linux/drivers/scsi/pm8001/pm8001_sas.c
<<
>>
Prefs
   1/*
   2 * PMC-Sierra SPC 8001 SAS/SATA based host adapters driver
   3 *
   4 * Copyright (c) 2008-2009 USI Co., Ltd.
   5 * All rights reserved.
   6 *
   7 * Redistribution and use in source and binary forms, with or without
   8 * modification, are permitted provided that the following conditions
   9 * are met:
  10 * 1. Redistributions of source code must retain the above copyright
  11 *    notice, this list of conditions, and the following disclaimer,
  12 *    without modification.
  13 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  14 *    substantially similar to the "NO WARRANTY" disclaimer below
  15 *    ("Disclaimer") and any redistribution must be conditioned upon
  16 *    including a substantially similar Disclaimer requirement for further
  17 *    binary redistribution.
  18 * 3. Neither the names of the above-listed copyright holders nor the names
  19 *    of any contributors may be used to endorse or promote products derived
  20 *    from this software without specific prior written permission.
  21 *
  22 * Alternatively, this software may be distributed under the terms of the
  23 * GNU General Public License ("GPL") version 2 as published by the Free
  24 * Software Foundation.
  25 *
  26 * NO WARRANTY
  27 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  28 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  29 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  30 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  31 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  32 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  33 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  34 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  35 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  36 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  37 * POSSIBILITY OF SUCH DAMAGES.
  38 *
  39 */
  40
  41#include <linux/slab.h>
  42#include "pm8001_sas.h"
  43
  44/**
  45 * pm8001_find_tag - from sas task to find out  tag that belongs to this task
  46 * @task: the task sent to the LLDD
  47 * @tag: the found tag associated with the task
  48 */
  49static int pm8001_find_tag(struct sas_task *task, u32 *tag)
  50{
  51        if (task->lldd_task) {
  52                struct pm8001_ccb_info *ccb;
  53                ccb = task->lldd_task;
  54                *tag = ccb->ccb_tag;
  55                return 1;
  56        }
  57        return 0;
  58}
  59
  60/**
  61  * pm8001_tag_clear - clear the tags bitmap
  62  * @pm8001_ha: our hba struct
  63  * @tag: the found tag associated with the task
  64  */
  65static void pm8001_tag_clear(struct pm8001_hba_info *pm8001_ha, u32 tag)
  66{
  67        void *bitmap = pm8001_ha->tags;
  68        clear_bit(tag, bitmap);
  69}
  70
  71static void pm8001_tag_free(struct pm8001_hba_info *pm8001_ha, u32 tag)
  72{
  73        pm8001_tag_clear(pm8001_ha, tag);
  74}
  75
  76static void pm8001_tag_set(struct pm8001_hba_info *pm8001_ha, u32 tag)
  77{
  78        void *bitmap = pm8001_ha->tags;
  79        set_bit(tag, bitmap);
  80}
  81
  82/**
  83  * pm8001_tag_alloc - allocate a empty tag for task used.
  84  * @pm8001_ha: our hba struct
  85  * @tag_out: the found empty tag .
  86  */
  87inline int pm8001_tag_alloc(struct pm8001_hba_info *pm8001_ha, u32 *tag_out)
  88{
  89        unsigned int index, tag;
  90        void *bitmap = pm8001_ha->tags;
  91
  92        index = find_first_zero_bit(bitmap, pm8001_ha->tags_num);
  93        tag = index;
  94        if (tag >= pm8001_ha->tags_num)
  95                return -SAS_QUEUE_FULL;
  96        pm8001_tag_set(pm8001_ha, tag);
  97        *tag_out = tag;
  98        return 0;
  99}
 100
 101void pm8001_tag_init(struct pm8001_hba_info *pm8001_ha)
 102{
 103        int i;
 104        for (i = 0; i < pm8001_ha->tags_num; ++i)
 105                pm8001_tag_clear(pm8001_ha, i);
 106}
 107
 108 /**
 109  * pm8001_mem_alloc - allocate memory for pm8001.
 110  * @pdev: pci device.
 111  * @virt_addr: the allocated virtual address
 112  * @pphys_addr_hi: the physical address high byte address.
 113  * @pphys_addr_lo: the physical address low byte address.
 114  * @mem_size: memory size.
 115  */
 116int pm8001_mem_alloc(struct pci_dev *pdev, void **virt_addr,
 117        dma_addr_t *pphys_addr, u32 *pphys_addr_hi,
 118        u32 *pphys_addr_lo, u32 mem_size, u32 align)
 119{
 120        caddr_t mem_virt_alloc;
 121        dma_addr_t mem_dma_handle;
 122        u64 phys_align;
 123        u64 align_offset = 0;
 124        if (align)
 125                align_offset = (dma_addr_t)align - 1;
 126        mem_virt_alloc =
 127                pci_alloc_consistent(pdev, mem_size + align, &mem_dma_handle);
 128        if (!mem_virt_alloc) {
 129                pm8001_printk("memory allocation error\n");
 130                return -1;
 131        }
 132        memset((void *)mem_virt_alloc, 0, mem_size+align);
 133        *pphys_addr = mem_dma_handle;
 134        phys_align = (*pphys_addr + align_offset) & ~align_offset;
 135        *virt_addr = (void *)mem_virt_alloc + phys_align - *pphys_addr;
 136        *pphys_addr_hi = upper_32_bits(phys_align);
 137        *pphys_addr_lo = lower_32_bits(phys_align);
 138        return 0;
 139}
 140/**
 141  * pm8001_find_ha_by_dev - from domain device which come from sas layer to
 142  * find out our hba struct.
 143  * @dev: the domain device which from sas layer.
 144  */
 145static
 146struct pm8001_hba_info *pm8001_find_ha_by_dev(struct domain_device *dev)
 147{
 148        struct sas_ha_struct *sha = dev->port->ha;
 149        struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
 150        return pm8001_ha;
 151}
 152
 153/**
 154  * pm8001_phy_control - this function should be registered to
 155  * sas_domain_function_template to provide libsas used, note: this is just
 156  * control the HBA phy rather than other expander phy if you want control
 157  * other phy, you should use SMP command.
 158  * @sas_phy: which phy in HBA phys.
 159  * @func: the operation.
 160  * @funcdata: always NULL.
