSOR_DEVICE_ATTR_2(in2_max, S_IRUGO | S_IWUSR, show_voltage,
 933                            set_voltage, MAX, 2);
 934static SENSOR_DEVICE_ATTR_2(in2_min, S_IRUGO | S_IWUSR, show_voltage,
 935                            set_voltage, MIN, 2);
 936static SENSOR_DEVICE_ATTR_2(in2_alarm, S_IRUGO, show_voltage, NULL, ALARM, 2);
 937static SENSOR_DEVICE_ATTR_2(in3_input, S_IRUGO, show_voltage, NULL, INPUT, 3);
 938static SENSOR_DEVICE_ATTR_2(in3_max, S_IRUGO | S_IWUSR, show_voltage,
 939                            set_voltage, MAX, 3);
 940static SENSOR_DEVICE_ATTR_2(in3_min, S_IRUGO | S_IWUSR, show_voltage,
 941                            set_voltage, MIN, 3);
 942static SENSOR_DEVICE_ATTR_2(in3_alarm, S_IRUGO, show_voltage, NULL, ALARM, 3);
 943static SENSOR_DEVICE_ATTR_2(in4_input, S_IRUGO, show_voltage, NULL, INPUT, 4);
 944static SENSOR_DEVICE_ATTR_2(in4_max, S_IRUGO | S_IWUSR, show_voltage,
 945                            set_voltage, MAX, 4);
 946static SENSOR_DEVICE_ATTR_2(in4_min, S_IRUGO | S_IWUSR, show_voltage,
 947                            set_voltage, MIN, 4);
 948static SENSOR_DEVICE_ATTR_2(in4_alarm, S_IRUGO, show_voltage, NULL, ALARM, 8);
 949static SENSOR_DEVICE_ATTR_2(in5_input, S_IRUGO, show_voltage, NULL, INPUT, 5);
 950static SENSOR_DEVICE_ATTR_2(in5_max, S_IRUGO | S_IWUSR, show_voltage,
 951                            set_voltage, MAX, 5);
 952static SENSOR_DEVICE_ATTR_2(in5_min, S_IRUGO | S_IWUSR, show_voltage,
 953                            set_voltage, MIN, 5);
 954static SENSOR_DEVICE_ATTR_2(in5_alarm, S_IRUGO, show_voltage, NULL, ALARM, 31);
 955static SENSOR_DEVICE_ATTR_2(temp1_input, S_IRUGO, show_temp, NULL, INPUT, 0);
 956static SENSOR_DEVICE_ATTR_2(temp1_alarm, S_IRUGO, show_temp, NULL, ALARM, 0);
 957static SENSOR_DEVICE_ATTR_2(temp1_fault, S_IRUGO, show_temp, NULL, FAULT, 0);
 958static SENSOR_DEVICE_ATTR_2(temp1_max, S_IRUGO | S_IWUSR, show_temp, set_temp,
 959                            MAX, 0);
 960static SENSOR_DEVICE_ATTR_2(temp1_min, S_IRUGO | S_IWUSR, show_temp, set_temp,
 961                            MIN, 0);
 962static SENSOR_DEVICE_ATTR_2(temp1_offset, S_IRUGO | S_IWUSR, show_temp,
 963                            set_temp, OFFSET, 0);
 964static SENSOR_DEVICE_ATTR_2(temp1_auto_point1_temp, S_IRUGO | S_IWUSR,
 965                            show_temp, set_temp, AUTOMIN, 0);
 966static SENSOR_DEVICE_ATTR_2(temp1_auto_point2_temp, S_IRUGO | S_IWUSR,
 967                            show_point2, set_point2, 0, 0);
 968static SENSOR_DEVICE_ATTR_2(temp1_crit, S_IRUGO | S_IWUSR, show_temp, set_temp,
 969                            THERM, 0);
 970static SENSOR_DEVICE_ATTR_2(temp1_crit_hyst, S_IRUGO | S_IWUSR, show_temp,
 971                            set_temp, HYSTERSIS, 0);
 972static SENSOR_DEVICE_ATTR_2(temp2_input, S_IRUGO, show_temp, NULL, INPUT, 1);
 973static SENSOR_DEVICE_ATTR_2(temp2_alarm, S_IRUGO, show_temp, NULL, ALARM, 1);
 974static SENSOR_DEVICE_ATTR_2(temp2_max, S_IRUGO | S_IWUSR, show_temp, set_temp,
 975                            MAX, 1);
 976static SENSOR_DEVICE_ATTR_2(temp2_min, S_IRUGO | S_IWUSR, show_temp, set_temp,
 977                            MIN, 1);
 978static SENSOR_DEVICE_ATTR_2(temp2_offset, S_IRUGO | S_IWUSR, show_temp,
 979                            set_temp, OFFSET, 1);
 980static SENSOR_DEVICE_ATTR_2(temp2_auto_point1_temp, S_IRUGO | S_IWUSR,
 981                            show_temp, set_temp, AUTOMIN, 1);
 982static SENSOR_DEVICE_ATTR_2(temp2_auto_point2_temp, S_IRUGO | S_IWUSR,
 983                            show_point2, set_point2, 0, 1);
 984static SENSOR_DEVICE_ATTR_2(temp2_crit, S_IRUGO | S_IWUSR, show_temp, set_temp,
 985                            THERM, 1);
 986static SENSOR_DEVICE_ATTR_2(temp2_crit_hyst, S_IRUGO | S_IWUSR, show_temp,
 987                            set_temp, HYSTERSIS, 1);
 988static SENSOR_DEVICE_ATTR_2(temp3_input, S_IRUGO, show_temp, NULL, INPUT, 2);
 989static SENSOR_DEVICE_ATTR_2(temp3_alarm, S_IRUGO, show_temp, NULL, ALARM, 2);
 990static SENSOR_DEVICE_ATTR_2(temp3_fault, S_IRUGO, show_temp, NULL, FAULT, 2);
 991static SENSOR_DEVICE_ATTR_2(temp3_max, S_IRUGO | S_IWUSR, show_temp, set_temp,
 992                            MAX, 2);
