/*
 * This file is subject to the terms and conditions of the GNU General Public
 * License.  See the file "COPYING" in the main directory of this archive
 * for more details.
 *
 * Copyright (C) 2007 MIPS Technologies, Inc.
 * Copyright (C) 2007 Ralf Baechle <ralf@linux-mips.org>
 */
#include <linux/clockchips.h>
#include <linux/interrupt.h>
#include <linux/percpu.h>
#include <linux/smp.h>
#include <linux/irq.h>

#include <asm/smtc_ipi.h>
#include <asm/time.h>
#include <asm/cevt-r4k.h>

/*
 * The SMTC Kernel for the 34K, 1004K, et. al. replaces several
 * of these routines with SMTC-specific variants.
 */

#ifndef CONFIG_MIPS_MT_SMTC

static int mips_next_event(unsigned long delta,
                           struct clock_event_device *evt)
{
        unsigned int cnt;
        int res;

        cnt = read_c0_count();
        cnt += delta;
        write_c0_compare(cnt);
        res = ((int)(read_c0_count() - cnt) >= 0) ? -ETIME : 0;
        return res;
}

#endif /* CONFIG_MIPS_MT_SMTC */

void mips_set_clock_mode(enum clock_event_mode mode,
                                struct clock_event_device *evt)
{
        /* Nothing to do ...  */
}

DEFINE_PER_CPU(struct clock_event_device, mips_clockevent_device);
int cp0_timer_irq_installed;

#ifndef CONFIG_MIPS_MT_SMTC

irqreturn_t c0_compare_interrupt(int irq, void *dev_id)
{
        const int r2 = cpu_has_mips_r2;
        struct clock_event_device *cd;
        int cpu = smp_processor_id();

        /*
         * Suckage alert:
         * Before R2 of the architecture there was no way to see if a
         * performance counter interrupt was pending, so we have to run
         * the performance counter interrupt handler anyway.
         */
        if (handle_perf_irq(r2))
                goto out;

        /*
         * The same applies to performance counter interrupts.  But with the
         * above we now know that the reason we got here must be a timer
         * interrupt.  Being the paranoiacs we are we check anyway.
         */
        if (!r2 || (read_c0_cause() & (1 << 30))) {
                /* Clear Count/Compare Interrupt */
                write_c0_compare(read_c0_compare());
                cd = &per_cpu(mips_clockevent_device, cpu);
                cd->event_handler(cd);
        }

out:
        return IRQ_HANDLED;
}

#endif /* Not CONFIG_MIPS_MT_SMTC */

struct irqaction c0_compare_irqaction = {
        .handler = c0_compare_interrupt,
        .flags = IRQF_PERCPU | IRQF_TIMER,
        .name = "timer",
};


void mips_event_handler(struct clock_event_device *dev)
{
}

/*
 * FIXME: This doesn't hold for the relocated E9000 compare interrupt.
 */
static int c0_compare_int_pending(void)
{
        return (read_c0_cause() >> cp0_compare_irq_shift) & (1ul << CAUSEB_IP);
}

/*
 * Compare interrupt can be routed and latched outside the core,
 * so wait up to worst case number of cycle counter ticks for timer interrupt
 * changes to propagate to the cause register.
 */
#define COMPARE_INT_SEEN_TICKS 50

int c0_compare_int_usable(void)
{
        unsigned int delta;
        unsigned int cnt;

        /*
         * IP7 already pending?  Try to clear it by acking the timer.
         */
        if (c0_compare_int_pending()) {
                cnt = read_c0_count();
                write_c0_compare(cnt);
                back_to_back_c0_hazard();
                while (read_c0_count() < (cnt  + COMPARE_INT_SEEN_TICKS))
                        if (!c0_compare_int_pending())
                                break;
                if (c0_compare_int_pending())
                        return 0;
        }

        for (delta = 0x10; delta <= 0x400000; delta <<= 1) {
                cnt = read_c0_count();
                cnt += delta;
                write_c0_compare(cnt);
                back_to_back_c0_hazard();
                if ((int)(read_c0_count() - cnt) < 0)
                    break;
                /* increase delta if the timer was already expired */
        }

        while ((int)(read_c0_count() - cnt) <= 0)
                ;       /* Wait for expiry  */

        while (read_c0_count() < (cnt + COMPARE_INT_SEEN_TICKS))
                if (c0_compare_int_pending())
                        break;
        if (!c0_compare_int_pending())
                return 0;
        cnt = read_c0_count();
        write_c0_compare(cnt);
        back_to_back_c0_hazard();
        while (read_c0_count() < (cnt + COMPARE_INT_SEEN_TICKS))
                if (!c0_compare_int_pending())
                        break;
        if (c0_compare_int_pending())
                return 0;

        /*
         * Feels like a real count / compare timer.
         */
        return 1;
}

#ifndef CONFIG_MIPS_MT_SMTC

int __cpuinit r4k_clockevent_init(void)
{
        unsigned int cpu = smp_processor_id();
        struct clock_event_device *cd;
        unsigned int irq;

        if (!cpu_has_counter || !mips_hpt_frequency)
                return -ENXIO;

        if (!c0_compare_int_usable())
                return -ENXIO;

        /*
         * With vectored interrupts things are getting platform specific.
         * get_c0_compare_int is a hook to allow a platform to return the
         * interrupt number of it's liking.
         */
        irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq;
        if (get_c0_compare_int)
                irq = get_c0_compare_int();

        cd = &per_cpu(mips_clockevent_device, cpu);

        cd->name                = "MIPS";
        cd->features            = CLOCK_EVT_FEAT_ONESHOT;

        clockevent_set_clock(cd, mips_hpt_frequency);

        /* Calculate the min / max delta */
        cd->max_delta_ns        = clockevent_delta2ns(0x7fffffff, cd);
        cd->min_delta_ns        = clockevent_delta2ns(0x300, cd);

        cd->rating              = 300;
        cd->irq                 = irq;
        cd->cpumask             = cpumask_of(cpu);
        cd->set_next_event      = mips_next_event;
        cd->set_mode            = mips_set_clock_mode;
        cd->event_handler       = mips_event_handler;

        clockevents_register_device(cd);

        if (cp0_timer_irq_installed)
                return 0;

        cp0_timer_irq_installed = 1;

        setup_irq(irq, &c0_compare_irqaction);

        return 0;
}

#endif /* Not CONFIG_MIPS_MT_SMTC */