linux/drivers/usb/serial/iuu_phoenix.c
<<
>>
Prefs
   1/*
   2 * Infinity Unlimited USB Phoenix driver
   3 *
   4 * Copyright (C) 2010 James Courtier-Dutton (James@superbug.co.uk)
   5
   6 * Copyright (C) 2007 Alain Degreffe (eczema@ecze.com)
   7 *
   8 * Original code taken from iuutool (Copyright (C) 2006 Juan Carlos Borrás)
   9 *
  10 *      This program is free software; you can redistribute it and/or modify
  11 *      it under the terms of the GNU General Public License as published by
  12 *      the Free Software Foundation; either version 2 of the License, or
  13 *      (at your option) any later version.
  14 *
  15 *  And tested with help of WB Electronics
  16 *
  17 */
  18#include <linux/kernel.h>
  19#include <linux/errno.h>
  20#include <linux/init.h>
  21#include <linux/slab.h>
  22#include <linux/tty.h>
  23#include <linux/tty_driver.h>
  24#include <linux/tty_flip.h>
  25#include <linux/serial.h>
  26#include <linux/module.h>
  27#include <linux/moduleparam.h>
  28#include <linux/spinlock.h>
  29#include <linux/uaccess.h>
  30#include <linux/usb.h>
  31#include <linux/usb/serial.h>
  32#include "iuu_phoenix.h"
  33#include <linux/random.h>
  34
  35
  36#ifdef CONFIG_USB_SERIAL_DEBUG
  37static bool debug = 1;
  38#else
  39static bool debug;
  40#endif
  41
  42/*
  43 * Version Information
  44 */
  45#define DRIVER_VERSION "v0.12"
  46#define DRIVER_DESC "Infinity USB Unlimited Phoenix driver"
  47
  48static const struct usb_device_id id_table[] = {
  49        {USB_DEVICE(IUU_USB_VENDOR_ID, IUU_USB_PRODUCT_ID)},
  50        {}                      /* Terminating entry */
  51};
  52MODULE_DEVICE_TABLE(usb, id_table);
  53
  54static struct usb_driver iuu_driver = {
  55        .name = "iuu_phoenix",
  56        .probe = usb_serial_probe,
  57        .disconnect = usb_serial_disconnect,
  58        .id_table = id_table,
  59};
  60
  61/* turbo parameter */
  62static int boost = 100;
  63static int clockmode = 1;
  64static int cdmode = 1;
  65static int iuu_cardin;
  66static int iuu_cardout;
  67static bool xmas;
  68static int vcc_default = 5;
  69
  70static void read_rxcmd_callback(struct urb *urb);
  71
  72struct iuu_private {
  73        spinlock_t lock;        /* store irq state */
  74        wait_queue_head_t delta_msr_wait;
  75        u8 line_status;
  76        int tiostatus;          /* store IUART SIGNAL for tiocmget call */
  77        u8 reset;               /* if 1 reset is needed */
  78        int poll;               /* number of poll */
  79        u8 *writebuf;           /* buffer for writing to device */
  80        int writelen;           /* num of byte to write to device */
  81        u8 *buf;                /* used for initialize speed */
  82        u8 *dbgbuf;             /* debug buffer */
  83        u8 len;
  84        int vcc;                /* vcc (either 3 or 5 V) */
  85        u32 baud;
  86        u32 boost;
  87        u32 clk;
  88};
  89
  90
  91static void iuu_free_buf(struct iuu_private *priv)
  92{
  93        kfree(priv->buf);
  94        kfree(priv->dbgbuf);
  95        kfree(priv->writebuf);
  96}
  97
  98static int iuu_alloc_buf(struct iuu_private *priv)
  99{
 100        priv->buf = kzalloc(256, GFP_KERNEL);
 101        priv->dbgbuf = kzalloc(256, GFP_KERNEL);
 102        priv->writebuf = kzalloc(256, GFP_KERNEL);
 103        if (!priv->buf || !priv->dbgbuf || !priv->writebuf) {
 104                iuu_free_buf(priv);
 105                dbg("%s problem allocation buffer", __func__);
 106                return -ENOMEM;
 107        }
 108        dbg("%s - Privates buffers allocation success", __func__);
 109        return 0;
 110}
 111
 112static int iuu_startup(struct usb_serial *serial)
 113{
 114        struct iuu_private *priv;
 115        priv = kzalloc(sizeof(struct iuu_private), GFP_KERNEL);
 116        dbg("%s- priv allocation success", __func__);
 117        if (!priv)
 118                return -ENOMEM;
 119        if (iuu_alloc_buf(priv)) {
 120                kfree(priv);
 121                return -ENOMEM;
 122        }
 123        priv->vcc = vcc_default;
 124        spin_lock_init(&priv->lock);
 125        init_waitqueue_head(&priv->delta_msr_wait);
 126        usb_set_serial_port_data(serial->port[0], priv);
 127        return 0;
 128}
 129
 130/* Release function */
 131static void iuu_release(struct usb_serial *serial)
 132{
 133        struct usb_serial_port *port = serial->port[0];
 134        struct iuu_private *priv = usb_get_serial_port_data(port);
 135        if (!port)
 136                return;
 137
 138        dbg("%s", __func__);
 139
 140        if (priv) {
 141                iuu_free_buf(priv);
 142                dbg("%s - I will free all", __func__);
 143                usb_set_serial_port_data(port, NULL);
 144
 145                dbg("%s - priv is not anymore in port structure", __func__);
 146                kfree(priv);
 147
 148                dbg("%s priv is now kfree", __func__);
 149        }
 150}
 151
 152static int iuu_tiocmset(struct tty_struct *tty,
 153                        unsigned int set, unsigned int clear)
 154{
 155        struct usb_serial_port *port = tty->driver_data;
 156        struct iuu_private *priv = usb_get_serial_port_data(port);
 157        unsigned long flags;
 158
 159        /* FIXME: locking on tiomstatus */
 160        dbg("%s (%d) msg : SET = 0x%04x, CLEAR = 0x%04x ", __func__,
 161            port->number, set, clear);
 162
 163        spin_lock_irqsave(&priv->lock, flags);
 164
 165        if ((set & TIOCM_RTS) && !(priv->tiostatus == TIOCM_RTS)) {
 166                dbg("%s TIOCMSET RESET called !!!", __func__);
 167                priv->reset = 1;
 168        }
 169        if (set & TIOCM_RTS)
 170                priv->tiostatus = TIOCM_RTS;
 171
 172        spin_unlock_irqrestore(&priv->lock, flags);
 173        return 0;
 174}
 175
 176/* This is used to provide a carrier detect mechanism
 177 * When a card is present, the response is 0x00
 178 * When no card , the reader respond with TIOCM_CD
 179 * This is known as CD autodetect mechanism