 993static SENSOR_DEVICE_ATTR_2(temp3_min, S_IRUGO | S_IWUSR, show_temp, set_temp,
 994                            MIN, 2);
 995static SENSOR_DEVICE_ATTR_2(temp3_offset, S_IRUGO | S_IWUSR, show_temp,
 996                            set_temp, OFFSET, 2);
 997static SENSOR_DEVICE_ATTR_2(temp3_auto_point1_temp, S_IRUGO | S_IWUSR,
 998                            show_temp, set_temp, AUTOMIN, 2);
 999static SENSOR_DEVICE_ATTR_2(temp3_auto_point2_temp, S_IRUGO | S_IWUSR,
1000                            show_point2, set_point2, 0, 2);
1001static SENSOR_DEVICE_ATTR_2(temp3_crit, S_IRUGO | S_IWUSR, show_temp, set_temp,
1002                            THERM, 2);
1003static SENSOR_DEVICE_ATTR_2(temp3_crit_hyst, S_IRUGO | S_IWUSR, show_temp,
1004                            set_temp, HYSTERSIS, 2);
1005static SENSOR_DEVICE_ATTR_2(fan1_input, S_IRUGO, show_tach, NULL, INPUT, 0);
1006static SENSOR_DEVICE_ATTR_2(fan1_min, S_IRUGO | S_IWUSR, show_tach, set_tach,
1007                            MIN, 0);
1008static SENSOR_DEVICE_ATTR_2(fan1_alarm, S_IRUGO, show_tach, NULL, ALARM, 0);
1009static SENSOR_DEVICE_ATTR_2(fan2_input, S_IRUGO, show_tach, NULL, INPUT, 1);
1010static SENSOR_DEVICE_ATTR_2(fan2_min, S_IRUGO | S_IWUSR, show_tach, set_tach,
1011                            MIN, 1);
1012static SENSOR_DEVICE_ATTR_2(fan2_alarm, S_IRUGO, show_tach, NULL, ALARM, 1);
1013static SENSOR_DEVICE_ATTR_2(fan3_input, S_IRUGO, show_tach, NULL, INPUT, 2);
1014static SENSOR_DEVICE_ATTR_2(fan3_min, S_IRUGO | S_IWUSR, show_tach, set_tach,
1015                            MIN, 2);
1016static SENSOR_DEVICE_ATTR_2(fan3_alarm, S_IRUGO, show_tach, NULL, ALARM, 2);
1017static SENSOR_DEVICE_ATTR_2(fan4_input, S_IRUGO, show_tach, NULL, INPUT, 3);
1018static SENSOR_DEVICE_ATTR_2(fan4_min, S_IRUGO | S_IWUSR, show_tach, set_tach,
1019                            MIN, 3);
1020static SENSOR_DEVICE_ATTR_2(fan4_alarm, S_IRUGO, show_tach, NULL, ALARM, 3);
1021static SENSOR_DEVICE_ATTR_2(pwm1, S_IRUGO | S_IWUSR, show_pwm, set_pwm, INPUT,
1022                            0);
1023static SENSOR_DEVICE_ATTR_2(pwm1_freq, S_IRUGO | S_IWUSR, show_pwmfreq,
1024                            set_pwmfreq, INPUT, 0);
1025static SENSOR_DEVICE_ATTR_2(pwm1_enable, S_IRUGO | S_IWUSR, show_pwmctrl,
1026                            set_pwmctrl, INPUT, 0);
1027static SENSOR_DEVICE_ATTR_2(pwm1_auto_channels_temp, S_IRUGO | S_IWUSR,
1028                            show_pwmchan, set_pwmchan, INPUT, 0);
1029static SENSOR_DEVICE_ATTR_2(pwm1_auto_point1_pwm, S_IRUGO | S_IWUSR, show_pwm,
1030                            set_pwm, MIN, 0);
1031static SENSOR_DEVICE_ATTR_2(pwm1_auto_point2_pwm, S_IRUGO | S_IWUSR, show_pwm,
1032                            set_pwm, MAX, 0);
1033static SENSOR_DEVICE_ATTR_2(pwm2, S_IRUGO | S_IWUSR, show_pwm, set_pwm, INPUT,
1034                            1);
1035static SENSOR_DEVICE_ATTR_2(pwm2_freq, S_IRUGO | S_IWUSR, show_pwmfreq,
1036                            set_pwmfreq, INPUT, 1);
1037static SENSOR_DEVICE_ATTR_2(pwm2_enable, S_IRUGO | S_IWUSR, show_pwmctrl,
1038                            set_pwmctrl, INPUT, 1);
1039static SENSOR_DEVICE_ATTR_2(pwm2_auto_channels_temp, S_IRUGO | S_IWUSR,
1040                            show_pwmchan, set_pwmchan, INPUT, 1);
1041static SENSOR_DEVICE_ATTR_2(pwm2_auto_point1_pwm, S_IRUGO | S_IWUSR, show_pwm,
1042                            set_pwm, MIN, 1);
1043static SENSOR_DEVICE_ATTR_2(pwm2_auto_point2_pwm, S_IRUGO | S_IWUSR, show_pwm,
1044                            set_pwm, MAX, 1);
1045static SENSOR_DEVICE_ATTR_2(pwm3, S_IRUGO | S_IWUSR, show_pwm, set_pwm, INPUT,
1046                            2);
1047static SENSOR_DEVICE_ATTR_2(pwm3_freq, S_IRUGO | S_IWUSR, show_pwmfreq,
1048                            set_pwmfreq, INPUT, 2);
1049static SENSOR_DEVICE_ATTR_2(pwm3_enable, S_IRUGO | S_IWUSR, show_pwmctrl,
1050                            set_pwmctrl, INPUT, 2);
1051static SENSOR_DEVICE_ATTR_2(pwm3_auto_channels_temp, S_IRUGO | S_IWUSR,
1052                            show_pwmchan, set_pwmchan, INPUT, 2);
1053static SENSOR_DEVICE_ATTR_2(pwm3_auto_point1_pwm, S_IRUGO | S_IWUSR, show_pwm,
1054                            set_pwm, MIN, 2);