 161  */
 162int pm8001_phy_control(struct asd_sas_phy *sas_phy, enum phy_func func,
 163        void *funcdata)
 164{
 165        int rc = 0, phy_id = sas_phy->id;
 166        struct pm8001_hba_info *pm8001_ha = NULL;
 167        struct sas_phy_linkrates *rates;
 168        DECLARE_COMPLETION_ONSTACK(completion);
 169        unsigned long flags;
 170        pm8001_ha = sas_phy->ha->lldd_ha;
 171        pm8001_ha->phy[phy_id].enable_completion = &completion;
 172        switch (func) {
 173        case PHY_FUNC_SET_LINK_RATE:
 174                rates = funcdata;
 175                if (rates->minimum_linkrate) {
 176                        pm8001_ha->phy[phy_id].minimum_linkrate =
 177                                rates->minimum_linkrate;
 178                }
 179                if (rates->maximum_linkrate) {
 180                        pm8001_ha->phy[phy_id].maximum_linkrate =
 181                                rates->maximum_linkrate;
 182                }
 183                if (pm8001_ha->phy[phy_id].phy_state == 0) {
 184                        PM8001_CHIP_DISP->phy_start_req(pm8001_ha, phy_id);
 185                        wait_for_completion(&completion);
 186                }
 187                PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id,
 188                                              PHY_LINK_RESET);
 189                break;
 190        case PHY_FUNC_HARD_RESET:
 191                if (pm8001_ha->phy[phy_id].phy_state == 0) {
 192                        PM8001_CHIP_DISP->phy_start_req(pm8001_ha, phy_id);
 193                        wait_for_completion(&completion);
 194                }
 195                PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id,
 196                                              PHY_HARD_RESET);
 197                break;
 198        case PHY_FUNC_LINK_RESET:
 199                if (pm8001_ha->phy[phy_id].phy_state == 0) {
 200                        PM8001_CHIP_DISP->phy_start_req(pm8001_ha, phy_id);
 201                        wait_for_completion(&completion);
 202                }
 203                PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id,
 204                                              PHY_LINK_RESET);
 205                break;
 206        case PHY_FUNC_RELEASE_SPINUP_HOLD:
 207                PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id,
 208                                              PHY_LINK_RESET);
 209                break;
 210        case PHY_FUNC_DISABLE:
 211                PM8001_CHIP_DISP->phy_stop_req(pm8001_ha, phy_id);
 212                break;
 213        case PHY_FUNC_GET_EVENTS:
 214                spin_lock_irqsave(&pm8001_ha->lock, flags);
 215                if (-1 == pm8001_bar4_shift(pm8001_ha,
 216                                        (phy_id < 4) ? 0x30000 : 0x40000)) {
 217                        spin_unlock_irqrestore(&pm8001_ha->lock, flags);
 218                        return -EINVAL;
 219                }
 220                {
 221                        struct sas_phy *phy = sas_phy->phy;
 222                        uint32_t *qp = (uint32_t *)(((char *)
 223                                pm8001_ha->io_mem[2].memvirtaddr)
 224                                + 0x1034 + (0x4000 * (phy_id & 3)));
 225
 226                        phy->invalid_dword_count = qp[0];
 227                        phy->running_disparity_error_count = qp[1];
 228                        phy->loss_of_dword_sync_count = qp[3];
 229                        phy->phy_reset_problem_count = qp[4];
 230                }
 231                pm8001_bar4_shift(pm8001_ha, 0);
 232                spin_unlock_irqrestore(&pm8001_ha->lock, flags);
 233                return 0;
 234        default:
 235                rc = -EOPNOTSUPP;
 236        }
 237        msleep(300);
 238        return rc;
 239}
 240
 241/**
 242  * pm8001_scan_start - we should enable all HBA phys by sending the phy_start
 243  * command to HBA.
 244  * @shost: the scsi host data.
 245  */
 246void pm8001_scan_start(struct Scsi_Host *shost)
 247{
 248        int i;
 249        struct pm8001_hba_info *pm8001_ha;
 250        struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
 251        pm8001_ha = sha->lldd_ha;
 252        PM8001_CHIP_DISP->sas_re_init_req(pm8001_ha);
 253        for (i = 0; i < pm8001_ha->chip->n_phy; ++i)
 254                PM8001_CHIP_DISP->phy_start_req(pm8001_ha, i);
 255}
 256
 257int pm8001_scan_finished(struct Scsi_Host *shost, unsigned long time)
 258{
 259        struct sas_ha_struct *ha = SHOST_TO_SAS_HA(shost);
 260
 261        /* give the phy enabling interrupt event time to come in (1s
 262        * is empirically about all it takes) */
 263        if (time < HZ)
 264                return 0;
 265        /* Wait for discovery to finish */
 266        sas_drain_work(ha);
 267        return 1;
 268}
 269
 270/**
 271  * pm8001_task_prep_smp - the dispatcher function, prepare data for smp task
 272  * @pm8001_ha: our hba card information
 273  * @ccb: the ccb which attached to smp task
 274  */
 275static int pm8001_task_prep_smp(struct pm8001_hba_info *pm8001_ha,
 276        struct pm8001_ccb_info *ccb)
 277{
 278        return PM8001_CHIP_DISP->smp_req(pm8001_ha, ccb);
 279}
 280
 281u32 pm8001_get_ncq_tag(struct sas_task *task, u32 *tag)
 282{
 283        struct ata_queued_cmd *qc = task->uldd_task;
 284        if (qc) {
 285                if (qc->tf.command == ATA_CMD_FPDMA_WRITE ||
 286                        qc->tf.command == ATA_CMD_FPDMA_READ) {
 287                        *tag = qc->tag;
 288                        return 1;
 289                }
 290        }
 291        return 0;
 292}
 293
 294/**
 295  * pm8001_task_prep_ata - the dispatcher function, prepare data for sata task
 296  * @pm8001_ha: our hba card information
 297  * @ccb: the ccb which attached to sata task
 298  */
 299static int pm8001_task_prep_ata(struct pm8001_hba_info *pm8001_ha,
 300        struct pm8001_ccb_info *ccb)
 301{
 302        return PM8001_CHIP_DISP->sata_req(pm8001_ha, ccb);
 303}
 304
 305/**
 306  * pm8001_task_prep_ssp_tm - the dispatcher function, prepare task management data
 307  * @pm8001_ha: our hba card information
 308  * @ccb: the ccb which attached to TM
 309  * @tmf: the task management IU
 310  */
 311static int pm8001_task_prep_ssp_tm(struct pm8001_hba_info *pm8001_ha,
 312        struct pm8001_ccb_info *ccb, struct pm8001_tmf_task *tmf)
 313{
 314        return PM8001_CHIP_DISP->ssp_tm_req(pm8001_ha, ccb, tmf);
 315}
 316
 317/**
 318  * pm8001_task_prep_ssp - the dispatcher function,prepare ssp data for ssp task
 319  * @pm8001_ha: our hba card information
 320  * @ccb: the ccb which attached to ssp task
 321  */
 322static int pm8001_task_prep_ssp(struct pm8001_hba_info *pm8001_ha,
 323        struct pm8001_ccb_info *ccb)
 324{
 325        return PM8001_CHIP_DISP->ssp_io_req(pm8001_ha, ccb);
 326}
 327
 328 /* Find the local port id that's attached to this device */
 329static int sas_find_local_port_id(struct domain_device *dev)
 330{
 331        struct domain_device *pdev = dev->parent;
 332
 333        /* Directly attached device */
 334        if (!pdev)
 335                return dev->port->id;
 336        while (pdev) {
 337                struct domain_device *pdev_p = pdev->parent;
 338                if (!pdev_p)
 339                        return pdev->port->id;
 340                pdev = pdev->parent;
 341        }
 342        return 0;
 343}
 344
 345/**
 346  * pm8001_task_exec - queue the task(ssp, smp && ata) to the hardware.