 180 */
 181static int iuu_tiocmget(struct tty_struct *tty)
 182{
 183        struct usb_serial_port *port = tty->driver_data;
 184        struct iuu_private *priv = usb_get_serial_port_data(port);
 185        unsigned long flags;
 186        int rc;
 187
 188        spin_lock_irqsave(&priv->lock, flags);
 189        rc = priv->tiostatus;
 190        spin_unlock_irqrestore(&priv->lock, flags);
 191
 192        return rc;
 193}
 194
 195static void iuu_rxcmd(struct urb *urb)
 196{
 197        struct usb_serial_port *port = urb->context;
 198        int result;
 199        int status = urb->status;
 200
 201        dbg("%s - enter", __func__);
 202
 203        if (status) {
 204                dbg("%s - status = %d", __func__, status);
 205                /* error stop all */
 206                return;
 207        }
 208
 209
 210        memset(port->write_urb->transfer_buffer, IUU_UART_RX, 1);
 211        usb_fill_bulk_urb(port->write_urb, port->serial->dev,
 212                          usb_sndbulkpipe(port->serial->dev,
 213                                          port->bulk_out_endpointAddress),
 214                          port->write_urb->transfer_buffer, 1,
 215                          read_rxcmd_callback, port);
 216        result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
 217}
 218
 219static int iuu_reset(struct usb_serial_port *port, u8 wt)
 220{
 221        struct iuu_private *priv = usb_get_serial_port_data(port);
 222        int result;
 223        char *buf_ptr = port->write_urb->transfer_buffer;
 224        dbg("%s - enter", __func__);
 225
 226        /* Prepare the reset sequence */
 227
 228        *buf_ptr++ = IUU_RST_SET;
 229        *buf_ptr++ = IUU_DELAY_MS;
 230        *buf_ptr++ = wt;
 231        *buf_ptr = IUU_RST_CLEAR;
 232
 233        /* send the sequence */
 234
 235        usb_fill_bulk_urb(port->write_urb,
 236                          port->serial->dev,
 237                          usb_sndbulkpipe(port->serial->dev,
 238                                          port->bulk_out_endpointAddress),
 239                          port->write_urb->transfer_buffer, 4, iuu_rxcmd, port);
 240        result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
 241        priv->reset = 0;
 242        return result;
 243}
 244
 245/* Status Function
 246 * Return value is
 247 * 0x00 = no card
 248 * 0x01 = smartcard
 249 * 0x02 = sim card
 250 */
 251static void iuu_update_status_callback(struct urb *urb)
 252{
 253        struct usb_serial_port *port = urb->context;
 254        struct iuu_private *priv = usb_get_serial_port_data(port);
 255        u8 *st;
 256        int status = urb->status;
 257
 258        dbg("%s - enter", __func__);
 259
 260        if (status) {
 261                dbg("%s - status = %d", __func__, status);
 262                /* error stop all */
 263                return;
 264        }
 265
 266        st = urb->transfer_buffer;
 267        dbg("%s - enter", __func__);
 268        if (urb->actual_length == 1) {
 269                switch (st[0]) {
 270                case 0x1:
 271                        priv->tiostatus = iuu_cardout;
 272                        break;
 273                case 0x0:
 274                        priv->tiostatus = iuu_cardin;
 275                        break;
 276                default:
 277                        priv->tiostatus = iuu_cardin;
 278                }
 279        }
 280        iuu_rxcmd(urb);
 281}
 282
 283static void iuu_status_callback(struct urb *urb)
 284{
 285        struct usb_serial_port *port = urb->context;
 286        int result;
 287        int status = urb->status;
 288
 289        dbg("%s - status = %d", __func__, status);
 290        usb_fill_bulk_urb(port->read_urb, port->serial->dev,
 291                          usb_rcvbulkpipe(port->serial->dev,
 292                                          port->bulk_in_endpointAddress),
 293                          port->read_urb->transfer_buffer, 256,
 294                          iuu_update_status_callback, port);
 295        result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
 296}
 297
 298static int iuu_status(struct usb_serial_port *port)
 299{
 300        int result;
 301
 302        dbg("%s - enter", __func__);
 303
 304        memset(port->write_urb->transfer_buffer, IUU_GET_STATE_REGISTER, 1);
 305        usb_fill_bulk_urb(port->write_urb, port->serial->dev,
 306                          usb_sndbulkpipe(port->serial->dev,
 307                                          port->bulk_out_endpointAddress),
 308                          port->write_urb->transfer_buffer, 1,
 309                          iuu_status_callback, port);
 310        result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
 311        return result;
 312
 313}
 314
 315static int bulk_immediate(struct usb_serial_port *port, u8 *buf, u8 count)
 316{
 317        int status;
 318        struct usb_serial *serial = port->serial;
 319        int actual = 0;
 320
 321        dbg("%s - enter", __func__);
 322
 323        /* send the data out the bulk port */
 324
 325        status =
 326            usb_bulk_msg(serial->dev,
 327                         usb_sndbulkpipe(serial->dev,
 328                                         port->bulk_out_endpointAddress), buf,
 329                         count, &actual, HZ * 1);
 330
 331        if (status != IUU_OPERATION_OK)
 332                dbg("%s - error = %2x", __func__, status);
 333        else
 334                dbg("%s - write OK !", __func__);
 335        return status;
 336}
 337
 338static int read_immediate(struct usb_serial_port *port, u8 *buf, u8 count)
 339{
 340        int status;
 341        struct usb_serial *serial = port->serial;
 342        int actual = 0;
 343
 344        dbg("%s - enter", __func__);
 345
 346        /* send the data out the bulk port */
 347
 348        status =
 349            usb_bulk_msg(serial->dev,
 350                         usb_rcvbulkpipe(serial->dev,
 351                                         port->bulk_in_endpointAddress), buf,