1055static SENSOR_DEVICE_ATTR_2(pwm3_auto_point2_pwm, S_IRUGO | S_IWUSR, show_pwm,
1056                            set_pwm, MAX, 2);
1057
1058/* Non-standard name, might need revisiting */
1059static DEVICE_ATTR(pwm_use_point2_pwm_at_crit, S_IWUSR | S_IRUGO,
1060                   show_pwm_at_crit, set_pwm_at_crit);
1061
1062static DEVICE_ATTR(vrm, S_IWUSR | S_IRUGO, show_vrm, set_vrm);
1063static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL);
1064
1065static struct attribute *adt7475_attrs[] = {
1066        &sensor_dev_attr_in1_input.dev_attr.attr,
1067        &sensor_dev_attr_in1_max.dev_attr.attr,
1068        &sensor_dev_attr_in1_min.dev_attr.attr,
1069        &sensor_dev_attr_in1_alarm.dev_attr.attr,
1070        &sensor_dev_attr_in2_input.dev_attr.attr,
1071        &sensor_dev_attr_in2_max.dev_attr.attr,
1072        &sensor_dev_attr_in2_min.dev_attr.attr,
1073        &sensor_dev_attr_in2_alarm.dev_attr.attr,
1074        &sensor_dev_attr_temp1_input.dev_attr.attr,
1075        &sensor_dev_attr_temp1_alarm.dev_attr.attr,
1076        &sensor_dev_attr_temp1_fault.dev_attr.attr,
1077        &sensor_dev_attr_temp1_max.dev_attr.attr,
1078        &sensor_dev_attr_temp1_min.dev_attr.attr,
1079        &sensor_dev_attr_temp1_offset.dev_attr.attr,
1080        &sensor_dev_attr_temp1_auto_point1_temp.dev_attr.attr,
1081        &sensor_dev_attr_temp1_auto_point2_temp.dev_attr.attr,
1082        &sensor_dev_attr_temp1_crit.dev_attr.attr,
1083        &sensor_dev_attr_temp1_crit_hyst.dev_attr.attr,
1084        &sensor_dev_attr_temp2_input.dev_attr.attr,
1085        &sensor_dev_attr_temp2_alarm.dev_attr.attr,
1086        &sensor_dev_attr_temp2_max.dev_attr.attr,
1087        &sensor_dev_attr_temp2_min.dev_attr.attr,
1088        &sensor_dev_attr_temp2_offset.dev_attr.attr,
1089        &sensor_dev_attr_temp2_auto_point1_temp.dev_attr.attr,
1090        &sensor_dev_attr_temp2_auto_point2_temp.dev_attr.attr,
1091        &sensor_dev_attr_temp2_crit.dev_attr.attr,
1092        &sensor_dev_attr_temp2_crit_hyst.dev_attr.attr,
1093        &sensor_dev_attr_temp3_input.dev_attr.attr,
1094        &sensor_dev_attr_temp3_fault.dev_attr.attr,
1095        &sensor_dev_attr_temp3_alarm.dev_attr.attr,
1096        &sensor_dev_attr_temp3_max.dev_attr.attr,
1097        &sensor_dev_attr_temp3_min.dev_attr.attr,
1098        &sensor_dev_attr_temp3_offset.dev_attr.attr,
1099        &sensor_dev_attr_temp3_auto_point1_temp.dev_attr.attr,
1100        &sensor_dev_attr_temp3_auto_point2_temp.dev_attr.attr,
1101        &sensor_dev_attr_temp3_crit.dev_attr.attr,
1102        &sensor_dev_attr_temp3_crit_hyst.dev_attr.attr,
1103        &sensor_dev_attr_fan1_input.dev_attr.attr,
1104        &sensor_dev_attr_fan1_min.dev_attr.attr,
1105        &sensor_dev_attr_fan1_alarm.dev_attr.attr,
1106        &sensor_dev_attr_fan2_input.dev_attr.attr,
1107        &sensor_dev_attr_fan2_min.dev_attr.attr,
1108        &sensor_dev_attr_fan2_alarm.dev_attr.attr,
1109        &sensor_dev_attr_fan3_input.dev_attr.attr,
1110        &sensor_dev_attr_fan3_min.dev_attr.attr,
1111        &sensor_dev_attr_fan3_alarm.dev_attr.attr,
1112        &sensor_dev_attr_pwm1.dev_attr.attr,
1113        &sensor_dev_attr_pwm1_freq.dev_attr.attr,
1114        &sensor_dev_attr_pwm1_enable.dev_attr.attr,
1115        &sensor_dev_attr_pwm1_auto_channels_temp.dev_attr.attr,
1116        &sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr,
1117        &sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr,
1118        &sensor_dev_attr_pwm3.dev_attr.attr,
1119        &sensor_dev_attr_pwm3_freq.dev_attr.attr,
1120        &sensor_dev_attr_pwm3_enable.dev_attr.attr,
1121        &sensor_dev_attr_pwm3_auto_channels_temp.dev_attr.attr,
1122        &sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr,
1123        &sensor_dev_attr_pwm3_auto_point2_pwm.dev_attr.attr,
1124        &dev_attr_pwm_use_point2_pwm_at_crit.attr,
1125        NULL,
1126};
1127
1128static struct attribute *fan4_attrs[] = {
1129        &sensor_dev_attr_fan4_input.dev_attr.attr,
1130        &sensor_dev_attr_fan4_min.dev_attr.attr,
1131        &sensor_dev_attr_fan4_alarm.dev_attr.attr,
1132        NULL
1133};
1134