 347  * @task: the task to be execute.
 348  * @num: if can_queue great than 1, the task can be queued up. for SMP task,
 349  * we always execute one one time.
 350  * @gfp_flags: gfp_flags.
 351  * @is_tmf: if it is task management task.
 352  * @tmf: the task management IU
 353  */
 354#define DEV_IS_GONE(pm8001_dev) \
 355        ((!pm8001_dev || (pm8001_dev->dev_type == NO_DEVICE)))
 356static int pm8001_task_exec(struct sas_task *task, const int num,
 357        gfp_t gfp_flags, int is_tmf, struct pm8001_tmf_task *tmf)
 358{
 359        struct domain_device *dev = task->dev;
 360        struct pm8001_hba_info *pm8001_ha;
 361        struct pm8001_device *pm8001_dev;
 362        struct pm8001_port *port = NULL;
 363        struct sas_task *t = task;
 364        struct pm8001_ccb_info *ccb;
 365        u32 tag = 0xdeadbeef, rc, n_elem = 0;
 366        u32 n = num;
 367        unsigned long flags = 0;
 368
 369        if (!dev->port) {
 370                struct task_status_struct *tsm = &t->task_status;
 371                tsm->resp = SAS_TASK_UNDELIVERED;
 372                tsm->stat = SAS_PHY_DOWN;
 373                if (dev->dev_type != SATA_DEV)
 374                        t->task_done(t);
 375                return 0;
 376        }
 377        pm8001_ha = pm8001_find_ha_by_dev(task->dev);
 378        PM8001_IO_DBG(pm8001_ha, pm8001_printk("pm8001_task_exec device \n "));
 379        spin_lock_irqsave(&pm8001_ha->lock, flags);
 380        do {
 381                dev = t->dev;
 382                pm8001_dev = dev->lldd_dev;
 383                port = &pm8001_ha->port[sas_find_local_port_id(dev)];
 384                if (DEV_IS_GONE(pm8001_dev) || !port->port_attached) {
 385                        if (sas_protocol_ata(t->task_proto)) {
 386                                struct task_status_struct *ts = &t->task_status;
 387                                ts->resp = SAS_TASK_UNDELIVERED;
 388                                ts->stat = SAS_PHY_DOWN;
 389
 390                                spin_unlock_irqrestore(&pm8001_ha->lock, flags);
 391                                t->task_done(t);
 392                                spin_lock_irqsave(&pm8001_ha->lock, flags);
 393                                if (n > 1)
 394                                        t = list_entry(t->list.next,
 395                                                        struct sas_task, list);
 396                                continue;
 397                        } else {
 398                                struct task_status_struct *ts = &t->task_status;
 399                                ts->resp = SAS_TASK_UNDELIVERED;
 400                                ts->stat = SAS_PHY_DOWN;
 401                                t->task_done(t);
 402                                if (n > 1)
 403                                        t = list_entry(t->list.next,
 404                                                        struct sas_task, list);
 405                                continue;
 406                        }
 407                }
 408                rc = pm8001_tag_alloc(pm8001_ha, &tag);
 409                if (rc)
 410                        goto err_out;
 411                ccb = &pm8001_ha->ccb_info[tag];
 412
 413                if (!sas_protocol_ata(t->task_proto)) {
 414                        if (t->num_scatter) {
 415                                n_elem = dma_map_sg(pm8001_ha->dev,
 416                                        t->scatter,
 417                                        t->num_scatter,
 418                                        t->data_dir);
 419                                if (!n_elem) {
 420                                        rc = -ENOMEM;
 421                                        goto err_out_tag;
 422                                }
 423                        }
 424                } else {
 425                        n_elem = t->num_scatter;
 426                }
 427
 428                t->lldd_task = ccb;
 429                ccb->n_elem = n_elem;
 430                ccb->ccb_tag = tag;
 431                ccb->task = t;
 432                switch (t->task_proto) {
 433                case SAS_PROTOCOL_SMP:
 434                        rc = pm8001_task_prep_smp(pm8001_ha, ccb);
 435                        break;
 436                case SAS_PROTOCOL_SSP:
 437                        if (is_tmf)
 438                                rc = pm8001_task_prep_ssp_tm(pm8001_ha,
 439                                        ccb, tmf);
 440                        else
 441                                rc = pm8001_task_prep_ssp(pm8001_ha, ccb);
 442                        break;
 443                case SAS_PROTOCOL_SATA:
 444                case SAS_PROTOCOL_STP:
 445                case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:
 446                        rc = pm8001_task_prep_ata(pm8001_ha, ccb);
 447                        break;
 448                default:
 449                        dev_printk(KERN_ERR, pm8001_ha->dev,
 450                                "unknown sas_task proto: 0x%x\n",
 451                                t->task_proto);
 452                        rc = -EINVAL;
 453                        break;
 454                }
 455
 456                if (rc) {
 457                        PM8001_IO_DBG(pm8001_ha,
 458                                pm8001_printk("rc is %x\n", rc));
 459                        goto err_out_tag;
 460                }
 461                /* TODO: select normal or high priority */
 462                spin_lock(&t->task_state_lock);
 463                t->task_state_flags |= SAS_TASK_AT_INITIATOR;
 464                spin_unlock(&t->task_state_lock);
 465                pm8001_dev->running_req++;
 466                if (n > 1)
 467                        t = list_entry(t->list.next, struct sas_task, list);
 468        } while (--n);
 469        rc = 0;
 470        goto out_done;
 471
 472err_out_tag:
 473        pm8001_tag_free(pm8001_ha, tag);
 474err_out:
 475        dev_printk(KERN_ERR, pm8001_ha->dev, "pm8001 exec failed[%d]!\n", rc);
 476        if (!sas_protocol_ata(t->task_proto))
 477                if (n_elem)
 478                        dma_unmap_sg(pm8001_ha->dev, t->scatter, n_elem,
 479                                t->data_dir);
 480out_done:
 481        spin_unlock_irqrestore(&pm8001_ha->lock, flags);
 482        return rc;
 483}
 484
 485/**
 486  * pm8001_queue_command - register for upper layer used, all IO commands sent
 487  * to HBA are from this interface.