 352                         count, &actual, HZ * 1);
 353
 354        if (status != IUU_OPERATION_OK)
 355                dbg("%s - error = %2x", __func__, status);
 356        else
 357                dbg("%s - read OK !", __func__);
 358        return status;
 359}
 360
 361static int iuu_led(struct usb_serial_port *port, unsigned int R,
 362                   unsigned int G, unsigned int B, u8 f)
 363{
 364        int status;
 365        u8 *buf;
 366        buf = kmalloc(8, GFP_KERNEL);
 367        if (!buf)
 368                return -ENOMEM;
 369
 370        dbg("%s - enter", __func__);
 371
 372        buf[0] = IUU_SET_LED;
 373        buf[1] = R & 0xFF;
 374        buf[2] = (R >> 8) & 0xFF;
 375        buf[3] = G & 0xFF;
 376        buf[4] = (G >> 8) & 0xFF;
 377        buf[5] = B & 0xFF;
 378        buf[6] = (B >> 8) & 0xFF;
 379        buf[7] = f;
 380        status = bulk_immediate(port, buf, 8);
 381        kfree(buf);
 382        if (status != IUU_OPERATION_OK)
 383                dbg("%s - led error status = %2x", __func__, status);
 384        else
 385                dbg("%s - led OK !", __func__);
 386        return IUU_OPERATION_OK;
 387}
 388
 389static void iuu_rgbf_fill_buffer(u8 *buf, u8 r1, u8 r2, u8 g1, u8 g2, u8 b1,
 390                                 u8 b2, u8 freq)
 391{
 392        *buf++ = IUU_SET_LED;
 393        *buf++ = r1;
 394        *buf++ = r2;
 395        *buf++ = g1;
 396        *buf++ = g2;
 397        *buf++ = b1;
 398        *buf++ = b2;
 399        *buf = freq;
 400}
 401
 402static void iuu_led_activity_on(struct urb *urb)
 403{
 404        struct usb_serial_port *port = urb->context;
 405        int result;
 406        char *buf_ptr = port->write_urb->transfer_buffer;
 407        *buf_ptr++ = IUU_SET_LED;
 408        if (xmas == 1) {
 409                get_random_bytes(buf_ptr, 6);
 410                *(buf_ptr+7) = 1;
 411        } else {
 412                iuu_rgbf_fill_buffer(buf_ptr, 255, 255, 0, 0, 0, 0, 255);
 413        }
 414
 415        usb_fill_bulk_urb(port->write_urb, port->serial->dev,
 416                          usb_sndbulkpipe(port->serial->dev,
 417                                          port->bulk_out_endpointAddress),
 418                          port->write_urb->transfer_buffer, 8 ,
 419                          iuu_rxcmd, port);
 420        result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
 421}
 422
 423static void iuu_led_activity_off(struct urb *urb)
 424{
 425        struct usb_serial_port *port = urb->context;
 426        int result;
 427        char *buf_ptr = port->write_urb->transfer_buffer;
 428        if (xmas == 1) {
 429                iuu_rxcmd(urb);
 430                return;
 431        } else {
 432                *buf_ptr++ = IUU_SET_LED;
 433                iuu_rgbf_fill_buffer(buf_ptr, 0, 0, 255, 255, 0, 0, 255);
 434        }
 435        usb_fill_bulk_urb(port->write_urb, port->serial->dev,
 436                          usb_sndbulkpipe(port->serial->dev,
 437                                          port->bulk_out_endpointAddress),
 438                          port->write_urb->transfer_buffer, 8 ,
 439                          iuu_rxcmd, port);
 440        result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
 441}
 442
 443
 444
 445static int iuu_clk(struct usb_serial_port *port, int dwFrq)
 446{
 447        int status;
 448        struct iuu_private *priv = usb_get_serial_port_data(port);
 449        int Count = 0;
 450        u8 FrqGenAdr = 0x69;
 451        u8 DIV = 0;             /* 8bit */
 452        u8 XDRV = 0;            /* 8bit */
 453        u8 PUMP = 0;            /* 3bit */
 454        u8 PBmsb = 0;           /* 2bit */
 455        u8 PBlsb = 0;           /* 8bit */
 456        u8 PO = 0;              /* 1bit */
 457        u8 Q = 0;               /* 7bit */
 458        /* 24bit = 3bytes */
 459        unsigned int P = 0;
 460        unsigned int P2 = 0;
 461        int frq = (int)dwFrq;
 462
 463        dbg("%s - enter", __func__);
 464
 465        if (frq == 0) {
 466                priv->buf[Count++] = IUU_UART_WRITE_I2C;
 467                priv->buf[Count++] = FrqGenAdr << 1;
 468                priv->buf[Count++] = 0x09;
 469                priv->buf[Count++] = 0x00;
 470
 471                status = bulk_immediate(port, (u8 *) priv->buf, Count);
 472                if (status != 0) {
 473                        dbg("%s - write error ", __func__);
 474                        return status;
 475                }
 476        } else if (frq == 3579000) {
 477                DIV = 100;
 478                P = 1193;
 479                Q = 40;
 480                XDRV = 0;
 481        } else if (frq == 3680000) {
 482                DIV = 105;
 483                P = 161;
 484                Q = 5;
 485                XDRV = 0;
 486        } else if (frq == 6000000) {
 487                DIV = 66;
 488                P = 66;
 489                Q = 2;
 490                XDRV = 0x28;
 491        } else {
 492                unsigned int result = 0;
 493                unsigned int tmp = 0;
 494                unsigned int check;
 495                unsigned int check2;
 496                char found = 0x00;
 497                unsigned int lQ = 2;
 498                unsigned int lP = 2055;
 499                unsigned int lDiv = 4;
 500
 501                for (lQ = 2; lQ <= 47 && !found; lQ++)
 502                        for (lP = 2055; lP >= 8 && !found; lP--)
 503                                for (lDiv = 4; lDiv <= 127 && !found; lDiv++) {
 504                                        tmp = (12000000 / lDiv) * (lP / lQ);
 505                                        if (abs((int)(tmp - frq)) <
 506                                            abs((int)(frq - result))) {
 507                                                check2 = (12000000 / lQ);
 508                                                if (check2 < 250000)
 509                                                        continue;
 510                                                check = (12000000 / lQ) * lP;