1135static struct attribute *pwm2_attrs[] = {
1136        &sensor_dev_attr_pwm2.dev_attr.attr,
1137        &sensor_dev_attr_pwm2_freq.dev_attr.attr,
1138        &sensor_dev_attr_pwm2_enable.dev_attr.attr,
1139        &sensor_dev_attr_pwm2_auto_channels_temp.dev_attr.attr,
1140        &sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr,
1141        &sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr,
1142        NULL
1143};
1144
1145static struct attribute *in0_attrs[] = {
1146        &sensor_dev_attr_in0_input.dev_attr.attr,
1147        &sensor_dev_attr_in0_max.dev_attr.attr,
1148        &sensor_dev_attr_in0_min.dev_attr.attr,
1149        &sensor_dev_attr_in0_alarm.dev_attr.attr,
1150        NULL
1151};
1152
1153static struct attribute *in3_attrs[] = {
1154        &sensor_dev_attr_in3_input.dev_attr.attr,
1155        &sensor_dev_attr_in3_max.dev_attr.attr,
1156        &sensor_dev_attr_in3_min.dev_attr.attr,
1157        &sensor_dev_attr_in3_alarm.dev_attr.attr,
1158        NULL
1159};
1160
1161static struct attribute *in4_attrs[] = {
1162        &sensor_dev_attr_in4_input.dev_attr.attr,
1163        &sensor_dev_attr_in4_max.dev_attr.attr,
1164        &sensor_dev_attr_in4_min.dev_attr.attr,
1165        &sensor_dev_attr_in4_alarm.dev_attr.attr,
1166        NULL
1167};
1168
1169static struct attribute *in5_attrs[] = {
1170        &sensor_dev_attr_in5_input.dev_attr.attr,
1171        &sensor_dev_attr_in5_max.dev_attr.attr,
1172        &sensor_dev_attr_in5_min.dev_attr.attr,
1173        &sensor_dev_attr_in5_alarm.dev_attr.attr,
1174        NULL
1175};
1176
1177static struct attribute *vid_attrs[] = {
1178        &dev_attr_cpu0_vid.attr,
1179        &dev_attr_vrm.attr,
1180        NULL
1181};
1182
1183static struct attribute_group adt7475_attr_group = { .attrs = adt7475_attrs };
1184static struct attribute_group fan4_attr_group = { .attrs = fan4_attrs };
1185static struct attribute_group pwm2_attr_group = { .attrs = pwm2_attrs };
1186static struct attribute_group in0_attr_group = { .attrs = in0_attrs };
1187static struct attribute_group in3_attr_group = { .attrs = in3_attrs };
1188static struct attribute_group in4_attr_group = { .attrs = in4_attrs };
1189static struct attribute_group in5_attr_group = { .attrs = in5_attrs };
1190static struct attribute_group vid_attr_group = { .attrs = vid_attrs };
1191
1192static int adt7475_detect(struct i2c_client *client,
1193                          struct i2c_board_info *info)
1194{
1195        struct i2c_adapter *adapter = client->adapter;
1196        int vendid, devid, devid2;
1197        const char *name;
1198
1199        if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
1200                return -ENODEV;
1201
1202        vendid = adt7475_read(REG_VENDID);
1203        devid2 = adt7475_read(REG_DEVID2);
1204        if (vendid != 0x41 ||           /* Analog Devices */
1205            (devid2 & 0xf8) != 0x68)
1206                return -ENODEV;
1207
1208        devid = adt7475_read(REG_DEVID);
1209        if (devid == 0x73)
1210                name = "adt7473";
1211        else if (devid == 0x75 && client->addr == 0x2e)
1212                name = "adt7475";
1213        else if (devid == 0x76)
1214                name = "adt7476";
1215        else if ((devid2 & 0xfc) == 0x6c)
1216                name = "adt7490";
1217        else {
1218                dev_dbg(&adapter->dev,
1219                        "Couldn't detect an ADT7473/75/76/90 part at "
1220                        "0x%02x\n", (unsigned int)client->addr);
1221                return -ENODEV;
1222        }
1223
1224        strlcpy(info->type, name, I2C_NAME_SIZE);
1225
1226        return 0;
1227}
1228
1229static void adt7475_remove_files(struct i2c_client *client,
1230                                 struct adt7475_data *data)
1231{
1232        sysfs_remove_group(&client->dev.kobj, &adt7475_attr_group);
1233        if (data->has_fan4)
1234                sysfs_remove_group(&client->dev.kobj, &fan4_attr_group);
1235        if (data->has_pwm2)
1236                sysfs_remove_group(&client->dev.kobj, &pwm2_attr_group);
1237        if (data->has_voltage & (1 << 0))
1238                sysfs_remove_group(&client->dev.kobj, &in0_attr_group);