 488  * @task: the task to be execute.
 489  * @num: if can_queue great than 1, the task can be queued up. for SMP task,
 490  * we always execute one one time
 491  * @gfp_flags: gfp_flags
 492  */
 493int pm8001_queue_command(struct sas_task *task, const int num,
 494                gfp_t gfp_flags)
 495{
 496        return pm8001_task_exec(task, num, gfp_flags, 0, NULL);
 497}
 498
 499void pm8001_ccb_free(struct pm8001_hba_info *pm8001_ha, u32 ccb_idx)
 500{
 501        pm8001_tag_clear(pm8001_ha, ccb_idx);
 502}
 503
 504/**
 505  * pm8001_ccb_task_free - free the sg for ssp and smp command, free the ccb.
 506  * @pm8001_ha: our hba card information
 507  * @ccb: the ccb which attached to ssp task
 508  * @task: the task to be free.
 509  * @ccb_idx: ccb index.
 510  */
 511void pm8001_ccb_task_free(struct pm8001_hba_info *pm8001_ha,
 512        struct sas_task *task, struct pm8001_ccb_info *ccb, u32 ccb_idx)
 513{
 514        if (!ccb->task)
 515                return;
 516        if (!sas_protocol_ata(task->task_proto))
 517                if (ccb->n_elem)
 518                        dma_unmap_sg(pm8001_ha->dev, task->scatter,
 519                                task->num_scatter, task->data_dir);
 520
 521        switch (task->task_proto) {
 522        case SAS_PROTOCOL_SMP:
 523                dma_unmap_sg(pm8001_ha->dev, &task->smp_task.smp_resp, 1,
 524                        PCI_DMA_FROMDEVICE);
 525                dma_unmap_sg(pm8001_ha->dev, &task->smp_task.smp_req, 1,
 526                        PCI_DMA_TODEVICE);
 527                break;
 528
 529        case SAS_PROTOCOL_SATA:
 530        case SAS_PROTOCOL_STP:
 531        case SAS_PROTOCOL_SSP:
 532        default:
 533                /* do nothing */
 534                break;
 535        }
 536        task->lldd_task = NULL;
 537        ccb->task = NULL;
 538        ccb->ccb_tag = 0xFFFFFFFF;
 539        ccb->open_retry = 0;
 540        pm8001_ccb_free(pm8001_ha, ccb_idx);
 541}
 542
 543 /**
 544  * pm8001_alloc_dev - find a empty pm8001_device
 545  * @pm8001_ha: our hba card information
 546  */
 547struct pm8001_device *pm8001_alloc_dev(struct pm8001_hba_info *pm8001_ha)
 548{
 549        u32 dev;
 550        for (dev = 0; dev < PM8001_MAX_DEVICES; dev++) {
 551                if (pm8001_ha->devices[dev].dev_type == NO_DEVICE) {
 552                        pm8001_ha->devices[dev].id = dev;
 553                        return &pm8001_ha->devices[dev];
 554                }
 555        }
 556        if (dev == PM8001_MAX_DEVICES) {
 557                PM8001_FAIL_DBG(pm8001_ha,
 558                        pm8001_printk("max support %d devices, ignore ..\n",
 559                        PM8001_MAX_DEVICES));
 560        }
 561        return NULL;
 562}
 563
 564static void pm8001_free_dev(struct pm8001_device *pm8001_dev)
 565{
 566        u32 id = pm8001_dev->id;
 567        memset(pm8001_dev, 0, sizeof(*pm8001_dev));
 568        pm8001_dev->id = id;
 569        pm8001_dev->dev_type = NO_DEVICE;
 570        pm8001_dev->device_id = PM8001_MAX_DEVICES;
 571        pm8001_dev->sas_device = NULL;
 572}
 573
 574/**
 575  * pm8001_dev_found_notify - libsas notify a device is found.
 576  * @dev: the device structure which sas layer used.
 577  *
 578  * when libsas find a sas domain device, it should tell the LLDD that
 579  * device is found, and then LLDD register this device to HBA firmware
 580  * by the command "OPC_INB_REG_DEV", after that the HBA will assign a
 581  * device ID(according to device's sas address) and returned it to LLDD. From
 582  * now on, we communicate with HBA FW with the device ID which HBA assigned
 583  * rather than sas address. it is the necessary step for our HBA but it is
 584  * the optional for other HBA driver.