 511                                                if (check > 400000000)
 512                                                        continue;
 513                                                if (check < 100000000)
 514                                                        continue;
 515                                                if (lDiv < 4 || lDiv > 127)
 516                                                        continue;
 517                                                result = tmp;
 518                                                P = lP;
 519                                                DIV = lDiv;
 520                                                Q = lQ;
 521                                                if (result == frq)
 522                                                        found = 0x01;
 523                                        }
 524                                }
 525        }
 526        P2 = ((P - PO) / 2) - 4;
 527        DIV = DIV;
 528        PUMP = 0x04;
 529        PBmsb = (P2 >> 8 & 0x03);
 530        PBlsb = P2 & 0xFF;
 531        PO = (P >> 10) & 0x01;
 532        Q = Q - 2;
 533
 534        priv->buf[Count++] = IUU_UART_WRITE_I2C;        /* 0x4C */
 535        priv->buf[Count++] = FrqGenAdr << 1;
 536        priv->buf[Count++] = 0x09;
 537        priv->buf[Count++] = 0x20;      /* Adr = 0x09 */
 538        priv->buf[Count++] = IUU_UART_WRITE_I2C;        /* 0x4C */
 539        priv->buf[Count++] = FrqGenAdr << 1;
 540        priv->buf[Count++] = 0x0C;
 541        priv->buf[Count++] = DIV;       /* Adr = 0x0C */
 542        priv->buf[Count++] = IUU_UART_WRITE_I2C;        /* 0x4C */
 543        priv->buf[Count++] = FrqGenAdr << 1;
 544        priv->buf[Count++] = 0x12;
 545        priv->buf[Count++] = XDRV;      /* Adr = 0x12 */
 546        priv->buf[Count++] = IUU_UART_WRITE_I2C;        /*  0x4C */
 547        priv->buf[Count++] = FrqGenAdr << 1;
 548        priv->buf[Count++] = 0x13;
 549        priv->buf[Count++] = 0x6B;      /* Adr = 0x13 */
 550        priv->buf[Count++] = IUU_UART_WRITE_I2C;        /*  0x4C */
 551        priv->buf[Count++] = FrqGenAdr << 1;
 552        priv->buf[Count++] = 0x40;
 553        priv->buf[Count++] = (0xC0 | ((PUMP & 0x07) << 2)) |
 554                             (PBmsb & 0x03);    /* Adr = 0x40 */
 555        priv->buf[Count++] = IUU_UART_WRITE_I2C;        /*  0x4C */
 556        priv->buf[Count++] = FrqGenAdr << 1;
 557        priv->buf[Count++] = 0x41;
 558        priv->buf[Count++] = PBlsb;     /* Adr = 0x41 */
 559        priv->buf[Count++] = IUU_UART_WRITE_I2C;        /*  0x4C */
 560        priv->buf[Count++] = FrqGenAdr << 1;
 561        priv->buf[Count++] = 0x42;
 562        priv->buf[Count++] = Q | (((PO & 0x01) << 7));  /* Adr = 0x42 */
 563        priv->buf[Count++] = IUU_UART_WRITE_I2C;        /*  0x4C */
 564        priv->buf[Count++] = FrqGenAdr << 1;
 565        priv->buf[Count++] = 0x44;
 566        priv->buf[Count++] = (char)0xFF;        /* Adr = 0x44 */
 567        priv->buf[Count++] = IUU_UART_WRITE_I2C;        /*  0x4C */
 568        priv->buf[Count++] = FrqGenAdr << 1;
 569        priv->buf[Count++] = 0x45;
 570        priv->buf[Count++] = (char)0xFE;        /* Adr = 0x45 */
 571        priv->buf[Count++] = IUU_UART_WRITE_I2C;        /*  0x4C */
 572        priv->buf[Count++] = FrqGenAdr << 1;
 573        priv->buf[Count++] = 0x46;
 574        priv->buf[Count++] = 0x7F;      /* Adr = 0x46 */
 575        priv->buf[Count++] = IUU_UART_WRITE_I2C;        /*  0x4C */
 576        priv->buf[Count++] = FrqGenAdr << 1;
 577        priv->buf[Count++] = 0x47;
 578        priv->buf[Count++] = (char)0x84;        /* Adr = 0x47 */
 579
 580        status = bulk_immediate(port, (u8 *) priv->buf, Count);
 581        if (status != IUU_OPERATION_OK)
 582                dbg("%s - write error ", __func__);
 583        return status;
 584}
 585
 586static int iuu_uart_flush(struct usb_serial_port *port)
 587{
 588        int i;
 589        int status;
 590        u8 rxcmd = IUU_UART_RX;
 591        struct iuu_private *priv = usb_get_serial_port_data(port);
 592
 593        dbg("%s - enter", __func__);
 594
 595        if (iuu_led(port, 0xF000, 0, 0, 0xFF) < 0)
 596                return -EIO;
 597
 598        for (i = 0; i < 2; i++) {
 599                status = bulk_immediate(port, &rxcmd, 1);
 600                if (status != IUU_OPERATION_OK) {
 601                        dbg("%s - uart_flush_write error", __func__);
 602                        return status;
 603                }
 604
 605                status = read_immediate(port, &priv->len, 1);
 606                if (status != IUU_OPERATION_OK) {
 607                        dbg("%s - uart_flush_read error", __func__);
 608                        return status;
 609                }
 610
 611                if (priv->len > 0) {
 612                        dbg("%s - uart_flush datalen is : %i ", __func__,
 613                            priv->len);
 614                        status = read_immediate(port, priv->buf, priv->len);
 615                        if (status != IUU_OPERATION_OK) {
 616                                dbg("%s - uart_flush_read error", __func__);
 617                                return status;
 618                        }
 619                }
 620        }
 621        dbg("%s - uart_flush_read OK!", __func__);
 622        iuu_led(port, 0, 0xF000, 0, 0xFF);
 623        return status;
 624}
 625
 626static void read_buf_callback(struct urb *urb)
 627{
 628        struct usb_serial_port *port = urb->context;
 629        unsigned char *data = urb->transfer_buffer;
 630        struct tty_struct *tty;
 631        int status = urb->status;
 632
 633        dbg("%s - status = %d", __func__, status);
 634
 635        if (status) {
 636                if (status == -EPROTO) {
 637                        /* reschedule needed */
 638                }
 639                return;
 640        }
 641
 642        dbg("%s - %i chars to write", __func__, urb->actual_length);
 643        tty = tty_port_tty_get(&port->port);
 644        if (data == NULL)