1239        if (data->has_voltage & (1 << 3))
1240                sysfs_remove_group(&client->dev.kobj, &in3_attr_group);
1241        if (data->has_voltage & (1 << 4))
1242                sysfs_remove_group(&client->dev.kobj, &in4_attr_group);
1243        if (data->has_voltage & (1 << 5))
1244                sysfs_remove_group(&client->dev.kobj, &in5_attr_group);
1245        if (data->has_vid)
1246                sysfs_remove_group(&client->dev.kobj, &vid_attr_group);
1247}
1248
1249static int adt7475_probe(struct i2c_client *client,
1250                         const struct i2c_device_id *id)
1251{
1252        static const char * const names[] = {
1253                [adt7473] = "ADT7473",
1254                [adt7475] = "ADT7475",
1255                [adt7476] = "ADT7476",
1256                [adt7490] = "ADT7490",
1257        };
1258
1259        struct adt7475_data *data;
1260        int i, ret = 0, revision;
1261        u8 config2, config3;
1262
1263        data = kzalloc(sizeof(*data), GFP_KERNEL);
1264        if (data == NULL)
1265                return -ENOMEM;
1266
1267        mutex_init(&data->lock);
1268        i2c_set_clientdata(client, data);
1269
1270        /* Initialize device-specific values */
1271        switch (id->driver_data) {
1272        case adt7476:
1273                data->has_voltage = 0x0e;       /* in1 to in3 */
1274                revision = adt7475_read(REG_DEVID2) & 0x07;
1275                break;
1276        case adt7490:
1277                data->has_voltage = 0x3e;       /* in1 to in5 */
1278                revision = adt7475_read(REG_DEVID2) & 0x03;
1279                if (revision == 0x03)
1280                        revision += adt7475_read(REG_DEVREV2);
1281                break;
1282        default:
1283                data->has_voltage = 0x06;       /* in1, in2 */
1284                revision = adt7475_read(REG_DEVID2) & 0x07;
1285        }
1286
1287        config3 = adt7475_read(REG_CONFIG3);
1288        /* Pin PWM2 may alternatively be used for ALERT output */
1289        if (!(config3 & CONFIG3_SMBALERT))
1290                data->has_pwm2 = 1;
1291        /* Meaning of this bit is inverted for the ADT7473-1 */
1292        if (id->driver_data == adt7473 && revision >= 1)
1293                data->has_pwm2 = !data->has_pwm2;
1294
1295        data->config4 = adt7475_read(REG_CONFIG4);
1296        /* Pin TACH4 may alternatively be used for THERM */
1297        if ((data->config4 & CONFIG4_PINFUNC) == 0x0)
1298                data->has_fan4 = 1;
1299
1300        /*
1301         * THERM configuration is more complex on the ADT7476 and ADT7490,
1302         * because 2 different pins (TACH4 and +2.5 Vin) can be used for
1303         * this function
1304         */
1305        if (id->driver_data == adt7490) {
1306                if ((data->config4 & CONFIG4_PINFUNC) == 0x1 &&
1307                    !(config3 & CONFIG3_THERM))
1308                        data->has_fan4 = 1;
1309        }
1310        if (id->driver_data == adt7476 || id->driver_data == adt7490) {
1311                if (!(config3 & CONFIG3_THERM) ||
1312                    (data->config4 & CONFIG4_PINFUNC) == 0x1)
1313                        data->has_voltage |= (1 << 0);          /* in0 */
1314        }
1315
1316        /*
1317         * On the ADT7476, the +12V input pin may instead be used as VID5,
1318         * and VID pins may alternatively be used as GPIO
1319         */
1320        if (id->driver_data == adt7476) {
1321                u8 vid = adt7475_read(REG_VID);
1322                if (!(vid & VID_VIDSEL))
1323                        data->has_voltage |= (1 << 4);          /* in4 */
1324
1325                data->has_vid = !(adt7475_read(REG_CONFIG5) & CONFIG5_VIDGPIO);
1326        }
1327
1328        /* Voltage attenuators can be bypassed, globally or individually */
1329        config2 = adt7475_read(REG_CONFIG2);
1330        if (config2 & CONFIG2_ATTN) {
1331                data->bypass_attn = (0x3 << 3) | 0x3;
1332        } else {
1333                data->bypass_attn = ((data->config4 & CONFIG4_ATTN_IN10) >> 4) |
1334                                    ((data->config4 & CONFIG4_ATTN_IN43) >> 3);