 585  */
 586static int pm8001_dev_found_notify(struct domain_device *dev)
 587{
 588        unsigned long flags = 0;
 589        int res = 0;
 590        struct pm8001_hba_info *pm8001_ha = NULL;
 591        struct domain_device *parent_dev = dev->parent;
 592        struct pm8001_device *pm8001_device;
 593        DECLARE_COMPLETION_ONSTACK(completion);
 594        u32 flag = 0;
 595        pm8001_ha = pm8001_find_ha_by_dev(dev);
 596        spin_lock_irqsave(&pm8001_ha->lock, flags);
 597
 598        pm8001_device = pm8001_alloc_dev(pm8001_ha);
 599        if (!pm8001_device) {
 600                res = -1;
 601                goto found_out;
 602        }
 603        pm8001_device->sas_device = dev;
 604        dev->lldd_dev = pm8001_device;
 605        pm8001_device->dev_type = dev->dev_type;
 606        pm8001_device->dcompletion = &completion;
 607        if (parent_dev && DEV_IS_EXPANDER(parent_dev->dev_type)) {
 608                int phy_id;
 609                struct ex_phy *phy;
 610                for (phy_id = 0; phy_id < parent_dev->ex_dev.num_phys;
 611                phy_id++) {
 612                        phy = &parent_dev->ex_dev.ex_phy[phy_id];
 613                        if (SAS_ADDR(phy->attached_sas_addr)
 614                                == SAS_ADDR(dev->sas_addr)) {
 615                                pm8001_device->attached_phy = phy_id;
 616                                break;
 617                        }
 618                }
 619                if (phy_id == parent_dev->ex_dev.num_phys) {
 620                        PM8001_FAIL_DBG(pm8001_ha,
 621                        pm8001_printk("Error: no attached dev:%016llx"
 622                        " at ex:%016llx.\n", SAS_ADDR(dev->sas_addr),
 623                                SAS_ADDR(parent_dev->sas_addr)));
 624                        res = -1;
 625                }
 626        } else {
 627                if (dev->dev_type == SATA_DEV) {
 628                        pm8001_device->attached_phy =
 629                                dev->rphy->identify.phy_identifier;
 630                                flag = 1; /* directly sata*/
 631                }
 632        } /*register this device to HBA*/
 633        PM8001_DISC_DBG(pm8001_ha, pm8001_printk("Found device\n"));
 634        PM8001_CHIP_DISP->reg_dev_req(pm8001_ha, pm8001_device, flag);
 635        spin_unlock_irqrestore(&pm8001_ha->lock, flags);
 636        wait_for_completion(&completion);
 637        if (dev->dev_type == SAS_END_DEV)
 638                msleep(50);
 639        pm8001_ha->flags = PM8001F_RUN_TIME;
 640        return 0;
 641found_out:
 642        spin_unlock_irqrestore(&pm8001_ha->lock, flags);
 643        return res;
 644}
 645
 646int pm8001_dev_found(struct domain_device *dev)
 647{
 648        return pm8001_dev_found_notify(dev);
 649}
 650
 651static void pm8001_task_done(struct sas_task *task)
 652{
 653        if (!del_timer(&task->timer))
 654                return;
 655        complete(&task->completion);
 656}
 657
 658static void pm8001_tmf_timedout(unsigned long data)
 659{
 660        struct sas_task *task = (struct sas_task *)data;
 661
 662        task->task_state_flags |= SAS_TASK_STATE_ABORTED;
 663        complete(&task->completion);
 664}
 665
 666#define PM8001_TASK_TIMEOUT 20
 667/**
 668  * pm8001_exec_internal_tmf_task - execute some task management commands.
 669  * @dev: the wanted device.
 670  * @tmf: which task management wanted to be take.
 671  * @para_len: para_len.
 672  * @parameter: ssp task parameter.
 673  *
 674  * when errors or exception happened, we may want to do something, for example
 675  * abort the issued task which result in this execption, it is done by calling
 676  * this function, note it is also with the task execute interface.
 677  */
 678static int pm8001_exec_internal_tmf_task(struct domain_device *dev,
 679        void *parameter, u32 para_len, struct pm8001_tmf_task *tmf)
 680{
 681        int res, retry;
 682        struct sas_task *task = NULL;
 683        struct pm8001_hba_info *pm8001_ha = pm8001_find_ha_by_dev(dev);
 684
 685        for (retry = 0; retry < 3; retry++) {
 686                task = sas_alloc_task(GFP_KERNEL);
 687                if (!task)
 688                        return -ENOMEM;
 689
 690                task->dev = dev;
 691                task->task_proto = dev->tproto;
 692                memcpy(&task->ssp_task, parameter, para_len);
 693                task->task_done = pm8001_task_done;
 694                task->timer.data = (unsigned long)task;
 695                task->timer.function = pm8001_tmf_timedout;
 696                task->timer.expires = jiffies + PM8001_TASK_TIMEOUT*HZ;
 697                add_timer(&task->timer);
 698
 699                res = pm8001_task_exec(task, 1, GFP_KERNEL, 1, tmf);
 700
 701                if (res) {
 702                        del_timer(&task->timer);
 703                        PM8001_FAIL_DBG(pm8001_ha,
 704                                pm8001_printk("Executing internal task "
 705                                "failed\n"));
 706                        goto ex_err;
 707                }
 708                wait_for_completion(&task->completion);
 709                res = -TMF_RESP_FUNC_FAILED;
 710                /* Even TMF timed out, return direct. */
 711                if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) {
 712                        if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) {
 713                                PM8001_FAIL_DBG(pm8001_ha,
 714                                        pm8001_printk("TMF task[%x]timeout.\n",
 715                                        tmf->tmf));
 716                                goto ex_err;
 717                        }
 718                }
 719
 720                if (task->task_status.resp == SAS_TASK_COMPLETE &&
 721                        task->task_status.stat == SAM_STAT_GOOD) {
 722                        res = TMF_RESP_FUNC_COMPLETE;
 723                        break;
 724                }
 725
 726                if (task->task_status.resp == SAS_TASK_COMPLETE &&
 727                task->task_status.stat == SAS_DATA_UNDERRUN) {
 728                        /* no error, but return the number of bytes of
 729                        * underrun */
 730                        res = task->task_status.residual;
 731                        break;
 732                }
 733
 734                if (task->task_status.resp == SAS_TASK_COMPLETE &&