 645                dbg("%s - data is NULL !!!", __func__);
 646        if (tty && urb->actual_length && data) {
 647                tty_insert_flip_string(tty, data, urb->actual_length);
 648                tty_flip_buffer_push(tty);
 649        }
 650        tty_kref_put(tty);
 651        iuu_led_activity_on(urb);
 652}
 653
 654static int iuu_bulk_write(struct usb_serial_port *port)
 655{
 656        struct iuu_private *priv = usb_get_serial_port_data(port);
 657        unsigned long flags;
 658        int result;
 659        int i;
 660        int buf_len;
 661        char *buf_ptr = port->write_urb->transfer_buffer;
 662        dbg("%s - enter", __func__);
 663
 664        spin_lock_irqsave(&priv->lock, flags);
 665        *buf_ptr++ = IUU_UART_ESC;
 666        *buf_ptr++ = IUU_UART_TX;
 667        *buf_ptr++ = priv->writelen;
 668
 669        memcpy(buf_ptr, priv->writebuf, priv->writelen);
 670        buf_len = priv->writelen;
 671        priv->writelen = 0;
 672        spin_unlock_irqrestore(&priv->lock, flags);
 673        if (debug == 1) {
 674                for (i = 0; i < buf_len; i++)
 675                        sprintf(priv->dbgbuf + i*2 ,
 676                                "%02X", priv->writebuf[i]);
 677                priv->dbgbuf[buf_len+i*2] = 0;
 678                dbg("%s - writing %i chars : %s", __func__,
 679                    buf_len, priv->dbgbuf);
 680        }
 681        usb_fill_bulk_urb(port->write_urb, port->serial->dev,
 682                          usb_sndbulkpipe(port->serial->dev,
 683                                          port->bulk_out_endpointAddress),
 684                          port->write_urb->transfer_buffer, buf_len + 3,
 685                          iuu_rxcmd, port);
 686        result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
 687        usb_serial_port_softint(port);
 688        return result;
 689}
 690
 691static int iuu_read_buf(struct usb_serial_port *port, int len)
 692{
 693        int result;
 694        dbg("%s - enter", __func__);
 695
 696        usb_fill_bulk_urb(port->read_urb, port->serial->dev,
 697                          usb_rcvbulkpipe(port->serial->dev,
 698                                          port->bulk_in_endpointAddress),
 699                          port->read_urb->transfer_buffer, len,
 700                          read_buf_callback, port);
 701        result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
 702        return result;
 703}
 704
 705static void iuu_uart_read_callback(struct urb *urb)
 706{
 707        struct usb_serial_port *port = urb->context;
 708        struct iuu_private *priv = usb_get_serial_port_data(port);
 709        unsigned long flags;
 710        int status = urb->status;
 711        int error = 0;
 712        int len = 0;
 713        unsigned char *data = urb->transfer_buffer;
 714        priv->poll++;
 715
 716        dbg("%s - enter", __func__);
 717
 718        if (status) {
 719                dbg("%s - status = %d", __func__, status);
 720                /* error stop all */
 721                return;
 722        }
 723        if (data == NULL)
 724                dbg("%s - data is NULL !!!", __func__);
 725
 726        if (urb->actual_length == 1  && data != NULL)
 727                len = (int) data[0];
 728
 729        if (urb->actual_length > 1) {
 730                dbg("%s - urb->actual_length = %i", __func__,
 731                    urb->actual_length);
 732                error = 1;
 733                return;
 734        }
 735        /* if len > 0 call readbuf */
 736
 737        if (len > 0 && error == 0) {
 738                dbg("%s - call read buf - len to read is %i ",
 739                        __func__, len);
 740                status = iuu_read_buf(port, len);
 741                return;
 742        }
 743        /* need to update status  ? */
 744        if (priv->poll > 99) {
 745                status = iuu_status(port);
 746                priv->poll = 0;
 747                return;
 748        }
 749
 750        /* reset waiting ? */
 751
 752        if (priv->reset == 1) {
 753                status = iuu_reset(port, 0xC);
 754                return;
 755        }
 756        /* Writebuf is waiting */
 757        spin_lock_irqsave(&priv->lock, flags);
 758        if (priv->writelen > 0) {
 759                spin_unlock_irqrestore(&priv->lock, flags);
 760                status = iuu_bulk_write(port);
 761                return;
 762        }
 763        spin_unlock_irqrestore(&priv->lock, flags);
 764        /* if nothing to write call again rxcmd */
 765        dbg("%s - rxcmd recall", __func__);
 766        iuu_led_activity_off(urb);
 767}
 768
 769static int iuu_uart_write(struct tty_struct *tty, struct usb_serial_port *port,
 770                          const u8 *buf, int count)
 771{
 772        struct iuu_private *priv = usb_get_serial_port_data(port);
 773        unsigned long flags;
 774        dbg("%s - enter", __func__);
 775
 776        if (count > 256)
 777                return -ENOMEM;
 778
 779        spin_lock_irqsave(&priv->lock, flags);
 780
 781        /* fill the buffer */
 782        memcpy(priv->writebuf + priv->writelen, buf, count);
 783        priv->writelen += count;
 784        spin_unlock_irqrestore(&priv->lock, flags);
 785
 786        return count;
 787}
 788
 789static void read_rxcmd_callback(struct urb *urb)
 790{
 791        struct usb_serial_port *port = urb->context;
 792        int result;
 793        int status = urb->status;
 794
 795        dbg("%s - status = %d", __func__, status);
 796
 797        if (status) {
 798                /* error stop all */
 799                return;
 800        }
 801
 802        usb_fill_bulk_urb(port->read_urb, port->serial->dev,
 803                          usb_rcvbulkpipe(port->serial->dev,
 804                                          port->bulk_in_endpointAddress),
 805                          port->read_urb->transfer_buffer, 256,
 806                          iuu_uart_read_callback, port);
 807        result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