1335        }
1336        data->bypass_attn &= data->has_voltage;
1337
1338        /*
1339         * Call adt7475_read_pwm for all pwm's as this will reprogram any
1340         * pwm's which are disabled to manual mode with 0% duty cycle
1341         */
1342        for (i = 0; i < ADT7475_PWM_COUNT; i++)
1343                adt7475_read_pwm(client, i);
1344
1345        ret = sysfs_create_group(&client->dev.kobj, &adt7475_attr_group);
1346        if (ret)
1347                goto efree;
1348
1349        /* Features that can be disabled individually */
1350        if (data->has_fan4) {
1351                ret = sysfs_create_group(&client->dev.kobj, &fan4_attr_group);
1352                if (ret)
1353                        goto eremove;
1354        }
1355        if (data->has_pwm2) {
1356                ret = sysfs_create_group(&client->dev.kobj, &pwm2_attr_group);
1357                if (ret)
1358                        goto eremove;
1359        }
1360        if (data->has_voltage & (1 << 0)) {
1361                ret = sysfs_create_group(&client->dev.kobj, &in0_attr_group);
1362                if (ret)
1363                        goto eremove;
1364        }
1365        if (data->has_voltage & (1 << 3)) {
1366                ret = sysfs_create_group(&client->dev.kobj, &in3_attr_group);
1367                if (ret)
1368                        goto eremove;
1369        }
1370        if (data->has_voltage & (1 << 4)) {
1371                ret = sysfs_create_group(&client->dev.kobj, &in4_attr_group);
1372                if (ret)
1373                        goto eremove;
1374        }
1375        if (data->has_voltage & (1 << 5)) {
1376                ret = sysfs_create_group(&client->dev.kobj, &in5_attr_group);
1377                if (ret)
1378                        goto eremove;
1379        }
1380        if (data->has_vid) {
1381                data->vrm = vid_which_vrm();
1382                ret = sysfs_create_group(&client->dev.kobj, &vid_attr_group);
1383                if (ret)
1384                        goto eremove;
1385        }
1386
1387        data->hwmon_dev = hwmon_device_register(&client->dev);
1388        if (IS_ERR(data->hwmon_dev)) {
1389                ret = PTR_ERR(data->hwmon_dev);
1390                goto eremove;
1391        }
1392
1393        dev_info(&client->dev, "%s device, revision %d\n",
1394                 names[id->driver_data], revision);
1395        if ((data->has_voltage & 0x11) || data->has_fan4 || data->has_pwm2)
1396                dev_info(&client->dev, "Optional features:%s%s%s%s%s\n",
1397                         (data->has_voltage & (1 << 0)) ? " in0" : "",
1398                         (data->has_voltage & (1 << 4)) ? " in4" : "",
1399                         data->has_fan4 ? " fan4" : "",
1400                         data->has_pwm2 ? " pwm2" : "",
1401                         data->has_vid ? " vid" : "");
1402        if (data->bypass_attn)
1403                dev_info(&client->dev, "Bypassing attenuators on:%s%s%s%s\n",
1404                         (data->bypass_attn & (1 << 0)) ? " in0" : "",
1405                         (data->bypass_attn & (1 << 1)) ? " in1" : "",
1406                         (data->bypass_attn & (1 << 3)) ? " in3" : "",
1407                         (data->bypass_attn & (1 << 4)) ? " in4" : "");
1408
1409        return 0;
1410
1411eremove:
1412        adt7475_remove_files(client, data);
1413efree:
1414        kfree(data);
1415        return ret;
1416}
1417
1418static int adt7475_remove(struct i2c_client *client)
1419{
1420        struct adt7475_data *data = i2c_get_clientdata(client);
1421
1422        hwmon_device_unregister(data->hwmon_dev);
1423        adt7475_remove_files(client, data);
1424        kfree(data);
1425
1426        return 0;
1427}
1428
1429static struct i2c_driver adt7475_driver = {
1430        .class          = I2C_CLASS_HWMON,
1431        .driver = {
1432                .name   = "adt7475",
1433        },
1434        .probe          = adt7475_probe,
1435        .remove         = adt7475_remove,
1436        .id_table       = adt7475_id,
1437        .detect         = adt7475_detect,
1438        .address_list   = normal_i2c,
1439};