 735                        task->task_status.stat == SAS_DATA_OVERRUN) {
 736                        PM8001_FAIL_DBG(pm8001_ha,
 737                                pm8001_printk("Blocked task error.\n"));
 738                        res = -EMSGSIZE;
 739                        break;
 740                } else {
 741                        PM8001_EH_DBG(pm8001_ha,
 742                                pm8001_printk(" Task to dev %016llx response:"
 743                                "0x%x status 0x%x\n",
 744                                SAS_ADDR(dev->sas_addr),
 745                                task->task_status.resp,
 746                                task->task_status.stat));
 747                        sas_free_task(task);
 748                        task = NULL;
 749                }
 750        }
 751ex_err:
 752        BUG_ON(retry == 3 && task != NULL);
 753        sas_free_task(task);
 754        return res;
 755}
 756
 757static int
 758pm8001_exec_internal_task_abort(struct pm8001_hba_info *pm8001_ha,
 759        struct pm8001_device *pm8001_dev, struct domain_device *dev, u32 flag,
 760        u32 task_tag)
 761{
 762        int res, retry;
 763        u32 ccb_tag;
 764        struct pm8001_ccb_info *ccb;
 765        struct sas_task *task = NULL;
 766
 767        for (retry = 0; retry < 3; retry++) {
 768                task = sas_alloc_task(GFP_KERNEL);
 769                if (!task)
 770                        return -ENOMEM;
 771
 772                task->dev = dev;
 773                task->task_proto = dev->tproto;
 774                task->task_done = pm8001_task_done;
 775                task->timer.data = (unsigned long)task;
 776                task->timer.function = pm8001_tmf_timedout;
 777                task->timer.expires = jiffies + PM8001_TASK_TIMEOUT * HZ;
 778                add_timer(&task->timer);
 779
 780                res = pm8001_tag_alloc(pm8001_ha, &ccb_tag);
 781                if (res)
 782                        return res;
 783                ccb = &pm8001_ha->ccb_info[ccb_tag];
 784                ccb->device = pm8001_dev;
 785                ccb->ccb_tag = ccb_tag;
 786                ccb->task = task;
 787
 788                res = PM8001_CHIP_DISP->task_abort(pm8001_ha,
 789                        pm8001_dev, flag, task_tag, ccb_tag);
 790
 791                if (res) {
 792                        del_timer(&task->timer);
 793                        PM8001_FAIL_DBG(pm8001_ha,
 794                                pm8001_printk("Executing internal task "
 795                                "failed\n"));
 796                        goto ex_err;
 797                }
 798                wait_for_completion(&task->completion);
 799                res = TMF_RESP_FUNC_FAILED;
 800                /* Even TMF timed out, return direct. */
 801                if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) {
 802                        if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) {
 803                                PM8001_FAIL_DBG(pm8001_ha,
 804                                        pm8001_printk("TMF task timeout.\n"));
 805                                goto ex_err;
 806                        }
 807                }
 808
 809                if (task->task_status.resp == SAS_TASK_COMPLETE &&
 810                        task->task_status.stat == SAM_STAT_GOOD) {
 811                        res = TMF_RESP_FUNC_COMPLETE;
 812                        break;
 813
 814                } else {
 815                        PM8001_EH_DBG(pm8001_ha,
 816                                pm8001_printk(" Task to dev %016llx response: "
 817                                        "0x%x status 0x%x\n",
 818                                SAS_ADDR(dev->sas_addr),
 819                                task->task_status.resp,
 820                                task->task_status.stat));
 821                        sas_free_task(task);
 822                        task = NULL;
 823                }
 824        }
 825ex_err:
 826        BUG_ON(retry == 3 && task != NULL);
 827        sas_free_task(task);
 828        return res;
 829}
 830
 831/**
 832  * pm8001_dev_gone_notify - see the comments for "pm8001_dev_found_notify"
 833  * @dev: the device structure which sas layer used.
 834  */
 835static void pm8001_dev_gone_notify(struct domain_device *dev)
 836{
 837        unsigned long flags = 0;
 838        u32 tag;
 839        struct pm8001_hba_info *pm8001_ha;
 840        struct pm8001_device *pm8001_dev = dev->lldd_dev;
 841
 842        pm8001_ha = pm8001_find_ha_by_dev(dev);
 843        spin_lock_irqsave(&pm8001_ha->lock, flags);
 844        pm8001_tag_alloc(pm8001_ha, &tag);
 845        if (pm8001_dev) {
 846                u32 device_id = pm8001_dev->device_id;
 847
 848                PM8001_DISC_DBG(pm8001_ha,
 849                        pm8001_printk("found dev[%d:%x] is gone.\n",
 850                        pm8001_dev->device_id, pm8001_dev->dev_type));
 851                if (pm8001_dev->running_req) {
 852                        spin_unlock_irqrestore(&pm8001_ha->lock, flags);
 853                        pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev ,
 854                                dev, 1, 0);
 855                        spin_lock_irqsave(&pm8001_ha->lock, flags);
 856                }
 857                PM8001_CHIP_DISP->dereg_dev_req(pm8001_ha, device_id);
 858                pm8001_free_dev(pm8001_dev);
 859        } else {
 860                PM8001_DISC_DBG(pm8001_ha,
 861                        pm8001_printk("Found dev has gone.\n"));
 862        }
 863        dev->lldd_dev = NULL;
 864        spin_unlock_irqrestore(&pm8001_ha->lock, flags);
 865}
 866
 867void pm8001_dev_gone(struct domain_device *dev)
 868{
 869        pm8001_dev_gone_notify(dev);
 870}
 871
 872static int pm8001_issue_ssp_tmf(struct domain_device *dev,
 873        u8 *lun, struct pm8001_tmf_task *tmf)
 874{
 875        struct sas_ssp_task ssp_task;
 876        if (!(dev->tproto & SAS_PROTOCOL_SSP))
 877                return TMF_RESP_FUNC_ESUPP;
 878
 879        strncpy((u8 *)&ssp_task.LUN, lun, 8);
 880        return pm8001_exec_internal_tmf_task(dev, &ssp_task, sizeof(ssp_task),
 881                tmf);
 882}
 883
 884/* retry commands by ha, by task and/or by device */
 885void pm8001_open_reject_retry(
 886        struct pm8001_hba_info *pm8001_ha,
 887        struct sas_task *task_to_close,