 808        dbg("%s - submit result = %d", __func__, result);
 809}
 810
 811static int iuu_uart_on(struct usb_serial_port *port)
 812{
 813        int status;
 814        u8 *buf;
 815
 816        buf = kmalloc(sizeof(u8) * 4, GFP_KERNEL);
 817
 818        if (!buf)
 819                return -ENOMEM;
 820
 821        buf[0] = IUU_UART_ENABLE;
 822        buf[1] = (u8) ((IUU_BAUD_9600 >> 8) & 0x00FF);
 823        buf[2] = (u8) (0x00FF & IUU_BAUD_9600);
 824        buf[3] = (u8) (0x0F0 & IUU_ONE_STOP_BIT) | (0x07 & IUU_PARITY_EVEN);
 825
 826        status = bulk_immediate(port, buf, 4);
 827        if (status != IUU_OPERATION_OK) {
 828                dbg("%s - uart_on error", __func__);
 829                goto uart_enable_failed;
 830        }
 831        /*  iuu_reset() the card after iuu_uart_on() */
 832        status = iuu_uart_flush(port);
 833        if (status != IUU_OPERATION_OK)
 834                dbg("%s - uart_flush error", __func__);
 835uart_enable_failed:
 836        kfree(buf);
 837        return status;
 838}
 839
 840/*  Diables the IUU UART (a.k.a. the Phoenix voiderface) */
 841static int iuu_uart_off(struct usb_serial_port *port)
 842{
 843        int status;
 844        u8 *buf;
 845        buf = kmalloc(1, GFP_KERNEL);
 846        if (!buf)
 847                return -ENOMEM;
 848        buf[0] = IUU_UART_DISABLE;
 849
 850        status = bulk_immediate(port, buf, 1);
 851        if (status != IUU_OPERATION_OK)
 852                dbg("%s - uart_off error", __func__);
 853
 854        kfree(buf);
 855        return status;
 856}
 857
 858static int iuu_uart_baud(struct usb_serial_port *port, u32 baud_base,
 859                         u32 *actual, u8 parity)
 860{
 861        int status;
 862        u32 baud;
 863        u8 *dataout;
 864        u8 DataCount = 0;
 865        u8 T1Frekvens = 0;
 866        u8 T1reload = 0;
 867        unsigned int T1FrekvensHZ = 0;
 868
 869        dbg("%s - enter baud_base=%d", __func__, baud_base);
 870        dataout = kmalloc(sizeof(u8) * 5, GFP_KERNEL);
 871
 872        if (!dataout)
 873                return -ENOMEM;
 874        /*baud = (((priv->clk / 35) * baud_base) / 100000); */
 875        baud = baud_base;
 876
 877        if (baud < 1200 || baud > 230400) {
 878                kfree(dataout);
 879                return IUU_INVALID_PARAMETER;
 880        }
 881        if (baud > 977) {
 882                T1Frekvens = 3;
 883                T1FrekvensHZ = 500000;
 884        }
 885
 886        if (baud > 3906) {
 887                T1Frekvens = 2;
 888                T1FrekvensHZ = 2000000;
 889        }
 890
 891        if (baud > 11718) {
 892                T1Frekvens = 1;
 893                T1FrekvensHZ = 6000000;
 894        }
 895
 896        if (baud > 46875) {
 897                T1Frekvens = 0;
 898                T1FrekvensHZ = 24000000;
 899        }
 900
 901        T1reload = 256 - (u8) (T1FrekvensHZ / (baud * 2));
 902
 903        /*  magic number here:  ENTER_FIRMWARE_UPDATE; */
 904        dataout[DataCount++] = IUU_UART_ESC;
 905        /*  magic number here:  CHANGE_BAUD; */
 906        dataout[DataCount++] = IUU_UART_CHANGE;
 907        dataout[DataCount++] = T1Frekvens;
 908        dataout[DataCount++] = T1reload;
 909
 910        *actual = (T1FrekvensHZ / (256 - T1reload)) / 2;
 911
 912        switch (parity & 0x0F) {
 913        case IUU_PARITY_NONE:
 914                dataout[DataCount++] = 0x00;
 915                break;
 916        case IUU_PARITY_EVEN:
 917                dataout[DataCount++] = 0x01;
 918                break;
 919        case IUU_PARITY_ODD:
 920                dataout[DataCount++] = 0x02;
 921                break;
 922        case IUU_PARITY_MARK:
 923                dataout[DataCount++] = 0x03;
 924                break;
 925        case IUU_PARITY_SPACE:
 926                dataout[DataCount++] = 0x04;
 927                break;
 928        default:
 929                kfree(dataout);
 930                return IUU_INVALID_PARAMETER;
 931                break;
 932        }
 933
 934        switch (parity & 0xF0) {
 935        case IUU_ONE_STOP_BIT:
 936                dataout[DataCount - 1] |= IUU_ONE_STOP_BIT;
 937                break;
 938
 939        case IUU_TWO_STOP_BITS:
 940                dataout[DataCount - 1] |= IUU_TWO_STOP_BITS;
 941                break;
 942        default:
 943                kfree(dataout);
 944                return IUU_INVALID_PARAMETER;
 945                break;
 946        }
 947
 948        status = bulk_immediate(port, dataout, DataCount);
 949        if (status != IUU_OPERATION_OK)
 950                dbg("%s - uart_off error", __func__);
 951        kfree(dataout);
 952        return status;
 953}
 954
 955static void iuu_set_termios(struct tty_struct *tty,
 956                struct usb_serial_port *port, struct ktermios *old_termios)
 957{
 958        const u32 supported_mask = CMSPAR|PARENB|PARODD;
 959        struct iuu_private *priv = usb_get_serial_port_data(port);
 960        unsigned int cflag = tty->termios->c_cflag;
 961        int status;
 962        u32 actual;
 963        u32 parity;
 964        int csize = CS7;
 965        int baud;
 966        u32 newval = cflag & supported_mask;
 967
 968        /* Just use the ospeed. ispeed should be the same. */
 969        baud = tty->termios->c_ospeed;
 970
 971        dbg("%s - enter c_ospeed or baud=%d", __func__, baud);
 972
 973        /* compute the parity parameter */
 974        parity = 0;
 975        if (cflag & CMSPAR) {   /* Using mark space */
 976                if (cflag & PARODD)
 977                        parity |= IUU_PARITY_SPACE;
 978                else
 979                        parity |= IUU_PARITY_MARK;
 980        } else if (!(cflag & PARENB)) {
 981                parity |= IUU_PARITY_NONE;
 982                csize = CS8;
 983        } else if (cflag & PARODD)
 984                parity |= IUU_PARITY_ODD;
 985        else
 986                parity |= IUU_PARITY_EVEN;
 987
 988        parity |= (cflag & CSTOPB ? IUU_TWO_STOP_BITS : IUU_ONE_STOP_BIT);