1440
1441static void adt7475_read_hystersis(struct i2c_client *client)
1442{
1443        struct adt7475_data *data = i2c_get_clientdata(client);
1444
1445        data->temp[HYSTERSIS][0] = (u16) adt7475_read(REG_REMOTE1_HYSTERSIS);
1446        data->temp[HYSTERSIS][1] = data->temp[HYSTERSIS][0];
1447        data->temp[HYSTERSIS][2] = (u16) adt7475_read(REG_REMOTE2_HYSTERSIS);
1448}
1449
1450static void adt7475_read_pwm(struct i2c_client *client, int index)
1451{
1452        struct adt7475_data *data = i2c_get_clientdata(client);
1453        unsigned int v;
1454
1455        data->pwm[CONTROL][index] = adt7475_read(PWM_CONFIG_REG(index));
1456
1457        /*
1458         * Figure out the internal value for pwmctrl and pwmchan
1459         * based on the current settings
1460         */
1461        v = (data->pwm[CONTROL][index] >> 5) & 7;
1462
1463        if (v == 3)
1464                data->pwmctl[index] = 0;
1465        else if (v == 7)
1466                data->pwmctl[index] = 1;
1467        else if (v == 4) {
1468                /*
1469                 * The fan is disabled - we don't want to
1470                 * support that, so change to manual mode and
1471                 * set the duty cycle to 0 instead
1472                 */
1473                data->pwm[INPUT][index] = 0;
1474                data->pwm[CONTROL][index] &= ~0xE0;
1475                data->pwm[CONTROL][index] |= (7 << 5);
1476
1477                i2c_smbus_write_byte_data(client, PWM_CONFIG_REG(index),
1478                                          data->pwm[INPUT][index]);
1479
1480                i2c_smbus_write_byte_data(client, PWM_CONFIG_REG(index),
1481                                          data->pwm[CONTROL][index]);
1482
1483                data->pwmctl[index] = 1;
1484        } else {
1485                data->pwmctl[index] = 2;
1486
1487                switch (v) {
1488                case 0:
1489                        data->pwmchan[index] = 1;
1490                        break;
1491                case 1:
1492                        data->pwmchan[index] = 2;
1493                        break;
1494                case 2:
1495                        data->pwmchan[index] = 4;
1496                        break;
1497                case 5:
1498                        data->pwmchan[index] = 6;
1499                        break;
1500                case 6:
1501                        data->pwmchan[index] = 7;
1502                        break;
1503                }
1504        }
1505}
1506
1507static struct adt7475_data *adt7475_update_device(struct device *dev)
1508{
1509        struct i2c_client *client = to_i2c_client(dev);
1510        struct adt7475_data *data = i2c_get_clientdata(client);
1511        u16 ext;
1512        int i;
1513
1514        mutex_lock(&data->lock);
1515
1516        /* Measurement values update every 2 seconds */
1517        if (time_after(jiffies, data->measure_updated + HZ * 2) ||
1518            !data->valid) {
1519                data->alarms = adt7475_read(REG_STATUS2) << 8;
1520                data->alarms |= adt7475_read(REG_STATUS1);
1521
1522                ext = (adt7475_read(REG_EXTEND2) << 8) |
1523                        adt7475_read(REG_EXTEND1);
1524                for (i = 0; i < ADT7475_VOLTAGE_COUNT; i++) {
1525                        if (!(data->has_voltage & (1 << i)))
1526                                continue;
1527                        data->voltage[INPUT][i] =
1528                                (adt7475_read(VOLTAGE_REG(i)) << 2) |
1529                                ((ext >> (i * 2)) & 3);
1530                }
1531
1532                for (i = 0; i < ADT7475_TEMP_COUNT; i++)
1533                        data->temp[INPUT][i] =
1534                                (adt7475_read(TEMP_REG(i)) << 2) |
1535                                ((ext >> ((i + 5) * 2)) & 3);
1536
1537                if (data->has_voltage & (1 << 5)) {
1538                        data->alarms |= adt7475_read(REG_STATUS4) << 24;
1539                        ext = adt7475_read(REG_EXTEND3);
1540                        data->voltage[INPUT][5] = adt7475_read(REG_VTT) << 2 |
1541                                ((ext >> 4) & 3);