 888        struct pm8001_device *device_to_close)
 889{
 890        int i;
 891        unsigned long flags;
 892
 893        if (pm8001_ha == NULL)
 894                return;
 895
 896        spin_lock_irqsave(&pm8001_ha->lock, flags);
 897
 898        for (i = 0; i < PM8001_MAX_CCB; i++) {
 899                struct sas_task *task;
 900                struct task_status_struct *ts;
 901                struct pm8001_device *pm8001_dev;
 902                unsigned long flags1;
 903                u32 tag;
 904                struct pm8001_ccb_info *ccb = &pm8001_ha->ccb_info[i];
 905
 906                pm8001_dev = ccb->device;
 907                if (!pm8001_dev || (pm8001_dev->dev_type == NO_DEVICE))
 908                        continue;
 909                if (!device_to_close) {
 910                        uintptr_t d = (uintptr_t)pm8001_dev
 911                                        - (uintptr_t)&pm8001_ha->devices;
 912                        if (((d % sizeof(*pm8001_dev)) != 0)
 913                         || ((d / sizeof(*pm8001_dev)) >= PM8001_MAX_DEVICES))
 914                                continue;
 915                } else if (pm8001_dev != device_to_close)
 916                        continue;
 917                tag = ccb->ccb_tag;
 918                if (!tag || (tag == 0xFFFFFFFF))
 919                        continue;
 920                task = ccb->task;
 921                if (!task || !task->task_done)
 922                        continue;
 923                if (task_to_close && (task != task_to_close))
 924                        continue;
 925                ts = &task->task_status;
 926                ts->resp = SAS_TASK_COMPLETE;
 927                /* Force the midlayer to retry */
 928                ts->stat = SAS_OPEN_REJECT;
 929                ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
 930                if (pm8001_dev)
 931                        pm8001_dev->running_req--;
 932                spin_lock_irqsave(&task->task_state_lock, flags1);
 933                task->task_state_flags &= ~SAS_TASK_STATE_PENDING;
 934                task->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
 935                task->task_state_flags |= SAS_TASK_STATE_DONE;
 936                if (unlikely((task->task_state_flags
 937                                & SAS_TASK_STATE_ABORTED))) {
 938                        spin_unlock_irqrestore(&task->task_state_lock,
 939                                flags1);
 940                        pm8001_ccb_task_free(pm8001_ha, task, ccb, tag);
 941                } else {
 942                        spin_unlock_irqrestore(&task->task_state_lock,
 943                                flags1);
 944                        pm8001_ccb_task_free(pm8001_ha, task, ccb, tag);
 945                        mb();/* in order to force CPU ordering */
 946                        spin_unlock_irqrestore(&pm8001_ha->lock, flags);
 947                        task->task_done(task);
 948                        spin_lock_irqsave(&pm8001_ha->lock, flags);
 949                }
 950        }
 951
 952        spin_unlock_irqrestore(&pm8001_ha->lock, flags);
 953}
 954
 955/**
 956  * Standard mandates link reset for ATA  (type 0) and hard reset for
 957  * SSP (type 1) , only for RECOVERY
 958  */
 959int pm8001_I_T_nexus_reset(struct domain_device *dev)
 960{
 961        int rc = TMF_RESP_FUNC_FAILED;
 962        struct pm8001_device *pm8001_dev;
 963        struct pm8001_hba_info *pm8001_ha;
 964        struct sas_phy *phy;
 965        if (!dev || !dev->lldd_dev)
 966                return -1;
 967
 968        pm8001_dev = dev->lldd_dev;
 969        pm8001_ha = pm8001_find_ha_by_dev(dev);
 970        phy = sas_get_local_phy(dev);
 971
 972        if (dev_is_sata(dev)) {
 973                DECLARE_COMPLETION_ONSTACK(completion_setstate);
 974                if (scsi_is_sas_phy_local(phy)) {
 975                        rc = 0;
 976                        goto out;
 977                }
 978                rc = sas_phy_reset(phy, 1);
 979                msleep(2000);
 980                rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev ,
 981                        dev, 1, 0);
 982                pm8001_dev->setds_completion = &completion_setstate;
 983                rc = PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha,
 984                        pm8001_dev, 0x01);
 985                wait_for_completion(&completion_setstate);
 986        } else {
 987                rc = sas_phy_reset(phy, 1);
 988                msleep(2000);
 989        }
 990        PM8001_EH_DBG(pm8001_ha, pm8001_printk(" for device[%x]:rc=%d\n",
 991                pm8001_dev->device_id, rc));
 992 out:
 993        sas_put_local_phy(phy);
 994        return rc;
 995}
 996
 997/* mandatory SAM-3, the task reset the specified LUN*/
 998int pm8001_lu_reset(struct domain_device *dev, u8 *lun)
 999{
1000        int rc = TMF_RESP_FUNC_FAILED;
1001        struct pm8001_tmf_task tmf_task;
1002        struct pm8001_device *pm8001_dev = dev->lldd_dev;
1003        struct pm8001_hba_info *pm8001_ha = pm8001_find_ha_by_dev(dev);
1004        if (dev_is_sata(dev)) {
1005                struct sas_phy *phy = sas_get_local_phy(dev);
1006                rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev ,
1007                        dev, 1, 0);
1008                rc = sas_phy_reset(phy, 1);
1009                sas_put_local_phy(phy);
1010                rc = PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha,
1011                        pm8001_dev, 0x01);
1012                msleep(2000);
1013        } else {
1014                tmf_task.tmf = TMF_LU_RESET;
1015                rc = pm8001_issue_ssp_tmf(dev, lun, &tmf_task);
1016        }
1017        /* If failed, fall-through I_T_Nexus reset */
1018        PM8001_EH_DBG(pm8001_ha, pm8001_printk("for device[%x]:rc=%d\n",
1019                pm8001_dev->device_id, rc));
1020        return rc;
1021}
1022
1023/* optional SAM-3 */
1024int pm8001_query_task(struct sas_task *task)
1025{
1026        u32 tag = 0xdeadbeef;
1027        int i = 0;
1028        struct scsi_lun lun;
1029        struct pm8001_tmf_task tmf_task;
1030        int rc = TMF_RESP_FUNC_FAILED;
1031        if (unlikely(!task || !task->lldd_task || !task->dev))
1032                return rc;
1033
1034        if (task->task_proto & SAS_PROTOCOL_SSP) {
1035                struct scsi_cmnd *cmnd = task->uldd_task;
1036                struct domain_device *dev = task->dev;