 989
 990        /* set it */
 991        status = iuu_uart_baud(port,
 992                        baud * priv->boost / 100,
 993                        &actual, parity);
 994
 995        /* set the termios value to the real one, so the user now what has
 996         * changed. We support few fields so its easies to copy the old hw
 997         * settings back over and then adjust them
 998         */
 999        if (old_termios)
1000                tty_termios_copy_hw(tty->termios, old_termios);
1001        if (status != 0)        /* Set failed - return old bits */
1002                return;
1003        /* Re-encode speed, parity and csize */
1004        tty_encode_baud_rate(tty, baud, baud);
1005        tty->termios->c_cflag &= ~(supported_mask|CSIZE);
1006        tty->termios->c_cflag |= newval | csize;
1007}
1008
1009static void iuu_close(struct usb_serial_port *port)
1010{
1011        /* iuu_led (port,255,0,0,0); */
1012        struct usb_serial *serial;
1013
1014        serial = port->serial;
1015        if (!serial)
1016                return;
1017
1018        dbg("%s - port %d", __func__, port->number);
1019
1020        iuu_uart_off(port);
1021        if (serial->dev) {
1022                /* free writebuf */
1023                /* shutdown our urbs */
1024                dbg("%s - shutting down urbs", __func__);
1025                usb_kill_urb(port->write_urb);
1026                usb_kill_urb(port->read_urb);
1027                usb_kill_urb(port->interrupt_in_urb);
1028                iuu_led(port, 0, 0, 0xF000, 0xFF);
1029        }
1030}
1031
1032static void iuu_init_termios(struct tty_struct *tty)
1033{
1034        dbg("%s - enter", __func__);
1035        *(tty->termios) = tty_std_termios;
1036        tty->termios->c_cflag = CLOCAL | CREAD | CS8 | B9600
1037                                | TIOCM_CTS | CSTOPB | PARENB;
1038        tty->termios->c_ispeed = 9600;
1039        tty->termios->c_ospeed = 9600;
1040        tty->termios->c_lflag = 0;
1041        tty->termios->c_oflag = 0;
1042        tty->termios->c_iflag = 0;
1043}
1044
1045static int iuu_open(struct tty_struct *tty, struct usb_serial_port *port)
1046{
1047        struct usb_serial *serial = port->serial;
1048        u8 *buf;
1049        int result;
1050        int baud;
1051        u32 actual;
1052        struct iuu_private *priv = usb_get_serial_port_data(port);
1053
1054        baud = tty->termios->c_ospeed;
1055        tty->termios->c_ispeed = baud;
1056        /* Re-encode speed */
1057        tty_encode_baud_rate(tty, baud, baud);
1058
1059        dbg("%s -  port %d, baud %d", __func__, port->number, baud);
1060        usb_clear_halt(serial->dev, port->write_urb->pipe);
1061        usb_clear_halt(serial->dev, port->read_urb->pipe);
1062
1063        buf = kmalloc(10, GFP_KERNEL);
1064        if (buf == NULL)
1065                return -ENOMEM;
1066
1067        priv->poll = 0;
1068
1069        /* initialize writebuf */
1070#define FISH(a, b, c, d) do { \
1071        result = usb_control_msg(port->serial->dev,     \
1072                                usb_rcvctrlpipe(port->serial->dev, 0),  \
1073                                b, a, c, d, buf, 1, 1000); \
1074        dbg("0x%x:0x%x:0x%x:0x%x  %d - %x", a, b, c, d, result, \
1075                                buf[0]); } while (0);
1076
1077#define SOUP(a, b, c, d)  do { \
1078        result = usb_control_msg(port->serial->dev,     \
1079                                usb_sndctrlpipe(port->serial->dev, 0),  \
1080                                b, a, c, d, NULL, 0, 1000); \
1081        dbg("0x%x:0x%x:0x%x:0x%x  %d", a, b, c, d, result); } while (0)
1082
1083        /*  This is not UART related but IUU USB driver related or something */
1084        /*  like that. Basically no IUU will accept any commands from the USB */
1085        /*  host unless it has received the following message */
1086        /* sprintf(buf ,"%c%c%c%c",0x03,0x02,0x02,0x0); */
1087
1088        SOUP(0x03, 0x02, 0x02, 0x0);
1089        kfree(buf);
1090        iuu_led(port, 0xF000, 0xF000, 0, 0xFF);
1091        iuu_uart_on(port);
1092        if (boost < 100)
1093                boost = 100;
1094        priv->boost = boost;
1095        priv->baud = baud;
1096        switch (clockmode) {
1097        case 2:         /*  3.680 Mhz */
1098                priv->clk = IUU_CLK_3680000;
1099                iuu_clk(port, IUU_CLK_3680000 * boost / 100);
1100                result =
1101                    iuu_uart_baud(port, baud * boost / 100, &actual,
1102                                  IUU_PARITY_EVEN);
1103                break;
1104        case 3:         /*  6.00 Mhz */
1105                iuu_clk(port, IUU_CLK_6000000 * boost / 100);
1106                priv->clk = IUU_CLK_6000000;
1107                /* Ratio of 6000000 to 3500000 for baud 9600 */
1108                result =
1109                    iuu_uart_baud(port, 16457 * boost / 100, &actual,
1110                                  IUU_PARITY_EVEN);
1111                break;
1112        default:                /*  3.579 Mhz */
1113                iuu_clk(port, IUU_CLK_3579000 * boost / 100);
1114                priv->clk = IUU_CLK_3579000;
1115                result =
1116                    iuu_uart_baud(port, baud * boost / 100, &actual,
1117                                  IUU_PARITY_EVEN);
1118        }
1119
1120        /* set the cardin cardout signals */
1121        switch (cdmode) {
1122        case 0:
1123                iuu_cardin = 0;
1124                iuu_cardout = 0;
1125                break;
1126        case 1:
1127                iuu_cardin = TIOCM_CD;
1128                iuu_cardout =  0;
1129                break;
1130        case 2:
1131                iuu_cardin = 0;
1132                iuu_cardout = TIOCM_CD;
1133                break;
1134        case 3:
1135                iuu_cardin = TIOCM_DSR;
1136                iuu_cardout = 0;
1137                break;
1138        case 4:
1139                iuu_cardin = 0;
1140                iuu_cardout = TIOCM_DSR;
1141                break;