1542                }
1543
1544                for (i = 0; i < ADT7475_TACH_COUNT; i++) {
1545                        if (i == 3 && !data->has_fan4)
1546                                continue;
1547                        data->tach[INPUT][i] =
1548                                adt7475_read_word(client, TACH_REG(i));
1549                }
1550
1551                /* Updated by hw when in auto mode */
1552                for (i = 0; i < ADT7475_PWM_COUNT; i++) {
1553                        if (i == 1 && !data->has_pwm2)
1554                                continue;
1555                        data->pwm[INPUT][i] = adt7475_read(PWM_REG(i));
1556                }
1557
1558                if (data->has_vid)
1559                        data->vid = adt7475_read(REG_VID) & 0x3f;
1560
1561                data->measure_updated = jiffies;
1562        }
1563
1564        /* Limits and settings, should never change update every 60 seconds */
1565        if (time_after(jiffies, data->limits_updated + HZ * 60) ||
1566            !data->valid) {
1567                data->config4 = adt7475_read(REG_CONFIG4);
1568                data->config5 = adt7475_read(REG_CONFIG5);
1569
1570                for (i = 0; i < ADT7475_VOLTAGE_COUNT; i++) {
1571                        if (!(data->has_voltage & (1 << i)))
1572                                continue;
1573                        /* Adjust values so they match the input precision */
1574                        data->voltage[MIN][i] =
1575                                adt7475_read(VOLTAGE_MIN_REG(i)) << 2;
1576                        data->voltage[MAX][i] =
1577                                adt7475_read(VOLTAGE_MAX_REG(i)) << 2;
1578                }
1579
1580                if (data->has_voltage & (1 << 5)) {
1581                        data->voltage[MIN][5] = adt7475_read(REG_VTT_MIN) << 2;
1582                        data->voltage[MAX][5] = adt7475_read(REG_VTT_MAX) << 2;
1583                }
1584
1585                for (i = 0; i < ADT7475_TEMP_COUNT; i++) {
1586                        /* Adjust values so they match the input precision */
1587                        data->temp[MIN][i] =
1588                                adt7475_read(TEMP_MIN_REG(i)) << 2;
1589                        data->temp[MAX][i] =
1590                                adt7475_read(TEMP_MAX_REG(i)) << 2;
1591                        data->temp[AUTOMIN][i] =
1592                                adt7475_read(TEMP_TMIN_REG(i)) << 2;
1593                        data->temp[THERM][i] =
1594                                adt7475_read(TEMP_THERM_REG(i)) << 2;
1595                        data->temp[OFFSET][i] =
1596                                adt7475_read(TEMP_OFFSET_REG(i));
1597                }
1598                adt7475_read_hystersis(client);
1599
1600                for (i = 0; i < ADT7475_TACH_COUNT; i++) {
1601                        if (i == 3 && !data->has_fan4)
1602                                continue;
1603                        data->tach[MIN][i] =
1604                                adt7475_read_word(client, TACH_MIN_REG(i));
1605                }
1606
1607                for (i = 0; i < ADT7475_PWM_COUNT; i++) {
1608                        if (i == 1 && !data->has_pwm2)
1609                                continue;
1610                        data->pwm[MAX][i] = adt7475_read(PWM_MAX_REG(i));
1611                        data->pwm[MIN][i] = adt7475_read(PWM_MIN_REG(i));
1612                        /* Set the channel and control information */
1613                        adt7475_read_pwm(client, i);
1614                }
1615
1616                data->range[0] = adt7475_read(TEMP_TRANGE_REG(0));
1617                data->range[1] = adt7475_read(TEMP_TRANGE_REG(1));
1618                data->range[2] = adt7475_read(TEMP_TRANGE_REG(2));
1619
1620                data->limits_updated = jiffies;
1621                data->valid = 1;
1622        }
1623
1624        mutex_unlock(&data->lock);
1625
1626        return data;
1627}
1628
1629module_i2c_driver(adt7475_driver);
1630
1631MODULE_AUTHOR("Advanced Micro Devices, Inc");
1632MODULE_DESCRIPTION("adt7475 driver");
1633MODULE_LICENSE("GPL");
1634