1037                struct pm8001_hba_info *pm8001_ha =
1038                        pm8001_find_ha_by_dev(dev);
1039
1040                int_to_scsilun(cmnd->device->lun, &lun);
1041                rc = pm8001_find_tag(task, &tag);
1042                if (rc == 0) {
1043                        rc = TMF_RESP_FUNC_FAILED;
1044                        return rc;
1045                }
1046                PM8001_EH_DBG(pm8001_ha, pm8001_printk("Query:["));
1047                for (i = 0; i < 16; i++)
1048                        printk(KERN_INFO "%02x ", cmnd->cmnd[i]);
1049                printk(KERN_INFO "]\n");
1050                tmf_task.tmf =  TMF_QUERY_TASK;
1051                tmf_task.tag_of_task_to_be_managed = tag;
1052
1053                rc = pm8001_issue_ssp_tmf(dev, lun.scsi_lun, &tmf_task);
1054                switch (rc) {
1055                /* The task is still in Lun, release it then */
1056                case TMF_RESP_FUNC_SUCC:
1057                        PM8001_EH_DBG(pm8001_ha,
1058                                pm8001_printk("The task is still in Lun\n"));
1059                        break;
1060                /* The task is not in Lun or failed, reset the phy */
1061                case TMF_RESP_FUNC_FAILED:
1062                case TMF_RESP_FUNC_COMPLETE:
1063                        PM8001_EH_DBG(pm8001_ha,
1064                        pm8001_printk("The task is not in Lun or failed,"
1065                        " reset the phy\n"));
1066                        break;
1067                }
1068        }
1069        pm8001_printk(":rc= %d\n", rc);
1070        return rc;
1071}
1072
1073/*  mandatory SAM-3, still need free task/ccb info, abord the specified task */
1074int pm8001_abort_task(struct sas_task *task)
1075{
1076        unsigned long flags;
1077        u32 tag = 0xdeadbeef;
1078        u32 device_id;
1079        struct domain_device *dev ;
1080        struct pm8001_hba_info *pm8001_ha = NULL;
1081        struct pm8001_ccb_info *ccb;
1082        struct scsi_lun lun;
1083        struct pm8001_device *pm8001_dev;
1084        struct pm8001_tmf_task tmf_task;
1085        int rc = TMF_RESP_FUNC_FAILED;
1086        if (unlikely(!task || !task->lldd_task || !task->dev))
1087                return rc;
1088        spin_lock_irqsave(&task->task_state_lock, flags);
1089        if (task->task_state_flags & SAS_TASK_STATE_DONE) {
1090                spin_unlock_irqrestore(&task->task_state_lock, flags);
1091                rc = TMF_RESP_FUNC_COMPLETE;
1092                goto out;
1093        }
1094        spin_unlock_irqrestore(&task->task_state_lock, flags);
1095        if (task->task_proto & SAS_PROTOCOL_SSP) {
1096                struct scsi_cmnd *cmnd = task->uldd_task;
1097                dev = task->dev;
1098                ccb = task->lldd_task;
1099                pm8001_dev = dev->lldd_dev;
1100                pm8001_ha = pm8001_find_ha_by_dev(dev);
1101                int_to_scsilun(cmnd->device->lun, &lun);
1102                rc = pm8001_find_tag(task, &tag);
1103                if (rc == 0) {
1104                        printk(KERN_INFO "No such tag in %s\n", __func__);
1105                        rc = TMF_RESP_FUNC_FAILED;
1106                        return rc;
1107                }
1108                device_id = pm8001_dev->device_id;
1109                PM8001_EH_DBG(pm8001_ha,
1110                        pm8001_printk("abort io to deviceid= %d\n", device_id));
1111                tmf_task.tmf = TMF_ABORT_TASK;
1112                tmf_task.tag_of_task_to_be_managed = tag;
1113                rc = pm8001_issue_ssp_tmf(dev, lun.scsi_lun, &tmf_task);
1114                pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev,
1115                        pm8001_dev->sas_device, 0, tag);
1116        } else if (task->task_proto & SAS_PROTOCOL_SATA ||
1117                task->task_proto & SAS_PROTOCOL_STP) {
1118                dev = task->dev;
1119                pm8001_dev = dev->lldd_dev;
1120                pm8001_ha = pm8001_find_ha_by_dev(dev);
1121                rc = pm8001_find_tag(task, &tag);
1122                if (rc == 0) {
1123                        printk(KERN_INFO "No such tag in %s\n", __func__);
1124                        rc = TMF_RESP_FUNC_FAILED;
1125                        return rc;
1126                }
1127                rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev,
1128                        pm8001_dev->sas_device, 0, tag);
1129        } else if (task->task_proto & SAS_PROTOCOL_SMP) {
1130                /* SMP */
1131                dev = task->dev;
1132                pm8001_dev = dev->lldd_dev;
1133                pm8001_ha = pm8001_find_ha_by_dev(dev);
1134                rc = pm8001_find_tag(task, &tag);
1135                if (rc == 0) {
1136                        printk(KERN_INFO "No such tag in %s\n", __func__);
1137                        rc = TMF_RESP_FUNC_FAILED;
1138                        return rc;
1139                }
1140                rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev,
1141                        pm8001_dev->sas_device, 0, tag);
1142
1143        }
1144out:
1145        if (rc != TMF_RESP_FUNC_COMPLETE)
1146                pm8001_printk("rc= %d\n", rc);
1147        return rc;
1148}
1149
1150int pm8001_abort_task_set(struct domain_device *dev, u8 *lun)
1151{
1152        int rc = TMF_RESP_FUNC_FAILED;
1153        struct pm8001_tmf_task tmf_task;
1154
1155        tmf_task.tmf = TMF_ABORT_TASK_SET;
1156        rc = pm8001_issue_ssp_tmf(dev, lun, &tmf_task);
1157        return rc;
1158}
1159
1160int pm8001_clear_aca(struct domain_device *dev, u8 *lun)
1161{
1162        int rc = TMF_RESP_FUNC_FAILED;
1163        struct pm8001_tmf_task tmf_task;
1164
1165        tmf_task.tmf = TMF_CLEAR_ACA;
1166        rc = pm8001_issue_ssp_tmf(dev, lun, &tmf_task);
1167
1168        return rc;
1169}
1170
1171int pm8001_clear_task_set(struct domain_device *dev, u8 *lun)
1172{
1173        int rc = TMF_RESP_FUNC_FAILED;
1174        struct pm8001_tmf_task tmf_task;
1175        struct pm8001_device *pm8001_dev = dev->lldd_dev;
1176        struct pm8001_hba_info *pm8001_ha = pm8001_find_ha_by_dev(dev);
1177
1178        PM8001_EH_DBG(pm8001_ha,
1179                pm8001_printk("I_T_L_Q clear task set[%x]\n",
1180                pm8001_dev->device_id));
1181        tmf_task.tmf = TMF_CLEAR_TASK_SET;
1182        rc = pm8001_issue_ssp_tmf(dev, lun, &tmf_task);
1183        return rc;
1184}
1185
1186