1142        case 5:
1143                iuu_cardin = TIOCM_CTS;
1144                iuu_cardout = 0;
1145                break;
1146        case 6:
1147                iuu_cardin = 0;
1148                iuu_cardout = TIOCM_CTS;
1149                break;
1150        case 7:
1151                iuu_cardin = TIOCM_RNG;
1152                iuu_cardout = 0;
1153                break;
1154        case 8:
1155                iuu_cardin = 0;
1156                iuu_cardout = TIOCM_RNG;
1157        }
1158
1159        iuu_uart_flush(port);
1160
1161        dbg("%s - initialization done", __func__);
1162
1163        memset(port->write_urb->transfer_buffer, IUU_UART_RX, 1);
1164        usb_fill_bulk_urb(port->write_urb, port->serial->dev,
1165                          usb_sndbulkpipe(port->serial->dev,
1166                                          port->bulk_out_endpointAddress),
1167                          port->write_urb->transfer_buffer, 1,
1168                          read_rxcmd_callback, port);
1169        result = usb_submit_urb(port->write_urb, GFP_KERNEL);
1170        if (result) {
1171                dev_err(&port->dev, "%s - failed submitting read urb,"
1172                        " error %d\n", __func__, result);
1173                iuu_close(port);
1174        } else {
1175                dbg("%s - rxcmd OK", __func__);
1176        }
1177
1178        return result;
1179}
1180
1181/* how to change VCC */
1182static int iuu_vcc_set(struct usb_serial_port *port, unsigned int vcc)
1183{
1184        int status;
1185        u8 *buf;
1186
1187        buf = kmalloc(5, GFP_KERNEL);
1188        if (!buf)
1189                return -ENOMEM;
1190
1191        dbg("%s - enter", __func__);
1192
1193        buf[0] = IUU_SET_VCC;
1194        buf[1] = vcc & 0xFF;
1195        buf[2] = (vcc >> 8) & 0xFF;
1196        buf[3] = (vcc >> 16) & 0xFF;
1197        buf[4] = (vcc >> 24) & 0xFF;
1198
1199        status = bulk_immediate(port, buf, 5);
1200        kfree(buf);
1201
1202        if (status != IUU_OPERATION_OK)
1203                dbg("%s - vcc error status = %2x", __func__, status);
1204        else
1205                dbg("%s - vcc OK !", __func__);
1206
1207        return status;
1208}
1209
1210/*
1211 * Sysfs Attributes
1212 */
1213
1214static ssize_t show_vcc_mode(struct device *dev,
1215        struct device_attribute *attr, char *buf)
1216{
1217        struct usb_serial_port *port = to_usb_serial_port(dev);
1218        struct iuu_private *priv = usb_get_serial_port_data(port);
1219
1220        return sprintf(buf, "%d\n", priv->vcc);
1221}
1222
1223static ssize_t store_vcc_mode(struct device *dev,
1224        struct device_attribute *attr, const char *buf, size_t count)
1225{
1226        struct usb_serial_port *port = to_usb_serial_port(dev);
1227        struct iuu_private *priv = usb_get_serial_port_data(port);
1228        unsigned long v;
1229
1230        if (strict_strtoul(buf, 10, &v)) {
1231                dev_err(dev, "%s - vcc_mode: %s is not a unsigned long\n",
1232                                __func__, buf);
1233                goto fail_store_vcc_mode;
1234        }
1235
1236        dbg("%s: setting vcc_mode = %ld", __func__, v);
1237
1238        if ((v != 3) && (v != 5)) {
1239                dev_err(dev, "%s - vcc_mode %ld is invalid\n", __func__, v);
1240        } else {
1241                iuu_vcc_set(port, v);
1242                priv->vcc = v;
1243        }
1244fail_store_vcc_mode:
1245        return count;
1246}
1247
1248static DEVICE_ATTR(vcc_mode, S_IRUSR | S_IWUSR, show_vcc_mode,
1249        store_vcc_mode);
1250
1251static int iuu_create_sysfs_attrs(struct usb_serial_port *port)
1252{
1253        dbg("%s", __func__);
1254
1255        return device_create_file(&port->dev, &dev_attr_vcc_mode);
1256}
1257
1258static int iuu_remove_sysfs_attrs(struct usb_serial_port *port)
1259{
1260        dbg("%s", __func__);
1261
1262        device_remove_file(&port->dev, &dev_attr_vcc_mode);
1263        return 0;
1264}
1265
1266/*
1267 * End Sysfs Attributes
1268 */
1269
1270static struct usb_serial_driver iuu_device = {
1271        .driver = {
1272                   .owner = THIS_MODULE,
1273                   .name = "iuu_phoenix",
1274                   },
1275        .id_table = id_table,
1276        .num_ports = 1,
1277        .bulk_in_size = 512,
1278        .bulk_out_size = 512,
1279        .port_probe = iuu_create_sysfs_attrs,
1280        .port_remove = iuu_remove_sysfs_attrs,
1281        .open = iuu_open,
1282        .close = iuu_close,
1283        .write = iuu_uart_write,
1284        .read_bulk_callback = iuu_uart_read_callback,
1285        .tiocmget = iuu_tiocmget,
1286        .tiocmset = iuu_tiocmset,
1287        .set_termios = iuu_set_termios,
1288        .init_termios = iuu_init_termios,
1289        .attach = iuu_startup,
1290        .release = iuu_release,
1291};
1292
1293static struct usb_serial_driver * const serial_drivers[] = {
1294        &iuu_device, NULL
1295};
1296
1297module_usb_serial_driver(iuu_driver, serial_drivers);
1298
1299MODULE_AUTHOR("Alain Degreffe eczema@ecze.com");
1300
1301MODULE_DESCRIPTION(DRIVER_DESC);
1302MODULE_LICENSE("GPL");
1303
1304MODULE_VERSION(DRIVER_VERSION);
1305module_param(debug, bool, S_IRUGO | S_IWUSR);
1306MODULE_PARM_DESC(debug, "Debug enabled or not");
1307
1308module_param(xmas, bool, S_IRUGO | S_IWUSR);
1309MODULE_PARM_DESC(xmas, "Xmas colors enabled or not");
1310
1311module_param(boost, int, S_IRUGO | S_IWUSR);
1312MODULE_PARM_DESC(boost, "Card overclock boost (in percent 100-500)");
1313
1314module_param(clockmode, int, S_IRUGO | S_IWUSR);
1315MODULE_PARM_DESC(clockmode, "Card clock mode (1=3.579 MHz, 2=3.680 MHz, "
1316                "3=6 Mhz)");
1317
1318module_param(cdmode, int, S_IRUGO | S_IWUSR);
1319MODULE_PARM_DESC(cdmode, "Card detect mode (0=none, 1=CD, 2=!CD, 3=DSR, "
1320                 "4=!DSR, 5=CTS, 6=!CTS, 7=RING, 8=!RING)");
1321
1322module_param(vcc_default, int, S_IRUGO | S_IWUSR);
1323MODULE_PARM_DESC(vcc_default, "Set default VCC (either 3 for 3.3V or 5 "
1324                "for 5V). Default to 5.");
1325